Dimensions and Weights
|
|
|
- Abigail Cunningham
- 5 years ago
- Views:
Transcription
1 Sizing & Selection 2 Dimensions and Weights This section provides typical dimensions for Valtek's basic line of control valves. This dimensional information is for estimating only and is not certified since designs may be improved over time, thus causing changes in dimensions. For certified dimensional drawings, contact factory. ll dimensions are in inches / mm. L J (Lifting ring available on sizes 25 and 50 only) K N M M G G G MT MT MT MT Standard ylinder ctuator 0083 With Top-mounted ontinuously onnected andwheel With Push-only andwheel ody Size G* J K** L** M*** N ylinder (inches) Spud Top-mounted Size Diameter andwheel (sq.in.) lass lass (inches) Std. ont. Push onn. Only 25 /2 to 2 /2 to /2 to 2 /2 to to 4, /2 to (lass 50) 3 to 4, /2 to (lass 50) 6 to 8, 00 0 to 2 3 to (lass 50) 0 to 4 6 and larger to 4, /2 to (lass 50) to 8, 0 to 2 3 to (lass 50) 0 to 4 6 and larger and larger 6 and larger **** **** and larger 6 and larger **** **** and larger 6 and larger *** *** **** **** and larger 6 and larger *** *** **** **** * 00 sq. in. and larger, 4-inch maximum stroke. onsult factory. ** For eta I/P positioner add 2.0 inches (52 mm) to "L" dimension, and.8 inches (45 mm) to "K" dimension. Rev. 0/94 *** Standard size shown. andwheel diameter subject to change per torque requirements. **** onsult factory. 2-
2 Linear ctuator Dimensions M (Lifting ring available on size 25 and 50 only) N G OPN NU R K 0084 MT Side-mounted ontinuously onnected andwheel* With Size 25, 50, 00 and 200 (inches / mm) ylinder ody Size (inches) Spud Operator Size lass lass Diameter Size G* K** M N R (inches) 25 /2 to 2 /2 to /2 to 2 /2 to to 4, /2 to (lass 50) 3 to 4, /2 to (lass 50) 4, / (lass 50) 6 to 8, 00 0 to 2 3 and / (lass 50) 0 to 4 6 and larger / , / (lass 50) 6 to 8, to 2 3 and / (lass 50) 0 to 4 6 and larger / * 00 sq. in. and larger 4-inch maximum stroke, use top-mounted continuously connected handwheel ** For eta I/P Positioner add.8 inches (45 mm) to dimension 2-2
3 Manual andwheel and Trooper Dimensions M Manual andwheel (inches / mm) G MT 004 O S andwheel ody Size (inches) Spud Size Type lass 50 thru 600 (inches) G M /2 thru , 4, 2.62/ (lass 50 ) , (lass 50 ) D 6 (lass 300, 600), , 0, 2 (lass 50) J F F** Trooper (inches / mm) ody * F** J Size lass ctuator Size ctuator Size (in.) I/P I/P 48/38 49/ / * Per NSI/IS S75.03, 985; NSI/IS S75.2, 987. Socketweld and NPT end connections are available on thru 2-inch valves with equivalent face-to-face dimensions. ** With top-mounted handwheel add 3.6 in. (9mm) to actuators sizes 48, 38, 38I/P; add 4.9 in. (24 mm) to actuator sizes 49, 39, 39I/P. 2-3
4 Mark One Dimensions MT MT 0086 lass 50, 300, 600 (inches / mm) ody Size (inches) NSI/Globe* NSI/IS** lass lass lass lass Standard xtended 50, 300, onnet onnet Disassembly learance bove ctuator /2 & 3 / / * Valtek standard per NSI/IS S75.20, 992 ** Per NSI/IS S75.03, 985 For screwed end use 8.3 inch (20 mm) ody Size (in.) lass 900, 500, 2500 (inches / mm) Face-to-Face* Standard onnet xtended onnet Disassembly learance bove ctuator lass lass lass lass lass lass lass lass lass lass 900, , , , / * NSI/IS S75.5, 987; () Per NSI/IS S75.6, 987; (2) Valtek standard 2-4
5 Mark One Dimensions MT old ox xtended onnet (inches / mm) ody ody Size Rating (inches) lass Standard old ox xtended /2 to 50 thru /2 50 thru thru thru thru ngle ody (inches / mm) ody ody Size Rating Standard xtended (inches) lass onnet onnet Disassembly learance bove ctuator /2 to 50 thru /2 50 thru thru thru thru thru thru MT /2 to 900, /2 900, , , , , , ,
6 Mark One Dimensions MT 0088 D Three-way ody (inches / mm) D ody NSI/ NSI/IS Size Globe (in.) lass lass lass lass Std. xt. 50,300, onnet onnet /2 & 3 / / * Per NSI 6.0, 986 ** Per NSI/IS S75.03, 985 For screwed end use 8.3 inch (20 mm) Disassembly learance bove ctuator 2-6
7 Guardian Dimensions MT 0089 Table V: Dimensions (inches / mm) ellows NSI NSI/IS ody Rating (in.) (psi) lass 50, lass lass lass 300, Disassembly learance bove ctuator /2-3 / /2-3 / / /
8 Guardian II Dimensions MT 0090 Valve Disassembly ody NSI NSI/IS learance Size lass 50, lass lass lass bove (inches) 300, ctuator 2, 3 4, ** 69** ** 738** ** For 2.88 inch spud diameter subtract 0.6 inch (6 mm) Guardian II Dimensions (inches / mm) 2-8
9 Mark One-X Dimensions O S MT 009 ody (inches) Mark One-X Dimensions (inches / mm) NSI/Globe* NSI/IS** lass 300, 600 lass 300 lass x x 3 N/ x 4 N/ x 4 N/ x 6 N/ x 4 N/ x 6 N/ x 6 N/ x 8 N/ * Per NSI ** Per NSI/IS S
10 Mark ight Dimensions J * F G O S Size ctuator (in.) Size lass 50 Dimensions (inches / mm) F G J / / Size ctuator (in.) Size lass 300/600 Dimensions (inches / mm) F G J / /
11 Mark ight Dimensions J * F G O S Size ctuator (in.) Size lass 900/500 Dimensions (inches / mm) F G J / / Size ctuator (in.) Size lass 2500 Dimensions (inches / mm) F G J / / /
12 Mark Six Dimensions xtension Length xtension Length 003 D 0094 lass 50, 300 and 600 (inches / mm) ody Size (inches) NSI D Globe NSI/IS lass lass lass lass lass lass Disassembly learance bove ctuator / onnet xtension Lengths (inches / mm) ody Size xtension Lengths (inches) /
13 hannelstream, MegaStream, Tiger-Tooth, ngle ody Dimensions K J DISSSMLY LRN F 0095 Table VI: Fabricated ngle ody Dimensions (inches / mm) Valve Size lass * F* J* K* NOT: Various inlet sizes are available for fabricated angle body valves. ontact factory for specific sizes required. *Size 00 ylinder assumed. 2-3
14 Tek-heck Dimensions DISSSMLY LRN DISSSMLY LRN FF F 0096 F FF ody Size lass lass lass lass lass lass lass lass lass lass lass lass lass 900, , , , , *Standard *Standard / Mark Two Mark Two Dimensions Dimensions * vailable in standard Mark Two body only. lass 50, 300 and 600 (inches / mm) F FF ody NSI Globe NSI / IS Size lass lass lass lass lass lass 50,300, ,600 /2, 3 / / lass 900, 500, 2500 (inches / mm) 2-4
15 MegaStream Diffuser Dimensions Size Max D Series 2 Maximum Weight (in.) V Diameter to fit inside flange bore Type GDS D Type GDI Size Max D Series 2 Maximum Weight (in.) 3 V D Type GDV Size Max 4 Series 2 Maximum Weight (in.) V Notes: ll dimensions are in inches/mm and weights are in lbs/kg and are for estimations only. () ctual diffuser diameter. (2) Series designates pressure rating of diffuser identical to pressure rating of same class flange. (3) Typical diameter. Pressure rating of head equal to schedule 40 pipe of same diameter. Diffuser rating per note 2. = 2D. (4) Typical diameter. ctual diameter established so that exit velocity < 400 ft./sec. See MegaStream control valve bulletin for one and two-stage MegaStream valve dimensions. ontact factory for Tiger-Tooth attenuator and in-line silencer dimensions. 2-5
16 MegaStream Plate Dimensions 006 MegaStream Plate Dimensions (inches / mm) Size (in.) Stage 2 Stage 3 Stage /
17 Rotary ctuator Dimensions J DISSSMLY LRN F O S S G S K FF SUT OPN P M O S S N R 0097 Rotary ctuator Dimensions (inches / mm) Size * F FF G J K M N P R S** Press. (in.) (act) onn /4 NPT /4 NPT N/ N/ /4 NPT N/ N/ /4 NPT *7.8 inches (98 mm) on size 00 and 200 actuators, 6-inch and larger valves. **7.9 inches (202 mm) on size 50 actuators and 8, 0-inch valves; 9.4 inches (238 mm) on size 00, 200 actuators and 8,0,2-inch valves;.3 inches (286 mm) on size 00, 200 actuators and 6-inch and larger valves. NOT: Size 00 and 200 actuators do not include lifting rings. 2-7
18 Valdisk Dimensions J DISSSMLY LRN F S (Seat Dia.) T (Dia.) G O S S D K 0098 DISSSMLY LRN Table VII: Valdisk Dimensions (inches / mm) ody lasses 50, 300, thru 8-inch; 50, thru 2-inch (with lass 50 or 300 disc and shaft) ctuator Size Size Shaft * D F G J K S T (in.) (sq.in.) Size * Face-to-face, MSS SP67 ody Only 2-8
19 Valdisk 50 Dimensions DISSSMLY LRN J F G O S S DISSSMLY LRN D K 0099 Size ctuator Size Shaft * D F G J K (in.) (sq.in.) Size * Face-to-face, MSS SP67 ody Only Table VI: Valdisk 50 Dimensions (inches / mm) 2-9
20 MaxFlo Dimensions DISSSMLY LRN J F G O S S K D 0008 DISSSMLY LRN Table V: MaxFlo Dimensions (inches / mm) Valve ctuator Shaft Size Size Size D F G J K (in.) (sq.in.) /
21 ShearStream Dimensions DISSSMLY LRN J F G O S S D DISSSMLY LRN K 000 Table V: ShearStream Dimensions (inches / mm) ody lasses 50, 300, and 600 ctuator Size Size Shaft (in.) (sq.in.) Size D F G J K* /
22 stimated Shipping Weights Note: ll shipping weights are in pounds / kilograms and include cylinder actuators and positioner. Special trim, accessories, actuator handwheels and reducers may affect the weight. Weight in Pounds / Kilograms dd for Size lass lass lass lass lass lass xtended (inches) onnet /2-3 /4 Mark One Globe (lbs / kg) / Size NSI lass dd for xtended onnet /2-3 / / ody Size (in.) Mark Two (lbs / kg) Mark ight (lbs / kg) Rating lass lass lass lass dd for xtended onnet / Mark Six (lbs / kg) Size NSI lass (inches) / Trooper (lbs / kg) Valve Size Weight (inches) lass 50 lass / * dd: lbs / 0.45 kg for P/P positioner; 3 lbs /.4 kg for I/P positioner. Tek-heck (lbs / kg) ody Rating Size lass lass lass lass lass lass (in.) /2-3 / / Oversize ctuator Weights (lbs / kg) Original Size Oversize dd
23 Valdisk (lbs / kg) Valve Size Weight Valve Size Weight ShearStream (lbs / kg) Valve Size (inches) Weight (lbs / kg), /2, Valdisk 50 (lbs / kg) MaxFlo (lbs / kg) Valve Size Wafer ody Lug ody Valve Size Flangeless ody Flanged ody /
24 2-24
Models And Specifications
Sizing & Selection 2 Models And Specifications Mark One Globe Valve The Mark One is designed for most gas and liquid applications. The valve s unique construction handles pressures from vacuum to 15,000
Valtek MaxFlo Control Valves
Control Valves Control Valves Rangeability up to 160:1 Hardened Eccentric rotary plug lifts off seat immediately, reducing seat wear Non-crossover shaft provides greater C V Heavy duty ridge metal seat
Valtek Valdisk 150. Valtek Valdisk 150. Control Valves. Flowserve Corporation, Valtek Control Products, Tel. USA
Control Valves Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611 1 Control Valves Available in wafer or lug-style body Self-centering seat Blowout protection increases safety Compact,
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
Valtek Valdisk 150. Valtek Valdisk 150. Control Valves
Valtek Valdisk 50 Control Valves Contol Valves Compact, field reversible actuator Self-centering seat Blowout protection increases safety Available in wafer or lug-style body Blind end also eliminates
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
Model ZW204 Non-Modulating Float Valve
Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the
GTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300
GTW ONTROL VLVE PPLITION DT Process control systems for food, pulp and paper, chemical, petrochemical & other industries HV systems Feed water and fuel system controls in boiler rooms Packaged systems
VB-7000 Series 1/2 to 2 Globe Valves
V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe
Butterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple
Valtek Control Products And Services
Valtek Control Products And Services 1 Valtek Control Products and Services Reliability, long life, parts interchangeability, ease of maintenance, prompt delivery and a fair price Valtek control products
Unbalanced and Pressure-balanced Trim
Sizing & Selection 8 Unbalanced and Pressure-balanced Trim Unbalanced Trim Types Valtek offers three unbalanced trim designs: 1) standard full area trim which provides maximum C v with a removable seat
Valtek Valdisk. Valtek Valdisk Control Valves
Control Valves 1 Control Valves Compact, field reversible actuator Jam-lever Toggle soft seal ANSI Class IV shutoff metal seal ANSI Class VI shutoff soft seal Non-selective disc and shaft for reduced cost
Vic -300 Butterfly Valves
R IPS RON STL PIP ROOV VLVS 08.0 Vic -300 utterfly Valves PROUT SRIPTION ear Operator 3" with Position andle Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 PSI (065 kpa).
VG2000 Series Cast Iron Flanged Globe Valves
Installation Instructions VG2000 Issue ate November 15, 2002 VG2000 Series ast Iron Flanged Globe Valves pplication VG2000 Series ast Iron Flanged Globe Valves are primarily designed to regulate the flow
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
Medium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
Butterfly Control Valve
Butterfly Control Valve Control Valves Compact, field reversible actuator Splined shaft with single pivot point for actuator-disc connection Jam-lever Toggle soft seal Non-selective disc and shaft for
MaxFlo 3 Control Valves
MaxFlo 3 Control Valves Figure 1: MaxFlo 3 Control Valve with Valtek High-Performance Diaphragm Actuator and Logix 500 Digital Positioner (HART compatable) Figure 2: Safe, Reliable, Anti-Blowout Shaft
MK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
G7150D, 3-Way, Diverting Flanged Globe Valve
G7150D, 3-ay, Diverting Flanged Globe Valve pplication This valve is typically used in Large ir Handling Units on heating or cooling coils. This valve is suitable for use in a hydronic system with variable
IFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
MILLCENTRIC B ALANCING PLUG VALVE
ISO 9001 ertified MILLNTI LNING PLUG VLV alancing Service egulation of multi-circuit chilled water and hot water systems is essential to achieve design performance. MILLNTI valves have excellent throttling
Two port valves. pneumatically actuated
Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use
DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions
Valtek ShearStream Control Valves
Control Valves Control Valves Compact, field-reversible actuator Lightweight, rugged one-piece body Splined ball-toshaft connection Bi-directional Flex-loc TM seal* ANSI Class IV shutoff metal seal ANSI
Model SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
Electronic Butterfly Valve Guide Specifications (For temperatures ranging from 30 F to 250 F)
Electronic Butterfly Valve Guide Specifications (For temperatures ranging from 30 F to 250 F) : 2 through 12 are 200 PSI butterfly valves meeting MSS SP-67 and PI-609 specifications. 14 through 24 are
Stainless steel butterfly valves Index
Index General information Product information utterfly valves, hand-actuated utt weld connections DIN - Inch - ISO dimensions 377 Other connections Various connection combinations 378 utterfly valves,
G6125C, 2-Way, Pressure Compensated Flanged Globe Valve
G6125, 2-ay, Pressure ompensated langed Globe Valve pplication This valve is typically used in large air handling units on heating or cooling coils. This valve is suitable for use in a hydronic system
Handwheels, Limit Stops and Lever Operators
Sizing & Selection 18 Handwheels, Limit Stops and Lever Operators LINEAR ACTUATOR HANDWHEELS Valtek linear actuators are available with two types of handwheel designs: the continuously connected handwheel
Parker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
0 12,000 psi & psi DYNAFLOW Pneumatically Operated Patented Shutoff Valves. Technical Data. Body Construction Materials
MV/S 12 & 60 Series 0 12,000 psi & 0 6000 psi YNFLOW Pneumatically Operated Patented Shutoff Valves Features Zero leakage Three operating modes i-directional Positive spindle retention xtended stem for
BOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
MT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
Combination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
Butterfly Valves. Applications. Pressures To 200 PSIG Temperatures to 300 F BUTTERFLY VALVES FEATURES MATERIALS OF CONSTRUCTION SEAT MATERIALS
pplications Process Industry Pulp and Paper Power Industry Metals and Mining Chemical Industry Water and Waste Oil and Gas utterfly Valves Pressures To 200 PSIG Temperatures to 300 F FETURES Positive Shutoff
Series 709 Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers
Specifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
DBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
Valtek Tek-Check Control Valves Valtek Tek-Check
Valtek Tek-Check Control Valves Non-Slam Piston Type Easy disassembly: Removal of bolting, bonnet flange and bonnet provides easy access to piston Interchangeability: Single body used for Class 50, 300
Electronic Globe Valve Guide Specifications
Electronic Globe Valve Guide Specifications Two and Three-Way Screwed Valves Valves 1/2" through 2" shall be bronze body, NPT screw type, and shall be rated for NSI Class 250 working pressure. The operating
DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS
BULLETIN 46.00-4 MARCH 2015 DeZURIK BOS-CL ON-CENTER, RESILIENT SEATED BUTTERFLY VALVE TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A536, 65-45-12
Selection Guide. Vx-7000 & Vx-9000 Series Mx4x-6xxx & Mx4x-7xxx Series. Globe Valve Assemblies. Actuator/Linkage Assemblies
Vx-7000 & Vx-9000 Series Mxx-6xxx & Mxx-7xxx Series Selection Guide Linked Globe Valve ssemblies ctuator/linkage ssemblies with DuraDrive ctuators Globe Valve ssemblies The V, VF, and VS-7000 and -9000
3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
Vic -300 Butterfly Valves
R IPS RON STL PIP GROOV VLVS Vic -300 utterfly Valves 08.02 VITULI IS N ISO 9001 RTII OMPNY PROUT SRIPTION Vic -300 butterfly valves are designed for pressures ranging from vacuum to 300 psi (2065 kpa).
PNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
Cast Steel Tilting Disc Check Valve
ast Steel Tilting heck Valve Typical Tilting heck Valve Tilting heck Valves consist of a cylindrical housing, with a pivoted circular disc. The pivots are located just above the center of the disc, and
INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance
globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe
TECHNICAL DATASHEET DUO-CHEK High Performance Non-Slam Check Valves
brands you trust. TEHNIL DTSHEET DUO-HEK High Performance Non-Slam heck Valves Retainerless heck Valves Style H High Performance heck Valve for ritical pplications For critical applications, Duo-hek Retainerless
Titan Flow Control, Inc. Your pipeline to the future!
Titan Flow ontrol, Inc. Your pipele to the future! Series F 75 Wafer > ast Iron Series F 76 ug > uctile Iron esigned accordance with: MSS-S-67 & I 609 olor oded: Orange ody is M Seat lue ody is una-n Seat
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators. Features
Mark 95 Series Sanitary ack Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited for virtually any sterile
Flowline Products and Services World Proven Chiksan and Weco Equipment.
lowline Products and Services World Proven hiksan and Weco quipment http://www.fmctechnologies.com Weco utterfly Valves and hoice of operators, actuators ll Weco butterfly valve models can be equipped
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
Resilient Seated COMMERCIAL. Butterfly Valves 2 Way Way /10/16 COMMERCIAL
Bray s NY and B series resilient seated butterfly valves set the design standard for quality, reliability and long life in a wide variety of HV applications. Specifically designed for automated applications
Right Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
ACV Series. Rotary Electric Actuator Series. MV 60 Series. Positive Inline Choke
HOKE VLVES Since the Merla brand was first registered in 1937, products by the Merla Tool ompany were rugged, reliable, and manufactured to the highest quality standards possible. Merla valves (commonly
Valtek Tek-Check. Check Valves
Valtek Tek-Check Check Valves Non-Slam Piston Type Easy disassembly: Removal of bolting, bonnet flange and bonnet provides easy access to piston Interchangeability: Single body used for Class 150, 300
MaxFlo 3 Excentric Rotary Plug Valve
MaxFlo 3 Excentric Rotary Plug Valve Figure 1: MaxFlo 3 Control Valve with Valtek High- Performance Diaphragm Actuator and Logix 500 Digital Positioner Figure 2: Safe, Reliable, Anti-Blowout Shaft System
Flowserve Spring Diaphragm Rotary Actuators
Flow Control Division Installation, Operation, Maintenance Instructions Flowserve Spring Diaphragm Rotary Actuators TERMS CONCERNING SAFETY The safety terms DANGER, WARNING, CAUTION and NOTE are used in
Mark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage
Mark 75 Series Wafer Style Control Valves The Mark 75 wafer style control valve was developed by Jordan Valve as the next generation of control valves. Featuring all the benefits of the time-tested Sliding
Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
RS Series. Three way rotary valves for temperature control systems
RS Series Three way rotary valves for temperature control systems R S RS Three way rotary valve for temperature control systems RS 3-way rotary valve for temperature control systems High Efficiency Mixing
Polypropylene Lug and Wafer Style Butterfly Valve FEATURES MATERIALS OF CONSTRUCTION
180089903 Series Polypropylene Lug and Wafer Style utterfly Valve Lug Style Valve Installs between flanges. olts are threaded into tapped holes from each side of mounting flange. Valve Pressure / Temperature
Model G6-S3. Repeatability ±0.02%
Issue/Rev. 0.6 (2/07) Smith Meter TM PD Rotary Vane Meter 6" Steel Model G6 Specifications Bulletin SS01014 The Smith Meter TM Model G6 Meter is a 6", double-case, straight-through (S3 through S8) or angle-type
Bellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
Butterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
Designed for blow-off service in boiler systems with pressures of 3,206 psig.
Designed for blow-off service in boiler systems with pressures of 3,6 psig. General Description asic requirements for the design and use of blow-off valves are established by the SM Power oiler Code, Section
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PW Series igh Performance Wafer Style utterfly Valve The PW is a high performance wafer style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range
FEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
Baumann Corrosion Resistant Control Valve
Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and
Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
σ Attenuation Notes 1.5 σ dba 1.2 σ 1.5 σ σ 1.5 σ 1.002
INDEX: SEVERE SERVICE SOLUTIONS Section Product Liquid Gas Dirty Service σ Attenuation Notes 14-01 LOW COST OPTIONS x x Lowest 1.5 σ 2.0 15 dba These options should be considered prior to implementing
Series 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION
PL Series igh Performance Lug Style utterfly Valve The PL is a high performance lug style butterfly valve that can be equipped with a manual handle or with pneumatic or electric actuators. full range of
Paramax Series Control Ball Valve. Specification Data CM6004 7/97
Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................
Series 706 Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers
Series W709 AGS Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)
Three Way Control Valves
No. SS2-MT100-0100 Three Way Control Valves Model MT OVERVIEW The valve model MT is a three-way control valve for diverting and mixing service. The actuator employed is of a multispring type and has a
Three Way Control Valves
No. SS2-HDT110-0100 Three Way Control Valves Model HDT OVERVIEW The valve model HDT is a three-way control valve for diverting service. It has a small-sized, high-output diaphragm motor which is suitable
Suction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
Series PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.
OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,
Fisher 9500 Butterfly Control Valve
9500 Product Bulletin Fisher 9500 Butterfly Control The Fisher 9500 butterfly valve is a fully lined valve for use with corrosive fluids and where tight shutoff is required. The nitrile or PTFE liner totally
Type 8560 Eccentric Disk Butterfly Control Valve
Product Bulletin 8560 Valve Type 8560 Eccentric Disk Butterfly Control Valve The Type 8560 high-performance valve (figures 1 and 2) features a stainless steel disk with a soft or stainless steel seal ring.
SELECTION. Easily Selectable Easily Serviceable. Interchangeability as easy as 1-2-3
SELETION Terminal Unit Zone Valve 1 Select your valve body Female Thread Solder ouble Union 2 Select your cartridge type hoice of V Hot and hilled Water 50% Glycol Low Pressure Steam Pressure alanced Male
VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves
Product ulletin VG000 Issue ate 11/01/01 VG000 Series High-apacity/High-loseoff Electric Zone Valves VG000 Series High-apacity/High-loseoff Electric Zone Valves are designed to regulate the flow of water
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
Hydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
Series W706 AGS Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Biffi Morin HP Series actuator
HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits
Valves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110