MATERIAL HANDLING L-90 Series Hand Chain Hoists. Chain Hoists

Transcription

1 Manufacturers & Vendors Campbell Coffing Hamilton Indusco JET Louisville Lug-All Martin Wheel Samson Cordage Trico Lawrence MATERIAL HANDLING Chain Hoists...85 Cable Hoists Trolleys Snatch Blocks Farm Jacks...87 Bottle Jacks Pallet Trucks Casters and Wheels...89 Wire Rope Chain and Connectors...92 Chain Hoists L-90 Series Hand Chain Hoists Full range capacity 1/2 to 60 tons Heat treated and hardened grade 80 load chain 29 standard models from 10 to 30 lifts with 7 models in stock Standard hand chain drop equals lift length Compact and portable for ease of positioning material Proof tested with test certificate Engineered for commercial and industrial lifting applications Triple-spur gears for high efficiency All steel construction with a durable powder coat finish Smooth rolled edge on hand chain cover Lightweight, compact design for low headroom applications Completely enclosed brake system Tons Model Capacity (lbs.) Standard Lift (Ft.) Headroom (in.) Number of Falls Load Chain (dia./mm) Req. Hand Chain to Lift Load 1 Pounds Pull to Lift Capacity 1/ / K0250 1/ / K0253 1/ / / / / K / / / / / K / / / / / / / K / / / / K / / / , / K , / , / , / , /2 30-1/ , / , /

2 Cable Hoists Cable Ratchet Lever Hoists Small Frame Cable Ratchet Lever Hoists Small frame cable pullers (or cable ratchet lever hoists) from LUG-ALL offer a lightweight portable design with self storing cables, weighing only 7-9 pounds with ½ ton to 1-½ ton capacities. There are over nine models of LUG-ALL small frame cable pullers available with a variety of options. Capacities- rated loads of 750 pounds to1500 pounds single line; 1500 pounds to 3000 pounds double line Cable lengths- small frame cable lengths on a cable puller range from 10 feet to 25 feet depending on the puller capacity Open Frame Design- allow for daily inspection and cleaning of your cable puller comealong 360 Swivel Hooks- drop forged steel hooks with latches are standard on LUG-ALL cable pullers / cable ratchet lever hoists Swaged Ball Shank Terminal- locks the cable on the drum of the cable puller comealong and allows for full cable extension Reversible Handle- will bend at average of 20-50% overload, warning operator to back off of the load before serious injury or damage to the operator or hoist Double Locking Pawl System- allows for no load brakes to slip or fowl on the LUG-ALL hoist. Positive load holding in all environments Capacity Model Double Line Capacity Handle Pull Full Loads Lifting Distance Single Line Capacity Min. Hook Distance Handle Pull Full Loads Lifting Distance Min. Hook Distance Cable Diameter 1/2 ton lbs. 15 Ft. 16 3/16 16 Ft. 7 lbs. K0500 1/2 ton 115-R lbs. 15 Ft. 16 3/16 16 Ft. 7 lbs. - 3/4 ton lbs. 12-1/2 Ft lbs. 25 Ft. 16 5/32 26 Ft. 8-1/2 lbs. K0505 3/4 ton 125-R 67 lbs. 12-1/2 Ft lbs. 25 Ft. 16 5/32 26 Ft. 8-1/2 lbs /8 ton lbs. 7-1/2 Ft lbs. 15 Ft. 16 3/16 16 Ft. 8-3/4 lbs. K /8 ton 215-R 86 lbs. 7-1/2 Ft lbs. 15 Ft. 16 3/16 16 Ft. 8-3/4 lbs /8 ton lbs. 10 Ft lbs. 20 Ft. 16 3/16 21 Ft. 9-1/4 lbs. K /2 ton lbs. 5 Ft lbs. 10 Ft. 16 7/32 11 Ft. 6 in. 9 lbs. K /2 ton 310-R 100 lbs. 5 Ft lbs. 10 Ft. 16 7/32 11 Ft. 6 in. 9 lbs. - Cable Length Total Weight Medium-Large Frame Cable Ratchet Lever Hoists The medium large frame cable come-along (or cable ratchet lever hoist), model from LUG-ALL offers a versatile portable design for heavier applications. The 3-ton LUG-ALL cable come-along is available with a variety of options. Capacities pounds single line; 6000 pounds double line Cable length- medium large LUG-ALL come-alongs have an 18-foot, with 15-foot usable cable Reversible Telescoping Handle- The model cable come-alongs have a reversible telescoping handle. This feature provides much greater leverage for bigger loads. The telescoping handle feature permits pulling from a standing position and can extend from 37 ½ to 57 in seconds. 2-Postion Handle Socket- adjusts for additional leverage. Lifting and pulling, most lowering or backing-off operations can be accomplished with the socket in the standard position. For additional leverage when lowering or backing-off a load, the handle socket can be changed to the second position to suit the operator s working position. Easily Replaceable Shear Pin-Model cable ratchet lever puller breaks with audible noise to warn of overload before serious injury or damage can occur. Come-along remains operational so load can be reduced before handle bends. Single Line Capacity Capacity Model Lifting Distance Min. Hook Dist. Cable Diameter Cable Length Total Weight 3 ton Ft. 26-1/2 5/16 18 Ft. 34 lbs. K Double Line Capacity Capacity Model Handle Pull Full Loads Lifting Distance Min. Hook Dist. Cable Diameter Cable Length Total Weight 3 ton lbs. 7-1/2 Ft. 34 5/16 18 Ft. 34 lbs. Medium Frame Cable Ratchet Lever Hoists A medium frame cable ratchet lever hoist from LUG-ALL offers longer self-storing cables for when longer reach is needed. It has a lightweight portable design weighing only 13 ¾-15 ½ pounds with capacities ranging from 1-½ to 2 tons. There are six models of our medium frame cable ratchet lever hoist (comealong) available with a variety of options. Capacities- rated loads of 1125, 1500, 2000, 3000 pounds single line; 1500, 2250, 3000, 4000 pounds double line Cable lengths- range from 22 feet to 39 ½ feet depending on the puller capacity Double Line Capacity Single Line Capacity Handle Pull Lifting Min. Hook Handle Pull Lifting Min. Hook Capacity Model Cable Diameter Cable Length Total Weight Full Loads Distance Distance Full Loads Distance Distance 1-1/8 ton lbs. 19 Ft. 23-1/2 83 lbs. 38 Ft. 18 3/16 39 Ft. 6 in. 13-3/4 lbs /8 ton 238-R 100 lbs. 19 Ft. 23-1/2 83 lbs. 38 Ft. 18 3/16 39 Ft. 6 in. 13-3/4 lbs /2 ton lbs. 15 Ft. 23-1/2 97 lbs. 30 Ft. 18 7/32 31 Ft. 6 in. 13-3/4 lbs. K /2 ton 330-R 100 lbs. 15 Ft. 23-1/2 97 lbs. 30 Ft. 18 7/32 31 Ft. 6 in. 13-3/4 lbs. - 2 ton lbs. 10 Ft. 26-1/2 110 lbs. 20 Ft. 18-1/2 1/4 22 Ft. 15-1/2 lbs. K ton 420-R 115 lbs. 10 Ft. 26-1/2 110 lbs. 20 Ft. 18-1/2 1/4 22 Ft. 15-1/2 lbs. -

3 Trolleys PT Series Industrial-Duty Plain Trolleys by JET Low maintenance and trouble-free operation through a wide range of beams Proof tested with test certificate For use with wide-flange H-beams, standard I-beams, or curved track 1/2-ton to 10-ton capacities Multiple spacer washers make beam flange width adjustment quick and easy Rugged steel side plates Hardened wheels with lubricated for life, double sealed ball bearings OSHA, ANSI/ASME B30.11 and B30.17 Capacity Beam Flange Width Beam Height Min. Radius Curve Model 1/2 ton 2-1/2-8 4 Ft Ft K ton K /2 ton 3-1/ K ton 3-1/ K ton K ton 4-5/8 = K ton 4-3/ Snatch Blocks Snatch Blocks by JET For light service use Cast iron single or double sheave Drop forged hook with safety latch Bronze bushings Capacity Wire Rope Dia. Model 3 Single 1/2 ton 5/ F Single 3/4 ton 3/ F Single 1-1/2 ton 1/ F Single 2-1/2 ton 5/ F Single 4 ton 3/ F Double 1/2 ton 5/ F Double 3/4 ton 3/ Double 1-1/2 ton 1/ Double 2-1/2 ton 5/ Double 4 ton 3/ K0257 Farm Jacks Farm Jack by JET Multi-purpose jack to lift, push, pull or clamp Rugged Steel construction throughout Automatic step-by-step operation for raising and lowering load Large cast iron base for stability Adjustable cast steel top clamp clevis for clamping operations Safety sheer pin protects lifting saddle,dropping of load if jack is overloaded Cast steel large and small runners Reversible upright steel bar for long life Bar holes will accomodate chains, cables, etc. Quick disengage with no load Working parts exposed for easy cleaning and lubrication Rust resistant powder coat finish on handle Lifting Cap. at 1 Winching/Pulling Cap. Clamping Cap. Min. Height Max. Height Base Handle Model 7000 lbs lbs. 750 lbs. 4-1/2 43-3/8 7 x K

4 Bottle Jacks JHJ Series Heavy-Duty Industrial Bottle Jacks by JET For lifting, pushing, spreading, bending, pressing or straightening requirements Low profile truck or standard models All models work in upright, angle or horizontal positions Not affected by temperature extremes Electrically welded base and cylinders to assure strength and eliminate leaks Pump handle included Carrying handles on 12-1/2- to 100-ton models ANSI/ASME B30.1 and PALD-1 Note: When used at an angle or in the horizontal position, the pump must be in upright position and piston movement is reduced. Capacity Min. Height Piston Height Head Screw Max. Height Base LxW Model 2 ton 7-1/8 4-1/ /8 4-1/2 x 2-1/ K ton 7-1/2 4-1/2 2-3/8 14-3/8 4-9/16 x 2-13/ K ton 7-7/8 4-5/8 2-3/4 15-1/2 5-5/8 x 3-1/ K ton 7-7/8 4-5/8 2-3/4 15-1/2 6 x 3-1/ K /2 ton 9-1/2 5-7/8 3-1/8 18-1/2 6-1/2 x 4-1/ K /2 ton 6-3/4 3-3/ /8 6-1/2 x 4-1/ K /2 ton 10-3/8 6-1/2 3-1/ /8 x 4-5/ K /2 ton 6-3/4 3-1/2 2-3/ /8 x 4-5/ K /2 ton 10-5/8 6-1/4-16-7/8 7-1/8 x 5-1/ K /2 ton 7-1/8 3-3/8 1-1/ /4 x 5-1/ K - 35 ton /4-17-1/4 8-3/8 x 5-1/ K - 60 ton /4-8-5/8 9-1/4 x 7-3/ K ton / / /32 x 10-7/ K - Pallet Trucks J Series Pallet Trucks by JET 5000 pound capacity High quality welded steel construction with a durable powder coat finish 2-1/2 low profile design for small size pallet openings Single hand operation, fingertip controls, 180 turning radius Extra wide poly-over-steel steer wheels provide a smooth, quiet ride with added traction and stability Wheel bearings are double sealed and lifetime lubricated W1 W2 L1 L2 H1 H2 A B C Model /4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/ / /4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/ / /4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/ / /4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/ /4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/ /4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/ /4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/ K

5 Casters & Wheels Whirlaway Casters - Series WW - Capacity up to 550 Lbs. by Hamilton Casters The Whirlaway Series is the cold forged companion to the MS, GS, and 52 Series, but scaled down for 1-1/2 wide wheels. The two separate coined and case hardened raceways, joined by a heat treated rivet kingpin, make Whirlaway Swivel Casters top performers and sellers in the lb. duty class. Rugged 1/4 thick mounting plates are ideal for distortion-free welding to all types of mobile equipment, or boltt hem on through slotted holes that fit two popular template patterns. All Series WW casters sport bright zinc plated finish. Optional Accessories: Wheel Brakes (-FB) Wheel Bearing Seals Sealed Swivel Assembly Delrin Bearings (most wheels) Thread guards (most models) Leader Casters - Series Capacity up to 375 Lbs. by Hamilton Casters These are the price leaders of Hamilton Caster s entire product line. Quality features like bright zinc plated finish and hardware, with bolt and nut axles used exclusively. Used on dollies, laundry trucks, food containers and other light duty equipment. Optional Accessories: wheel brake (-B) and thread guards on many 4 models. 89

6 Casters & Wheels General Service Casters - Series GS - Capacity up to 900 Lbs. by Hamilton Casters Series GS is constructed from swivel parts -cold forged- under a 1,000 ton press, a process that rearranges the molecular structure of the steel to provide greater density at points of stress. Mirror-smooth double ball raceways are the result of coining under extreme pressure, and then hardening for long life. Zinc plated finish is standard on all GS swivel and rigid rigs. Improvements to the GS Series include the addition of the Poly-Soft wheel type (a high performing 82A durometer polyurethane on cast iron), precision ball bearings now standard in Duralast, Unilast, & new Poly-Soft wheels, and a new tread contact brake (-ZB). Optional Accessories: Wheel Brakes -- (-CB [on 4 models and larger], -FB, -ZB [on 5 models and larger], -FRB [except 3-1/2 models], -B); Wheel Bearing Seals; Sealed Swivel Assembly; Thread Guards. 90

7 Wire Rope 6 X 19 IPS Wire Rope with Independent Wire Rope Core IWRC Ropes of the 16 X 19 Classification are used in a greater variety of applications than are all the other constructions of wire rope combined. They are used on cranes, derricks, dredges, draglines, power shovels, scrapers; in mines, quarries, oil fields; and in practically all industries. Rope Diameter Breaking Strength in Tons of 2,000 lbs Improved Plow Steel Approximate Weight per Foot in lbs. 1/ / / / F1090 1/ F1111 9/ F1130 5/ F1142 3/ F1155 7/ F / X 7 Non-Rotating Wire Rope Rope Diameter Breaking Strength in Tons of 2,000 lbs Improved Plow Steel Approximate Weight per Foot in lbs. 1-1/ / / / / / / / / / Strands, 7 Wires per strand. Improved Plow Steel - Steel Core. The 19 X 7 non-rotating wire rope has been developed for services where a minimum rotation or spinning of the rope is highly desirable. It is particularly applicable for the lifting or lowering of free loads with a single-part line. Rope Diameter Circumference (approximate) Weight per ft. (approximate) Breaking Strength in tons of 2,000 lb 1/4 3/ / /8 1-1/ F1080 7/16 1-3/ F1100 1/2 1-5/ F1123 9/16 1-3/ / F1150 Rope Diameter Circumference (approximate) Weight per ft. (approximate) Breaking Strength in tons of 2,000 lb 3/4 2-3/ /8 2-3/ / /8 3-1/ /4 3-7/ /8 4-3/ ,3-1-1/2 4-3/ Preformed Galvanized Aircraft and Stainless Steel Cable Preformed Galvanized Aircraft Cable is recommended whenever high strength, resistance to fatigue, and minimum stretch is required. Individual wires are fully preformed. Manufactured to U.S. Military specifications, Galvanized Aircraft Cable is one of the most widely used small diameter cables. If you require high corrosion-resistance, specify Stainless Steel Cable. Nothing can beat stainless steel for high-strength, long-lasting cable on a boat - especially around salt water. For standing rigging, halyards, topping lifts, life lines and centerboard pendants preformed stainless steel has no peer. All diameters have excellent preforming. Diameter Breaking Strength in lbs. Weight in lbs. Construction per M Ft. Galvanized Stainless Galvanized Stainless 3/32 1 x 19 1,200 1, /32 7 x /32 7 x 19 1,050 1, /8 1 x 19 2,100 2, /8 7 x 7 1,700 1, /8 7 x 19 2,800 2, F1002 F1032 5/32 1 x 19 3,300 3, /32 7 x , /32 7 x 19 2,800 2, /16 1 x 19 4,700 4, /16 7 x 7 3,700 3, /16 7 x 19 4,200 3, F1015 F1033 7/32 1 x 19 6,300 6, /32 7 x 7 4,800 5, /32 7 x 19 5,600 5, Diameter Breaking Strength in lbs. Weight in lbs. Construction per M Ft. Galvanized Stainless Galvanized Stainless 1/4 1 x 19 8,200 8, /4 7 x 7 6,100 6, /4 7 x 19 7,000 6, F1023 F1034 9/32 1 x 19 9,900 9, /32 7 x 7 7,400 7, /32 7 x 19 8,000 7, /16 1 x 19 12,500 12, /16 7 x 7 9,200 9, /16 7 x 19 9,800 9, F1026 F1035 3/8 1 x 19 18,000 17, /8 7 x 7 13,300 12, /8 7 x 19 14,400 12, F1030 F1036 7/16 6 x 19 IWRC 17,600 16, /2 6 x 19 IWRC 22,800 22,

8 Chain & Connectors Proof Coil Chain Proof Coil Chain is often referred to as Common Coil Chain. All sizes electrically welded. Breaking strength is 3.5 times the working load limit. Proof Coil Chain is suitable for ordinary purposes such as for log chains, guard rail chains, cargo or deck lashings and towing chains, also used for certain implement, equipment, and machinery parts. Trade Material Lbs per 100 Working Load feet Limit Galvanized Self-Color Plated 3/16 7/ lbs. F1301 F1300 F1303 1/4 9/ F1305 F1307 5/16 11/ F1310 F1312 3/8 13/ F1315 F1317 1/2 17/ F1320 F1322 Trade Material Lbs per 100 Working Load feet Limit Galvanized Self-Color Plated 5/8 21/ F /4 25/ /8 29/ / High Test Chain High Test Steel Chain is made from a selected analysis chain steel, carefully heat treated to give very high tensile strength and resistance to wear. It has more than double the tensile of proof coil chain. It is used in operations where great strength is required such as oil field, heavy logging, mining, and as the standard chain for the steel trucking industry. Trade Material Lbs per 100 feet Working Load Limit Self-Color 1/4 9/ lbs. F1400 5/16 11/ F1405 3/8 13/ F1410 7/16 15/ Trade Material Lbs per 100 feet Working Load Limit Self-Color 1/2 17/ F1420 5/8 21/ /4 25/ F1430 Alloy Steel Chain Alloy Steel Chain is a high-strength, low-weight chain, manufactured from a special analysis alloy steel. All sizes are side-welded. Tensile strength of material after heat treatment more than 150,000 lbs. sq. in. Average Brinell hardned 300. Minimim elongation at break test 15 percent. For uses wherever the highest strength and best quality are needed. Self Colored finish is standard. Trade Material Lbs per 100 feet Working Load Limit Self-Color 1/4 9/ lbs. F1285 5/16 F1290 3/8 13/ F1295 1/2 17/ Trade Material Lbs per 100 feet Working Load Limit Self-Color 5/8 21/ /4 25/ /8 7/ Replacement Links Forged Steel. Heat Treated. Simple, fool-proof and easy to install. Integral rivets join the two halves while matched lugs distribute the load. Less expensive and stronger than welding. Safer than cold shuts or cast links. For use with proof coil and BBB chain. Dimensions Inside Dimensions Safe Working Load 3/16* 1-3/16 x 25/32 11/16 x 11/ lbs. F1601 1/4* 1-1/2 x 1 7/8 x 7/ /16* 1-11/16 x 1-5/32 15/16 x 15/ /8 2-1/16 x 1-3/8 1-1/8 x 9/ / /16 x 1-17/32 1-9/32 x 19/ /2 2-21/32 x 1-23/ /32 x 21/ /16 3 x 1-15/16 1-5/8 x 3/ /8 3-5/16 x 2-3/ /16 x 25/ /4 3-7/8 x 2-1/2 2-1/8 x 15/ Dimensions Inside Dimensions Safe Working Load 7/8 4-1/2 x 2-15/16 2-1/2 x 1-1/ ** 5 x 3-5/16 2-3/4 x 1-1/ F /8** 5-5/8 x 3-11/16 3-1/8 x 1-3/ /4** 6-1/8 x 4-3/16 3-1/4 x 1-5/ /8** 6-3/4 x 4-9/16 3-1/2 x 1-3/ /2** 7-1/4 x 5 3-3/4 x /8** 8 x 5-7/16 4-1/8 x 2-3/ /8** 9-7/8 x 6-3/8 5-1/4 x 2-5/ * Have rivets only - no interlocking lugs. ** Have reinforced rivet holes. All sizes have rivet holes countersunk.

9 Chain & Connectors Cold Shuts Available for both proof coil and high test chain. Proof coil stock items listed at right. Inside Width Inside Length 3/16 11/32 15/16 F1511 1/4 3/8 1-3/16-5/16 7/16 1-3/8-3/8 5/8 1-1/2-7/16 11/16 1-9/16-1/2 3/4 1-7/8-9/ F1521 Inside Width Inside Length 5/8 13/16 2-3/ /2-7/8 1-1/16 3-1/ /4 3-1/8-1-1/8 1-3/4 4-5/8-1-1/ /8 - Quick Link Connectors No tools required, connectors tighten with fingers only. High quality steel. Can be used indefinitely. Available in standard galvanized and stainless steel. A B C D 1/8 1-3/8 1-1/8 3/8 1/8 F1615 3/16 2-1/4 1-7/16 9/16 5/16-1/4 2-1/4 1-3/4 9/16 5/16 F1614 5/ /16 2-5/16 11/16 7/16 F1750 3/8 3-1/8 2-1/2 3/4 7/16 F1613 1/2 4-1/8 3-1/8 15/16 9/16-9/16 4-3/4 3-5/8 1-1/16 1=5/8-5/8 5-1/2 4-1/4 1-3/16 1-3/4 - Clevis Grab Hooks Clevis Slip Hooks of Chain Safe Working Load 1/4 2,600 F0201 5/16 3,900-3/8 5,400-7/16 7,200-1/2 9,200-5/8 12,750-3/4 18,500 F0207 H-330 Forged Carbon Steel, Quenched and Tempered. Safe Working Load of Chain Slip Hook Sling Hook 1/4 1,950 2,400 F0301 5/16 2,875 3,250-3/8 4,000 4,250-7/16 5,000 6,600-1/2 6,500 8,600 F0304 5/8 9,250 11,250-3/4-16,500 - H-331 Forged Carbon Steel, Quenched and Tempered. Eye Grab Hooks Eye Slip Hooks of Chain Safe Working Load 1/4 2,600 F0402 5/16 3,900-3/8 5,400-7/16 7,200-1/2 9,200-5/8 12,750 F0407 3/4 18,500-7/8 24, ,000 - H-323 Forged Carbon Steel, Quenched and Tempered. of Chain Safe Working Load - Slip Hook Application 1/4 1,950 F0502 5/16 2,875-3/8 4,000-7/16 5,000-1/2 6,500-5/8 9,250-3/4 12,500 F0508 7/8 17, ,700 - H-324 Forged Carbon Steel, Quenched and Tempered. 93

10 Chain & Connectors Standard Wire Rope Thimbles Regular Wire Rope Thimbles are recommended for light duty service where load conditions do not require the extra crushing resistance of heavy wire rope thimbles. Galvanized Steel. Rope Dia. Overall Length Overall Width Inside Length Inside Width Inside Width of Score Max. Pin Diam. 1/8 1-15/16 1-1/16 1-5/16 11/16 5/32 5/8-3/ /16 1-1/16 1-5/16 11/16 7/32 5/8 F0101 1/4 1-15/16 1-1/16 1-5/16 11/16 9/32 5/8-5/16 2-1/8 1-1/4 1-1/2 13/16 3/8 3/4-3/8 2-3/8 1-15/32 1-5/8 15/16 7/16 7/8-1/2 2-3/4 1-3/4 1-7/8 1-1/8 9/16 1-1/16-5/8 3-1/2 2-3/8 2-1/4 1-3/8 11/16 1-1/4-3/4 3-3/4 2-11/16 2-1/2 1-5/8 13/16 1-1/2-7/ /16 3-1/2 1-7/8 15/16 1-3/ /16 3-3/4 4-1/4 2-1/2 1-1/16 2-3/8-1-1/8-1-1/4 6-1/4 4-5/16 4-1/2 2-3/4 1-5/16 2-5/8 F /2 7-1/2 5-3/ /4 1-9/16 3-1/8-1-3/4 10-3/4 7-1/4 7-1/4 4-1/4 1-7/8 4-1/ /4 7-1/4 7-1/4 4-1/4 2-1/8 4-1/8 - Screw Pin Anchor Shackles Safe Working Load - Tons Screw Pin Anchor Shackles are used when the connection must be changed frequently. Galvanized Steel. Inside Length Diameter - Pin Outside of Eye Diameter 3/16 1/3 7/8 1/4 9/16 F0701 1/4 1/2 1-1/8 5/16 11/16 F0702 5/16 3/4 1-7/32 3/8 13/16 F0703 3/ /16 7/16 31/32 F0704 7/16 1-1/2 1-11/16 1/2 1-1/16 F0705 1/ /8 5/8 1-3/16 F0706 5/8 3-1/4 2-3/8 3/4 1-9/16 F0707 3/4 4-3/4 2-13/16 7/8 1-7/8 F0708 7/8 6-1/2 3-5/ /8 F /2 3-3/4 1-1/8 2-3/8 F /8 9-1/2 4-1/4 1-1/4 2-5/8 F / /16 1-3/8 3 F /8 13-1/2 5-3/16 1-1/2 3-5/16 F / /4 1-5/8 3-5/8-1-3/ / /4 2-1/ / /2 2-3/4 6 - Nut Eye Bolts Nut Eye Bolts are drop-forged from special bar quality steel, threaded right hand National Coarse series and assembled with a double chamfered, heavy hex nut.galvanized steel. 1/4 x 4 Regular Nut Eye Bolt - G4536 3/4 x 12 Regular Nut Eye Bolt - G4565 Wire Rope Clips (Cable Clamp) An inexpensive but sturdy clip manufactured with a high grade tough steel and best quality malleable iron base. Each size has an ample margin of strength over the corresponding size of wire rope. USE CLIPS PROPERLY FOR MAXIMUM EFFICIENCY 1. U-Bolt should bear on dead end of rope. 2. Recommended number of clips, depending on safety requirement: Number 1/16 to 3/ /16 to 5/ /4 to /8 to 1-1/ Spacing between clips should be 6 times the rope diameter. 4. Nuts should be re-tightened after initial load. Drop Forged Load Binders - Rope Dia. Galvanized Stainless 1/8 F0001 F0030 3/16 F0002 F0031 1/4 F0003 F0032 5/16 F0004 F0034 3/8 F0005 F0035 7/16 F0017-1/2 F0006-5/8 F0008-3/4 F0009-7/8 F F /8 F /4 F /2 F These drop-forged binders can be used with chain grades 30, 43 and 70. These heavy-duty binders are excellent for hauling steel, lumber, construction equipment, and other large materials. These all-purpose binders feature a forged handle, swivels, and sockets. Heat treated alloy steel hooks and a forged clevis and tongue provide maximum strength. Proof-tested. 3/8 Max Chain Load Binder - F1702 1/2 Max Chain Load Binder - F

11 Chain & Connectors Eye, Jaw, and Hook Turnbuckles Jaw X Jaw Jaw X Eye Hook X Hook Hook X Eye Eye X Eye Black Stub End 1/4 x G G4840 G4902 5/16 x 4-1/2 - - G4735 G4795 G4841 G4905 3/8 x 6 G4618 G4678 G4738 G4798 G4843 G4908 1/2 x 6 C4621 G G4801 G4846-1/2 x 9 G4624 G G /2 x 12 G4627 G4687 G4747 G4807 G4852-5/8 x 6 G4630 G G1810 G4855 G4920 5/8 x 9 G G /8 x 12 G G4756 G4816 G4861 G4927 5/8 x /4 x 6 G4639 G4699 G G4864 G4930 3/4 x G G4867-3/4 x 12 G4645 G4705 G4765 G4825 G4870-3/4 x /8 x /8 x x 6 G G G x 12 G4657 G4717 G G4882 G x x /8 X G4951 Jaw End Swivels Safe Working Load - lbs. Swivel Dimensions in Inches A B C K N P R 1/ /4 11/16 3/4 15/32 7/8 1/4 2-5/8-5/ /8 13/16 1 1/2 7/8 5/ /16-3/ /16 1-1/4 5/8 1-1/16 3/8 3-5/8 F0803 1/ /2 1-5/16 1-1/2 3/4 1-5/16 1/2 4-1/2 F0804 5/ /16 1-3/4 15/16 1-1/2 5/8 5-5/16 F0805 3/ /2 1-3/ /8 1-3/4 3/4 6-1/16-7/ /16 2-1/4 1-3/16 2-1/16 7/ /2 2-5/16 2-1/2 1-3/4 2-13/16 1-1/8 9-9/16-1-1/ /8 2-3/4 1-3/4 2-13/16 1-1/8 8-15/16-1-1/ /8 2-11/16 3-1/8 2-1/ /16 1-3/8 9-7/16-1-1/ / /8 4-7/16 2-1/4 14-3/4 - Hook and Hook Hook and Eye Eye and Eye Jaw and Eye Jaw and Jaw Stub End FIG. 502 Jaw End Swivel. Galvanized Steel. Quenched and Tempered. Ultimate load is five times safe working load. See chart at left. Ratchet Load Binders These turnbuckle-type load binders offer the advantage of a continuous takeup feature and infinite adjustments to secure the load as tightly as possible. The push-pull ratchet action and double-acting, spring-loaded pawl permit easy one-man operation without kickbacks. Pinpoint setting for tension. Permanently locked at all times. Proof Coil Chain Load Binder Economical and durable load binder for up to 1/4 proof coil chain. Easyto-use lever style provides secure attachment for tying down machinery and equipment. Snubnose hooks and forged swivels. Proof Coil Chain Load Binder - F1701 Maximum Chain Handle Length Load Limit G30 G43 G70 F1704 3/8 5/16 1/4 12-3/4 2,650 lbs F1705 1/2 3/8 5/ /4 5,400 lbs 95