COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING KIT
|
|
|
- Paula Lane
- 5 years ago
- Views:
Transcription
1 COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT SUPPLEMENTARY MANUAL FOR LIGHTNING KIT E Thank you for purchasing VBC Racing product. Things that we should remind you. This VBC Racing kit is a high performance, racing grade car kit intended for experienced racers. The kit compose of VBC formulated composite materials, top quality full carbon fiber chassis and high grade 7075 material which will give you a competitive edge over the others. Novice racer should seek advice from more experienced racer before assembly. Always keep this instruction manual handy at all times for quick reference even after completing the assembly. Before your assembly, sand the chassis edges. Sand the chassis edges with #600 sand paper and apply CA glue to the edges and counter sink holes. Need help or support. If you need help or you would like to leave us a comment, please to our support team: support@vbc-racing.com or visit our web site 5
2 2 Pivot Brace Assembly Part2 STEP2-5 M2x6 Cap Head Lightning Pod Link Set Tighten each side screw slowly, Make sure the lower pod plate can rotate freely. M2x6 Cap Head M2x6 Cap Head C-02-SC-R2.0x6 x 4 M3 Locknut C-02-SC-NN03 x 2 M2x6 Cap Head M3x10 Flathead C-02-SC-F0310 x 2 M2x6 Cap Head Note the direction screw in from the larger hole side 3 Rear Bulkhead Assembly Part1 M3x10 Flathead M3x10 Flathead LightningF Al7075 Left Bulkhead LightningF Al7075 Motor Mount LightningF Al7075 Motor Mount B-02-VBC-5128 x 1 LightningF Al7075 Left Bulkhead B-02-VBC-5129 x 1 C-02-SC-F0306 x 4 VBC Racing LIGHTNING
3 3 Rear Bulkhead Assembly Part2 STEP2-5 Lightning Graphite Rear Pod Strut A-01-P50278 x 1 C-02-SC-R0306 x 4 Lightning Graphite Rear Pod Strut A-01-P50278 x 1 4 Chassis Brace Assembly 4.7mm Ball Nuts M3x8 Set Screw Thead Lock 4.7mm Ball Nuts B-02-VBC-5020 x 2 Aluminum Side Spring Retainer A-01-P50210 Lightning 10 Rear Tweak Plate M3x8 Set Screw Thead Lock 4.7mm Ball Nuts C-02-SC-R0306 x 4 Side Spring (Medium/Gold) Aluminum Side Spring Retainer B-02-VBC-5074 x 2 OPTIONAL SIDE SPRINGS SET : Side Spring (Soft/Silver) Side Spring (Medium/Gold) Side Spring (Hard/Black) (A-03-VBC-1047) Aluminum Side Spring Retainer Side Spring (Medium/Gold) A-03-VBC-1047 x 2 Side Spring (Medium/Gold) M3x8 Set Screw C-02-SC-SS-0308 x 2 VBC Racing LIGHTNING
4 STEP2-5 5 Ball Connector 4.7x17mm Ball Connector B-02-VBC-0045 x 1 2mm Spacer 4.7mm Ball Nuts B-02-VBC-5020 x 2 2mm Spacer 1mm Spacer T Spacer B-02-VBC x 2 Lightning10 Graphite Rear Shock Mount Plate T Spacer B-02-VBC x 1 M3x10 Roundhead C-02-SC-R0310 x 1 4.7mm Ball Nuts C-02-SC-R0306 x 4 M3 Locknut Front Suspension Assembly M3x12 Flat Head Screw C-02-SC-F0312 x 4 M3 Lock Nut M3 Locknut C-02-SC-NN03 x 4 Wheel Base 271mm Setup M3x12 Flat Head Screw Wheel Base 265mm Setup VBC Racing LIGHTNING10 06
5 7 Ball Differential Assembly STEP7-8 M2.5x8 Cap Head B02-G Lightning 2mm Rear Axle Spacer M2.5x8 Cap Head Screw C-02-SC-R2508 x 2 M2.5x8 Cap Head Lightning10 Left Rear Wheel Hub B-02-P50213 x 1 8 Servo And Top Plate Assembly Turnbuckle Cup (Long) 3x52mm Hardened SpringSteel Turnbuckle B02-G Lightning 2mm Rear Axle Spacer Turnbuckle Cup (Long) Ball Cups,, Long A-03-VBC-6030 x 4 << LEFT >> 3x52mm Hardened Springsteel Turnbuckle C-02-VBC-6003 x 2 << RIGHT >> M3x6x0.5mm Spacer B-02-VBC-5093 x 4 M3x8 Roundhead C-02-SC-R0308 x mm Ball Connector 4.7x17mm A-02-VBC-5092 x 2 Optional : Tie Rod Wrench Set D-05-VBC-0048 Servo Spacer 2mm Servo Spacer 1mm Alum Servo Mount Alum Servo Mount for Low Profile Servo B-02-P50262 T Spacer B-02-VBC x 2 M3x6x0.5mm Spacer SERVO IS NOT INCLUDED Servo Spacer 2mm T Spacer B-02-VBC x 4 Servo Spacer 1mm M3x8 Roundhead Servo Spacer 1mm A-03-VBC-0032 x 2 M3x6x0.5mm Spacer M3 Locknut Servo Spacer 2mm A-03-VBC-0033 x 2 M3x8 Roundhead M3 Locknut C-02-SC-NN03 x 2 Ball Connector 4.7x17mm T Spacer T Spacer T Spacer Make sure the screw is correct for your servo Servo Saver Set 3 Difference Servo Adaptor For Sanwa/KO [A) /Futaba [F] /JR/Hitec [H] Servo Saver Set B-03-VBC-5017 x1 VBC Racing LIGHTNING
6 STEP9 Sealer O-Ring TBB Shock Piston M2 E-Clip 9 TBB Shock Piston (3 holes) TBB Shock Height Adjuster M2 E-Clip Assemble TBB Shock Insert Sealer O-Ring inside the Shock Height Adjuster groove Note TBB Shock Piston Groove Is Facing Downwards TBB Shaft Guide Shock Shaft TBB Shock Body B-02-VBC-0120 x 1 Note The Direction Of Slot On Bottom TBB Shock Body TBB Shock Height Adjuster B-02-VBC-0121 x 1 Wipe small amount of shock oil to the thread TBB Shock Bottom Cap A-03-VBC-0122 x 1 Shaft Sealer O-Ring TBB Shaft Guide TBB Shock Height Adjuster TBB Shock Piston (3 holes) A-03-VBC-0123 x 1 TBB Shaft Cap Turnbuckle Cup A-03-VBC-0039 x 1 TBB Oil Sealer Cap TBB Shock Bottom Cap TBB Shaft Cap B-03-VBC-0125 x 1 TBB Shaft Guide A-03-VBC-0126 x 1 Shock Shaft B-02-VBC-0043 x 1 Turnbuckle Cup Sealer O-Ring (Shock Height Adjuster) B-03-VBC-0128 x 1 Shaft Sealer O-Ring B-03-VBC-0012 x 1 M2 E-Clip B-02-VBC-0129 x 2 Note the double ring face to ball connector TBB Spring Bottom Support TBB Shock Top Connector A-03-VBC-0130 x 1 TBB Spring Bottom Support A-03-VBC-0131 x 1 TBB Oil Sealer Cap (Medium Soft) B-03-VBC-0132 x 1 Shock Spring White B-02-VBC-0073-B TBB Shock Body Cap B-02-VBC-0133 x 1 12
7 STEP8,STEP Top Plate Assembly Aluminum Shock Mount Brace T Spacer 235 Shock Mount Plate C-02-SC-F0306 x 6 C-02-SC-R0306 x 4 Aluminum Shock Mount Brace A-01-VBC-5003 x 1 Lightning Shock Mount Plate A-01-P50304 x 1 Lightning10 Graphite Front Shock Mount Plate A-01-P50208 Lightning10 Graphite Front Shock Mount Plate A-01-P50208 x 1 Body Height Adjuster Support 10 Front Bumper Assembly T Spacer B-02-VBC x 2 Front Body Post Front Body Post Body Height Adjuster Support M2x12 Shaft Pin M2x12 Shaft Pin Lightning12 Plastic Front Bumper D-05-VBC-0112 x 1 M3x10mm Flat Head Screw C-02-SC-F0310 x 2 Lightning Graphite Front Bumper A-01-P50273 M3x8mm Flat Head Screw C-02-SC-F0308 x 2 M3x8mm Flat Head M3x10mm Flat Head M3 Locknut C-02-SC-NN03 x 2 M2x12 Shaft Pin B-02-VBC-0022 x 2 M3x10mm Flat Head M3x8mm Flat Head Body Height Adjuster Support A-03-VBC-0015 x 2 Front Body Post A-03-VBC-0013 x 2 VBC Racing LIGHTNING10 13
8 COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION PAN CAR KIT Instruction Book P-01-P50317 VBC Racing Lightning /10 Pan Car Kit D-05-VBC-CK11
INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should
E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we
INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should
carbon fiber before assembly. Sand glue to the edges and
chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28
Assembly Manual. 1/10th Formula 1 Car
Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp
1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES
1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are
Calandra Racing Concepts
Calandra Racing Concepts Carpet Knifeä Version 3 Assembly and Setup Manual Congratulations! You now own the best 1/12th scale car on the market today, the Carpet Knifeä Version 3. This completely new car
Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN
Shown with optional GFR-1017R Body Posts J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The
DIFFERENTIAL STEERING RACK
BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball
J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034
J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The Hyperdrive Assault has gone through months
BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA
BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision
Assembly Manual. 1/10th World GT car
Assembly Manual 1/10th World GT car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the
RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS
RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 LTO SPORT KIT FOR OVAL RACING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED
KSKT RACING PRODUCTS
KSKT RACING PRODUCTS ''KSK-B'' SPEC RACING CHASSIS ASSEMBLY INSTRUCTIONS 'The Leader in SK Racing' 1 CHASSIS KIT FEATURES Black Carbon Fiber Chassis Components 2.5 mm Thick Main Chassis Battery mounting
ABC HOBBY ORIGINAL RADIO CONTROL CAR
ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE
BEFORE YOU START CUSTOMER SUPPORT
BEFORE YOU START The X10 is a high-quality, 1/10-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision
BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA
BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision
SUSPENSION PARTS LOSB2002 F/R Suspension Arms (pr)(lst2)... $10.00 LOSB2102 Steering Bell Cranks, Shafts, & Chassis Braces (LST/2)... $7.00 LOSB2104 Front Spindles & Carriers (LST2)... $7.00 LOSB2106 Rear
=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering
NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic
Bag 1. Bag 1. Center Pivot. Center Pivot
8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball
SOARSEIKI.Co.,Ltd
SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040
7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT
RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING
OWNER'S MANUAL 2000 & ROAR National Champion
2000 & 2001 ROAR National Champion OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being
New Generation Rear Wheel Drive
New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS
Item Number Item Name MSRP MAP
Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL
PARTS CATALOG FOR SST STADIUM TRUCK RTR CAR
PARTS CATALOG FOR SST STADIUM TRUCK RTR CAR No.6714-F 1/10 4WD NITRO POWERED STADIUM TRUCK NITRO POWERED STADIUM TRUCK No.6714-F 1/10 4WD NITRO POWERED STADIUM TRUCK Features: 100% Factory assembled 2-Channel
#4016 KIT TOOLS SUPPLIED
#4016 4 =? A F H L A, O = E? 5 J H K J BH JIKIFA IE.=?J HO6A= + = H > B E > A H > K A = K E K I? H A M + I F I E J A + D = I I E = @ > = A @ I 9 E @ A > = J J A H O I JI.=?J HO6A= > K A J E J = E K JK
X-Maxx (Model ) Parts List
X-Maxx (Model 77076-4) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown.
Install steering rack assembly to chassis using 2-4-40 x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as Qty 2, 4-40 x 3/8 fhcs Qty 2, 6.4mm x 1.1mm blue aluminum spacer
OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909)
OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of
MR-4BCS Parts List (Updated 9/15/03)
4WD Offroad Kits MRBC-1S MR-4BCS Competition 4wd Buggy Kit $ 499.95 Chassis Parts ZS-001B Front Bumper 1 $ 3.75 ZS-002GB Graphite Main Chassis 1 $ 39.00 ZS-003UDS Upper Deck 1 $ 10.75 ZS-118 Battery Plate
RS-LM Parts List 1. GEAR DIFFERENTIAL/SOLID FRONT AXLE. The car can use either 2 differentials, front and rear or Solid Axle in the front.
RS-LM Parts List 1. GEAR DIFFERENTIAL/SOLID FRONT AXLE The car can use either 2 differentials, front and rear or Solid Axle in the front. Other differentials may work with the car. I used 3racing differentials
RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS
RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW
Replacement Parts List Part Number Description Price
TM Replacement Parts List Part Number Description Price LOSA1022 Front Axles for XX-T Wheels (GTX, NXT, XXX-T)...$6.00 LOSA1113 Front Shock Tower (Desert Truck)...$5.99 LOSA1118 Front Suspension Arms (Desert
:: Additional Your new RC12R6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):
:: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RCR6 Kit. Please take a moment to read through
:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):
8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to
INSTRUCTION MANUAL & REFERENCE GUIDE
INSTRUCTION MANUAL & REFERENCE GUIDE INTRODUCTION Serpent enters the small scale competition market with the S40, which like all our previous cars, has been designed to perform straight from the box. Made
=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01
NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005
=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way
NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims ()
Bag 1. Bag 1. Center Pivot. 3 Center Pivot Cap. Center Pivot
Battle Axe 2.0 1:10th Oval Weapon from Team CRC Assembly Manual 0 2. e Ax s tle Win s! t rd Ba s + bi C. ow CR T.Q Sn 0 20 servo and saver not included Part # 100 Calandra Racing Concepts 6785 Martin Street
1/8TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL
/8TH SCALE WD COMPETITION CAR INSTRUCTION MANUAL INTRODUCTION The Serpent 960 is the next evolution of Serpent s hugely-successful 90 lineage, combining ultimate performance into a single package. The
29066 29156 29153 29154 29003 29157 29003 29157 29153 29153 29157 29155 29153 29066 29157 29003 29157 29066 29003 29158 29153 Oil No. 5000 29154 29003 29003 29157 29153 29046 29153 29157 29153 29157 29046
Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit.
INSTRUCTION MANUAL SUPPLEMENTARY SHEET Use this NT1 2013 Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. New and Improved Parts All of these parts are
Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty:
Introduction Thank you for purchasing the Tekno RC SCT410 1/10th Scale Electric 4WD Competition Short Course Truck. The SCT410 represents the state-of-the-art in 1/10th Electric Short Course technology.
RJS2017 SPORTSMAN RACER KIT LESS ELECTRICS
RJS2017 SPORTSMAN RACER KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORTSMAN RACER KIT FOR OVAL RACING, DRAG RACING OR JUST FUN STREET BASHING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ
McDominator Team Kit Owner's Manual
McDominator Team Kit Owner's Manual Thank you for purchasing the McPappy Racing McDominator Team Kit. This manual will guide you through the assembly process. It is possible to take a kit and throw it
En Instruction Manual De Bauanleitung. Fr Manuel de montage
En Instruction Manual De Bauanleitung Fr Manuel de montage RTR Trophy Truggy Flux En De Fr Jp Vol.1 101875 Chassis Maintenance Chassis Wartung Entretien du châssis シャーシのメンテナンス 1 Gear Differential 101087
ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear
1 ASSEMBLY OF THE FRONT AND REAR BALL DIFF. 37145 40060 40060 2.6mm Nylon Nut 37110 35958 37132 2.6x6x1mm Washer 37148 Apply Grease 37120 (12 Pcs) Builds two differentials for front and rear. 38288 35958
NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty.
OWNER'S MANUAL NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty. Carefully read through all instructions to familiarize yourself with the parts,
1/8 RG PD1871 TRANS CASE/BULK HEAD SET,S3 PD1875 UNIV. REBUILD KIT,S3 PD1876 CLUTCH SHOE (3), 1/8 PD1877 FR SHOCK SET(2),S3
9279W AIR FILTER, 1/8 WHITE AN0747 FOAM FILTER (3), 1/8 PD1052 REAR BODY MOUNT PD1211 BODY SUPPORT SET 1/8 RG PD1242 1/8 CLUTCH BELL, 26MM 13T PD1795 TIRE W/FOAM RALLY, 1/8 PD1800 DIFFERENTIAL SET CENTER,
Bigfoot (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT
Tabella 1 Code CM-00001 Code R0001 R0002 R0003 R0004 R0005 R0006 R0007 R0008 R0009 R0010 R0011 R0012 R0013 R0014 R0015 R0016 R0017 R0018 R0019 R0020 R0021 R0022 R0023 R0024 R0025 R0026 R0027 R0028 R0029
Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan
Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly
TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm
TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend
INSTRUCTION MANUAL SUPPLEMENTARY SHEET
INSTRUCTION MANUAL SUPPLEMENTARY SHEET The T3R Raycer is based on the hugely-successful, race-winning T3 and as such the majority of spare parts and option parts are fully compatible between the two cars.
INSTRUCTION MANUAL INSTRUCTION MANUAL
INSTRUCTION MANUAL INSTRUCTION MANUAL Thank you for purchasing Pro-Line s PRO-Fusion SC 4 4! For Over 35 years, Pro-Line has designed and manufactured the best RC products in the world. This 1:10 scale
T-Maxx (4907) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. T-Maxx (4907) Parts List Air Filters 5262 Air filter
R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01
BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6
RJS2002 FUNNY CAR KIT LESS ELECTRICS
RJS2002 FUNNY CAR KIT LESS ELECTRICS THANKS FOR BUYING RJ SPEED S FUNNY CAR DRAG KIT. IT IS MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS REPEATEDLY AT HIGH SPEED. IT REQUIRES
FIRST, A WORD ABOUT THE NEW RC12LC
FIRST, A WORD ABOUT THE NEW RC12LC CONGRATULATIONS!! You have purchased the production version of the car that Masami Hirosaka used to win the 1996/97 IFMAR 1/12 scale On Road World Championships. This
Stampede (Model ) Parts List
Stampede (Model 36054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.
Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE
1:12 SCALE ON ROAD CAR KIT
2 SCALE ON ROAD CAR KIT INSTRUCTION MANUAL OR KIT #4015 SAVE VE THIS MANUAL! Use with current catalog for future, hassle-free re-ordering of parts. 1998 Associated Electrics, Inc. - 9? D = I I EI @ A I
X 3mm Flat Head Screw. Adjustment Hole x15x4mm Ball bearing. M2x10mm Hex Screw. Spring. Clutch Shoe. Ball.
INSTRUCTIONS #35017 NITRO OB-4 1/10 SCALE 2-SPEED TRANSMISSION SET (Shoe Type) * This professional two speed transmission is only for Nitro OB-4 1/10 Scale OB4 Gas Car Kits. Nitro Ob4 ASSEMBLY OF THE TWO
Dart 2.6 Team Kit Owner's Manual
Dart 2.6 Team Kit Owner's Manual Thank you for purchasing the McPappy Racing Dart 2.6 Team Kit. (Note, many of these pictures still reflect the Dart 2.5. The very last section shows the 2.6 updates.) This
Dart 2.0 Owner's Manual
Dart 2.0 Owner's Manual Thank you for purchasing the McPappy Racing Dart 2.0. This manual will guide you through the assembly process. It is possible to take a kit and throw it together in an hour. But
1/10TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL
/0TH SCALE WD COMPETITION CAR INSTRUCTION MANUAL INTRODUCTION Rising to the challenge of improving upon their racewinning Serpent 70, the engineers at Serpent once again came up with a formidable challenger,
Nitro Slash (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Nitro Slash (Model 44056-3) Parts List Air Filters 5262 Air filter and pre-filter
PARTS CATALOG FOR UNO F1 RTR CAR
PARTS CATALOG FOR UNO F1 RTR CAR No.6716 1/10th Scale 2WD NITRO POWERED 2WD FORMULAR 1 CAR F1 UNO SPORT ARTR/RTR PARTS LIST PD1657 FR HEX DRIVE BUSHING PD0140 CLUTCH SHOES PD0270 CLUTCH BELL BAG / 4T
#0980 Intimidator 7 Direct Drive Racing Kit
#0980 Intimidator 7 Direct Drive Racing Kit 1 Thank you for purchasing the Intimidator 7! Within this kit you will find a race winning car with over 30 years of Custom Works design and quality. The latest
Scan courtesy of Vintagelosi.com
r l OWNER'S MANUAL Scan courtesy of Vintagelosi.com Carefully read through all instructions to familiarize yourself with the parts, construction, techniques, and tuning tips outlined in this manual, Being
Pinion Gear and Setscrew
XRAY T1 Factory Kit 2005 The new XRAY T1 Factory Kit '05 (T1FK'05) is the 5th generation of XRAY's extremely successful T1 family of 1/10-scale on -road electric touring cars. The T1FK'05 is a large evolutionary
NOT INCLUDED CAR BATTERY TOOLS RECOMMENED(NOT INCLUDED) WHAT S IN THE BOX
DIMENSION SCALE : /8 HEIGHT : 80mm FRONT TYRE : ø85mm x 35mm(width) REAR TYRE : ø85mm x 40mm(width) LENGTH : 50mm WIDTH : 3mm WHEELBASE : 80mm CAR BATTERY NOT INCLUDED TOOLS RECOMMENED(NOT INCLUDED) WHAT
Stampede (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Stampede (Model 36054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
T-Maxx: TRX 3.3, TQi Radio (4907) Parts List
T-Maxx: TRX 3.3, TQi Radio (4907) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Air
RJS WB ELECTRIC T/F DRAGSTER KIT LESS ELECTRICS
RJS2006 30 WB ELECTRIC T/F DRAGSTER KIT LESS ELECTRICS THANKS FOR BUYING THIS RJ SPEED DRAGSTER KIT. IT IS MADE FOR STRAIGHT LINE DRAG RACING AND MAY BE BROKEN IF RUN INTO SOLID OBJECTS REPEATEDLY AT HIGH
T-Maxx (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. T-Maxx (Model 49077-3) Parts List Air Filters 5262 Air filter and pre-filter inserts,
Introduction. Contents
Instruction Manual Introduction Congratulations on your newly acquired Serpent 70. You have chosen the highest quality, ultimate-performance 00mm racecar that is easy to use, assemble, and set up. As part
E-Revo (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. E-Revo (Model 56036-4) Parts List Bearings & Bushings 4609 Ball bearings (5x10x4mm)
Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty:
Introduction Thank you for purchasing the Tekno RC SCT410.3 1/10th Scale Electric 4WD Competition Short Course Truck. The SCT410.3 is an improved version of the already great SCT410. We are always working
Rustler (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
2030 OUTLAW SPRINTER HARDWARE I.D. BUTTON HD. CAP SCREW BAG H1 CHASSIS KIT BAG H3 HARDWARE BAG L2 REAR AXLE PARTS BAG L4 FRONT TIRES
THANKS FOR BUYING THE RJ SPEED OUTLAW SPRINTER KIT. IT IS COMPLETE LESS ELECTRICS, AND MADE FOR CARPET OR PAVEMENT RACING. IT REQUIRES A 540 OR 550 SIZE MOTOR, 4 OR 6 CELL BATTERY PACK, TWO CHANNEL RADIO
Telluride 4X4 (Model ) Parts List
Telluride 4X4 (Model 67044-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings
Pan Car Setup and Troubleshooting
Pan Car Setup and Troubleshooting Problems can come up in the midst of competition. Either the car is not handling properly on the track or there are problems with equipment. Troubleshooting problems should
Rustler (Model ) Parts List
Rustler (Model 37054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings
AEV30308AA Last Updated: 05/31/18. 4 DUALSPORT sc SUSPENSION system for RAM 1500 air ride standard and rebel INSTALLATION GUIDE
AEV30308AA Last Updated: 05/31/18 4 DUALSPORT sc SUSPENSION system for RAM 1500 air ride standard and rebel INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND
1/10 Scale 4WD 200mm Gas Power Touring Car
1/10 Scale 4WD 200 Gas Power Touring Car STS PRO 10 Instruction Manual DIMENSIONS Length: 390 Width: 200 Height: 120 Weight (ready to run): About 1800g DRIVETRAIN Type: 3-belt 4WD Transmission: 2-speed
ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1
ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B4 TT RS-1 2003-2006 Associated Electrics, Inc. FINAL ADJUSTMENTS RADIO ADJUSTMENTS Use the following
BEFORE YOU START SAFETY PRECAUTIONS IMPORTANT NOTES GENERAL. carefully and fully understand the instructions before beginning assembly.
BEFORE YOU START The X12 is a high-competition, high-quality, 1/12 pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not
T-Maxx with TRX 2.5R Parts List
T-Maxx with TRX 2.5R Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Air Filters 5260
PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK
PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK 1/8 4WD NITRO MONSTER TRUCK Features High power and reliable.21 size engine that has two different starting methods (pull start
XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits
PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18
1:8 SCALE GAS POWERED OFF-ROAD BUGGY
Instruction RTR Manual 1:8 SCALE GAS POWERED OFF-ROAD BUGGY PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS
Replacement Parts List Part Number Description Price
Replacement Parts List Part Number Description Price 48 Pitch Pinion Gear, 12T...$4.99 LOSA4006 Antenna Tube and Set Screw...$1.50 LOSA4015 Battery Foam...$2.50 LOSA5224 Silicone Shock Oil, 30 wt, 2 oz...$3.99
INSTRUCTION MANUAL & REFERENCE GUIDE
INSTRUCTION MANUAL & REFERENCE GUIDE Introduction Serpent likes to welcome you to the fascinating world of rc car racing. You are now part of the worldwide network of Serpent drivers, which gives you access
Monster Jam Replica (Model 3602) Parts List
Monster Jam Replica (Model 3602) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings
TOWC Universal Drive Shaft Set...15,16 x2pcs. TOWC Engine Mount...98 x1pc. TOWC Dogbone (Rear)...19 x1pc
Replacement Parts Stock # Description Included DTXC5...5x0mm Bearing...x2pcs DTXC5...x6mm Bearing...x2pcs DTXC6...mm Bearing...x2pcs TOWC6032...Air Filter Set...02,03,0,05 xpc TOWC600...Rear Axle... xpc
Maverick Number Maverick Description X REF MV12401 Maverick Blackout MT 1/5 Scale 4WD Petrol Monster Truck RTR XXX MV24000 Main Chassis Plate
Maverick Number Maverick Description X REF MV12401 Maverick Blackout MT 1/5 Scale 4WD Petrol Monster Truck RTR XXX MV24000 Main Chassis Plate (Blackout MT) STD MV24001 Front Shock Absorber 2 Pcs (Blackout
Rustler 4X4 (Model ) Parts List
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)
OWNER'S MANUAL. Take your time and pay close attention to detail. Keep this manual for future reference. MADE IN THE UNITED STATES OF AMERICA
OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of