Note: For Special Orders a 50% deposit is required with no returns. Valid from 1st March 2010

Transcription

1 Item Page No Core Drills 2-7 Core Drill Accessories 2 Bi Metal Holesaws 8 Machined Countersinks 9 TCT Holesaws TCT Holesaw Accessories 13 XE Step Drills and Conical Drills 14 & 15 HSS Step Drills 16 HSS Countersinks 17 Counterbores 18 Bevelling Machine 19 Powerbor Magnetic Drilling Machines Carbide Burrs Valid from 1st March 2010 Note: For Special Orders a 50% deposit is required with no returns Quality Cutting Tools reserves the right to correct, modify, and change, without prior notice, products and pricing in this catalogue Quality Cutting Tools - March 2010 Pg: 1

2 Karnasch Core Drills Optimal Good lll ll Steel Stainless Steel Aluminium < 10% Si Grey Cast Iron Bisalloy 360 Bisalloy 500 Railtracks Possible l Gold Line Core Drills Gold-Tech surface treated core drills for a longer tool life are our minium standard level. These core drills are already high-tech without any compromises. lll ll ll Blue Line Core Drills Blue Line coated core drills are our standard quality level. For more liftime and for use with difficult materials. lll ll lll lll ll lll Blue Line Pro Core Drills Blue Line Pro core drills are our supreme quality level. When you need the longest possible lifetime without any compromises. lll lll lll lll lll ll lll Hard Line Core Drills Almost all Karnasch TCT Core Drills come with a sophisticated 3-cut geometry which results in increased tool life, smooth cutting action and excellent cutting capacity. Hard Line Core Drills are exclusively equipped with Sandvik carbide teeth. lll lll lll lll lll lll lll Mini Line Core Drills Silver core drills are specially designed for our Mini Line range. ll l All Karnasch Core Drills are fitted with a universal shank fitting all machines with a Weldon Shank such as: Alfa, BDS, Bux, Ruko, Magnetor, Euroboot, Rotabroach etc, and Alfra Quick-Change shank system. Standard on all Karnasch Core Dills is Step Hardening for tougher drilling with more flexibility. Core Drills for Fein Magnetic Base Drills only, can be supplied as a special order. Phone for more details. Pg: 2 Quality Cutting Tools - March 2010

3 Mini Line Core Drill Diameter Diameter $ $ $ $ $ $ $ $ $ $ $35.00 Order codes: Core Drills eg: for 14mm Ejector Pin $9.50 Centre Drill $36.90 Universal 19mm (3/4 ) adapter + suitable ejector pin for application on all core drilling machines with Weldon 19mm (3/4 ) holder $34.40 Holder for Ejector Pin Holder for Drill $ $ $ ,10, 12, 13, 14, 16, 18, 20, 22, 24, 25mm , , , , (punch), (allen key) $11.00 To suit above Adaptor Accessories No Internal Cooling Internal Cooling Exchange using 2 Grub Screws Quick Change Exchange using 2 Grub Screws Quick Change Part No Morse Taper Shank List Price Weldon 19mm $ Weldon 19mm $ Weldon 32mm $ Weldon 19mm $ Weldon 19mm $ Weldon 19mm $ Weldon 19mm $ Weldon 32mm $ Weldon 32mm $ Weldon 19mm $ Weldon 19mm $ $ Morse Taper 3 Weldon 19mm Extra long tool holder with automatic coolant supply especially for all extra long core crills like the series: Gold Line mm, Blue Line mm, Hard- Line mm with universal shank 19mm (3/4 ). With this tool holder you don t need to change the twopiece ejector pins. You can drill as deep as 110mm in one working process. A range of extensions and adaptors are also available in stock. Please phone for more information. Quality Cutting Tools - March 2010 Pg: 3

4 GOLD LINE BLUE LINE BLUE LINE Pro Cut Depth 30mm 55mm 80mm 110mm Diameter u u u u 12 $50.00 $ $50.00 $ SPO $50.00 $ $51.00 $ $51.00 $ SPO $51.00 $ $52.90 $ $52.90 $ $52.90 $ $55.50 $69.20 $ $ $55.50 $69.20 $ $ SPO $55.50 $ $58.30 $72.20 $ $ $58.30 $72.20 $ $ $69.20 $82.10 $ $ $69.20 $82.10 $ $ $71.80 $86.70 $ $ $71.80 $86.70 $ $ $76.10 $91.50 $ $ SPO $76.10 $ $76.10 $91.50 $ $ $82.10 $99.70 $ $ $82.10 $99.80 $ $ $85.90 $ $ $ $88.80 $ $91.90 $ $ $ $91.90 $ $ $ $95.10 $ $95.10 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Pg: 4 Quality Cutting Tools - March mm / 3/4 Shank Cut Depth 30mm 55mm 80mm 110mm Diameter $68.20 $ $68.20 $ $69.90 $ $69.90 $ $71.80 $ $71.80 $ $73.60 $89.70 $ $ $73.60 $89.70 $ $ $77.10 $93.30 $ $ $78.90 $95.10 $ $ $89.30 $ $ $ $90.00 $ $ $ $92.50 $ $ $ $92.50 $ $ $ $96.70 $ $ $ $96.70 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Ejector Pins Part No. Price To Suit Dimensions $ u, , x77mm $ u, , , x102mm $ u, x130mm $ u, x160mm $ (x18-60mm) 7.98x105mm $ (x61-150mm) 7.98x118mm $ x167mm 19mm / 3/4 Shank Cut Depth 30mm 55mm Diameter $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Application: Insert piece 1 into the core drill shank. Push piece 2 onto part 1. Drill as deep as 50mm cutting depth. Then remove piece 2 and continue cutting $64.50 To suit u, Core Drill $72.30 To suit u, Core Drill 19mm / 3/4 Shank

5 HARD LINE Tungsten-Carbide Tipped Cut Depth 55mm 110mm Diameter $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, $1, $1, $1, $1, $2, $2, $2, $2, mm / 3/4 Shank 32mm Shank GOLD LINE Imperial Cut Depth 30mm 55mm 80mm Diameter mm u Price u Price u Price 7/ u005 $ u005 $ / u010 $ u010 $ / u015 $ u015 $ / u020 $ u020 $ / u025 $ u025 $ u025 $ / u030 $ u030 $ u030 $ / u035 $ u035 $ u035 $ / u040 $ u040 $ u040 $ / u045 $ u045 $ u045 $ u050 $ u050 $ u050 $ / u055 $ u055 $ u055 $ / u060 $ u060 $ u060 $ / u065 $ u065 $ u065 $ / u070 $ u070 $ u070 $ / u075 $ u075 $ u075 $ / u080 $ u080 $ u080 $ / u085 $ u085 $ u085 $ / u090 $ u090 $ u090 $ / u095 $ u095 $ u095 $ / u100 $ u100 $ u100 $ / u105 $ u105 $ u105 $ / u110 $ u110 $ u110 $ / u115 $ u115 $ u115 $ / u120 $ u120 $ u120 $ / u125 $ u125 $ u125 $ u130 $ u130 $ u130 $ / u135 $ u135 $ u135 $ Special Order Only Item HARD LINE Imperial Tungsten-Carbide Tipped Cut Depth 40mm 55mm 80mm Diameter mm Price Price Price 1/ $ $ / $ $ / $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ / $ $ $ $ $ $ / $ $ $ Special Order Only Item Quality Cutting Tools - March 2010 Pg: 5

6 6 Piece Kit 25 Piece Kit Contains: Diameters 14, 16, 18, 20, 22, 26mm or 9/16, 5/8, 3/4, 16/16, 15/16, 1-1/ suitable ejector pins Contains: Diameters 12-36mm or 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 1-5/ suitable ejector pins 39 Piece Kit Contains: Diameters 12-50mm + 4 suitable ejector pins Imperial Kits are special order only items Type Cutting Depth Pieces Part No. Price $ mm $ Gold $ $ mm $ $ $ mm $ Blue $ $ mm $ $ Blue Line Pro 30mm $ $ mm $ $ $ Hard Line 55mm $ $ Piece $66.60 Empty Core Drill Kit & 39 Piece $ Empty Core Drill Kit Pg: 6 Quality Cutting Tools - March 2010

7 Recommended speed - Core Drills Gold Line, Blue Line, Blue Line Pro ,201313, u, u, , , , u Material Mild Steel Stainless Steel Cast Iron Bisalloy 360 Bisalloy 400 Aluminium Diam mm rpm rpm rpm rpm rpm rpm Recommended speed for T.C.T. Core Drills Items: Material Mild Steel Stainless Steel Cast Iron Bisalloy 360 Bisalloy 400 Aluminium Diam mm rpm rpm rpm rpm rpm rpm Quality Cutting Tools - March 2010 Pg: 7

8 Bi-Metal Hole Saw Solid Super Quality HSS 8% Cobalt Steel Applications: TPI Karnasch bimetal hole saws are shipped in heavy version with solid base plate. Reinforcement plates are no longer necessary. We only ship high-alloyed HSS Co8 quality with variable tooth pitch for the maximum possible cutting ability and durability. Order codes: Bi-Metal Hole Saws eg: for 40mm Diam mm Inch Price Diam mm Inch Price Diam mm Inch Price 14 9/16 $ /4 $ /8 $ /8 $ /16 $ /4 $ /16 $ /8 $ /8 $ /4 $ $ $ /32 $ /16 $ /8 $ /16 $ /8 $ /4 $ /8 $ /4 $ /8 $ /16 $ /16 $ /2 $ $ /8 $ /4 $ /16 $ /2 $ $ /8 $ /16 $ $ /16 $ /8 $ /2 $ /4 $ /16 $ /4 $ /16 $ /4 $ $ /8 $ /8 $ /3 $ /16 $ $ /8 $ /2 $ /8 $ /8 $ /16 $ /4 $ /16 $ /8 $ /8 $ /4 $ /16 $ /2 $42.10 Shank x9mm for hole saws:x14-30mm $21.20 HSS spare pilot pin suitable for all shanks $9.50 Spare Ejector Pin $ mm Extension for Article $22.10 Part No Description Price Shank x11mm for hole saws:x32-152mm $ SDS-PLUS shank for hole saws:x32-52mm $ SDS-PLUS shank for hole saws:x14-30mm $ Shank x12.7mm for hole saws:x32-210mm $ $ General Purpose hole saw kit Standard (6 hole saws) Contains: x19, 22, 35, 68, 70, 76mm Including Shanks: & $ General Purpose hole saw kit Standard (9 hole saws) Contains: x16, 19, 22, 29, 35, 44, 52, 57, 67mm Including Shanks: & $ General Purpose hole saw kit Professional (12 hole saws) $ General Purpose hole saw kit Royal (19 hole saws) Contains: x16, 19, 20, 22, 24, 25, 27, 29, 30, 32, 35, 38, 40, 44, 51, 57, 60, 68, 76mm Including Shanks: & Counter Displays and Wall Displays Available. Price on Application Contact us to discuss your requirements Pg: 8 Quality Cutting Tools - March 2010 Contains: x16, 19, 22, 25, 29, 32, 35, 38, 44, 51, 64, 76mm Including Shanks: &

9 Operating Suggestion Bi Metal Holesaw Approved eye protection and gloves must be worn while using these tools. Sawing Speeds: Due to the varying dimensions and types of materials, speeds are subject to change. See table below for suggested speeds. Lubrication: For longer saw life and cleaner cutting, use a good grade of cutting oil for mild steel, tool or stainless steel, copper, brass, bronze and aluminium. For cast iron used compressed air. Recommendation for use: Clear chips frequently to prevent them clogging in saw teeth, slowing cut and overheating blade. Suggested Speeds x mm x inch Mild Steel Tools/Stainless Bronze, Copper, Cast Iron Steel Brass Aluminium Wood /16-11/ /4-13/ / /16-1.3/ /4-1.3/ /16-1.9/ /8-1.3/ / /16-2.3/ /4-2.3/ /2-2.5/ /16-2.7/ / /8-3.5/ / /8-4.3/ / / Countersinks $91.50 Countersinks with 3 cutting edges in HSS-XE steel quality with universal shank 19mm - 3/4, 90 g $ Special Steel/Stainless, Bisalloy Unalloyed Steel Aluminium $ $ Non-Ferrus Metals Plastics, Laminates Quality Cutting Tools - March 2010 Pg: 9

10 Power Max Special Steel/Stainless Unalloyed Steel Aluminium Non-Ferrus Metals Plastics Sandwich Materials a Order codes: Power Max10 Holesaw eg: for 20mm Complete eg: for 20mm cutter only a020 Pg: 10 Quality Cutting Tools - March 2010 Power-Max hole saws with Easy-Change quickchange shank system for almost unlimited use on hand drills, core drilling machines, drill presses, radial drill, turning centre, etc. Diameter Diameter Diameter Diameter Easy Cut 14 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $62.00 Carbide hole saw Powermax 10 Easy-Cut. The flat-cut hole saw of the next generation. Extra strong body material. Up to 12mm cutting depth possible. The low cutting width (2.2mm) enables boreholes up to 120mm with hand drills. All diameters with interchangeable shank. Diameter a Diameter a Diameter a Diameter a 14 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $46.10

11 Power Max Allround Power-Max hole saws with Easy-Change quick-change shank system for almost unlimited use on hand drills, core drilling machines, drill presses, radial drill, turning centre, etc. Diameter Diameter Diameter $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Carbide hole saw Powermax 60 Allround. For electricians, sanitary and heating installers, carpenters and cabinet makers, carpentries, stairway and kitchen studios. The ideal solution for almost any material. Compared with commercial models the higher number of teeth guarantees clean cutting edges as well as longer durability. Soft wood, hard wood, & exotic wood across the grain. Wood with inclusions like nails, clips, concrete residue. Blockboards, Plywood, Fibre boards. Chipboard and hardboard without laminate. Panel materials plastic laminated. Panel materials with veneer a Cemented fibre boards & compound boards, Mineral wool and Plasterboards. Decorative boards, hardpaper, hardfibre. Veneers. Plastics, Plexiglass, Acrylics, Duro-and- Thermoplastics. compounds and sandwich materials, recycled materials. Autoclaved aerated concrete blocks. Diameter a Diameter a Diameter a 25 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Order codes: Power Max60 Holesaw eg: for 20mm Complete eg: for 20mm cutter only a020 Quality Cutting Tools - March 2010 Pg: 11

12 Power Max Heavy-Duty Power-Max hole saws with Easy-Change quick-change shank system for almost unlimited use on hand drills, core drilling machines, drill presses, radial drill, turning centre, etc. Special Steel/Stainless Unalloyed Steel Diameter Diameter Diameter Diameter $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Carbide hole saw Powermax 30 Heavy-Duty. The deep-cutting hole core saw of the next generation. Extremely strong body material. Up to 30mm cutting depth possible. Thanks to the extremely strong body material and the cutting width (4.0mm) it is applicable for up to 40mm on hand drills. In case it should be more than 40mm we recommend the use of core drilling machines/drill press. Aluminium Non-Ferrus Metals Plastics Sandwich Materials a Order codes: Power Max30 Holesaw eg: for 20mm Complete eg: for 20mm cutter only a020 Diameter a Diameter a Diameter a Diameter a 14 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Pg: 12 Quality Cutting Tools - March 2010

13 For Hand Drills x mm $ x mm $ , , Use without hammer drill function. Accessories for Powermax x mm $ $ $ $ , , x mm $ , $ For all materials but gas concrete stones $11.20 For drilling into gas concrete stones $8.10 x mm $ , For Drill Presses Morse Taper , , $65.90 x mm Morse Taper $77.50 Morse Taper 3 x mm $ Morse Taper 3 x mm $ , , x mm $ $ For all materials but gas concrete stones $ For drilling into gas concrete stones $ For Core Drilling Machines Adaptor suitable for Core Drilling Machines:- Alfra- Rotabest + Alfra Rota-Quick, BDS+BDS Keyless, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magnetor, Metallkraft, Promag, Rotabroach, Ruko Easy Lock, Universal $40.70 x mm , Adaptor suitable for Core Drilling Machines:- Alfra- Rotabest + Alfra Rota-Quick, BDS+BDS Keyless, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magnetor, Promag, Rotabroach, Ruko, Universal $50.40 x mm , Adaptor suitable for Core Drilling Machines:- Fein Quick-In x mm $ , Adaptor suitable for Core Drilling Machines:- Alfra-Rotabest, BDS, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Metallkraft, Promag, Rotabroach, Ruko $ x mm Adaptor suitable for Core Drilling Machines:- Alfra-Rotabest, BDS, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Metallkraft, Promag, Rotabroach, Ruko $ x mm $ $ Quality Cutting Tools - March 2010 Pg: 13

14 Karnasch Step Drills The patented Blue-Dur coating significantly increases durability. Absolutely recommendable for difficult materials like special steels/stainless steels or in case cooling lubricants can not really be used. A 35gspiral completely made of solid material ensures: a. Easy cutting b. No getting stuck in the material c. Low chipping forces d. Less flash build-up e. Much higher durability All Karnasch step drills.conical drills are made of high-alloyed HSS XE steel for a hardness of up to 68 HRC and highest wear resistance. All Karnasch sept drills/conical drills are shipped complete with outlasered diameter and speed information. Karnasch High-Tech step drills with spiral Maximum Cutting Depth 5mm $92.20 Maximum Cutting Depth 4mm $ Maximum Cutting Depth 4mm $ Maximum Cutting Depth 4mm $ Karnasch XE steel setp drills with spiral and BLUEDUR coating cover the entire specrum of body openings according to the new M12-M40 standard. The step drills have a short drill step (3mm or 4mm) for cable outlets in thin-walled bodies (wall thickness max. 3mm as well as 4mm) and a long drill step (6mm) for tapping drill holes in distribution boxes (wall thickness max. 5.5mm) Maximum Cutting Depth 6mm xmm M12x1.5 M16x1.5 M20x1.5 M25x1.5 M32x1.5 M40x1.5 Maximum Cutting Depth 4mm xmm M12x1.5 M12x1.5 M16x1.5 M20x1.5 M25x1.5 M32x $ Pg: 14 Quality Cutting Tools - March 2010

15 Karnasch High-Tech conical drill with spiral $ $ Karnasch High-Tech conical drill $ $ $ $ Karnasch Step Drill/ Conical Drill Sets Complete Step Drills Set Content xmm $ Basic Step Drill Set Content xmm $ Cable Connection Step Drill Set Content xmm $ Basic Conical Drill Set Content xmm $ Hi-Tech Conical Drill with Spiral Set Content xmm $ Quality Cutting Tools - March 2010 Pg: 15

16 Designed for industrial applications. Each step produces accurate, parallel holes with a small clearance on the nominal diameter. The maximum material thickness is determined by the length of step (if the work piece can be reversed multiply thickness by 2). For use in industrial power tools or pedestal drilling machines Metric Part # Drill Size (mm) Max. Drilling Speed RPM Chuck List Mat Size Non- Price Thick Ferrous Ferrous MC1M mm 6.5mm $43.86 MC2M mm 10mm $62.04 MC3M mm 13mm $93.88 MC4M mm 6.5mm $47.35 MC5M mm 10mm $73.75 MC6M mm 10mm $58.47 MC7M mm 10mm $58.97 MC8M* mm 13mm $71.25 MC9M* mm 13mm $ MC10M mm 13mm $ MC11M mm 10mm $67.65 MC mm 13mm $ Imperial Part # MC1E MC2E MC3E MC4E MC5E Drill Size (mm) 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/ /16 1.1/8 3/4 13/16 7/8 15/ /16 1.1/8 1.3/16 1.1/4 1.5/16 1.3/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 Max. Chuck Mat Size Thick Drilling Speed RPM Non- Ferrous Ferrous List Price 1/8 1/ $ /8 3/ $ /8 3/ $ /8 1/ $ /8 3/ $67.68 MC6E 3/16 1/4 5/16 3/8 7/16 1/2 3/8 1/ $47.00 MC7E 3/16 1/4 5/16 3/8 7/16 1/2 1/8 1/ $34.19 MC8E* 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1/8 1/ $ /16 7/8 15/ /16 1.1/8 MC9E* 1.3/16 1.1/4 1.5/16 1.3/8 1/8 1/ $ Part # Part # Drill Size (mm) Variable sizes of larger diameters can now be drilled without the need for a pre-drilled hole, with smooth multi-flute action ensuring that clean round holes are produced. For drilling holus up to 4mm thick in most materials and incorporating popular diameters for PG, Conduit, BS pipe and automotive fittings. Trepanning Action Multicut Max. Chuck Mat Size Thick Drilling Speed RPM Non- Ferrous Ferrous List Price TMC3040 4mm mm $ TMC4050 4mm mm $ TMC5060 4mm mm $ Approx start Diam Drill Size (mm) Max. Chuck Mat Size Thick Drilling Speed RPM Non- Ferrous Ferrous List Price MC1625 6mm holes for conduit entry 3.5mm 10mm $66.23 MC mm holes for conduit entry 3.5mm 13mm $90.22 Drills clearance holes for PG fittings PG MCPG 6.5mm also mm 13mm $92.14 pushbutton holes Drills clearance for PG fittings PG7 9 MCPG 6.5mm also mm pushbutton holes 3mm 13mm $ Drills clearnace holes to take 3/8 7/16 3/4 screw MC521 5mm sizes for Greenlee standard punches, slug buster punches and slug 4mm 10mm $57.25 MC3/4 KO MC1KO Special Application Multicut splitter punches Drills clearance 5.5mm holes for 7/8 (1/2 3.5mm 10mm $67.65 KO) 1.1/8 (3/4 KO) Drills clearance holes for 7/8 (1/2 5.5mm KO) 1.1/8 (3/4 KO) 3.5mm 10mm $ /32 (Oil Tight) 1.1/4 1.3/8 (1 KO) TiN- Titanium Nitride Coated Multicut Part # Drill Size (mm) Max. Drilling Speed RPM Chuck List Mat Size Non- Price Thick Ferrous Ferrous MC1MTiN mm 6.5mm $87.72 MC2MTiN mm 10mm $ MC3MTiN mm 13mm $ Multicut Sets Part # Contains Tool Numbers Range List Price MCS1 MC1M, MC2M, MC3M 4-30mm $ MCS1TiN MC1MTiN, MC2MTiN, MC3MTiN 4-30mm $ MCS2 MC1E, MC2E, MC3E 1/8-1.1/8 $ Pg: 16 Quality Cutting Tools - March 2010

17 COUNTERSINK 5 Flute The 90 Angle together with the 0 rake angle makes this tool suitable for countersinking ferrous metals, hard plastics and wood. Overall Shank Shank List Part # Diameter Length diam Lenth Price CS5 8 8mm (5/16 ) 35mm 5mm 20.5mm $16.72 CS mm (5/8 ) 39mm 6.35mm 20.5mm $17.93 CS mm (5/8 ) 52mm 8mm 32mm $27.36 CS mm (3/4 ) 58mm 10mm 35mm $ Flute Morse Taper Shank Head Nominated Shank List Part # Diameter Length Diam Price MT CS mm 85mm No1 MTS $95.66 MT CS mm 100mm No2 MTS $ MT CS mm 106mm No2 MTS $ MT CS mm 112mm No2 MTS $ MT CS mm 140mm No3 MTS $ Flute Countersink Kit 3 Flute To DIN 335C 90 Angle The positive rake angle means that a quick cutting action together with a chatter-free operation is possible when Countersinking both ferrous and non-ferrous metals, hard and soft plastics. Nominated Shank List Part # Diameter Length Diam Price CS mm 45mm 5mm $22.03 CS mm 50mm 6mm $24.83 CS mm 50mm 6mm $31.30 CS mm 56mm 8mm $37.60 CS mm 60mm 10mm $54.09 CS mm 63mm 10mm $66.73 CS mm 67mm 10mm $91.13 CS mm 71mm 12mm $ CS mm 71mm 12mm $ Part # Kit Contains List Price CS5 K1 CS5 8, CS5 12, CS5 16, CS5 20 $ Flute Countersink Kit HSS Hole Type Deburring Cutters The arrangement of the through hole in relation to the precision-ground head results in a clean-cutting chatter-free tool for deburring and chamfering a wide range of materials at acceptable production speeds. Chip clearance is excellent and therefore makes these tools particularly suitable for soft alloys such as aluminium and brass, as well as all ferrous metals. Hole type deburring cutters are relatively simple to resharpen by grinding the cutting face inside the hole. 90 Angle Part # Kit Contains List Price CS3 S1 CS3 6, CS3 8, CS3 10, CS3 12, CS3 16, CS3 20 $ Hole Type Deburring Cutter Kit Overall Shank Shank List Part # Range Length diam Lenth Price DC mm 45mm 6mm 32mm $21.00 DC mm 48mm 8mm 30.5mm $27.07 DC mm 65mm 10mm 37.5mm $45.89 DC mm 84mm 12mm 48mm $80.85 DC mm 102mm 15mm 56.5mm $ DC mm 115mm 15mm 55.0mm $ DC mm 127mm 15mm 60.5mm $ Part # Kit Contains List Price DC S1 DC 25, DC 510, DC 1015, DC 1520 $ Quality Cutting Tools - March 2010 Pg: 17

18 COUNTERBORES Plain Shank Solid type with integral pilot, Manufactured to BS 328 PART 5/ISO DIN 373 for use in chucks or collets. Morse Taper Shank For use in Morse taper sockets. Detachable pilot type. BS 328 PART 5/ISO DIN375/1868 Normal Nominal Shank Overall List Part # Cutting Diam Pilot Diam Diam Length Price M3 P 6.00mm 3.4mm 5.0mm 71mm $50.50 M3.5 P 6.50mm 3.9mm 5.0mm 71mm $50.50 M4 P 8.00mm 4.5mm 5.0mm 71mm $42.50 M5 P 10.00mm 5.5mm 8.0mm 80mm $57.00 M6 P 11.00mm 6.6mm 8.0mm 80mm $62.00 M8 P 15.00mm 9.0mm 12.5mm 100mm $65.00 M10 P 18.00mm 11.0mm 12.5mm 100mm $74.50 M12 P 20.00mm 14.0mm 12.5mm 100mm $90.00 Counterbore Pilot Mt Normal Part # Cutting Diam Length List Nominal Spigot List Shank Price Diam Diam Price No M8 T 15mm 132mm 2 $ mm 4mm $27.47 M10 T 18mm 140mm 2 $ mm 5mm $28.66 M12 T 20mm 140mm 2 $ mm 5mm $33.16 M14 T 24mm 150mm 2 $ mm 6mm $33.97 M16 T 26mm 180mm 3 $ mm 8mm $35.16 M18 T 30mm 180mm 3 $ mm 8mm $46.61 M20 T 33mm 190mm 3 $ mm 10mm $47.12 M22 T 36mm 190mm 3 $ mm 10mm $61.49 M24 T 40mm 190mm 3 $ mm 10mm $63.30 Screwed Shank Solid type with integral pilot. For use in Clarkson type holder. Counterbore Sets Normal Nominal Shank Overall List Part # Cutting Diam Pilot Diam Diam Length Price M4 S 8.00mm 4.5mm 6.0mm 65.0mm $49.52 M5 S 10.00mm 5.5mm 6.0mm 70.0mm $53.89 M6 S 11.00mm 6.6mm 6.0mm 76.0mm $58.57 M8 S 15.00mm 9.0mm 10.0mm 87.3mm $61.49 M10 S 18.00mm 11.0mm 10.0mm 89.0mm $70.29 M12 S 20.00mm 14.0mm 12.0mm 108.0mm $84.93 Part # Shank MContains List Price CB S1 Plain M3 P, M4 P, M5 P, M6 P, M8 P, M10P $ CB S2 Screwed M4 S, M5 S, M6 S,M8 S, M10 S $ Pg: 18 Quality Cutting Tools - March 2010

19 Compact and handy design Powerful 1100 Watt motor $ Variable rotation speed Soft Start approach Easy to use Lightweight Manoeuvrable The small milling head can reach everywhere accurate and continuously variable adjustablity Burr-free ground welding angles Variable rotation speed Perfect Radius 2,5 angles Grinding welding angles, even in difficult positions Making a countersink Perfect round finish R2,5 profile is only a matter of seconds! Quality Cutting Tools - March 2010 Pg: 19

20 The LKF.450/2 machine is perfectly suited for making welding angles, to countersink drilled holes and to de-burr material. The Euroboor bevelling machine weighs a mere 4.7kg, making it very user-friendly and the ergonomic grip keeps it well handled. Thanks to the variable adjustable speed, this machine s not only suitable for regular steel, but also for materials such as stainless steel and aluminium. It is driven by a powerful 1100 Watt motor, which is equipped with a soft-start feature. LKF.450/2 machines come standard with a 45 gmilling head, including 2 high-quality cutting plates which can be used on 3 sides by re-positioning them. You can upgrade your machine with both 30 gand Radius 2.5 milling heads. Cutting depth is accurate and continuously variable adjustable. 45g LKF.450/2 Voltage 115v/60hz and 230b/50hz Capacity 1100 Watt Rotational Speed Variable /min (-1) Angle Milling Head 30 g 45 gor radius 2,5 g Width Range mm variable g mm variable Safety Soft Start Dimensions LxBxH 265 x 125 x 305mm Weight 4.7kg Optional 30g Machine LKF.450/2 Milling head 45 gincluding 2 cutting plates key SW 22 Plastic carrying case LKS.20 $17.90 Pg: 20 Quality Cutting Tools - March 2010

21 PB32 Electomagnetic Drilling Systems PB32 COMBI Height Width Depth Travel Weight 300mm 90mm 240mm 165mm 12.5kgs Total Power Motor Magnetic Adhesion Voltage Speed Cutter Capacity Drilling Capacity 770 watt 720 watt 1000kgs 220/240v or 110v (A.C. Supply) 550 rpm (no load) 12mm to 32mm 18mm The Powerbor PB32 has been ergonomically designed to provide an electromagnet drilling machine that is totally user friendly. The incredible power to weight ratio is such that the PB32 is considered by many to be the most versatile and durable machine of its type in the world today, and incorporates the following value-added features: Model No Price + GST PB32 - Without Coolant $ PB32-AK - With Coolant $ Fitted with reliable and well-proven Hitachi D watt power unit Free 13mm (1/2 ) drill chuck All Powerbor standard features and backed by a full range of replacement spares readily available from stock Available options include a complete coolant system (PB32-AK) Height Width Depth Travel Weight 300mm 90mm 240mm 165mm 12.5kgs Total Power Motor Magnetic Adhesion Voltage Speed Cutter Capacity Drilling Capacity Tapping Capacity 770 watt 720 watt 1000kgs 220/240v or 110v (A.C. Supply) rpm variable (no load) 12mm to 32mm 18mm 12mm The PB32 Combi has the same excellent power to weight ratio as the PB32. In addition it has forward, reverse and variable speed as standard, providing a choice of tapping, cutting and rilling capability. Model No PB32C - Without Coolant PB32C-AK - With Coolant Forward and reverse facility Fitted with reliable and well-proven Hitachi D watt power unit Free 13mm (1/2 ) drill chuck Price + GST P.O.A. P.O.A. All Powerbor standard features and backed by a full range of replacement spares readily available from stock Available options include a complete coolant system (PB32C-AK) Dual carrying handles for enhanced operating manoeuvrability Reversible handles for use in restrictive conditions Improved high density magnet for maximum adhesion Corrosive resistant, tangle-free cable from stand to drill unit The Powerbor Standard - Included will all machines Isolating power relay for improved handling safety Control panel situated conveniently on the same side as the traverse handles free protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set Quality Cutting Tools - March 2010 Pg: 21

22 Electomagnetic Drilling Systems PB45 PB70 Height Width Depth Travel Weight 370mm 115mm 280mm 200mm 20kgs Total Power Motor Magnetic Adhesion Voltage Speed Cutter Capacity Drilling Capacity 1200 watt 1150 watt 1500kgs Dual carrying handles for enhanced operating manoeuvrability Reversible handles for use in restrictive conditions Improved high density magnet for maximum adhesion Corrosive resistant, tangle-free cable from stand to drill unit Pg: 22 Quality Cutting Tools - March /240v or 110v (A.C. Supply) 250 rpm / 450 rpm (load speed) 12mm to 45mm 23mm Arbor MT 2 The cutting capacity to weight ratio of the POWERBOR PB45 complements the PB32 but adds more cutting power. The cutting and drilling power of the PB45 has the cutting and drilling power normally associated with much heavier machines. Its introduction was in response to demand from customers worldwide and confirms Powerbor s commitment to a continuous product development program. Model No Price + GST PB45 $ Fitted with a quality tried and tested Eibenstock 2 speed motor unit All Powerbor standard features are backed by a full range of replacement spares readily available from stock Comes with a complete external coolant system Model No Price + GST PB70 $ Height 445mm Width 110mm Depth 330mm Travel 200mm Weight 22kgs The POWERBOR PB70 has been carefully designed to guarantee enhanced power and versatility. In fact, the high performance capabilities of the PB70 when compared with similar size machines makes this drill one of the best investments available. A proven, powerful performer and still portable enough to be used on-site or in the workshop, the PB70 provides the perfect solution to even the most difficult of drilling applications. It incorporates a reversible variable speed motor as standard, allowing it to be readily used for tapping applications. Constant torque Thermal overload protection Electro-torque control Mechanical clutch Fitted with a quality tried and tested Eibenstock Soft start motor Infinitely variable speed Forward and reverse facility The Powerbor Standard - Included will all machines Total Power 1850 watt Motor 1800 watt Magnetic Adhesion 1500kgs Voltage 220/240v or 110v (A.C. Supply) Speed 60/140rpm 240/470 rpm (load speed) Cutter Capacity 12mm to 70mm Drilling Capacity 32mm Tapping Capacity 24mm Arbor MT watt motor unit All Powerbor standard features are backed by a full range of replacement spares readily available from stock Comes with a complete external coolant system Isolating power relay for improved handling safety Control panel situated conveniently on the same side as the traverse handles free protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set

23 Electomagnetic Drilling Systems PB70/2 PB100E Model No Price + GST PB70/2 $ Height Width Depth Travel Weight 445mm 110mm 330mm 200mm 22kgs Total Power 1750 watt Motor 1700 watt Magnetic Adhesion 1500kgs Voltage 220/240v or 110v (A.C. Supply) Speed 120/410 rpm (load speed) Cutter Capacity 12mm to 70mm Drilling Capacity 32mm Arbor MT 3 Back to basics at an exceptional price. The PB70/2 is a workhorse that brings all the drilling capacity of the PB70 to applications that do not require the full range of professional variations. Proven Eibenstock 1700 watt motor All Powerbor standard features are backed by a full range of replacement spares Dual carrying handles for enhanced operating manoeuvrability Reversible handles for use in restrictive conditions Improved high density magnet for maximum adhesion Corrosive resistant, tangle-free cable from stand to drill unit Model No Price + GST PB100E $ PB100ESB Swivel Base P.O.A. The Powerbor Standard - Included will all machines Truly putting the power into POWERBOR, the PB100E challenges all other machines in terms of power and reliability. Its base and body design achieves greatly enhanced rigidity and cutting capacity. The arbor design allows rapid cutter to twist drill change. The swivel base option is a customer-led development providing convenience and practicality and allowing precise positioning of the cutter. The weight is taken by the powerful magnet - a superb innovation especially for difficult working conditions. Height Width Depth Travel Weight 480mm 110mm 320mm 280mm 25kgs Total Power 1750 watt Motor 1700 watt Magnetic Adhesion 2000kgs Voltage 220/240v or 110v (A.C. Supply) Speed 110, 175, 245, 385 rpm (load speed) Cutter Capacity 12mm to 100mm Drilling Capacity 32mm Arbor MT 3 Swivel option allows for movement of the machine s body through 260 degrees and a lateral movement of 22mm Fitted with a quality tried and tested Eibenstock motor unit All Powerbor standard features are backed by a full range of replacement spares readily available from stock With a complete coolant system Isolating power relay for improved handling safety Control panel situated conveniently on the same side as the traverse handles free protective carrying case complete with safety strap, cutting fluid, safety guard and folding hex key set Quality Cutting Tools - March 2010 Pg: 23