INSTRUCTION MANUAL & REFERENCE GUIDE

Size: px

Start display at page:

Download "INSTRUCTION MANUAL & REFERENCE GUIDE"

Daisy Henry
6 years ago
Views:

1 INSTRUCTION MANUAL & REFERENCE GUIDE

2 The Serpent 966 is the next evolution of Serpent s hugely-successful 960 lineage, combining ultimate performance into a single package. The Serpent 966 was designed to be a world champion, while still being easy to use, assemble, and set up. You are now part of the worldwide network of Serpent drivers, which gives you superior technical support and access to many benefits that only Serpent drivers can enjoy. The Serpent 966 offers many of the same specifications and features that made the Serpent 90/90R into top-competition racecars. Continuously pushing the performance envelope, Serpent s engineers have added many new and innovative features that can help take your Serpent 966 into the winner s circle: stronger reinforced components, easier roll-centre adjustment, redesigned braking system, improved rear suspension design, adjustable rear antiroll bar, optional throttle servo positioning (laydown or upright), new improved shock absorbers, and new receiver pack configuration. EXPLODED VIEWS AND PARTS LIST The exploded views and parts lists for the Serpent 966 are included in the back of this manual. The exploded views show all the parts of a particular assembly step along with the Serpent part number. The parts lists indicate the part number and name of each part for easy reference when ordering. SAFETY Included with your Serpent 966 kit is a document entitled Read This First that covers safety precautions for the assembly and use of this product. We strongly recommend that you thoroughly read and understand that document, and follow all the precautions. INSTRUCTIONS Serpent s long tradition of excellence extends to their instruction manuals, and this instruction manual is no exception. The easy-to-follow layout is richly illustrated with D-rendered full-color images to make your building experience quick and easy. Following the instructions will result in a well-built, high-performance racecar that will soon be able to unleash its full potential at the racetrack. This instruction manual has been divided into sections that will logically lead you through the assembly process of your Serpent 966. Follow the assembly steps in the order presented to ensure that no problems occur during assembly. Each step indicates all the fasteners and small parts used. Bag numbers identify the kit bag(s) that contains the appropriate parts. CONTENTS FRONT ASSEMBLY REAR ASSEMBLY 9 RADIO PLATE ASSEMBLY GEARBOX ASSEMBLY CENTAX ASSEMBLY FINAL ASSEMBLY 7 REFERENCE GUIDE

3 USING THE MANUAL Each step contains a variety of numbers, lines, and symbols. The numbers represent the order in which the parts should be assembled. The lines and symbols are described below. Step number; the order in which you should assemble the indicated parts Length after assembly Assembly path of one item into another Group of items (within lines) should be assembled first Direction the item should be moved Glue one item to another Press/Insert one item into another Connect one item to another Gap between two items OW Apply graphite grease (GR), threadlock (TL), CA glue (CA) or One-way Lube (OW). (Items not included.) SERPENT.COM The printed instruction manual included with your Serpent 966 kit is very complete, though due to continuous product development, more up-to-date information may be provided at our Serpent.com website. All information about the Serpent 966 is accessible from the Serpent 966 product page which can be found on Serpent.com and can be accessed by simply typing serpent.com/90009 into your web browsers address bar. From the Serpent 966 product page you will find the very latest information about your Serpent 966: reports by team drivers and other experts, tips and tricks, setups, image gallery and downloadable files including the latest version of the instruction manual will be made available as downloadable PDFfiles.

4 A Bag OW FRONT ASSEMBLY OW A Mx0 Mx0 Mx0 Mx0 Mx0 Mx0 Looser Default Tighter Front Change the position of BOTH eccentric hubs to adjust front belt tension. Both hubs should have the same position.

5 A Insert setting - hole mounted to outside Mx Mx Mx Mx A Bag Mx8 Mx8 Mx8 Mx8 A 7mm Mx mm 6 Mx 7mm Completed assembly

6 A 6 Bag Mx6 6 Mx6 Mx0 Servo Saver Ackermann insert position Mx0 0.mm A 7 Bag Press anti-roll bars into mounts far enough so the bars do not bind when the suspension is compressed Mx6 6 Mx6 6 Mx 6 Mx6 Mx8

7 A 8 mm mm Spacer Placement mm mm Mx6 Mx6 Mx A 9 Bag Note Orientation of eccenter Mx 6 7 Mx A 0 TOP.mm BOTTOM.mm 7

8 A Assemble L & R steering rods: 87.mm A Mx6 Mx8 Mx6 Mx8 8

9 B Bag 6 REAR ASSEMBLY Insert setting - hole mounted to top Mx0 Mx0 B Mx6 Mx6 Mx0 Mx0 Mx0 B Mx8 B Mx8 OPTIONAL RH Mx8 9

10 B Bag 7 Mx6 Mx6 Mx6 Mx6 Mx6 Mx6 Looser Tighter B B 6 Mx0 Mx0 Mx Mx0 Mx0.8mm 0

11 B 7 Bag Mx Assemble both rear hubs using the indicated steps. B 8 Front.0mm.7mm B 9 Mx0 Mx0 Mx6 Mx0 Mx0

12 B 0 mm mm mm mm Mx6 Mx6 Default Rear Body Mount Mounting Position B Bag 9

13 B B OPTIONAL A In case you plan to use the connectors, then mount the Mx8 RH Mx6 B B B Mx0 Mx0 Mx0 Mx0 B M.x Mx6

14 B Mx B 6 B OPTIONAL Assemble L & R linkages B OPTIONAL 6 Mx Mx 0mm

C Bag 0 RADIO PLATE ASSEMBLY Use the following servo arms with these brands of servos.

Reverse the default orientation to mount a smaller servo.

15 C Bag 0 RADIO PLATE ASSEMBLY Use the following servo arms with these brands of servos. - Sanwa / KO / JR - Hitec - Futaba Mx0 Mx6 6 Mx6 Steering Linkage STEERING SERVO Servo output shaft must be towards FRONT of the car. Mx6 Mx6 Note the orientation of the servo mounting screw blocks. Reverse the default orientation to mount a smaller servo. C OPTION Laydown Throttle Servo THROTTLE SERVO Servo output shaft must be towards REAR of the car. Mx0 Note the orientation of the servo mounting screw blocks. Reverse the default orientation to mount a smaller servo. Mx6 Mx6

16 C OPTION : Laydown Throttle Servo Mx0 Mx0 Mx6 Mx6 Use the following servo arms with these brands of servos. - Sanwa / KO / JR - Hitec - Futaba Throttle Linkage 6mm C OPTION Laydown Throttle Servo Mx0 Mx0 6 RACING TIP: To protect the receiver against fuel and moisture, seal the wired receiver into a rubber balloon before mounting it. Securely attach receiver to mounting plate.

C Mx6 OPTION : Upright Throttle Servo Mx6 Securely

17 C Mx6 OPTION : Upright Throttle Servo Mx6 Securely attach receiver to mounting plate. RACING TIP: To protect the receiver against fuel and moisture, seal the wired receiver into a rubber balloon before mounting it. Mx Mx C 6 Mx FUEL CAP FITTING PLACEMENT CW tracks: Fitting on RIGHT side. CCW tracks: Fitting on LEFT side. Mx0 7

18 C 7 Bag Mx0 Mx0 Mx0 Mx0 C 8 Mx0 Mx0 Mx0 Mx0 Servo Saver 8 Steering Linkage

19 C 9 Mx Mx C 0 Bag Unscrew the bottom half of the pre-assembled shock absorbers. FILLING Fill the shock body with the supplied shock absorber oil. BLEEDING Let the oil settle and allow the air to escape. Slowly move the piston up and down to release any trapped air bubbles. Repeat as necessary until no bubbles appear. 9

20 C With the shock body filled with oil, slowly screw the bottom half of the pre-assembled shock back onto the shock body. IMPORTANT! Do not cross thread! Oil will overflow through the built-in bleed channel in the threads. Front shock 68mm Rear shock 7mm C Front Mx6 Mx6 Note the lower shock mount holes used. Pink Spring 0

21 C Purple Spring Note the middle shock mount holes used. C M.x M.x C Mx0 Mx0 Mx0 Mx6 Mx6

22 D Bag GEARBOX ASSEMBLY GAP SETTING screw Mx Mx SHIFT POINT screw Start with screw head flush with bottom edge of hole. Both screws must be set equally. Mx Mx SHIFT POINT screw D Mx6 Mx6 Mx6 st Gear 8 T

There should be equal but minimal spacing between the -speed shoes and the nd gear drum.

23 D nd Gear T Mx6 Mx6 Mx6 D mm Mx8 ADJUSTING THE -SPEED SHOE GAP Loosed the two gap-setting set screws to allow the shoes to rest on the drive adaptor. Install the -speed shoes in the nd gear drum, but do NOT install the st gear. There should be equal but minimal spacing between the -speed shoes and the nd gear drum. Tighten BOTH gap setting set screws until the shoes touch the inside surface of the aluminum nd gear drum, then loosen BOTH set screws by / turn each. The nd gear should spin freely. Install the first gear.

24 E Bag CENTAX ASSEMBLY IMPORTANT! Use the cone that comes with your engine E

25 E.mm Initial clutch spring tension E Note inside shoulders E nd Gear 9 T st Gear 6 T A B.mm.0mm IMPORTANT! Install thrust bearing plates as shown A Large inner dia. B Small inner dia. Mx6

E 6 A ADJUSTING THE CLUTCH GAP Install only the clutchbell and the thrustbearing assembly on the engine crankshaft.

Push B Pull the clutchbell away from the clutch shoe, and then measure the distance B as indicated.

7mm, you can easily calculate the thickness of shims required to set the correct gap: Thickness of shims required (in mm) = A B 0.

26 E 6 A ADJUSTING THE CLUTCH GAP Install only the clutchbell and the thrustbearing assembly on the engine crankshaft. Push the clutchbell onto the clutch shoe, and then measure the distance A as indicated. Push B Pull the clutchbell away from the clutch shoe, and then measure the distance B as indicated. The clutch gap is A B; the correct gap is 0.7mm. If the clutch gap is greater than 0.7mm, you can easily calculate the thickness of shims required to set the correct gap: Thickness of shims required (in mm) = A B 0.7 Pull For example, using the values A=.mm, B=0.mm Shim thickness = = 0.mm Place shims between the outer thrustbearing plate and the rim of the thrustbearing carrier as shown. Thrustbearing Thrustbearing carrier Place shims here E 7 ADJUSTING THE END PLAY 6 Place small shims to remove all but a small amount of end play

27 F Bag FINAL ASSEMBLY MX6 MX6 MX MX F Mx6 Mx0 Mx6 7 Orientation of belt tensioner bearings

F Bag 6 6 OPTION : Laydown Throttle Servo Mx6

- Sanwa / KO / JR - Hitec - Futaba OPTION :

28 F Bag 6 6 OPTION : Laydown Throttle Servo Mx6 Mx Mx 7 Throttle Lever Mx Mx OPTION : Upright Throttle Servo 8 F Use the following servo arms with these brands of servos. - Sanwa / KO / JR - Hitec - Futaba OPTION : Laydown Throttle Servo Mx6 Completed throttle/brake linkage mm 8

29 F OPTION : Upright Throttle Servo Mx6 Completed throttle/brake linkage Mx6 F 6 Side belt tension adjustment Looser Tighter Mx 9 7 Mx6 6

30 F 7 F 8 Mx6 Mx6 Mx6 Mx6 Securely attach battery pack to mounting plate. 0

32 REFERENCE GUIDE

33 FRONT ASSEMBLY

34 REAR ASSEMBLY 9008

RADIO PLATE ASSEMBLY 9 60 906 9078 906 9070 009 009 070 60 906

00 90 00 908-908- 908-009 008 008 908 60 008 008 07 90 90 90 90

35 RADIO PLATE ASSEMBLY OPTION: Laydown Throttle Servo OPTION: Upright Throttle Servo

36 SHOCK ASSEMBLY Red White* 60 - Yellow* 60 - Orange* 60 - Pink* 60 - Blue* Purple* Green* Grey* Black* Purple White* Yellow* Orange* Red* Pink* Blue* Green* Grey* Black* #90 - Revision-set RCC shocks #90 - RCC Shock-set short 009 () #90 - RCC Shock-set long 009 () * - Optional

37 RADIO PLATE MOUNTING

38 GEARBOX ASSEMBLY #900 - Speed gearbox LC (no shaft incl.) #906 - Speed shaft T 90 - T* 906-6T* T 907-7T* 909-9T* * - Optional CLUTCH ASSEMBLY 699 (optional use) Centax-II clutch set (excl. flywheel) - # T T* T* T T* T* * - Optional

6// 07 69 69 68 06 69 07 68 008 90 06 008 66 9096 Not Included 69 68 00 007 06 90 69 808 66 69 908 07 90 900 90 00

39 6// Not Included Not Included 90 0 Not Included Not Included FINAL ASSEMBLY Not Included

40 SERPENT 966 PARTS LIST SERPENT 966 /8 WD KIT ART No. DESCRIPTION MANUAL, DECALS 907 Manual Reference guide Decal sheet 966 () RADIO INSTALLATION / BATTERY 070 Grommet rubber soft () 96 Washer nylon Mx7x0. () 6 Servo lever T, double arm () 6 Servo lever T, double arm () 6 Servo lever T, double arm () 69 Wire-guide nylon 66 Throttle linkage set 68 Brake-linkage set 69 Collar alu. + setscrew () 60 Balls 6mm/setscrews hex () 6 Spring small () 80 Receiver cover 908 Servo lever T, single arm 909 Servo lever T, single arm 9060 Servo lever T, single arm 909 Receiver bracket Mounting bracket steering servo 908 Rod mm threaded L + R () 9070 Shaft, throttle lever 907 Throttle slide part 908 Throttle lever 90 Bracket throttle-brake servo 90 Mount-supports servo 908 Servo lever T, single arm 909 Servo lever T, single arm 900 Servo lever T, single arm 90 Battery-support plate S960 Carbon 907 Receiver bracket 70 / Mount st servo V+ transponder mount 9097 Mount steering-servo V 90 Ball joints frame ++ SERVO SAVER AND STEERING 908 Track-rod set () 90 Servo-saver shaft inner 90 Servo-saver shaft outer 90 Servo-saver pre-tension nut 909 Servo-saver spring hard 90 Servo-saver set 960 nylon adj. 900 Ball joints.8mm frame FUEL TANK AND PARTS 6007 Fuel Cap seal silicone () 8 Fuel cap with shaped seal 9 Pressure nipple 60 Tank-clips small (0) 90 Mounting-pin tank + rubber cap () 906 Cap rubber for mounting pin tank () 906 Shim.x8x nylon 9078 Fueltank cc AFL cap / shaped seal SHOCK ABSORBERS 906 Shock-set front () 906 Shock-set rear () 9066 Piston rod FR () 9067 Piston rod RR () 9068 Nylon parts frame shocks 9069 shock bottum () 907 O-ring 0x () 907 O-ring.8x. () 907 O-ring x.6 () 907 E-clip.mm () 907 Foam insert () 9076 Nut adj alu + o-ring () 9077 Nut shock alu () 9078 Body alu shock FR () 9079 Body alu shock RR () 8096 shock-rcc revision-set 907 Balljoint demper 009 SHOCK SPRINGS 6000 Spring white L (./) () 600 Spring yellow L (.8/6) () 600 Spring orange L (./9.) () 600 Spring red L (./.) () 600 Spring pink L (.0/8) () 600 Spring blue L (.8/) () 6006 Spring purple L (6.8/9) () 6007 Spring green L (8/.) () 6008 Spring grey L (9/.) () 6009 Spring black L (0/7) () 600 Spring-set short (x) 600 Spring white L7 (./) () 60 Spring yellow L7 (.8/6) () 60 Spring orange L7 (./9.) () 60 Spring red L7 (./.) () 60 Spring pink L7 (.0/8) () 60 Spring blue L7 (.8/) () 606 Spring purple L7 (6.8/9) () 607 Spring green L7 (8/.) () 608 Spring grey L7 (9/.) () 609 Spring black L7 (0/7) () 600 Spring black L7 set (x) CHASSIS / RADIO PLATE 90 Radio plate bracket 907 Roll-bar chrome 900 Radio plate S Sideplate R carbon 9077 Washer alu conical M () 90 Sideplate bushing Chassis 966 LCG 90 Sideplate L 966 carbon BODYMOUNTS FR and RR 60 Body clips (0) 808 Body mount universal 808 Centering bushing threaded 90 Body plate FR 900 Bodymount RR 9060 Arms body-mount long RR () 909 Pivot pins body mount upper () 909 Pivot bushings rear body mount () T-bracket rear body support FRONT SECTION 06 O-ring for alu front axle (0) 089 Shim nylon adaptor FR 6.xx () 9096 Belt 60SM0 Orange 8098 Adjustable Nut Nylon (0) 800 Anti-roll bar blades set FR soft 808 Caster spacer set () 8086 Pivot balls steel 8.mm () 900 Bumper

41 907 Springs quick-change short () 907 Wheel-nut alu + O-ring () 908 Driveshaft FR cv-set () 908 Insert alu CV () 9006 Wishbone FR upper L 9007 Wishbone FR upper R 908 Eccentric nylon () 906 Susp bracket alu FR upper L + R 90 Steering block WOS (+) 906 Wishbone front lower () 906 Anti-roll bar lever/downstop front 906 Bearing block front left Bearing block front right Wheel-axles front CV set OS 9067 Lever alu /spring/pin FR OS () 907 Pivot pin x8mm () 9090 Shim wheelaxle OS 8xxmm () 90 Roll center carbon spacer mm 909 Shock-support carbon FR v 900 Cvd-shaft FR OS set () 909 Shim x8x0.mm () 909 Front axle alu. with OWB 9096 Pivot pins front upper () 9 Inner driveshaft adaptors () 9 Pulley / flange T 9087 Eccenters support fr up () Bearing eccenter () MIDDLE SECTION 909 Belt 60SM Orange 808 Middle shaft bracket alu 90 Belt-tensioner shaft and nut 90 Middle shaft steel 9096 Pulley / flange 6T 9098 Pulley / flange 8T 909 Pulley / flange T 909 Pulley / flange T 9090 Pulley adaptor alu. () REAR SECTION 808 Pivot pin rear upper () 8098 Adjustable Nut Nylon (0) 807 Bearingblock sp R 7/966 V 808 Bearingblock sp L 7/966 V 907 Wheel-nut alu + O-ring () 908 Eccentric Nylon () 90 Pivot insert nylon (++) 90 Nylon inserts wheel-axles () 906 Driveshaft rear 6mm () 900 Engine monoblock M 909 Pulley solid axle T V 900 Pivot-balls 8.mm 7.7mm () 907 Upright 960 OS () 908 Wishbone rear upper () 909 Wishbone rear lower () 906 Track rod with hole mm () 9068 Wheelaxle RR OS () 9069 Lever alu/spring/pin RR OS () 907 Ball 6.8mm steel () 9079 Solid axle RR / clip 9090 Shim wheelaxle OS 8xxmm () 9006 Shim.x8x orange () 9007 Pivot pin.x66. Rear low () 9009 Suspension Bracket rear FR 906 Bearingblock 966 rear V 800 Bushings bearingblock l+r 7 / 966 V () 80 Bushings arb bearingblock l+r 7/966 V () 90 Eccenter 960 () 90 Suspension Bracket rear rr 90 Shocktower 966 rear 90 Uppersupension bracket FR Uppersupension bracket rr Sideplate bushing Belt 80SM0 Orange 909 Shim x8x0.mm () 969 Pulley adapter alu 9T 909 Antirollbar 966 RR,mm 90 Antirollbar spacer.mm () 90 Antirollbar ball,mm () BRAKE SYSTEM 908 Brake pulley T V 908 Brake pulley adaptor V 908 Brake cam Brake bushing () 90 Brake pully retainer Brake spring () 900 Brakeplate/pad set premounted 9096 Brake-cam / spring-set 90 Brake disk onepiece -SPEED GEARBOX 666 Springs / screws -speed 900 -speed gearbox LC (no shaft incl) 90 Drive-flange alu with OWB LC 90 Adaptor -speed LC 90 Clutch bell alu LC 906 -speed clutch shoes set LC 90 -speed gear T (nd) LC 90 -speed gear T (nd) LC 906 -speed gear 6T (nd) LC 907 -speed gear 7T (st) LC 908 -speed gear 8T (st) LC 909 -speed gear 9T (st) LC 9008 speed shaft sp shaft bushing 966 CLUTCH SYSTEM 77 Centax II thrust-bearing x0 60 Flywheel cone () 679 Centax flywheel 8mm 68 Centax clutch-nut 68 Centax pre-load adjusting nut 68 Centax spring cup 68 Centax thrust washer 699 Centax shim-set 7x (0) 90 Centax support-disk alu 90 Centax II revision-set 90 Spur gear-set /8 (7) 90 Gear pinion set Centax II 909 Centax- clutch-shoe red 9090 Centax II clutch-set (excl. Flywheel) 909 Centax II clutch-housing universal 909 Centax II bearing spacer x7 909 Centax II centrifugal shoes () 9096 Centax II spacer thrustbearing 9098 Centax II coilspring Centax x0 shim-set 0. () 0. () 909 Centax gear-pinion alu. T 9096 Centax gear-pinion alu. 6T 9097 Centax gear-pinion alu. 7T 9098 Centax gear-pinion alu. 8T 9099 Centax gear-pinion alu. 9T Centax gear-pinion alu. 0T ENGINE MOUNTS 0 Screw flanged allen Mx8 () 9 Mount alu exhaust wire 99 Exhaust mounting wire 900 Engine monoblock M

42 BALL-BEARINGS Ball-bearing x8 HS Ball-bearing x8 flanged HS Ball-bearing x0 HS 0 Ball-bearing 6x0 flanged HS Ball-bearing 6x0x HS () 0 Ball-bearing x HS () Ball-bearing 6x HS () 6 Ball-bearing x8 HS () 7 Ball-bearing x HS () 77 Thrustbearing x0 BODIES AND WINGS 60 Body clips (0) Optionals Pressure Nippleset tank Transpondermount carbon 6A Body post alu short () 687N Centax clutch shoe Yellow 909 Turnbuckle 6mm titanium () 906 Radioplate support 90/960 alu 900 Middle shaft bracket 90 Middle shaft alu coated 9070 Wheel-axles front QC-fixed set OS 9080 Wheel-axles front CV set OS 9070 Wheel-axles rear QC-fixed set OS 907 Anti-roll bar rear adjustable 909 Spacer anti-roll bar RR 9060 Eccentric bearing alu () 9089 Middle bracket/shaft-set alu Centering-set carbon rear body mount 909 Filler-plate carbon for chassis 909 Battery-plate closed carbon 9099 Centax fly-weights SPP () 900 Throttle-brake lever alu+bearings 909 Centax II clutch set Pro 906 Shock rod RCC short Ti-Ni () 907 Shock rod RCC long Ti-Ni () 90 Springwasher alu light () 90 Shim xx0. (0) 907 Anti-roll bar blade soft () 900 Shock spring support nylon ISL () 90 Battery holder brass 90 Disk brake ultra cool 90 Upgrade-set 960 OS RR 9088 Radioplate support alu & weight 9089 Weight radioplatesupport brass 0gr 909 Weight center brass gr 9098 Belt 80SM0 Low Friction 9099 Belt 60SM Low Friction 9000 Belt 60SM0 Low Friction 90 Shock RCC-X revision set 90 X-ring RCC-X Shock 906 Insert RCC-X shock () 907 Complete Antirollbar set RR () Antirolbar RR,mm Antirolbar RR,mm Antirolbar RR,8mm 90 Antirollbar Ball mm () 90 Antirollbar Ball,mm () 90 Antirollbar Spacer mm () 90 Antirollbar Spacer,mm () Central rear stifner complete 906 Screws for central rear stifner 908 Pulley alu 6T anodized 909 Pulley alu 8T anodized 900 Pulley alu T anodized 90 Upright 966 OS wide offset () 90 Decal sheet 966 chrome () link radiotray set link radiotray screw M-Mx8 () 907 Connectorset 966 (+) 9096 Anti-roll bar blade male 9097 Anti-roll bar blade female 909 Shim x8x0.mm () 9098 Wheel-axle washers conical OS () 909 Pulley / flange T 909 Pulley-adaptor alu light () 909 Pulley T alu hard-anodised 909 Q-C levers RR alu OS() 96 Lever alu quick-change () OS TOOLS 6 Tool front anti-roll bar 6 Tool pressure nipple / Centax nut 900 Tool RCC shocks 900 Tool nut-driver x00mm SPP Gear pinion wrench 9099 Clutch housing gripper Centax gap-tool alu MERCHANDISING 87 Rucksack Serpent (xcm) black 87 Rucksack Serpent (8x6cm) black 88 Banner Serpent S-logo xm nylon 907 T-shirt Serpent LTS orange (S) 908 T-shirt Serpent LTS orange (M) 909 T-shirt Serpent LTS orange (L) 900 T-shirt Serpent LTS orange (XL) 90 T-shirt Serpent LTS orange (XXL) 90 T-shirt Serpent DTR black (S) 90 T-shirt Serpent DTR black (M) 90 T-shirt Serpent DTR black (L) 90 T-shirt Serpent DTR black (XL) 906 T-shirt Serpent DTR black (XXL) 900 Sweater hooded Serpent black (S) 90 Sweater hooded Serpent black (M) 90 Sweater hooded Serpent black (L) 90 Sweater hooded Serpent black (XL) 90 Sweater hooded Serpent black (XXL) 998 Serpent Cap black/orange FASTENING MATERIALS 000 Screw allen countersunk mx0 (0) 00 Screw allen countersunk mx8 (0) 00 Screw allen countersunk mx0 (0) 00 Screw allen countersunk mx6 (0) 00 Screw allen countersunk mx0 (0) 00 Screw allen countersunk mx (0) 006 Screw allen fl. roundhead mx (0) 007 Screw allen countersunk mx6 (0) 008 Screw allen roundhead mx6 (0) 009 Screw allen roundhead mx0 (0) 00 Screw allen roundhead mx6 (0) 0 Screw allen roundhead mx (0) 0 Screw allen roundhead mx (0) 0 Screw allen roundhead mx8 (0) 0 Setscrew allen mx8 (0) 0 Setscrew allen mx (0) 06 Setscrew allen mx (0) 07 Setscrew allen mx (0) 08 Setscrew allen mx (0) 09 Setscrew allen mx6 (0) 00 Setscrew allen mx0 (0) 0 Setscrew allen mx6 (0) 0 Setscrew allen mx6 (0) 0 Screw ph roundhead.x (0) 000 Pin,x8 (0) 00 Pin x (0)

43 00 Pin x (0) 00 Pin x (0) 00 Pin x0 (0) 00 Pin x (0) 006 Pin.x (0) 007 Pin.x (0) 000 E-clip. (0) 00 E-clip. (0) 00 E-clip.0 (0) 00 E-clip.0 (0) 00 E-clip 7.0 (0) 00 Seger clip x.0 (0) 000 Washer 6.0x0 (0) 00 Washer.x7 (0) 00 Nut nylock M (0) 00 Nut nylock M (0) 66 Steel balls 6mm M () 67 Steel balls 6mm () 60 Balls 6mm/setscrews hex () 90 Screw set 966 (78) The above list may change without prior notice NEWS / NOTES

44 Serpent Model Racing Cars BV Spaarneweg E, EN, Cruquius The Netherlands, Europe #907 - Version

1/8TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL

1/8TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL /8TH SCALE WD COMPETITION CAR INSTRUCTION MANUAL INTRODUCTION The Serpent 960 is the next evolution of Serpent s hugely-successful 90 lineage, combining ultimate performance into a single package. The