LOAD BINDERS QuikBinder PLUS Ratchet...NI27 Ratchet Type...NI27. SHACKLES LONG REACH Bolt, Nut and Cotter...NI35 Screw Pin...NI35

Transcription

1 NEW s ANCHOR SHACKLES Bolt, Nut and Cotter 16 Stainless Steel...NI4 Carbon Steel Bodies...NI Round Pin 16 Stainless Steel...NI4 Carbon Steel Bodies...NI Screw Pin 16 Stainless Steel...NI4 Carbon Steel Bodies...NI Hot-dipped Galvanized...NI CHAIN Grade 0 Proof Coil...NI8 Grade 4 High Test...NI8 Grade 50 Lifting, Stainless Steel...NI0 Grade 70 Transport (Binding)...NI5 Assemblies...NI5 HERC-ALLOY 800 (Grade 80)...NI18 HERC-ALLOY 1000 (Grade 100)...NI18 Industrial, Stainless Steel...NI1 Jack Carbon Steel...NI9 Stainless Steel...NI9 Lock Link...NI9 Passing Link...NI9 Safety Brass Plumbers...NI40 Stainless Steel...NI40 Sash...NI40 Carbon Steel...NI40 Stainless Steel...NI40 Straight Link Coil...NI40 Straight Link Machine...NI41 Twist Link Coil...NI40 Twist Link Machine Carbon Steel...NI41 Stainless Steel...NI41 Twin Loop Carbon Steel...NI41 Stainless Steel...NI41 HOISTS Hand Chain Cyclone...NI4 Hurricane 60...NI4 Series 6...NI4 Lever Operated Bandit...NI4 Puller...NI4 Series 65...NI4 HOIST RINGS Flip-Flop...NI47 Heavy Duty Fractional...NI45 Metric...NI45 Stainless Steel Safety Engineered Fractional...NI46 Metric...NI46 HOOKS Clevlok, Grade 100 Cradle Grab...NI Sling with Latch...NI Direct Connect...NI56 Eye Sling with Latch Grade 80...NI Grade NI HOOKS (Cont.) Grade 4 High Test and Grade 0 Proof Coil Clevis Grab Hook...NI9 Clevis Slip Hook...NI9 Clevis Slip Hook with Latch...NI9 Eye Grab Hook...NI9 Eye Slip Hook...NI9 Eye Slip Hook with Latch...NI9 Grade 70 Transport (Binding) Clevis Grab, Grade 80...NI6 Clevis Slip, Grade 70...NI6 Latchlok, Grade 100 Bushing Swivel Style...NI4 Clevlok Style...NI4 Eye Style...NI4 Stainless Steel Clevis Grab Hooks...NI1 Clevis Slip Hooks with Latch...NI1 S-Hooks, Stainless Steel...NI9 U-Hooks, Stainless Steel...NI9 Weld-On Lifting...NI5 LINKS Anodized Spring...NI8 Connecting Carbon Steel...NI6 Stainless Steel, Cast...NI6 Stainless Steel, Forged...NI6 Coupling, Stainless Steel...NI0 Hammerlok Coupling Grade 80...NI19 Grade NI19 Lap Carbon Steel...NI6 Stainless Steel...NI6 Master Grade 80...NI0 Grade NI0 Stainless Steel...NI0 Quick, Stainless Steel...NI7 Spring Carbon Steel...NI9 Stainless Steel...NI9 LOAD BINDERS QuikBinder PLUS Ratchet...NI7 Ratchet Type...NI7 SHACKLES LONG REACH Bolt, Nut and Cotter...NI5 Screw Pin...NI5 SLINGS Adjust-A-Link, Chain...NI58 Grade 80, Chain Single Oblong Links Both Ends...NI64 Single 1 Leg...NI64 Single Hooks Both Ends...NI65 Double Legs...NI66 Triple Legs...NI67 Quad 4 Legs...NI68 Grade 100, Chain Single Hooks Both Ends...NI59 Single 1 Leg...NI60 Double Legs...NI61 Triple Legs...NI6 Quad 4 Legs...NI6 Permaloc Wire Rope Sliding Choker...NI57 Two Leg Bridle...NI57 SLINGS (Cont.) Permaloc Wire Rope, Eye and Eye...NI56 Roughneck Wire Mesh Triangle and Choker...NI58 Tool Box, Chain, Grade 80...NI44 Tuff-Edge...NI7 Tuff-Edge Web One Ply Flat Eye (Type )...NI48 Two Ply Flat Eye (Type )...NI48 One Ply Endless (Type 5)...NI49 Two Ply Endless (Type 5)...NI49 Tuflex...NI7 Tuflex Roundslings Endless...NI55 Eye and Eye...NI55 Webmaster 100 Polyester Web One Ply Flat Eye (Type )...NI5 Two Ply Flat Eye (Type )...NI5 One Ply Endless (Type 5)...NI54 Two Ply Endless (Type 5)...NI54 Webmaster 1600 Nylon Web One Ply Flat Eye (Type )...NI5 Two Ply Flat Eye (Type )...NI5 One Ply Triangle and Choker (Type 1)..NI5 One Ply Twisted Eye (Type 4)...NI5 Webmaster 1600 Polyester Web One Ply Flat Eye (Type )...NI50 Two Ply Flat Eye (Type )...NI50 One Ply Endless (Type 5)...NI51 Two Ply Endless (Type 5)...NI51 Wear Pads for Slings...NI56 SNAPS Brass Finish...NI8 Nickel Finish...NI8 Stainless Steel Double Bolt...NI7 Swivel Bolt...NI7 Zinc Finish...NI8 SUB-ASSEMBLIES Grade 80...NI1 Grade NI1 Stainless Steel...NI0 TAGS Sling Identification Stamped...NI19 Forged...NI19 Stainless Steel...NI0 TIEDOWN ASSEMBLIES AND ACCESSORIES Load Hugger Cam Style...NI69 Ratchet Style...NI69 E-Track Assemblies...NI7 Series 5,000...NI70 Series 10,000...NI70 Winches...NI71 Winch Assemblies...NI71 Winch Bar...NI71 TRITON PRODUCTS Pegboard Systems/Accessories...NI NI17 TURNBUCKLES Stainless Steel Eye and Eye...NI7 Jaw and Jaw...NI7 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI1

2 NEW s Tempered Pegboard Tempered hardwood, 1/4" commercial-grade pegboard will not fray or dry out like standard paper-based pegboard. Holds two times the weight of standard pegboard and is compatible with all DuraHook products. Height Thickness 4 1/ ² / ² ²196070² DuraBoard DuraBoard is a heavy-duty white polypropylene pegboard Four times greater holding power than traditional pegboard Durable, weather-resistant and washable Full 1/4" thick for maximum holding capacity Board surface is ideal for creating silhouettes of tools to be stored and managed Ideal for DuraHook pegboard hook and standard pegboard hooks Height Thickness 4 1/ ² / ² / ² 1 Kits of Panels Total Square Feet of Hooks and Bin Clips of Bins ² ² ² An assortment of DuraHook locking pegboard hooks, plastic hanging bin system, wall mounting hardware and spacer system. Spacer Kit Eliminates framing hassles and expense; requires no special tools. Includes 15 pieces of each: " #1 wood screws, plastic wall anchors and /8 steel wall spacers ² 15 MagClip Magnetic tool storage mounting system for use with 1/4" or 1/8" pegboard Holds tool securely without the use of hooks or bars Description MagClip pack ² 1 MagClip 5 pack 19606² 1 NI USA: 888.YES.KENT ( ) Canada: kent-automotive.com

3 NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No ) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) Single Rod Bend Angle (Degree) Bend Height Rod Dia / ² /8 90 1/ / ² 10-1/ 0 1/ / ² 10 -/4 90 1/ / ² / / ² / 1/ ² / 1/ ² / 1/ ² 5 Double Rod Bend Angle (Degree) Bend Height Rod Dia. Inside -/4 80 /4 1/4 1-5/ ² 10 5-/4 80 /4 1/4 1-5/ ² /4 80 /4 1/4 1-5/8 1959² 5 Pliers Holder Inside / ² 10 Multi-Prong Tool Holder Rod Dia. Inside 1-/8 8-1/8 /16 7/16, 1/ ² 5 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI

4 NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No ) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) Spring Clip Projection From Wall Holding Range 7/8 1/4 1/ ² /8 1/4 1/ ² /16 1/ ² 10-1/8 /4 1-1/ ² 10-7/8 1-7/8 -/ *² 5 *Spray can holder ²196019²196048*² ² ² Ring Tool Holder Multi-Ring Tool Holder 19601²196076² Type I.D. Rod Dia. Tool Holder, Single Ring 1-/8 /4 / ² 10 Tool Holder, Double Ring 1-7/8 /4 1/ ² 10 I.D. 1-5/8 9 / ² NI4 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

5 NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Curved Hook 19595² Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No ) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) U-Shape Inside -1/8 1-/ ² ² Rod Dia. I.D. -1/4 / ² 10 -/4 1/4 -/ 19595² 10 Double Closed End Loop Bend Angle (Degree) Height Rod Dia. Inside 5 80 /16 -/ ² /16 -/ ² 5 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI5

6 NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Shelf Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No ) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) Kits Depth Load Rating ² 1 Description DuraHook Kit 4 Hooks, Bins ² 1 DuraHook Kit 6 Hooks ² 1 DuraHook Kit 60 Hooks, 4 Bins ² 1 DuraHook Kit 79 Hooks, 4 Bins ² 1 DuraHook Kit 85 Hooks, 10 Bins 19599² 1 BinClip ² 5 NI6 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

7 NEW s LocMat LocMat magnetic roll sheeting is a commercial-grade solution for silhouetting and visually managing tools on steel LocBoards and steel pegboards. The sheets are easily cut and can be used to outline unlimited types of tools and other items. This allows the user to maximize space on the tool board, return items to their proper places when the job is complete and quickly identify items that are missing. Constructed of strontium ferrite to ensure strong bonding ability Chlorinated polyethylene vinyl laminate surface allows tools to be easily traced Durable, weather-resistant hand washable with mild detergent Commercial-grade 6 lbs. pull per square feet keeps product in place when tools are removed and replaced Compatible with LocBoard, flat steel surfaces or steel pegboards Thickness (mil) Color 1 0 Black 19597² Blue 19591² Red 19605² 1 LocBin BinKit DuraHook BinKits provide a commercial-grade bin storage solution to securely store loose parts and tool accessories on a pegboard. BinKits include BinClips that attach and lock to the pegboard and LocBin Plastic Hanging Bins that mount on each BinClip. This allows for an individual bin to be placed on the pegboard or several bins can be interlocked then hung on the pegboard near the first bin. Choose from three sizes to accommodate your storage needs. BinKits include BinClips that attach and lock to the pegboard and LocBin Plastic Hanging Bins that mount on each BinClip Outside Outside Outside Height Capacity of Color Bin Clips 5-/8 4-1/8 1 Yellow ² 4 7-/8 4-1/8 1 Yellow ² / Yellow ² ² ² 19601² USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI7

8 NEW s LocBoard Offering heavy-duty storage solutions that will always ensure the ultimate in holding strength All steel boxed construction with hidden mounting flanges Highest industry load ratings Surface of board is ideal for silhouetting tools and other stored items Boards can be securely mounted horizontally or vertically Mounting hardware is hidden for a clean, durable appearance Attaches to walls, benches, tool carts, wire cages and other vertical surfaces Accommodates all LocHooks Epoxy powder-coated finish Three board sizes to choose from Height Thickness Color 4 9/16 Blue 19604² 4 4 9/16 Tan 1960² 4 9/16 White 19599² 4 9/16 Blue 19607² 4 4 9/16 Tan ² 4 9/16 White ² 18 9/16 Blue 19601² /16 Tan ² 18 9/16 White 19608² Tools not included Kit Mounting Kit ² 4 Includes an assortment of LocHook locking hooks for steel pegboard with square holes, plastic hanging bin system and mounting hardware. of Panels Total Square Feet of Hooks and Bin Clips of Bins ² 1 NI8 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

9 NEW s LocHook Patented - and 4-point contacts attach to LocBoard for metal-to-metal holding confidence Hooks can be mounted vertically or horizontally and can be combined with other hook styles to create custom storage solutions for virtually any tool shape or weight Single Rod Special LocScrews hold hooks securely in place horizontally and vertically and prevent any accidental removal Heavy-duty steel construction, zinc-plated with chromate dip to offer years of secure holding power Use with LocBoard steel pegboards with square holes Double Rod Bend Angle (Degree) Bend Height Rod Dia. 1/ 0 /4 / ² / / ² /8 / ² 5 1-1/ 0 / ² /8 / ² 5 0 / ² 5 0 1/ 1/ ² / / ² /4 1/ ² / 1/ ² 5 Bend Angle (Degree) Bend Height Rod Dia. Inside 1 0 1/ / / ² /4 / / ² 5 0 1/ / / ² 5 0 1/ / / ² 5 90 /4 / / ² /4 1/4 1-5/8 1960² 5 5-/4 80 /4 1/4 1-5/ ² 5 Pliers Holder Inside 1-/8 1-/ ² 5 Multi-Prong Tool Holder Rod Dia. Inside 1-1/ 8-1/8 /16 7/16, 1/ ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI9

10 NEW s LocHook Patented - and 4-point contacts attach to LocBoard for metal-to-metal holding confidence Hooks can be mounted vertically or horizontally and can be combined with other hook styles to create custom storage solutions for virtually any tool shape or weight Ring Tool Holder Special LocScrews hold hooks securely in place horizontally and vertically and prevent any accidental removal Heavy-duty steel construction, zinc-plated with chromate dip to offer years of secure holding power Use with LocBoard steel pegboards with square holes Multi-Ring Tool Holder ² 19600²19605² I.D. 1-1/8 1/ 19605² 5 1-5/ ² 5-1/ 1-/ ² 5 I.D. 1-5/8 9 / ² Spring Clip ² 19591²196069² ² 19597²19598² ² Projection From Wall Holding Range 7/8 1/4 1/ ² 5 1-1/4 1/4 1/ 19591² 5 1-1/ 1/ ² 5 /4 1-1/ ² 5 -/ ² 5 -/4 1-1/ -/ ² 5 Curved Hook BinClip Rod Dia. I.D. -1/4 / ² 5 -/4 1/4 -/ 1959² ² 1959² 1960² 5 NI10 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

11 NEW s LocHook Patented - and 4-point contacts attach to LocBoard for metal-to-metal holding confidence Hooks can be mounted vertically or horizontally and can be combined with other hook styles to create custom storage solutions for virtually any tool shape or weight Double Closed End Loop Special LocScrews hold hooks securely in place horizontally and vertically and prevent any accidental removal Heavy-duty steel construction, zinc-plated with chromate dip to offer years of secure holding power Use with LocBoard steel pegboards with square holes Shelf ² 19604² Bend Angle (Degree) Height Rod Dia. Inside 5 80 /16 -/ ² /16 -/ ² 5 Depth Load Rating / ² 1 Kits 19594² ² Description LocHook Kit 46 Hooks 19594² 1 LocHook Kit 6 Hooks ² 1 LocHook Kit 8 Hooks, Bins ² ² USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI11

12 NEW s Stainless Steel LocBoard Constructed of 04 brushed stainless steel with square holes that accommodate stainless steel LocHooks Perfect storage solution for sterile or harsh environments in health, medical, food, marine industry and commercial applications Sturdy mounting flanges make it easy to attach LocBoards to almost any wall or other vertical surface Box construction eliminates the need for spacers between board and wall Stainless steel LocBoards have a lifetime warranty and will not rust or corrode in extreme hot or cold temperatures Includes stainless steel mounting screws that will be hidden from sight after installation, providing a clean and attractive appearance Commercial construction allows for years of heavy-duty use while maintaining a shiny, polished surface Kit Height Thickness / ² 1 of Panels Total Square Feet of Hooks and Bin Clips of Bins ² 1 Mounting Kit ² 4 NI1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

13 NEW s Stainless Steel LocHook Patented stainless steel LocHooks with - and 4-point interlocking tabs attach vertically or horizontally, locking to stainless steel LocBoard with stainless metal screws repositioning hooks will not damage the board. LocHooks are offered in unique styles, including extended and standard spring clips, and BinClips to mount plastic hanging bins Heavy-duty boxed stainless steel construction offers years of dependable holding power, especially for heavy or oddshaped items Single Rod Stainless steel LocHook used with stainless steel LocBoard provide a stainless storage solution, ideal for medical, health care, restaurant, food, marine and commercial applications made from 04 brushed stainless steel Lifetime warranty won t rust or corrode, even in extreme temperatures Double Rod 1959² Bend Angle (Degree) Bend Height Rod Dia / / ² 0 1/ 1/4 1959² 6 90 /4 1/ ² ² 19606² Bend Angle (Degree) Bend Height Rod Dia. Inside 4 90 /4 1/4 1-5/ ² Spring Clip Curved Hook ² Projection From Wall Holding Range 7/8 /4 1-1/ ² ² -/4 1/4 1/ 19598² ² 19598² Rod Dia. I.D. -1/4 / ² USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI1

14 NEW s Stainless Steel LocHook Patented stainless steel LocHooks with - and 4-point interlocking tabs attach vertically or horizontally, locking to stainless steel LocBoard with stainless metal screws repositioning hooks will not damage the board. LocHooks are offered in unique styles, including extended and standard spring clips, and BinClips to mount plastic hanging bins Heavy-duty boxed stainless steel construction offers years of dependable holding power, especially for heavy or oddshaped items Multi-Prong Tool Holder Stainless steel LocHook used with stainless steel LocBoard provide a stainless storage solution, ideal for medical, health care, restaurant, food, marine and commercial applications made from 04 brushed stainless steel Lifetime warranty won t rust or corrode, even in extreme temperatures Multi-Ring Tool Holder Inside 1-1/ 8-1/8 1/, / ² 1 I.D. 1-7/8 9 / ² 1 Shelf BinClip Depth Load Rating / ² ² NI14 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

15 NEW s XtraWall Pegboard Swing Panel Storage Systems XtraWall heavy-duty double-sided panel systems are designed to hold a large amount of tools and parts in a fraction of the wall space normally required. These turnkey systems offer dense tool storage on minimal wall surface by expanding the pegboard storage surface when wall space is at a premium. Steel pivot wall brackets can be mounted to cement block or wood stud walls. Wood stud installation will require " x 6" headers (not provided). Wall mounting bracket and hardware are included. For best holding results on XtraWall swing panels, use DuraHook locking hooks. Height of Panels Swing Radius Load Rating ² ² ² ² ² ² Tools not included DuraBoard Tool Cart with Tray DuraBoard mobile tool cart is equipped with industrialstrength, impact-resistant 1/4" thick polypropylene pegboards and has a 650 lb. load rating, sq. ft. of storage space and 8 sq. ft. of tray space. Use with DuraHook double-locking pegboard hooks for secure storage solutions that can be conveniently transported within a service environment. Dual-sided storage allows users to effciently organize, manage and store precision tools, hand tools, equipment and small parts without clutter Tools and equipment can be transported virtually anywhere within a plant or service environment a secure locking system ensures items stay in place Pull handle and durable neoprene casters ( fixed and swivel locking) make it easy to roll the mobile tool carts anywhere across flat surfaces Fully-visible storage system improves tool accountability and proper tool usage while increasing overall performance Height Depth Load Rating 51-1/ 48 9-/ ² 1 Tools not included Narrow base allows the user to transport tools around tight corners and through narrow door openings s can be secured on the tool cart with locking DuraHook Cart frames are made of extra heavy-duty 10 gauge aluminum and equipped with a sturdy aluminum bottom tray for tool boxes, paint cans, lumber and large items Highest load rating in the industry! USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI15

16 NEW s LocBoard Dual-sided storage allows users to effciently organize, manage and store precision tools, hand tools, equipment and small parts without clutter Tools and equipment can be transported virtually anywhere within a plant or service environment a secure locking system ensures items stay in place Pull handle and durable neoprene casters ( fixed and swivel locking) make it easy to roll the mobile tool carts anywhere across flat surfaces Fully-visible storage system improves tool accountability and proper tool usage while increasing overall performance Narrow base allows the user to transport tools around tight corners and through narrow door openings Cart frames are made of extra heavy-duty 10 gauge aluminum and equipped with a sturdy aluminum bottom tray for tool boxes, paint cans, lumber and large items Tools not included Highest load rating in the industry! s can be secured on the tool cart with LocHooks with - and 4-point contact locking features Tool Cart with Tray Tool Cart System Height Depth Load Rating 9-1/4 6-/4 1-1/ ² / ² 1 Includes 56 piece LocHook assortment and 4 LocBins Height Depth Load Rating 9-1/4 6-/4 1-1/ ² 1 NI16 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

17 NEW s Stainless Steel LocBoard Dual-sided storage allows users to effciently organize, manage and store precision tools, hand tools, equipment and small parts without clutter Tools and equipment can be transported virtually anywhere within a plant or service environment a secure locking system ensures items stay in place Pull handle and durable neoprene casters ( fixed and swivel locking) make it easy to roll the mobile tool carts anywhere across flat surfaces Fully-visible storage system improves tool accountability and proper tool usage while increasing overall performance Narrow base allows the user to transport tools around tight corners and through narrow door openings Cart frames are made of extra heavy-duty 10 gauge aluminum and equipped with a sturdy aluminum bottom tray for tool boxes, paint cans, lumber and large items Highest load rating in the industry! Tool Cart with Tray The stainless steel tool cart is manufactured to be the ideal mobile storage solution for medical, food and marine environments when used with stainless steel LocHooks. The sturdy frame is constructed of anodized aluminum and the stainless steel LocHook Tools not included pegboards are made of 04 brushed aluminum that will not corrode or rust, even in extreme temperature changes! It has 18 sq. ft. of storage surface with 4.9 sq. ft. of tray storage and a convenient storage shelf at the top of the cart. Load rating is the highest in the industry at 800 lbs. s can be secured on the tool cart with LocHooks with - and 4-point contact locking features Tool Cart System Height Depth Load Rating 9-1/ 6-/4 1-1/ ² 1 Includes 60 piece Stainless Steel LocHook assortment and LocBins Height Depth Load Rating 9-1/ 6-/4 1-1/ ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI17

18 NEW s HERC-ALLOY 1000 (Grade 100) Chain Approved for overhead lifting 5% higher working load limit when compared to Grade 80 Meets or exceeds many national and international standards 100% proof tested Chain Chain Dia. Inside Link Inside Link 7/ 800, ² 1 5 4, / 10 4, , , ¹ 1 5 8, /8 10 8, , , ¹ , / 10 15, , , ¹ 1 5/8 00, ¹ 1 / , ¹ 1 1 Usually ships in to 4 days Temperature F C Reduction of While at Temperature After Exposure to Temperature <400 <04 None None % None % 5% % 15% % 0% % 5% % 0% 1, % 5% HERC-ALLOY 800 (Grade 80) Chain Approved for overhead lifting Meets or exceeds many national and international standards Certification included with every drum 100% proof tested Chain Chain Dia. Inside Link Inside Link 7/ 800, ² 1 5, , / 5, , ² 1 500, ¹ 1 5 7, , /8 5 7, , ² , ¹ 1 5 1, , / 5 1, , ² , ¹ 1 5/ , ¹ 1 / , ¹ 1 7/ , ¹ , ² 1 1-1/4 90 7, ¹ 1 1 Usually ships in to 4 days Temperature F C Reduction of While at Temperature After Exposure to Temperature <400 <04 None None % None % None % 5% % 10% % 15% % 0% 1, % 5% NI18 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

19 NEW s Hammerlok Coupling Links Attaches chain to master link and hooks Quench and tempered alloy steel 100% proof tested Grade 100 Chain Working Load Limit A B C D E F 7/, / 4, /8 8, / 15, /8, /4 5, Grade 80 Chain Working Load Limit A B C D 7/8 4, , ¹ 1 1-1/4 7, ³ 1 1 Usually ships in to 4 days Usually ships in 1 to weeks C A B D Sling Identification Tags Stamped Description Without Ring With " Key Ring Forged USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI19

20 NEW s Master Links Grade 100 Designed to accept HERC-ALLOY 1000 chain and components Durable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested C A B Trade Working Load Limit A B C Chain : Single Chain : Double Chain : Triple Chain : Quad 1/ 5, / 7/ / 8, / 9/ 7/ 7/ /4 17, /8 /8 9/ 9/ , / or 5/8 1/ /8 / /4 45, /4 5/8 1/ 1/ / 70, /4 5/8 5/ ¹ 1 1-/4 105, /4 / ¹ 1 1 Usually ships in to 4 days Grade 80 Designed to accept HERC-ALLOY 800 chain and components Durable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested Trade A B C Chain : Single Chain : Double 1-/4 7, / ¹ 1 88, / ³ 1-1/4 15, / ³ 1 1 Usually ships in to 4 days Usually ships in 1 to weeks C A B Lifting Angles and s Angle From the Horizontal Usable Percent of % 70 96% 60 86% 55 81% 50 76% 45 70% 40 64% 5 57% 0 50% NI0 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

21 NEW s Sub-Assemblies Grade 100 Designed for Triple and Quad branch HERC-ALLOY 1000 chain slings Consists of an Oblong Master Link and two welded Master Coupling Links Durable orange powder coated finish May be used for mechanical or welded sling assemblies 100% proof tested stated at 60. F C A B D E Trade Working Load Limit A B C D E F Chain : Triple Chain : Quad 1/ 7, / 7/ /4 11, / 9/ , /8 / /4 9, / 1/ / 58, /8 5/ ¹ 1 1-/4 91, /4 / ¹ 1 1 Usually ships in to 4 days C A Grade 80 Designed for Triple and Quad branch HERC-ALLOY 800 slings Consists of an Oblong Master link and two Master Coupling links Durable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested stated at 60. E F B D Trade Working Load Limit A B C D E F Chain : Triple Chain : Quad 10, /8 7/ ³ 1-1/4 144, ³ 1 -/4 16, /4 1-1/ ³ 1 Usually ships in 1 to weeks USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI1

22 NEW s Clevlok Sling Hooks with Latch Grade 100 Fraction and metric markings Fatigue rated to Grade 100 specifications Fits Grade 80 and Grade 100 chain I beam body 100% proof tested Durable orange powder coated finish Improved forged latch CE compliant hooks and latches Meets EN 1677 Chain Working Load Limit D G H I L M O P R Replacement Latch Kit 7/, ² 1 9/ 4, /8 8, / 15, /8, /4 5, ¹ 1 1 Usually ships in to 4 days Clevlok Cradle Grab Hooks Grade 100 Fits Grade 80 and Grade 100 chain Fraction and metric markings I beam body with chain cradle saddle 100% proof tested Chain Working Load Limit D G H Fatigue rated to Grade 100 specifications Durable orange powder coated finish J K L M P R 9/ 4, /8 8, / 15, /8, Usually ships in 1 to weeks R P L D H M G J K NI USA: 888.YES.KENT ( ) Canada: kent-automotive.com

23 NEW s Eye Sling Hooks with Latch Grade 100 Fraction and metric markings Durable orange powder coated finish 100% proof tested Fatigue rated to Grade 100 specifications S M P L O D I H E N B K G Chain Working Load Limit Dim. B Dim. D Dim. E Dim. G Dim. H Dim. I Dim. K Dim. L Dim. M Dim. N Dim. O Dim. P Dim. S Rep. Latch Kit 7/, / 4, /8 8, / 15, /8, /4 5, ¹ 1 Usually ships in to 4 days Grade 80 Quench and tempered alloy steel 100% proof tested Fatigue rated Durable orange powder coated finish S M P L O D I H E N B K G Chain Working Load Limit Dim. B Dim. D Dim. E Dim. G Dim. H Dim. I Dim. K Dim. L Dim. M Dim. N Dim. O Dim. P Dim. S 7/8 4, ¹ , ¹ 1 1-1/4 7, ¹ 1 1 Usually ships in to 4 days Latchlok Hook Reference Chart Attachment Type WLL 4:1 (Lbs.) WLL 5:1 (Lbs.) Hook : 9/" Maximum : 4,00 Lbs. Grade 80 9/",500,800 Grade 100 9/" 4,00,440 Round Sling (Vertical) Purple,50,600 Wire Rope (EIP) /8",775,00 Hook : /8" Maximum : 8,800 Lbs. Grade 80 /8" 7,100 5,680 Grade 100 /8" 8,800 7,040 Round Sling (Vertical) Green 6,65 5,00 Wire Rope (EIP) 9/16" 8,400 6,70 Attachment Type WLL 4:1 (Lbs.) WLL 5:1 (Lbs.) Hook : 1/" Maximum : 15,000 Lbs. Grade 80 1/" 1,000 9,600 Grade 100 1/" 15,000 1,000 Round Sling (Vertical) Yellow 10,500 8,400 Round Sling (Vertical) Tan 1,50 10,600 Wire Rope (EIP) /4" 14,700 11,760 Hook : 5/8" Maximum :,600 Lbs. Grade 80 5/8" 18,000 14,400 Grade 100 5/8",600 18,080 Round Sling (Vertical) Red 16,500 1,00 Round Sling (Vertical) White 1,000 16,800 Wire Rope (EIP) 7/8" 19,900 15,90 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI

24 NEW s Latchlok Hooks Grade 100 Do not apply load unless latch and hook are completely closed and locked Make certain that the latch does not support any part of the load When lifting, make certain that the load is firmly seated in the base (bowl) of the hook Inspect hook and latch periodically. If the hook or latch is damaged or if the latch fails to interlock with the tip, the hook should be removed from service Do not exceed the working load limit Do not use if the hook is visibly distorted, damaged or worn Clevlok Style High cycling, long life spring I beam construction for greater strength Chain Working Load Limit D F G H J Keep body and other objects clear of the latch when closing to avoid the pinch point Do not side load or tip load hook 100% proof tested Fatigue rated to Grade 100 specifications Durable orange powder coated finish K L M P 9/ 4, /8 8, / 15, /8, ³ 1 Usually ships in 1 to weeks L Pin ø M Reach P H D F G J K A H M (Reach) F Eye Style Large eye design for use with chain, wire rope and synthetic material P D K Chain A D F H K M P 9/ 4, /8 8, / 15, /8, ³ 1 Usually ships in 1 to weeks A H B M (Reach) F Bushing Swivel Style The eye easily positions to attach to the load P D K Chain A B D F H M P 9/ 4, /8 8, / 15, /8, ³ 1 Usually ships in 1 to weeks NI4 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

25 NEW s Weld-On Lifting Hooks Heavy steel construction with a durable finish Designed for use with excavating equipment can be welded directly onto the bucket Latch prevents accidental unhooking A B C E F G, , , , Grade 70 Transport (Binding) Chain Meets ASTM and NACM standards Meets FMCSA and CVSA requirements Heat treated for superior wear and toughness 100% proof tested Permanent identification on chain Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link 10, ² 1 1/4 400, ² 1 800, ² , *² , ² 1 5/ , *² , ² , *¹ , ¹ , *² , ² 1 /8 00 6, *² , ² , *¹ , ¹ 1 1/ , ² , ² 1 *Short Link design 1 Usually ships in to 4 days Assemblies Meets FMCSA, CVSA, DOT requirements Clevis Grab Hooks attached on each end Short Link design Chain 1/4 0, /16 0 4, /8 0 6, / 0 11, USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI5

26 NEW s Grade 70 Transport (Binding) Chain Attachments Clevis Slip Hooks, Grade 70 Meets ASTM and NACM standards Designed specifically for Grade 70 Transport Chain Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain *Grade 6 D H L P R P R W 1/4, * 1 5/16 4, /8 6, /16 6, * 1 1/ 9, * 1 5/8 14, * 1 W D H L A Clevis Grab Hooks, Grade 80 Quench and tempered alloy steel Durable orange powder coated finish Meets ASTM and NACM Standards 4:1 design factor Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. D B C Chain A B C D 1/4, /16 4, /8 7, /16 6, * 1 1/ 1, /8 18, *Grade 6 Minimum Number of Chains Required to Secure Loads in Forward Direction by Weight of the Article in Lbs. Chain Grade (Lbs.) 5,000 10,000 15,000 0,000 5,000 0,000 5,000 40,000 45,000 50,000 5/16 1, /8, /16, /8 5, /4, /16 4, /8 6, /, /, /16 4, /8 7, /, / 4, /8 8, This chart indicates the minimum number of chains required to secure loads in the forward direction (0.8g deceleration)* per federal Motor Carriers Safety Administration, DOT Regulations; per 49CFR, Part 9 Paragraph 9.10 *Refer to 49CFR, Parts 9 and 9, for North American Standard for Protection Against Falling and Shifting Cargo for complete regulation NI6 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

27 NEW s Load Binders Ratchet Type Meets all DOT specifications Each ratchet component is forged from pure alloy steel Handle is designed loose using self-locking one-way bolts allowing easy removal of unwanted debris such as mud, snow or ice Proof tested to 50% of the minimum breaking strength Gears are permanently welded to the barrel Chain : Grade 0 Chain : Grade 4 Chain : Grade 70 Chain : Grade 80 Working Load Limit Take Up Handle 1/4 1/4, /8 /8 /8 /8 7, /8 /8 5/16 5/16 5, / 1/ /8 /8 9, Load Binders QuikBinder PLUS Ratchet Load Binder The QuikBinder PLUS is easier to install than standard ratchet load binders. The -position pawl offers the user a choice of ratchet extension, ratchet takeup or a free spin setting for fast adjustment in either direction. A load can be secured in half the time. Folding handle for more compact storage Tamper resistant use a long shank padlock to secure load chain to binder assembly Meets DOT, CVSA, and CCMTA requirements Chain : Grade 70 Chain : Grade 80 Working Load Limit Take Up 5/16 /8 7, /8 1/ 1, / 5/8 18, USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI7

28 NEW s Grade 4 High Test Chain Grade 4 Chain features both high tensile strength and resistance to wear needed by modern hauling and heavy duty trucking, farm and construction firms. s exceed those of ordinary low carbon or general utility chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link 150, / , ³ 1 800, ³ 1 100, / , ³ 1 550, ³ , /8 00, ³ , ³ 1 Usually ships in 1 to weeks Grade 0 Proof Coil Chain A general utility chain for farm and industrial applications such as: log chain, cargo lashing, pipeline hanging, tailgate, guard rail, tow and switch chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link / ³ ³ , / , ³ , ³ 1 9 1, / , ³ , ³ 1 6, /8 00, ³ 1 400, ³ 1 1/ 5 4, ³ 1 Usually ships in 1 to weeks NI8 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

29 NEW s Grade 4 High Test and Grade 0 Proof Coil Chain Attachments Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Clevis Slip Hook with Latch Chain Working Load Limit A B C D 1/4, /16, /8 5, / 9, Clevis Slip Hook Chain Working Load Limit A B C D 1/4, /16, /8 5, Eye Slip Hook with Latch Chain Working Load Limit A B C D 1/4, ³ 10 5/16, ³ 10 /8 5, ³ 10 Usually ships in 1 to weeks Eye Slip Hook Chain A B C 1/4, /16, /8 5, Clevis Grab Hook Chain Working Load Limit A B C D 1/4, /16, /8 5, / 9, Eye Grab Hook Chain A B C 1/4, /16, /8 5, USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI9

30 NEW s Grade 50 Lifting Chain Stainless Steel Approved for overhead lifting Chain Chain Dia. Inside Link Inside Link /16 1, ² 1 Ft. 9/, ² 1 Ft. 5/16, ² 1 Ft. /8 4, ² 1 Ft. 1/ 7, ² 1 Ft. Sold by the foot Temperature F C Reduction of While at Temperature After Exposure to Temperature <400 <04 None None % None % None 1, % None 1, % None 1, % None 1, % None 1, % None Stainless Steel Coupling Links Chain /16 1, ² 1 1/4, ² 1 5/16, ² 1 /8 4, ² 1 1/ 7, ² 1 5/8 11, ² 1 Stainless Steel Sling Identification Tag 1.5 *Tag is blank Thickness ² *² 1 Master Links Stainless Steel Trade Working Load Limit A B C Chain : Single Chain : Double /8 1, /16 / ² 1 1/, /4 1/ ² 1 5/8, /16 5/ ² 1 /4, /8 /8 1478² 1 1 8, / 1/ 14784² 1 1-1/4 11, ² 1 C A B A C Sub-Assemblies Stainless Steel Trade A B C D F Chain : Triple F Chain : Quad 1/, /16 / ² 1 5/8, /4 1/ ² 1 /4, /16 5/ ² 1 1 8, /8 / ² 1 1-1/4 11, / 1/ 14780² 1 E B D NI0 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

31 NEW s Industrial Chain Stainless Steel Sold by the foot Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link 5/ ² 1 Ft. /16 1, ² 1 Ft. 1/4 1, ² 1 Ft. 5/16, ² 1 Ft. /8, ² 1 Ft. Stainless Steel Hooks Clevis Slip Hooks with Latch Chain A B C D 1/4 1, ² 1 5/16 1, ² 1 /8, ² 1 1/, ² 1 Clevis Grab Hooks Chain A B C D 1/4 1, ² 1 5/16, ² 1 /8, ² 1 1/, ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI1

32 NEW s Anchor Shackles Carbon steel bodies Alloy steel pins and traceability codes shown as permanent marking on body and pin Screw Pin All shackles meet or exceed Federal Specification RRC-71F, Type IVA, Grade A, Class Design factor 6:1 Pin Dia. Finish /16 1/4 1,000 Galvanized /4 5/16 1,500 Orange Powder Coated /16 /8,000 Orange Powder Coated /8 7/16,000 Orange Powder Coated /16 1/ 4,000 Orange Powder Coated / 5/8 6,000 Orange Powder Coated /8 /4 9,000 Orange Powder Coated /4 7/8 1,000 Orange Powder Coated /8 1 17,000 Orange Powder Coated /8 0,000 Orange Powder Coated /8 1-1/4 4,000 Orange Powder Coated /4 1-/8 8,000 Orange Powder Coated /8 1-1/ 4,000 Orange Powder Coated / 1-5/8 40,000 Orange Powder Coated /8 1-/4 48,000 Orange Powder Coated ³ 1 1-/4 60,000 Orange Powder Coated ³ 1-1/4 70,000 Orange Powder Coated ³ 1 Usually ships in 1 to weeks Pin Dia. Anchor Shackles Screw Pin Screw Pin Anchor Shackles are ideal for those applications where frequent pin removal is needed. Hot-dipped galvanized to ASTM A15 Proof load at times Ultimate load at 6 times the Meets Federal Specification RR-C-71F, Type IVA, Grade A, Class Pin Dia. Finish /16 1/4 667 Galvanized /4 5/16 1,000 Galvanized /16 /8 1,500 Galvanized /8 7/16,000 Galvanized /16 1/,000 Galvanized / 5/8 4,000 Galvanized /8 /4 6,500 Galvanized /4 7/8 9,500 Galvanized /8 1 1,000 Galvanized /8 17,000 Galvanized /8 1-1/4 19,000 Galvanized /4 1-/8 4,000 Galvanized /8 1-1/ 7,000 Galvanized ³ 5 1-1/ 1-5/8 4,000 Galvanized ³ 5 1-/4 50,000 Galvanized ³ 1-1/4 70,000 Galvanized 14489³ 1 Usually ships in 1 to weeks NI USA: 888.YES.KENT ( ) Canada: kent-automotive.com

33 NEW s Anchor Shackles Round Pin Carbon steel bodies Alloy steel pins and traceability codes shown as permanent marking on body and pin All shackles meet or exceed Federal Specification RRC-71F, Type IVA, Grade A, Class 1 Design factor 5:1 Pin Dia. Finish /16 1/4 1,000 Galvanized /4 5/16 1,500 Galvanized /16 /8,000 Galvanized /8 7/16,000 Galvanized /16 1/ 4,000 Galvanized / 5/8 6,000 Orange Powder Coated /8 /4 9,000 Orange Powder Coated /4 7/8 1,000 Orange Powder Coated /8 1 17,000 Orange Powder Coated /8 0,000 Orange Powder Coated /8 1-1/4 4,000 Orange Powder Coated /4 1-/8 8,000 Orange Powder Coated /8 1-1/ 4,000 Orange Powder Coated / 1-5/8 40,000 Orange Powder Coated /8 1-/4 48,000 Orange Powder Coated ³ 1 1-/4 60,000 Orange Powder Coated 14991³ 1-1/4 70,000 Orange Powder Coated 14991³ 1 Usually ships in 1 to weeks Pin Dia. Bolt, Nut and Cotter Carbon steel bodies Alloy steel pins and traceability codes shown as permanent marking on body and pin All shackles meet or exceed Federal Specification RRC-71F, Type IVA, Grade A, Class Design factor 6:1 Pin Dia. Finish 1/4 5/16 1,500 Galvanized /16 /8,000 Galvanized /8 7/16,000 Galvanized /16 1/ 4,000 Galvanized / 5/8 6,000 Galvanized /8 /4 9,000 Galvanized /4 7/8 1,000 Galvanized /8 1 17,000 Galvanized /8 0,000 Galvanized /8 1-1/4 4,000 Galvanized /4 1-/8 8,000 Galvanized /8 1-1/ 4,000 Galvanized USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI

34 NEW s Anchor Shackles Stainless Steel 16 Stainless Steel Screw Pin Meets Federal Specification RR-C-71F, Type IVA, Class Pin Dia. /16 1/ ² 1/4 5/16 1, ² 5/16 /8 1, ² /8 7/16 1, ² 7/16 1/, ² 1/ 5/8, ² 5/8 /4 4, ² /4 7/8 6, ² 7/8 1 8, ² /8 10, ² 1 1-1/4 1-/8 14, ² 1 Round Pin Meets Federal Specification RR-C-71F, Type IVA, Class 1 Pin Dia. 1/4 5/16 1, ² 5/16 /8 1, ² /8 7/16 1, ² 7/16 1/, ² 1/ 5/8, ² 5/8 /4 4, ² /4 7/8 6, ² 7/8 1 8, ² /8 10, ² 1 1-1/4 1-/8 14, ² 1 Bolt, Nut and Cotter Meets Federal Specification RR-C-71F, Type IVA, Class Pin Dia. 1/4 5/16 1, ² 5/16 /8 1, ² /8 7/16 1, ² 7/16 1/, ² 1/ 5/8, ² 5/8 /4 4, ² /4 7/8 6, ² 7/8 1 8, ² /8 10, ² 1 1-1/4 1-/8 14, ² 1 NI4 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

35 NEW s Long Reach Shackles Alloy steel Load rated forged on body Meets the requirements of ASME B0.6 Design factor of 5:1 Screw Pin Pin Dia. Finish 5/8 /4 7,000 Orange Powder Coated /4 7/8 10,000 Orange Powder Coated ,000 Orange Powder Coated /4 1-/8 8,000 Orange Powder Coated / 1-5/8 4,000 Orange Powder Coated /4 50,000 Orange Powder Coated 14997¹ 1 1 Usually ships in to 4 days Bolt, Nut and Cotter Pin Dia. Finish 5/8 /4 7,000 Self Colored 14998³ /4 7/8 10,000 Self Colored 14999³ ,000 Self Colored ³ 1-1/4 1-/8 8,000 Self Colored ³ 1-1/ 1-5/8 4,000 Self Colored 14994³ 1 1-/4 50,000 Self Colored 14994³ 1 Usually ships in 1 to weeks USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI5

36 NEW s Connecting Links For temporary chain repair and coupling of attachments Use one size larger than chain size Carbon Steel Chain Inside Inside 1/4 1, /16 1, /8, / 4, Stainless Steel Forged Chain Working Load Limit Inside Inside 1/4 1, ² 1 5/16, ² 1 /8, ² 1 Stainless Steel Cast Chain Working Load Limit Inside Inside / ² 1 1/ ² 1 5/16 1, ² 1 /8 1, ² 1 1/, ² 1 5/8 4, ² 1 Lap Links For temporary chain repair and coupling of attachments Use one size larger than chain size Carbon Steel Chain Working Load Limit Inside Inside / / / , /8 1, Stainless Steel Chain Working Load Limit Inside Inside / ² 5 1/ ² 5 5/ ² 5 NI6 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

37 NEW s Quick Links Stainless Steel Fast, easy connections for chain and attachments Inside Inside Opening Working Load Limit 1/ ² / ² 1/ , ² 5/ , ² / , ² 1/ , ² Turnbuckles Stainless Steel Eye and Eye Jaw and Jaw Meets Federal Specification F1145-9, Type 1, Class D Dia. Take Up 1/ ² 1 5/ ² 1 / , ² 1 1/ 6.00, ² 1 Meets Federal Specification F1145-9, Type 1, Class G Dia. Take Up 1/ ² 1 5/ ² 1 / , ² 1 1/ 6.00, ² 1 Snaps Stainless Steel Double Bolt Snaps Snap ² ² ² Stainless Steel Swivel Bolt Snaps Eye Snap / ² 1/ ² 5/ ² / ² 1-1/ ² USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI7

38 Snaps Brass Finish Type Style Code Usually ships in 1 to weeks Eye Double End P /8-1/ Swivel Eye J /4-1/ Bolt Snap Swivel Eye J 1-1/ 14497³ 10 Swivel Eye J 1-1/8 4-5/ ³ 10 Swivel Strap Eye A 1/ ³ 0 Fixed Eye I / Quick Snap Fixed Eye I 5/8-7/ ³ 10 Swivel Eye B 9/16-1/ ³ 0 Swivel Eye B 5/8-5/ ³ 10 Trigger Snap Swivel Eye F 1-1/8 -/ A C E NEW s B D F Nickel Finish Type Style Code Usually ships in 1 to weeks Eye Double End P 1/4-1/ Double End P 5/8 4-5/ ³ 0 Fixed Eye R 5/8-5/ ³ 10 Fixed Strap Eye K 1-1/ ³ 10 Bolt Snap Key Ring Swivel Eye L 1 -/ ³ 10 Open End N 1/ -1/ Swivel Eye J /4 -/ ³ 10 Swivel Eye J 7/8 -/ ³ 0 Swivel Eye J ³ 0 Swivel Strap Eye A 5/8 -/ ³ 40 Bull Snap Swivel Eye D 7/ ³ 10 Cap Snap Swivel Eye H /4 -/ ³ 0 Swivel Eye H 1-5/ ³ 10 Quick Snap Swivel Eye B /4-1/ ³ 40 Safety Snap Fixed Eye O /4-1/ Snap Open End G 1/4-7/ Key Ring Swivel E 7/8 4-1/ ³ 10 Spring Snap Swivel Eye C 1/ -1/ ³ 10 Open End M /8-1/ Swivel Eye C /4-7/ ³ 50 Trigger Snap Swivel Eye F /4-9/ ³ 40 Swivel Eye F /4-7/ ³ 0 G I K M H J L N O P Zinc Finish Type Style Code Bolt Snap Eye Swivel Eye J /8-15/ Swivel Eye J 5/8 4-1/ Q R Anodized Spring Link Code Q NI8 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

39 NEW s Spring Links Carbon Steel Working Load Limit / / / / / / Stainless Steel Working Load Limit / ² 1/ / ² 5/ / ² / / ² S-Hooks Stainless Steel Overall Opening in Hooks Wire Dia. Working Load Limit / ² / ² / ² / ² / ² 10 U-Hooks Stainless Steel Overall Opening in Hooks Wire Dia. Working Load Limit / ² / ² / ² 10 Jack Chain Jack Chain is the lightest and smallest of regular commercial chain formed from wire. It is used in applications where high strength is not required. Carbon Steel Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Stainless Steel Chain Container Type # Carton # Carton #1 100 Carton # Carton #8 100 Carton #6 100 Carton Chain # ² 1 # ² 1 # ² 1 # ² 1 # ² 1 Lock Link Chain Passing Link Chain The strongest weldless chain with all links facing in the same direction, making it ideal for pipe suspension and operating overhead doors and steam valves. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type /0 100 Carton A welded chain with links sufficiently wide to allow them to pass on another freely, eliminating the tendency to kink. It is used for gates, farm machinery and general utility industry. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type /0 100 Carton /0 100 Carton USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI9

40 NEW s Safety Chain Brass Plumbers Chain Stainless Steel Safety chain is a stamped and formed solid brass chain used for plumbing fixtures, as well as other uses requiring a light flat metal chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type 1/0 00 Reel /0 100 Carton /0 100 Carton Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain 1/ ² 1 / ² 1 Sash Chain Sash Chain is a stamped, formed chain slightly stronger than Jack Chain. It is used for operating heater controls on ducts and dampers, as well as window sashes in double hung windows. Carbon Steel Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Stainless Steel Chain Container Type #8 100 Carton #5 100 Carton #5 100 Carton # Carton Chain # ² 1 # ² 1 # ² 1 Straight Link Coil Chain Twist Link Coil Chain Straight Link Coil Chain is a welded chain easily identified by its link design. The link is long and relatively narrow in proportion. It s an excellent choice for tailgates, trailer safety chain and barrier chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type #4 100 Carton # 100 Carton /0 100 Carton /0 100 Carton /0 00 Pail /0 50 Pail /0 100 Carton A modification of straight link coil chain which allows the chain to lay flatter. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type /0 100 Carton /0 100 Carton NI40 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

41 NEW s Straight Link Machine Chain Straight Link Machine Chain is a welded chain noted for its flexibility. Used for overhead doors, tailgates and agricultural implements. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type #4 100 Carton # 100 Carton /0 100 Carton /0 100 Carton Twist Link Machine Chain A modification of straight link chain which allows the chain to lay flatter. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Carbon Steel Stainless Steel Sold by the foot Chain Container Type #4 100 Carton # 100 Carton /0 100 Carton Chain 5/ ² 1 Ft. / ² 1 Ft. 1/ ² 1 Ft. 9/ ² 1 Ft. 5/ ² 1 Ft. 1/ ² 1 Ft. Twin Loop Chain A weldless chain that combines strength, flexibility, light weight and neat appearance. It is an all-purpose chain for a wide variety of uses including swing sets, animal chains and hammocks. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Carbon Steel Stainless Steel Chain Container Type #5 100 Carton # 100 Carton # 100 Carton /0 100 Carton /0 100 Carton /0 100 Carton Chain / ² 1 # ² 1 # ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI41

42 NEW s Lever Operated Hoists Series 65 The Series 65 Lever Operated Hoist is a high-quality, rugged, steel tool for close quarter pulling, stretching, and hoisting applications. Its characteristic short handle, along with minimal lever pull effort, make this tool ideal for a broad range of applications. Meets ASME B0.1 Manually Lever Operated Hoist Standard and European CE Standard Ideal for construction and industrial applications Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Puller The CM 640 Long Handle Puller features a heavyduty design for pulling, lifting, dragging, and stretching construction and industrial applications. Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Pull to Lift Rated Load Lever / / ² / ² 1 1-1/ / ² / ² 1 Load Capacity (US ton) Lift Pull to Lift Rated Load Lever / ³ ³ 1 1-1/ / ³ / ³ 1 Usually ships in 1 to weeks Bandit The Bandit Lever Operated Hoist s portable design, easy free chaining, and 60 rotating handle make it one of the most versatile hoists. Rugged, yet light weight, design and construction can be easily transported and used in even the most confining spaces 60 rotating handle allows for versatile rigging options when working in tight spaces Load Capacity (US ton) Lift Pull to Lift Rated Load Lever / ¹ 1 / / ¹ / ¹ / ¹ / ¹ 1 1-1/ / ¹ / ¹ / ¹ 1 1 Usually ships in to 4 days HMI-certified Meets ASME B0.1 Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions NI4 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

43 NEW s Hand Chain Hoists Series 6 The Series 6 Hand Chain Hoist features a simple, efficient and economical design for easy installation and use. Equipped with hardened load chain for flexibility and long wear Compact design, low head room and light weight steel construction for easy installation, even in confined spaces Hand wheel cover with guide slots minimizes jamming and slipping Forged swivel hooks with latches reduce twisting of chain and unintentional unhooking of load when chain is slack Standard hand chain drop is feet less than lift Do not exceed working load limit, load rating capacitycity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Required Hand Chain to Lift Capacity Pull to Lift Rated Load / ³ ³ ³ 1 Usually ships in 1 to weeks Hurricane 60 For the ultimate flexibility in a hand chain hoist, the CM Hurricane 60 is the choice for a wide range of applications. The patented hand chain cover rotates a full 60 to allow loads to be lifted, pulled or positioned from virtually any angle. In addition to providing maximum versatility, this unit offers a convenient way to maneuver loads without standing under the load. The Hurricane 60 provides a tool for addressing unique jobs in a broad range of environments. Meets ASME B0.16 and European CE Standard The Hurricane 60 is ideal when working: In tight spaces where the rigid handle of a lever hoist would be difficult to maneuver and operate Above the load being lifted On a drifting application where the hand chain angle adjusts throughout the operation With large loads to allow the operator to be a safe distance away. Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Required Hand Chain to Lift Capacity Pull to Lift Rated Load ³ 1 1/ ³ ³ ³ 1 Usually ships in 1 to weeks Cyclone The CM Cyclone Hand Chain Hoist features superior engineering, efficiency, and durability and is considered one of the most popular hand chain hoists ever designed. Inspected to meet or exceed HMI and ASME/ANSI performance and safety standards Standard hand chain drop is feet less than lift Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Required Hand Chain to Lift Capacity Pull to Lift Rated Load 10-1/ ³ 1 1/4 15-1/ ³ / ³ 1 1/ 15-1/ ³ ³ ³ 1 Usually ships in 1 to weeks USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI4

44 NEW s Tool Box Slings Grade 80 7/" Grade 80 Chain comes with master grablink, sling ID tag and two eye sling hooks Tool box size light weight and portable Adjustable general-purpose utility sling Lifts uneven loads easily Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Chain 7/ Reach ,100 1,800 1,450 1, ,100 1,800 1,450 1, NI44 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

45 NEW s Heavy Duty Hoist Rings Material: Forged high strength 4140 alloy steel Range of Movement: Swivel 60, Pivot 180 under load Design Factor: Minimum of 5:1 Meets manufacturing and design requirements of ASME-B0.6 and MIL-STD 09 Magnetic particle inspected per ASTM 1444 Black oxide coated Each individually serial numbered Use Hoist Rings for added lifting safety to avoid eyebolt twisting, bending and breaking when lifting heavy, angular, unbalanced loads Pivot 180 Swivel 60 Fractional Thread Working Load Limit Recommended Installation Torque (Ft. Lb.) A B C D E F K L M /8-16 1, ¹ 1 1, , ¹ 1 1/-1, ¹ 1, /8-11 4, /4-10 5, , ¹ , , ¹ 1 1 Usually ships in to 4 days Metric Thread Working Load Limit (kg) Recommended Installation Torque (Nm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) K (mm) L (mm) M (mm) M8x ¹ 1 M10x ¹ M1x1.75 1, M16x.0 1, , *¹ 1 M0x.5, , ¹ 1 M4x.0 4, M6x4.0 11,000 1, ¹ 1 *Long bar model 1 Usually ships in to 4 days USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI45

46 NEW s Stainless Steel Safety Engineered Hoist Rings Material: 00 Series stainless steel Design Factor: 5:1 Range of Movement: Swivel 60, Pivot 180 under load NDT: Liquid penetrant tested per ASTM-E 1417 Purification Process: Clean and passivate per ASTM-A967 Typical Applications: Use stainless for corrosive, cryogenic or elevated temperature environments All dimensions approximate variations do not affect use or design factor Each individually serial numbered Use Hoist Rings for added lifting safety to avoid eyebolt twisting, bending and breaking when lifting heavy, angular, unbalanced loads Fractional Thread Working Load Limit Recommended Installation Torque (Ft. Lb.) Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. H Dim. J Dim. K Dim. L Dim. M 1/ / ¹ 1 5/ / ¹ / ¹ 1 / / ¹ 1 1/-1 1, / ¹ 1 1, / ¹ 1 5/8-11, / ¹ 1, / ¹ 1 /4-10, / ¹ 1, ¹ 1 1 Usually ships in to 4 days Metric Thread Working Load Limit (kg) Recommended Installation Torque (Nm) Dim. A (mm) Dim. B (mm) Dim. C (mm) Dim. D (mm) Dim. E (mm) M10x ¹ 1 M1x ¹ 1 M16x , *¹ 1 M0x.5 1, ¹ 1 M4x.0, ¹ 1 *Long bar model 1 Usually ships in to 4 days Dim. F (mm) Dim. H (mm) Dim. J (mm) Dim. K (mm) Dim. L (mm) Dim. M (mm) NI46 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

47 NEW s Flip-Flop Hoist Rings Forged chrome moly steel Heat treated Black oxide finish Pivot 180 under load 6:1 design factor High strength screws are 100% Magnaflux inspected Rings and bodies are Magnafluxed per ASTM 1444 Use Hoist Rings for added lifting safety to avoid eyebolt twisting, bending and breaking when lifting heavy, angular, unbalanced loads Thread Screw of Screws Working Load Limit Recommended Installation Torque (Ft. Lb.) Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. H Dim. R Replacement Screws 5/ /4, /4 1 5/16-1/ /4 0 1/ *¹ 1 / /4, / -1/4 1-1/8 /8 -/16 7/8 0 5/ *¹ 1 1/-1 5, /8 1-1/ 1/ -7/8 1-1/8 0 / *¹ 1 1/-1-1/4 4 1, /8 1-5/8 /4 5-1/4 1-/8 1-1/4 7/ *¹ 1 5/8-11 -/4 4 0, /8-1/ /16 1-7/8 1-1/ *¹ 1 *Mounting screws included 1 Usually ships in to 4 days USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI47

48 NEW s Tuff-Edge Web Slings Blue polymer edge yarns are x more cut resistant for extended sling life Silver color treatment on body for x better abrasion resistance Tuff-Tag for permanent identification required by OSHA Proven sling web construction with red core warning yarns Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4 1,600 1,80, ,600 1,80, ,600 1,80, ,600 1,80, ² 1 1 1,600 1,80, ² 1 4,00,500 6, ,00,500 6, ,00,500 6, ,00,500 6, ² 1 1,00,500 6, ² 1 4 4,800,800 9, ² 1 6 4,800,800 9, ² 1 8 4,800,800 9, ² ,800,800 9, ² 1 1 4,800,800 9, ² 1 4 6,400 5,000 1, ² 1 6 6,400 5,000 1, ² 1 8 6,400 5,000 1, ² ,400 5,000 1, ² 1 1 6,400 5,000 1, ² 1 LiftAll Web Sling Comparison Style Use Material Identification Features Tuff-Edge Rugged Polyester Blue edge Blue center stripe Silver surface Daily use under good-torugged lifting conditions x edge cut resistance Webmaster Daily Polyester Blue center stripe Daily use under good-tomoderate lifting conditions 1600 Polyester stretches less for better load control, reduced abrasion Nylon No center stripe Daily use under good-tomoderate lifting conditions Nylon stretches more to help avoid shock loading Webmaster Occasional Polyester Blue center stripe 100 Black yarn on one edge Nylon No center stripe Black yarn on one edge Less frequent use under good lifting conditions Polyester stretches less for better load control, reduced abrasion Less frequent use under good lifting conditions Nylon stretches more to help avoid shock loading Two Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4,00,500 6, ,00,500 6, ,00,500 6, ,00,500 6, ² 1 1,00,500 6, ² 1 4 6,400 5,000 1, ,400 5,000 1, ,400 5,000 1, ,400 5,000 1, ² 1 1 6,400 5,000 1, ² 1 4 8,800 7,040 17, ² 1 6 8,800 7,040 17, ,800 7,040 17, ,800 7,040 17, ² 1 1 8,800 7,040 17, ² ,500 9,00, ² ,500 9,00, ,500 9,00, ,500 9,00, ² ,500 9,00, ² 1 NI48 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

49 NEW s Tuff-Edge Web Slings Blue polymer edge yarns are x more cut resistant for extended sling life Silver color treatment on body for x better abrasion resistance Tuff-Tag for permanent identification required by OSHA Proven sling web construction with red core warning yarns Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. One Ply Endless (Type 5) Vertical Choker Basket 4,00,500 6, ,00,500 6, ,00,500 6, ,00,500 6, ² 1 1,00,500 6, ² 1 4 6,400 5,000 1, ,400 5,000 1, ,400 5,000 1, ² ,400 5,000 1, ² 1 1 6,400 5,000 1, ² 1 4 8,800 7,040 17, ² 1 6 8,800 7,040 17, ² 1 8 8,800 7,040 17, ² ,800 7,040 17, ² 1 1 8,800 7,040 17, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² 1 Sling Use Configurations Vertical Choker Basket Two Ply Endless (Type 5) 1 4 Vertical Choker Basket 4 6,00 4,900 1, ² 1 6 6,00 4,900 1, ² 1 8 6,00 4,900 1, ² ,00 4,900 1, ² 1 1 6,00 4,900 1, ² 1 4 1,400 9,900 4, ² 1 6 1,400 9,900 4, ² 1 8 1,400 9,900 4, ² ,400 9,900 4, ² 1 1 1,400 9,900 4, ² ,00 1,000, ² ,00 1,000, ² ,00 1,000, ² ,00 1,000, ² ,00 1,000, ² 1 4 0,700 16,500 41, ² 1 6 0,700 16,500 41, ² 1 8 0,700 16,500 41, ² ,700 16,500 41, ² 1 1 0,700 16,500 41, ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI49

50 NEW s Webmaster 1600 Polyester Web Slings The industrial standard in web slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4 1,600 1,80, ,600 1,80, ,600 1,80, ,600 1,80, ² 1 1 1,600 1,80, ² 1 4,00,500 6, ,00,500 6, ,00,500 6, ,00,500 6, ² 1 1,00,500 6, ² 1 4 4,800,800 9, ² 1 6 4,800,800 9, ² 1 8 4,800,800 9, ² ,800,800 9, ² 1 1 4,800,800 9, ² 1 4 6,400 5,000 1, ² 1 6 6,400 5,000 1, ² 1 8 6,400 5,000 1, ² ,400 5,000 1, ² 1 1 6,400 5,000 1, ² 1 Choker Hitch Angles Adjusted Choker Hitch Capacity = Choker Hitch Capacity x Reduction Factor Synthetic Slings Angle of Choke > or = < Reduction Factor Angle of Choke Two Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4,00,500 6, ,00,500 6, ,00,500 6, ,00,500 6, ² 1 1,00,500 6, ² 1 4 6,400 5,000 1, ,400 5,000 1, ,400 5,000 1, ,400 5,000 1, ² 1 1 6,400 5,000 1, ² 1 4 8,800 7,040 17, ² 1 6 8,800 7,040 17, ² 1 8 8,800 7,040 17, ² ,800 7,040 17, ² 1 1 8,800 7,040 17, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² 1 NI50 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

51 NEW s Webmaster 1600 Polyester Web Slings The industrial standard in web slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. One Ply Endless (Type 5) 1 4 Vertical Choker Basket 4,00,500 6, ,00,500 6, ,00,500 6, ² 1 10,00,500 6, ² 1 1,00,500 6, ² 1 4 6,400 5,000 1, ² 1 6 6,400 5,000 1, ,400 5,000 1, ² ,400 5,000 1, ² 1 1 6,400 5,000 1, ² 1 4 8,800 7,040 17, ² 1 6 8,800 7,040 17, ² 1 8 8,800 7,040 17, ² ,800 7,040 17, ² 1 1 8,800 7,040 17, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² ,500 9,00, ² 1 Two Ply Endless (Type 5) 1 4 Vertical Choker Basket 4 6,00 4,900 1, ² 1 6 6,00 4,900 1, ² 1 8 6,00 4,900 1, ² ,00 4,900 1, ² 1 1 6,00 4,900 1, ² 1 4 1,400 9,900 4, ² 1 6 1,400 9,900 4, ² 1 8 1,400 9,900 4, ² ,400 9,900 4, ² 1 1 1,400 9,900 4, ² ,00 1,000, ² ,00 1,000, ² ,00 1,000, ² ,00 1,000, ² ,00 1,000, ² 1 4 0,700 16,500 41, ² 1 6 0,700 16,500 41, ² 1 8 0,700 16,500 41, ² ,700 16,500 41, ² 1 1 0,700 16,500 41, ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI51

52 NEW s Webmaster 1600 Nylon Web Slings The industrial standard in web slings Red core warning yarns aid inspection process Nylon web stretches more, helps avoid shock loading Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) Vertical Choker Basket 1,600 1,80, ,600 1,80, ,600 1,80, ,600 1,80, ,00,500 6, ,00,500 6, ,00,500 6, ,00,500 6, ,400 5,000 1, One Ply Twisted Eye (Type 4) Vertical Choker Basket 8,00,500 6, Two Ply Flat Eye (Type ) Vertical Choker Basket 6,400 5,000 1, ,400 5,000 1, ,400 5,000 1, ,400 5,000 1, ,800 7,040 17, ,800 7,040 17, ,800 7,040 17, One Ply Triangle and Choker (Type 1) The forged alloy steel attachments on either end extend sling life by resisting wear Most commonly used as a choker hitch but can also be used in basket and vertical hitches Vertical Choker Basket 8,00,400 6, ,00,400 6, NI5 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

53 NEW s Webmaster 100 Polyester Web Slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Wider bearing surface per capacity helps protect load surface Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) 1 4 Two Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4,400 1,900 4, ² 1 6,400 1,900 4, ² 1 8,400 1,900 4, ² 1 10,400 1,900 4, ² 1 1,400 1,900 4, ² 1 4 4,800,800 9, ² 1 6 4,800,800 9, ² 1 8 4,800,800 9, ² ,800,800 9, ² 1 1 4,800,800 9, ² 1 4 6,600 5,80 1, ² 1 6 6,600 5,80 1, ² 1 8 6,600 5,80 1, ² ,600 5,80 1, ² 1 1 6,600 5,80 1, ² 1 4 8,600 6,900 17, ² 1 6 8,600 6,900 17, ² 1 8 8,600 6,900 17, ² ,600 6,900 17, ² 1 1 8,600 6,900 17, ² 1 Vertical Choker Basket 4 1,00 0,950, ² 1 6 1,00 0,950, ² 1 8 1,00 0,950, ² ,00 0,950, ² 1 1 1,00 0,950, ² 1 4,400 1,900 4, ² 1 6,400 1,900 4, ² 1 8,400 1,900 4, ² 1 10,400 1,900 4, ² 1 1,400 1,900 4, ² 1 4,600,900 7, ² 1 6,600,900 7, ² 1 8,600,900 7, ² 1 10,600,900 7, ² 1 1,600,900 7, ² 1 4 4,800,800 9, ² 1 6 4,800,800 9, ² 1 8 4,800,800 9, ² ,800,800 9, ² 1 1 4,800,800 9, ² 1 Effect of Angles Vertical Angle from Horizontal Basket Angle from Horizontal Angle from Horizontal Sling capacity decreases as the angle from the horizontal decreases. Adjusted Capacity = Capacity x Reduction Factor Reduction Factor USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI5

54 NEW s Webmaster 100 Polyester Web Slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Wider bearing surface per capacity helps protect load surface Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. One Ply Endless (Type 5) Vertical Choker Basket 4,400 1,900 4, ² 1 6,400 1,900 4, ² 1 1 8,400 1,900 4, ² 1 10,400 1,900 4, ² 1 1,400 1,900 4, ² 1 4 4,800,800 9, ² 1 6 4,800,800 9, ² 1 8 4,800,800 9, ² ,800,800 9, ² 1 1 4,800,800 9, ² 1 4 6,500 5,00 1, ² 1 6 6,500 5,00 1, ² 1 8 6,500 5,00 1, ² ,500 5,00 1, ² 1 1 6,500 5,00 1, ² 1 4 8,600 6,900 17, ² 1 6 8,600 6,900 17, ² ,600 6,900 17, ² ,600 6,900 17, ² 1 1 8,600 6,900 17, ² 1 Two Ply Endless (Type 5) 1 4 Vertical Choker Basket 4 6,00 4,900 1, ² 1 6 6,00 4,900 1, ² 1 8 6,00 4,900 1, ² ,00 4,900 1, ² 1 1 6,00 4,900 1, ² 1 4 9,600 7,700 19, ² 1 6 9,600 7,700 19, ² 1 8 9,600 7,700 19, ² ,600 7,700 19, ² 1 1 9,600 7,700 19, ² ,700 9,400, ² ,700 9,400, ² ,700 9,400, ² ,700 9,400, ² ,700 9,400, ² ,500 1,400 1, ² ,500 1,400 1, ² ,500 1,400 1, ² ,500 1,400 1, ² ,500 1,400 1, ² 1 NI54 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

55 NEW s Tuflex Roundslings Endless Tuflex Roundslings Eye and Eye Double wall cover for greater sling life Color-coded capacities for quick identification No strength loss from abrasion to cover Chokes tighter, releases easier than other slings Wear points can be shifted to extend sling life Easier to inspect than any other type of sling Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Color Rated Capacity: Vertical Rated Capacity: Choker Rated Capacity: Basket 4 Purple,600,100 5, Purple,600,100 5, Purple,600,100 5, Purple,600,100 5, Purple,600,100 5, ² 1 4 Green 5,00 4,00 10, Green 5,00 4,00 10, Green 5,00 4,00 10, Green 5,00 4,00 10, Green 5,00 4,00 10, ² 1 Yellow 8,400 6,700 16, Yellow 8,400 6,700 16, Yellow 8,400 6,700 16, Yellow 8,400 6,700 16, Yellow 8,400 6,700 16, Yellow 8,400 6,700 16, ² 1 4 Red 1,00 10,600 6, ² 1 6 Red 1,00 10,600 6, Red 1,00 10,600 6, Red 1,00 10,600 6, Red 1,00 10,600 6, ² 1 4 Blue 1,00 17,000 4, ² 1 6 Blue 1,00 17,000 4, ² 1 8 Blue 1,00 17,000 4, ² 1 10 Blue 1,00 17,000 4, ² 1 1 Blue 1,00 17,000 4, ² 1 Black, wear resistant jacket over entire body for greater sling life Color-coded eyes for quick identification of capacity No strength loss from abrasion to cover Chokes tighter, releases easier than other slings Easier to inspect than any other type of sling Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Color Rated Capacity: Vertical Rated Capacity: Choker Rated Capacity: Basket 4 Purple,600,100 5, ² 1 6 Purple,600,100 5, ² 1 8 Purple,600,100 5, ² 1 10 Purple,600,100 5, ² 1 1 Purple,600,100 5, ² 1 4 Green 5,00 4,00 10, ² 1 6 Green 5,00 4,00 10, ² 1 8 Green 5,00 4,00 10, ² 1 10 Green 5,00 4,00 10, ² 1 1 Green 5,00 4,00 10, ² 1 4 Yellow 8,400 6,700 16, ² 1 6 Yellow 8,400 6,700 16, ² 1 8 Yellow 8,400 6,700 16, ² 1 10 Yellow 8,400 6,700 16, ² 1 1 Yellow 8,400 6,700 16, ² 1 6 Red 1,00 10,600 6, ² 1 8 Red 1,00 10,600 6, ² 1 10 Red 1,00 10,600 6, ² 1 1 Red 1,00 10,600 6, ² 1 8 Blue 1,00 17,000 4, ² 1 10 Blue 1,00 17,000 4, ² 1 1 Blue 1,00 17,000 4, ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI55

56 NEW s Direct Connect Hooks Permaloc Wire Rope Slings Eye and Eye ² Direct Connect Hooks are the quickest and easiest way to add hooks to Tuflex roundslings and web slings at your job site. No tools or extra parts needed. Just match the color-coded hook to the same color Tuflex and you re ready to go. Rated capacities are the same for both the hook and the Tuflex. Both alloy steel hook and latch are forged for superior toughness Hook color matches Tuflex color for easy identification Four hook sizes to match Tuflex sizes Can be used with 1" and " web slings Color Purple, Green 5, Yellow 8, Red 1, ² 1 Wear Pads If the sling is not properly protected there is a high probability that synthetic slings in direct contact with load edges will be cut, resulting in sling failure and possibly death. Always use Wear Pads to protect your slings from damage and your workers from catastrophe. Helps to protect synthetic and metal slings, as well as the product being lifted Hook and loop fastener on one edge makes these pads easy to install and remove Basic flat style fits most applications Wear pads may not prevent cutting or other sling damage. To avoid severe personal injury or death, keep all personnel clear of loads about to be lifted and suspended loads. Thickness Material Color 4 1 5/16 Synthetic Felt (Pukka) White /16 Synthetic Felt (Pukka) White /16 Synthetic Felt (Pukka) White ² 1 6x19, EIP, IWRC quality domestic wire rope Mechanically swaged, flemish eye splice Tuff-Tag shows OSHA required rated capacities Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Dia. Rated Capacity: Vertical (US ton) Rated Capacity: Choker (US ton) Rated Capacity: Basket (US ton) / ² ² ² ² ² 1 / ² ² ² / ² ² 1 5/ ² ² ² ² ² 1 / ² ² ² ² ² ² ² ² 1 Choker Hitch Angles Adjusted Choker Hitch Capacity = Choker Hitch Capacity x Reduction Factor Wire Rope Slings Angle of Choke > or = < Reduction Factor Angle of Choke NI56 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

57 NEW s Permaloc Wire Rope Slings 6x9, EIP, IWRC quality domestic wire rope Mechanically swaged flemish eye splice Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Sliding Choker Dia. 1/4 /8 1/ 5/8 /4 Choker (US ton) ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² 1 Tuff-Tag shows OSHA required rated capacities Thimbled choke eye for secure, long-lasting choker assembly Two Leg Bridle Dia. 1/4 /8 1/ 5/8 /4 1 Rated Capacity: 60 (US ton) Rated Capacity: 45 (US ton) Rated Capacity: 0 (US ton) ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI57

58 NEW s Adjust-A-Link Chain Slings The most easily adjustable and versatile chain sling available. Alloy steel master control link for long life. Grade 100 alloy steel lifting chain. Adjust leg length one or multiple links at a time. Lift in single, double leg or basket hitch. Chain cannot be removed from the master control plate, assuring the capacity rating will not be compromised The most versatile style of chain sling Adjust one or multiple links at one time to keep load level Alloy steel master link Complies with OSHA proof-tested and certified Grade 100 chain Never exceed rated capacities. Chain must be seated at the base of adjusting slot of the Master Control Link. Chain Reach Grade / 6 100,700 4, ,700 4, / ,00 7, ,00 7, / ,800 15, ² ,800 15, ² 1 1/ ,000 0, ² ,000 0, ² 1 Roughneck Wire Mesh Slings Triangle and Choker Made with high tensile steel mesh and alloy steel end fittings, these slings are widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings. Great for use in metalworking shops Steel construction resists abrasion and cutting Good flexibility and low stretch reduce load damage Mesh width helps control and balance loads Each sling proof tested and certified Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. The choker fitting must not be positioned against a load edge or directly on the triangle fitting Vertical Choker Basket 4,00,00 4, ² 1 6,00,00 4, ² 1 8,00,00 4, ² 1 10,00,00 4, ² 1 1,00,00 4, ² 1 4,500,500 7, ² 1 6,500,500 7, ² 1 8,500,500 7, ² 1 10,500,500 7, ² 1 1,500,500 7, ² 1 4 4,800 4,800 9, ² 1 6 4,800 4,800 9, ² 1 8 4,800 4,800 9, ² ,800 4,800 9, ² 1 1 4,800 4,800 9, ² 1 4 7,00 7,00 14, ² 1 6 7,00 7,00 14, ² 1 8 7,00 7,00 14, ² ,00 7,00 14, ² 1 1 7,00 7,00 14, ² 1 4 9,600 9,600 19, ² 1 6 9,600 9,600 19, ² 1 8 9,600 9,600 19, ² ,600 9,600 19, ² 1 1 9,600 9,600 19, ² 1 4 1,000 1,000 4, ² 1 6 1,000 1,000 4, ² 1 8 1,000 1,000 4, ² ,000 1,000 4, ² 1 1 1,000 1,000 4, ² ,400 14,400 8, ² ,400 14,400 8, ² ,400 14,400 8, ² ,400 14,400 8, ² ,400 14,400 8, ² 1 NI58 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

59 NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single Hooks Both Ends Chain 9/ /8 1/ Usually ships in 1 to weeks Reach Configuration Hook Type 90 SGG Grab Hooks 4, ³ 1 SSG Sling Hook & Grab Hook 4, ³ 1 SSS Sling Hooks 4, ³ 1 4 SGG Grab Hooks 4, ³ 1 4 SSG Sling Hook & Grab Hook 4, ³ 1 4 SSS Sling Hooks 4, ³ 1 6 SGG Grab Hooks 4, ³ 1 6 SSG Sling Hook & Grab Hook 4, ³ 1 6 SSS Sling Hooks 4, ³ 1 8 SGG Grab Hooks 4, ³ 1 8 SSG Sling Hook & Grab Hook 4, ³ 1 8 SSS Sling Hooks 4, ³ 1 10 SGG Grab Hooks 4, ³ 1 10 SSG Sling Hook & Grab Hook 4, ³ 1 10 SSS Sling Hooks 4, ³ 1 SGG Grab Hooks 8, ³ 1 SSG Sling Hook & Grab Hook 8, ³ 1 SSS Sling Hooks 8, ³ 1 4 SGG Grab Hooks 8, ³ 1 4 SSG Sling Hook & Grab Hook 8, ³ 1 4 SSS Sling Hooks 8, ³ 1 6 SGG Grab Hooks 8, ³ 1 6 SSG Sling Hook & Grab Hook 8, ³ 1 6 SSS Sling Hooks 8, ³ 1 8 SGG Grab Hooks 8, ³ 1 8 SSG Sling Hook & Grab Hook 8, ³ 1 8 SSS Sling Hooks 8, ³ 1 10 SGG Grab Hooks 8, ³ 1 10 SSG Sling Hook & Grab Hook 8, ³ 1 10 SSS Sling Hooks 8, ³ 1 SGG Grab Hooks 15, ³ 1 SSG Sling Hook & Grab Hook 15, ³ 1 SSS Sling Hooks 15, ³ 1 4 SGG Grab Hooks 15, ³ 1 4 SSG Sling Hook & Grab Hook 15, ³ 1 4 SSS Sling Hooks 15, ³ 1 6 SGG Grab Hooks 15, ³ 1 6 SSG Sling Hook & Grab Hook 15, ³ 1 6 SSS Sling Hooks 15, ³ 1 8 SGG Grab Hooks 15, ³ 1 8 SSG Sling Hook & Grab Hook 15, ³ 1 8 SSS Sling Hooks 15, ³ 1 10 SGG Grab Hooks 15, ³ 1 10 SSG Sling Hook & Grab Hook 15, ³ 1 10 SSS Sling Hooks 15, ³ 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI59

60 NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single 1 Leg Chain 9/ /8 1/ Reach Configuration Hook Type 90 SOG Grab Hook 4, ³ 1 SOS Sling Hook 4, ³ 1 4 SOG Grab Hook 4, ³ 1 4 SOS Sling Hook 4, ³ 1 6 SOG Grab Hook 4, ³ 1 6 SOS Sling Hook 4, ³ 1 8 SOG Grab Hook 4, ³ 1 8 SOS Sling Hook 4, ³ 1 10 SOG Grab Hook 4, ³ 1 10 SOS Sling Hook 4, ³ 1 SOG Grab Hook 8, ³ 1 SOS Sling Hook 8, ³ 1 4 SOG Grab Hook 8, ³ 1 4 SOS Sling Hook 8, ³ 1 6 SOG Grab Hook 8, ³ 1 6 SOS Sling Hook 8, ³ 1 8 SOG Grab Hook 8, ³ 1 8 SOS Sling Hook 8, ³ 1 10 SOG Grab Hook 8, ³ 1 10 SOS Sling Hook 8, ³ 1 SOG Grab Hook 15, ³ 1 SOS Sling Hook 15, ³ 1 4 SOG Grab Hook 15, ³ 1 4 SOS Sling Hook 15, ³ 1 6 SOG Grab Hook 15, ³ 1 6 SOS Sling Hook 15, ³ 1 8 SOG Grab Hook 15, ³ 1 8 SOS Sling Hook 15, ³ 1 10 SOG Grab Hook 15, ³ 1 10 SOS Sling Hook 15, ³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook NI60 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

61 NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Double Legs Chain 9/ /8 1/ Reach Configuration Hook Type DOG Grab Hook 7,400 6,100 4, ³ 1 DOS Sling Hook 7,400 6,100 4, ³ 1 4 DOG Grab Hook 7,400 6,100 4, ³ 1 4 DOS Sling Hook 7,400 6,100 4, ³ 1 6 DOG Grab Hook 7,400 6,100 4, ³ 1 6 DOS Sling Hook 7,400 6,100 4, ³ 1 8 DOG Grab Hook 7,400 6,100 4, ³ 1 8 DOS Sling Hook 7,400 6,100 4, ³ 1 10 DOG Grab Hook 7,400 6,100 4, ³ 1 10 DOS Sling Hook 7,400 6,100 4, ³ 1 DOG Grab Hook 15,00 1,400 8, ³ 1 DOS Sling Hook 15,00 1,400 8, ³ 1 4 DOG Grab Hook 15,00 1,400 8, ³ 1 4 DOS Sling Hook 15,00 1,400 8, ³ 1 6 DOG Grab Hook 15,00 1,400 8, ³ 1 6 DOS Sling Hook 15,00 1,400 8, ³ 1 8 DOG Grab Hook 15,00 1,400 8, ³ 1 8 DOS Sling Hook 15,00 1,400 8, ³ 1 10 DOG Grab Hook 15,00 1,400 8, ³ 1 10 DOS Sling Hook 15,00 1,400 8, ³ 1 DOG Grab Hook 6,000 1,00 15, ³ 1 DOS Sling Hook 6,000 1,00 15, ³ 1 4 DOG Grab Hook 6,000 1,00 15, ³ 1 4 DOS Sling Hook 6,000 1,00 15, ³ 1 6 DOG Grab Hook 6,000 1,00 15, ³ 1 6 DOS Sling Hook 6,000 1,00 15, ³ 1 8 DOG Grab Hook 6,000 1,00 15, ³ 1 8 DOS Sling Hook 6,000 1,00 15, ³ 1 10 DOG Grab Hook 6,000 1,00 15, ³ 1 10 DOS Sling Hook 6,000 1,00 15, ³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI61

62 NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Triple Legs Chain 9/ /8 1/ Reach Configuration Hook Type Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. 0 TOG Grab Hook 11,00 9,100 6, ³ 1 TOS Sling Hook 11,00 9,100 6, ³ 1 4 TOG Grab Hook 11,00 9,100 6, ³ 1 4 TOS Sling Hook 11,00 9,100 6, ³ 1 6 TOG Grab Hook 11,00 9,100 6, ³ 1 6 TOS Sling Hook 11,00 9,100 6, ³ 1 8 TOG Grab Hook 11,00 9,100 6, ³ 1 8 TOS Sling Hook 11,00 9,100 6, ³ 1 10 TOG Grab Hook 11,00 9,100 6, ³ 1 10 TOS Sling Hook 11,00 9,100 6, ³ 1 TOG Grab Hook,900 18,700 1, ³ 1 TOS Sling Hook,900 18,700 1, ³ 1 4 TOG Grab Hook,900 18,700 1, ³ 1 4 TOS Sling Hook,900 18,700 1, ³ 1 6 TOG Grab Hook,900 18,700 1, ³ 1 6 TOS Sling Hook,900 18,700 1, ³ 1 8 TOG Grab Hook,900 18,700 1, ³ 1 8 TOS Sling Hook,900 18,700 1, ³ 1 10 TOG Grab Hook,900 18,700 1, ³ 1 10 TOS Sling Hook,900 18,700 1, ³ 1 TOG Grab Hook 9,000 1,800, ³ 1 TOS Sling Hook 9,000 1,800, ³ 1 4 TOG Grab Hook 9,000 1,800, ³ 1 4 TOS Sling Hook 9,000 1,800, ³ 1 6 TOG Grab Hook 9,000 1,800, ³ 1 6 TOS Sling Hook 9,000 1,800, ³ 1 8 TOG Grab Hook 9,000 1,800, ³ 1 8 TOS Sling Hook 9,000 1,800, ³ 1 10 TOG Grab Hook 9,000 1,800, ³ 1 10 TOS Sling Hook 9,000 1,800, ³ 1 NI6 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

63 NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Quad 4 Legs Chain 9/ /8 1/ Reach Configuration Hook Type Rated Capacity: 60 Rated Capacity: 45 Rated Capacity: 0 QOG Grab Hook 11,00 9,100 6, ³ 1 QOS Sling Hook 11,00 9,100 6, ³ 1 4 QOG Grab Hook 11,00 9,100 6, ³ 1 4 QOS Sling Hook 11,00 9,100 6, ³ 1 6 QOG Grab Hook 11,00 9,100 6, ³ 1 6 QOS Sling Hook 11,00 9,100 6, ³ 1 8 QOG Grab Hook 11,00 9,100 6, ³ 1 8 QOS Sling Hook 11,00 9,100 6, ³ 1 10 QOG Grab Hook 11,00 9,100 6, ³ 1 10 QOS Sling Hook 11,00 9,100 6, ³ 1 QOG Grab Hook,900 18,700 1, ³ 1 QOS Sling Hook,900 18,700 1, ³ 1 4 QOG Grab Hook,900 18,700 1, ³ 1 4 QOS Sling Hook,900 18,700 1, ³ 1 6 QOG Grab Hook,900 18,700 1, ³ 1 6 QOS Sling Hook,900 18,700 1, ³ 1 8 QOG Grab Hook,900 18,700 1, ³ 1 8 QOS Sling Hook,900 18,700 1, ³ 1 10 QOG Grab Hook,900 18,700 1, ³ 1 10 QOS Sling Hook,900 18,700 1, ³ 1 QOG Grab Hook 9,000 1,800, ³ 1 QOS Sling Hook 9,000 1,800, ³ 1 4 QOG Grab Hook 9,000 1,800, ³ 1 4 QOS Sling Hook 9,000 1,800, ³ 1 6 QOG Grab Hook 9,000 1,800, ³ 1 6 QOS Sling Hook 9,000 1,800, ³ 1 8 QOG Grab Hook 9,000 1,800, ³ 1 8 QOS Sling Hook 9,000 1,800, ³ 1 10 QOG Grab Hook 9,000 1,800, ³ 1 10 QOS Sling Hook 9,000 1,800, ³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI6

64 NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single Oblong Links Both Ends Chain 9/ /8 1/ Reach Usually ships in 1 to weeks Configuration 90 CO, ³ 1 4 CO, ³ 1 6 CO, ³ 1 8 CO, ³ 1 10 CO, ³ 1 CO 7, ³ 1 4 CO 7, ³ 1 6 CO 7, ³ 1 8 CO 7, ³ 1 10 CO 7, ³ 1 CO 1, ³ 1 4 CO 1, ³ 1 6 CO 1, ³ 1 8 CO 1, ³ 1 10 CO 1, ³ 1 Single 1 Leg Chain 9/ /8 1/ Usually ships in 1 to weeks Reach Configuration Hook Type 90 SOG Grab Hook, ³ 1 SOS Sling Hook, ³ 1 4 SOG Grab Hook, ³ 1 4 SOS Sling Hook, ³ 1 6 SOG Grab Hook, ³ 1 6 SOS Sling Hook, ³ 1 8 SOG Grab Hook, ³ 1 8 SOS Sling Hook, ³ 1 10 SOG Grab Hook, ³ 1 10 SOS Sling Hook, ³ 1 SOG Grab Hook 7, ³ 1 SOS Sling Hook 7, ³ 1 4 SOG Grab Hook 7, ³ 1 4 SOS Sling Hook 7, ³ 1 6 SOG Grab Hook 7, ³ 1 6 SOS Sling Hook 7, ³ 1 8 SOG Grab Hook 7, ³ 1 8 SOS Sling Hook 7, ³ 1 10 SOG Grab Hook 7, ³ 1 10 SOS Sling Hook 7, ³ 1 SOG Grab Hook 1, ³ 1 SOS Sling Hook 1, ³ 1 4 SOG Grab Hook 1, ³ 1 4 SOS Sling Hook 1, ³ 1 6 SOG Grab Hook 1, ³ 1 6 SOS Sling Hook 1, ³ 1 8 SOG Grab Hook 1, ³ 1 8 SOS Sling Hook 1, ³ 1 10 SOG Grab Hook 1, ³ 1 10 SOS Sling Hook 1, ³ 1 NI64 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

65 NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single Hooks Both Ends Chain 9/ /8 1/ Reach Configuration Hook Type 90 SGG Grab Hooks, ³ 1 SSG Sling Hook & Grab Hook, ³ 1 SSS Sling Hooks, ³ 1 4 SGG Grab Hooks, ³ 1 4 SSG Sling Hook & Grab Hook, ³ 1 4 SSS Sling Hooks, ³ 1 6 SGG Grab Hooks, ³ 1 6 SSG Sling Hook & Grab Hook, ³ 1 6 SSS Sling Hooks, ³ 1 8 SGG Grab Hooks, ³ 1 8 SSG Sling Hook & Grab Hook, ³ 1 8 SSS Sling Hooks, ³ 1 10 SGG Grab Hooks, ³ 1 10 SSG Sling Hook & Grab Hook, ³ 1 10 SSS Sling Hooks, ³ 1 SGG Grab Hooks 7, ³ 1 SSG Sling Hook & Grab Hook 7, ³ 1 SSS Sling Hooks 7, ³ 1 4 SGG Grab Hooks 7, ³ 1 4 SSG Sling Hook & Grab Hook 7, ³ 1 4 SSS Sling Hooks 7, ³ 1 6 SGG Grab Hooks 7, ³ 1 6 SSG Sling Hook & Grab Hook 7, ³ 1 6 SSS Sling Hooks 7, ³ 1 8 SGG Grab Hooks 7, ³ 1 8 SSG Sling Hook & Grab Hook 7, ³ 1 8 SSS Sling Hooks 7, ³ 1 10 SGG Grab Hooks 7, ³ 1 10 SSG Sling Hook & Grab Hook 7, ³ 1 10 SSS Sling Hooks 7, ³ 1 SGG Grab Hooks 1, ³ 1 SSG Sling Hook & Grab Hook 1, ³ 1 SSS Sling Hooks 1, ³ 1 4 SGG Grab Hooks 1, ³ 1 4 SSG Sling Hook & Grab Hook 1, ³ 1 4 SSS Sling Hooks 1, ³ 1 6 SGG Grab Hooks 1, ³ 1 6 SSG Sling Hook & Grab Hook 1, ³ 1 6 SSS Sling Hooks 1, ³ 1 8 SGG Grab Hooks 1, ³ 1 8 SSG Sling Hook & Grab Hook 1, ³ 1 8 SSS Sling Hooks 1, ³ 1 10 SGG Grab Hooks 1, ³ 1 10 SSG Sling Hook & Grab Hook 1, ³ 1 10 SSS Sling Hooks 1, ³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI65

66 NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Double Legs Chain 9/ /8 1/ Reach Configuration Hook Type DOG Grab Hook 6,100 4,900, ³ 1 DOS Sling Hook 6,100 4,900, ³ 1 4 DOG Grab Hook 6,100 4,900, ³ 1 4 DOS Sling Hook 6,100 4,900, ³ 1 6 DOG Grab Hook 6,100 4,900, ³ 1 6 DOS Sling Hook 6,100 4,900, ³ 1 8 DOG Grab Hook 6,100 4,900, ³ 1 8 DOS Sling Hook 6,100 4,900, ³ 1 10 DOG Grab Hook 6,100 4,900, ³ 1 10 DOS Sling Hook 6,100 4,900, ³ 1 DOG Grab Hook 1,00 10,000 7, ³ 1 DOS Sling Hook 1,00 10,000 7, ³ 1 4 DOG Grab Hook 1,00 10,000 7, ³ 1 4 DOS Sling Hook 1,00 10,000 7, ³ 1 6 DOG Grab Hook 1,00 10,000 7, ³ 1 6 DOS Sling Hook 1,00 10,000 7, ³ 1 8 DOG Grab Hook 1,00 10,000 7, ³ 1 8 DOS Sling Hook 1,00 10,000 7, ³ 1 10 DOG Grab Hook 1,00 10,000 7, ³ 1 10 DOS Sling Hook 1,00 10,000 7, ³ 1 DOG Grab Hook 0,800 17,000 1, ³ 1 DOS Sling Hook 0,800 17,000 1, ³ 1 4 DOG Grab Hook 0,800 17,000 1, ³ 1 4 DOS Sling Hook 0,800 17,000 1, ³ 1 6 DOG Grab Hook 0,800 17,000 1, ³ 1 6 DOS Sling Hook 0,800 17,000 1, ³ 1 8 DOG Grab Hook 0,800 17,000 1, ³ 1 8 DOS Sling Hook 0,800 17,000 1, ³ 1 10 DOG Grab Hook 0,800 17,000 1, ³ 1 10 DOS Sling Hook 0,800 17,000 1, ³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook NI66 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

67 NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Triple Legs Chain 9/ /8 1/ Reach Configuration Hook Type Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. 0 TOG Grab Hook 9,100 7,400 5, ³ 1 TOS Sling Hook 9,100 7,400 5, ³ 1 4 TOG Grab Hook 9,100 7,400 5, ³ 1 4 TOS Sling Hook 9,100 7,400 5, ³ 1 6 TOG Grab Hook 9,100 7,400 5, ³ 1 6 TOS Sling Hook 9,100 7,400 5, ³ 1 8 TOG Grab Hook 9,100 7,400 5, ³ 1 8 TOS Sling Hook 9,100 7,400 5, ³ 1 10 TOG Grab Hook 9,100 7,400 5, ³ 1 10 TOS Sling Hook 9,100 7,400 5, ³ 1 TOG Grab Hook 18,400 15,100 10, ³ 1 TOS Sling Hook 18,400 15,100 10, ³ 1 4 TOG Grab Hook 18,400 15,100 10, ³ 1 4 TOS Sling Hook 18,400 15,100 10, ³ 1 6 TOG Grab Hook 18,400 15,100 10, ³ 1 6 TOS Sling Hook 18,400 15,100 10, ³ 1 8 TOG Grab Hook 18,400 15,100 10, ³ 1 8 TOS Sling Hook 18,400 15,100 10, ³ 1 10 TOG Grab Hook 18,400 15,100 10, ³ 1 10 TOS Sling Hook 18,400 15,100 10, ³ 1 TOG Grab Hook 1,00 5,500 18, ³ 1 TOS Sling Hook 1,00 5,500 18, ³ 1 4 TOG Grab Hook 1,00 5,500 18, ³ 1 4 TOS Sling Hook 1,00 5,500 18, ³ 1 6 TOG Grab Hook 1,00 5,500 18, ³ 1 6 TOS Sling Hook 1,00 5,500 18, ³ 1 8 TOG Grab Hook 1,00 5,500 18, ³ 1 8 TOS Sling Hook 1,00 5,500 18, ³ 1 10 TOG Grab Hook 1,00 5,500 18, ³ 1 10 TOS Sling Hook 1,00 5,500 18, ³ 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI67

68 NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Quad 4 Legs Chain 9/ /8 1/ Reach Configuration Hook Type Rated Capacity: 60 Rated Capacity: 45 Rated Capacity: 0 QOG Grab Hook 9,100 7,400 5, ³ 1 QOS Sling Hook 9,100 7,400 5, ³ 1 4 QOG Grab Hook 9,100 7,400 5, ³ 1 4 QOS Sling Hook 9,100 7,400 5, ³ 1 6 QOG Grab Hook 9,100 7,400 5, ³ 1 6 QOS Sling Hook 9,100 7,400 5, ³ 1 8 QOG Grab Hook 9,100 7,400 5, ³ 1 8 QOS Sling Hook 9,100 7,400 5, ³ 1 10 QOG Grab Hook 9,100 7,400 5, ³ 1 10 QOS Sling Hook 9,100 7,400 5, ³ 1 QOG Grab Hook 18,400 15,100 10, ³ 1 QOS Sling Hook 18,400 15,100 10, ³ 1 4 QOG Grab Hook 18,400 15,100 10, ³ 1 4 QOS Sling Hook 18,400 15,100 10, ³ 1 6 QOG Grab Hook 18,400 15,100 10, ³ 1 6 QOS Sling Hook 18,400 15,100 10, ³ 1 8 QOG Grab Hook 18,400 15,100 10, ³ 1 8 QOS Sling Hook 18,400 15,100 10, ³ 1 10 QOG Grab Hook 18,400 15,100 10, ³ 1 10 QOS Sling Hook 18,400 15,100 10, ³ 1 QOG Grab Hook 1,00 5,500 18, ³ 1 QOS Sling Hook 1,00 5,500 18, ³ 1 4 QOG Grab Hook 1,00 5,500 18, ³ 1 4 QOS Sling Hook 1,00 5,500 18, ³ 1 6 QOG Grab Hook 1,00 5,500 18, ³ 1 6 QOS Sling Hook 1,00 5,500 18, ³ 1 8 QOG Grab Hook 1,00 5,500 18, ³ 1 8 QOS Sling Hook 1,00 5,500 18, ³ 1 10 QOG Grab Hook 1,00 5,500 18, ³ 1 10 QOS Sling Hook 1,00 5,500 18, ³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook NI68 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

69 NEW s Load Hugger Tiedown Assemblies Meet all DOT and CVSA requirements Flexible conforms to and controls the load Cam Style Ultimate Strength Hook Type ,000 0 S-Hook, Coated Ratchet Style Ultimate Strength Working Load Limit Hook Type 1 1, Hook & Keeper ,000 1,600 Flat Hook ,000 1,600 Flat Hook ,000 1,600 U-Hook ,000,00 Flat Hook , S-Hook, Coated , S-Hook, Coated USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI69

70 NEW s Load Hugger Tiedown Assemblies Meet all DOT and CVSA requirements Flexible conforms to and controls the load Ratchet Style Series 5, ² ² ² ² 14176² 14176² Ultimate Strength Hook Type 7 5,000 1,600 Flat Hook ,000 1,600 Flat Hook ² 1 7 5,000 1,600 Stamped Snap Hook ² 1 0 5,000 1,600 Stamped Snap Hook ² 1 7 5,000 1,600 U-Hook ,000 1,600 U-Hook ² 1 7 5,000 1,600 Endless 14176² 1 0 5,000 1,600 Endless 14176² 1 Ratchet Style Series 10, ² ² 14179² 14179² ² Ultimate Strength Hook Type 7 10,000,00 Flat Hook ,000,00 Flat Hook ,000,00 Stamped Snap Hook ² ,000,00 Stamped Snap Hook ² ,000,00 Endless 14179² ,000,00 Endless 14179² ,000,00 U-Hook ,000,00 U-Hook ² 1 NI70 USA: 888.YES.KENT ( ) Canada: kent-automotive.com

71 NEW s Load Hugger Tiedown Assemblies Winch Assemblies ² ² ² ² ² 14178² 14178² Meet all DOT and CVSA requirements Flexible conforms to and controls the load For use with weld-on or portable winches 4 Ultimate Strength Hook Type 7 15,000 5,000 Flat Hook ,000 5,000 Flat Hook ² ,000 5,000 Triangle ² ,000 5,000 Triangle ² ,000 5,000 Chain Grab Hook ² ,000 5,000 Chain Grab Hook ² ,000 5,000 Chain Anchor 14178² ,000 5,000 Chain Anchor 14178² 1 Winches Winch Bar 6" long, chrome-plated steel bar with knurled handle and tapered end Use on winches to tighten and release winch straps Meet all DOT and CVSA requirements 4" slot to accept web up to 4" wide Use winch bar to tighten and release Style ² Winch Tightening Bar Portable Weld-On ² 1 USA: 888.YES.KENT ( ) Canada: kent-automotive.com NI71

72 NEW s Load Hugger E-Track Assemblies Ratchet Style Tuff-Edge Meet all DOT and CVSA requirements Flexible conforms to and controls the load Secures products inside vans or trailers Color Ultimate Strength Working Load Limit 1 Yellow,000 1, Blue,000 1, Aids in removing vehicles stuck in snow, mud, sand and ditches. Made from strong durable sling webbing with attaching eyes on each end. The elastic effect of the webbing helps absorb shock and contraction aids in the vehicle recovery. Safer than chain or wire rope Shock absorbing to reduce chance of vehicle damage Light weight and flexible for easy use and storage Tuflex Aids in removing vehicles stuck in snow, mud, sand and ditches. Made from strong durable Tuflex roundslings. Body and attaching eyes are covered with additional abrasion resistant fabric for extra protection. The elastic effect of the polyester helps absorb shock and contraction aids in the vehicle recovery. Safer than chain or wire rope Shock absorbing to reduce chance of vehicle damage Light weight and flexible for easy use and storage Towing Capacity Assembly Breaking Strength Ply 5,00 16, , ² 1 8,000 4, ² 1 4, ² 1 10,600, ² 1, ² 1 16,000 48, ² 1 48, ² 1 10,700, ² 1, ,00 4, ² 1 4, ² 1 19,100 57, ² 1 57, ² 1 7,100 81, ² 1 81, ² 1 Towing Capacity 14,000 17,500,000 8,000 5,00 51,600 8,00 110, ,000 Assembly Breaking Strength Color 4,000 0 Yellow ² 1 4,000 0 Yellow ² 1 5,500 0 Tan ² 1 5,500 0 Tan ² 1 66,000 0 Red ² 1 66,000 0 Red ² 1 84,000 0 White ² 1 84,000 0 White ² 1 105,900 0 Blue ² 1 105,900 0 Blue ² 1 154,800 0 Grey ² 1 154,800 0 Grey ² 1 49,900 0 Brown ² 1 49,900 0 Brown ² 1 0,000 0 Olive ² 1 0,000 0 Olive ² 1 450,000 0 Black ² 1 450,000 0 Black ² 1 NI7 USA: 888.YES.KENT ( ) Canada: kent-automotive.com