ThyssenKrupp Elevator
|
|
|
- Georgia Hodges
- 5 years ago
- Views:
Transcription
1 84 Harrison Street San Francisco, CA 940 Tel: (4) Fax: (4) th Avenue South Kirkland, WA 980 Phone: (4) 880 Fax: (4) 8846 wwwthyssenkruppelevatorcom 7 BUSH ST, SAN FRANCISCO, CA 940 (4) Fax: (4) 444 rich@blaskacom
2 4 OFF 6 4 OFF 6 " US STARCRAFT, TYP " " 68" FACEPLATE 8" 8" 66" AFF " " " PUSH TO TALK Elevator Intercom NORMAL INTERCOM TO ELEVATOR CARS w/ SELECTOR SWITCH PHASE I KEY SWITCH " " " NORMAL PHASE I KEY SWITCH " " " PUSH TO TALK Elevator Intercom AFF " NORMAL INTERCOM TO ELEVATOR CARS w/ SELECTOR SWITCH PHASE I KEY SWITCH 8"Ø "UP" 8"Ø "UP" " 8"Ø "DOWN" 0" AFF " " " " " " " NOTE: CUSTOM HALL STATIONS PROVIDED FOR ELEVATORS # 6 AT ALL LANDINGS AND FOR ELEVATORS #8 & 9 AT MAIN LOBBY ONLY TKE STANDARD HALL STATIONS PROVIDED FOR ELEVATORS #8 & 9 PARKING LEVELS AND FOR ELEVATOR #7 AT ALL LANDINGS (SERVICE CAR) /8/009 US STARCRAFT GA (/8") CRS 4 GA CRS PAINTED BLACK MONITOR CONTROL /8"Ø ILLUM HALO HELVETICA, FILLED (SIZE & COLOR AS INDICATED) 0/8/009 /" = '0" 06 7th Avenue South Kirkland, WA Harrison Street San Francisco, CA 940 Tel: (4) Fax: (4) THE SUMMIT BUILDING LOBBY HALL STATIONS ELEVATORS # 6, 8 & 9 Phone: (4) 880 Fax: (4) 8846 wwwthyssenkruppelevatorcom
3 AFF 46 " FACEPLATE 0 " 7 8" " 0 " US STARCRAFT, TYP 66" AFF 0 7 8" 8"Ø "UP" 8"Ø "DOWN" " 9" 8"Ø "DOWN" 0" AFF " " " " /8/009 US STARCRAFT GA (/8") CRS 4 GA CRS PAINTED BLACK MONITOR CONTROL /8"Ø ILLUM HALO HELVETICA, FILLED (SIZE & COLOR AS INDICATED) 0/8/009 /" = '0" 06 7th Avenue South Kirkland, WA Harrison Street San Francisco, CA 940 Tel: (4) Fax: (4) THE SUMMIT BUILDING LOBBY HALL STATIONS ELEVATORS # 6, 8 & 9 Phone: (4) 880 Fax: (4) 8846 wwwthyssenkruppelevatorcom
4 9 6" 6 " 7 8 " 8" 8" 6" 4 " 7 8" " 4 " 4 " 4 " TYP 8 " 8 " 9 " TYP 7 6" 7 6" PUSH TO TALK OFF Elevator Intercom NORMAL 4 6 /8" HIGH HELVETICA WHITE BY US FIRE FLAME, ENGRAVED (& FILLED RED BY US MAN ON STAIR, ENGRAVED (& FILLED WHITE BY US /8" HIGH HELVETICA WHITE BY US 7 6" 7 6" (4) 6 x /8 WELD STUDS ON BACK OF FACEPLATE FOR INTERCOM MOUNTING 8 " TYP R 8" 6 " TYP 8 " TYP () /6 x /" SLOTS THROUGH FACEPLATE FOR SPEAKER & MICROPHONE SELECTOR SWITCH POSITIONS FOR ELEVATORS # 6 & #8 & 9, /8" HIGH HELVETICA ENGRAVED (& FILLED WHITE BY US /8"Ø PUNCH FOR SELECTOR SWITCH /8"Ø PUNCH FOR ILLUMINATING JEWEL /8" HIGH HELVETICA ENGRAVED (& FILLED WHITE BY US /Ø PUNCH FOR INTERCOM BUTTON /6" HIGH HELVETICA WHITE BY US w/ /6" HIGH HELVETICA RED BY US / HIGH HELVETICA RED BY US /6" HIGH HELVETICA RED BY US " FIRE SERVICE KEY SWITCH, /Ø RED BEZEL w/ WHITE LETTERING, KEY REMOVABLE IN "OFF" & "ON" POSITIONS, NOT REMOVABLE IN "BYPASS" POSITION, TYP ILLUMINATING "UP" & "DOWN" PUSH BUTTONS ARE MONITOR CONTROL DEVICES w/ /8"Ø ILLUMINATING LEXAN HALO & w/ /8"Ø STAINLESS STEEL #4 BUTTON CAP, ENGRAVED THRU & EPOXYFILLED DIRECTION ARROWS, ILLUMINATES TO INDICATE CALL PLACEMENT, TYP " " 6" US STARCRAFT 06 7th Avenue South Kirkland, WA 980 Phone: (4) 880 Fax: (4) 8846 wwwthyssenkruppelevatorcom HALL STATION EXPANDED AREA 84 Harrison Street San Francisco, CA 940 Tel: (4) Fax: (4) THE SUMMIT BUILDING EXPANDED VIEW /8" = "
5 68" FACEPLATE " 6" ANGLES " 6" STUD C " L, TYP 7" SOUTHCO SNAP CLOSER " CORD WELD STUD " x x 8" ANGLES, () REQ WELD STUDS, TYP SOUTHCO SNAP CLOSER CONCEALED FASTENERS, (4) REQ CLEAR POLYURETHANE TOPCOAT ON BACK OF GA CRS FOR RUST PREVENTION 4 GA CRS BACK OPERATING DEVICES, TYP FERRARI OR SELBY HINGES, () REQ CORD, VINYL COATED 4 GA CRS BACK "± MILL BACK SLOT FOR GRIP POINTS TO OPEN PANEL 68" BACK BOX " " HALL STATION BACK VIEW ELEVATION VERTICAL SECTION THRU FIXTURE 6" BOX & PLATE PLATE EDGE FINISHED SAME AS FACE " x x 8" ANGLES, () REQ 4 GA CRS BACK " 4 " " " 4 " " 7 8" " HORIZONTAL SECTION THRU FIXTURE 8 " PLATE 8" BOX " NOTES: MOUNTING METHOD SHALL BE VIA SCREW ATTACHMENT OF BOX BACK TO FINISH WALL STRUCTURE, AS NECESSARY PANEL IS CLOSED AND SECURED w/ INCONSPICUOUS HINGES AND SNAP CLOSURES MOUNTED TO THE BACKSIDE OF THE PANEL TO OPEN PANEL, USE SUCTION CUPS ON FRONT OF FACEPLATE OR PULL TOP EDGE OF PANEL w/ HOOKED PICK AT MILLED SLOT LOCATED ON THE BACK TOP EDGE OF PANEL SNAP CLOSURES DISENGAGE AS PANEL OPENS 06 7th Avenue South Kirkland, WA Harrison Street San Francisco, CA 940 Tel: (4) Fax: (4) Phone: (4) 880 Fax: (4) 8846 wwwthyssenkruppelevatorcom THE SUMMIT BUILDING BOX BACK, SIDE & TOP VIEWS AS NOTED 4 4
6 46 " FACEPLATE " 4 " ANGLES " 0 8" STUD C " L, TYP " SOUTHCO SNAP CLOSER " CORD WELD STUD " x x 8" ANGLES, () REQ WELD STUDS, TYP 4 GA CRS BACK SOUTHCO SNAP CLOSER CONCEALED FASTENERS, (4) REQ OPERATING DEVICES, TYP CLEAR POLYURETHANE TOPCOAT ON BACK OF GA CRS FOR RUST PREVENTION FERRARI OR SELBY HINGES, () REQ CORD, VINYL COATED 4 GA CRS BACK "± MILL BACK SLOT FOR GRIP POINTS TO OPEN PANEL 46 " BACK BOX " " HALL STATION BACK VIEW ELEVATION VERTICAL SECTION THRU FIXTURE 6" BOX & PLATE PLATE EDGE FINISHED SAME AS FACE " x x 8" ANGLES, () REQ 4 GA CRS BACK " 4 " " " 4 " " 7 8" " HORIZONTAL SECTION THRU FIXTURE 8 " PLATE 8" BOX " NOTES: MOUNTING METHOD SHALL BE VIA SCREW ATTACHMENT OF BOX BACK TO FINISH WALL STRUCTURE, AS NECESSARY PANEL IS CLOSED AND SECURED w/ INCONSPICUOUS HINGES AND SNAP CLOSURES MOUNTED TO THE BACKSIDE OF THE PANEL TO OPEN PANEL, USE SUCTION CUPS ON FRONT OF FACEPLATE OR PULL TOP EDGE OF PANEL w/ HOOKED PICK AT MILLED SLOT LOCATED ON THE BACK TOP EDGE OF PANEL SNAP CLOSURES DISENGAGE AS PANEL OPENS AS NOTED 06 7th Avenue South Kirkland, WA 980 THE SUMMIT BUILDING BOX BACK, SIDE & TOP VIEWS 84 Harrison Street San Francisco, CA 940 Tel: (4) Fax: (4) Phone: (4) 880 Fax: (4) 8846 wwwthyssenkruppelevatorcom
TYPICAL MDF DESIGN REQUIREMENTS
A70000 MEP COORDINATION NOTES: TYPICAL MDF DESIGN REQUIREMENTS : ALL ROOM RECEPTACLES SHALL BE FED FROM DEDICATED IT PANEL, AND TIED INTO EMERGENCY SYSTEM. RECEPTACLES (CONVENIENCE): () 0 AMP DUPLEX RECEPTACLE
4-393 Concealed Hinge Pr02 120
4-393 Concealed Hinge Pr02 120 Lift-off, for nested door, snap-in Concealed Hinge for nested door. Can be applied both at the top and at the bottom of the door. Small space requirement. simple clip-in
SYSTIMAX 360 FTP Evolve Panel Instructions
Instruction Sheet 860509975 SYSTIMAX Solutions SYSTIMAX 360 FTP Evolve Instructions General The SYSTIMAX 360 Evolve modular foiled twisted pair (FTP) patch panel is a highly flexible 24- or 48-port, front
2007 Dodge Caliber SE
REAR DOOR Fig. 69: REAR DOOR HINGE 1. With the help of an assistant, carefully remove nuts (1) from door studs. 2. Remove door (7) from vehicle. 3. Disconnect door harness (4). Fig. 70: REAR DOOR HINGE
Oiltight Switches & Pilot Devices
Oiltight Non-Illuminated ushbuttons (Sub-Assembled) Contact Block + Operator + Button = Completed Unit art Numbers: Operators Style art Number Momentary Maintained LW1B-M0 LW1B-A0 LW2B-M0 LW2B-A0 Mushroom
2006 Saturn Ion ACCESSORIES & EQUIPMENT Doors - Ion
POWER DOOR LOCK SWITCH REPLACEMENT Removal Procedure Fig. 28: View Of Power Door Lock Switch 1. Using a flat-bladed tool, pry the switch from the door trim panel enough to expose the locking tabs. 2. Press
STORE NUM.: 284 CROSS STREETS: San Pablo Ave & Monroe St. ADDRESS: 1075 Monroe St. Albany, CA
STORE NUM.: 284 CROSS STREETS: San Pablo Ave & Monroe St. ADDRESS: 1075 Monroe St. Albany, CA WALL SIGNS: Building Elevation NOTES: North South East West Area Allowed per Elevation Signs Allowed per Elevation
ARCHITECTURAL DOOR HARDWARE DOOR STOPS & HOLDERS THRESHOLDS & GASKETING CATALOG
ARCHITECTURAL DOOR HARDWARE DOOR STOPS & HOLDERS THRESHOLDS & GASKETING CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index DOOR STOPS
SUREClose. Hydraulic Gate Closers & Hinges. NEW External mount. Internal mount. Internal or External mount... the choice is yours.
SUREClose Hydraulic Closers & s NEW External mount closes gates up to 260 lbs Internal mount Internal or External mount... the choice is yours. www.ddtechglobal.com Externally Mounted SureClose is a hinge
DETENTION ACCESSORIES
DETENTION ACCESSORIES Engineered to last 20 years to life. Designed with Durability in Mind PDI s standard and custom specification detention accessories are the most the cost-effective solution for new
Close Hydraulic Gate Closers & Hinges NEW External mount Internal mount Internal or External mount... the choice is yours.
SUREClose Hydraulic Closers & s NEW External mount Internal mount Internal or External mount... the choice is yours. www.ddtechglobal.com SureClose is a hinge & closer, in one small, powerful package!
BDF-1000 Barn Door Hardware BDF-Series 1000
BARN DOOR HARDWARE BDF-1000 Barn Door Hardware BDF-Series 1000 Type: Top Mount Single Wheel Material: Metal Construction Finish: Matte Black (powder-coated), Satin Nickel Designed for Wood Doors: 1-3/8
table of Contents Warranty:
table of Contents placement of the Mounting Bolts spudnik swingout... 2 spudnik solid... 2 logan swingout... 3 logan solid... 3 double l swingout... 4 double l solid... 4 Mounting Framework... 5-6 Mounting
Approvals, see page 41. Detailed drawing, see page 1226/1227.
Ex enclosures Stainless steel F G B.7 With screw-fastened lid Material: Stainless steel.40 (AISI 04) Surface finish: Brushed, grain 40 Protection category: IP 66 to EN 60 9/09.00 Supply includes: Enclosure,
DEMAMaster TM DM-811 Series Installation Manual
R TM MADE IN USA I-807 Page 1 of 6 System Overview The DEMAMaster series is designed for long reliable use with simplicity in mind for both the installer and user. The DEMAMaster dispenses using the reliable
AC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
Luminaire Support Location Cable Mounting Kit. Non-Power Feed
INSTALLATION INSTRUCTIONS These installation instructions are used for installing the following luminaires and kits: Luminaire Support Location Cable Mounting Kit OLE4 (suspended) Normal Power Feed Non-Power
MICRO CUP HOLDERS
MICRO CUP HOLDERS 0 80 05 - Extremely reduced size and weight - Stainless steel stem and spring - Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS This document explains mounting for pendant, recessed, and wall PENDANT - STEP ONE INSTALL MOUNTING POINTS Non-power feed mounting points may be positioned 1 to 12 or 12 to 18
Number of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
235/245400, , 28N
Models 235/245400, 287000, 28N thru W, 310/312/313700 These carburetors have a fixed high speed main jet with adjustable idle, Fig 183. The different carburetors are identified as LMT 1 and up. The letters
Technical Data Sheet Excel 733-EG
Technical Data Sheet Excel 733-EG Excel 700 Series Features & Options Standard Features Electrically-operated continuously-hinged movable partition Driven with Ø5 mm [3/16"] steel cable STC 43 or 49 76
2/3 Port Mechanical Valve. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
2/3 Port Mechanical Valve Series 00 Large flow capacity. A variety of actuator types. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Mass (Basic)
D8 DZUS PANEX Quarter-Turn Fasteners
392 DZUS ANEX Quarter-Turn Fasteners Studs Size 4 Studs: Steel, zinc plated plus chromate or chrome plated Bail cover: ABS, black H Head Styles - Tool Actuated Oval Slot Hex Recess hillips Recess 1.3 (.051)
Material: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
AXEPZA PIZZA OVEN PARTS MANUAL SERIAL N FORWARD
AlfrescoTM AXEPZA PIZZA OVEN PARTS MANUAL SERIAL N -00000 FORWARD LAST SAVED BY:»» Adrian ««Monday, October, 0 0:: AM 0 BIXBY DRIVE CITY OF INDUSTRY, CA. CREATED: 0/0/0 :0AM PART MANUALS PARTS MANUAL 00-000
Stainless Steel Products
/1 Stainless Steel Products Group code Product name 016 Push to close 11 T handle heavy duty lock 060 Quarter turn with spring 066 Mini quarter turn with spring 064 Quarter turn with spring 02 Swing handle
(gd8) 5/8 x 18 x (2) machined
655 SOUTH LINCOLN AVE / SAN BERNARDINO CA. 92408 PHONE 877-470-2975 / FAX 909-890-0703 Web address: globalwest.net COR-5864 V / S / Q (1958 64) Impala rear coilover kit. This kit bolts on, welding is not
VMECA Vacuum Auto - Locking system
VMECA Vacuum Auto - Locking system www.vmeca.com Vacuum Auto Locking system Introduction In the automobile industries today, vacuum is widely used for a pick and place applications on automobile parts
Elevators & Conveyors
Elevators & Conveyors Commercial Series 1 Your Complete Systems Manufacturer. Series 1 GSI Chain Conveyors Our material handling division can provide you with an extensive line of chain conveyors to meet
Squeeze Action Plier Clamps
7.7 Series 460, 480 Product Overview Drop forged alloy steel components for exceptional strength Two way trigger release allows for fast and easy opening of clamp Welding 462 462-2 463 480 482 With Two
Hydraulic Gate Closers & Hinges. SUREClose.
Hydraulic Closers & s www.ddtechglobal.com/sureclose SureClose s and Closers are designed to replace conventional commercial gate hinges and closers through its unique design that hides the closer hydraulics
OPERATING INSTRUCTIONS FOR. Gold-Place TM. Manual Pick & Place with Dispenser System Model MPP-21
OPERATING INSTRUCTIONS FOR Gold-Place TM Manual Pick & Place with Dispenser System Model MPP-21 AUTOMATED PRODUCTION SYSTEMS, INC. 2840 Pine Road Huntingdon Valley PA 19006 Phone: (215) 938-1000 FAX: (215)
CATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION ML-44103, ML ML-44105, ML ML-26243
CATALOG OF REPLACEMENT PARTS W32/W32C/625A WRAP STATION W32 W32C 625A HP ML-44103, ML-26320 ML-44105, ML-26331 ML-44069 ML-26243 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001
U L T I M A T E R A D A R / L A S E R D E F E N S E S Y S T E M
S m a r t e r Q u i e t e r M o r e A c c u r a t e U L T I M A T E R A D A R / L A S E R D E F E N S E S Y S T E M Installation Manual PASSPORT 9500ci Comes Complete Front Radar Receiver Miniature weatherproof
D.fm Page 1 Wednesday, March 5, :21 PM Raptor user manual
Raptor user manual 1 mounting bracket 2 swivel lock 3 clamp hole 4 lamp access screws 5 air vents 2001-2002 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced,
G4 LED HID Retrofit. Standards Manual
G4 LED HID Retrofit Standards Manual G4 HID Retrofit Series MEGALUMEN 22, 27, 36, 45, 54, 80, 100, 120W Mills Lighting 4th Generation MegaLumen Lamp boasts 150 lumen per watt. Mills Lighting LED-HIDRL
Payment Drops. Quality... Secure. Direct to you. Thru Wall Models. Walk-Up Models. Drive-Up Models 2009 PRODUCT CATALOG
Secure Payment Drops DRIVE-UP WALK-UP ON-WALL THRU-WALL Thru Wall Models Thru-Wall pages 8-13 Models pages 6-10 Walk-Up Walk-Up Models Models pages 14-25 pages 11-21 Drive-Up Models Models Drive-Up pages
C35. Assembly Instructions. Mobius Floor Lamp & C Page 1 of 7. Prepare Base (Figures 1& 2)
Mobius Floor Lamp 23-4505 & 23-4505C Page 1 of 7 Prepare Base (Figures 1& 2) A 8-32 Screw (2) B Wireway Cover Plate C Base D Lower Pipe Assembly E Threaded Stud (4) F Hex Nut (4) 1. Carefully unpack the
655 South Lincoln Avenue / San Bernardino CA Phone / Fax / Web address: globalwest.net
655 South Lincoln Avenue / San Bernardino CA. 92408 Phone 877-470-2975 / Fax 909-890-0703 / Web address: globalwest.net Part # TBC-9 or TBC-10 --- 1963-82 Corvette Rear swing arm installation instructions:
DC-RU DIVIDER CURTAIN ROLL-UP
1'-0" ± TYP. S 10'-0" MAX. 2'-0" MAX. WINCH 2" O.D. TOP STEEL TUBE IN FABRIC POCKET 2-3/8" O.D. STEEL DRIVE PIPE 12" MIN. DRIVE BELT ROLLED ONTO DRIVE PIPE JOIST OR TRUSS BOTTOM CHORD, SUPPORT TUBE OR
Truth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
C35 Mobius Floor Lamp & C Page 1 of 7
Mobius Floor Lamp 23-4505 & 23-4505C Page 1 of 7 Prepare Base (Figures 1& 2) A 8-32 Screw (2) B Wireway Cover Plate C Base D Lower Pipe Assembly E Threaded Stud (4) F Hex Nut (4) 1. Carefully unpack the
Remount Proposal. Everest Emergency Vehicles 1133 Rankin Street St Paul, MN Eric Olson
Remount Proposal Customer Dealer Everest Emergency Vehicles 1133 Rankin Street St Paul, MN 55116 651-236-8943 Eric Olson Module: INFORMATION 0.1.60 ****** Ambulance Re-chassis / Refurbish ****** * * Old
INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW. 1. Idle End Shade
INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW 1. Idle End Shade 4 3 2 2. Intermediate Bracket 3. Drive End Shade 4. Clutch 5. Stop Bead (attached in field) 6. Stainless Steel Bead Chain 1 7. Chain
(2) For mounting heights suitable in schools and other facilities used primarily by children see section
Last page revision- March 31st, 1999 TEXAS ACCESSIBILITY STANDARDS (TAS) TAS Table of Contents 4.10 Elevators. 4.10.1 General. (1) Accessible elevators shall be on an accessible route and shall comply
62ZB Spare Parts Diagram and Key
GXi Outdoor Power Equipment 62ZB Spare Parts Diagram and Key Versions: V0 SN Start Point : 62ZB180001 Tel: 1-919-550-3221 Web: www.beastpowerequipment.com 62ZB Frame Parts Diagram Key 1 SP11-000016 Deck
LIGHT DUTY ROLL UP DOOR
1-800-225-6729 LIGHT DUTY ROLL UP DOOR CAUTION Use proper lifting equipment and correct lifting procedures to avoid damage or injury. MODEL 150C installation guide A rolling door is a large heavy object
ALTITUDE ARMS AND CANOPY
INSTALLATION MANUAL ALTITUDE ARMS AND CANOPY RV THIS MANUAL PROVIDES INSTRUCTIONS FOR THE BASIC INSTALLATION OF THE AWNING. Read this manual before installing or using this product. Failure to follow the
PT SS/MI - Pass Thru
PT 2424-24 SS/MI - Pass Thru TABLE OF CONTENTS 1) 2) 3) 4) Pass Thru Brochure Pass Thru Drawing Operation Instructions Parts List Latch Info Hinge Info Spring Info Halco Warranty Pgs. 2-3 Pg. 4 Pgs. 6-8
Disassembly and Assembly NIPPONDENSO F4 & F8 SERIES STARTING MOTORS. Starting Motor
Page 1 of 11 Disassembly and Assembly NIPPONDENSO F4 & F8 SERIES STARTING MOTORS Starting Motor D3 TRACTOR 79U04709-UP (MACHINE) POWERED BY 3204 ENGINE(SEBP11 Page 2 of 11 F8 Starting Motor (1) Battery
6/17 HJ26077 Rev 12. US Pat. 7,506,886 US Pat. 7,753,392 CA Pat. 2,576,427 AS Pat PAGE 1
6/17 HJ26077 Rev 12 US Pat. 7,506,886 US Pat. 7,753,392 CA Pat. 2,576,427 AS Pat. 2007200421 PAGE 1 WARRANTY POLICY, OPERATOR MANUALS & REGISTRATION Go online to www.demco-products.com to review Demco
VIEW: Leader S/E Ford E350 Type II 138" W.B. (Silver Edition) Note: All dimensions are approximate and subject to change.
Code III 88R Red Halogen Code III 88-26 Clear Halogen Code III 88R Red Halogen 236" Curbside Exterior Drawn by: Jorge M. Date: Jan. - 2014 LE# 1 110 V. 15 Amp. Shoreline Code III 88R Red Halogen Code III
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HL400 LEGACY MIXER HL400 HL400C ML-134348 ML-134359 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43137 (June 2007) - 2 - HOBART Table Of Contents 5 CONTROL
HD 7700 Setup & Operator Manual
HD 7700 Setup & Operator Manual Issue 1 December, 01 Performance Design Inc. The Heavy Duty Ultima (HD 7700) electric punch has been designed to punch most any job that may pass through your bindery or
Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
Numatic International Spare Parts Model No: TT-6650 Handle Assembly
Model No: TT- Handle Assembly 0 0 0 0 0 DRAWING: EXP-0 ISS:A0 /0/ 0 0 Model No: TT- Handle Assembly 0 0MM PAINTED PROCESSED ALIMINIUM HANDLE HANDLE CASTING MACHINED ADJUSTMENT GEAR O RING MM DIA X 0MM
ATN IR850 Supernova LONG RANGE INFRA-RED ILLUMINATOR. USER S GUIDE (IR850 SUPERNOVA) REVISION 1 FEBRUARY, 2018 user s guide
ATN IR850 Supernova LONG RANGE INFRA-RED ILLUMINATOR USER S GUIDE (IR850 SUPERNOVA) REVISION 1 FEBRUARY, 2018 user s guide Important Export Restrictions! Commodities, products, technologies and services
PCAMA13MY. Designed for Chevrolet Camaro vehicles with MyLink. Subwoofer Assembly. Subwoofer Bracket Wire Ties x6 Rubber Bumper
PCAMA13MY Designed for 2013-2015 Chevrolet Camaro vehicles with MyLink Subwoofer Assembly Subwoofer Harness Adapter Harness Subwoofer Bracket Wire Ties x6 Rubber Bumper 2012 Stillwater Designs PCAMA13MY-A3-20151028
BISTRO 2 Hot Chocolate Dispenser SPARE PARTS CATALOG
Hot Chocolate Dispenser SPARE PARTS CATALOG TABLE OF CONTENTS WHIPPER ASSEMBLY Pages 3-4 HOPPER ASSEMBLY Pages 4-5 TANK ASSEMBLY Pages 6-9 SWITCHES Page 9 DOOR ASSEMBLY Pages 10-11 MISCELLANEOUS COMPONENTS
Lift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
Event. Road construction. Event. Mobile fence. Building construction. Civil engineering. Storage equipment. Transport equipment
42 Crowd barrier Urban Equipment Building Equipment Crowd barrier type D steel construction of Ø 33.7 mm round tube, hooks and connection brackets are welded to the sides for combining several elements,
User Manual BHI. Brookefield Hunter Incorporated 40 Buckskin Rd. Belgrade, MT 59714
User Manual Walk`n Chair TM b y B R O O K E F I E L D H U N T E R I N C O R P O R AT E D Brookefield Hunter Incorporated 40 Buckskin Rd. Belgrade, MT 59714 Walk`n Chair TM Model: L-3 Patent Number : 5,605,345
INSTALLATION INSTRUCTIONS. SMK-130 Speaker/Microphone Kit
INSTALLATION INSTRUCTIONS MicroComm DXI SMK-130 Speaker/Microphone Kit 1. Intent & Scope This document describes the installation procedure for the SMK-130 Speaker/Microphone Kit used in conjunction with
DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE GENERAL INFORMATION CAM DIES
GENERAL INFORMATION 1. ANGLE OF CAM SLIDE AND DRIVERS ANGLE OF CAM SLIDE AND DRIVERS ARE TO BE DIMENSIONED ON THE DIE DESIGN. FOR DRIVER ANGLES SEE, PAGE 4-7. AVOID THE USE OF CAM ADAPTORS. IF THE CAM
Door thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
C.fm Page 1 Thursday, February 21, :28 AM Raptor user manual
Raptor user manual 1 mounting bracket 2 swivel lock 3 clamp hole 4 lamp access screws 5 air vents 6 AC input & main fuse 7 cooling fan Thank you for selecting the Martin Raptor. This Martin lighting fixture
ELECTRICAL SOLUTIONS
Ties Type FL Flexible Material: Flexible Polypropylene UL Recognized continuous use temperature: 149 F (65 C) H W UL 94 flammability rating of V-2 Factory applied adhesive tape provided for easy mounting
Appendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
SUBJECT: While In Bi-level Mode, Air Flow From Panel Vents Is Less Than That Of The Floor Vents
NUMBER: GROUP: 24-20-99 Rev. A Heating & A/C DATE: Dec. 17, 1999 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced,
The. 3-circuit. system
L I G H T I N G T R A C K S Y S T E M The 3-circuit system 1 GLOBAL pro, the 3-circuit lighting track system The GLOBAL pro system of the GLOBAL trac family is a complete track system for shops, department
Fan, DVI Insert 31 and 33 DVI Installation Instructions (sku )
Packing List Fan, DVI Insert 31 and 33 DVI Left and Right Blower Assembly (with grommets and bushings) (2) Blower Mounting Nuts Wiring Harness Rheostat Snap Disc Rheostat Nut and Knob Nylon Rheostat Spacer
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS The original TOMMY GATE hydraulic lift Assembling the Auxiliary Battery Box 1. Remove the cover from the auxiliary battery box by removing the two nuts and
Brushless DC Axial Fans
Brushless DC Axial Fans General Specifications Material: Body PBT UL 9V- Fan PBT UL 9V- Insulation Class E Approvals UL, cul Recognized E89 Box Count: x 8 pieces x pieces 9 x pieces 8 x pieces x pieces
Standard and Brute tow bars:
1 Article I. Standard and Brute tow bars: In picture 7 the top tow bar is the standard tow bar. It is 29 3/8 7 total length as shown. It weighs 23 lbs and is rated about 4700 lb. In picture 7 the bottom
ECO VACUUM LIFTING VACUUM ROBOTS
UK and Ireland distributor ECO VACUUM LIFTING VACUUM ROBOTS Winlet 5 The Winlet 5 robot revolutionises the installation of glass, with capacities of up to 5kg and overhead installation all within a compact
DISASSEMBLY. Transmission. 2. Remove the 4 clutch housing bolts. Separate the clutch housing from the transmission.
308-03A-1 DISASSEMBLY Transmission 308-03A-1 Special Tool(s) Puller, Bearing 205-D064 (D84L-1123-A) or equivalent Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C) 2. Remove the 4 clutch housing
A22/M22. Specifications. Specifications Common to All. Complete Assemblies
Complete Assemblies Specifications Common to All A22/M22 The Following Pages Provide Information Common To Each Model of The A22/M22 Pushbutton Switch H A22 H A22S/W H A22K H M22 Specifications J APPROVED
DICTATOR RTS Tube Door Closer
DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The
I N D I A N S T A T I S T I C A L I N S T I T U T E
I N D I A N S T A T I S T I C A L I N S T I T U T E 8 th MILE POST, MYSORE ROAD, BANGALORE Tel : 080 28483002-28483006, Fax 080 22293517, E-mail : isib@isibang.ac.in TENDER DOCUMENT FINANCIAL BID (SUPPLY,
SCAMA10. Designed for Chevrolet Camaro vehicles. Subwoofer Assembly. Subwoofer Bracket Wire Ties x6 Wire Taps x2 Rubber Bumper
SCAMA10 Designed for 2010-2015 Chevrolet Camaro vehicles Subwoofer Assembly Subwoofer Harness Subwoofer Bracket Wire Ties x6 Wire Taps x2 Rubber Bumper 2012 Stillwater Designs SCAMA10-A3-20151028 M6 Nut
DRAWING: DRW-4622 ISS:A03
Model No: TT-0S Base / Deck Assembly NB: FOR WIRING SEE DRAWING: WD-0 0 0 0 0 DRAWING: DRW- ISS:A0 /0/0 0 Model No: TT-0S Base / Deck Assembly 0 COMBINED INDUCTION MOTOR POLE 0-0V 0Hz 0 COMBINED INDUCTION
Numatic International Spare Parts. Model No: TTB4500/100ST Handle Assembly NB: FOR WIRING SEE DRAWING: WD-0354 & WD-0356.
Model No: TTB00/0ST Handle Assembly NB: FOR WIRING SEE DRAWING: WD-0 & WD-0 DRAWING: EXP-0 /0/00 ISS:A0 0 0 0 0 0 0 0 0 0 Page of Model No: TTB00/0ST Handle Assembly POS: ITEM NO: DESCRIPTION: COMMENTS:
Squeeze Action Plier Clamps
7.1 N[lbf.] Maximum Clamping Thickness mm [inch] Series Section.Page 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 4000 [675 to 900] 4000 to 5000 [900 to 1125] 5000 to
ATR Tow Bar Equipment Manual
HALL INDUSTRIES, Inc. 514 MECKLEM LANE, ELLWOOD CITY, PA 16117 http://www.hallindindustries.com E mail: service @ hallind.com ATR Tow Bar Equipment Manual Use This Manual for 1. Operating Procedures 2.
Golight Radioray GL-5149-F-M Portable Wired Handheld Remote Control Flood Light - Magnetic
Golight Radioray GL-5149-F-M Portable Wired Handheld Remote Control Flood Light - Magnetic Part #: GL-5149-F-M The GL-5149-F-M Golight Radioray from Larson Electronics is a 65 Watt motorized flood and
Manual Brake Conversion Kit, (MMBAK-13)
3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com Manual Brake Conversion Kit, 1994-95 (MMBAK-13) The MM kit includes a CNC machined
Assembling a Wall-Mounted CTS
CHAPTER 3 Revised: February 4, 2010, This chapter provides you with the information you need to assemble a wall-mounted CTS-500-37 and includes the following sections:, page 3-1 Installing the External
Measurements are expressed in millimeters.
T-Rex user manual Measurements are expressed in millimeters. 1 Lamp access 2 Focus adjustment 3 Mounting bracket 4 Swivel locks 5 Clamp hole 6 Air vent 190 285 7 AC input & main fuse 8 Microphone 490 164
*VIVA irail - illuminated Rail System designed for indoor and outdoor lighted rail applications. X Y 42" LED Lens: Clear or Frosted
*VIVA irail illuminated Rail System designed for indoor and outdoor lighted rail applications. irail LIGHT DISPERSION DIAGRAM All Values in FootCandle (FC) +/5% Values using clear lens. 000K MEDIUM OUTPUT
expandable booster Instruction Manual US Version
expandable booster Instruction Manual US Version product: monterey expandable booster model series: 15000 mfg. by: Diono LLC 14810 Puyallup Avenue Sumner, WA 98390 Customer Care Tel: 1 (855) 463-4666 us.diono.com
PROCEDURE STEPS: WARNING:
WI-FI ROUTER 1 DODGE NITRO, JEEP LIBERTY PROCEDURE STEPS: WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect
Smooth Roll Advantage Side Dump
Smooth Roll Advantage Side Dump Installation, Maintenance and Safety Instructions Sioux City Tarp 5201 Harbor Drive Sioux City, IA 51111 Ph: 712-258-6939 Getting Started Important: Please read manual thoroughly
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG WWW.PROWELDINTERNATIONAL.COM 129 COMMERCE DR LAGRANGE, OH. 44050 PHONE: (440)-355-6064 FAX: (440)-355-6474 07/01/02 CD WELDING SYSTEMS PART # LIST PRICE CD-212
Rear Roller Brush Kit Greensmaster 3150 & 3250
Rear Roller Brush Kit Greensmaster 50 & 50 Model No. 04640 Model No. 0464 Form No. 8 808 Rev. B Installation Instructions Note: The Rear Roller Brush Kit can only be installed on cutting unit models 0460
Panel Beating Hammers
PANEL & TRIM Panel Beating Hammers n Polished forged, induction hardened hammer heads n Quality hickory timber handles wedged to heads for safety and retention 313055 313058 313056 313059 313057 313060
Polyurethane Notice Boards
NTBD07 Notice Boards Q50 250 Polyurethane Notice Boards Notice Board with Hendon Post and Ball Finial, Whitby Marshalls Street Furniture offer a range of Ferrocast Notice Boards which can be customised
Prolift SCL/Prolift HD
Prolift SCL/Prolift HD Accessibility Lifts OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000782 30-m06-2017 2 IMPORTANT Ensure that only an Authorized
CARGO ALL PLANT CREATED FOR CONSTRUCTION YOUR TRANSPORT ASSISTANT
44 45 CARGO ALL PLANT CREATED FOR CONSTRUCTION YOUR TRANSPORT ASSISTANT CarGO All Plant epitomises the Brian James Trailers approach to providing solutions. There is nothing included that is not needed