Three Way Control Valves
|
|
- Amber Walker
- 5 years ago
- Views:
Transcription
1 No. SS2-MT Three Way Control Valves Model MT OVERVIEW The valve model MT is a three-way control valve for diverting and mixing service. The actuator employed is of a multispring type and has a small-sized, high-output diaphragm motor with an extremely simplified operating mechanism. It is used for the heat control of heat converters, etc. SPECIFICTIONS Model: MT (Mixing service three-way valve) ody Type Three-way cast globe valve Nominal size 1, 1½, 2, 2½, 3, 4, 5, 6 inches Pressure rating JIS 10K, 20K, 30K NSI Class 150, 300 JPI Class 150, 300 End connection: Flanged end Connection type Pressure rating pplicable standard JIS10K JIS FF NSI Class 150 NSI JPI Class 150 JPI-7S JIS10K, 20K, 30K JIS RF NSI Class 150, 300 NSI JPI Class 150, 300 JPI-7S Material SCPH2, SCS13, SCS14 For body/trim material combinations and operating temperature ranges, refer to Table 1. onnet Plain bonnet (-17 to +230 C) Extension bonnet (+230 to +350 C) Note)Take care not to exceed the operating temperature ranges specified for respective materials. Gland type olted gland Packing / grease Grease not provided; When V shaped PTFE packing or PTFE yarn packing is used. Grease provided; When graphite, or graphite packing is used. Note) PTFE: Polytetrafuloroethylene. Gasket Type; serrated type Material; SUS316, SUS316 (PTFE) Trim Valve plug Three-way, V-port with linear characteristics (LV) Material: SUS316 (SCS14), SUS316L (SCS16) SUS316 (SCS14) stellite, SUS316L (SCS16) stellite Note) 1) Parenthesized codes denote symbol displays of valve plug. 2) For fluid conditions requiring stellite, refer to Figure 1. ctuator Type: Single acting diaphragm actuator (Type PS1, H) ction: Direct or reverse action Diaphragm: Cloth embedded ethylene propylene rubber Spring range: {0.2 to 1.0 kgf/cm²} {0.8 to 2.4 kgf/cm²} - 1-4th edition
2 No. SS2-MT Supply pressure: 120 to {1.2 to 3.5 kgf/cm²} Note) Spring range varies depending on allowable differential pressure and air supply pressure. ir connection: Rc1/4 or 1/4NPT internal thread mbient temperature: -30 to +70 C Valve action ir fail bottom open (Direct action actuator is combined.) ir fail bottom close (Reverse action actuator is combined.) For relations between the valve action and the flow, refer to Table 3. Optional accessories *, pressure regulator with filter, *, limit switch, solenoid valve, motion transmitter, booster relay, lock-up valve, and others. Note) 1) For the optional items, refer to the specification sheets and installation drawings of respective accessories. 2) ccessories with the asterisk mark (*) are selected from among the following types depending on the actuators to be combined. Hand wheel ctuator P/P I/P Top Side PS1 VPE VP/HEP THM SHM H2 to 4 HTP VP/HEP THM SHM dditional specification (by special order) Special inspection characteristics inspection, material inspection (Material certificate), non-destructive inspection. Double gland Oil/water free treatment Copper free treatment Stainless steel (SUS304) atmosphere-exposed nuts and bolts. Special air piping and joints Sand-/dust preventive measure Saline damage countermeasures Cold-proof specifications Tropical proof specifications Vacuum service zbil Corporation Performance Rated Cv value: Refer to Table 2. Inherent rangeability: 30 : 1 llowable differential pressure Refer to Table 4 and Table 5. Leakage specification IEC :2006 or JIS :2008 Metal seat Standard Class IV: Leakage less than 0.01% of maximum valve capacity. Hysteresis error Without positioner: Within 3% F.S. (Within 5% F.S.) With positioner: Within 1% F.S. Linearity Without positioner: Within ± 5% F.S. With positioner: Within ± 1% F.S. (model VPE: ± 3% F.S., model HEP: ± 2% F.S.) Note) 1) When positioner is not provided, operating performance may vary depending on type of packings used. 2) Parenthesized figures are applicable to type PS1. Dimensions Refer to Figure 4 and Table 8. Weight Refer to Table 9. ctuator orientation Refer to Figure 5. Finish lue (Munsell 105/10) or silver, or other specified colors. Table 1 ody / trim material combinations and operating temperature ranges ( C) ody material JIS SCPH2 SCS 13 SCS 14 Trim material STM 216WC 351 CF8 351 CF8M JIS SCS316 (SUS14) -5 to to to 300 JIS SUS316L (SCS16) to to 300 JIS SUS316 Stellite (SCS14 Stellite) -5 to to to 350 JIS SUS316L Stellite (SCS16 Stellite) to to 350 Note) 1) shows standard combination of valve body and trim materials. 2) Parenthesized codes denote symbol displays of valve plug
3 zbil Corporation No. SS2-MT Table 2 Cv value and travel Nominal size (inches) 1 1½ 2 2½ Port size (inches) 3/4 1 1½ 2 2½ Rated Cv value Rated travel (mm) Normal differential pressure {kgf/cm 2 } 1470 {15} 0 {10} 490 {5} Stellite range Fluid temperature ( C) Cv value (%) Characteristics (1) Characteristics (2) Travel (%) Figure 1 Temperature / normal differential pressure ranges requiring stellite Figure 2 characteristics Note) When cavitation, flushing service, oil free treatment service, or retention of valve closing performance is required, stellite is recommended regardless of temperature and differential pressure. Note) This graph indicates ideal flow rate characteristics. Table 3 rate characteristics and flow ody structure service rate characteristics ctuator Valve action MT Mixing Diverting Characteristics (1): Characteristics (2): Characteristics (1): Characteristics (2): Direct action Figure 3. a Reverse action Figure 3. b Direct action Figure 3. c Reverse action Figure 3. d a. Valve with direct-action actuator b. Valve with reverse-action actuator c. Valve with direct-action actuator d. Valve with reverse-action actuator Figure 3 Valve action - 3 -
4 No. SS2-MT zbil Corporation llowable differential pressure PTFE packing Table 4 Mixing service by MT ctuator Supply pressure Spring range Differential pressure [by port size (inches)] 3/4 1 1½ 2 2½ PS1D, R {0.2 to 1.0} Δ 410 {4.2} {0.8 to 2.4} a {29.4} {2.6} 170 {1.7} {18.1} {12.3} 720 {7.3} H2D, R {0.2 to 1.0} Δ 790 {8.1} {0.8 to 2.4} a {40.0} {5.0} 330 {3.4} 200 {2.0} {35.5} {23.5} {14.2} 120 {1.2} 860 {8.8} 90 {0.9} 620 {6.3} 50 {0.5} H3D, R {0.2 to 1.0} Δ 590 {6.0} 350 {3.6} 220 {2.2} {0.8 to 2.4} a {40.0} {25.3} {15.3} 160 {1.6} 1100 {11.2} 90 {0.9} 620 {6.3} 50 {0.5} 390 {4.0} 40 {0.4} 270 {2.8} H4D, R {0.2 to 1.0} Δ 370 {3.8} 260 {2.7} 150 {1.5} {0.8 to 2.4} a 2650 {27.0} {19.4} 1900 {10.9} 1070 {7.0} {0.6} 470 {4.8} Table 5 Diverting service by MT ctuator PS1D, R H2D, R H3D, R H4D, R Supply pressure {kgf/ cm²} Spring range {0.2 to 1.0} Δ 410 {4.2} {0.8 to 2.4} a 820 {8.4} {0.2 to 1.0} Δ 790 {8.1} {0.8 to 2.4} a 1600 {16.3} Differential pressure [by port size (inches)] 3/4 1 1½ 2 2½ {2.6} 510 {5.2} 490 {5.0} 990 {10.1} 170 {1.7} 330 {3.4} 670 {6.8} {0.2 to 1.0} Δ 590 {6.0} {0.8 to 2.4} a 1180 {12.0} 200 {2.1} 200 {2.0} 390 {4.0} 350 {3.6} 710 {7.2} 120 {1.2} 240 {2.5} 220 {2.2} 430 {4.4} {0.2 to 1.0} Δ 370 {3.8} {0.8 to 2.4} a 760 {7.7} 90 {0.9} 180 {1.8} 160 {1.6} 310 {3.2} 260 {2.7} 540 {5.5} 50 {0.5} 90 {0.9} 180 {1.8} 150 {1.5} 300 {33.1} 50 {0.5} 110 {1.1} 200 {2.0} Note) 1) a is necessary Δ: Can be operated either with or without positioner. 2) Table care not to cause the maximum allowable differential pressure to exceed the maximum operating pressure disignated by NSI or JIS {0.4} 80 {0.8} 60 {0.6} 130 {1.3} - 4 -
5 zbil Corporation No. SS2-MT Graphite packing P6610CH+P6528 (+230 to 350 C) Table 6 Mixing service by MT ctuator Supply pressure Spring range Differential pressure [by port size (inches)] 3/4 1 1½ 2 2½ H2D, R {39.9} {27.1} {18.3} {10.9} 660 {6.7} 470 {4.7} 260 {2.6} H3D, R {0.8 to 2.4} a {32.6} {19.4} {12.0} 850 {8.6} 470 {4.7} 300 {3.0} 210 {2.1} H4D, R {21.9} {15.8} 870 {8.8} 540 {5.5} 380 {3.8} Table 7 Diverting service by MT ctuator H2D, R Supply pressure Spring range H3D, R {0.8 to 2.4} a 1060 {10.8} H4D, R Differential pressure [by port size (inches)] 3/4 1 1½ 2 2½ {14.5} 880 {8.9} 600 {6.1} {6.4} 220 {2.2} 390 {3.9} 690 {7.0} 150 {1.5} 280 {2.8} 500 {5.0} 80 {0.8} 150 {1.5} 280 {2.8} {1.7} Note) 1) a is necessary 2) Table care not to cause the maximum allowable differential pressure to exceed the maximum operating pressure disignated by NSI or JIS {0.7} 120 {1.2} - 5 -
6 No. SS2-MT DIMENSIONS Table 8 Face-to-face and external dimensions zbil Corporation [Unit: mm] Nominal size (inches) 1 1½ 2 2½ ctuator E H JIS 10K FF, RF Plain bonnet Extension bonnet JIS 10K FF, RF JIS 20K RF JIS 20K RF Welded Integral Welded Integral φ NSI 150RF JIS 30K RF JIS 30K RF NSI 300RF NSI 150 RF type type type type NSI 300 RF body body body body PS1D, R H2D, R PS1D, R H2D, R H3D, R PS1D, R H2R, R H3D, R H2D, R H3D, R H4D, R H2D, R H3D, R H4D, R H2D, R H3D, R H4D, R H3D, R H4D, R H3D, R H4D, R Table 9 Weight Nominal size (inches) 1 1½ 2 2½ [Unit: kg] FF, RF JIS 10K JIS 16, 20, 30 ctuator mmodel No. NSI 125, 150 JPI 125, 150 NSI 300 JPI 300 Plain Extension Plain Extension bonnet bonnet bonnet bonnet PS1D, R H2D, R PS1D, R H2D, R H3D, R PS1D, R H2D, R H3D, R H2D, R H3D, R H4D, R H2D, R H3D, R H4D, R H2D, R H3D, R H4D, R H3D, R H4D, R H3D, R H4D, R Figure 4 Face-to-face and external dimensions H E - 6 -
7 zbil Corporation No. SS2-MT a. Mixing service by MT No.1 (Standard type) No.2 No.3 No.4 b. Diverting service by MT No.1 (Standard type) No.2 No.3 No.4 Figure 5 ctuator orientation Note) Indicate by position number when installation other than the standard type is required
8 Ordering Information When ordering, please specify; 1) 2) 3) 4) 5) 6) 7) 8) Model Number: MT Nominal size X Port size or Cv required Type and rating of end connections ody and trim material, necessity of hardening Type of bonnet Type of actuator, air to diaphragm Valve action (direct or reverse) ccessories (positioner,, pressure regulator etc.) 9) 10) 11) 12) 13) 14) Special requirement of oil/water or copper free treatment, etc. Name of flow medium Normal flow and maximum required flow Pressure of flow medium, upstream and downstream pressure at maximum required flow Temperature and specific gravity of flow medium Viscosity of flow medium, inclusive or exclusive of slurry Please, read Terms and Conditions from following URL before the order and use. Specifications are subject to change without notice Kawana, Fujisawa Kanagawa Japan (11) 1st edition: June th edition: ug No part of this publication may be reproduced or duplicated without the prior written permission of zbil Corporation.
Three Way Control Valves
No. SS2-HDT110-0100 Three Way Control Valves Model HDT OVERVIEW The valve model HDT is a three-way control valve for diverting service. It has a small-sized, high-output diaphragm motor which is suitable
More informationCeramic Trim Angle Control Valves
No. SS2-8113-2610 Ceramic Trim Angle Control Valves Model HAF OVERVIEW Model HAF ceramic trim angle control valves provide the valve plug and sheet ring employing high performance ceramic with excellent
More informationCV3000 Series Low-Noise Cage type Control Valve Model ACN
No. SS2-ACN110-0100 CV3000 Series Low-Noise Cage type Control Valve Model ACN OVERVIEW The model ACN low-noise cage type control valves are designed to reduce acoustic noise in services of compressible
More informationEccentric Rotary Control Valve (For size 1 to 4 inches)
No. SS2-VFR100-0200 FloWing Eccentric Rotary Control Valve (For size 1 to 4 inches) Model VFR OVERVIEW The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
More informationCV3000 Series Pressure-Balanced Cage type Control Valve
No. SS2-ACP110-0100 OVERVIEW The model ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential
More informationLabyrinth Trim Angle Control Valves
No. SS2-8113-2620 Labyrinth Trim Angle Control Valves Model HAL OVERVIEW Model HAL labyrinth trim angle control valves provide the valve plug with Labyrinth groove to restrict generation of cavitation
More informationCV3000 Series Pressure Balanced Cage type Control Valve
No. SS2-8113-1100 CV3000 Series Pressure Balanced Cage type Control Valve OVERVIEW Model HCB Pressure Balanced Cage Type Control Valves are designed for heavy duty services. The compact valve body, having
More informationEccentric Rotary Control Valve (For size 6 to 12 inches)
No. SS2-VFR100-0100 OVERVIEW FloWing Eccentric Rotary Control Valve (For size 6 to 12 inches) Model VFR The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
More informationCage type Single Seated Control Valves
No. SS-8-00 OVERVIEW Model HSC Cage Type Single Seated Control Valves are designed for high differential pressure heavy-duty service where flashing/cavitation may occur. Further, they are ideal for preventing
More informationCV3000 Series Smart-Port Single Seated Control Valves Model HLC
CV3000 Series Smart-Port Single Seated Control Valves Model HLC OVERVIEW Model HLC Small-Port Cage Guide Type Single Seated Control Valves are designed for high differential pressure Service where fluid
More informationAngle type Control Valves for High Pressure Service
No. SS2-HAH100-0100 Angle type Control Valves for High Pressure Service Model HAH OVERVIEWS The high service angle type control valves (model HAH) are rated at ANSI 2500 and hard alloy is employed to valve
More informationPneumatically-Operated, Single-Seated Control Valve
No. SS-ACT100-0100 OVERVIEW The NEW10-III is a compact, lightweight, and economical simple-function control valve designed for JIS10K process line. It is highly reliable and best suited for process con
More informationHigh Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500)
High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500) Model VDC OVERVIEW Model VDC high pressure service control valve with body rating of ANSI 900, JIS 63K or up provides
More informationTop-Guided Single Seated Control Valves (Rating : ANSI 600 or Less)
No. SS2-8-0 Top-Guided Single Seated Control Valves (Rating : ANSI 0 or Less) OVERVIEW Model VST control valves are suitable for use in fluid with slurry because of its one side guiding construction. Guide
More informationLow leakage Pressure Balanced Cage type Control Valves Model AC2
No. SS2-AC2001-00 Low leakage Pressure Balanced Cage type Control Valves Model AC2 Overview The model AC2 low leakage pressure balanced cage type control valves are designed for heavy duty service. The
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More informationModel HIT. Corrosion-Resistant PTFE Body Control Valves OVERVIEW SPECIFICATIONS. No. SS
No. SS2-8193-0200 Corrosion-Resistant Body Control Valves Model HIT OVERVIEW The Corrosion Resistant Body Control Valves (model HIT) are best suited for handling corrosive fluids such as acids and alkali
More informationCage Guided Globe Control Valves
Product 1: Pressure Balanced Cage type Control Valve Size: 1-1/2'', 2, 2-1/2'', 3'', 4'', 5'', 6'', and 8'' (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN100, JIS10K~JIS40K) OVERVIEW The model
More informationCV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches)
No. SS2-ADV100-0100 CV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches) OVERVIEW Model ADVB / ADVM The CV3000 Alphaplus top and bottom guided double-seat control valves
More informationTop-Guided Single-Seated Control Valves
No. SS-AGV00-000 CV000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 000 Alphaplus range of Top-guided Single-seat Control Valves features a compact valve body
More informationElectric Top-Guided Single-Seated Control Valves
No. SS2-AGV200-0300 CV3000 Alphaplus series Electric Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV3000 Alphaplus range of top-guided single-seat control valves features a compact
More informationTop-Guided Single-Seated Control Valves
No. SS-AGV00-0001 (Rev.11) CV3000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 3000 Alphaplus range of Top-guided Single-seat Control Valves features a compact
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
More informationSingle Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
More informationSTANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES
STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES STANDARD SPECIFICATION BALL VALVE STRAIGHT- THROUGH TYPE 301K SERIES GENERAL The 301K series provides ball valves with a special inner
More informationGVER04 GLOBE VALVE. Fundamental Of Engineering Data. Fundamental Of Engineering Data 14.04
GVER04 14.04 GLOBE VALVE Fundamental Of Engineering Data Fundamental Of Engineering Data INDEX 03 04 05 06 07 PRODUT FEATURES MODEL SELECTION GUIDE GLOBE VALVE ASSEMBLY DIMENSION KS/JIS 10K RF, ANSI CL
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationSeries 240 Pneumatic Control Valve Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valve Type 3244-1 Type 3244-7 Three-way Valve Type 3244 with long insulating section circulation inhibitor ANSI version Application Mixing or flow-diverting valve for cryogenic
More informationWaterMAG. Electromagnetic Flowmeter for Water Applications. Model MCB10A OVERVIEW APPLICATIONS FEATURES. No. SS2-MCB
WaterMAG Electromagnetic Flowmeter for Water Applications OVERVIEW The WaterMAG is an electromagnetic flowmeter for water measurement applications based on field proven Azbil Corporation's technologies.
More informationZH series linear actuator control valve. ZHP type Single Seat Series
ZH series linear actuator control valve ZHP type Single Seat Series DATIAN CONTROL VALVE Nowadays with the development of the modernized industrial automatic controlling system progressing, the requirement
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationSeries 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
More informationSeries 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves
Product Specification PS100401 2010. 04 Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves for promotes more tightness and heavy duty control Series 3500 Control Valves Globe
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationValve Series V2001 Three-way Valve Type 3323
Valve Series V2001 Three-way Valve Type 3323 Fig. 1 Type 3323 Valve with mounted rod-type yoke (partial view) Edition January 1999 Mounting and operating instructions E 8113/8114 EN 1. Design and principle
More informationSmart Electromagnetic Flowmeter Detector for Sanitary use
MagneW3000 PLUS Smart Electromagnetic Flowmeter Detector for Sanitary use Model MGS28U OVERVIEW The MagneW3000 PLUS Smart Electromagnetic Flowmeter for Sanitary use is a high-performance and highly-reliable
More information3. Installation and Commissioning 4. Maintenance 5. Spares
INSTLLTION ND MINTENNCE INSTRUCTIONS IM-P305-06 US November 2003 1/2" to 4" (DN15 to DN100) KE41, 43, 61, 63, 71 and 73 NSI Control Valves 1. Safety 2. Technical details 3. Installation and Commissioning
More informationSeries 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationSeries 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure
More information599 Series Zone Valve Bodies:
599 Series Zone odies: Two-Way and Three-Way Technical Instructions VE VV- VE065R VE066R Description Features pplication Ordering a The 599 Series two-way and three-way Zone s with a /0-inch (.5 mm) stroke.
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationTwo port valves. pneumatically actuated
Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use
More informationSERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
More informationCV3000 Alphaplus Series Electric Top-Guided Single-Seated Control Valves Model: AGVB / AGVM. User s Manual
CV3000 Alphaplus Series Electric Top-Guided Single-Seated Control Valves Model: AGVB / AGVM User s Manual CM2-AGV300-2001 Copyright, Notices and Trademarks While this information is presented in good faith
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationKTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationMaxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
More informationMaxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationGLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION
GLOBE 3 WAY CONTROL VALVE SERIES - 130 INTRODUCTION Pneucon' 3 way control valves are used to combine two flows or to divert one flow into two outlets. They are designed to replace and perform the functions
More informationSpecifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationIntroduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control
Introduction Globe and Angle Body Control Valves In Line Valve provides Solutions to Flow Control In Line Valve Globe Control Valves use the variable area generated between the plug and seat to control
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Control valves for heat transfer applications using organic media according to
More informationThe Multivariable Air Flow Meter
The Multivariable Air Flow Meter Model MVC10A/MVC10F OVERVIEW The Multivariable Mass Flow Meter model MVC10A/ MVC10F, a compact has all function necessary to measure nitrogen (N 2 ) gas, carbon dioxcide
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
More informationMagneW Neo+ Two-wire Electromagnetic Flowmeter Integral type TIIS Explosion-protected Apparatus
MagneW Neo+ Two-wire Electromagnetic Flowmeter Integral type TIIS Explosion-protected Apparatus OVERVIEW The MagneW Neo+ is a high performance two wired electromagnetic flowmeter based on field proven
More informationA single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
More informationMaxifluss Rotary Plug Valves VETEC Types 73.3/M and 73.7/M
Maxifluss Rotary Plug Valves VETEC Types 7./M and 7.7/M Application Double-eccentric control valve for process engineering, industrial applications, and refineries Nominal sizes DN 25 to 400 1 to 16 Nominal
More informationSmart Displacement type Level Transmitter
No. SS-SLX100-0100 Smart Displacement type Level Transmitter model SLX OVERVIEW The SLX series is a complete line of highly accurate and reliable high-performance torque tube type displacement level transmitters
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More informationGV-A Manufactured by Germany s Elster GmbH High-Performance Gas Solenoid Valve for Industrial Applications
No. CP-SS-1880E GV-A Manufactured by Germany s Elster GmbH High-Performance Gas Solenoid Valve for Industrial Applications Overview The GV-A High-Performance Gas Solenoid Valve for Industrial Applications
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More informationThe Multivariable Air Flow Meter
No. SS2-MVC200-0100 OVERVIEW The Multivariable Mass Flow Meter AIRcube, a compact has all function necessary to measure nitrogen (N 2 ) gas, carbon dioxcide (CO 2 ) gas and air. The model MVC10A/MVC10F
More informationAir Operated Valve Control Valve
Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to
More information220 Series Innova-Flo o
Smart Vortex Flow Meter Features Volumetric flow monitoring of most gases, liquids and steam Smart electronics extends range down to a Reynolds number of 5000 Insertion style allows installation in any
More informationControl Valves for General Applications
Control Valves for General Applications 2 CCI s 8G/8H delivers superior control performance and reliability. The series 8 cage-guided valve is specially designed using recent advancements in control valve
More informationDN PN C 1 / Class F DN 15A A JIS 10K/20K C
Series 240 250 280 Pneumatic and Electric Control Valves Information Sheet DN 15... 500 PN 10... 400 200... 500 C 1 /2... 16 Class 125... 2500 325... 930 F DN 15A... 250A JIS 10K/20K 200... 500 C Associated
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationTemperature Indicating Controller
\ KF Series Temperature Indicating Controller Model KFT OVERVIEW The KF Series instruments are field-installed type of pneumatic indicating controllers which are used to measure and control the various
More informationGLOBE 2 WAY CONTROL VALVE SERIES - 110
ACAD/PVCT/PVCT - 1 GLOBE WAY CONTROL VALVE SERIES - 1 INTRODUCTION This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat
More informationSpecifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys
CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 1 0 / 5 2 0-1 FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. plugs for use
More informationPilot operated 2 port solenoid valve (general purpose valve) AP11/AP12 Series. Air, water, kerosene, oil (50 mm 2 /s or less) -10 to to 60 B
Pilot operated port solenoid valve (general purpose valve) P/P Series NC (normally closed) type, NO (normally open) type Port size: Rc/4 to Rc Piston structure Refer to Ending 7 for more details. JIS symbol
More informationTABLE OF CONTENTS INDRODUCTION
TABLE OF CONTENTS Model Numbering System ---------------------------------------------------------------------------------------------------------- Available Sizes and Ratings -------------------------------------------------------------------------------------------------------
More informationGeneral purpose direct acting 2, 3 port solenoid valve
eneral purpose direct acting, 3 port solenoid valve (eneral purpose valve) eneral purpose Direct acting, 3 port solenoid valve / Pilot operated/pilot kick type port solenoid valve P/D/PK/DK Page 9 9 P/
More informationSeries 2000 Control Valves Globe-Double Seated, Top & Bottom Guide
Product Specification PS100401 2010. 04 Series 2000 Control Valves Globe-ouble Seated, Top & Bottom Guide for promotes more tightness and heavy duty control Series 2000 Single Seated Globe Valve with Model
More informationWYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S
Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationControl valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
More informationCV3000 Series Control Valves Model: AMT. User s Manual
CM2-AMT100-2001 CV3000 Series Control Valves Model: AMT User s Manual AMT000001000P Copyright, Notices and Trademarks While this information is presented in good faith and believed to be accurate, Azbil
More informationHoneywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
More informationPneumatic Control Valve Type and Type Micro-flow Valve Type 3510
Pneumatic Control Valve Type 3510-1 and Type 3510-7 Micro-flow Valve Type 3510 ANSI version Application Control valve designed for controlling low flow rates in pilot plants and technical research facilities.
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More informationBOA-CVP H. Type Series Booklet
Control Valve BOA-CVP H PN 16/25 DN 20-150 Type Series Booklet Legal information/copyright Type Series Booklet BOA-CVP H KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationMaxifluss Rotary Plug Valve - VETEC Type 82.7
Valve Size NPS 1 to 12 ANSI Pressure Class CL 150 and 300 Temperature Range of Medium -320 F to +1022 F (-196 C to +550 C) Valve Body Material Cast carbon steel Low temperature carbon steel Cast stainless
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More information