Keyway 3 x 12. Max Input Speed
|
|
|
- Felicity Maxwell
- 6 years ago
- Views:
Transcription
1 Range 2.2Nm to 4.1Nm 25:1-400:1 HPCPP5 Double Reduction, Worm Gear Reducers 0.7 Kg MAX INPUT SPEED 000 CASE MAT L Aluminium HE0TF (4) ø x Shaft ø 8.00 h7 (8) tapped Holes,M4 x ø10.00 h7 Shaft x 20 DOUBLE REDUCTION HPCPP HPCPP : NO HPCPP : NO HPCPP : YES HPCPP5-SP Standard s: Replace SP with required ratio figures are to be used for guidance only. Telephone+44(0) Fax +44(0)
2 DOUBLE REDUCTION HPCPP50 Range 6.5Nm to 12.8Nm Double Reduction, Worm Gear Reducers 8 25:1-400:1 HPCPP50 HPCPP : NO HPCPP : NO HPCPP : YES HPCPP50-SP Standard s: Replace SP with required ratio figures are to be used for guidance only (4) ø Kg MAX INPUT SPEED 000 CASE MAT L Aluminium HE0TF x Shaft ø h (8) tapped Holes,M8 x25 ø15.00 h7 Shaft 5 x 20 Telephone+44(0) Fax +44(0)
3 Range 17.8Nm to 4Nm 25:1-400:1 HPCPP60 Double Reduction, Worm Gear Reducers. Kg MAX INPUT SPEED 000 CASE MAT L Aluminium HE0TF (4) ø x Shaft ø h7 (8) tapped Holes,M8 x ø20.00 h7 Shaft 6 x DOUBLE REDUCTION HPCPP HPCPP : NO HPCPP : NO HPCPP : YES HPCPP60-SP Standard s: Replace SP with required ratio figures are to be used for guidance only. Telephone+44(0) Fax +44(0)
4 Technicals HPC P, PF & PP TYPE PRECISION GEAR REDUCERS Technical Page HPC P, PF & PP Type Precision Worm Gear Reducers Technical Backlash (P-PF): Backlash figures given are at output. Standard backlash approx. 0 arc mins. Low backlash approx. 8 arc mins. On low backlash gearboxes eccentrics may be used to control backlash. Backlash (PP): 2º approx. : figures are given as a guide only. Specials: Specials are available to any specification. Please consult our HPC Gears Technical Department. Modifications: Are available on all our standard gearboxes. Please consult our HPC Gears Technical Department. s, Bores & Shafts: All bores are toleranced to H8 ISO 286. All shafts to h7 (ground). s are machined to allow the use of parallel DIN 6885 keys (sliding fit). Lubrications: are greased for life with Shell Gadus S5 V4 2P2.5 (synthetic high speed bearing grease). s (P-PF): 10:1-120:1. Specials are available. Please consult our HPC Gears Technical Department. s (PP): 10:1-400:1. Materials Case: Red anodised billet machined aluminium (6082 T6). Worm: High carbon steel (817M40). Wheel (P-PF): Billet machined aluminium bronze (CA104) P15 - P45. P55 - P70 use high carbon steel, output hub fitted with aluminium bronze wheel. Wheel (PP): Billet machined aluminium bronze (CA104). Bearings: High quality steel single row bearings with rubber or steel shields. Screw Caps: Mild steel with a chemically blacked coating. Lubrication, Mounting and Operating Conditions Operating temperature range 0º C to 70º C. Wider range of operating temperatures are achievable by fitting steel shielded bearings - 0º C to +10º C. Please consult our HPC Gears Technical Department for advice. are designed as speed reducers. Shafts should always be connected with a flexible coupling. Always mount drive components as close to gearbox body as possible to prevent damage to shaft and bearing. Avoid all impact to unit on installation as this may cause internal damage. We recommend all modifications are carried out by HPC Gears prior to gearbox assembly Telephone+44(0) Fax +44(0)
5 Shafts Single & Double Sided For HPCP-X & HPCP-DX Worm Reducers HPCP-X Single Sided List Price -10% -15% -20% -25% -0% ød O/L M P X L K Material: 0 Stainless Steel, includes Steel Keys & Circlips. Telephone+44(0) Fax +44(0) SINGLE SIDED HPCP20-X K2 x HPCP0-X K2 x HPCP40-X K x HPCP45-X K4 x HPCP55-X K5 x HPCP60-X K6 x HPCP70-X K8 x HPCP-DX Double Sided ød O/L M P X L K DOUBLE SIDED HPCP20-DX K2 x HPCP0-DX K2 x HPCP40-DX K x HPCP45-DX K4 x HPCP55-DX K5 x HPCP60-DX K6 x HPCP70-DX K8 x OUTPUT SHAFTS SINGLE & DOUBLE HPCPX-HPCPDX 1.2
WEIGHT. Circlip. Keyways 2mm Js9
Gearboxes CROSSED HELICAL, REDUCTION GEARBOX HPCE20 Gearboxes Range Ratio 0.Nm to.8nm 1:1-0:1 Crossed Helical, Reduction (Hardened Gears) HPCE20 M x 8 deep HPCE20-1 1:1 Helical 88 000 000 YES 17.29 HPCE20-2
WEIGHT. Reduction ratio 2:1 3:1 4:1 5:1 6:1 7:1. Max Input Speed
OFFSET SPUR GEAR REDUCERS HPCFF10 ø15 HPCFF10 HPCFF10-2 2:1 93 2000 1000 1.55 125.88 HPCFF10-3 3:1 93 2000 666 1.49 125.88 HPCFF10-4 4:1 93 2000 500 1.33 125.88 HPCFF10-5 5:1 93 2000 400 1.27 125.88 HPCFF10-6
PRECISION GEARBOXES Mounting Instructions
PRECISION GEARBOES Mounting Instructions Avoid impacting force when fitting drive components to gearbox shafts. Internal damage to the gear train may occur. Gear, pulley or sprocket mounted at the outer
CHM and CHMR gear gearboxes CHM
CHM and CHMR gear gearboes CHM Technical information CHMR.Maimum output. When used with a double output shaft, the total of the combined s should not eceed the values given in the table below Loads are
GEARBOXES Internal Epicyclic Servo Reducers 5mm Bore Input, 10mm Shaft Output, 3.4 7Nm 3:1-6:1
EHD04 GEARBOXES 5mm Bore, 10mm Shaft Output,.4 7 :1-6:1 (4) Ø. x 5 Deep ( PCD) (4) M x Deep ( PCD) 4 Keyway 15 (4) holes for M Capscrews on 26PCD 2.5 Ø2.00 Ø1.95 Ø5 H7 Ø1 Ø10 h7 12.5 27.5 61.5 The back
Worm gear. Worm Gears. Description. Special features. Customer specific
Worm gear Worm Gears 2010 Description Worm gear for universal applications Center distance 20 mm Compact design Outer dimensions 60x60x35 mm 7 ratios of 13:1 to 65:1 Aluminium housing, anodized Maintenance-free
V Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio
HP High-Performance Gear Units with <2' Adjustable Backlash
Page HP High-Performance Gear Units with
ASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Four Row Linear Recirculating Ball Bearing and Guideway Assembly with Gear Rack
Four Row Linear Recirculating Ball Bearing and Guideway Assembly with Gear Rack Series KUVE..SB ZHP Features NEW! Guideway with Gear Rack Four Row Linear Recirculating Ball Bearing and Guideway Assembly
6 5 f2 L7. ØD1j6 ØD12 L21. 2 Model L-Series V-Series
L8 f3 V Series & L Series ØD6 ØD j6 ØD6 L3 L8 f3 ØD1j6 B0 C0 G0 H0 ØD j6 0 3 9 1 1 L D0 J0 ØD1j6 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0,
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
https://amironic.co.il/ COUPLINGS Oldham Lateral Offset Coupling Set Screw Fixing : Blind Hub : Nm : 2-20mm Bores
BG COUPINGS Oldham ateral Coupling Set Screw Fixing : Blind : 0.7-57 : - 0 Bores ØA BG BG9 BG3 BG9 BG5 BG33 BG33S BG BG BG9 BG3 BG9 BG5 BG33 BG33S BG 0 0 0 0.00 Deg/ 5.700.900 0.0 0.0 0.0 /rad 0 30 5 5
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
Tooth thickness Dedendum. Addendum. Centre distance Nominal
FORMULAS SPUR GEARS TO FIND:- PCD ØD MODULE No. of TEETH CP ADDENDUM DEDENDUM MODULE No. of TEETH x MOD (mm) (No. of TEETH + ) x MOD (mm) 5.4 MODULE CP π (mm) PCD MODULE (mm) MODULE x π (mm) MODULE (mm)
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
ILG-D Series Cast Iron Housing Declutchable Gear Operators
ILG-D Series Gear Operators The Rotork Gears ILG-D gear operators are designed to provide a means of manually overriding pneumatic valve actuators in power and process applications. These gear operators
Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
TECHNICAL CHARACTERISTICS
GEARBOX WM 26 8 Nm TECHNICAL CHARACTERISTICS Worm gearbox. Life-time lubrication by grease, therefore it is main tenance-free. Housing. Die-casting aluminium. Worm-shaft. Hardened steel with grinding.
Highest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
Tandler. Hypoid. Servo Gearheads
Tandler Hypoid Servo Gearheads ServoFoxx Hypoid Gearboxes The new Hypoid gearbox from Tandler offers the ultimate in performance and connection versatility for dynamic servo driven applications. Benefits:
Technical Data Part-turn gearbox 2SP78
Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
DRIVE-TECHNOLOGY INKOMA - GROUP. KG bevel shaft mounting right angle gear units
-GROUP - DRIVE-TECHNOLOGY GROUP KG bevel shaft mounting right angle gear units -GROUP Headoffice Sitz der Maschinenbau GmbH Neue Reihe 44 D - 38162 Schandelah - Germany phone: +49/(0)5306-9221-0 fax: +49/(0)5306-9221-50
Reduction ratio. Factor 1)
Max. valve torque to [Nm] 90,000 63,000 125,000 125,000 64,000 250,000 250,000 Valve Flange according to EN ISO 5211 F40 200 F48 250 F60 315 Gearbox/primary Factor 1) Gearbox Turns for 90 Input shaft 2)
Performance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
Miniature Precision Worm Gear Reducers Fitted with Miniature DC Motor Nm MAX (4) M2 x 2 Deep. Rated Output Torque Nm 32:1
Miniure Fitted with Miniure DC 0.03 Nm.7 MAX20394 2. Wt run V DC 18.7 PREM Ø13 Ø3 h8 1. 31. 13. (4) M2 x 2 Deep 9 1. 10. Part Number PREM-32 PREM-32-13 Part Number MAX20394 Red Nm 32:1 32:1 Fitted 0.03
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
Materials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Long neck for isolation Wafer
Highest Performance: Dyna Series
Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space
Bearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
L1 (Standard Motor Length) L2 (Brake Motor Length)
HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Selection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
Size : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
*the installation defects and wear defects are not covered by the guarantee
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
Factor 2) 160:1 6) /(30) FA10 (FA14) :1 6) /(30) FA10 (FA14) 27 86
to [ft-ib] Valve Max. valve Valve attachment Gearbox Reduct. torque 1) Modulating torque 4) to [ft-ib] Flange acc. to MSS SP 101 Factor 2) Turns for 90 Gearboxes Input shaft Input mounting fl ange for
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
DYNA GEAR. The highly dynamic servo right angle gearbox.
MS- Gr a es s ne r GmbH & Co. K G THE GEAR COM PAN Y The highly dynamic servo right angle gearbox Internal highlights The design of the DynaGear range has been influenced by extremely varied applications
Materials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 130 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
Size : Ends : Min Temperature : Max Temperature : Materials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
Lenze spring applied brakes
Type BFK 458 N Spring applied, electromagnetic release Factory preset torque Simple, quick assembly Adjustable for wear Very robust Torques 2 to 600 Nm S1 continuous rated Static and dynamic braking No
Materials : Ductile iron EN GJS body, PTFE seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and Class 150 (PN20) - 25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Factor 3) Max. input torques Flange 38 GS : F ,000 F10 F ,000 F12 82:
Duty class 1 1) Mor open in accordance with EN 15714-2. Valve output Valve attachment Gearboxes Reduction Facr 3) rque 2) Turns for 90 Gearboxes Input shaft Input mounting flange for multiturn actuar input
Materials : Ductile iron body EN GJS, carboxylic NBR seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 90 C Max Pressure : 16 Bars Specifications : Long neck for isolation
EJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
Materials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
Highest Precision: Dyna Series
Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
Bevel gearboxes. KSZ and KGZ Advantages. Same mounting height no support plates required. Suitable for standard motor flanges
KSZ and KGZ Advantages Same mounting height no support plates required Screw jack gearboxes ZIMM bevel gearboxes KSZ and KGZ have the same installation height as the ZIMM screw jack gearbox. No support
P 1 V - P F B
Radial piston air motors P1V-P P1V-P is a range of air motors using the radial piston principle. Radial piston motors can operate at a low speed while delivering high torque. The low speed keeps the noise
Performances. Heavy duty, planetary to bevel, right-angle, servo gearbox. Up to 350 Nm rated 9
Up to 350 Nm rated 9 Mra line Heavy duty, planetary to bevel, right-angle, servo gearbox Backlash: from 15 to 5 minutes* Hollow shaft, double shaft or quadri-shaft versions available Efficiency: from 91%
Performances. Standard range dedicated to servo-applications requiring precision, robustness and economy. Up to 290 Nm rated 6
RATIO GROUP A: 1 stage, i = 4-5 - 7-10 2 stages, i = 16-20 - 25-28 - 35-40 - 49-50 - 70-100 RATIO GROUP B: 1 stage, i = 3-4 - 5-7 - 10 2 stages, i = 12-15 - 16-20 - 21-25 - 28-35 - 40-49 - 50-70 - 100
MECHANICS. Aluminium profiles Linear guides Drive elements Linear units Rotational units
Aluminium profiles...2-2 Linear guides...2-18 Drive elements...2-44 Linear units...2-52 Rotational units...2-94 Aluminium profiles Aluminium profiles PP profiles Panel profiles PP PP 100 PP 1 PP 200 Overview
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
AKZG50E4SGL. Materials : Ductile iron EN GJS 500-7, food silicone seat. *the installation defects and wear defects are not covered by the guarantee
AKZG50E4SGL Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
DCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors mm - 5 W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP5 In accordance with U - CE - ROHS regulations Part numbers V V V Type 95
Tooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P
Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication
Materials : Ductile iron EN GJS body, EPDM seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck
BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
DCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors 6 mm - W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP6 In accordance with U - CE - ROHS regulations Part numbers V V 8 V 9 V Type
Highest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
BEVEL GEARBOXES. Bevel gearboxes Advantages. Same mounting height no support plates required. Additional attachment options. Screw jack gearboxes
Bevel gearboxes Advantages Same mounting height no support plates required Screw jack gearboxes Bevel gearboxes The new ZIMM bevel gearboxes in the KSZ-H series have the same fitting height as the ZIMM
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
The STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
Materials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
DIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
DYNA GEAR. DYNA GEAR Economy The cost effective right angle servo gearbox. Dynamic and Precision
MS-Graessner GmbH & Co. KG THE GEAR COMPANY Dynamic and Precision Economy The cost effective right angle servo gearbox Precision combines with performance. Bevel gear technology is at the heart of an assembly
Technical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
Maintenance Guide COMPABLOC Reference: 5060 en / c
en Maintenance Guide COMPABLOC 3 Reference: 56 en -. / c GENERAL WARNING This document is an addition to the general manual ref. 55 (recommendations), ref. 3, ref. 3 (Atex specific recommendations), and
PNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
Flexible pin & bush coupling
Technical data KX-D Technical data Torque [Nm] NBR 80 Sh-A GJL Steel Dyn. torsion spring stiffness [Nm/rad] Max. speed Max. speed Rated Max. Vibratory [rpm] with Max. bore [mm] [rpm] with Max. bore [mm]
Air vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
ay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
drylin N Low-Profile Guide Systems
drylin N Low-Profile Guide Systems Low-profile height and width Replaceable polymer sliding pads Anodised aluminium rail High speed and acceleration possible Lubrication-free Low weight 925 drylin N drylin
Materials : Ductile iron EN GJS body, EPDM seat
Reinforced lug from DN200 to DN1400 : Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck length according HeizAnlV. External
RE34 PLANETARY GEARBOX
RE34 PLANETARY GEARBOX D1 5* 6.25* L2 20 20 * Only available for ratio 4, 16, 64. Input shaft dimensions Type Code Gear Dimensions L3 L4 D2 D3 D4 D5 D1xD2 max L1 1 Stage 2 Stages 3 Stages - - - - - - -
Highest Precision: Dyna Series
GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested modifications to give you
Gearboxes & Motor Mounts
Gearboxes & Motor Mounts Contents Description Page Gearbox for BHD Series 162-164 Gearbox for OSP-E Belt 165-168 Motor Mounts 169-170 Belt Gear for OSP-E..S, SBR 171 161 PLANETARY GEARBOX FOR THE OSP-E
MIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
Speed Correction Drives
Speed Correction Drives For Shaft Phasing and Narrow Range Speed Control Low Backlash Low Transmission Error Wide Range of Ratios Variety of Specialty Models AVAILABLE THROUGH Motion Components and Engineering
GEARBOXES for operation of industrial valves
GEARBOXES for operation of industrial valves TECHNICAL DOCUMENTATION 2018 Part-turn gearboxes GS 50.3 GS 250.3 GS 50.3 GS 250.3 with base and lever GS 315 GS 500 GS 630.3 GHE 05.1 GHE 12.1 Multi-turn gearboxes
Bevel gearboxes. Catalogue
Bevel gearboxes Catalogue INDEX Bevel gearbox description... page 2 Manufacturing features... page 2 Materials and components... page 4 Bevel gearbox selection... page 5 Thermal power limit... page 7
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
SIZES FROM 1, ,000 NM CROWNED GEAR COUPLINGS
BZ SIZES FROM 1,300-348,000 NM CROWNED GEAR COUPLINGS GENERAL INFORMATION ABOUT R+W CROWNED GEAR COUPLINGS: CROWNED GEAR COUPLINGS BZ FIT CLEARANCE Overall shaft / hub clearance of 0.01-0.05 mm TEMPERATURE
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE