Rigging Overview. Rigging Overview. Rigging. All rental equipment is available throughout North America.

Transcription

1 IGGING

2 igging Overview All rental equipment is throughout North America. igging Overview igging For specific product information, refer to the group of equipment within this section s overview on the following page for that product s corresponding page number. Lifting Gear Hire stocks a complete range of equipment for virtually any lifting or moving application. Some of the industries we serve: Energy Utilities Construction Maintenance Transportation Marine/Ship Building Petrochemical Pharmaceutical 188 (800) entals@entlgh.com

3 igging Index igging Equipment Manufacturer(s) Pages Digital Load Links Tractel, Dillon Chain Slings Pewag Chain Slings Hardware Pewag Master Link Crosby OV Shank Hook GN ope Fittings 205 Web Slings Lift-All, DD Sling < G-4163 Wire ope Slings Lift-All Length Polyester ound Slings Lift-All How To Measure Shackles Van Beest, Crosby Swivels & Hoist ings Crosby Clips & Turnbuckles Crosby igging igging Index Modular Spreader Beams Modulift Endcap Spreader Beams Maxibar Telescopic Spreader Beams Crosby, Tandemloc Lifting Beams Caldwell, AS Pallet Lifter Caldwell 269 Tri-Link GN ope Fittings Collector ing 272 (800)

4 Digital Load Links 2,200Lbs. 1,100,000 Lbs. LP Series LP25T C AVAILABLE FO G E D A B F Compact size emote on-off Lightweight aluminum 100 Hz Peak hold Advanced options Push button tare Design validated by F.E.A. Units are DNV GL approved Digital Load Links igging Proprietary 2.4 GHz wireless Industry leading wireless range of 700m/2300ft Error free data transmission Unrivalled resolution Environmentally sealed to IP67/NEMA6 90db Audible overload alarm Unmatched battery life of 1200hrs Internal antennae Dimensions A B C D ØE F G Crosby Shackle Loading Pin Ø LP1T G2130 3/4 LP2T G2130 3/4 LP6T G LP12T G /8 LP25T G LP35T G /4 LP55T G /4 LP75T G /4 Not relevant LP100T G in this capacity. /4 LP150T G /4 LP200T G /4 LP250T G LP300T G LP500T* G /4 * LP500T is not DNV certified. Specifications Capacity (Lbs.) esolution Units Safety Factor LP1T 2,200 1lb lb :1 LP2T5 5,500 2lb lb 3.1lb 5:1 LP6T5 13,000 2lb lb 4.4lb 5:1 LP12T 26,000 5lb lb 7.1lb 5:1 LP25T 55,000 10lb lb 11lb 5:1 LP35T 77,000 10lb lb 19lb 5:1 LP55T 110,000 20lb lb 25.3lb 5:1 LP75T 165,000 20lb lb 35.3lb 5:1 LP100T 220, lb lb 75lb 5:1 LP150T 330, lb lb 101.4lb 4:1 LP200T 440, lb lb 158.7lb 5:1 LP250T 550, lb lb 158.7lb 4:1 LP300T 660, lb lb 260lb 5:1 LP500T* 1,100, lb lb 546.7lb 5:1 * LP500T is not DNV certified. Battery Type Handheld 2 x AA/Load cell 4 x AA Battery Life Handheld 60 hours/ Load cell 1200 hours continuous Display Type 6 digit 25mm / 1" LCD Operating Temp -10 C to +50 C / 14 F to 122 F Accuracy Frequency System ange ± 0.3% of applied load 2.4 GHz 2,300 ft. Data ate 3 Hz up to 200 Hz can be ordered for dynamic load monitoring applications Protection IP67 / NEMA (800) entals@entlgh.com

5 AVAILABLE FO Digital Load Links 2, ,000 Lbs. EDXtreme EDx-100K Specifications Number Capacity x esolution Normal / Enhanced Body Construction and Overload Design EDx-2.5K 2,500 lbf x 2/0.5 10,000 N x 10/2 EDx-5K 5,000 lbf x 5/1 20,000 N x 20/5 Aircraft quality 2024 Aluminum 700% Ultimate overload protection EDx-10K 10,000 lbf x 10/2 50,000 N x 50/10 EDx-25K 25,000 lbf x 20/5 100,000 N x 100/20 Number Dimensions A in. B in. C in. D in. E in. F in. G in. H in. J in. EDx-55K 55,000 lbf x 50/10 250,000 N x 200/50 EDx-100K 100,000 lbf x 100/20 500,000 N x 500/100 EDx-160K 160,000 lbf x 200/ EDx-220K 220,000 lbf x 200/ EDx-330K 330,000 lbf x 500/ EDx-550K 550,000 lbf x 500/ Aircraft quality E4340 Alloy Steel 500% Ultimate overload protection Aircraft quality E4340 Alloy Steel 400% Ultimate overload protection igging Digital Load Links EDx-2.5K EDx-5K EDx-10K EDx-25K EDx-55K EDx-100K EDx-160K EDx-220K EDx-330K EDx-550K (800) entals@entlgh.com 191

6 Digital Load Links 2, ,000 Lbs. EDXtreme Unit (lbs.) with Shackles (lbs.) Approx. Shipping (lbs.) EDx-2.5K EDx-5K EDx-10K EDx-25K EDx-55K EDx-100K EDx-160K EDx-220K EDx-330K EDx-550K 250 1,490 1,600 Communicator 1 n/a 10 s AVAILABLE FO Digital Load Links igging Dynamometer Specifications Enclosure: Designed to NEMA4X/IP55. Suitable for continuous outdoor use. Accuracy: 0.1% of capacity up to EDx-100K.* 0.3% of capacity for EDx-160K and above.* epeatability: 0.1% of capacity up to EDx-100K.* 0.3% of capacity for EDx-160K and above.* * Normal resolution mode with Dillon provided shackles Safe overload: 200% of capacity Body protection: Aluminum and alloy steel capacities are powder painted. Bearings: Unmatched repeatability attained by needle bearings in shackle pin holes up to EDx-10K. Shackle pin acts as inner race. Shackles: Forged industry standard anchor shackles. s up to EDx-10K use precision machined shackle pin. Higher capacities use bar stock pin. Display: 128 x 64 dot-graphic LCD display shows up to 6 digits 1.0 (26 mm) high plus annunciators and softkeys. Digits are.11 inches (7mm) thick for unmatched readability. Display update rate: 2 times per second. Connector: ecessed sealed connector may be used for serial communications or connection to a Communicator remote. S-232: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character. Calibration: Traceable to the National Institute of Standards and Technology. Certificate included with curve of readings. Passes only with three consecutive confirming runs, with all points in specification. Battery Life: 400 hours continuous use with two C-cell alkaline batteries. 150 hours with adio Link system. Operating temperature: -4 F to 158 F (-20 to 70 C) Included with Instrument: All include certificate of calibration, manual and batteries. Plastic carry case included for EDx-2.5 to EDx-100K. Higher capacities include rugged plywood storage crate. Instruments with shackles include centering spacers (EDx-50K & up) and storage crate (EDx-50k to EDx-160K). Options: Shackles. 2.4 GHz radio board. Display backlight. Approval: CE, one all capacities excluding 550K. Communicator Specifications Enclosure: Designed to NEMA 3 / IP44 with optional sleeve. Suitable for protected outdoor use. Instrument size: 9.0 x 4.6 x 1.8 inch (228 x 117 x 45mm). Accuracy: Not applicable. Only sends and receives digital information. Display: 128 x 64 dot-graphic LCD display can show full readings up to 5 instruments. Battery life: 80 hours continuous radio using four AA alkaline batteries under typical use. Operating temperature: -4 F to 158 F (-20 to 70 C) Connectors: Sealed connectors may be used for serial communications and wired connection to an EDXtreme dynamometer. S-232 communication: Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character. Included with remote: Carry case and batteries. Accessories: ubberized case protector sleeve. emote wall mount bracket. Serial and remote cable assemblies. External power supply. Approval: CE adio Specifications FCC Certified: For unlicensed low power devices. No radio licensing or permits required for normal operation.* (In the US and Canada. Check local ordinances in other countries.) Frequency: 2.4 GHz spread-spectrum operates between GHz. Output level: 10 mw (20dBm) Display update rate: 1 times per second. Number of networks: 63 remotes can operate independently in the same airspace with unique channels. Number of links remote can control: Up to 15 addresses are per network channel. Configuration: Address and Network channels are front-panel configurable. Antenna: Integral antenna. ange: Open-air Up to 600 feet, line-of-sight. Indoors-dependent upon environment with 300 feet common. 192 (800) entals@entlgh.com

7 AVAILABLE FO Digital Load Links 110, ,000 Lbs. WN Series Wireless Compression Load Cell A D B G F E igging Digital Load Links H Dimensions A B D E F G H WNI50TCU M20 x WNI150TCU M20 x Note: equires the use of a wireless handheld display or wireless software package Straightpoint WNI50TCU Capacity esolution Units Safety Factor Battery Type Battery Life Operating Temp Accuary Frequency System ange Data ate Protection WNI50TCU 110, lb WNI150TCU 330, lb 34 3:1 Load cell 4 x AA Alkaline Load cell 1200 hrs continuous 14 F to 122 F ± 0.3% of applied load 2.4Ghz 2300 feet 3 Hz (Configurable to 200 Hz) IP67 / NEMA 6 (800) entals@entlgh.com 193

8 Digital Load Links Wireless Compression Load Cell Software & Accessories AVAILABLE FO Digital Load Links igging SW-MWLC100 For more complex applications our SW-MWLC100 software package can be configured to simultaneously display up to 100 load cell channels of live data. Graphical pages can be built showing the data in a variety of formats including digital display or bars. Up to eight pages can be defined and the pages easily navigated between. A variety of image formats can be imported, including JPG, GIF, PDF and DXF. Custom applications including branding and color scheme are. Please contact our sales department for pricing. Both SW-MWLC software packages are supplied with a SW-USBBSE extended range USB dongle. Features and benefits: Displays and logs data from up to 24 or 100 Straightpoint wireless load cells Mapping / graphical capabilities Webserver offers remote viewing on ipads / tablets / smart phones and aslo supplies JSON data on demand Logging at timed intervals, manual or on overload / underload Visual and audible alarms indicates overload, low battery & comms error Zoom in to channel to see data trends and history Export and log data in CSV format Straightpoint WNI50TCU IP ating (SW-USBBSE) Operating Temperature License Frequency ange Loadcell Inputs PC equirements Operating System SW-MWLC100 IP65 or NEMA 4X -10C to +50C or 14F to 122F License Free 2.4GHz 250 meters or 800 feet Up to 100 Intel i3 processor with 2GB AM Windows XP, Vista, Windows 7 or Windows (800) entals@entlgh.com

9 This page contains SALE ITEMS ONLY Chain Slings Dimensions & Load atings Grade 120 Alloy Nominal Thickness d Pitch t Dimensions inside b1 min. Width Outside b2 max. WLL lb Safety Factor 4:1 Breaking load lb. lb./ft. NI 720 (9/32).276 (7 mm) ,200 20, NI 1020 (3/8).394 (10 mm) ,600 42, NI 1320 (1/2).512 (13mm) ,900 71, s Number Diameter Grade 100 Alloy Grade 80 Alloy Grade 50 Stainless Steel Nominal Diameter D Pitch P inside W1 min. Width Outside W2 max. lb./ft. Pew 197 3/16 Nik Pew 217 7/32 Ni 5.50 Ni Pew 276 9/32 Ni 70 Ni 7 Nik Pew 315 5/16 Ni 80 Ni Pew 394 3/8 Ni 100 Ni 10 Nik Pew 512 1/2 Ni 130 Ni 13 Nik Pew 63 5/8 Ni 160 Ni 16 Nik Pew 787 3/4 Ni 200 Ni Pew 866 7/8 Ni 220 Ni Pew Ni 260 Ni Pew /4 Ni igging Chain Slings Diameter Grade 120 Alloy Grade 100 Alloy Grade 80 Alloy Grade 50 Stainless Steel Working load lbs. Safety factor 4:1 Manufac. test load lbs. Breaking load lbs Diameter Working load lbs. Safety factor 4:1 Load ating Manufac. test load lbs Breaking load lbs. Diameter Working load lbs. Safety factor 4:1 Manufac. test load lbs. Breaking load lbs. Diameter Working load lbs. Safety factor 4:1 Manufac. test load lbs. Pew 0 3/16 1,100 2,200 4,400 Pew 7/32 9/32 5,200 10,400 20,800 7/32 2,700 5,400 10,800 7/32 2,100 4,200 8,400 Pew 9/32 9/32 4,300 8,600 17,200 9/32 3,500 7,000 14,000 9/32 2,200 4,400 8,800 Pew 5/16 3/8 10,600 21,200 42,400 5/16 5,700 11,400 22,800 5/16 4,500 9,000 18,000 Pew 3/8 1/2 17,900 35,800 71,600 3/8 8,800 17,600 35,200 3/8 7,100 14,200 28,400 3/8 4,400 8,800 17,600 Pew 1/2 1/2 15,000 30,000 6,000 1/2 12,000 24,000 48,000 1/2 7,100 14,200 28,200 Pew 5/8 5/8 22,600 45,200 90,400 5/8 18,100 36,200 72,400 5/8 11, ,00 44,000 Pew 3/4 3/4 35,300 70, ,200 3/4 28,300 56, ,200 Pew 7/8 7/8 42,700 85, ,800 7/8 34,200 68, ,800 Pew , , , ,700 95, ,800 Pew 1 1 /4 1 1/4 90, , , /4 72, , ,200 Breaking load lbs. (800) entals@entlgh.com 195

10 Chain Slings ID & eduction Factors Grade 120 Grade 100 Grade 80 Grade 50 This page contains SALE ITEMS ONLY Pewag lifting chain and fittings are marked with a batch identification number and the manufacturer s identification marking: the number, 120 or 12 to indicate Grade 120 Alloy, 100, 10 or V to indicate Grade 100 Alloy, 8 to indicate Grade 80 Alloy and 50 to indicate Grade 50 Stainless. All Alloy chains are 100% tested to 2 times the working load values and are furnished with a test certification to this effect. Every chain sling manufactured by Pewag is supplied with a steel tag and test certificate as shown. Chain Slings igging Single-leg chain Multi-leg chain To be used for various slinging methods and conditions without shock loads. Grade point I.D. tag 196 (800) entals@entlgh.com

11 This page contains SALE ITEMS ONLY Chain Slings Maximum Capacity atings Specifications Safety Factor 1-leg slings 2-leg-slings 3-leg slings and 4-leg slings 4:1 Angle 90 degrees 60 degrees 45 degrees 30 degrees 60 degrees 45 degrees 30 degrees Load Factor Grade 120 Alloy Temperature esistance Ni 720 9/32 5,200 9,000 7,400 5,200 13,500 11,000 7,800 Ni /8 10,600 18,400 15,000 10,600 27,500 22,500 15,900 Ni /2 17,900 31,000 25,300 17,900 46,500 38,000 26,900 Grade 100 Alloy Ni /32 2,700 4,700 3,800 2,700 7,000 5,700 4,000 Ni 70 9/32 4,300 7,400 6,100 4,300 11,200 9,100 6,400 Ni 80 5/16 5,700 9,900 8,100 5,700 14,800 12,100 8,500 Ni 100 3/8 8,800 15,200 12,400 8,800 22,900 18,700 13,200 Ni 130 1/2 15,000 26,000 21,200 15,000 39,000 31,800 22,500 Ni 160 5/8 22,600 39,100 32,000 22,600 58,700 47,900 33,900 Ni 200 3/4 35,300 61,100 49,900 35,300 91,700 74,900 53,000 Ni 220 7/8 42,700 74,000 60,400 42, ,900 90,600 64,000 Ni , ,400 84,400 59, , ,600 89,550 Grade 80 Alloy etains 100% of work load limit at minus degrees F. Not for temperatures over 400 degrees F. etains 100% of work load limit at minus degrees F. Not for temperatures over 400 degrees F. Special G F chain for elevated temperature. igging Chain Slings Ni 5.5 7/32 2,100 3,600 3,000 2,100 5,500 4,400 3,200 Ni 7 9/32 3,500 6,100 4,900 3,500 9,100 7,400 5,200 Ni 8 5/16 4,500 7,800 6,400 4,500 11,700 9,500 6,800 Ni 10 3/8 7,100 12,300 10,000 7,100 18,400 15,100 10,600 Ni 13 1/2 12,000 20,800 17,000 12,000 31,200 25,500 18,000 Ni 16 5/8 18,100 31,300 25,600 18,100 47,000 38,400 27,100 Ni 20 3/4 28,300 49,000 40,000 28,300 73,500 60,000 42,400 Ni 22 7/8 34,200 59,200 48,400 34,200 88,900 72,500 51,300 Ni ,700 82,600 67,400 47, , ,200 71,500 Ni /4 72, , ,200 72, , , ,400 Grade 50 Stainless Steel Nik 5 3/16 1,100 1,900 1,600 1,100 2,900 2,300 1,700 Nik 7 9/32 2,200 3,800 3,100 2,200 5,700 4,600 3,300 Nik 10 3/8 4,400 7,500 6,200 4,400 11,500 9,300 6,600 Nik 13 1/2 7,100 12,100 10,000 7,100 18,500 14,900 10,700 *Nik 16 5/8 11,000 18,700 15,600 11,000 23,100 23,100 16,500 *Sling work load limits are reduced 10% when the HSK16 eye sling hook is used. etains 100% of work load limit at minus degrees F, 90% at degrees F, and 75% at degrees F. Not for temperatures over 750 degrees F. etains 100% of work load limit at minus degrees F, 75% at 750-1,100 degrees F, and 50% at 1,100-1,290 degrees F. Not for temperatures over 1,290 degrees F. (800) entals@entlgh.com 197

12 Chain Slings Standard Chain Sling Assemblies Standard Assemblies of Pewag Chain Chain slings can be delivered with Connex connecting links and accessories ready fitted, with clevis fittings, or in welded construction. Should you require any chain sling assemblies other than those in this brochure, please send us a sketch of the desired model. The standard tolerance for the length L is pitch. This page contains SALE ITEMS ONLY Chain Slings igging Ordering Data Example of how to order: 1. Determine the maximum load to be lifted. 2. Determine the type of slings needed (single, double, etc.) 3. Estimate the proper angle between the leg of the sling and the load during operation 4. Select the proper fittings (hooks, master links, etc.) 5. Determine the overall reach (measured from bearing point on master link to bearing point of fitting). 6. Choose chain size which meets your required work load, angle and reduction factor 7. Choose grade, type and finish of steel which meets your requirements. 198 (800) entals@entlgh.com

13 AVAILABLE Master Link A Master link for single leg slings and 2-leg slings. Proof tested 2x wll (working load limit) of master link only. Enlarged Master Link M The same as master link A above; however because of their larger inner dimensions, suitable for larger crane hooks or special hooks. Proof tested 2x wll (working load limit) of master link. Master Link Assemblies V For assembling 3- and 4-leg chains with connex links, and for rope slings. Proof tested. VXK 1 FO Chain Sling Hardware Grade 100 Alloy Components Master Link A Specifications WLL* Stock Lbs. 4:1 Dia. d t w Master Link for Chain 0 Lb./Pc. 1-leg 2-leg A 100 3,800 3/ /32 A 130 5,800 1/ /32 7/32 A 160 7,500 5/ /16 9/32 A ,000 3/ /8 5/16 A ,700 7/ /2 3/8 A , /8 1/2 A , / /4 5/8 A , / /8 3/4 A , / /8 A , /4 1 A , / /4 Enlarged Master Link M Specifications WLL* Stock Lbs. 4:1 Dia. d t w Master Link for Chain 0 Lb./Pc. 1-leg 2-leg M 100 3,800 3/ /32 M 130 6,100 1/ /32 7/32 M 160 8,400 5/ /16 9/32 M ,800 3/ /8 5/16 M ,500 7/ /2 3/8 M , /8 1/2 M , / /4 5/8 M , / /8 3/4 Master Link Assemblies V Specifications Stock Dia. (in) e t w Lb./Pc. Assembly for Chain 0 3-and 4-leg V / /32 V / /32 + 5/16 V /8 V / /2 V / /8 V /4 V /8 V / V / /4 Chain Sling Hardware igging Clevis Master Sets VXK 1 Specifications For 1-leg chains with shortening hook. VXK 4 For 3- and 4-leg slings with shortening hooks. VXK 2 For 2-leg slings with shortening hooks. For Chain 0 d t w e Lb./Pc. VXK / VXK / VXK / VXK / VXK / VXK / VXK / VXK / VXK / VXK / VXK / VXK / (800) entals@entlgh.com 199

14 Chain Sling Hardware Grade 100 Alloy Components Enlarged Master Link Assemblies VM For 3- and 4-leg chain slings. Large inner width. Proof tested. Connex Connecting Link C Enlarged Master Link Assemblies VM Specifications Stock Dia. e t w Lb./Pc. Assembly for chain 0 3- and 4-leg VM5.50 3/ /32 VM / /32 + 5/16 VM /8 VM / /2 VM / /8 VM /4 Connex Connecting Link C Specifications This page contains SALE ITEMS ONLY Chain Sling Hardware igging General connecting link for connection of: Master links to chain, chain to chain, hooks to chain. Connex Connecting Link CL Non-removable. Clevis Shortening Hook XK In line shortening hook not for basket configurations. Clevis Sling Hook KHS General purpose hook with forged safety catch. Clevis Grab Hook KP WLL Lbs. 4:1 For Chain e c s d b g Lb./Pc. C5.50 2,700 7/ C70 4,300 9/ C80 5,700 5/ C100 8,800 3/ C130 15,000 1/ C160 22,600 5/ C200 35,300 3/ C220 42,700 7/ C260 59, Connex Connecting Link CL Specifications WLL Lbs. 4:1 For Chain e c s d b g Lb./Pc. CL 70 4,300 9/ CL 100 8,800 3/ CL ,000 1/ CL ,600 5/ Clevis Shortening Hook XK Specifications WLL Lbs. 4:1 For Chain e h a d g1 b Lb./Pc. KHS ,700 7/ KHS 70 4,300 9/ KHS 80 5,700 5/ KHS 100 8,800 3/ KHS ,000 1/ KHS ,600 5/ KHS ,300 3/ KHS ,700 7/ Clevis Sling Hook KHS Specifications WLL Lbs. 4:1 For Chain e h a d g1 b Lb./Pc. KHS ,700 7/ KHS 70 4,300 9/ KHS 80 5,700 5/ KHS 100 8,800 3/ KHS ,000 1/ KHS ,600 5/ KHS ,300 3/ KHS ,700 7/ Clevis Grab Hook KP Specifications First G100 grab hook that does not require WLL reduction when used for shortening WLL Lbs. 4:1 For Chain e b d g Lb./Pc. KP ,700 7/ KP 70 4,300 9/ KP 80 5,700 5/ KP 100 8,800 3/ KP ,000 1/ KP ,600 5/ KP ,300 3/ KP ,700 7/ (800) entals@entlgh.com

15 This page contains SALE ITEMS ONLY Chain Sling Hardware Grade 100 Alloy Components Clevis Safety Hook KLH Clevis Safety Hook KLH Specifications WLL lbs. 4:1 for chain e h a b d g weight lb./pc. KLH 70 4,300 9/ KLH 80 5,700 5/ KLH 100 8,800 3/ KLH ,000 1/ KLH ,600 5/ Clevis Foundry Hook KF Specifications WLL lbs. 4:1 for chain e h a g d b weight lb./pc. KF 70 4,300 9/ KF 80 5,700 5/ KF 100 8,800 3/ KF ,000 1/ Eye Sling Hook HS Specifications WLL lbs. 4:1 for chain e h a d1 d2 g1 b weight lb./pc. HS ,700 7/ HS ,700 9/32 + 5/ HS 100 8,800 3/ HS ,000 1/ HS ,600 5/ HS ,300 3/ HS ,700 7/ HS , HS 32 72, / Eye Grab Hook P Specifications WLL lbs. 4:1 for chain e b d1 d2 g weight lb./pc. P ,700 7/ P ,700 9/32 + 5/ P 100 8,800 3/ P ,000 1/ P ,600 5/ P ,300 3/ P ,700 7/ P , P 32 72, / Eye Grab Hook with Safety Catch PS Specifications WLL lbs. 4:1 for chain e b d1 d2 g weight lb./pc. PS ,700 9/32 + 5/ PS 100 8,800 3/ PS ,000 1/ PS ,600 5/ Automatically closes and locks under load. Clevis Foundry Hook KF Used when throat opening of sling hook is too small. Eye Sling Hook HS For general lifting applications. All hooks with forged safety catch. Eye Grab Hook P First G100 grab hook that does not require WLL reduction when used for shortening. Eye Grab Hook P Same as above hook with added safety catch feature. Chain Sling Hardware igging (800) entals@entlgh.com 201

16 Chain Sling Hardware igging Chain Sling Hardware Grade 100 Alloy Components Safety Hook LH Specifications WLL lbs. 4:1 For chain e h a b d1 d2 g weight lb./pc. LH ,700 9/32 + 5/ LH 100 8,800 3/ LH ,000 1/ LH ,600 5/ LH ,300 3/ LH ,700 7/ Foundry Hook F Specifications WLL lbs. 4:1 for chain e h a d1 d2 b g weight lb./pc. F ,700 9/32 + 5/ F 100 8,800 3/ F ,000 1/ F ,600 5/ F ,300 3/ Clevis eevable Master Link KO Specifications WLL lbs. 4:1 for chain e t w d s weight lb./pc. KO 70 4,300 9/ KO 80 5,700 5/ KO 100 8,800 3/ KO ,000 1/ KO ,600 5/ Webbing Sling Connecting Link CA Specifications WLL lbs. 4:1 for chain a e c d b g weight lb./pc. CA 80 5,700 5/ CA 100 8,800 3/ CA ,000 1/ CA ,600 5/ CA ,700 7/ Plate Hook BW Specifications WLL lbs. 4:1 for chain e s b h d1 g weight lb./pc. BW ,700 9/32 + 5/ BW 100 8,800 3/ BW ,000 1/ BW ,600 5/ BW ,300 3/ BW ,700 7/ This page contains SALE ITEMS ONLY Safety Hook LH Automatically closes and locks under load. Foundry Hook F Used when throat opening of sling hook is too small. Clevis eevable Master Link KO Master link used for choker / reeving slings. Webbing Sling Connecting Link Car Connecting link for round web slings. Plate Hook BW For lifting sheet metal stacks and boards. 202 (800) entals@entlgh.com

17 AVAILABLE FO Alloy Steel Quenched and Tempered. Individually proof tested to 2 times the Working Load Limit, unless otherwise noted, with certification. Proof tested with fixture sized to prevent localized point loading per ASTM A952. Proof test certification shipped with each link. Master Link 7, ,000 Lbs. Alloy Type Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B Sizes from 1/2 to 4 are drop forged. Specifications Size A A-342 Working Load Limit (lbs.)* Proof Load (lbs.)** Each (lbs.) Dimensions (in) A B C Deformation Indicator 1/2W ,400 17, / ,000 18, /4W ,300 28, /8W ,200 35, W ,000 60, /4W ,100 90, /2W , , / , , , , / , , / , , / , , , , / , , / , , / , , , , / , , / , , / , , , , A 342 A 345 igging Master Link * Minimum ultimate load is times the working load limit. Based on single leg sling (in-line-load), or resultant load on multiple legs with an included angle less than or equal to 120 degrees. ** Proof test load equals or exceeds the requirement of ASTM A952(8.1) and ASME B for the chain size and number of legs. ++ Welded Master Link Specifications A Size A-345 Working Load Limit (lbs.)* Each (lbs.) Proof Load (lbs.)** Dimensions A B C D E F G Deformations Indicator 3/4W , , /8W , , , , / , , / , , / , , , , / , , / , , , , *** * Minimum ultimate load is 5 times the working load limit. Based on single leg sling (in-line load), or resultant load on multiple legs with an included angle less than or equal to 120 degrees. **Proof test load equals or exceeds the requirement of ASTM A952(8.1) and ASME B for the chain size and number of legs. ++ Welded Master Link. *** Sublink only. (800) entals@entlgh.com 203

18 Master Link 400T Master Link AVAILABLE FO Temperatures If extreme temperature situations are applicable, the following load reduction must be taken in to account: Temperatures Temperature eduction for elevated temperatures New Working Load Limit Master Link Material: Grade 80 Safety factor: ton, 5 times > ton, 4 times Standards: Generally according to EN Finish: Painted Temperature range: ton, -4 F up to +392 F > ton, -40 F up to +392 F; Polar ated Standard certification: Certificate of Conformity 3.1 material certificate EN up to 392 F 100% of ated Working Load Limit 392 F F 90% of ated Working Load Limit 572 F F 75% of ated Working Load Limit >752 F not allowed igging WLL (ton) MBL (ton) Specifications A B C (lbs.) / / / (800) entals@entlgh.com

19 AVAILABLE FO OV Shank Hook OV Shank Hook igging OV Shank Hook Capacity (Tons) Dimensions A B C D E F G H I J K L / / / / / / /8 8 1 /4 4 3 / / / / (lbs.) (800) entals@entlgh.com 205

20 Slings Effect of Angle of Lift on a Sling ated Capacity Using slings at an angle can become deadly if that angle is not taken into consideration when selecting the sling to be used. The tension on each leg of the sling is increased as the angle of lift, from horizontal, decreases. It is most desirable for a sling to have a larger angle of lift, approaching 90. Lifts with angles of less than 30 from horizontal are not recommended. If you can measure the angle of lift or the length and height of the sling as rigged, you can determine the properly rated sling for your lift. What would be the rating of each sling rigged at this angle? 1. Calculate the eduction Factor [F]. using the angle from horizontal, read across the Angle Chart to the corresponding number of the eduction Factor column. O Divide sling height* [H] by sling length* [L] 2. eduction Factor [F] x the sling s rated capacity for the type hitch that will be used = Sling s eduction ating. *Measured from a common horizontal plane to the hoisting hook What capacity sling do I need? 1. Determine the weight that the sling will be lifting [LW]. 2. Calculate the Tension Factor [TF]. using the angle from horizontal, read across the Angle Chart to the corresponding number of Tension Factor column. O Divide sling length* [L] by sling height* [H] 3. Lifting [LW] x the Tension Factor [TF] = Minimum Sling ating for the type of hitch that will be used. *Measured from a common horizontal plane to the hoisting hook Slings igging educed Capacity Effect of Angle Chart eduction Factor (F) Angle From Horizontal Tension Factor (TF) Increasing Tension Sling capacity decreases as the angle from horizontal decreases. Sling angles of less than 30 are not recommended. 206 (800) entals@entlgh.com

21 Type U Type 1 Type 2 This page contains SALE ITEMS ONLY Web Slings Standard Web Sling Types Hardware Slings Unilink and Web Trap Hardware can help to extend sling life by protecting the webbing from abrasion on rough crane hooks. Hardware can often be reused, lowering sling replacement costs. Type U (UU) Has the preferred and economical Unilink fitting on each end for use in a vertical, choker or basket hitch. Unilinks allow choking from either end to save time and vary wear points. Type 1 (TC) Has a Web-Trap triangle and choker fitting on either end. Typical use is in a choker hitch. Can also be used in vertical and basket hitches. Type 2 (TT) Has a Web-Trap triangle on each end. Normally used in a basket hitch, but can also be used in a vertical hitch. They cannot be used as a choker. Eye Type Type 3 (EE) Flat Eye slings are very popular and can be used in all three types of hitches. They are easier to remove from beneath the load than sling types 1,2 and 4. Unless type 4 is requested, type 3 will be supplied as the standard EE sling. Type 4 (EE) Twisted Eye slings are similar to Type 3 except the eyes are turned 90 to form a better choker hitch. The eyes of a Type 4 nest better on the crane hook. Type 3 Type 4 Type 5 Endless Type Type 5 (EN) Endless slings are versatile and the most economically priced. They can be used in all three types of hitches. The sling can be rotated to minimize wear. The sling legs can be spread for improved load balance. everse Eye Type Type 6 () An endless sling with butted edges sewn together to double the sling width. They have reinforced eyes and wear pads on both sides of body and eyes. The result is an extremely strong and durable sling. Type of Webbing Lift-All Web Selector Quick Comparisons Approximate Thickness (in) elative Strength/Width Factor A Price/Strength Factor B Advantages Webmaster /16 100% 100% Webmaster webs are the industry standard. igging Web Slings Type 6 Webmaster /8 75% 105% Wider bearing surface per capacity. Tuff-Edge 3/16 100% 105% Tuff-Edge fights edge abrasion and cutting the #1 cause of web sling damage. Dura-Web /16 125% 114% Up to 30% better against cuts. Dura-Web / % 137% Dura-Web lasts 25% longer against surface abrasion Factor A elative strength factor. This column compares the strength of the various webs to Webmaster 1600 in the same widths. Factor B Price to strength comparison. This column compares the relative cost per capacity of the various webs to Webmaster 1600 using a 2 x 10 Type 3 sling. (800) entals@entlgh.com 207

22 Web Slings 1,600 59,500 Lbs. (Vertical) Tuff Edge & Webmaster 1600 Eye-to-Eye Type 3 (Flat Eye) Type 3 (Flat Eye) This page contains SALE ITEMS ONLY Type 4 (Twisted Eye) Type 4 (Twisted Eye) Specifications Web Slings Eye-to-Eye igging Ply Qty. Web Width ated Capacity* (lbs.) Vertical Choker V. Basket Webmaster Part No. *** EE1-801T 1 1,600 1,280 3,200 EE1-801 EE1-802T 2 3,200 2,500 6,400 EE1-802 EE1-803T 3 4,800 3,800 9,600 EE1-803 EE1-804T 4 6,400 5,000 12,800 EE1-804 One Ply EE1-806T 6 9,600 7,700 19,200 EE1-806 EE1-808T 8 12,800 10,200 25,600 EE1-808 EE1-810T 10 16,000 12,800 32,000 EE1-810 EE1-812T 12 19,200 15,400 38,400 EE1-812 EE2-801T 1 3,200 2,500 6,400 EE2-801 EE2-802T 2 6,400 5,000 12,800 EE2-802 EE2-803T 3 8,800 7,040 17,600 EE2-803 EE2-804T 4 11,500 9,200 23,000 EE2-804 Two Ply EE2-806T 6 16,500 13,200 33,000 EE2-806 EE2-808T 8 19,200 15,400 38,400 EE2-808 EE2-810T 10 22,400 17,900 44,800 EE2-810 EE2-812T 12 26,900 21,500 53,800 EE2-812 EE3-801T 1 4,100 3,300 8,200 EE3-801 EE3-802T 2 8,300 6,600 16,600 EE3-802 EE3-803T 3 12,500 10,000 25,000 EE3-803 EE3-804T 4 16,000 12,800 32,000 EE3-804 Three Ply EE3-806T 6 23,000 18,400 46,000 EE3-806 EE3-808T 8 30,700 24,500 61,400 EE3-808 EE3-810T 10 36,800 29,400 73,600 EE3-810 EE3-812T 12 44,000 35,200 88,000 EE3-812 EE4-801T 1 5,000 4,000 10,000 EE4-801 EE4-802T 2 10,000 8,000 20,000 EE4-802 EE4-803T 3 14,900 11,900 29,800 EE4-803 EE4-804T 4 19,800 15,800 39,600 EE4-804 Four Ply EE4-806T 6 29,800 23,800 59,600 EE4-806 EE4-808T 8 39,700 31,700 79,400 EE4-808 EE4-810T 10 49,600 39,600 99,200 EE4-810 EE4-812T 12 59,500 47, ,000 EE4-812 Note: Tapering-Types 3 and 4 slings are tapered at 3 and wider unless otherwise specified. *** Add a D to sling code for polyester. *** Add a D to sling code for polyester. Always use Wear Pads to protect synthetic slings from being cut by load edges. Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30. Eye Length (Applies to all Web Slings) Sling Width (In.) Ply Qty / / (800) entals@entlgh.com

23 This page contains SALE ITEMS ONLY Web Slings 3,200 80,700 Lbs. (Vertical) Tuff Edge & Webmaster 1600 Endless Type 5 Type 5 Specifications Always use Wear Pads to protect synthetic slings from being cut by load edges. Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30. EN1-801T Ply Qty. Web Width ated Capacity* (lbs.) Vertical Choker V. Basket Webmaster Part No. *** 1 3,200 2,500 6,400 EN1-801 EN1-802T 2 6,400 5,000 12,800 EN1-802 EN1-803T 3 8,800 7,040 17,600 EN1-803 EN1-804T 4 11,500 9,200 23,000 EN1-804 One Ply EN1-806T 6 16,500 13,200 33,000 EN1-806 EN1-808T 8 19,200 15,400 38,400 EN1-808 EN1-810T 10 22,400 17,900 44,800 EN1-810 EN1-812T 12 26,900 21,500 53,800 EN1-812 EN2-801T 1 6,200 4,900 12,400 EN2-801 EN2-802T 2 12,400 9,900 24,800 EN2-802 EN2-803T 3 16,300 13,000 32,600 EN2-803 EN2-804T 4 20,700 16,500 41,400 EN2-804 Two Ply EN2-806T 6 28,600 23,000 57,200 EN2-806 EN2-808T 8 30,700 24,500 61,400 EN2-808 EN2-810T 10 33,600 26,800 67,200 EN2-810 EN2-812T 12 37,600 30,000 75,200 EN2-812 EN3-801T 1 8,000 6,400 16,000 EN3-801 EN3-802T 2 16,000 12,800 32,000 EN3-802 EN3-803T 3 21,500 17,200 43,000 EN3-803 EN3-804T 4 28,700 23,000 57,400 EN3-804 Three Ply EN3-806T 6 40,700 32,500 81,400 EN3-806 EN3-808T 8 46,000 36,800 92,000 EN3-808 EN3-810T 10 51,500 41, ,000 EN3-810 EN3-812T 12 59,200 47, ,400 EN3-812 EN4-801T 1 10,000 8,000 20,000 EN4-801 EN4-802T 2 19,800 15,800 39,600 EN4-802 EN4-803T 3 26,700 21,300 53,400 EN4-803 EN4-804T 4 35,600 28,400 71,200 EN4-804 Four Ply EN4-806T 6 50,500 40, ,000 EN4-806 EN4-808T 8 57,600 46, ,200 EN4-808 EN4-810T 10 67,200 53, ,400 EN4-810 EN4-812T 12 80,700 64, ,400 EN4-812 Note: Type 5 (Endless) slings are Not tapered unless specified. *** Add a D to sling code for polyester. ***Add a D to sling code for polyester. igging Web Slings Endless (800) entals@entlgh.com 209

24 Web Slings 1,600 53,700 Lbs. (Vertical) Type 3 Flat Eye & Type 4 Twisted Eye Eye-to-Eye This page contains SALE ITEMS ONLY Heavy Duty (900 Webbing) 1-5 Heavy Duty (900 Webbing) 6-12 Width Ply Qty. ated Capacity In Pounds Vertical Choker Basket Inside Eye Size Laying Flat In LBS 5 Base add/ft Width Ply Qty. ated Capacity In Pounds Vertical Choker Basket Inside Eye Size Laying Flat In LBS 5 Base add/ft Nylon Web Slings igging 1 91EE1 1 1, , EE2 2 3,200 2,600 6, EE3 3 4,100 3,300 8, EE4 4 5,500 4,400 11, EE1 1 3,200 2,500 6, EE2 2 6,400 5,100 12, EE3 3 8,200 6,600 16, EE4 4 11,000 8,800 22, EE1 1 4,800 3,800 9, EE2 2 8,900 7,200 17, EE3 3 12,300 9,900 24, EE4 4 17,800 14,400 35, EE1 1 6,400 5,100 12, EE2 2 11,500 9,200 23, EE3 3 15,300 12,200 30, EE4 4 23,000 18,000 46, EE1 1 8,000 6,400 16, EE2 2 13,600 10,900 27, EE3 3 19,000 15,000 38, EE4 4 27,200 20,400 54, NOTE: Standard eye construction is Type 3 flat eyes When requiring twisted eyes, must specify Type 4 Tapered eyes on all sling widths 3 and larger NOTE: Angles of less than 30 will not be used. FE TO ANGLE EFFICIENCY CHAT 6 96EE1 1 9,600 7,700 19, EE2 2 16,300 13,000 32, EE3 3 23,000 18,400 46, EE4 4 32,600 24,500 65, EE1 1 12,800 10,200 25, EE2 2 22,000 17,600 44, EE3 3 33,000 24,750 66, EE4 4 44,000 33,000 88, EE1 1 16,000 12,800 32, EE2 2 24,000 19,200 48, EE3 3 36,000 28,800 72, EE4 4 48,000 38,400 96, EE1 1 19,200 15,360 38, EE2 2 26,900 21,500 53, EE3 3 40,320 32,250 90, EE4 4 53,700 43, , NOTE: Standard eye construction is Type 3 flat eyes When requiring twisted eyes, must specify Type 4 Tapered eyes on all sling widths 3 and larger NOTE: Angles of less than 30 will not be used. FE TO ANGLE EFFICIENCY CHAT 210 (800) entals@entlgh.com

25 This page contains SALE ITEMS ONLY 6 x 19 and 6 x 37 Class Wire ope Wire ope General Information Wire ope These high quality wire ropes are in cut lengths or by the reel. Wire Core 6 x 19 Class 6 x 19 Extra Improved Plow Steel (EIP) Higher Capacities Wire Core Six Strand opes Having 9 to 26 Wires Per Strand Better Abrasion esistance 6 x 37 Class 6 x 36 Extra Improved Plow Steel (EIP) Higher Capacities Six Strand opes Having 27 to 49 Wires Per Strand More Flexible 19 x 7 Note: Specialty ropes are upon request. otation esistant Wire ope ope Dia. (in) Approx. per Foot (lbs.) Nominal Breaking Strength (tons) 3/ / / / / / / / ope Diameter (in) Specifications Approx. per Foot (lbs.) Nominal Breaking Strength (tons) 1/ / / / / / / / / / / / / / / / Note: Specialty ropes are upon request. igging Wire ope (800) entals@entlgh.com 211

26 Wire ope Slings General Information How to order wire rope slings Specify: 1. ope Diameter inches 2. Sling Length Feet (Bearing point to bearing point 3. Description of rope construction class 6 x 19 etc. 4. Attachments Master link, Hook, etc. Tolerances and Minimum Lengths efer to tables for tolerances and minimum lengths. Wire ope Class Standard rope classes are shown for each type and size of sling in the charts. Specific rope constructions are upon request. This page contains SALE ITEMS ONLY Standard Combinations Wire ope Slings igging Eye & Eye Eye & Thimble Eye & Hook Eye & Crescent Thimble Eye & Slip-Thru Thimble Thimble & Crescent Thimble Thimble & Slip-Thru Thimble Crescent Thimble & Hook Crescent Thimble & Crescent Thimble Sliding Choker Eye & Thimble Slip-Thru Thimble & Hook Eye & Eye Thimble & Thimble Thimble & Hook Slip-Thru Thimble & Slip-Thru Thimble Acknowledgement Lift-All wire rope slings and rated capacities comply with all OSHA, ASME B30.9, and Wire ope Technical Board publications. Portions of this section of the catalog were taken from the Wire ope Sling User s Manual with the permission of the Wire ope Technical Board and the American Iron and Steel Institute. Note: Proof testing with certification for all slings at an additional charge. 212 (800) entals@entlgh.com

27 AVAILABLE FO Wire ope Slings Ton (Vertical) IWC 6x19 & 6x36 EIPS Mechanical Splice With Single Part Body Permaloc Mechanically swaged, flemish eye splice wire rope slings. Wire ope Class 6 x 19 EIP, IWC EIP, IWC *ated Capacity (tons) Specifications **Min. Sling Length Crescent Thimble Eye Size Slip Thru Thimble Eye Size Standard Thimbled Sliding ope Dia. (in) Vertical Choker Vertical Basket Eye Size (in) W x L Eye Size (in) W x L Eye Hook Cap. (tons) (in) W x L (in) W x L Choker Hook (in) 1/ x 4 7/8 x 1 5 /8 1 2 x /8 x 4 1 /8 3/8 5/ /2 x /16 x 1 7 /8 1 2 x /8 x 4 1 /8 3/8 3/ x /8 x 2 1 /8 1 1 /2 2 x /8 x 4 1 /8 3/8 7/ /2 x /4 x 2 1 /4 2 2 x /8 x 4 3 /8 1/2 1/ x /2 x 2 3 / /4 x /8 x 4 3 /8 1/2 9/ /2 x /2 x 2 3 /4 4 1 /2 2 1 /4 x /8 x 4 3 /8 5/8 5/ x /4 x 3 1 /4 4 1 /2 2 3 /4 x /8 x 6 5 /8 5/8 3/ x 12 2 x 3 3 / /4 x 8 1/2 3 3 /8 x 6 5 /8 3/4 7/ x /4 x 4 1 / /2 x /4 x 7 1 /8 7/ x /2 x 4 1 / /2 x 11 1/2 3 3 /4 x 7 1 /8 1 igging Wire ope Slings 1 1 / x /8 x 5 1 / /8 x /8 x 8 3 /8 1 1 /8 1 1 / x /2 x 6 1 / /2 x 14 1/2 4 3 /8 x 8 3 /8 1 1 /4 1 3 / x /2 x 6 1 / x 16 5 x 9 1 /2 1 3 /8 6 x 37 EIP, IWC 1 1 / x /2 x 6 1 / x 17 1/2 5 x 9 1 /2 1 1 /2 1 3 / x /2 x x /4 x 11 3 / x 32 6 x x 23 1/2 8 x 14 1 /2 2 1 / x 36 7 x /2 x 26 8 x 15 1 /2 2 1 / x /2 x 29 1/2 2 3 / x x / x / x x 90 Note: Larger diameter slings. Basket ratings are based on a minimum D/d of 25. * 1 Ton = 2,000 lbs. ** Minimum sling length when using standard eyes. Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30. (800) entals@entlgh.com 213

28 Wire ope Slings Ton 60 Deg.) IWC 6x19 & 6x37 EIPS Mechanical Splice Bridle Sling This page contains SALE ITEMS ONLY Specifications Permaloc Bridle Slings (With Single Part Body) Wire ope Slings igging ope Dia. 6 x 19 EIP, IWC **Min. Sling Length Eye Hook Cap. (tons) *ated Capacity (tons) Oblong Link Stock Dia * ated Capacity (tons) Oblong Link Stock Dia * ated Capacity (tons) Oblong Link Stock Dia / / / /2 5/ / / /4 3/ / / / /4 7/ / / / / / / / /4 5/ / / /4 3/ / / /4 7/ / / / / / /4 1 1 / / / /4 6 x 37 EIP, IWC 1 1 / / /4 1 3 / / /4 1 1 / /4 1 3 / / /4 Note: Length Tolerances - Single Part Wire ope Slings - Standard length tolerance is plus or minus two rope diameters, or plus or minus 0.5% of the sling length, whichever is greater. The legs of bridle slings, or matched slings are normally held to within one rope diameter. *1 Ton = 2,000 lbs. ** Minimum length based on thimbled eye and eye hook. 214 (800) entals@entlgh.com

29 This page contains SALE ITEMS ONLY Wire ope Slings Ton (Vertical) IWC 6x19 EIP - GAC 7 x 19 Hidden Tucked Multi-Part Specifications Wire ope Class 6 x 19 EIP, FC ope Dia. (in) EIP, FC ated Capacity (tons) Vertical Choker Vertical Basket Min. Sling Length Standard Eye Size (in) W x L 1/ x 6 5/ x 6 3/ x 6 7/ /2 x 7 1/ x 8 9/ /2 x 9 5/ x 10 3/ x 12 igging Wire ope Slings 7/ x x 16 Basket ratings are based on a minimum D/d of 15. Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30. (800) entals@entlgh.com 215

30 Wire ope Slings Ton (Vertical) IWC 6x19 EIP - GAC 7 x 19 Hidden Tucked Multi-Part 3 x 7 x 19 3 x 6 x 19 This page contains SALE ITEMS ONLY 3 Part Cable Specifications Component ope Dia. Sling Body Dia. ated Capacity (tons) Vertical Choker Vertical Basket Min. Sling Length Standard Eye W x L Crescent Thimble Eye Size W x L Slip Thru Thimble Eye Size W x L Wire ope Slings igging 7 x 19 GAC 6 x 19 EIP, IWC 3/16 3/ x 6 2 x /8 x 4 1 /8 1/4 1/ x /4 x /8 x 4 3 /8 5/16 5/ x /4 x /8 x 6 5 /8 3/8 3/ x /4 x /8 x 6 5 /8 7/16 7/ x /2 x /4 x 7 1 /8 1/ x /2 x /4 x 7 1 /8 9/ / x /8 x /8 x 8 3 /8 5/8 1 1 / x /2 x /8 x 8 3 /8 3/4 1 1 / x 22 6 x 12 5 x 9 1 /2 Basket ratings are based on a minimum D/d of x 7 x 19 7 x 6 x 19 Component ope Dia. Sling Body Dia. 7 Part Cable Specifications ated Capacity (tons) Vertical Choker Vertical Min. Sling Length Standard Eye W x L Crescent Thimble Eye Size W x L Slip Thru Thimble Eye Size W x L Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than x 19 GAC 6 x 19 1/8 3/ x 6 2 x /8 x 4 1 /8 3/16 9/ x /4 x /8 x 4 3 /8 1/4 3/ x /4 x /8 x 6 5 /8 5/16 15/ x /4 x 8 1 /2 3 3 /4 x 7 1 /8 3/8 1 1 / /2 x /2 x /4 x 7 1 /8 7/ / x /8 x /8 x 8 3 /8 1/2 1 1 / x /2 x 14 1 /2 4 3 /8 x 8 3 /8 Basket ratings are based on minimum D/d of (800) entals@entlgh.com

31 This page contains SALE ITEMS ONLY Wire ope Slings Ton (Vertical) IWC 6x19 EIP - GAC 7 x 19 Hidden Tucked Multi-Part 6 x 7 x 19 6 x 6 x 19 6 Part Cable Specifications Component ope Dia. Sling Body Dia. ated Capacity (tons) Vertical Choker Vertical Basket Min. Sling Length Standard Eye W x L Crescent Thimble Eye Size W x L Slip Thru Thimble Eye Size W x L 1/8 9/16 x 3/ x 6 2 x /8 x 4 1 /8 7 x 19 GAC 3/16 13/16 x 1/ x /4 x /8 x 4 3 /8 1/4 1 1 /8 x 11/ x /4 x 8 1 /2 3 3 /8 x 6 5 /8 5/ /8 x 7/ x /2 x 11 1 /2 3 3 /8 x 6 5 /8 3/ /16 x x /8 x /4 x 7 1 /8 7/16 2 x 1 3 / x 16 6 x /4 x 7 1 /8 1/2 2 1 /4 x 1 3 / x 18 6 x 17 1 /2 4 3 /8 x 8 3 /8 9/ /2 x 1 1 / x 20 7 x /8 x 8 3 /8 5/ /16 x 1 11 / x 22 7 x 23 1 /2 5 x 9 1 /2 3/4 3 3 /8 x x /2 x /4 x 11 3 /4 Basket ratings are based on a minimum D/d of x 7 x 19 8 x 6 x 19 Component ope Dia. 6 x 19 EIP, IWC Sling Body Dia. 6 Part Cable Specifications ated Capacity (tons) Vertical Choker Vertical Basket Min. Sling Length Standard Eye W x L Crescent Thimble Eye Size W x L Slip Thru Thimble Eye Size W x L igging Wire ope Slings 1/8 9/ x 6 2 x /8 x 4 1 /8 3/16 13/ x /4 x /8 x 4 3 /8 1/4 1 1 / x /4 x /8 x 6 5 /8 5/ / x /2 x /4 x 7 1 /8 3/ / x /8 x /4 x 7 1 /8 7/ x /2 x /8 x 8 3 /8 1/2 2 1 / x 18 6 x 16 5 x 9 1 /2 9/ / x /2 x 18 5 x 9 1 /2 5/ / x 22 7 x /4 x 11 3 /4 3/4 3 3 / x 24 8 x 24 8 x 14 1 /2 Basket ratings are based on a minimum D/d of x 19 GAC 6 x 19 EIP, IWC Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30. (800) entals@entlgh.com 217

32 Wire ope Slings 42 1,224 Ton (Vertical) IWC 6x19 & 6x37 9-Part Braided AVAILABLE FO 9 Part Braided Wire ope Sling Specifications Wire ope Slings igging Composed of 9 Parts of EIP ope 9x6x19 9x6x37 Actual Finished Diameter Eye Length Vertical ated Capacity (tons) Choker Vertical Basket Approximate Wt./Ft. Lbs. 3/ /8 3 1 / /8 4 1 / / /8 5 1 / / / / / / Part Braided Endless Wire ope Sling/Grommet Specifications Diameter Component Parts Body Finished Diameter Vertical ated Capacity (tons) Choker Vertical Basket Approximate Wt./Ft. Lbs. 5/8 2 1 / / /8 3 1 / /8 4 1 / / /8 5 1 / / / / / / (800) entals@entlgh.com

33 AVAILABLE FO Wire ope Slings Sling s Sling s (Approx.) To estimate sling weights, multiply length x Per Foot and add Zero Base plus any additional fittings weights. Specifications ope Dia. (in) Per Foot *Zero Base (lbs.) 1/ / / / / / / / / igging Wire ope Slings 1 1 / / / / / / / / / / * Zero Base accounts for the additional rope and sleeves required to form two standard eyes. (800) entals@entlgh.com 219

34 atchet & Utility Straps - Hooks & Hardware Hardware & Fittings (Used with Tiedowns) This page contains SALE ITEMS ONLY Hardware / Fittings For 2 4 atchet Straps atchet & Utility Straps - Hooks & Hardware igging Hardware / Fittings For 1 Utility Straps Product Description Breaking Strength Working Load Limit C5 1 Light Duty Cam 700 lbs. 265 lbs. C112 1 Heavy Duty Cam 1,500 lbs. 500 lbs D-ing 5,000 lbs. 1,665 lbs Vinyl S-Hook 1,500 lbs. 500 lbs. 07A 1 Flat Snap-Hook 1,500 lbs. 500 lbs LD Boat Hook 4,000 lbs. 1,335 lbs Snap Hook 3,750 lbs. 1,250 lbs Wire Hook 3,000 lbs. 1,000 lbs LD atchet 1,780 lbs. 590 lbs. Product Description Breaking Strength Working Load Limit 22 2 Wire Hook 5,000 lbs. 1,665 lbs Narrow Flat Hook 5,000 lbs. 1,665 lbs STD Flat Hook 10,000 lbs. 3,335 lbs A 2 Flat Side Snap Hook 2 Twisted Snap Hook 2 HD Flat SideSnap Hook 5,000 lbs. 1,665 lbs. 11,000 lbs. 3,665 lbs lbs lbs Flat D-ing 11,000 lbs. 3,665 lbs Forged Snap Hook 10,000 lbs. 3,335 lbs PC. Cluster Hook 11,600 lbs. 3,900 lbs Pear-Grab Hook 2-4 Chain Anchor 16,200 lbs. 5,400 lbs. 10,000 lbs. 3,335 lbs Flat Hook 15,000 lbs. 5,000 lbs Delta ing 20,000 lbs. 6,670 lbs HD atchet 3,000 lbs. 1,000 lbs D-ing 5,000 lbs. 1,665 lbs. Note: Capacity/WLL ratings are only as strong as their weakest components or attachments /8 Dia. ound ing 5,000 lbs. 1,665 lbs HD Wire Hook 22,000 lbs. 7,335 lbs LD atchet 4,000 lbs. 1,335 lbs Short atchet 10,000 lbs. 3,335 lbs. 5130LH 2 Long atchet 10,000 lbs. 3,335 lbs atchet 22,000 lbs. 7,335 lbs atchet 24,000 lbs. 8,000 lbs. Note: Capacity/WLL ratings are only as strong as their weakest components or attahments. 220 (800) entals@entlgh.com

35 AVAILABLE FO oundslings 2,600 90,000 Lbs. (Vertical) EN Series < Length How To Measure Code Color ated Capacity (lbs.) Vertical Choker Basket Specifications Minimum Length (ft) (lbs. / ft) Approximate Measurements Body Dia. elaxed (in) Width at Load (in) Minimum Hardware Dia* (in) EN30 Purple 2,600 2,100 5, /2.2 5/8 1 7/16 EN60 Green 5,300 4,200 10, /2.3 7/8 1 3 /8 5/8 EN90 Yellow 8,400 6,700 16, /8 1 3 /4 3/4 EN120 Tan 10,600 8,500 21, /8 1 7 /8 7/8 EN150 ed 13,200 10,600 26, /8 2 1 EN180 White 16,800 13,400 33, /8 2 1 /8 1 1 /8 EN240 Blue 21,200 17,000 42, /4 2 5 /8 1 3 /16 igging Polyester oundslings EN360 Grey 31,000 24,800 62, /4 3 1 /4 1 1 /2 EN600 Brown 53,000 42, , /4 4 2 EN800 Olive 66,000 52, , /8 4 5 /8 2 1 /8 EN1000 Black 90,000 72, , /8 5 1 /4 2 1 /2 Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30. (800) entals@entlgh.com 221

36 oundslings 6, ,500 Lbs. (Vertical) B6E Series 6-Part Braided AVAILABLE FO < How To Measure Length < < < < < ED W < EL < Polyester oundslings igging Color ated Capacity (lbs.) Vertical Choker Basket Specifications Minimum Length (ft.) (lbs. / ft.) Standard Eye Length (EL) Approximate Measurements Width at Load (W) Thickness at Load Eye Dia. (ED) B6E30 Purple 6,700 5,300 13, / /4 3/4 1 3 /4 5/8 B6E60 Green 13,500 10,800 27, /4 1 1 /8 2 1 B6E90 Yellow 21,400 17,100 42, / /4 1 1 / /4 B6E120 Tan 27,000 21,600 54, / /2 1 5 / /4 1 3 /8 B6E150 ed 33,600 26,800 67, / /4 1 3 /4 2 1 /2 1 1 /2 B6E180 White 42,800 34,200 85, / /4 1 3 /4 Minimum Hardware Dia* B6E240 Blue 54,000 43, , /8 2 1 /4 3 1 /2 1 3 /4 B6E360 Grey 79,000 63, , / /4 2 1 /2 4 1 /4 2 1 /2 B6E600 Brown 135, , , / /4 5 3 B6E800 Olive 168, , , /4 3 1 /2 B6E1000 Black 229, , , / /2 4 1 /2 5 3 /4 4 * This is the smallest recommended connection hardware diameter to be used for a vertical hitch. Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than (800) entals@entlgh.com

37 AVAILABLE FO oundslings 8, ,000 Lbs. (Vertical) B8E Series 8-Part Braided Always use Wear Pads to protect synthetic slings from being cut by load edges. Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30. Color 8 Part ound Braid (B8E) Specifications ated Capacity (lbs.) Vertical Choker Basket Minimum Length (ft.) (lbs. / ft.) Standard Eye Length (EL) Approximate Measurements Width at Load (W) Thickness at Load Eye Dia. (ED) B8E30 Purple 8,800 7,100 17, / / /4 3/4 B8E60 Green 18,000 14,400 36, / /8 B8E90 Yellow 28,500 22,800 57, / /4 1 5 /8 2 1 /2 1 1 /2 B8E120 Tan 36,000 28,800 72, / /4 2 1 /2 1 1 /2 B8E150 ed 44,900 35,900 89, / /8 2 3 /4 1 3 /4 B8E180 White 57,100 45, , /4 2 1 /2 3 1 /4 2 Minimum Hardware Dia* igging Polyester oundslings B8E240 Blue 72,000 57, , /2 2 3 /4 3 3 /4 2 B8E360 Grey 105,400 84, , / /2 3 1 /4 4 1 /2 2 1 /2 B8E600 Brown 180, , , / /4 5 1 /2 3 1 /2 B8E800 Olive 224, , , /2 4 1 /2 6 4 B8E1000 Black 306, , , / /4 5 1 /4 6 1 /2 4 3 /4 (800) entals@entlgh.com 223

38 oundslings 10, ,000 Lbs. (Vertical) KEN Series KeyFlex AVAILABLE FO KeyFlex Capacities and Measurements oundslings igging ated Capacity (lbs.) Vertical Choker Basket Minimum Length (ft.) (lbs. / ft.) Approximate Measurements Body Dia. elaxed Width at Load (W) Minimum Hardware Dia* KEN10K 10,000 8,000 20, /16 11/16 KEN15K 15,000 12,000 30, /8 1 3 /4 7/8 KEN20K 20,000 16,000 40, / /16 KEN25K 25,000 20,000 50, /4 2 1 /8 1 1 /4 KEN30K 30,000 24,000 60, /8 2 1 /8 1 7 /16 KEN40K 40,000 32,000 80, /4 2 3 /4 1 1 /2 KEN50K 50,000 40, , /8 2 7 /8 1 3 /4 KEN60K 60,000 48, , /8 2 KEN70K 70,000 56, , /8 3 1 /4 2 3 /16 KEN80K 80,000 64, , /4 3 1 /2 2 3 /8 KEN90K 90,000 72, , /2 3 7 /8 2 3 /8 KEN100K 100,000 80, , /4 4 1 /4 2 1 /2 KEN125K 125, , , /8 2 5 /8 KEN150K 150, , , /4 5 1 /4 2 7 /8 KEN175K 175, , , /2 5 3 /4 3 1 /8 KEN200K 200, , , /4 6 1 /8 3 3 /8*- 224 (800) entals@entlgh.com

39 AVAILABLE FO Material: bow and pin high tensile steel, Grade 6, quenched and tempered Safety Factor: MBL equals 6 x WLL Standard: En and meets performance requirements of US Fed. Spec. -C-271 Type IVA Class 2, Grade A Shackles Ton Screw Pin Finish: hot dipped galvanized Temperature ange: -20 C up to +200 C Certificates: at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity. G-4161 Specifications (mm) Working Load Limit Diameter Bow Diameter Pin Diameter Eye Width Eye Width Inside Length Inside Width Bow Length Length Bolt Width Each tons a mm b mm c mm d mm e mm f mm g mm h mm i mm j mm kg Working Load Limit Diameter Bow Diameter Pin Diameter Eye Width Eye Specifications Width Inside Length Inside Width Bow Length Length Bolt tons a in. b in. c in. d in. e in. f in. g in. h in. i in. j in. lbs /16 1/4 1/2 3/16 3/8 7/8 5/ / / / /4 5/16 21/32 9/32 15/ /32 25/ / / / /16 3/8 25/32 11/32 17/ /4 7/8 2 7 / / / /8 7/16 7/8 13/32 21/ / / /2 2 1 / / /16 1/2 1 1 /32 7/16 3/ / / / / /2 5/ /32 1/2 7/ /4 3 1 /2 2 7 /8 2 9 / /8 3/4 1 9 /16 5/8 1 1 / / / / / / /4 7/ /16 3/4 1 7 / / / / / /16 7/ / / / / / / /8 2 5 /16 31/ / / / / / / /8 1 1 / / / / / / / / / /4 1 3 / / / / / / / / /8 1 1 /2 3 5 / /8 2 1 /4 5 1 /4 3 5 / / / / /2 1 5 / / /2 2 3 /8 5 3 / / / / / / / / / / / / /4 4 3 / / / /4 5 7 / / / / /4 2 9 / /8 2 1 /4 3 3 /4 8 3 /4 6 5 / / / / /2 2 3 / / / / /4 7 3 / / / / Width Bow Each igging Shackles (800) entals@entlgh.com 225

40 Shackles Ton Bolt Type Material: bow and pin high tensile steel, Grade 6, quenched and tempered Safety Factor: MBL equals 6 x WLL Standard: En and meets performance requirements of US Fed. Spec. -C-271 Type IVA Class 3, Grade A Finish: hot dipped galvanized Temperature ange: -20 C up to +200 C Certificates: at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity AVAILABLE FO Shackles igging G-4163 G-4163 Working load limit tons Diameter bow a mm Diameter pin b mm Diameter eye c mm Width eye d mm Specifications (mm) Width inside e mm Length inside f mm Width bow g mm Length h mm Length bolt i mm Width j mm Thickness nut k mm each Working load limit tons Diameter bow a in. Diameter pin b in. Diameter eye c in. Width eye d in. Specifications Width inside e in. Length inside f in. Width bow g in. Length Length bolt i in. Width Thickness nut k in. kg each h in. j in. lbs /4 5/16 21/32 9/32 15/ /32 25/ / / /32 5/ /16 3/8 25/32 11/32 17/ /4 7/8 2 7 / / /16 3/ /8 7/16 7/8 13/32 21/ / / /2 2 3 / /16 5/ /16 1/2 1 1 /32 7/16 3/ / / / /8 2 7/ /2 5/ /32 1/2 7/ /4 3 1 /2 3 7 / /32 1/ /8 3/4 1 9 /16 5/8 1 1 / / / / / /16 21/ /4 7/ /16 3/4 1 7 / / /2 3 1 /2 3/ / /16 7/ / / / / /8 4 1 /32 7/ /8 2 5 /16 31/ / / / / / /32 31/ /8 1 1 / / / / / / / / / / /4 1 3 / / / / / / / / /8 1 1 /2 3 5 / /8 2 1 /4 5 1 /4 3 5 / / /4 6 3 /8 1 5 / /2 1 5 / / /2 2 3 /8 5 3 / / / / /8 3/ / / / / / / / /2 29/ /4 4 3 / / / /4 5 7 / / / /8 1 1 / /4 2 9 / /8 2 1 /4 3 3 /4 8 3 /4 6 5 / / / / / /2 2 3 / / / / /4 7 3 / / / / /4 6 3 /8 2 7 / / / / / / / (800) entals@entlgh.com

41 AVAILABLE FO Material: bow and pin high tensile steel, Grade 8, quenched and tempered Safety Factor: MBL equals 5 x WLL Finish: hot dipped galvanized Shackles 120 1,500 Ton Alloy Bolt Type certificate of basic raw material, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 150 tons are supplied with a Lloyd s egister of Shipping Certificate on proof load Temperature ange: -20 C up to +200 C Certificates: at no extra charges this product can be supplied with a works certificate, Note: +5% forging tolerance on inside width and length P-6036 Specifications (mm) Working load limit tons Diameter bow a mm Diameter pin b mm Diameter eye c mm Width eye d mm Width inside e mm Length inside f mm Width bow g mm Length h mm Length bolt i mm Width j mm Thickness nut , , , , , , , , , , , , , , ,456 1, , ,556 1,025 1, ,291 Working load limit tons Diameter bow a in. Diameter pin b in. Diameter eye c in. Width eye d in. Width inside e in. Length inside f in. Width bow g in. Length h in. Length bolt i in. Width j in. k mm Thickness nut k in /4 3 3 /4 8 3 / / / /4 9 3 / / / / / /8 4 1 /4 9 3 /8 4 1 / / / / / / / / / / / / / / / / /8 2 3 / /8 5 1 / / / / / / / /4 2 9 / / / / / / / / / / / / / / / / / / / / / /4 1, / / / / / / / / / / /4 1, /8 8 1 / / / / / / / / /2 2 3 /4 1, / / /8 8 1 / / / / / / / /4 2, / / / / / / / / / /4 2, / / / / / / / / / / /4 2, / / / / / / / / / /4 3, / / / / / / / / / / /4 4, / / / / / / / / / /4 2 3 /4 5,291 Specifications (in) each kg each lbs. igging Shackles (800) entals@entlgh.com 227

42 Shackles Ton Screw Pin Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20 C. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. AVAILABLE FO Working Load Limit permanently shown on every shackle. Forged Quenched and Tempered, with alloy pins. Charges for proof testing and material certification when requested at the time of order. Hot Dip galvanized or Self Colored. Fatigue rated. Capacities 1/3 thru 55 metric tons. Look for the ed Pin the mark of genuine Crosby quality. G-209 S-209 G-213 S-213 Specifications Shackles igging Nominal Size Working Load Limit*(t) Nominal Size Working Load Limit* (t) Each (lbs.) G-209 Galv. S-209 S.C. G-213 Galv. S-213 S.C. G-209 S-209 G-213 S-213 3/16 1/ /4 1/ /16 3/ / / / / /8 3 1 / /4 4 3 / /8 6 1 / / /8 9 1 / / / / / / /2 Dimensions Tolerance + / - A B C D E F G H L M N P C A 3/16 1/ /4 1/ /16 3/ / / / / /8 3 1 / /4 4 3 / /8 6 1 / / /8 9 1 / / / / / / /2 Dimensions + Furnished in screw pin only. * Note: Maximum Proof Load is 2.0 times the working load limit. Minimum ultimate strength is 6 times the Working load limit. 228 (800) entals@entlgh.com

43 AVAILABLE FO Working Load Limit permanently shown on every shackle. Forged Quenched and Tempered, with alloy pins. Capacities 1/3 thru 55 metric tons. Look for the ed Pin the mark of genuine Crosby quality. Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Certification must be requested at time of order. Shackles Ton Bolt Type Shackles 85 metric tons and larger can be provided as follows: Non Destructive Tested, Serialized Pin and Bow, Material Certification (Chemical), Certification must be requested at time of order. Hot Dip galvanized or Self Colored. Fatigue rated. Specifications G-2130 S-2130 G-2150 S-2150 Working Load Limit* 2130 (t) G-2130 Galv. S-2130 Each (lbs.) S.C. G-2150 Galv. S-2150 S.C. 3/16 1/3** /4 1/ /16 3/ / / / / /8 3 1 / /4 4 3 / /8 6 1 / / /8 9 1 / / / / / / / ** Nominal Shackle Size 3 1 / Each (lbs.) 120** ** Dimensions Nominal Working Load Dimensions (in) Tolerance + / - Shackle Size Limit* (t) A B C D E F G H K L M N P C & G A 3/16 1/3** /4 1/ /16 3/ / / / / /8 3 1 / /4 4 3 / /8 6 1 / / /8 9 1 / / / / / / / ** /2 120** ** *Note: Maximum Proof Load is 2.0 times the working load limit. Minimum ultimate strength is 6 times the working load limit. **Furnished in Anchor style only. + Individually Proof Tested with certification and furnished with round head bolts with welded handles. igging Shackles (800) entals@entlgh.com 229

44 Shackles Ton Alloy Bolt Type Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20 C. Working Load Limit is permanently shown on every shackle. Alloy bows, Alloy bolts. Quenched and Tempered. All sizes are individually proof tested to 2.0 times the Working Load Limit. Shackles 200 metric tons and larger are provided as follows. Non Destructive Tested. Serialized Pin and Bow. Material Certification (chemical). Certification must be requested at time of order. Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel 200 thru 400 metric tons. Pins are galvanized and painted red. AVAILABLE FO G-2140 S-2140 Specifications Shackles igging Nominal Shackle Size Working Load Limit* (t) G-2140 Galv. S-2140 S.C Each (lbs.) 1 1 / / / / /4** ** ** ** ,102.0 Nominal Shackle Size Working Load Limit* (t) Dimensions Dimensions Tolerance + / - A B C D E F G H J K L A E 1 1 / / / / /4** ** ** ** *Note: Maximum Proof Load is 2.0 times the working load limit. Minimum ultimate load is 4 times the working load limit on 200 thru 400 metric tons. For sizes 30 thru 175 metric tons, minimum ultimate load is 5.4 times the working load limit. **Cast Alloy steel. + Furnished with round head bolts with welded handle. 230 (800) entals@entlgh.com

45 AVAILABLE G-2160 Working Load Limit (t)* FO G-2160 Each (lbs.) All sizes Quenched and Tempered for maximum strength. Forged alloy steel from 30 through 300 metric tons. Cast alloy steel from 400 through 1,000 metric tons. Sizes 300 tons and smaller are proof tested to 2 times the Working Load Limit. Sizes 400 tons and larger are tested to 1.33 times Working Load Limit. All ratings are in metric tons, embossed on side of bow. Bows and pins are furnished Dimetcoted. All Pins are Dimetcoted then painted red. Greatly improves wearability of wire rope slings. Can be used to connect HIGH STNGTH Synthetic Web Slings, HIGH STNGTH Synthetic ound Slings or Wire ope Slings. Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble. Increases usable sling strength minimum of 15%. Dimensions Dimensions Shackles 18 1,000 Ton Wide Body Pin is non-rotating, with weld on handles for easier use (300t and larger). All 2160 shackles are individually proof tested and magnetic particle inspected. Crosby certification at time of order. Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B Shackles requiring ABS, DNV, Lloyds and other certifications are upon special request and must be specified at time of order. Shackles are produced in accordance with certified lifting appliance requirements. Non Destructive Testing. Serialization / Identification. Material Testing (Physical / Chemical / Charpy). Proof Testing. A B +/-.25 C D +/-.02 E G H J K P , , , , , , , igging Shackles *Ultimate load is 5 times the working load limit. + Forged Alloy Steel. Proof load is 2 times the working load limit. ++ Cast Alloy Steel. Proof load is 1.33 times the working load limit. (800) entals@entlgh.com 231

46 Shackles Ton Bolt Type - Alloy Bolt Type - Wide Body Bolt Type Shackle Wide Body Shackle AVAILABLE FO Shackles Dimensions igging Working Load Limit (ton) Type (lbs.) Dimensions A B C D E F G L X Y 75 Wide Body / /4 4 5 / / / / / / / / / Wide Body / / / / / / / / / / / Wide Body / / / /4 7 7 / / / / / / /8 150 Bolt Type / / /4 9 1 / / / / / Alloy-Bolt Type /4 5 1 / /4 9 1 / / / / / Wide Body / / / / / / / / / /4 400 Bolt Type /2 6 7 /8 9 1 / / / / / / /8 500 Wide Body / / / / / / / / / / / Alloy-Bolt Type / / / / / / / / /4 600 Wide Body / / / / / / / / / / /4 700 Wide Body / / / / / / / / / / /8 232 (800) entals@entlgh.com

47 This page contains SALE ITEMS ONLY Swivel Hoist ing ,000 Lbs. H-125 UNC Thread Top washer has the following features: The working Load limit and ecommended Torque value are permanently stamped into each washer. Washer is color coded for easy identification ed UNC thread. Bolt Size Identification The size of the bolt will be stated as in the following example. Illustration shows meaning of each dimension given. H-125 Working Load Limit* (lbs.) Torque in Ft. lbs. Bolt Size A Effective Thread Projection Length B Specifications C Dimensions D adius E Diameter F G H Est. Each (lbs.) /16 18 x , /8 16 x , /2 13 x , /2 13 x , /8 11 x , /8 11 x , /4 10 x , /4 10 x , /4 10 x , /4 10 x , /8 9 x , /8 9 x , x , x , /4 7 x , /2 6 x ,000 1, /2 x *Ultimate load is 5 times the working load limit. + Long bolts are designed to be used with soft metal (i.e. aluminum) work piece. While the long bolts may also be used with ferrous metal (i.e. steel & iron) work piece, short bolts are designed for ferrous work pieces only. ++ Bolt specification is a Grade 8 Alloy socket head cap screw to ASTM A574. All threads listed are UNC - 3A. igging Swivels (800) entals@entlgh.com 233

48 Swivels 3 45 Ton S.C. S-2 Jaw & Jaw Specifications AVAILABLE FO Swivel Number (type) S.C. Working Load Limit* (metric tons) Wire ope Size Each (lbs.) 3-S / S / S / S / S / S / S / Swivels igging S-3 Jaw & Eye S-5 Eye & Eye 5-S / S / S / S / S / /2 -S /2 3/ /2 -S /2 3/ /2 -S /2 3/ /2 -S /2 3/ /2 -S /2 3/ /2 -S /2 3/ S / S / S / S / S / S / S S S S S S S S S S S S S S S S S S S S S S S S Individually Proof of tested to 2 times the working load limit. Ultimate load is 5 times the working load limit. *LGH only stocks 5-2 Jaw & Jaw and S-3 Jaw & Eye for rental. S-1 Jaw & Hook S-4 Eye & Jaw S-6 Eye & Hook 234 (800) entals@entlgh.com

49 AVAILABLE FO Swivels 3 45 Ton S.C. Designed to swivel under load. All swivels individually proof tested with certification. All hooks furnished with latches assembled. All jaws complete with bolts, nuts and cotter pins. Pressure lube fitting provided. NOT TO BE USED ON DEMOLITION (WCKING) BALLS. Other types and capacities up to 600 tons, to meet your requirements. IMPOTA Crosby Swivels should only be used with the recommended wire rope. Contact the wire rope manufacturer for the proper wire rope to be used with Crosby Swivels. S-1 Jaw & Hook S-2 Jaw & Jaw S-3 Jaw & Eye S-4 Eye & Jaw S-5 Eye & Eye S-6 Eye & Hook igging Swivels Dimensions Working Load Limit* (metric tons) A B C D E F G H J K L M N P Q S T V O / * *Individually Proof tested to 2 times the working load limit. Ultimate load is 5 times the working load limit. * LGH only stocks S-2 Jaw & Jaw and S-3 Jaw & Eye for rental. (800) entals@entlgh.com 235

50 Swivels 3 30 Ton EE 12EE Eye & Eye AVAILABLE FO Swivels igging Dimensions Number A Overall Length B Net Length F Swivel Diameter Pin to Obstruction SE Pin to End of Fitting T Thickness of Eye U Hole Diameter Eye & Eye Swivels 3EEM EE EE EE EE EE EE (800) entals@entlgh.com

51 AVAILABLE FO 2VD2 Swivels 5 Ton Insulating Link, Non-Swiveling Dimensions igging Swivels Capacity* (Tons) A** B C D E F G H (Lbs.) 2VD Dimensions in inches *5:1 Mech Design Factor **Link profile varies depending on WLL. (800) entals@entlgh.com 237

52 Wire ope Clips G-450 & SS-450 Ea ch base has a Product Identification Code (PIC) for material traceability, the name COSBY or CG, and a size forged into it. Sizes 1/8 through 2 1 /2 have forged bases. Entire Clip Galvanized to resist corrosive and rusting action. Only Genuine Crosby Clips have a ed U-BOLT for instant recognition. All Clips are individually bagged or tagged with proper application instructions and warning information. Clip sizes up through 1 1 /2 have rolled threads. This page contains SALE ITEMS ONLY SS-450 Specifications Wire ope Clips igging ope Size G-450 Galv. Std. Package Qty. Per 100 (lbs.) Dimensions (in) A B C D E F G H * 1/ * 3/ / / / / / / / / / / / / / / Bulk / Bulk Bulk 1, / Bulk 1, / Bulk 1, / Bulk 2, Bulk 3, / Bulk 4, G-450 The SS Stainless Steel Wire ope Clips Each base has a Product Identification Code (PIC) for material traceability, the name COSBY or CG and a size forged into it. Available in sizes 1/8 through 5/8. Entire clip is made from 316 Stainless Steel to resist corrosive and rusting action. All components are Electro Polished. All Clips are individually bagged or tagged with proper application instructions and warning information. ope Size SS-450 Stock No. Per 100 (lbs.) Specifications Dimensions A B C D E F G H 1/ / / / / / (800) entals@entlgh.com

53 AVAILABLE FO Turnbuckles ,000 Lbs. Eye & Eye End fittings are Quenched and Tempered, bodies heat treated by normalizing. Hot dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 2 1 /2, a shackle one size smaller can be reeved through the eye. Specifications Thread Diameter & Take Up Number Working Load Limit (lbs.) Each (lbs.) A J (open) K (closed) Dimensions M N (open) (closed) S X (closed) 1/4 x /16 x 4 1 / /8 x , BB 1/2 x , /2 x , /8 x , /8 x , /4 x , /4 x , /4 x , /8 x , /8 x , x , x , x , x , /4 x , /4 x , /4 x , /2 x , /2 x , /2 x , /4 x , /4 x , x , /2 x , /4 x , * Proof load is 2.5 times the working load limit. Ultimate load is 5 times the working load limit. + Mechanical Galvanized igging Turnbuckles Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 Class 4, and ASTM F-1145, except for those provisions required of the contractor. (800) entals@entlgh.com 239

54 Turnbuckles ,000 Lbs. Jaw & Eye End fittings are Quenched and Tempered, bodies heat treated by normalizing. Hot dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 2 1 /2, a shackle one size smaller can be reeved through the eye. Forged jaw ends are fitted with bolts and nuts for 1/4 through 5/8 and pins and cotters on 3/4 through 2 3 /4 sizes Specifications AVAILABLE FO Turnbuckles igging Thread Diameter & Take Up Working Dimensions Number Load Limit Each (lbs.) (lbs.) A B E (closed) G J K M N (open) (closed) (open) (closed) S X (closed) BB 1/4 x /16 x 4 1 / /8 x , /2 x , /2 x , /2 x , /8 x , /8 x , /8 x , /4 x , /4 x , /4 x , /4 x , /8 x , /8 x , x , x , x , x , /4 x , /4 x , /4 x , /2 x , /2 x , /2 x , /4 x , /4 x , x , /2 x , /4 x , * Proof load is 2.5 times the working load limit. Ultimate load is 5 times the working load limit. + Mechanical Galvanized Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 Class 4, and ASTM F-1145, except for those provisions required of the contractor. 240 (800) entals@entlgh.com

55 AVAILABLE FO Turnbuckles ,000 Lbs. Jaw & Jaw End fittings are Quenched and Tempered, bodies heat treated by normalizing. Hot dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 2 1 /2, a shackle one size smaller can be reeved through the eye. Forged jaw ends are fitted with bolts and nuts for 1/4 through 5/8 and pins and cotters on 3/4 through 2 3 /4 sizes Specifications Thread iameter & Take Up Working Dimensions Number Load Limit Each (lbs.) (lbs.) A B E (closed) G J K M N (open) (closed) (open) (closed) BB 1/4 x /16 x 4 1 / /8 x , /2 x , /2 x , /2 x , /8 x , /8 x , /8 x , /4 x , /4 x , /4 x , /4 x , /8 x , /8 x , x , x , x , x , /4 x , /4 x , /4 x , /2 x , /2 x , /2 x , /4 x , /4 x , x , /2 x , /4 x , *Proof load is 2.5 times the working load limit. Ultimate load is 5 times the working load limit. + Mechanical Galvanized igging Turnbuckles Meets the performance requirements of Federal Specifications FF-T-791b, Type 1, Form 1 Class 4, and ASTM F-1145, except for those provisions required of the contractor. (800) entals@entlgh.com 241

56 Modular Spreader Beams Modulift Spreader Beams AVAILABLE FO Available to ent from Lifting Gear Hire The Modulift Spreader Beam System, to rent from LGH is a range of beams that offer a modular span capability with a wide range of loading capacities. Unlike fixed length spreader beams, the flexibility of the Modulift Spreader Beam System means that even the most awkward loads can be accommodated. Using a range of different components together means an almost infinite number of configurations are possible to suit virtually any lifting scenario. Versatility The Modulift Spreader Beam System offers almost limitless versatility with spreaders ranging from 3 feet to 100 feet in 1 to 2 foot increments depending on which size spreader is used. s include carrying capacities from 24T up to 1200T (MOD24 - MOD1000/1200). Accessories for the system are including corner units for square and rectangular frames. Modular Spreader Beams igging Designed for easy one-man assembly, the Modulift Spreader Beam System is both portable and lightweight. Most of the beams and end units within the system can be easily manually handled on site without the need for lifting equipment, reducing both the time needed for set-up and expensive crane time. The majority of the Modulift Spreader Beam System components are light enough to be transported in a small van or pick-up, helping to cut transportation costs. Benefits of enting a Modulift Spreader Beam from LGH Lightweight portable design Quick and easy assemble/dismantle In most cases a one man operation Easily transported Flexible configurations to meet a variety of demands Uses conventional shackles and accessories educed labor costs educed downtime educed crane time and associated rental costs educed transportation costs No need to invest, store and maintain large numbers of fixed spreaders one system will do it all. No specialist accessories required. End Unit Sub-Assy Strut 242 (800) entals@entlgh.com

57 VA AV A AVAILABLE FO Modular Spreader Frames Ton CMOD 50 Corner Unit Assembled Frame Table 1: Component List Part Description α Strut α = Base to Sling Angle (BSA) Corner Unit P7 igging Modular Spreader Beams P1 Corner Unit 345 Lbs. P1 P2 - P6 P9 P8 P2 12 Ft. Strut 285 Lbs. Span P3 6 Ft. Strut 168 Lbs. Fig. 1. Typical Spreader Assembly P4 3 Ft. Strut 109 Lbs. P5 2 Ft. Strut 90 Lbs. P6 1 Ft. Strut 70 Lbs. P7 35T Shackle 44 Lbs. P8 25T Shackle 31 Lbs. P9 Bolts, Nuts And Washers P10 50T Drop Link 24 Lbs. CMOD 50 - FAME SPECIFICATION ated at a maximum of 60 tons WLL please see table 2 for WLL's at specific spans Base to Sling Angle, α, no less than 45 degrees Corner Units are rated at 15 tons each (60t combined capacity) Bolt tightening torque: 110 lb ft. Spanner size required: 1.18 inches ecommended additional equipment: Torque Wrench, Podger Spanner and ing Spanner Max number of struts allowed in assembly: 5 per side Assemble longer struts in the center of the configuration Sling angle is crucial to safe use of frame (800) entals@entlgh.com 243

58 Modular Spreader Beams Ton CMOD 50 Corner Modular Beam AVAILABLE FO Load charts only to be used in conjunction with CMOD 50 User Instructions First pick the span required for your frame (e.g. 10' x 28') and the Sling Angle (we recommend 60 BSA where possible), then check the WLL via the appropriate table. ead the table by locating the lower span on the y axis of the chart and the larger on the x. The cell which you are referred to will indicate the WLL for your chosen span. If your exact span is not noted in the table, then please round up or down to the values that will give you the lowest WLL (to ensure no overloads are applied). Please contact Lifting Gear Hire for confirmation on your WLL if required. WLL given in tons. CMOD 50: WWL / 60 BSA CMOD 50: WWL / \ 45 BSA Modular Spreader Beams Span (ft) Span (ft) igging Assembled Frame: 244 (800) entals@entlgh.com

59 AVAILABLE FO NOTE: Top Slings shall be properly load-rated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top WLL Min. sling metric top WLL length tons sling metric (ft in) (tonnes) length tons (ft in) (tonnes) Modular Spreader Beams Ton Mod 24 Table 2: Load V. Span Min. top sling length (ft in) ecommended Configuration EU - End Unit (1.5 ft) Beam (lbs.) EU EU EU 1 EU 177 ated at 24t WLL at 11 ft. span. See Load Table for WLL at spans greater than 11 ft. Base sling angle, α, 45 degrees or greater. End Units & Drop Links are rated at 12t (24t combined capacity). Bolt tightening torque: 110 pound-foot. Part ef: Description Item lbs. P1 End Unit (1 1 /2 ft.) 36 P2 Drop Link 11 P3 6 ft. Strut 80 P4 4 ft. Strut 56 P5 2 ft. Strut 37 P6 1 ft. Strut 26 P7 17t Shackle 18 P8 12t Shackle 11 P9 Table 1: Component List M20x50 Grade 8.8 HT Bolts, Nuts & Wachers Beam weights calculated without top rigging EU 2 EU EU 2 1 EU EU 4 EU EU 4 1 EU EU 6 EU EU 6 1 EU EU 6 2 EU EU EU EU 4 6 EU EU EU EU 6 6 EU EU EU EU EU EU EU EU EU 367 igging Modular Spreader Beams Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to safe use of spreader Typical Spreader Assembly EU EU EU EU EU EU EU EU EU EU 454 α P EU EU EU EU 473 P8 P1 Span P3 P6 P9 P2 Beam weights calculated without top rigging. (800) entals@entlgh.com 245

60 Modular Spreader Beams igging Modular Spreader Beams Ton Mod 50 Span (ft.) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. Min. WLL WLL top top metric metric sling sling tons tons length length (tonnes) (tonnes) (ft in) (ft in) Table 2: Load v. Span Min. top sling length (ft in) ecommended Configuration EU - End Unit (1.5 ft) Beam (lbs.) EU EU EU 1 EU EU 2 EU EU 3 EU EU 3 1 EU EU 3 2 EU EU 6 EU EU 6 1 EU EU 6 2 EU EU 6 3 EU EU EU EU EU EU 12 EU EU 12 1 EU EU 12 2 EU EU 12 3 EU EU EU EU EU EU 6 12 EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU 1399 AVAILABLE FO NOTE: Top Slings shall be properly load-rated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 50t WLL at 20 ft. span. See Load Table for WLL at spans greater than 20 ft. Base sling angle, α, 45 degrees or greater. End Units & Drop Links are rated at 25t (50t combined capacity). Bolt tightening torque: 110 pound-foot. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to safe use of spreader Typical Spreader Assembly P9 α P1 Part ef: Table 1: Component List Description Span P3 P7 Item lbs. P1 End Unit (1 1 /2 ft.) 84 P2 Drop Link 24 P3 12 ft. Strut 285 P4 6 ft. Strut 168 P5 3 ft. Strut 109 P6 2 ft. Strut 90 P7 1 ft. Strut 70 P8 35t Shackle 44 P9 35t Shackle 44 P10 M20x65 Grade 8.8 HT Bolts, Nuts & Washers Beam weights calculated without top rigging. P10 P2 P8 Beam weights calculated without top rigging 246 (800) entals@entlgh.com

61 AVAILABLE FO Modular Spreader Beams Ton Mod 110 Table 2: Load v. Span NOTE: Top Slings shall be properly load-rated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 110t WLL at 24 ft. span. See Load Table for WLL at spans greater than 24 ft. Base sling angle, α, 45 degrees or greater. End Units & Drop Links are rated at 55t (110t combined capacity). Bolt tightening torque: 110 pound-foot. Part ef: Max number of struts allowed in spreader assembly: 6 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to safe use of spreader. Do not rig the lower slings more than 6 degrees from vertical. P12 α P1 Description Typical Spreader Assembly Span Item lbs. P1 End Unit (3 ft.) 379 P2 Drop Link 99 P3 20 ft. Strut 1,170 P5 10 ft. Strut 650 P6 8 ft. Strut 540 P7 6 ft. Strut 440 P8 4 ft. Strut 345 P9 2 ft. Strut 230 P10 1 ft. Strut 185 P11 85t Shackle 137 P12 55t Shackle 87 P13 Table 1: Component List M20x65 HT Bolts, Nuts & Washers Beam weights calculated without top rigging. P3 P10 P13 P2 P11 Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.) Beam (lbs.) '1'' EU EU 1, '10'' EU 1 EU 1, '6'' EU 2 EU 1, '2'' EU 2 1 EU 1, '11'' EU 4 EU 1, '7'' EU 4 1 EU 1, '4'' EU 6 EU 1, '0'' EU 6 1 EU 2, '8'' EU 8 EU 1, '5'' EU 8 1 EU 2, '1'' EU 10 EU 2, '11'' EU 10 1 EU 2, '7'' EU 10 2 EU 2, '4'' EU EU 2, '0'' EU 10 4 EU 2, '8'' EU EU 2, '5'' EU 10 6 EU 2, '1'' EU EU 2, '10'' EU 10 8 EU 2, '6'' EU EU 2, '2'' EU 20 EU 2, '11'' EU 20 1 EU 2, '7'' EU 20 2 EU 2, '4'' EU EU 2, '0'' EU 20 4 EU 2, '10'' EU EU 3, '6'' EU 20 6 EU 3, '2'' EU EU 3, '11'' EU 20 8 EU 3, '7'' EU EU 3, '4'' EU EU 3, '0'' EU EU 3, '8'' EU EU 3, '5'' EU EU 3, '1'' EU EU 3, '10'' EU EU 3, '6'' EU EU 3, '2'' EU EU 3, '11'' EU EU 3, '8'' EU EU 3, '5'' EU EU 3, '1'' EU EU 3, '10'' EU EU 3, '6'' EU EU 4, '2'' EU EU 4, '11'' EU Eu 4, '7'' EU EU 4, '4'' EU EU 4, '0'' EU EU 4, '8'' EU EU 4, '5'' EU EU 4, '1'' EU EU 4, '7'' EU EU 4, '7'' EU EU 4,811 Beam weights calculated without top rigging. igging Modular Spreader Beams (800) entals@entlgh.com 247

62 Modular Spreader Beams igging Modular Spreader Beams Ton Mod 110H Span (ft) WLL metric tons (tonnes) Table 2: Load v. Span Base to Sling Angle (BSA) α Min. Min. WLL WLL top top metric metric sling sling tons tons length length (tonnes (tonnes) (ft in) (ft in Min. top sling length (ft in ecommended Configuration EU - End Unit (3 ft) Beam (lbs.) EU EU 1, EU 1 EU 2, EU 2 EU 2, EU 2 1 EU 2, EU 4 EU 2, EU 4 1 EU 2, EU 6 EU 2, EU 6 1 EU 2, EU 8 EU 2, EU 8 1 EU 2, EU 10 EU 2, EU 10 1 EU 2, EU 10 2 EU 2, EU EU 2, EU 10 4 EU 2, EU EU 3, EU 10 6 EU 2, EU EU 3, EU 10 8 EU 3, EU EU 3, EU 20 EU 3, EU 20 1 EU 3, EU 20 2 EU 3, EU EU 3, EU 20 4 EU 3, EU EU 3, EU 20 6 EU 3, EU EU 3, EU 20 8 EU 3, EU EU 3, EU EU 3, EU EU 3, EU EU 3, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 4, EU EU 5, EU EU 4, EU EU 5,275 Beam weights calculated without top rigging *Spans in 1 foot increments AVAILABLE FO ated at 170t WLL at 28 ft. span. See Load Table for WLL at spans greater than 28 ft. Base sling angle, α, 45 degrees or greater. End Units & Drop Links are rated at 85t (170t combined capacity). Bolt tightening torque: 110 pound-foot. Max number of struts allowed in spreader assembly: 6 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to safe use of spreader. Do not rig the lower slings more than 6 degrees from vertical. P12 NOTE: Top Slings shall be properly load-rated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. α P1 Part ef: Description Typical Spreader Assembly Span P3 P10 P13 Item lbs. P1 End Unit (3 ft.) 384 P2 Drop Link 171 P3 20 ft. Strut 1,170 P5 10 ft. Strut 650 P6 8 ft. Strut 540 P7 6 ft. Strut 440 P8 4 ft. Strut 345 P9 2 ft. Strut 230 P10 1 ft. Strut 185 P11 120t Shackle 243 P12 85t Shackle 137 P13 Table 1: Component List M20x65 HT Bolts, Nuts & Washers Beam weights calculated without top rigging. P2 P (800) entals@entlgh.com

63 AVAILABLE Part ef: Description /Item lbs. P1 Mod 110 End Unit 379 P2 Mod 110 Drop Link 99 P3 20 ft. Strut 3049 P4 10 ft. Strut 1744 P5 5 ft. Strut 1094 P6 4 ft. Strut 963 P7 3 ft. Strut 832 P8 2 ft. Strut 701 P9 1 ft. Strut 571 P10 Mod 400/110 Cone Adaptor 441 P11 85t Bolt Shackle 137 P12 55t Bolt Shackle 87 P13 FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 110t WLL at 76 ft. span. Base sling angle, α, 45 degrees or greater. End Units & Drop Links are rated at 55t (110t combined capacity). Bolt tightening torque: 184 pound-foot (M24); 110 pound-foot (M20) Table 1: Component List MOD: 400 M24 x 90, Grade 8.8, HT Bolts, Nuts & Washers MOD: 110 M20 x 65, Grade 8.8, HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to safe use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Modular Spreader Beams Ton Mod 400/110H Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU - End Unit (3 ft), CA - Cone Adaptor (2 ft) To calculate the WLL at intermediate spans utilizing the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU EU 1, EU CA CA EU 2, EU CA 2 CA EU 2, EU CA 4 CA EU 3, EU CA 5 1 CA EU 3, EU CA 5 3 CA EU 4, EU CA 10 CA EU 3, EU CA 10 2 CA EU 4, EU CA 10 4 CA EU 4, EU CA CA EU 5, EU CA CA EU 5, EU CA 20 CA EU 5, EU CA 20 2 CA EU 5, EU CA 20 4 CA EU 6, EU CA CA EU 6, EU CA CA EU 7, EU CA CA EU 6, EU CA CA EU 7, EU CA CA EU 7, EU CA CA EU 8, EU CA CA EU 8, EU CA CA EU 8, EU CA CA EU 8, EU CA CA EU 9, EU CA CA EU 9, EU CA CA EU 10, EU CA CA EU 9, EU CA CA EU 10, EU CA CA EU 10, EU CA CA EU 11, EU CA CA EU 11, EU CA CA EU 11, EU CA CA EU 11, EU CA CA EU 12, EU CA CA EU 12, EU CA CA EU 13,087 Beam weights calculated without top rigging and may vary depending on strut configuration. *Spans in 1 foot increments. igging Modular Spreader Beams Typical Spreader Assembly α P10 P11 P12 P1 Span P3 P9 P13 P2 (800) entals@entlgh.com 249

64 Modular Spreader Beams igging Modular Spreader Beams Ton Mod 400/110H Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU - End Unit (3ft), CA - Cone Adaptor (2ft) To calculate the WLL at intermediate spans utilising the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU EU 1, EU CA CA EU 2, EU CA 2 CA EU 3, EU CA 4 CA EU 3, EU CA 5 1 CA EU 4, EU CA 5 3 CA EU 4, EU CA 10 CA EU 4, EU CA 10 2 CA EU 5, EU CA 10 4 CA EU 5, EU CA CA EU 6, EU CA CA EU 6, EU CA 20 CA EU 5, EU CA 20 2 CA EU 6, EU CA 20 4 CA EU 6, EU CA CA EU 7, EU CA CA EU 7, EU CA CA EU 7, EU CA CA EU 8, EU CA CA EU 8, EU CA CA EU 9, EU CA CA EU 9, EU CA CA EU 8, EU CA CA EU 9, EU CA CA EU 9, EU CA CA EU 10, EU CA CA EU 10, EU CA CA EU 10, EU CA CA EU 11, EU CA CA EU 11, EU CA CA EU 12, EU CA CA EU 12, EU CA CA EU 11, EU CA CA EU 12, EU CA CA EU 12, EU CA CA EU 13, EU CA CA EU 13,542 Beam weights calculated without top rigging *Spans in 1 foot increments. Part ef: AVAILABLE Description FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 170t WLL at 64 ft. span. See Load Table for WLL at spans greater than 64 ft. Base sling angle, α, 45 degrees or greater. End Units & Drop Links are rated at 85t (170t combined capacity). Bolt tightening torque: 184 pound-foot (M24); 110 pound-foot (M20) / Item lbs. P1 End Unit (MOD 110H) 384 P2 Drop Link (MOD 110H) 171 P3 20 ft. Strut 3,049 P4 10 ft. Strut 1,744 P5 5 ft. Strut 1,094 P6 4 ft. Strut 963 P7 3 ft. Strut 832 P8 2 ft. Strut 701 P9 1 ft. Strut 571 P10 Mod 400/110 Cone Adaptor 441 P11 120t Bolt Shackle 243 P12 85t Bolt Shackle 137 P13 Table 1: Component List Mod 400: M24x90 Bolts, Nuts & Washers Mod 110: M20x65 Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to safe use of spreader. Do not rig the lower slings more than 6 degrees from vertical Typical Spreader Assembly α P10 P11 P12 P1 Span P3 P9 P13 P2 250 (800) entals@entlgh.com

65 AVAILABLE Part ef: Description / Item (lbs.) P1 End Unit WLL 125t 1,500 P2 Drop Link WLL 125t 397 P3 20 ft. Strut 3,049 P4 10 ft. Strut 1,744 P5 5 ft. Strut 1,094 P6 4 ft. Strut 963 P7 3 ft. Strut 832 P8 2 ft. Strut 701 P9 1 ft. Strut 571 P10 200t Wide Body Shackle 452 P11 125t Wide Body Shackle 203 P12 FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 250t WLL at 68 ft. span (60 degrees Base Sling Angle). End Units & Drop Links are rated at 125t (250t combined lift). Base sling angle, α, 45 degrees or greater. Table 1: Component List M24x90 Grade 8.8, HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to safe use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Modular Spreader Beams Ton Mod 400/250 Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.) To calculate the WLL at intermediate spans utilising the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU EU 3, EU 2 EU 4, EU 4 EU 4, EU 5 1 EU 5, EU 5 3 EU 5, EU 5 5 EU 5, EU 10 2 EU 6, EU 10 4 EU 6, EU EU 7, EU EU 7, EU EU 7, EU EU 7, EU EU 8, EU EU 8, EU EU 8, EU EU EU 8, EU EU 9, EU EU 9, EU EU 10, EU EU 10, EU EU 10, EU EU 10, EU EU 10, EU EU 11, EU EU 11, EU EU 12, EU EU 12, EU EU 12, EU EU 13, EU EU 13, EU EU 13, EU EU 13, EU EU 13, EU EU 14, EU EU 14, EU EU 14, EU EU 15,264 Beam weights calculated without top rigging. *Spans in 1 foot increments. igging Modular Spreader Beams Typical Spreader Assembly α P10 P11 P1 Span P3 P9 P12 P2 (800) entals@entlgh.com 251

66 Modular Spreader Beams igging Modular Spreader Beams Ton Mod 400/300 Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.) To calculate the WLL at intermediate spans utillising the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU EU 3, EU 2 EU 4, EU 4 EU 4, EU 5 1 EU 5, EU 5 3 EU 5, EU 5 5 EU 6, EU 10 2 EU 6, EU 10 4 EU 6, EU EU 7, EU EU 7, EU EU 7, EU EU 7, EU EU 8, EU EU 8, EU EU 8, EU EU EU 8, EU EU 9, EU EU 9, EU EU 10, EU EU 10, EU EU 10, EU EU 10, EU EU 10, EU EU 11, EU EU 11, EU EU 12, EU EU 12, EU EU 12, EU EU 13, EU EU 13, EU EU 13, EU EU 13, EU EU 13, EU EU 14, EU EU 14, EU EU 14, EU EU 15,330 Beam weights calculated without top rigging. * Spans in 1 foot increments Part ef: AVAILABLE FO Description NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 300t WLL at 62 ft. span (60 degrees Base Slinge Angle). End Units & Drop Links are rated at 150t (300t combined lift). Base sling angle, α, 45 degrees or greater. Table 1: Component List / Item lbs. P1 End Unit WLL 150t 1,500 P2 Drop Link WLL 150t 397 P3 20 ft. Strut 3,049 P4 10 ft. Strut 1,744 P5 5 ft. Strut 1,094 P6 4 ft. Strut 963 P7 3 ft. Strut 832 P8 2 ft. Strut 701 P9 1 ft. Strut 571 P10 200t Widebody Shackle 452 P11 150t Shackle 309 P12 M 24x90 Grade 8.8, HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Typical Spreader Assembly α P10 P11 P1 Span P3 P9 P12 P2 252 (800) entals@entlgh.com

67 AVAILABLE Part ef: Description / Item lbs. P1 End Unit (300 metric tons) 1,261 P2 Drop Link (300 metric tons) 331 P3 20 ft. Strut 3,049 P4 10 ft. Strut 1,744 P5 5 ft. Strut 1,094 P6 4 ft. Strut 963 P7 3 ft. Strut 832 P8 2 ft. Strut 701 P9 1 ft. Strut 571 P10 400t Widebody Shackle 1,279 P11 300t Widebody Shackle 794 P12 FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 600t WLL at 40 ft. span (60 degrees Base Slinge Angle). End Units & Drop Links are rated at 300t (600t combined lift). Base sling angle, α, 45 degrees or greater. Table 1: Component List M24x90 Grade 8.8 HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Typical Spreader Assembly Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Modular Spreader Beams Ton Mod 400/600 Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.) Beam (lbs.) EU EU 6, EU 2 EU 7, EU 4 EU 7, EU 5 1 EU 8, EU 5 3 EU 8, EU 5 5 EU 9, EU 10 2 EU 9, EU 10 4 EU 9, EU EU 10, EU EU 10, EU EU 10, EU EU 11, EU EU 11, EU EU 11, EU EU 11, EU EU EU 11, EU EU 12, EU EU 12, EU EU 13, EU EU 13, EU EU 13, EU EU 14, EU EU 14, EU EU 14, EU EU 15, EU EU 15, EU EU 15, EU EU 15, EU EU 16, EU EU 16, EU EU 16, EU EU 16, EU EU 17, EU EU 17, EU EU 18, EU EU 17, EU EU 18,504 Beam weights calculated without top rigging. * Spans in 1 foot increments igging Modular Spreader Beams α P10 P11 P1 Span P3 P9 P12 P2 (800) entals@entlgh.com 253

68 Modular Spreader Beams igging Modular Spreader Beams Ton Mod 400/700 Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.) To calculate the WLL at intermediate spans utilising the 1 ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU EU 7, EU 2 EU 8, EU 4 EU 8, EU 5 1 EU 9, EU 5 3 EU 9, EU 5 5 EU 9, EU 10 2 EU 10, EU 10 4 EU 10, EU EU 11, EU EU 11, EU EU 11, EU EU 11, EU EU 12, EU EU 12, EU EU 12, EU EU EU 12, EU EU 13, EU EU 13, EU EU 14, EU EU 14, EU EU 14, EU EU 14, EU EU 14, EU EU 15, EU EU 15, EU EU 15, EU EU 16, EU EU 16, EU EU 17, EU EU 17, EU EU 17, EU EU 17, EU EU 17, EU EU 18, EU EU 18, EU EU 18, EU EU 19,213 Beam weights calculated without top rigging. * Spans in 1 foot increments Part ef: AVAILABLE FO Description NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. ated at 700t WLL at 28 ft. span (60 degrees Base Slinge Angle). End Units & Drop Links are rated at 350t (700t combined lift). Base sling angle, α, 45 degrees or greater. Table 1: Component List / Item lbs. P1 End Unit (WLL 350t) 1,500 P2 Drop Link (WLL 350t) 397 P3 20 ft. Strut 3,049 P4 10 ft. Strut 1,744 P5 5 ft. Strut 1,094 P6 4 ft. Strut 963 P7 3 ft. Strut 832 P8 2 ft. Strut 701 P9 1 ft. Strut 571 P10 400t Wide Body Shackle 1279 P11 400t Wide Body Shackle 1279 P12 M24x90 Grade 8.8, HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Typical Spreader Assembly P11 α P1 Span P3 P9 P12 P2 P (800) entals@entlgh.com

69 AVAILABLE FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top WLL Min. top WLL sling metric sling metric length tons length tons (ft in) (tonnes) (ft in) (tonnes) Modular Spreader Beams Ton Mod 1000/250 Table 2: Load v. Span Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.), CA Cone Adaptor (2 ft.) To calculate the WLL at intermediate spans utilising the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU CA CA EU 5, EU CA 5 CA EU 7, EU CA 10 CA EU 8,855 ated at 250t WLL at 100 ft. span (60 degrees Base Sling Angle). End Units & Drop Links are rated at 125t (250t combined lift). Base sling angle, α, 45 degrees or greater. Part ef. Description / Item lbs. P1 End Unit (MOD 400) 1,500 P2 Drop Link (MOD 400) 397 P3 30 ft. Strut 6,558 P4 20 ft. Strut 4,760 P5 10 ft. Strut 2,965 P6 5 ft. Strut 2,072 P7 MOD 1000 Cone Adaptor 1,190 P8 200t Wide Body Shackle 452 P9 125t Wide Body Shackle 203 P10 Table 1: Component List M24 x 90, Grade 8.8, HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Typical Spreader Assembly EU CA 10 5 CA EU 10, EU CA 20 CA EU 10, EU CA 20 5 CA EU 12, EU CA CA EU 13, EU CA 30 5 CA EU 14, EU CA CA EU 15, EU CA CA EU 17, EU CA CA EU 17, EU CA CA EU 19, EU CA CA EU 20, EU CA CA EU 21, EU CA CA EU 21, EU CA CA EU 24, EU CA CA EU 23, EU CA CA EU 25, EU CA CA EU 26,731 Beam weights calculated without top rigging and may vary depending on strut configuration. * Spans in 1 foot increments igging Modular Spreader Beams α P7 P8 P9 P1 Span P3 P6 P10 P2 P8 represents Modular 400 struts used to create beam spans increased in 1 foot increments. Mod 400 struts can be inserted between the Mod 1000 Cone Adaptors and the Mod 400 End Units. However, the following restrictions apply: *At least 50% of the spreader must be Mod 1000 struts. *A maximum of 3 Mod 400 struts can be assembled per side. (800) entals@entlgh.com 255

70 Modular Spreader Beams Ton Mod 1000/300 Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top WLL Min. top WLL sling metric sling metric length tons length tons (ft in) (tonnes) (ft in) (tonnes) Table 2: Load v. Span Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.) To calculate the WLL at intermediate spans utilising the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU CA CA EU 6, EU CA 5 CA EU 8, EU CA 10 CA EU 9,063 AVAILABLE FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. Modular Spreader Beams igging EU CA 10 5 CA EU 12, EU CA 20 CA EU 10, EU CA 20 5 CA EU 12, EU CA CA EU 13, EU CA 30 5 CA EU 14, EU CA CA EU 15, EU CA CA EU 17, EU CA CA EU 17, EU CA CA EU 19, EU CA CA EU 20, EU CA CA EU 21, EU CA CA EU 22, EU CA CA EU 24, EU CA CA EU 23, EU CA CA EU 26, EU CA CA EU 26,939 Beam weights calculated without top rigging and may vary depending on strut configuration. * Spans in 1 foot increments ated at 300t WLL at 100 ft. span (60 degrees Base Sling Angle). End Units & Drop Links are rated at 150t (300t combined lift). Base sling angle, α, 45 degrees or greater. Table 1: Component List Part ef: Description / Item (lbs.) P1 End Unit (MOD 400) 1,500 P2 Drop Link (MOD 400) 397 P3 30 ft. Strut 6,558 P4 20 ft. Strut 4,760 P5 10 ft. Strut 2,965 P6 5 ft. Strut 2,072 P7 MOD 1000 Cone Adaptor 1,190 P8 200t Wide Body Shackle 452 P9 150t Wide Body Shackle 309 P10 M24x90 Grade 8.8 HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Typical Spreader Assembly α P7 P8 P9 P1 Span P3 P6 P10 P2 P8 represents Modular 400 struts used to create beam spans increased in 1 foot increments. Mod 400 struts can be inserted between the Mod 1000 Cone Adaptors and the Mod 400 End Unites. However, the following restrictions apply: *At least 50% of the spreader must be Mod 1000 struts. *A maximum of 3 Mod 400 struts can be assembled per side. 256 (800) entals@entlgh.com

71 AVAILABLE FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Modular Spreader Beams Ton Mod 1000/600 Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.), CA Cone Adaptor (2 ft.) To calculate the WLL at intermediate spans utilising the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU CA CA EU 9, EU CA 5 CA EU 11,364 ated at 600t WLL at 80 ft. span (60 degrees Base Slinge Angle). End Units & Drop Links are rated at 300t (600t combined lift). Base sling angle, α, 45 degrees or greater. Part ef: Description / Item lbs. P1 End Unit (MOD 400) 1,500 P2 Drop Link (MOD 400) 397 P3 30 ft. Strut 6558 P4 20 ft. Strut 4760 P5 10 ft. Strut 2965 P6 5 ft. Strut 2072 P7 MOD 1000 Cone Adaptor 1190 P9 400t Wide Body Shackle 1279 P10 300t Wide Body Shackle 794 P10 Table 1: Component List M24 Bolts, Nuts & Washers Beam weights calculated without top rigging EU CA 10 CA EU 12, EU CA 10 5 CA EU 14, EU CA 20 CA EU 14, EU CA 20 5 CA EU 16, EU CA CA EU 17, EU CA 30 5 CA EU 17, EU CA CA EU 18, EU CA CA EU 20, EU CA CA EU 20, EU CA CA EU 22, EU CA CA EU 23, EU CA CA EU 24, EU CA CA EU 25, EU CA CA EU 27, EU CA CA EU 27,168 igging Modular Spreader Beams Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Typical Spreader Assembly EU CA CA EU 29, EU CA CA EU 30,133 Beam weights calculated without top rigging and may vary depending on strut configuration. * Spans in 1 foot increments α P7 P8 P9 P1 Span P3 P6 P10 P2 P8 represents Modular 400 struts used to create beam spans increased in 1 foot increments. Mod 400 struts can be inserted between the Mod 1000 Cone Adaptors and the Mod 400 End Unites. However, the following restrictions apply: *At least 50% of the spreader must be Mod 1000 struts. *A maximum of 3 Mod 400 struts can be assembled per side. (800) entals@entlgh.com 257

72 Modular Spreader Beams Ton Mod 1000/700 Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Min. top sling length (ft in) Table 2: Load v. Span WLL metric tons (tonnes) Min. top sling length (ft in) ecommended Configuration EU End Unit (3 ft.), CA Cone Adaptor (2 ft.) To calculate the WLL at intermediate spans utilising the 1ft strut, round up the span to the next longest span in Table 2, and use the stated WLL. Beam (lbs.) EU CA CA EU 9, EU CA 5 CA EU 12,028 AVAILABLE FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. Modular Spreader Beams igging EU CA 10 CA EU 12, EU CA 10 5 CA EU 14, EU CA 20 CA EU 14, EU CA 20 5 CA EU 16, EU CA CA EU 17, EU CA 30 5 CA EU 18, EU CA CA EU 19, EU CA CA EU 21, EU CA CA EU 21, EU CA CA EU 23, EU CA CA EU 24, EU CA CA EU 25, EU CA CA EU 26, EU CA CA EU 28, EU CA CA EU 27, EU CA CA EU 29, EU CA CA EU 30,797 Beam weights calculated without top rigging and may vary depending on strut configuration. * Spans in 1 foot increments ated at 700t WLL at 75 ft. span (60 degrees Base Slinge Angle). End Units & Drop Links are rated at 350t (700t combined lift). Base sling angle, α, 45 degrees or greater. Part ef: Table 1: Component List Description / Item (lbs.) P1 End Unit (MOD 400) 1,500 P2 Drop Link (MOD 400) 397 P3 30 ft. Strut 6,558 P4 20 ft. Strut 4,760 P5 10 ft. Strut 2,965 P6 5 ft. Strut 2,072 P7 MOD 1000 Cone Adaptor 1,190 P8 400t Wide Body Shackle 1,279 P9 400t Wide Body Shackle 1,279 P10 M24 x 90, Grade 8.8, HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical. Typical Spreader Assembly α P7 P8 P9 P1 Span P3 P6 P10 P2 P8 represents Modular 400 struts used to create beam spans increased in 1 foot increments. Mod 400 struts can be inserted between the Mod 1000 Cone Adaptors and the Mod 400 End Unites. However, the following restrictions apply: *At least 50% of the spreader must be Mod 1000 struts. *A maximum of 3 Mod 400 struts can be assembled per side. 258 (800) entals@entlgh.com

73 AVAILABLE FO NOTE: Top Slings shall be properly loadrated based on the specified angle used. LGH top sling inventory is based on ental Center location availability. Span (ft) WLL metric tons (tonnes) Base to Sling Angle (BSA) α Min. top sling length (ft in) WLL metric tons (tonnes) Modular Spreader Beams Ton Mod 1000/1200 Table 2: Load V. Span Min. top sling length (ft in) ecommended Configuration EU End Unit (5 ft.) Beam (lbs.) EU EU EU 5 EU ated at 1200t WLL at 65 ft. span. (70 degrees Base Slinge Angle). End Units & Drop Links are rated at 600t (1200t combined lift). Base sling angle, α, 45 degrees or greater. Part ef: Description /Item lbs. P1 End Unit (600 metric tons) 3432 P2 Drop Link (600 metric tons) 1699 P3 30 ft. Strut 6558 P4 20 ft. Strut 4760 P5 10 ft. Strut 2965 P6 5 ft. Strut 2072 P7 P8 700t Wide Body Shackle or 700t Bow Shackle 600t Wide Body Shackle or 600t Bow Shackle P9 85t Shackle 137 P10 Table 1: Component List M24 x 90 Grade 8.8 HT Bolts, Nuts & Washers Beam weights calculated without top rigging. Max number of struts allowed in spreader assembly: 5 Assemble longer struts in the center of the spreader configuration Sling angle is crucial to use of spreader. Do not rig the lower slings more than 6 degrees from vertical EU 10 EU EU 10 5 EU EU 20 EU EU 20 5 EU EU EU EU 30 5 EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU EU Beam weights calculated without top rigging and may vary depending on strut configuration. * Spans in 1 foot increments igging Modular Spreader Beams Typical Spreader Assembly P7 α P2 P9 P1 P3 P6 P10 P8 Span Pictured above is a MOD 1000 with a MOD 24 below for size comparison. The MOD 1000 features a 5 ft. strut with end units and shackles. (800) entals@entlgh.com 259

74 Endcap Spreader Beams 9 80 Ton 4" & 6" End Caps Compression Cap Load Chart 4 MaxiBar Chart 4 MaxiBar End Cap: 200 lbs. Pair 4 MaxiBar Link Plate: 72 lbs. Pair 4 Schedule 160 Pipe: 22.5 lbs. per ft. 4 Pipe Deduction: 1.7 ft. 4 MaxiBar Load Chart Capacity in Tons 2000 lbs. 4 MaxiBar AVAILABLE FO Endcap Spreader Beams igging Span (feet) Min. Top Sling Angle 45 Sch. 160 Min. Top Sling Angle 60 Sch MaxiBar Chart 6 XL End Caps: 600 lbs. Pair 6 XL Link Plates: 120 lbs. Pair 6 Schedule 80 Pipe: 28.6 lbs. per ft. 6 XL Pipe Deduction: 2 ft. 6 MaxiBar Load Chart 6 MaxiBar Span (feet) Min. Top Sling Angle 45 Sch. 80 Capacity in Tons 2000 lbs. Min. Top Sling Angle 60 Sch. 80 Span (feet) Min. Top Sling Angle 45 Sch. 80 Min. Top Sling Angle 60 Sch (800) entals@entlgh.com MAXIBA

75 AVAILABLE 8 MaxiBar FO Endcap Spreader Beams Ton 8", 10" & 12" End Caps Compression Cap Load Chart 8 MaxiBar Chart 8 XL End Caps: 1,000 lbs. Pair 8 XL Link Plates: 245 lbs. Pair 8 Schedule 80 Pipe: lbs. per ft. 8 XL Pipe Deduction: 2.33 ft. 10 MaxiBar Chart 10 XL End Caps: 1,800 lbs. Pair 10 XL Link Plates: 400 lbs. Pair 10 Sch. 120 Pipe: lbs. per ft. 10 XL Pipe Deduction: 2.92 ft. 12 MaxiBar Chart 12 XL End Caps: 3,800 lbs. Pair 12 XL Link Plates: 850 lbs. Pair 12 Sch. 80 Pipe: lbs. per ft. 12 Sch. 120 Pipe: lbs. per ft. 12 XL Pipe Deduction: 4.17 ft. 8 MaxiBar Load Chart 10 MaxiBar Load Chart Span (ft.) Min. Top Sling Angle 45 Sch. 80 Capacity in Tons 2000 lbs. Min. Top Sling Angle 60 Sch. 80 Span (ft.) Min. Top Sling Angle 45 Sch. 80 Min. Top Sling Angle 60 Sch Span (ft.) Min. Top Sling Angle 60 Sch. 80 Span (ft.) Min. Top Sling Angle 60 Sch. 80 Span (ft.) Span (feet) 12 MaxiBar Load Chart Capacity in Tons 2000 lbs. Min. Top Sling Angle 60 Sch. 80 Min. Top Sling Angle 45 Sch. 120 (800) entals@entlgh.com Capacity in Tons 2000 lbs. Min. Top Sling Angle 60 Span (feet) Sch. 120 Min. Top Sling Angle 45 Sch. 120 Min. Top Sling Angle 60 Sch Span (ft.) Min. Top Sling Angle 60 Sch. 120 Span (ft.) Min. Top Sling Angle 60 Sch. 120 Span (ft.) Min. Top Sling Angle 60 Sch MAXIBA igging Endcap Spreader Beams 261

76 Telescopic Spreader Beams 2 15 Ton 32 Adjustable Product Features: This page contains SALE ITEMS ONLY Ideal where headroom is not limited. Adds stability to lift. Telescopic adjustable spread standard. Available with standard chain or wire rope rigging. Available with Adjust-A-Leg rigging for off center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating). Wide range of additional sizes and capacities. Designed and manufactured to ASME standards. Specifications Telescopic Spreader Beams Capacity (tons) / / / / / / / / / / / /20 Spread (ft.) Min Spread (ft.) Max Headroom Min/Max w/chain (ft.) 48/57 72/88 96/ /166 55/64 79/95 102/ /172 60/69 74/ / /163 & Beam Hooks (lbs.) A Oblong Dia. B Oblong Width C Oblong Height F Hook To Beam Bottom O Hook Opening w/ latch 1/ / Chain igging (lbs.) / / / / /72 87/ / / / igging Note: = beam and hooks only (no top rigging). Spreader Beam Shown with option C Option C Chain top rigging from beam to crane hook. Top igging Options Option W Wire rope top rigging from beam to crane hook. Option A Adjust-A-Leg sling top rigging for off-center load adjustment. Consult LGH for Option A Specifications. (not included in Quickship Program). 262 (800) entals@entlgh.com

77 AVAILABLE FO Telescopic Spreader Beams Ton Spreader Lifting Beam AD32000A-1PA Telescopic Spreader, WLL: 25 Tons (50,000 Lbs.) M I N I M U M SL I N G AN G L E TY P PI N AN D L AN Y A D A AN G E M E N T FO 6" AD J U STM E N T F O M 276" TO 4 80 " Proof-tested and certified to 125% (62,500 Lbs.) Designed and manufactured to meet or exceed ASME B30.20 Calculated weight: 1,825 Lbs M AX I M U M E X TE N SI O N TY P AD19000A-1PA Telescopic Spreader, WLL: 30 Tons (60,000 Lbs.) Proof-tested and certified to 125% (75,000 Lbs.) Standard specification #EAD21000A applies. Designed and manufactured to meet or exceed ASME B30.20 and BTH-1, design category B, service class 0. Calculated weight: 560 Lbs. AD12000A-1PA Telescopic Spreader, WLL: 75 Tons (150,000 Lbs.) Proof-tested to 125% (187,500 Lbs.) and certified (per OSHA 2232) Standard specification #EAD21000A applies. Designed and manufactured to meet or exceed ASME B30.20 and BTH-1, design category B, service class 0. Calculated weight: 1,650 Lbs. Specifications Telescopic Spreader Beams igging Capacity (ton) (lbs.) Min Length Capacity Max Length Capacity AD32000A-1PA ' 40' AA19000A-OS-1PA ' 18' AA12000A-OS-1PA ' 24' (800) entals@entlgh.com 263

78 Telescopic Spreader Beams Ton Spreader Lifting Beam 32S-45-23/40 AVAILABLE FO LUG SIZED FO 35 METIC TON BTAS LUG SIZED FO 25 METIC TON BTAS 23'0" Telescopic Spreader Beams 45 MINIMUM IGGING ANGLE LUG SIZED FO 35 METIC TON BTAS S-50-15/ '0" '0" MINIMUM IGGING ANGLE TYP 3.00 igging LUG SIZED FO 25 METIC TON BTAS '0" MINIMUM IGGING ANGLE MINIMUM IGGING ANGLE TYP '0" '0" Capacity (ton) Specifications (lbs.) Min Length Capacity Max Length Capacity 32S / S / (800)

79 AVAILABLE FO Lifting Beams 20 Ton/40 Ton Low Headroom Lifting Beam A-20Tx16-1 Specifications 11 1/8" Capacity (ton) 11 1/8" Width Max Spread Net (lbs.) A-20Tx /2" A-20Tx A-20Tx20-1 5" 1 1/2" 20'-11" OVEALL LENGTH 20'-11" OVEALL LENGTH 3'-1 1/8" 2 1/2" 6" SPACING BETWEEN HOLES 1 1/2" HOLES FO 12 TON SHACKLE 9" 2'-8 1/8" 2 1/8" HOLE FO 25 TON SHACKLE 3'-1 1/8" 2 1/2" Lifting Beams 6" SPACING BETWEEN 20'-0" MAX. HOLE SPACING 3'-0" MIN. HOLE SPACING 20'-0" MAX. HOLE SPACIN Ton Low Headroom Lifting Beam igging (800) entals@entlgh.com 265

80 Lifting Beams 1/2 40 Ton 20 Low Headroom AVAILABLE FO Low Headroom Multiple Spread Lifting Beam Lifting Beams igging Product Features: Beams over 4 have 3 spreads 3 & 4 beams have 2 spreads. Swivel hooks with hook latches standard. Wide range of sizes and capacities. Designed and manufactured to ASME standards. Standard Feature Three spreads to adjust to the load: Outside spread Middle spread (outside less 1 ) Inside spread (outside less 2 ) Capacity (tons) 1/ Headroom (lbs.) Headroom (lbs.) Headroom (lbs.) Headroom (lbs.) Headroom (lbs.) Headroom (lbs.) Outside Spread in Feet / / / / / /2 115 Specifications 20 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / /2 Headroom (lbs.) / / / / / / / / / / / / Headroom (lbs.) / / / / / / Headroom (lbs.) / / / / / /4 1, Headroom (lbs.) / / / / /2 1, /2 1, Headroom (lbs.) / / / /8 1, /8 1, Headroom (lbs.) / / /4 1, Headroom (lbs.) / / (800) entals@entlgh.com

81 AVAILABLE FO Lifting Beams 1/2 40 Ton 20 Low Headroom ecommended Faspins (Option B) if frequent hook position changes (spread) are required. H Option A Extra Holes or Different Placement of Holes Allows multiple hook positioning beyond standard 3 spreads. Specify number and spread(s) required. Specifications (Continued) Outside Spread in Feet / / / / / / / / / / / /4 1, / / / / /2 1, /4 1, / / / / /2 1, /4 1, / / /4 1, /4 1, /2 1, /4 2, / /4 1,340 Other Dimensions A=7/8 T=3/4 B=3 O=7/8 C=5 A=7/8 T=3/4 B=3 O=7/8 C=5 A=7/8 T=34 B=3 O=7/8 C=5 A=1 1 /4 T=1 B=3 O=1 C=5 A=2 T=1 1 /4 B=4 O=1 15 /16 C=7 Option B Faspins For ease of positioning hooks with quick release. Specify number of faspins required. igging Lifting Beams / /4 1, /4 1, / /4 1, , / , ,670 A=2 T=1 1 /4 B=4 O=1 1 /2 C=7 A=2 T=1 1 /4 B=5 O=1 9 /16 C=7 Option C Extra Hooks Allows for multiple pick points. Specify number of hooks required /4 1,385 A=2 1 /2 T=1 1 /2 B=5 O=2 1 /16 C=9 A=2 1 /2 T=1 1 /2 B=5 O=2 1 /4 C=9 A=3 T=1 3 /4 B=6 O=2 1 /4 C=12 Capacities Available to 300 Ton A=3 1 /2 T=2 B=7 O=2 1 /4 C=16 A=3 1 /2 T=2 1 /2 B=7 O=3 C=16 Option D Pin Type Bail Lifting pin located between structural channel. (Hoist hook information must be supplied.) (800) entals@entlgh.com 267

82 Lifting Beams 4 12 Ton 16 & AB Low Headroom AVAILABLE FO Specifications No. ated Capacity (Ton) Spread Bail Bolt Type Anchor Shackle (tons) Adjustment Headroom Max Min Top Bottom (lbs.) /4 4 3 / S /4 4 3 / Specifications Lifting Beams igging AB-5110 AB-5110 Specifications Specifications No. ated Capacity Spread Bolt Type Anchor Shackle (tons) Bail Adjustment Headroom Max Min Top Bottom (lbs.) AB NA /2 NA (800) entals@entlgh.com

83 AVAILABLE FO Pallet Lifter 2 3 Ton 90 Fixed Forks igging Pallet Lifter No. Capacity (tons) Specifications Dimensions (in) Forks Bail W E L M N A B C J* H (lbs) / /2 2 1 / /2 6 1 / /2 823 *ecommended is an additional 3-4 clearance above the load for ease of loading and unloading the lifter. (800) entals@entlgh.com 269

84 Tri-Link 55 Ton Type T1 AVAILABLE FO Tri-Link igging Dimensions Capacity (Tons) A B C X Y (Lbs.) / /4 8 1 /4 4 1 / / / (800) entals@entlgh.com

85 AVAILABLE FO Tri-Link 55 & 175 Ton 55 Ton O 2-1/2 TYP.3 PL. CL / /16 60 XXXXX XXXXX XXXXX STAMP PAT NO. AND C /2 Tri-Link 175 Ton up 1-11 igging 2-2 SCALE: 3 Specifications Shackles Width (Center to Center) (Lbs.) up 55 Ton Tri-Link with Shackles (3) 55 Ton Alloy Bolt Type Shackles Ton Tri-Link with Shackles (2) 85 Ton Alloy Bolt Type Shackles (1) 200 Ton Alloy Bolt Type Shackle 26 1,058 (800) entals@entlgh.com 271

86 Collector ing 150 Ton 16 Point Crown VA AV A AVAILABLE FO Designed To Accept Crosby G /2" 85t Bolt Type Alloy Shackles Collector ing Designed To Accept Crosby G " 150t Bolt Type Shackle Designed To Accept Crosby G /4" 12t Screw Pin Shackles igging Notes: - Capacity: 150 Tons - Approx. : 2,200 lbs - All Structural Steel (shapes and plates) shall conform to the following specifications: - Wide Flange and W/T shapes: ASTM A992 - Channels, Angles W/T's and Plates: A36, A572 G 50 - Hollow Structural Sections (HSS): ASTM A500, Grade B (Yeild Stress = 46 KSI) - Pipe (Seamless or Electric Fusion Welded): ASTM A53, Grade B - Detailing fabrication and erection of structural steel shall conform to the AISC steel construction manual, latest edition. - All weldmetal shall have a minimum tensile strength of 70 KSI. 272 (800) entals@entlgh.com

87 igging Digital Load Link 2,200 lbs. 660,000 lbs. Master Link 7,400 lbs. 800,000 lbs OV Shank Hook 80 Ton Shackles Ton Turnbuckles ,000 lbs. Modular Spreader Beams 6 1,200 Ton Need Additional igging Equipment? Please contact LGH today! or entals@entlgh.com Endcap Spreader Beam Ton Telescopic Spreader Beam 2 50 Ton Lifting Beam 1/2 40 Ton Pallet Lifter 2 3 Ton Tri-Link 55 & 175 Ton Collector ing 150 Ton (800) entals@entlgh.com 273