INSTRUCTION MANUAL & REFERENCE GUIDE

Size: px
Start display at page:

Download "INSTRUCTION MANUAL & REFERENCE GUIDE"

Transcription

1 INSTRUCTION MANUAL & REFERENCE GUIDE

2 Welcome to Serpent The Serpent Viper 977e is based on the successful 977 Viper gaspowered car, combining ultimate performance into a single package. The 65mm wide electric powered racing car offers superb handling, incredible accelleration and top-speed. Breath taking! The Serpent Viper 977e is designed to be a world champion, while still being easy to use, assemble, and set up. You are now part of the worldwide network of Serpent drivers, which gives you superior technical support and access to many benefits that only Serpent drivers can enjoy. The Serpent Viper 977e offers state of the art specifications and leads the way in chassis design, using all the knowledge we have from /8 scale racing into this design too. Continuously pushing the performance envelope, Serpent s engineers have added many new and innovative features that can help take your Serpent Viper 977e into the winner s circle. INSTRUCTIONS Serpent s long tradition of excellence extends to their instruction manuals, and this instruction manual is no exception. The easy-to-follow layout is richly illustrated with 3D-rendered full-color images to make your building experience quick and easy. Following the instructions will result in a well-built, high-performance racecar that will soon be able to unleash its full potential at the racetrack. This instruction manual has been divided into sections that will logically lead you through the assembly process of your Safety Read and take note of the Read this First section before proceeding to assemble the car-kit. This car-kit is intended for persons aged 6 or older. Customer service Serpent has made a strong effort to make this manual as complete and clear as possible. Additional info may be published in our website: or you may ask your dealer or the Serpent distributor for advice, or Serpent direct: info@ serpent.com The Serpent Facebook, Twitter and Youtube pages give additional means of support and communications. Instructions, how to use The kit includes bags, with bagnumbers, which refer to the same step in the manual. Open only the indicated bag(s) per step and finish that part of the assembly. Remaining parts will be needed lateron in Serpent model. Follow the assembly steps in the order presented to ensure that no problems occur during assembly. Each step indicates all the fasteners and small parts used. Bag numbers identify the kit bag(s) that contains the appropriate parts. EXPLODED VIEWS AND PARTS LIST The exploded views and parts lists for the Serpent Viper 977e are included in the back of this manual. The exploded views show all the parts of a particular assembly step along with the Serpent part number. The parts lists indicate the part number and name of each part for easy reference when ordering. The instruction manual included with your Serpent Viper 977e kit is very complete, though due to continuous product development, more up-to-date information may be provided at our Serpent.com website. All information about the Serpent Viper 977e is accessible from the Serpent 977-e product page which can be found on Serpent.com and can be accessed by simply typing into your web browsers address bar. From the Serpent Viper 977e product page you will find the very latest information about your Serpent Viper 977e: reports by team drivers and other experts, tips and tricks, setups, image gallery and downloadable files including the latest version of the instruction manual will be made available as downloadable PDF-files. Enjoy racing! Team Serpent the assembly process. SetUp In many assembly steps you mount specific parts that suit the default set-up. We advice to keep the seperate default set-up sheet alongside the manual, during all assembly. Other finetuning of the set-up, must be done at the track. CONTENTS TRANSMISSION ASSEMBLY 4 REAR ASSEMBLY 8 STEERING & FRONT ASSEMBLY SHOCKS ASSEMBLY 7 FINAL ASSEMBLy 8 REFERENCE GUIDE PARTS LISTS 9

3 Read this first! - This is a highly technical hobby product, intended to be used in a safe racing environment. This car is capable of speeds in excess of 80 km/h or 50mph. Please follow these guidelines when building and operating this model. - Parental guidance is required when the builder/user of this car is under 6. - Follow the building instructions. If in doubt, contact your dealer or importer. - Be sure to use the proper tools when assembling the car. Always exercise caution when using electric tools, knives and other sharp objects. - Be careful when using liquids like lubrication oil, fuel or glue. Do not swallow. - Follow the manufacturer s instruction in case you experience irritation after using the product. - Be careful when operating the car. Stay away from any rotating parts such as wheels, gears and transmission. Stay away from motor, engine and exhaust pipe system or speedo during and immediately after use, as these parts may be very hot. We advise to use protective hand cloves. - Only operate this car in a safe environment, like a special racing track or a closed parking lot. Avoid using this car on public roads, crowded places or near infants. - Before operating this car, always check the mechanical status of the car. Also check that the transmitter and receiver frequencies correspond and are not used by any other racer at the same time. Check that the batteries of the transmitter and receiver are fully charged. - After use, always check all the mechanics of the car. We advise to clean the car immediately after use, and inspect the parts for wear or fractures. Replace when necessary. Do not use water, methanol, thinner or other solvents to clean the car. - Empty the fuel tank (depending on model) if needed and disconnect the receiver battery. - Store the car in a dry and heated place to avoid corrosion of metal parts. - Avoid using this car in wet conditions as the water will cause corrosion on the metal parts and bearings and these parts will cease to function properly. If driven in the wet, ensure that all the electric equipment is waterproofed and after use, that all moving parts are dried immediately. USING THE MANUAL Each step contains a variety of numbers, lines, and symbols. The numbers represent the order in which the parts should be assembled. The lines and symbols are described below. Step number; the order in which you should assemble the indicated parts Length after assembly Assembly path of one item into another Group of items (within lines) should be assembled first Direction the item should be moved Glue one item to another Press/Insert one item into another Connect one item to another Gap between two items Apply graphite grease (Grey), Apply silicone grease (Orange), Apply threadlock (Blue), Apply silicone oil,

4 4 TRANSMISSION ASSEMBLY.5x R Bag 3 R 3 M4X0 3 x8x4 x8x Note: Assemble M3x0 screws to aling the camber bracket. Remove them again after M3x6 are mounted, so you can proceed with step 4.. M3x6 M3x0

5 5 4. M3x6 M3x0 Note orientation of the excenters 5 Bag M4x0 M4x0 6 5x8x.5 Flanged 3 M3x0 5x8x.5 M3x4 M4x M.5x8

6 7. M3x M3x x8x4 x8x4 8 5x0x3 Bag 3 M3X0 M4X6 5x0x3 M3X8 9 Note position of the M4x8 setscrew. M4X8 3 M3X0 3 M3X0 Page 6 M4X0 M4X0

7 0 M.5x8 4 M3X6 3 6xx4 3 6xx4 M3X6 M4X0 M4X0 How to disassemble the midshaft: ) Remove the screw of inner shaft. ) Remove the M3x6 screw and the carbon bracket. 3) Remove the inner midshaft 4) Take out the midshaft 4 3 Page 7 M3X6

8 8 Detail view of the 977e Viper Two Belts Transmission REAR ASSEMBLY Bag 4 Note position of the insterts M3X M4X0 M3X6 M3X8 M3X8 3. M3X5 mm mm M4X0

9 x8x x8x4 x5x0.5 x8x4 4. M3X4 3x mm 5 4 3mm mm 5. M3x0 M3x8

10 mm x8x.5 7. M3x3 M3x3 M3x3 M3x3

11 8 STEERING & FRONT ASSEMBLY M3x6 M3x8 Bag 5 M3x6 M3x6 Nylock nut M3 mm 9 Use the following servo horns with this brand of servos: 3 - Sanwa / KO/ JR 4 - Hitec 5 - Futaba / Hitec/ Savox M3x6 M3x6 Flanged M3x6 M3x6 Flanged NOT INCLUDED Nylock nut M3 0 M3x0 M3x0

12 .. 6x0x3 0 mm 6x0x3 M4x0 M3x0 M4x8 M3x6 M3x6 M3x8 M3x8. M3x6 Page M3x8

13 3. M5x0 6mm 8mm mm mm M4x M4x 3 M4x4 M4x4 4x9x 4x9x 4 Bag 6 4mm M4x4 mm mm

14 x7x0.5 Nylock nut M3 M3x Leading position when mounted at LEFT hand side OPTIONAL Trailing position when mounted at LEFT hand side Neutral position OPTIONAL Leading position when mounted at RIGHT hand side Trailing position when mounted at RIGHT hand side x x5x0.5 x8 3x0 M3x4 x8x0.3 x5x0.5 4 pcs x8 3

15 5.3 LEFT M3x8 M3x6 5.4 RIGHT M3x6 M3x mm Page 5 5mm

16 mm x8x.5 8. M3x3 M3x3 M3x3

17 7 9 Shocks Bag Use some oil during assembly SHOCKS ASSEMBLY Assemble the spring-nut Use some Locktite to fix the nut Insert the o-ring inside the springnut Nut M.5 Check the default set-up sheet for the correct piston to use.5x6x0.5 FRONT SHOCKS REAR SHOCKS Use some oil during assembly Use some oil during assembly 0.5mm.0mm FRONT = SHORT BALLJOINT REAR= LONG BALLJOINT FILLING Fill the shock body with the supplied shock absorber oil. Assemble the spring and springcup to complete the shock Check the default set-up sheet for spring details. BLEEDING Let the oil settle and allow the air to escape. Slowly move the piston up and down to release any trapped air bubbles. Repeat as necessary until no bubbles appear.

18 8 FINAL ASSEMBLY 30 Bag 7 M4x0 M4x0 Nylock nuts M4 M4x M4x4 3 M3x6 M3x M3x M3x M3x 4 M3x M3x M3x

19 9 33 M3x6 Flanged M3x0 M3x6 Flanged 34 3 M3x4 M3x4 M3x6 M3x Bag 8 M3x6

20 0 36 NOT INCLUDED Note: Order for assembling the electric motor correctly. ) Assemble the motor with x M4x0 CH screws. ) Assemble the pinion with M4x4 grubscrew. 3) Assemble the M3x6 screw. M4x4 M4x0 3 M3x6 Note: To assemble the motor the slide must be completely backwards. The rear M3x6 screw must be disassembled. 37 M3x4 M3x4 NOT INCLUDED M.5x8 M4x8

21 NOT INCLUDED NOT INCLUDED Tip: Use double sided tape to mount the ESC and the RX to the chassis. M3x5 38 M4x8 M3x0 M4x8 39 NOT INCLUDED NOT INCLUDED Tip: we suggest to use glasstape to fasten the batteries in the side-holders provided or suitable velcro straps

22 40 REF GUIDE: EXPLODED VIEWS and PARTS-LIST Contents TRANSMISSION ASSEMBLY REAR ASSEMBLY 3 STEERING ASSEMBLY 4 FRONT ASSEMBLy 5 SHOCKS ASSEMBLY 6 FINAL ASSEMBLY I 7 FINAL ASSEMBLY II 8 Page PARTS-LIST 9

23 TRANSMISSION ASSEMBLY T T T

24 3 REAR ASSEMBLY

25 4 STEERING ASSEMBLY

26 5 FRONT ASSEMBLY

27 6 SHOCKS ASSEMBLY Spring white L3 (.3/3) () 6030 Spring yellow L3 (.8/6) () 6030 Spring orange L3 (3.4/9.5) () Spring red L3 (4./3.5) () Spring pink L3 (4.0/8) () Spring blue L3 (5.8/33) () Spring purple L3 (6.8/39) () Spring green L3 (8/45.5) () Spring grey L3 (9/5.5) () Spring black L3 (0/57) () 6030 Spring-set short (5x) 6030 Spring white L7 (.3/3) () 603 Spring yellow L7 (.8/6) () 603 Spring orange L7 (3.4/9.5) () 6033 Spring red L7 (4./3.5) () 6034 Spring pink L7 (4.0/8) () 6035 Spring blue L7 (5.8/33) () 6036 Spring purple L7 (6.8/39) () 6037 Spring green L7 (8/45.5) () 6038 Spring grey L7 (9/5.5) () 6039 Spring black L7 (0/57) () Spring black L7 set (5x) = short = FR and RR 60 = short = FR 60 = long = RR

28 7 FINAL ASSEMBLY I

29 8 FINAL ASSEMBLY II See parts list 4043

30 Serpent 977-E /8 4wd EP ART No. DESCRIPTION MANUAL / DECALS 887 Decal Serpent black/white /8 () Decal sheet 977 black/white () CHASSIS / RADIO PLATE 9048 Topdeck carbon 977E Chassis carbon 5mm 977E RADIO INSTALLATION / BATTERY 070 Grommet rubber soft (4) 606 Antenna rod black () 453 Pivotball uni 4.5mm (4) Servo spacers (8) 9033 Ball-joints frame Topdeck carbon 977E Battery mount carbon 977E (4) Battery mount slider 977E (4) Battery mount L+R 977E (+) ESC mounting plate carbon 977E Servo levers steering (3) FRONT SECTION 65 Steel balls 5.8mm long (4) 9 Inner driveshaft adapter Rod threaded arb L/R 6mm (4) Trackrod M3x38mm () 4048 Adjust nut for front suspension 4063 Pivot ball threaded upper arm () 406 Balljoint 4.5 (4) 407 Balljoint 4.5 short () 453 Pivotball uni 4.5mm (4) Adj nut pivotball 8.5mm nylon (0) 8047 Pivot pin FR lw () 8084 Spacer-set caster (3) Pivot-balls 8.5mm () 908 Track-rod set () 9034 Servo-saver shaft outer 9035 Servo-saver pre-tension nut 9039 Servo saver spring hard 907 Springs quick-change short (4) 9080 Wheel-axles cvd set FR 908 Driveshaft-set cvd FR 908 Insert steel cvd () 9033 Ball-joints frame Wheel-axles cvd OS FR () Lever alu/spring/pin OS FR () Shim alu wheelaxle OS 8xxmm (4) Antirollbar ball 3mm () Antirollbar spacer 3mm () Pulley-set front () Suspension bracket FR up inserts (4+4) Excenter-set nylon FR/RR 9035 Steeringblock lever alu () Pivot pin FR up () 9035 Shocktower FR carbon Steeringblock excenters (4+4) Steeringblock () Suspension bracket FR lw (4+4) Suspension bracket FR up alu () Bearing bracket FR up Shock extension bracket FR alu () Bearing bushing antiroll bar FR+RR (+) Wishbone FR lw L+R Antiroll bar FR medium Bearingblock FR () Wishbone FR up () Servo saver set PARTS-LIST Servosaver shaft bushing () Servo saver shaft inner Oneway front axle 9049 Topdeck bracket fr L+R 977E 9043 Belt front 50S3M468 low friction Optionals Pivotball 5.8mm alu coated long (4) Antirollbar ball.5mm () Antirollbar spacer.5mm () Wheelaxle front OS alu () Pivot-balls 8.5mm titanium (8) Rim cover FR carbon () Steeringblock lever carbon () Shock extension bracket FR carbon () Antiroll bar FR soft Antiroll bar FR hard Servosaver bottom alu () Pulley front axle 8T alu Driveshaft cvd FR alu () 9036 Wishbone FR lw L+R hard 9036 Wishbone FR up () hard MIDDLE SECTION 9055 Belt tensioner shaft and nut 9033 Ball-joints frame Washer alu conic M4 (4) Pulley-set front () Belt tensioner plate carbon 9040 Midshaft mount L 977E 904 Midshaft mount R 977E 904 Midshaft bearing plate carbon 977E () 9043 Motormount 977E 9044 Motor slider 977E 9048 Midshaft outer 977E 9049 Midshaft inner 977E Midshaft screw 977E () 9043 Belt rear 50S3M38 low friction 9043 Belt front 50S3M468 low friction Topdeck bracket middle 977E Battery mount carbon 977E (4) Battery mount slider 977E (4) Battery mount L+R 977E (+) ESC mounting plate carbon 977E Fan mount alu 977E Optionals Pulley front axle 8T alu REAR SECTION 65 Steel balls 5.8mm long (4) 406 Balljoint 4.5 (4) 453 Pivotball uni 4.5mm (4) Adj nut pivotball 8.5mm nylon (0) Pivot-balls 8.5mm () 9038 Rod threaded L+R () 907 Springs quick-change short (4) Driveshaft rear 6mm () 9033 Ball-joints frame Track-rod with hole mm () Wheel-axles OS RR () Lever alu/spring/pin OS RR () Ball 6.8mm steel () Antirollbar ball 3mm () Antirollbar spacer 3mm () Camberlink ball-end 6.8mm (4) Pulley-set rear () Excenter-set nylon FR/RR Pivot insert nylon RR (4+4) Pivot pin RR lw () Rearplate alu

31 Shocktower RR carbon Suspension bracket RR-FR alu Upright () Wishbone RR lw () Bearingblock RR up () Bearingblock RR lw () Camberbracket RR carbon Shock extension bracket RR alu () Solid axle RR Pivotball threaded RR () Bearing bushing antiroll bar FR+RR (+) Antiroll bar RR medium Wheelbase spacer RR (+) 9045 Connector rr 977E () 9046 Belt tensioner mount rr 977E 9047 Belt tensioner shaft rr 977E () 9043 Belt rear 50S3M38 low friction Optionals Antirollbar ball.5mm () Antirollbar spacer.5mm () Cvd axle set RR () Wheelaxle cvd RR () Driveshaft cvd RR () Pivot-balls 8.5mm titanium (8) Wheelaxle cvd RR alu () Rim cover RR carbon () Shock extension bracket RR carbon () Antiroll bar RR soft Antiroll bar RR hard Pulley rear axle 48T alu Solid axle RR light Upright () hard Wishbone RR lw () hard Pinions Pinion T Pinion 3T Pinion 4T Pinion 5T Pinion 6T Pinion 7T Pinion 8T Pinion 9T Pinion 0T Spurgear speed gear 48T SL speed gear 49T SL speed gear 50T SL8 SHOCK ABSORBERS 644 O-ring adj.nut (0) 6000 Shockset RCM on-road short () 600 Shock RCM shaft short () 6004 Shock RCM body alu () 6005 Shock RCM bottom () 6006 Shock RCM top nut () 6007 Shock RCM membrame (4) 6008 Shock RCM bushings (8) 600 Shock RCM bottom O-ring (8) 60 Shock RCM parts frame nylon short (4) 60 Shock RCM parts frame nylon long (4) 60 Shock top RCM shock () 60 Shock balljoint short on-road () 603 Shock balljoint long on-road () 6034 Shock pistons set RCM (x4) Shock adj nut alu +o-ring (4) Optionals 6009 Shock RCM bushing machined (8) 605 Shock RCM shaft short TiN coated () 607 Shock piston RCM machined -hole (4) 608 Shock piston RCM machined -hole (4) 609 Shock piston RCM machined 3-hole (4) 600 Shock piston RCM machined 4-hole (4) SHOCK SPRINGS Spring red L3 (4./3.5) () Spring pink L3 (4.0/8) () Spring blue L3 (5.8/33) () Spring purple L3 (6.8/39) () Spring green L3 (8/45.5) () Spring grey L3 (9/5.5) () Spring black L3 (0/57) () 6030 Spring-set short (5x) 6033 Spring red L7 (4./3.5) () 6034 Spring pink L7 (4.0/8) () 6035 Spring blue L7 (5.8/33) () 6036 Spring purple L7 (6.8/39) () 6037 Spring green L7 (8/45.5) () 6038 Spring grey L7 (9/5.5) () 6039 Spring black L7 (0/57) () Spring-set long (5x) BODYMOUNTS FR and RR 60 Body clips (0) 79 Screw-nut M6 black nylon () 8085 Centering bushing threaded Washer alu conic M4 (4) Bumper 966 aero Body post alu eccentric short () T bracket bodymount RR carbon Bodymount pivot pin () Bodysupport long + short RR (+) Bodymount RR Bodymount FR BALL-BEARINGS 403 Ballbearing 5x0x3 () 3 Ballbearing 5x8x.5 () 3 Ballbearing 5x8x.5 flanged () 34 Ballbearing 6xx4 () 3 Ballbearing 6x0x3 () 346 Ball-bearing x8x4 () FASTNERS 00 Screw allen countersunk m4x8 (0) 00 Screw allen countersunk m4x0 (0) 003 Screw allen countersunk m4x6 (0) 004 Screw allen countersunk m3x8 (0) 005 Screw allen countersunk m4x (0) 006 Screw allen flanged roundhead m5x (0) 007 Screw allen cilinderhead m3x6 (0) 008 Screw allen roundhead m3x6 (0) 009 Screw allen roundhead m3x0 (0) 00 Screw allen roundhead m3x6 (0) 0 Screw allen roundhead m3x4 (0) 0 Screw allen roundhead m3x (0) 03 Screw allen roundhead m4x8 (0) 04 Setscrew allen m3x8 (0) 05 Setscrew allen m3x4 (0) 06 Setscrew allen m3x3 (0) 07 Setscrew allen m3x (0) 08 Setscrew allen m4x4 (0) 09 Setscrew allen m4x6 (0) 00 Setscrew allen m4x0 (0) 0 Setscrew allen m5x6 (0) 0 Screw allen countersunk m3x6 (0) 03 Screw philips roundhead 3.5x3 (0) 04 Screw allen roundhead m3x8 (0) 05 Screw allen countersunk m3x0 (0)

32 3 06 Screw allen countersunk m.5x (0) 07 Screw allen countersunk m3x (0) 08 Screw allen roundhead m3x5 (0) 09 Screw allen cilinderhead m3x0 (0) 030 Screw allen roundhead m.5x6 (0) 03 Screw allen roundhead m.5x0 (0) 03 Screw allen countersunk m3x6 (0) 033 Screw philipshead countersunk.5x8 wide (0) 034 Screw philipshead countersunk.5x0 wide (0) 035 Screw allen countersunk M.5x0 (0) 036 Screw allen countersunk M.5x8 (0) 037 Setscrew allen M3x6 (0) 038 Screw allen countersunk M4x4 (0) 039 Screw allen countersunk M3x40 (0) 040 Screw allen roundhead M3x0 (0) 04 Screw allen roundhead M3x (0) 04 Screw allen roundhead M3x5 (0) 043 Screw allen roundhead M4x8 (0) 044 Screw allen roundhead M3x8 (0) 045 Screw allen roundhead flanged M3x (0) 046 Screw allen roundhead flanged M3x6 (0) 047 Screw ph roundhead M.5x5 (0) 048 Setscrew allen M5x4 (0) 049 Screw allen countersink Mx0 (0) 050 Screw M6x nylon black () 05 Screw allen cilinderhead M4x0 (0) 05 Screw allen cilinderhead M3x8 (0) 053 Screw allen roundhead M.3x4(0) 054 Setscrew allen M3x0 (0) 055 Setscrew allen M3x5 (0) 056 Screw allen countersunk M.x6 (0) 057 Screw allen countersunk M3x5 (0) 058 Screw allen countersunk M3x5 (0) 059 Screw allen countersunk M3x8 (0) 060 Screw allen cilinderhead M.x (0) 06 Screw allen cilinderhead Mx6 (0) 06 Setscrew allen M3x.5 (0) 063 Setscrew allen M3x (0) 064 Screw allen roundhead M3x4 (0) 065 Screw allen cilinderhead Mx5 (0) 066 Screw allen countersunk M.5x5 (0) 067 Screw allen roundhead flanged M3x8 (0) 068 Screw allen roundhead flanged M3.5x0 (0) 069 Screw allen roundhead flanged M4x0 (0) 070 Screw allen roundhead flanged M3x8 (0) 07 Screw ph roundhead widethread.5x6 (0) 07 Screw allen roundhead flanged M3X6 (0) 073 Screw ph countersunk widethread.5x (0) 074 Screw allen countersunk M4x6 (0) 075 Screw allen cilinderhead M3x40 (0) 076 Screw allen cilinderhead M3x8 (0) 077 Screw allen roundhead M4x (0) 078 Screw allen cilinderhead M3x4 (0) 079 Screw allen roundhead M.5x8 (0) 080 Setscrew allen M5x0 (0) 08 Screw M5x0 + Nut nylon black (4+4) 08 Screw allen roundhead Mx4 (0) 083 Screw allen countersunk M3x0 (0) 084 Screw allen countersunk M3x4 (0) 085 Screw allen cilinderhead M3x30 (0) 086 Screw allen cilinderhead M3x35 (0) 087 Setscrew allen M3x6 (0) 088 Screw allen cilinderhead Mx0 (0) 089 Setscrew allen M4x8 (0) 000 Pin.5x8 (0) 00 Pin 3x (0) 00 Pin 5x5 (0) 003 Pin 3x4 (0) 004 Pin 3x0 (0) 005 Pin 3x (0) 006 Pin.5x (0) 007 Pin.5x (0) 008 Pin nra x9.8 (4) 009 Pin nra x8 (4) 00 Pin 3x3 (0) 0 Pin.5x3 (0) 0 Pin.5x7 (0) 03 Pin.5x0 (0) 04 Pin 3x5 (0) 05 Pin x (0) 06 Pin.5x5 (0) 07 Pin x9 (0) 08 Pin 3x0 (0) 09 Pin x4 (0) 00 Pin.5x8 (0) 0 Pin.7x7.6 (0) 0 Pin.7x8.5 (0) 0300 E-clip.3 (0) 030 E-clip 3. (0) 030 E-clip 4.0 (0) 0303 E-clip 5.0 (0) 0304 E-clip 7.0 (0) 0305 Seger clip x.0 (0) 0306 E-clip 6.0 (0) 0307 E-clip 9.0 (0) 0400 Shim 6.0x0x0.(0) 040 Shim3.x7x0.5 (0) 040 Nut nylock M3 (0) 0403 Nut nylock M4 (0) 0404 Shim 6x8x0.3 (0) 0405 Nut nylock M4 flanged (0) 0406 Nut nylock M. (0) 0407 Nut M3 (0) 0408 Shim 3X5X0.3 (0) 0409 Shim 3X5X (0) 040 Shim 3X5X (0) 04 Shim 3X5X4 (0) 04 Shim 3.5X8X (0) 043 Shim 3.5XX0. (0) 044 Shim 3X6X0. (0) 045 Shim 3X6X0.5 (0) 046 Shim 3X6X0.8 (0) 047 Shim 3X6X3 (0) 048 Shim 4X8X0. (0) 049 Shim 4X9.5X (0) 040 Shim 4X9.5X(0) 04 Shim 4X9.5X4(0) 04 Shim 4X0X0.3 (0) 043 Shim 5X8X0. (0) 044 Shim 5X8X0.3 (0) 045 Shim 5X0X0.3 (0) 046 Shim 5X0X0.5 (0) 048 Shim 6.5X8X0.5 (0) 049 Shim 6X.75X0. (0) 043 Shim 8XX0. (0) 043 Shim 8XX0. (0) 0433 Shim X5X0.5 (0) 0434 Shim X8X0.3 (0) 0435 Shim 3X6X0. (0) 0436 Shim 3x5x3 (0) 0437 Nut M.5 (0) 0438 Shim.5x6x0.5 (0) 0439 Shim 3x7.5x (0) 0440 Shim.5x5x0.4 (0) 044 Nut nylock M3 flanged (0) 044 Shim 4x8x0.6 (0) 0443 Shim 5x5x0. (0) 0444 Nut M4 nylon (0)

33 0445 Shim 4x0x0. (0) 0446 Shim 5x5x0. (0) 0447 Shim 3x7x7 (0) 0448 Shim 3x6x6 (0) 0449 Shim 3x6x (0) 0450 Nut M (0) 045 Nylock nut M4 flanged alu (0) 045 Nut M4 flanged knurled (0) 0453 Shim 3x7x3 (0) TOOLS Pit-caddy 9050 Tool-bag 9050 Pit-bag medium. 3 drawers Fuel bottle 500ml Ballcup tool Toolset for onroad (7pcs) with Tools bag Allen wrench.5 x 0mm 9050 Allen wrench.0 x 0mm 905 Allen wrench.5 x 0mm 905 Allen wrench 3.0x 0mm 9053 Ball driven hex wrench.0 x 0mm 9054 Ball driven hex wrench.5 x 0mm 9055 Ball driven hex wrench 3.0 x 0mm 9056 Tool tip allen wrench.5 X 0mm 9057 Tool tip allen wrench.0 X 0mm 9058 Tool tip allen wrench.5 X 0mm 9059 Tool tip allen wrench 3.0 X 0mm 9050 Tool tip Ball driven hex wrench.0x0mm 905 Tool tip Ball driven hex wrench.5x0mm 905 Tool tip Ball driven hex wrench 3.0x0mm 9053 Turnbuckle wrench 3mm 9054 Turnbuckle wrench 4mm 9055 Turnbuckle wrench 5mm 9056 Flat head screwdriver 3.0 x 50mm 9057 Flat head screwdriver 4.0 x 50mm 9058 Phillips screwdriver.0 x 45mm 9059 Phillips screwdriver 3.5 x 0mm Phillips screwdriver 5.8 x 0mm 9053 Nut driver 5.0 x 00mm 9053 Nut driver 5.5 x 00mm Nut driver 7.0 x 00mm Reamer with end cap for lexan body Exhaust spring / caster clip remover Wrench-glowplug / clutchnut -0mm long Flywheel wrench Nut driver 4.5 x 00mm 9084 T-shirt Serpent Splash white (L) 9085 T-shirt Serpent Splash white (XL) 9086 T-shirt Serpent Splash white (XXL) 9087 T-shirt Serpent Splash white (XXXL) 9088 T-shirt Serpent Splash orange (S) 9089 T-shirt Serpent Splash orange (M) 9090 T-shirt Serpent Splash orange (L) 909 T-shirt Serpent Splash orange (XL) 909 T-shirt Serpent Splash orange (XXL) 9093 T-shirt Serpent Splash orange (XXXL) 9094 T-shirt Serpent Splash black (S) 9095 T-shirt Serpent Splash black (M) 9096 T-shirt Serpent Splash black (L) 9097 T-shirt Serpent Splash black (XL) 9098 T-shirt Serpent Splash black (XXL) 9099 T-shirt Serpent Splash black (XXXL) 900 Hoody sweater Serpent black-zip (S) 900 Hoody sweater Serpent black-zip (M) 9003 Hoody sweater Serpent black-zip (L) 9004 Hoody sweater Serpent black-zip (XL) 9005 Hoody sweater Serpent black-zip (XL) 9006 Hoody sweater Serpent black-zip (3XL) 9007 Hoody sweater Serpent black-zip (4XL) ) 905 T-shirt Serpent WC edition black (S) 906 T-shirt Serpent WC edition black (M) 907 T-shirt Serpent WC edition black (L) 908 T-shirt Serpent WC edition black (XL) 909 T-shirt Serpent WC edition black (XXL) 900 T-shirt Serpent WC edition black (XXXL) Page 3 MERCHANDISING 896 Cap serpent black-orange 907 Winter jacket Serpent black-orange hooded (M) 9073 Winter jacket Serpent black-orange hooded (L) 9074 Winter jacket Serpent black-orange hooded (XL) 9075 Winter jacket Serpent black-orange hooded (XL) 9076 Winter jacket Serpent black-orange hooded (3XL) 9008 Winter jacket Serpent black-orange hooded (4XL) 9056 Polo shirt Serpent black (S) 9057 Polo shirt Serpent black (M) 9058 Polo shirt Serpent black (L) 9059 Polo shirt Serpent black (XL) 9060 Polo shirt Serpent black (XXL) 906 Polo shirt Serpent black (XXXL) 908 T-shirt Serpent Splash white (S) 9083 T-shirt Serpent Splash white (M)

34 33 NEWS / NOTES

35 34

36 35

37 - info@serpent.com

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE Welcome to Serpent The Serpent Viper 977 EVO is the latest generation of the successful 977 Viper gaspowered car, combining ultimate performance into a single package.

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE INTRODUCTION The Serpent Natrix 748e is based on the successful Natrix 748 gaspowered car ( worlds TQ and Vice champion), combining ultimate performance into a single

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE Introduction Serpent likes to welcome you to the fascinating world of rc car racing. You are now part of the worldwide network of Serpent drivers, which gives you access

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE The Serpent S811-B 2.1 Cobra is a complete new platform for the 1/8 scale gas offroad category of racing. The Serpent S811-B 2.1 Cobra is designed to be a world champion,

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE Welcome to Serpent The Serpent Cobra E-truggy is based on the successfull Cobra offroad platform. It is designed to be a world champion, while still being easy to use,

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE The Serpent S811-B 2.0 Cobra is a complete new platform for the 1/8 scale gas offroad category of racing. The Serpent S811-B 2.0 Cobra is designed to be a world champion,

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE Welcome to Serpent You are now part of the worldwide network of Serpent drivers, which gives you superior technical support and access to many benefits that only Serpent

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE Welcome to Serpent Thank you for choosing the Serpent Spyder SC carkit, and joining the growing Team Serpent Network! Serpent started the development and production

More information

INTRODUCTION INSTRUCTIONS. plastic parts CONTENTS

INTRODUCTION INSTRUCTIONS. plastic parts CONTENTS INTRODUCTION Thank you very much for selecting this Serpent rc car and thus become a member of the ever growing worldwide Serpent racing family. Serpent started in 980 and has been growing its product-line

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE INTRODUCTION Serpent enters the small scale competition market with the S40, which like all our previous cars, has been designed to perform straight from the box. Made

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE The Serpent 966 is the next evolution of Serpent s hugely-successful 960 lineage, combining ultimate performance into a single package. The Serpent 966 was designed

More information

1/8 scale Ready To Race Gas Powered GT INSTRUCTION MANUAL & REFERENCE GUIDE

1/8 scale Ready To Race Gas Powered GT INSTRUCTION MANUAL & REFERENCE GUIDE 1/8 scale Ready To Race Gas Powered GT INSTRUCTION MANUAL & REFERENCE GUIDE 2 Powered by Introduction Thank you very much for buying this Serpent rc car. You are now member of a large following of Serpent

More information

1/10 scale Ready To Race electro Short Course 2WD INSTRUCTION MANUAL & REFERENCE GUIDE

1/10 scale Ready To Race electro Short Course 2WD INSTRUCTION MANUAL & REFERENCE GUIDE 1/10 scale Ready To Race electro Short Course 2WD INSTRUCTION MANUAL & REFERENCE GUIDE Introduction powered by Thank you very much for buying this Serpent rc car. You are now member of a large following

More information

1/8TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL

1/8TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL /8TH SCALE WD COMPETITION CAR INSTRUCTION MANUAL INTRODUCTION The Serpent 960 is the next evolution of Serpent s hugely-successful 90 lineage, combining ultimate performance into a single package. The

More information

1/8 scale Ready To Race electro Buggy USER MANUAL & REFERENCE GUIDE

1/8 scale Ready To Race electro Buggy USER MANUAL & REFERENCE GUIDE 1/8 scale Ready To Race electro Buggy USER MANUAL & REFERENCE GUIDE 2 Powered by Introduction Thank you very much for buying this Serpent rc car. You are now member of a large following of Serpent fans

More information

1:10 SCALE 200mm 4WD GAS ON-ROAD. Reference Guide

1:10 SCALE 200mm 4WD GAS ON-ROAD. Reference Guide 1:10 SCALE 200mm 4WD GAS ON-ROAD Reference Guide Introduction Parts list and Exploded views The parts list and the exploded views for the Serpent 705 are separate from the Instruction manual. The exploded

More information

USER MANUAL & REFERENCE GUIDE

USER MANUAL & REFERENCE GUIDE 1/8 scale Ready To Race gaspowered Buggy USER MANUAL & REFERENCE GUIDE Introduction Thank you very much for buying this Serpent rc car. You are now member of a large following of Serpent fans worldwide.

More information

Introduction. Contents

Introduction. Contents Instruction Manual Introduction Congratulations on your newly acquired Serpent 70. You have chosen the highest quality, ultimate-performance 00mm racecar that is easy to use, assemble, and set up. As part

More information

1/10TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL

1/10TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL /0TH SCALE WD COMPETITION CAR INSTRUCTION MANUAL INTRODUCTION Rising to the challenge of improving upon their racewinning Serpent 70, the engineers at Serpent once again came up with a formidable challenger,

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE 1/10 scale Ready To Race touring car INSTRUCTION MANUAL & REFERENCE GUIDE Introduction Thank you very much for buying this Serpent rc car. You are now member of a large following of Serpent fans worldwide.

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic

More information

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18

More information

INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT

INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT Tabella 1 Code CM-00001 Code R0001 R0002 R0003 R0004 R0005 R0006 R0007 R0008 R0009 R0010 R0011 R0012 R0013 R0014 R0015 R0016 R0017 R0018 R0019 R0020 R0021 R0022 R0023 R0024 R0025 R0026 R0027 R0028 R0029

More information

BEFORE YOU START CUSTOMER SUPPORT

BEFORE YOU START CUSTOMER SUPPORT BEFORE YOU START The X10 is a high-quality, 1/10-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we

More information

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims ()

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01 NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005

More information

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

DIFFERENTIAL STEERING RACK

DIFFERENTIAL STEERING RACK BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball

More information

INSTRUCTION MANUAL SUPPLEMENTARY SHEET

INSTRUCTION MANUAL SUPPLEMENTARY SHEET INSTRUCTION MANUAL SUPPLEMENTARY SHEET The T3R Raycer is based on the hugely-successful, race-winning T3 and as such the majority of spare parts and option parts are fully compatible between the two cars.

More information

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend

More information

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01 BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6

More information

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit.

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. INSTRUCTION MANUAL SUPPLEMENTARY SHEET Use this NT1 2013 Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. New and Improved Parts All of these parts are

More information

New Generation Rear Wheel Drive

New Generation Rear Wheel Drive New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

carbon fiber before assembly. Sand glue to the edges and

carbon fiber before assembly. Sand glue to the edges and chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28

More information

Rustler 4X4 (Model ) Parts List

Rustler 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Pinion Gear and Setscrew

Pinion Gear and Setscrew XRAY T1 Factory Kit 2005 The new XRAY T1 Factory Kit '05 (T1FK'05) is the 5th generation of XRAY's extremely successful T1 family of 1/10-scale on -road electric touring cars. The T1FK'05 is a large evolutionary

More information

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE

More information

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear 1 ASSEMBLY OF THE FRONT AND REAR BALL DIFF. 37145 40060 40060 2.6mm Nylon Nut 37110 35958 37132 2.6x6x1mm Washer 37148 Apply Grease 37120 (12 Pcs) Builds two differentials for front and rear. 38288 35958

More information

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675 pr GT RACING FRONT RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

Bigfoot (Model ) Parts List

Bigfoot (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Stampede (Model 36054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING KIT

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING 10 235 KIT E Thank you for purchasing VBC Racing product. Things that we should remind you. This

More information

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Stampede (Model 36054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Assembly Manual. 1/10th Formula 1 Car

Assembly Manual. 1/10th Formula 1 Car Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp

More information

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied Owner s Manual Thank you for choosing the Team Magic E4JR. The E4JR includes a large selection of the important specialty parts when compared to the previous versions. Before you start building your new

More information

Slash (Model 58024) Parts List

Slash (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58024) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Slash VXL (Model ) Parts List

Slash VXL (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash VXL (Model 58076-3) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): 8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to

More information

Slash (Model ) Parts List

Slash (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58034-2) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Telluride 4X4 (Model ) Parts List

Telluride 4X4 (Model ) Parts List Telluride 4X4 (Model 67044-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

Slash 4X4 (Model ) Parts List

Slash 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash 4X4 (Model 68054-4) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

E-Revo (Model 5603) Parts List

E-Revo (Model 5603) Parts List E-Revo (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect.

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect. BEFORE YOU START The XB8E is a high-competition, high-quality, 1/8 electric buggy intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This

More information

Slash (Model 58024) Parts List

Slash (Model 58024) Parts List Slash (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

TITAN CATALOG 2013 HEX WRENCH & TOOLS RACING EQUIPMENT

TITAN CATALOG 2013 HEX WRENCH & TOOLS RACING EQUIPMENT HEX WRENCH & TOOLS 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 11015 11020 11320

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect.

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect. BEFORE YOU START The T4 is a high-competition, high-quality, 1/10-scale touring car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Rustler (Model 37054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

Bag 1. Bag 1. Center Pivot. Center Pivot

Bag 1. Bag 1. Center Pivot. Center Pivot 8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball

More information

Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arrange

Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arrange Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

IMP4CT 4wd buggy by Elcon Models

IMP4CT 4wd buggy by Elcon Models IMP4CT 4wd buggy by Elcon Models 1 Content Introduction... 3 Rear Assembly... 4 Front assembly... 15 Mid section assembly... 18 2 Introduction Welcome and thank you for choosing the Elcon Models IMP4CT

More information

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect.

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect. BEFORE YOU START The X1 is a high-competition, high-quality, 1/10-scale Formula car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This

More information

TITAN CATALOG 2015 HEX WRENCH & TOOLS RACING EQUIPMENT

TITAN CATALOG 2015 HEX WRENCH & TOOLS RACING EQUIPMENT HEX WRENCH & TOOLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 11015 11020 11320 11401 11501 11101 11645 11830 12025 12325 12030 12402 12655 12700 12770 12835 12840 13402 13502 13670

More information

INTRODUCTION FAILURE TO FOLLOW THESE INSTRUCTIONS WILL BE CONSIDERED AS ABUSE AND/OR NEGLECT. SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL

INTRODUCTION FAILURE TO FOLLOW THESE INSTRUCTIONS WILL BE CONSIDERED AS ABUSE AND/OR NEGLECT. SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL INTRODUCTION The XB8E is a high-competition, high-quality, 1/8 electric off-road car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This

More information

ABC HOBBY ORIGINAL RADIO CONTROL CAR

ABC HOBBY ORIGINAL RADIO CONTROL CAR ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE

More information

Slash (Model 5805) Parts List

Slash (Model 5805) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Slash (Model 5805) Parts List Bearings & Bushings

More information

Slash 4X4 (Model ) Parts List

Slash 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash 4X4 (Model 68054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect.

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. Failure to follow these instructions will be considered as abuse and/or neglect. BEFORE YOU START The X1 is a high-competition, high-quality, 1/10-scale Formula car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This

More information

Slash 4X4 (Model ) Parts List

Slash 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash 4X4 (Model 68086-3) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Slash ( ) Parts List

Slash ( ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Slash (58044-1) Parts List Bearings & Bushings 4607

More information

En Instruction Manual De Bauanleitung. Fr Manuel de montage

En Instruction Manual De Bauanleitung. Fr Manuel de montage En Instruction Manual De Bauanleitung Fr Manuel de montage RTR Trophy Truggy Flux En De Fr Jp Vol.1 101875 Chassis Maintenance Chassis Wartung Entretien du châssis シャーシのメンテナンス 1 Gear Differential 101087

More information

Nitro Slash (Model ) Parts List

Nitro Slash (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Nitro Slash (Model 44056-3) Parts List Air Filters 5262 Air filter and pre-filter

More information

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES 1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are

More information

Slash 4X4 ( ) Parts List

Slash 4X4 ( ) Parts List Slash 4X4 (68086-3) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

INSTRUCTION MANUAL INSTRUCTION MANUAL

INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL Thank you for purchasing Pro-Line s PRO-Fusion SC 4 4! For Over 35 years, Pro-Line has designed and manufactured the best RC products in the world. This 1:10 scale

More information

MR-4BCS Parts List (Updated 9/15/03)

MR-4BCS Parts List (Updated 9/15/03) 4WD Offroad Kits MRBC-1S MR-4BCS Competition 4wd Buggy Kit $ 499.95 Chassis Parts ZS-001B Front Bumper 1 $ 3.75 ZS-002GB Graphite Main Chassis 1 $ 39.00 ZS-003UDS Upper Deck 1 $ 10.75 ZS-118 Battery Plate

More information

T-Maxx (4907) Parts List

T-Maxx (4907) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. T-Maxx (4907) Parts List Air Filters 5262 Air filter

More information

Assembly Manual. 1/10th World GT car

Assembly Manual. 1/10th World GT car Assembly Manual 1/10th World GT car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the

More information

:: Additional Your new RC12R6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Your new RC12R6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RCR6 Kit. Please take a moment to read through

More information

Item Number Item Name MSRP MAP

Item Number Item Name MSRP MAP Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL

More information

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 LTO SPORT KIT FOR OVAL RACING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED

More information

Failure to follow these instructions will be considered as abuse and/or neglect.

Failure to follow these instructions will be considered as abuse and/or neglect. BEFORE YOU START The X1 is a high-competition, high-quality, 1/10-scale Formula car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This

More information

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars.

More information

1/8 RG PD1871 TRANS CASE/BULK HEAD SET,S3 PD1875 UNIV. REBUILD KIT,S3 PD1876 CLUTCH SHOE (3), 1/8 PD1877 FR SHOCK SET(2),S3

1/8 RG PD1871 TRANS CASE/BULK HEAD SET,S3 PD1875 UNIV. REBUILD KIT,S3 PD1876 CLUTCH SHOE (3), 1/8 PD1877 FR SHOCK SET(2),S3 9279W AIR FILTER, 1/8 WHITE AN0747 FOAM FILTER (3), 1/8 PD1052 REAR BODY MOUNT PD1211 BODY SUPPORT SET 1/8 RG PD1242 1/8 CLUTCH BELL, 26MM 13T PD1795 TIRE W/FOAM RALLY, 1/8 PD1800 DIFFERENTIAL SET CENTER,

More information

SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL IMPORTANT NOTES NITRO ENGINES

SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL IMPORTANT NOTES NITRO ENGINES INTRODUCTION The XRAY XB808 is a modern, high-competition premium luxury racing 1/8 nitro buggy that is the epitome of high-performance and fine distinctive design. Your XB808 offers highest performance,

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. E-Revo (Model 56036-4) Parts List Bearings & Bushings 4609 Ball bearings (5x10x4mm)

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List E-Revo (Model 56036-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

INSTRUCTION. FOX4x4 Kit Features:

INSTRUCTION. FOX4x4 Kit Features: INSTRUCTION Congratulations on your purchase of the new SWORKz 1/10 scale FOX4x4 off-road ready to run brushless power CAGE buggy. Please read this manual thoroughly before you attempt to drive your FOX4x4.

More information

TRX-4 Sport (Model ) Parts List

TRX-4 Sport (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. TRX-4 Sport (Model 82024-4) Parts List Axle Components 8241 Axle housing, front 8242

More information

T-Maxx: TRX 3.3, TQi Radio (4907) Parts List

T-Maxx: TRX 3.3, TQi Radio (4907) Parts List T-Maxx: TRX 3.3, TQi Radio (4907) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Air

More information

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL

BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL BEFORE YOU START The X10 is a high-competition, high-quality, 1/10 pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not

More information

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube Caution Please read the following manual closely and familiarize yourself with its contents before operating the model. Keep the manual in a safe place for future reference for repairs, part numbers and

More information