Contents Project: Model: Chk d: Date:

Transcription

1 Contents Model No. Specifications Selection Performance Dimensions Sectional Chart Curve Pump Motor Data View DWU6.4S DWU6.75S - DWU6.4S DWU6.75S DWU6.S DWU6.5S DWU6.4 - DWU6.75 DWU6. DWU6.5 - DWU6. -4 DWFU6.4S DWFU6.75S - DWFU6.4S DWFU6.75S DWFU6.S DWFU6.5S DWFU6.4 - DWFU6.75 DWFU6. DWFU6.5 - DWFU6. -4 DWXU6.4S DWXU6.75S DWXU6.4S -5 DWXU6.75S DWXU6.S DWXU6.5S DWXU6.4-5 DWXU6.75 DWXU6. DWXU6.5-6 DWXU6. -7 DWXFU6.4S DWXFU6.75S DWXFU6.4S -5 DWXFU6.75S DWXFU6.S DWXFU6.5S DWXFU6.4-5 DWXFU6.75 DWXFU6. DWXFU6.5-6 DWXFU (80) 7-05 (80) 7-97 (fax) rev. 09/08

2 Contents (continued) Model No. Specifications Selection Performance Dimensions Sectional Chart Curve Pump Motor Data View DWAU6.4S DWAU6.75S DWAU6.4S DWAU6.75S DWAU6.S - DWFAU6.4S DWFAU6.75S DWFAU6.4S DWFAU6.75S DWFAU6.S - DWXAU6.4S DWXAU6.75S DWXAU6.4S DWXAU6.75S DWXAU6.S -6 DWXFAU6.4S DWXFAU6.75S DWXFAU6.4S DWXFAU6.75S DWXFAU6.S -6 Quick Discharge Connector System Mechanical Seal Sectional View -57 Cable Entry System Detail -58 Mechanical Seal and Ball Bearing Data -59 Capacitor Data -59 Submergence Chart (80) 7-05 (80) 7-97 (fax) rev. 09/08

3 Model Designation DW U 6.5 S DISCHARGE SIZE mm mm " MODEL TYPE DW single channel, threaded connection, manual DWA single channel, threaded connection, automatic DWF single channel, flanged connection, manual DWFA single channel, flanged connection, automatic DWX vortex type, threaded connection, manual DWXA vortex type, threaded connection, automatic DWXF vortex type, flanged connection, manual DWXFA vortex type, flanged connection, automatic GEOGRAPHIC DESIGNATION U U.S.A. market HERTZ 6 60 RATED KW.4 /HP.75 HP..5HP.5 HP. HP PHASE none three phase S single phase VOLTAGE (none) *Note: The Model DW(A)(F)U, DWX(A)(F)U is listed by the Canadian Standards Association (CSA) as certified (HP excluded) (80) 7-05 (80) 7-97 (fax) rev. 09/08

4 Specifications Manual Automatic Discharge Size/Connection '' NPT or '' ANSI Flanged Range of HP / HP to HP / HP to / HP Range of Performance Capacity 8 to 5 GPM Capacity 8 to 80 GPM Head 8 to 74 feet Head 8 to 54 feet Limitation Maximum Water Temperature 04 F ( C) Synchronous Speed 600 RPM Materials Casing 04L Stainless Steel Impeller 04L Stainless Steel Shaft 04L Stainless Steel Motor Frame 04L Stainless Steel Fastener 04L Stainless Steel Mechanical Seal Double Mechanical Seal Material Upper Side Carbon/Ceramic/NBR Material Lower Side Silicon Carbide/Silicon Carbide/FPM Impeller Type Single Channel/Vortex Bearing Sealed Ball Bearing Motor Air-filled, Insulation Class F Single Phase 5 V ( /, HP), 0V 5 V ( /, - HP) 0V ( /, - /HP) Three Phase 0V, 460V Motor Protection Built-in Overload Protection (Single phase models) Submersible Cable 5 ft. Consult factory for additional cable lengths. Accessories QDC System *Note: HP, -phase and HP, -phase units have a cast iron intermediate bracket. The Model DW(A)(F)U, DWX(A)(F)U is listed by the Canadian Standards Association (CSA) as certified (HP excluded) (80) 7-05 (80) 7-97 (fax) rev. 05/

5 Selection Chart Model DW(A)U DWF(A)U Single Channel Impeller m ft DWU6. HP DWFU6. HP TOTAL HEAD. DW(A)U6. ½HP DWF(A)U6. ½HP (manual operation) ( phase only) DWU6.5 HP (manual operation only) DWFU6.5 HP 9. 0 DW(A)U6.75 HP DWF(A)U6.75 HP 6. 0 DW(A)U6.4 ½HP DWF(A)U6.4 ½HP US GPM m /min CAPACITY -0 (80) 7-05 (80) 7-97 (fax) rev. 09/08

6 Selection Chart Model DWX(A)U DWXF(A)U Vortex ImpellerProject: Model: Chk d: Date: 4.4 m ft DWXU6. HP DWXFU6. HP TOTAL HEAD DWXU6.5 HP DWXFU6.5 HP DWX(A)U6. ½HP DWXF(A)U6. ½HP (manual operation) ( phase only) (manual operation only) 6. 0 DWX(A)U6.75 HP DWXF(A)U6.75 HP. 0 DWX(A)U6.4 ½HP DWXF(A)U6.4 ½HP US GPM m /min CAPACITY - (80) 7-05 (80) 7-97 (fax) rev. 09/08

7 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: DW6.4 ( /HP) Synchronous Speed: 600 RPM inch Discharge CURVE NO. DW SOLID DIA.: inch % hh 5 0 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM CAP ACITY m /min 0 T.D.H. BHP DW6.75 (HP) Synchronous Speed: 600 RPM 0.5 HP SHAFT POWER 0.5 kw SHAFT POWER inch Discharge CURVE NO. DW SOLID DIA.: inch T.D.H 0 0 % hh 5 0 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM CAP ACITY m /min 0 BHP HP SHAFT POWER 0.5 kw SHAFT POWER - (80) 7-05 (80) 7-97 (fax) rev. 09/08

8 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: DW6. ( /HP) Synchronous Speed: 600 RPM 60 CURVE NO. DW SOLID DIA.: inch inch Discharge T.D.H. 0 0 % hh 5 0 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM CAP ACITY m /min 0 I BHP HP SHAFT POWER kw SHAFT POWER DW6.5 (HP) Synchronous Speed: 600 RPM inch Discharge CURVE NO. DW SOLID DIA.: inch I. 0 0 % hh 0 0 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM CAP ACITY m /min 0 BHP T.D.H HP SHAFT POWER kw SHAFT POWER - (80) 7-05 (80) 7-97 (fax) rev. 09/08

9 Performance Curves DW6. (HP) Synchronous Speed: 600 RPM inch Discharge Curve No.: EPE DW 008-KL. 70 Solid Dia.: inch T.D.H BHP Efficiency (%) 0 Total Head (m).05 Total Head (ft) 0 HP Shaft Power.75 kw Shaft Power Capacity (USGPM) Capacity (m /min) (80) 7-05 (80) 7-97 (fax) rev. 09/08

10 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: DWX6.4 ( /HP) Synchronous Speed: 600 RPM inch Discharge 5 CURVE NO. DWX SOLID DIA.: inch T.D.H % hh 5 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM BHP HP SHAFT POWER 0.5 kw SHAFT POWER CAP ACITY m /min DWX6.75 (HP) Synchronous Speed: 600 RPM inch Discharge CURVE NO. DWX SOLID DIA.: inch % hh 5 0 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM 0 T.D.H BHP HP SHAFT POWER 0.5 kw SHAFT POWER CAP ACITY m /min (80) 7-05 (80) 7-97 (fax) rev. 09/08

11 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: DWX6. ( /HP) Synchronous Speed: 600 RPM inch Discharge CURVE NO. DWX SOLID DIA.: inch 0 0 T.D.H. 0 0 % hh 5 0 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM CAP ACITY m /min 0 BHP DWX6.5 (HP) Synchronous Speed: 600 RPM HP SHAFT POWER kw SHAFT POWER inch Discharge CURVE NO. DWX SOLID DIA.: inch 5 T.D.H % hh 5 0 TOT AL HEAD m hh TOT AL HEAD fthh CAP ACITY USGPM CAP ACITY m /min 0 BHP HP SHAFT POWER kw SHAFT POWER -6 (80) 7-05 (80) 7-97 (fax) rev. 09/08

12 Performance Curves DWX6. (HP) Synchronous Speed: 600 RPM inch Discharge. 70 Curve No.: EPE DWX008-KL Solid Dia.: inch T.D.H BHP Efficiency (%) 0.05 Total Head (m) Total Head (ft) 0 HP Shaft Power.75 kw Shaft Power Capacity (USGPM) Capacity (m /min) (80) 7-05 (80) 7-97 (fax) rev. 09/08

13 DWU Dominator Dimensions Model DWU Manual Operation Pumps Unit: inch (mm) H 5 /4" (4) 7 /8" (98) " () NPT" () ø" () ø7 /" (90) 9" (9) Note: Three phase motors are equipped with a Power Cable and a Thermal Protection Cable Phase Size ø Model Output Pump Weight kw HP H Lbs (kg) DWU6.4S / 5 /8 (5) 5 (6) Single " (mm) DWU6.75S DWU6.4S DWU6.75S / /6 (580) 9 /8 (485) 0 /4 (55) (8) 5 (6 (8) DWU6.S. / 0 /4 (55) 44 (0) DWU6.5S.5 4 (60) 5 () DWU6.4 / 9 /8 (485) (5) Three " (mm) DWU6.75 DWU6. DWU / 9 /8 (485) 0 /4 (55) 0 /4 (55) 5 (6) (8) 44 (0) DWU6.. 7 /6 (545) 55 (5) -8 (80) 7-05 (80) 7-97 (fax) rev. 0/

14 DWFU Dominator Dimensions Model DWFU Manual Operation Pumps Unit: inch (mm) 4 /6" (9) x /6" (0.5) H 5 5 /6" (5) Longitudinal Hole 45 7 /8" (98) " () ø" () ø6 /8" (55) ø4 /4" (0) ø4 5 /6" (5) ø" () 5 /8" (6) ø7 /" (90) Disch. Flange 9 /6" (0) lbs ANSI R.F. Equivalent Note: Three phase motors are equipped with a Power Cable and a Thermal Protection Cable Phase Size ø Model Output Pump Weight kw HP H Lbs (kg) DWFU6.4S / 5 /8 (5) 7 (7) Single " (mm) DWFU6.75S DWFU6.4S DWFU6.75S / /6 (580) 9 /8 (485) 0 /4 (55) 4 (9) 7 (7) 4 (9) DWFU6.S. / 0 /4 (55) 46 () DWFU6.5S.5 4 (60) 5 (4) DWFU6.4 / 9 /8 (485) 5 (6) Three " (mm) DWFU6.75 DWFU6. DWFU / 9 /8 (485) 0 /4 (55) 0 /4 (55) 7 (7) 4 (9) 46 () DWFU6.. 7 /6 (545) 57 (6) -9 (t) (f) rev. 0/

15 DWXU Dominator Dimensions Model DWXU Manual Operation Pumps Unit: inch (mm) H 5 /4" (4) 7 /8" (98) " () NPT" () ø" () ø7 /" (90) 9" (9) Note: Three phase motors are equipped with a Power Cable and a Thermal Protection Cable Phase Size ø Model Output Pump Weight kw HP H Lbs (kg) DWXU6.4S / 5 /8 (5) 5 (6) Single " (mm) DWXU6.75S DWXU6.4S DWXU6.75S / /6 (580) 9 /8 (485) 0 /4 (55) (8) 5 (6) (8) DWXU6.S. / 0 /4 (55) 44 (0) DWXU6.5S.5 4 (60) 5 () DWXU6.4 / 9 /8 (485) (5) Three " (mm) DWXU6.75 DWXU6. DWXU / 9 /8 (485) 0 /4 (55) 0 /4 (55) 5 (6) (8) 44 (0) DWXU6.. 7 /6 (545) 55 (5) - (80) 7-05 (80) 7-97 (fax) rev. 0/

16 DWXFU Dominator Dimensions Model DWXFU Manual Operation Pumps Unit: inch (mm) H 5 5 /6" (5) 4 /6" (9) x /6" (0.5) Longitudinal Hole 45 7 /8" (98) " () ø" () ø6 /8" (55) ø4 /4" (0) ø4 5 /6" (5) ø" () ø7 /" (90) 9 /6" (0) 5 /8" (6) Disch. Flange lbs ANSI R.F. Equivalent Note: Three phase motors are equipped with a Power Cable and a Thermal Protection Cable Phase Size ø Model Output Pump Weight kw HP H Lbs (kg) DWXFU6.4S / 5 /8 (5) 7 (7) DWXFU6.75S /6 (580) 4 (9) Single " (mm) DWXFU6.4S DWXFU6.75S / 9 /8 (485) 0 /4 (55) 7 (7) 4 (9) DWXFU6.S. / 0 /4 (55) 46 () DWXFU6.5S.5 4 (60) 5 (4) DWXFU6.4 / 9 /8 (485) 5 (6) Three " (mm) DWXFU6.75 DWXFU6. DWXFU / 9 /8 (485) 0 /4 (55) 0 /4 (55) 7 (7) 4 (9) 46 () DWXFU6.. 7 /6 (545) 57 (6) -4 (t) (f) rev. 0/

17 DWAU, DWXAU Dominator Dimensions Model DWAU Model DWXAU Automatic Operation Pumps Unit: inch (mm) 5V : 0 /4" (60) 08/0V : 7 7 /8" (00) H 5 /4" (4) 7 /8" (98) " () NPT" () ø" () ø7 /" (90) 9" (9) Model DWAU Phase Size ø Model Output Pump Weight kw HP H Lbs (kg) DWAU6.4S / 5 /8 (5) 5 (6) Single " (mm) DWAU6.75S DWAU6.4S DWAU6.75S / /6 (580) 9 /8 (485) 0 /4 (55) (8) 5 (6) (8) DWAU6.S. / 0 /4 (55) 44 (0) Model DWXAU Phase Single Size ø " (mm) Model DWXAU6.4S DWXAU6.75S DWXAU6.4S DWXAU6.75S DWXAU6.S Output Pump Weight kw HP H Lbs (kg) / 5 /8 (5) 5 (6) /6 (580) (8) / 9 /8 (485) 5 (6) 0 /4 (55) (8). / 0 /4 (55) 44 (0) -4 (80) 7-05 (80) 7-97 (fax) rev. 09/08

18 DWFAU, DWXFAU Dominator Dimensions Model DWFAU Model DWXFAU Automatic Operation Pumps Unit: inch (mm) 5V : 0 /4" (60) 08/0V : 7 7 /8" (00) 4 /6" (9) x /6" (0.5) Longitudinal Hole 7 /8" (98) " () H 5 5 /6" (5) ø" () ø6 /8" (55) 45 ø4 /4" (0) ø4 5 /6" (5) ø" () 5 /8" (6) ø7 /" (90) 9 /6" (0) Disch. Flange lbs ANSI R.F. Equivalent Model DWFAU Phase Size ø Model Output Pump Weight kw HP H Lbs (kg) DWFAU6.4S / 5 /8 (5) 7 (7) Single " (mm) DWFAU6.75S DWFAU6.4S DWFAU6.75S / /6 (580) 9 /8 (485) 0 /4 (55) 4 (9) 7 (7) 4 (9) DWFAU6.S. / 0 /4 (55) 46 () Model DWXFAU Phase Size ø Model Output Pump Weight kw HP H Lbs (kg) DWXFAU6.4S / 5 /8 (5) 7 (7) Single " (mm) DWXFAU6.75S DWXFAU6.4S DWXFAU6.75S / /6 (580) 9 /8 (485) 0 /4 (55) 4 (9) 7 (7) 4 (9) DWXFAU6.S. / 0 /4 (55) 46 () -4 (80) 7-05 (80) 7-97 (fax) rev. 09/08

19 Dimensions Model DWFU with Quick Discharge Connector Guide pipe support 5 / () /8 (60) Bolt / x /6 (x0) 9 /6 () 5 /6 () /4 (70) /6 (56) 9 /6 (90) /4 (70) SGP (W) " M Q 4 H holes P.D.C.J. ø M N N Minimum low water level, continuous duty, non-automatic operation ø -K S P R U 5 /6 (00) Anchor Bolts 5 /8 (6) B C A f e ø t (n) QTY - (h) HOLES ø Flange (ANSI 5 PSI F.F) e 4 /4 f 6 t 5 /8 n 4 inch h /4 Dimensions: inch ø e f 5 t 6 n 4 mm h 9 MODEL LM A 7 /6 B 5 /4 C /8 H / J 4 /4 K M 5 5 /6 M /8 N 4 / N 9 /6 P 5 5 /6 Q 9 /6 R 9 /6 S 6 / U /6 QDC WGHT Lb 5 Dimensions: mm MODEL LM A 95 B C 80 H J 0 K M 5 M 80 N 5 N P 5 Q 0 R 0 S 65 U 55 QDC WGHT kg (80) 7-05 (80) 7-97 (fax) rev. 09/08

20 Dimensions Models LM Part No. Part Name Material Model LM Model LME ASTM, AISI, CODE Model LM Model LME No. for Unit Gasket Bolt & Nut Bolt & Nut Nut Anchor Bolt Set Screw Guide Pin Washer Connector Body Support Bar Guide Support Plate 04 Stainless 04 Stainless 04 Stainless Steel 04 Stainless Steel 04 Stainless Cast Iron Cast Iron Stainless Steel Brass Bronze AISI04 AISI04 AISI04 A8 Grade D AISI04 A8 Grade D AISI A48 Class 0 A48 Class 0 AISI A8 Grade D B6 C700 B584 C (80) 7-05 (80) 7-97 (fax) rev. 09/08

21 DWU, DWAU, DWXU, DWXAU Dominator Sectional View Model DWU, DWXU Manual Type Model DWAU, DWXAU Automatic Type DWU, DWAU Single Phase Motor 6 Three Phase Motor DWXU, DWXAU Part No Remarks: Part Name Casing Casing Cover Disk Seal Support Impeller Key Float Switch Stay Casing Ring Mechanical Seal O-ring O-ring O-ring Gasket Impeller Bolt Nut Washer Washer Washer Material 04 SS 04 SS 04 SS 04 SS 04 SS 04 SS Viton Viton Viton Viton Viton 04 SS 04 SS 04 SS 04 SS 04 SS ASTM, AISI Code AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 No. for Unit Set 4 4 Part No Part Name Lifting Hanger Float Switch Rotor Stator Capacitor Submersible Cable Sensor Cable Motor Frame Bracket Bracket Shaft Motor Protector Bracket Motor Protector Ball Bearing Ball Bearing Cable Connector Cable Connector External Terminal Capacitor Holder Recommended spare parts. Part No. 095, 6, 86- are only installed on automatic operation models. Part No. 07 is only installed on model DW/DWA/DWF/DWFA single channel impeller. Part No. 809 is only installed on single phase models. Part No. 8- Three phase motors are equipped with a Power Cable and a Thermal Protection Cable. Part No. 95 is installed only for three phase models. Material 04 SS 04 SS 04 SS 04 SS 04 SS Plastic Rubber (NBR) Rubber (NBR) Nylon ASTM, AISI Code AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 No. for Unit (80) 7-05 (80) 7-97 (fax) rev. 0/

22 DWFU, DWFAU, DWXFU, DWXFAU Dominator Sectional View Model DWFU, DWXFU Manual Type Model DWFAU, DWXFAU Automatic Type Three Phase Motor DWFU, DWFAU Single Phase Motor DWXFU, DWXFAU Part No Remarks: Part Name Casing Casing Cover Disk Seal Support Impeller Key Float Switch Stay Casing Ring Mechanical Seal O-ring O-ring O-ring Gasket Impeller Bolt Nut Washer Washer Washer Material 04 SS 04 SS 04 SS 04 SS 04 SS 04 SS Viton Viton Viton Viton Viton 04 SS 04 SS 04 SS 04 SS 04 SS ASTM, AISI Code AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 No. for Unit Set 4 4 Part No Part Name Lifting Hanger Float Switch Rotor Stator Capacitor Submersible Cable Sensor Cable Motor Frame Bracket Bracket Shaft Motor Protector Bracket Motor Protector Ball Bearing Ball Bearing Cable Connector Cable Connector External Terminal Capacitor Holder Recommended spare parts. Part No. 095, 6, 86- are only installed on automatic operation models. Part No. 07 is only installed on model DW/DWA/DWF/DWFA single channel impeller. Part No. 809 is only installed on single phase models. Part No. 8- Three phase motors are equipped with a Power Cable and a Thermal Protection Cable. Part No. 95 is only installed on three phase models. Material 04 SS 04 SS 04 SS 04 SS 04 SS Plastic Rubber (NBR) Rubber (NBR) Nylon ASTM, AISI Code AISI 04 AISI 04 AISI 04 AISI 04 AISI 04 No. for Unit (80) 7-05 (80) 7-97 (fax) rev. 0/

23 DWU, DWFU Dominator Motor Specification Model DWU, DWAU, DWFU, DWFAU Output HP kw Phase Voltage V Rating Current A Speed R.P.M. Locked Rotor Current A Insula tion Class Overload Protection Type No. of Cond Power Cable mm AWG Length Ft Performance Data at Rating Point Efficiency % Power Factor % Resistance at 0 C Ohms * Symbols / # /. Single Built-In Auto Cut.0.5 #4 # # / F SOOW /. Three Thermal Sensor 4.5 # Thermal Protection Cable SOOW # (80) 7-05 (80) 7-97 (fax) rev. 0/

24 DWXU, DWXFU Dominator Motor Specification Model DWXU, DWXAU, DWXFU, DWXFAU Output HP kw Phase Voltage V Rating Current A Speed R.P.M. Locked Rotor Current A Insula tion Class Overload Protection Type No. of Cond Power Cable mm AWG Length Ft Performance Data at Rating Point Efficiency % Power Factor % Resistance at 0 C Ohms * Symbols / # /. Single Built-In Auto Cut.0.5 #4 # # / F SOOW /. Three Thermal Sensor 4.5 # Thermal Protection Cable SOOW # (80) 7-05 (80) 7-97 (fax) rev. 0/

25 DWU, DWFU, DWXU, DWXFU Dominator Motor Wiring Diagram DWU, DWFU, DWXU, DWXFU Manual Operation Type (Single Phase) Output / to HP (kw to kw) 5V Output / to HP (kw to kw) 0V Output /HP (.kw) 0V Output HP (.5kw) 0V - (80) 7-05 (80) 7-97 (fax) rev. 09/08

26 DWU, DWFU, DWXU, DWXFU Dominator Motor Wiring Diagram DWU, DWFU, DWXU, DWXFU Manual Operation Type (Three Phase) 0V 460V -5 (80) 7-05 (80) 7-97 (fax) rev. 09/08

27 DWAU, DWFAU, DWXAU, DWXFAU Dominator Motor Wiring Diagram DWAU, DWFAU, DWXAU, DWXFAU Automatic Operation Type (Single Phase) Output / to HP (kw to kw) 5V 0V Output /HP (.kw) 0V -5 (80) 7-05 (80) 7-97 (fax) rev. 09/08

28 DWU, DWFU Dominator Electrical Data Model DW(A)U, DWF(A)U DWX(A)U, DWXF(A)U / to HP, 60Hz, Single Phase, 5V Item No. Output (HP) / Name- Plate Rating Phase Poles Volts Amperes Speed 75 Insulation Class F F Capacitor µ F Start Run No Load Amperes.6.90 Test Watts Resistance at Main Coil C OHMS Aux. Coil.97.8 Current Amp % Efficiency % Load Power Factor % Speed RPM Locked Rotor Torque % Locked Rotor Current Amp Number Starts Per Hour 0 0 Voltage Tolerance % ±5 Frequency Tolerance % ±5 (Ref. data Mfr. s Symbols) -5 (80) 7-05 (80) 7-97 (fax) rev. 09/08

29 DWU, DWFU Dominator Electrical Data Model DW(A)U, DWF(A)U DWX(A)U, DWXF(A)U / to HP, 60Hz, Single Phase, 0V Item No. Output (HP) / / * Name- Plate Rating Phase Poles Volts Amperes Speed Insulation Class F F F F Capacitor µ F Start Run No Load Amperes Test Watts Resistance at Main Coil C OHMS Aux. Coil Current Amp % Efficiency % Load Power Factor % Speed RPM Locked Rotor Torque % Locked Rotor Current Amp Number Starts Per Hour Voltage Tolerance % ±5 Frequency Tolerance % ±5 (Ref. data Mfr s Symbols) *Note: hp not available in automatic operation (80) 7-05 (80) 7-97 (fax) rev. 09/08

30 DWU, DWFU Dominator Electrical Data Model DWXU, DWXFU / to HP, 60Hz, Three Phase, 0V Item No. Output (HP) / / Name- Plate Rating Phase Poles Volts Amperes Speed Insulation Class F F F F F Capacitor µ F Start Run No Load Amperes Test Watts Resistance at Coil C OHMS Current Amp % Efficiency % Load Power Factor % Speed RPM Locked Rotor Torque % Locked Rotor Current Amp Number Starts Per Hour Voltage Tolerance % ±5 Frequency Tolerance % ±5 (Ref. data Mfr s Symbols) (80) 7-05 (80) 7-97 (fax) rev. 0/

31 DWU, DWFU Dominator Electrical Data Model DWXU, DWXFU / to HP, 60Hz, Three Phase, 460V Item No. Output (HP) / / Name- Plate Rating Phase Poles Volts Amperes Speed Insulation Class F F F F F Capacitor µ F Start Run No Load Amperes Test Watts Resistance at Coil C OHMS Current Amp % Efficiency % Load Power Factor % Speed RPM Locked Rotor Torque % Locked Rotor Current Amp Number Starts Per Hour Voltage Tolerance % ±5 Frequency Tolerance % ±5 (Ref. data Mfr. s Symbols) (80) 7-05 (80) 7-97 (fax) rev. 09/08

32 Technical Information Mechanical Sectional View Since the mechanical seal is the most critical part of submersible pumps, EBARA provides the most reliable mechanical seal available for submersible pumps. DOUBLE MECHANICAL SEALS with SUPER-HARD seal face are provided on all EBARA Dominator submersible pumps. The double mechanical seal in oil chamber provides long life and friction-free sealing of the motor shaft. Typical construction and materials are as follows: Mechanical Seal Type: Motor side material: Impeller side material: MG9-D/5-G54 Ceramic/Carbon/NBR SiC/SiC/FPM Lubricating Oil: Type: ESSO MARCOL 5 No Part Name Rubber seat Stationary ring Rotary ring Rotary seal Coil Spring Rotary seal Rotary ring Stationary ring Rubber seat Material NBR Ceramic Graphite Rubber NBR AISI 04 stainless steel Rubber FPM Silicon carbide Silicon carbide FPM (80) 7-05 (80) 7-97 (fax) rev. 09/08

33 Technical Information Details of Cable Entry Based on their years of experience, EBARA now provides the most dependable cable entry construction of any submersible pump. Its features are as follows: 5 4 Part No. Part Name Material ASTM, AISI Code Remarks Cable Connector Rubber (NBR) Flange 04SS AISI 04 Cap Nut 04SS AISI 04 Size: M5 4 Cable Stopper Steel A8 Grade D 5 Submersible Cable for Float Switch SOW-A H05RN-F (80) 7-05 (80) 7-97 (fax) rev. 09/08

34 Technical Information Mechanical Seal and Ball Bearing Output Mechanical Seal Lubricating Oil Ball Bearing Model HP kw Type Capacity Ozs CC Name Bottom Top DWU-DWFU / MG9-D/5-G White Mineral Oil 60 ZZ 60 ZZ DWXU-DWXFU MG9-D/5-G Esso Marcol 5 60 ZZ 60 ZZ /. MG9-D/5-G ZZ 60 ZZ.5 MG9-D/5-G ZZ 60 ZZ. MG9-D/5-G ZZ 60 ZZ Capacitor L ød - sq mm Outer case/polypropylene Phase Output kw HP Voltage (V) Capacity (µf) Specification Rated Voltage (V) Max. Temp. ( F) Dimension D L Remarks / /6 9 /6 7 /8 7 / /6 7 /8 Single /6 7 /6 /6 /6 Use pcs.. / /6 / /6 7 /6 7 /8 / (80) 7-05 (80) 7-97 (fax) rev. 09/08

35 Technical Information Maximum Submergence of Pumps EBARA submersible pumps shall be capable of continuous submergence underwater without loss of watertight integrity to the following depths: Model DWU DWFU DWXU DWXFU DWAU DWFAU DWXAU DWXFAU Operation Manual Operation Automatic Operation (A) Maximum Submergence ft. ft (80) 7-05 (80) 7-97 (fax) rev. 09/08