INSTRUCTION MANUAL & REFERENCE GUIDE

Transcription

1 INSTRUCTION MANUAL & REFERENCE GUIDE

2 Welcome to Serpent The Serpent Cobra E-truggy is based on the successfull Cobra offroad platform. It is designed to be a world champion, while still being easy to use, assemble, and set up. You are now part of the worldwide network of Serpent drivers. The Serpent Cobra offers state of the art specifications and leads the way in /8 scale offroad chassis design, using all the knowledge our designers have gathered from racing offroad cars for over 5 years, into this design too. Continuously pushing the performance envelope, Serpent s engineers have added many new and innovative features that help take your Serpent Cobra into the winner s circle. Designed, tested and raced by Billy Easton, USA. World Champion. INSTRUCTIONS Serpent s long tradition of excellence extends to the instruction manuals, and this instruction manual is no exception. The easy-to-follow layout is richly illustrated with 3D-rendered full-color images to make your building experience quick and easy. Following the instructions will result in a well-built, high-performance race-car that will soon be able to unleash its full potential at the racetrack. This instruction manual has been divided into sections that will logically lead you through the assembly process of your Serpent Cobra. Follow the assembly steps in the order presented to ensure that no problems occur during assembly. Each step indicates all the fasteners, bearings and small parts used. Bag numbers identify the kit bag(s) that contains the appropriate parts. SAFETY Read and take note of the Read this First section before proceeding to assemble the car-kit. This car-kit is intended for persons aged 6 or older. CUSTOMER SERVICE Serpent has made a strong effort to make this manual as complete and clear as possible. Additional info may be published in our website: or you may ask your dealer or the Serpent distributor for advice, or Serpent direct: info@serpent.com The Serpent Facebook, Twitter and Youtube pages give additional means of support and communications. INSTRUCTIONS, HOW TO USE The kit includes bags, with bagnumbers, which refer to the same step in the manual. Open only the indicated bag(s) per step and finish that part of the assembly. Remaining parts will be needed lateron in the assembly process. EXPLODED VIEWS AND PARTS LIST The exploded views and parts lists for the Serpent Cobra are included in the back of this manual. The exploded views show all the parts of a particular assembly step along with the Serpent part number. The parts lists indicate the part number and name of each part for easy reference when ordering. The instruction manual is very complete, though due to continuous product development, more up-to-date information may be provided at our Serpent.com website. All information about the Serpent Cobra is accessible from the Serpent product page which can be found on Serpent.com and can be accessed by simply typing serpent.com/ into your web browsers address bar. From the Serpent product page you will find the very latest information about your Serpent Cobra: reports by team drivers and other experts, tips and tricks, setups, image gallery and downloadable files including the latest version of the instruction manual will be made available as downloadable PDF-files. Enjoy racing! Team Serpent SETUP In many assembly steps you mount specific parts that suit the default set-up. We advice to keep the seperate default set-up sheet alongside the manual, during all assembly. Other finetuning of the set-up, must be done at the track. CONTENTS DIFFERENTIAL CENTER ASSEMBLY 4 DIFFERENTAIL FR/RR ASSEMBLY 5 CENTER ASSEMBLY 6 REAR ASSEMBLY 7 FRONT ASSEMBLY STEERING ASSEMBLY 5 SIDE-GUARD/RADIO ASSEMBLY 8 SHOCKS ASSEMBLY 0 SHOCK MOUNTING FINAL ASSEMBLY 3 REFERENCE GUIDE 5 PARTS LISTS 3

3 - This is a highly technical hobby product, intended to be used in a safe racing environment. This car is capable of speeds in excess of 80 km/h or 50mph. Please follow these guidelines when building and operating this model. - Parental guidance is required when the builder/user of this car is under 6. - Follow the building instructions. If in doubt, contact your dealer or importer. - Be sure to use the proper tools when assembling the car. Always exercise caution when using electric tools, knives and other sharp objects. - Be careful when using liquids like lubrication oil, fuel or glue. Do not swallow. - Follow the manufacturer s instruction in case you experience irritation after using the product. - Be careful when operating the car. Stay away from any rotating parts such as wheels, gears and transmission. Stay away from motor, engine and exhaust pipe system or speedo during and immediately after use, as these parts may be very hot. We advise to use protective hand cloves. - Only operate this car in a safe environment, like a special racing track or a closed parking lot. Avoid using this car on public roads, crowded places or near infants. - Before operating this car, always check the mechanical status of the car. Also check that the transmitter and receiver frequencies correspond and are not used by any other racer at the same time. Check that the batteries of the transmitter and receiver are fully charged. - After use, always check all the mechanics of the car. We advise to clean the car immediately after use, and inspect the parts for wear or fractures. Replace when necessary. Do not use water, methanol, thinner or other solvents to clean the car. - Empty the fuel tank (depending on model) if needed and disconnect the receiver battery. - Store the car in a dry and heated place to avoid corrosion of metal parts. - Avoid using this car in wet conditions as the water will cause corrosion on the metal parts and bearings and these parts will cease to function properly. If driven in the wet, ensure that all the electric equipment is waterproofed and after use, that all moving parts are dried immediately. USING THE MANUAL Each step contains a variety of numbers, lines, and symbols. The numbers represent the order in which the parts should be assembled. The lines and symbols are described below. Step number; the order in which you should assemble the indicated parts Length after assembly Assembly path of one item into another Group of items (within lines) should be assembled first Direction the item should be moved Glue one item to another Press/Insert one item into another Connect one item to another Gap between two items Apply graphite grease (Grey), Apply silicone grease (Orange), Apply threadlock (Blue), Apply silicone oil,

4 CENTER DIFF BAG. DIFFERENTIAL CENTER ASSEMBLY 8x6x5 Use some grease during assembly. 8x6x5 Use silicone oil to hold seal in position Add mm oil before assembling the gear Use some grease during assembly.3.4 M3x Silicone oil fill just over gear shaft. Page 4 Check default SET-UP sheet for CST value of the silicone oil.

5 . DIFFERENTIAL FRONT/REAR ASSEMBLY Use some grease during assembly FR/RR DIFF BAG 8x4x4 Flanged. Use some grease during assembly 8x4x4 Flanged Use silicone oil to hold seal in position Add mm oil before assembling the gear.3.4 M3x Silicone oil fill just over gear shaft. Page 5 Check default SET-UP sheet for CST value of the silicone oil.

6 6 3 CENTER ASSEMBLY Bag M4X0 4 M3X8

7 7 REAR ASSEMBLY x9x4 M5X4 8x9x6 8xx0. Bag 5.5X3 6 8xx Nylock nut M3.5X5 WIDE THREAD Use 4x5.6x0. shims to adjust proper gear mesh (shims included in the diff bag). Notice orientation of the diff. M3X8 7 M3X4 M3X6

8 M4x Special M3x40 Proper insert orientation in the REAR bracket, left and right equal type Proper insert orientation in the FRONT bracket, left and right equal type 9 M3x8 Nylock nut M3 Nylock nut M3 Bag 3 M3x8 M3x0 M3x5 3 M3x8 M3x0

9 0 M3x Flanged M3x6 56.5mm. Bag 4.5x7 6 8x6x5 3 5xx4.5x5 Move clips over pin after assembling M3x4 M5x Nylock nut M3 3 M3x Page 9 Nylock nut M3

10 0 M3x3 M3x3 M3x3 M3x3 Use threadlock on these screws 35mm 3 M4x

11 FRONT ASSEMBLY M5x4 8xx0. Bag 5 3x9x4 3.5x3 8x9x6 8xx x5 WIDE THREAD Use 4x5.6x0. shims to adjust proper gear mesh (shims included in the diff bag). Notice orientation of the diff. 6 Nylock nut M3 M3x8 M3x0 M3x6 Cilinder Head 7 M3x4 Page M3x6

12 8 5 M4x Special 3 4 M3x6 Proper insert orientation in the rear bracket Proper insert orientation in the front bracket 9 M3x Flanged 6.5mm

13 3 0.5x7 8x6x5 6 5xx4 3 M3x4.5x5 M5x4 5 4 Move clips over pin after assembling NOTE: C-hubs show L or R indication M3x6 M3x6 Left hand side 3

14 4 M3x Nylock nut M3 M4x8 SPECIAL 3 M3x3 M3x3 M3x3 M3x3 Use threadlock on these screws 35mm

15 5 4 M4x M4x4 STEERING ASSEMBLY 5 Bag 7 M4x0 M4x0 M4x0

16 6 4mm Nylock nut M3 M3x8 7 M3x8 M3x8 M3x8 64.5mm 8 6x0x3 6x0x3 6x0x3 Nylock M3 Page 6 Nylock M3

17 7 9 M3x0 M3x0 M3x6 30 Nylock nut M3 Nylock nut M3 M3x 3 M3x

18 8 SIDE-GUARD / RADIO ASSEMBLY 3 Bag 8 M3x3 3 3 M3x8 M4x0 M3x8 M3x8 M4x0 M4x0 M4x0 M3x8

19 Mx0 Mx0 M3x6 3.3 Use enough servo-spacers to allow servolever to clear radiobox by 0.5 to.0 mm (see step 3.3) NOT INCLUDED M3x6 NOT INCLUDED M3x3 NOT INCLUDED Tip: Use double sided tape to mount the ESC and Transponder. NOT INCLUDED M3x Use the following servo inserts with this brand of servos: 3 Sanwa / KO / JR 4 Hitec 5 Futaba / Hitec / Savox M3x8 Nut M3 Tip: Note orientation of the servolever M3x4 34 Nylock nut M3 Page 9 M4x0

20 SHOCK ASSEMBLY Use threadlock Bag 9 RR 35. Nut M3 Apply silcione oil to assemble the o-rings Bag 0 FR 35.3 Apply silcione oil to assemble the shockshaft 35.4 Apply silcione oil to mount the nut REAR shock 4mm FRONT shock 3.5mm

21 35.7 Push membrane into the shock top Fill up with sillicone oil - Wait for air bubbles to escape - Close top only 3/4 - Check default SET-UP sheet for CST value of silicone oil 35.9

22 SHOCK MOUNTING 35 M3x8 M3x8 M3x3 M3x3 NOTE: SHOKS SHOWN WITHOUT SHOCKS BOOTS 36 NOTE: SHOKS SHOWN WITHOUT SHOCKS BOOTS M3x8 M3x8 M3x3 Page M3x3

23 3 FINAL ASSEMBLY 37 Bag M4x0 NOT INCLUDED 3 M4x4 M4x0 38 M3x5 Nylock nut M3

24 4 39 NOT INCLUDED NOT INCLUDED FOAM 40 BODYSHELL: ) Apply the masking sheet provided and paint the body on the inside. ) Cut the body along the provided cuttinglines on the body for a perfect holes. on the outside of the body. 4) Apply the provided Serpent and Cobra decals, and mount the body on the bodyposts, with the provided bodyclips. WHEELS AND TYRES NOT INCLUDED

25 REF GUIDE: EXPLODED VIEWS and PARTS-LIST Contents Page 5 DIFFERENTAL ASSEMBLIES 6 TRANSMISSION CENTER 6 REAR ASSEMBLY 7 FRONT ASSEMBLY 8 STEERING ASSEMBLY 9 RADIO ASSEMBLY 9 SHOCK ASSEMBLY 30 FINAL ASSEMBLY I 30 PARTS-LIST 3

26 DIFFERENTIAL ASSEMBLIES CENTER Complete FR/RR Diff Complete CENTER Diff 50T Complete DIFF UNI FRONT REAR TRANSMISSION CENTER Page 6 0

27 REAR ASSEMBLY

28 FRONT ASSEMBLY

29 STEERING ASSEMBLY RADIO ASSEMBLY

30 SHOCK ASSEMBLY Front Rear Front SHOCK SPRINGS 6005 Spring set RR pink.8lbs () Spring set RR blue 3.0lbs () Spring set RR purple 3.lbs () Spring set RR green 3.4lbs () Spring set RR grey 3.6lbs () Spring set RR yellow 3.8lbs () Spring set RR white 4.0lbs () Spring set RR (7x) Spring set FR S8T (7x) Spring set FR Pink 4.8lbs () Spring set FR Blue 5.0 lbs () Spring set FR Purple 5. lbs () Spring set FR Green 5.4 lbs () Spring set FR Gray 5.6 lbs () Spring set FR Yellow 5.8 lbs () Spring set FR White 6.0 lbs () Rear FINAL ASSEMBLY Page

31 Serpent 8 Cobra-T Truggy /8 4wd TE Decals 887 Decal Serpent black/white /8 () 889 Decal Serpent chrome /8 () Decal sheet S8 chrome () Decal sheet S8 Truggy black and white () 606 Antenna rod black () 6003 Balljoint set (9) Steering balljoint + lever 8-E Battery foam pad () Pivotball double straight (3) Servo spacers (8) Battery radiobox 8-T-e S8E Radiotray set light alu/carbon S8E batterystrap carbon () O-ring servosaver nut (4) 6008 Servo saver set nylon (3) 6003 Balljoint set (9) Topdeck front carbon Steeringrack mount Servosaver adjust nut Servosaver shaft outer Steeringrack option Bolt steeringrack () 6009 Pivotball 6mm steering (4) Servosaver post () Servo saver spring hard Spacer steering post () Steering balljoint + lever 8-E Pivotball double straight (3) Servo spacers (8) Servosaver spring 6007 Steeringrack option 6007 Steeringrack option Servo saver post alu () Servosaver alu coated (3) Servo lever 3T 8-E alu Servo lever 4T 8-E alu Servo lever 5T 8-E alu 600 Shock membrane (0) 600 O-ring shock bottom (0) 6003 O-ring shock nut (0) 6008 Shock part frame nylon (0) Shock pistons (4x4) Adjust nut shock / oring () Shock top alu () Shock mount () Washer shock shaft (4) Pivotball 6.75 double (4) Shock cartridge stepped (4) Shock cartridge (4) Shock revision set (0) Shock body coated FR Truggy () Shock body coated RR Truggy () Shock boot Truggy (4) Shockset FR Truggy () Shockset RR Truggy () Shockshaft FR Truggy () PARTS-LIST Shockshaft RR Truggy () 6008 Shock bushing delrin (4) Shock spring support alu (4) Shock top 7075 hard anodized () Shock pistons conical 6 hole (4) Shock pistons conical 8 hole (4) Shock pistons conical 0 hole (4) Membrane webbed silicone (4) Shock shaft FR Truggy TiNi coating () Shock shaft RR Truggy TiNi coating () Bolt shock titanium (4) Shock pistons 8 hole (4) 6005 Spring set RR pink.8lbs () Spring set RR blue 3.0lbs () Spring set RR purple 3.lbs () Spring set RR green 3.4lbs () Spring set RR grey 3.6lbs () Spring set RR yellow 3.8lbs () Spring set RR white 4,0lbs () Spring set RR (7x) Spring set FR (7x) Spring set FR Pink 4,8lbs () Spring set FR Blue 5.0 lbs () Spring set FR Purple 5. lbs () Spring set FR Green 5,4 lbs () Spring set FR Gray 5,6 lbs () Spring set FR Yellow 5.8 lbs () Spring set FR White 6.0 lbs () 6004 Bumper Chassisplate alu 8-T-e Battery radiobox 8-T-e Chassis Brace Fr/Rr 8-T-e Chassisplate alu hardcoated 8-T-e Chassis brace front alu 8-E Hingepin () 6006 Washer/nut nylon M3 (+5) 6009 Diff case front set 6003 Balljoint set (9) 6003 Suspension bracket inserts (30) Topdeck front carbon Steeringrack mount Camberlink pivotball (4) Antirollbar nut () Suspension bracket alu FR RR std Suspension bracket alu FR FR std Shim conical M3x7.5x (0) 6008 Bolt steeringrack () Bushing suspensionarm (4) Pivotball 7.5 double (4) Pin steeringblock (4) 6009 Pivotball antirollbar () Pivotball threaded antirollbar () Driveshaft insert () 600 Wheelnut 7mm (4) 6004 Bolt shock (4) 6005 Droop screw (4) 6006 Socket screw M3x8 (6) Washer M3 alu () Special screw fr whisbone (4) Gear coupler steel v

32 C-Hub Truggy L+R Driveshaft Truggy () Gear coupler rubber boot () Hex adaptor clip () Shocktower Truggy front carbon 6004 Track rod M4x9 () Track rod M5x9 () Wheelhexagon Truggy + clip (4) 6004 Wishbone front L+R Antiroll bar front truggy,3mm Wheelaxle FR V () Steeringblock L+R V Driveshaft center FR 8-T-e Chassis Brace Fr/Rr 8-T-e Bodymount Fr/Rr 8-T-e Antirollbar Spacer 3mm () Shock mount titanium () Lightwheight wheel nut 7mm (4) C-hub Truggy 4 L+R alu Shocktower Truggy FR alu light Track rod M4x9 titanium () Track rod M5x9 titanium () Wheelhexagon truggy +mm () Wheelhexagon truggy +mm () Antiroll bar front truggy,mm Antiroll bar front truggy,5mm Chassis brace front alu 8-E Wheelaxle FR alu V () Antirollbar spacer alu () Pivotball anti roll bar alu () Bushing suspension arm fr alu (4) Bolt shock titanium (4) Hingepin TiN coated () Steeringblock L+R V alu + delrin sleeve Shim 8xx0. (0) O-ring Hex adapter (0) Bushing delrin for 8 alu caster block (4) 6000 Wheelaxle clip (4) 6003 Balljoint set (9) Driveshaft insert () Gear coupler rubber boot () Snap ring for coupler () Spurgear 50T Center diff cover 8-E Motormount set 8-E Motor slider 8-E Gear coupler V Gear coupler sleeve () Coupler RR 8-T V Driveshaft center RR 8-T-e Driveshaft center FR 8-T-e Motor screw washer S8E () Spur gear 46T Spur gear 48T Spur gear 5T Spurgear 46T composite Spurgear 48T composite Spurgear 50T composite Hingepin () 6006 Washer/nut nylon M3 (+5) Diff case rear set 6003 Balljoint set (9) 6003 Suspension bracket inserts (30) Wing mount set Suspension bracket RR RR Suspension bracket RR FR Camberlink pivotball (4) Antirollbar nut () Shim conical M3x7.5x (0) Pivotball 7.5 double (4) Hingepin RR outer () 6009 Pivotball antirollbar () Pivotball threaded antirollbar () Driveshaft insert () Bolt transmission brace rear () 600 Wheelnut 7mm (4) 6004 Bolt shock (4) 6005 Droop screw (4) Antiroll bar rear.3mm 6006 Socket screw M3x8 (6) Spacers,5mm +,5mm for wheelbase (4+) Bodymount Truggy FR+RR Gear coupler rubber boot () Hex adaptor clip () Snap ring for coupler () Track rod M5x86 () Wheelhexagon Truggy + clip (4) Wishbone Truggy rear L+R Wheelaxle RR V () Wheelaxle boot RR () Driveshaft rear 8-T V () Coupler RR 8-T V Upright Truggy L+R V Driveshaft center RR 8-T-e Shocktower carbon RR 8-T-e Chassis Brace Fr/Rr 8-T-e Bodymount Fr/Rr 8-T-e Antirollbar Spacer 3mm () Antiroll bar rear.5mm Antiroll bar rear.7mm Washer M3 alu () Wheelaxle alu () Suspension bracket RR FR Suspension bracket RR RR HR Suspension bracket RR RR LR Shock mount titanium () Lightwheight wheel nut 7mm (4) Post wingmount alu () Wing washer alu () Suspension bracket RR FR Antiroll bar rear.8mm Antiroll bar rear.0mm Track rod M5x86 titanium () Wheelhexagon truggy +mm () Wheelhexagon truggy +mm () Antiroll bar rear,4mm Antirollbar spacer alu () Pivotball anti roll bar alu () Bolt shock titanium (4) Transmision brace tube alu Hingepin TiN coated () Hingepin rr outer TiN coated () Shim 8xx0. (0) Shocktower alu light RR 8-T-e Antiroll bar rear 3.0mm O-ring Hex adapter (0) Diff gasket (3) Diff outdrive () Shim 3x6x0. (0)

33 Diff pin 0T () 6000 Diff pin outdrive () 6003 Shim 6x.75x0. (0) 6004 Shim 3.5xx0. (0) 6005 Shim 8xx0. (0) Shim 4x5.5x 0.65 (4) Shim 4x5.5x0. (0) Diff Center 50T Diff outdrive center () Spurgear 50T 6004 Oring centerdiff V (0) Diff housing V Shim 8xx0. (0) Diff gear 0T + 0T (4+) V Diff pinion 0T spiral Diff gear 43T spiral Diff pin 0T alu () Spur gear 46T Spur gear 48T Spur gear 5T Diff gear 44T Diff pinion 3T Spurgear 46T composite Spurgear 48T composite Spurgear 50T composite 667 Body-clip medium (0) Wing mount set Wing white low Body-truggy 8-T-e with mask Wing white nylon Wing black nylon Wing black low Wing mount set low Pinion T Pinion 3T Pinion 4T Pinion 5T Pinion 6T Pinion 7T Pinion 8T Pinion 9T Pinion 0T 3 Ballbearing 6x0x3 SS () 337 Ballbearing 5xx4 SS () 393 Ballbearing 3X9X4 SS () 395 Ballbearing 8x9x6 SS () 396 Ballbearing 8x6x5 SS () Bearingset 8-E (6) Bearingset 8 V (6) Bearingset 8 V small () TOOLS Toolset for onroad (7pcs) with tools bag Toolset for ep (6pcs) with tools bag Toolset for offroad (0pcs) with tools bag Allen wrench.5 x 0mm 9050 Allen wrench.0 x 0mm 905 Allen wrench.5 x 0mm 905 Allen wrench 3.0 x 0mm 9053 Ball driver hex wrench.0 x 0mm 9054 Ball driver hex wrench.5 x 0mm 9055 Ball driver hex wrench 3.0 x 0mm 9056 Tool tip allen wrench.5 x 0mm 9057 Tool tip allen wrench.0 x 0mm 9058 Tool tip allen wrench.5 x 0mm 9059 Tool tip allen wrench 3.0 x 0mm 9050 Tool tip ball driver hex wrench.0 x 0mm 905 Tool tip ball driver hex wrench.5 x 0mm 905 Tool tip ball driver hex wrench 3.0 x 0mm 9053 Turnbuckle wrench 3mm 9054 Turnbuckle wrench 4mm 9055 Turnbuckle wrench 5mm 9056 Flat head screwdriver 3.0 x 50mm 9057 Flat head screwdriver 4.0 x 50mm 9058 Phillips screwdriver.0 x 45mm 9059 Phillips screwdriver 3.5 x 0mm Phillips screwdriver 5.8 x 0mm Nut driver 4.5 x 00mm 9053 Nut driver 5.0 x 00mm 9053 Nut driver 5.5 x 00mm Nut driver 7.0 x 00mm Reamer with end cap for lexan body 00 Screw allen countersunk m4x8 (0) 00 Screw allen countersunk m4x0 (0) 003 Screw allen countersunk m4x6 (0) 004 Screw allen countersunk m3x8 (0) 005 Screw allen countersunk m4x (0) 007 Screw allen cilinderhead m3x6 (0) 008 Screw allen roundhead m3x6 (0) 009 Screw allen roundhead m3x0 (0) 00 Screw allen roundhead m3x6 (0) 0 Screw allen roundhead m3x4 (0) 0 Screw allen roundhead m3x (0) 03 Screw allen roundhead m4x8 (0) 04 Setscrew allen m3x8 (0) 05 Setscrew allen m3x4 (0) 06 Setscrew allen m3x3 (0) 07 Setscrew allen m3x (0) 08 Setscrew allen m4x4 (0) 09 Setscrew allen m4x6 (0) 00 Setscrew allen m4x0 (0) 0 Setscrew allen m5x6 (0) 0 Screw allen countersunk m3x6 (0) 03 Screw philips roundhead 3.5x3 (0) 04 Screw allen roundhead m3x8 (0) 05 Screw allen countersunk m3x0 (0) 06 Screw allen countersunk m.5x (0) 07 Screw allen countersunk m3x (0) 08 Screw allen roundhead m3x5 (0) 09 Screw allen cilinderhead m3x0 (0) 030 Screw allen roundhead m.5x6 (0) 03 Screw allen roundhead m.5x0 (0) 03 Screw allen countersunk m3x6 (0) 033 Screw philipshead countersunk.5x8 wide (0) 034 Screw philipshead countersunk.5x0 wide (0) 035 Screw allen countersunk M.5x0 (0) 036 Screw allen countersunk M.5x8 (0) 037 Setscrew allen M3x6 (0) 038 Screw allen countersunk M4x4 (0) 039 Screw allen countersunk M3x40 (0) 040 Screw allen roundhead M3x0 (0) 04 Screw allen roundhead M3x (0) 04 Screw allen roundhead M3x5 (0) 043 Screw allen roundhead M4x8 (0) 044 Screw allen roundhead M3x8 (0)

34 34 z9084 T-shirt Serpent Splash white (L) 9085 T-shirt Serpent Splash white (XL) 9086 T-shirt Serpent Splash white (XXL) 9087 T-shirt Serpent Splash white (XXXL) 9088 T-shirt Serpent Splash orange (S) 9089 T-shirt Serpent Splash orange (M) 9090 T-shirt Serpent Splash orange (L) 909 T-shirt Serpent Splash orange (XL) 909 T-shirt Serpent Splash orange (XXL) 9093 T-shirt Serpent Splash orange (XXXL) 9094 T-shirt Serpent Splash black (S) 9095 T-shirt Serpent Splash black (M) 9096 T-shirt Serpent Splash black (L) 9097 T-shirt Serpent Splash black (XL) 9098 T-shirt Serpent Splash black (XXL) 9099 T-shirt Serpent Splash black (XXXL) 900 Hoody sweater Serpent black-zip (S) 900 Hoody sweater Serpent black-zip (M) 9003 Hoody sweater Serpent black-zip (L) 9004 Hoody sweater Serpent black-zip (XL) 9005 Hoody sweater Serpent black-zip (XL) 9006 Hoody sweater Serpent black-zip (3XL) 9007 Hoody sweater Serpent black-zip (4XL) ) 905 T-shirt Serpent WC edition black (S) 906 T-shirt Serpent WC edition black (M) 907 T-shirt Serpent WC edition black (L) 908 T-shirt Serpent WC edition black (XL) 909 T-shirt Serpent WC edition black (XXL) 900 T-shirt Serpent WC edition black (XXXL) 9050 Pit-bag medium. 3 drawers

35 35 NEWS / NOTES

36 - info@serpent.com #843- S8T-e Manual version