DETENTION ACCESSORIES
|
|
|
- Clinton Daniels
- 6 years ago
- Views:
Transcription
1 DETENTION ACCESSORIES Engineered to last 20 years to life.
2
3 Designed with Durability in Mind PDI s standard and custom specification detention accessories are the most the cost-effective solution for new construction or retrofits, and contribute to safer correctional environments. Fabricated with hard wearing steel or stainless steel for long-lasting value, PDI accessories are virtually indestructible. Resistance to scratching, dents, and markup withstand years of use and abuse. Polished surfaces are easier to clean and disinfect, helping reduce the spread of germs. Multi gauge steel mounting plates provide secure installation in any environment. Table of Contents Key Cabinet...2 Long Gun Locker...3 Pistol Locker - Standard...4 Pistol Locker - Tilt...5 Package Pass...6 Food Pass...7 Safety Shelves with Hooks...8 Ball & Pin Safety Hook...9 Safety Hook...10 Speaker Port...11 One Piece Mirrors...12 Two Piece Mirrors...13 Soap dish...14 Toilet Paper Holder...15 Grab Bars...16 Safe Bar...17
4 KEY CABINET KC1000 Door hung on continuous steel piano hinge and flanged 1 all around for additional strength. Equipped with interior swinging 10 gauge steel leaf panels for maximum key storage. Coated with factory primer for finish painting. Shell: 10 gauge steel Door: 10 gauge steel plate Key racks: 14 gauge bent steel plates 24 H x 18 5/8 W CAPACITY 180 Key Capacity 300 Key Capacity 405 Key Capacity 60 Paracentric Keys 60 Paracentric Keys 120 Paracentric Keys 120 Mogul Keys 120 Mogul Keys 180 Mogul Keys 120 Builders Keys 105 Builders Keys Mounting holes provided for installation with 3/8 anchors. Anchors not provided by PDI. KC1000 Custom key capacity per project requirements. Powder coat finish. Page 2
5 LONG GUN LOCKER LG1000 Secure long gun locker with 3, 4, 6 or 8 compartments for rifles or shotguns. Doors on 11/2 open x.060 continuous piano hinge with.125 pin, and ABLOY cam locks Shell: 10 gauge steel Doors: 10 gauge plate Vary by specification 1/2 diameter anchor holes provided in back of unit for wall mounting. Anchors not by PDI. Custom capacity and size based on project requirements. Factory red oxide primer finish. Stainless steel with polished finish. Powder coat finish. Custom compartments. LG sales@pdidet.com pdidet.com Page 3
6 PISTOL LOCKER - STANDARD PL1000 Secure pistol locker equipped with cam locks. Doors are hung on continuous steel piano hinges and include and internal door stop mechanism. Two keys supplied per compartment and two master keys supplied per unit. Coated with factory primer. Angle frame can be shipped loose for semi-recessed installation and field welded in place. Mounting Shell: 10 gauge steel Doors: 10 gauge plate 7/16 diameter holes for mounting. Locker dimensions vary 21/2 x 21/2 x 10 gauge angle frame PL1000 Mounting plates provided with 7/16 diameter holes for 3/8 anchors. Anchors not by PDI. Custom capacity and size based on project requirements. Locker compartment tags. Stainless steel. Galvanized steel. Powder coat finish. Page 4
7 PISTOL LOCKER - TILT PL2000 Secure pistol locker with tilt out compartments equipped with Master snap locks. Compartments are hung on continuous steel piano hinges and include internal stop bars. Two keys supplied per compartment and two master keys supplied per unit. Coated with factory primer finish. Angle frame can be shipped loose for semi-recessed installation and field welded in place. Mounting Shell: 10 gauge steel angle frame Doors: 10 gauge plate 7/16 diameter holes for mounting Locker dimensions vary 21/2 x 21/2 x 10 gauge angle frame PL2000 Mounting plates provided with 7/16 diameter holes for 3/8 anchors. Anchors not by PDI. Custom capacity and size based on project requirements. Locker compartment tags. Stainless steel. Galvanized steel. Powder coat finish sales@pdidet.com pdidet.com Page 5
8 PACKAGE PASS PP1000 Package Pass doors are connected with a control mechanism allowing only one door to be open at a time. Secure side door equipped with a Master snap lock and door pull. Coated with factory primer for finish painting. 11 gauge doors 10 gauge body 7 gauge plate door Maximum package size 19 W x 13 H Door is equipped with two 7 gauge angle collars for installation. PP1000 Powder coat. Stainless steel door. Page 6
9 FOOD PASS FP1000 Food Pass door is on a continuous piano hinge. Adjoining slip collars create a secure pass through. Food pass face prepped for a detention snap lock. Coated with factory primer for finish painting. 12 gauge assembly and handle 7 gauge plate door 12 3/8 H x 19 5/16 overall 4 1/2 H x 15 W pass thru opening Create cut out for food pass and either field weld or thru-bolt. Powder coat. All stainless steel. Galvanized material. FP sales@pdidet.com pdidet.com Page 7
10 SAFETY SHELVES WITH HOOKS SF1000/SF gauge thick hook bolted to 10 gauge bracket with non-removable security screw and tension washer 8 D x 6 H x 18 W 5 x11 /2 x 10 gauge (shelf ) Wall mounted with 5/16 diameter mounting holes and 1/4 anchors. Anchors not by PDI. Powder coat finish. All stainless steel. All galvanized material. SF2000 SF1000 Page 8
11 BALL & PIN SAFETY HOOK SH2000 Stainless steel body and round ball hook with steel back strap and nylon bushing. Up to 4 hooks. 14 gauge stainless steel 16 gauge stainless steel back strap 4 H x 4 W x 1 D SH2000 Punched and countersunk for wall mounting with 1/4 anchors.. Anchors not by PDI. Single, 2, or 4 hook strip. Powder coat finish sales@pdidet.com pdidet.com Page 9
12 SAFETY HOOK SH1000 Hook bolted to bracket with non-removable security screw and tension washers. 10 gauge mounting plate and bracket 7 gauge hook 5 H x 11/2 W 5/16 diameter holes for wall mounting with 1/4 anchors. Anchors not by PDI. SH1000 Powder coat finish. All stainless steel. All galvanized material. Page 10
13 SPEAKER PORT SP1000 Stainless steel face plate with perforated pattern, connected with a pass-proof segment. Polished to a #4 finish. Ships with security screws for assembly. Stainless steel 61/2 diameter x 1/8 Install face plates from opposing sides of glass. Fasten both face plates together with provided security screws. SP sales@pdidet.com pdidet.com Page 11
14 ONE PIECE MIRRORS MR1000/MR1001 One piece mirrors are stamped stainless steel with a polished mirror finish. LARGE ONE-PIECE MIRROR Frame 16 gauge steel Mirror 20 gauge stainless steel Frame: 91/2 W x 111/4 H x 5/16 D Mirror: 10 W x 14 H SMALL ONE-PIECE MIRROR Frame 14 gauge steel Mirror 20 gauge stainless steel Frame: 10 W x 111/2 H x 1/4 D Mirror: 8 W x 93/4 H Eight 5/16 diameter countersunk holes provided for installation with 1/4 flat head anchors. Anchors not by PDI. Mirror can be installed onto optional mounting plate or embed plate which ships with eight 1/4-20 stainless steel FH security screws for installation. MR1001 MR1000 Mounting plate. Embed plate. Page 12
15 TWO PIECE MIRRORS MR2000/MR2001 Two Piece Mirrors are composed of a stamped chrome plated and polished frame with mirror insert. Mirror is steel sheet polished to a mirror finish approximating that of glass. LARGE 2-PIECE MIRROR Frame 16 gauge steel Mirror 20 gauge stainless steel Frame: 121/2 W x 181/2 H x 5/16 D Mirror: 10 W x 14 H SMALL 2-PIECE MIRROR Frame 14 gauge steel Frame: 10 W x 111/2 H x 5/16 D Mirror: 8 W x 91/2 H MR2000 Eight 5/16 diameter countersunk holes provided for installation with 1/4 flat head anchors. Anchors not by PDI. Mirror can be installed onto optional mounting plate or embed plate which ships with Eight 1/4-20 stainless steel FH security screws for installation. MR2001 Mounting plate. Embed plate sales@pdidet.com pdidet.com Page 13
16 SOAP DISH SD gauge stainless steel with exposed surfaces in satin finish Mounting Plates: 11 gauge stainless steel 71/2 W x 55/8 H x 23/4 D Provide 6 W x 4 H x 3 D wall opening for installation. Chase mounted with rear threaded studs and flat bar back plate. Face mounted with 5/16 diameter holes for 1/4 button-head anchors. SD1000 Page 14
17 TOILET PAPER HOLDER TP gauge stainless steel one-piece drawn, seamless construction with exposed surfaces in satin finish 7 W x 7 H x 49/32 D Provide 53/4 diameter x 41/4 D wall opening for installation. Unit can be chase mounted or face mounted. Chase mounted with rear threaded studs and flat bar back plate. Face mounted with 5/16 diameter holes for 1/4 button-head anchors. TP sales@pdidet.com pdidet.com Page 15
18 GRAB BARS GB1000/GB2000 Stainless steel detention grab bars for use in handicap accessible areas. Tube: 18 gauge, type 304 stainless steel Mounting Plates: 11 gauge stainless steel Tube: 11/2 diameter Mounting Plates: 4 diameter Three 7/16 diameter holes drilled in mounting plates for anchors. Anchors not by PDI. GB1000 Closure Plate - bottom gap between wall and grab bar closed with a 10 gauge plate with 1/4 diameter holes for drainage. GB2000 Page 16
19 SAFE BAR SB1000 Continuous extruded aluminum grab bar, hard-coat anodized. Extruded 6063-T52 aluminum 11/2 diameter grab area 11/2 gap from grab area and wall 7/16 diameter holes for 3/8 anchors. Anchors not by PDI. Safe bar end caps. SB pdidet.com Page 17
20 Headquarters 577 N. Batavia Orange, CA fax pdifurn 0513
Detention Furniture. Engineered to last 20 years to life.
Detention Furniture Engineered to last 20 years to life. Designed with Durability in Mind PDI s standard and custom specification detention furniture is the cost-effective solution for new construction
The Leading Manufacturer of Premium Detention Hardware & Accessories
PRODUCT CATAL ALOG All rights reserved. No part of this catalog may be reproduced in any form or by any means for commercial purpose, without the prior written permission of Northwest Specialty Hardware
NEVER OUT CATALOG WASHROOM ACCESSORIES
NEVER OUT CATALOG WASHROOM ACCESSORIES With thousands of available washroom products, ASI customers already know that if they want it, ASI has it. Among those thousands, there are certain products 103,
NEVER OUT CATALOG WASHROOM ACCESSORIES
NEVER OUT CATALOG WASHROOM ACCESSORIES With thousands of available washroom products, ASI customers already know that if they want it, ASI has it. Among those thousands, there are certain products 103,
Standard Lockers Series Double Tier Installation Instructions
Thank you for selecting Salsbury s standard double tier lockers. These instructions are intended to assist you in assembling the lockers. Note that a 6 feet high locker is shown. Hole locations on the
2016 Product Description BradEx RX Qty BX-MEDICINE CABINET- RECESSED BX-TOWEL/WASTE UNIT- RECESSED
2016 Product Description BradEx RX Qty 175-000000 BX-MEDICINE CABINET- RECESSED- 5 2017-000000 BX-TOWEL/WASTE UNIT- RECESSED 5 2017-100000 BX-TOWEL/WASTE UNIT- SEMI- 5 2027-000000 BX-TOWEL/WASTE UNIT-
Steel Security Cabinets
3-point locking system with double-bitted, key-coded cylinder lock for greater security. Removable shelves are included for greater storage and organization. Exteriors have a high gloss powder paint finish
Durulite Door Hardware Manual
R Durulite Door Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 FAX: 1-800-245-7045 Www.chasedoors.com TABLE OF CONTENTS DESCRIPTION
Division 10 Catalog. Washroom Accessories from Bradley NEW. pg 16. distributed by RESTROOM DIRECT
NEW High Speed, High Efficiency Hand Dryers pg 16 Division 10 Catalog Washroom Accessories from Bradley One source to perfectly accessorize every application BRADLEYCORP.COM BRADLEY WASHROOM ACCESSORIES
Convector. Catalog MANUFACTURERS HEATING PRODUCTS. Tel: (905) Fax: (905) OF HYDRONIC.
Catalog MANUFACTURERS OF HYDRONIC HEATING PRODUCTS www.sigmaproducts.com Tel: (905) 670-3200 Fax: (905) 670-3822 Product Overview Sigma s are available in a number of cabinet styles to suit any building
SECTION METAL ATHLETIC SPORT LOCKERS
SECTION 10 50 13 - METAL ATHLETIC SPORT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
Division 10 Catalog. Washroom Accessories from Bradley. Introducing. pg 16. High Speed, High Efficiency Hand Dryers
Introducing High Speed, High Efficiency Hand Dryers pg 16 Division 10 Catalog Washroom Accessories from Bradley One source to perfectly accessorize every application BRADLEY WASHROOM ACCESSORIES WARRANTY
Division 10 Catalog. Washroom Accessories from Bradley. One source to perfectly accessorize every application BRADLEYCORP.COM
Division 10 Catalog Washroom Accessories from Bradley One source to perfectly accessorize every application BRADLEYCORP.COM BRADLEY WASHROOM ACCESSORIES WARRANTY Product warranties may be found on bradleycorp.com
SECTION FIRST RESPONDER SERIES HEAVY DUTY PERSONNEL LOCKERS DEBOURGH MFG. CO. 10/15/2013
SECTION 10501 FIRST RESPONDER SERIES HEAVY DUTY PERSONNEL LOCKERS DEBOURGH MFG. CO. 10/15/2013 PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
FORD PRODUCTS 2018 CATALOG V7.2 VAN INTERIORS TRUCK RACKS VAN RACKS AND MORE
FORD PRODUCTS 2018 CATALOG V7.2 VAN INTERIORS TRUCK RACKS VAN RACKS AND MORE KARGOMASTER.COM 800-343-7486 TABLE OF CONTENTS Cargo Van Interior Package & Products TRANSIT, MID/HIGH ROOF PACKAGES Base, 40TRM
PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
Cincinnati, Ohio and Redmond, Oregon Phone: Fax:
Durulite Retailer Hardware Manual Durulite Retailer Hardware Manual World s Leading Manufacturer Of Traffic Doors Cincinnati, Ohio and Redmond, Oregon Phone: 1-800-543-4455 Fax: 1-800-245-7045 www.chasedoors.com
THE MOST VERSATILE SERVICE BODIES ON THE MARKET SERVICE BODIES
THE MOST VERSATILE SERVICE BODIES ON THE MARKET SERVICE BODIES SERVICE BODIES SERVICE BODIES COMPONENT BODY SERVICE BODY 2011 NTEA Work Truck Show Editors Choice Award THE STORY The Component Body (CB)
Washroom Accessories Service Parts List Price Book 0514WSP
Washroom Accessories Service Parts List Price Book 0514WSP Table of Contents Hair-Hand Dryers (Models 2870 thru 2874, 2889, 2896, & 2897) 2 Hand Dryers (Models 2875-28 & 2885-28, 2877-28 & 2887-28) 3 Aerix
SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.
INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # P2067
INSTALLATION INSTRUCTIONS GRILLE GUARD 07-14 TOYOTA TUNDRA 08-14 TOYOTA SEQUOIA PART # P2067 PARTS LIST: GRILLE GUARD 1 Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left
ROTON CONTINUOUS GEARED HINGES TABLE OF CONTENTS. L Length Specifications B Bearing at Top...4 Bearing on Top...4 Bearing Replacement Kit...
TABLE OF CONTENTS B Bearing at Top...4 Bearing on Top...4 Bearing Replacement Kit... 10 C Center Punches... 10 Concealed Electric Monitoring... 5, 7 Concealed Electric Through-Wire... 5, 7 Concealed Electric
Hi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
LEADING THE WAY NEW PRODUCTS SPRING
LEADING THE WAY NEW PRODUCTS SPRING 2017 Organizational Products Stay organized with a host of new cargo van organizational products from Kargo Master. These products make is easy to organize all your
SECTION METAL LOCKERS
SECTION 10 5113 METAL LOCKERS This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be revealed or
AC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
ISO 9001:2008
HATCH Single Leaf, Premium Duty, Individual Dog Model 3130 Features FREEMAN MARINE custom fabricated Premium Duty hatches offer a wide range of options to meet virtually any specification. Rugged construction
SECTION LABORATORY FITTINGS
SECTION 11605 LABORATORY FITTINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Stainless steel laboratory pegboard drying racks. B. Stainless steel counters and sink bowls. C. Stainless steel shelving. D. Stainless
Door, Hatch & Interior Fittings
Sea Blue Security Locks NEW 10 Year Guarantee Sea Blue Security locks have been developed in the lock capital of England to withstand both corrosion and physical attack. Heavy steel full casings are used
Code 175: Recessed, polished chrome finish
Dispensers for Paper Products Facial Tissue Dispenser 175: Recessed, polished chrome finish 180: Surface mount, polished chrome finish 175 180, 3/4 view Face plate manufactured from 20 ga. steel. Die formed
1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
About.
TM About Harris Hardware was founded in 1909 in Brooklyn, NY. During our long history, we have been a leading supplier of hardware to various specialty markets. Since 1980 Harris has manufactured custom
ARCHITECTURAL HINGES TABLE OF CONTENTS. A Architectural Finish Symbols B Back Plate E ECCO Emergency Stop Release...
TABLE OF CONTENTS A Architectural Finish Symbols...2-3 B Back Plate... 11 E ECCO... 78-80 Emergency Stop Release... 14 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)...21, 28, 31 Detention
BATHROOM ACCESSORIES COMMERCIAL/INDUSTRIAL/ PHYSICALLY DISABLED/ BATHROOM ACCESSORIES BATHROOM ACCESSORIES
COMMERCIAL/INDUSTRIAL/ PHYSICALLY DISABLED/ BATHROOM ACCESSORIES B = BULK C = CARDED ITEM NO. PACK DESCRIPTION CTN. QTY. BATHROOM ACCESSORIES 35-0050 C Liquid soap dispenser Wall mount Easy to fill 24
Kargo Master Sheet Metal Partitions Features and Benefits
PARTITIONS SHEET METAL PARTITIONS Kargo Master Sheet Metal Partitions Features and Benefits 18 gauge steel, hemmed and embossed to provide extra strength, security and reduce noise. EXTRA SECURITY. Corner
Chapter 52 DOORS -Title
Chapter 52 DOORS 52-Title Page 1 January 23, 2012 INTENTIONALLY LEFT BLANK 52-Title Page 2 January 23, 2012 LIST OF EFFECTIVE PAGES Chapter Section Page No. Date 52 52-Title 1 January 23, 2012 2 January
ISO 9001:2008
DOOR Dutch, Heavy Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the bottom
76% post-consumer / 15% pre-consumer
#4 BRUSHED HYBRID & EMBOSSED MARKET COST INDEX: $ $$$ FIRE RATING: C (GOOD) B (BETTER) A (BEST) RECYCLED CONTENT: 76% post-consumer / 15% pre-consumer Stainless Steel BEAUTIFUL AND LONG LASTING A NATURAL
Stainless Steel Pass-Through Cabinets
healthcare division CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR Proudly Made in the USA for over 65 years Stainless Steel Pass-Through Cabinets CMP has
Carts and Trucks. All-welded design using 14 gauge Steel, Heavy-Duty Angle Iron all units; powder coated. Carts and Trucks
Carts and Trucks Carts and Trucks Mobile Bench Cabinets 84-88 3 & 4 Sided Stock Trucks 92 2-Sided Mobile Cart/Workstations 89 Bar Cradle Trucks 93 Rolling Service Stock Carts 90 Steel Platform Trucks 93
6" steel handle (includes two (2) keys) STORAGE CABINETS - STANDARD, WARDROBE, COMBINATION AND COUNTER HEIGHT
Storage Cabinets STORAGE CABINETS - STANDARD, WARDROBE AND COMBINATION Constructed of 20 gauge steel, Salsbury 9000, 9100 and 9200 series storage cabinets are ideal for offices, garages, institutions and
AVENTOS HS Up and over lift system
AVENTOS HS Up and over lift system Perfecting motion AVENTOS HS Table of contents Overview Page 2-4 Features 5-6 Using this catalog 7 Blum, Inc. is a leading manufacturer of functional hardware for the
1010A DEADLOCK DOOR MOUNTED FOR SMALL SWINGING DOORS APPLICATION: FUNCTION: CRAFTMASTER HARDWARE CO., INC
DOOR MOUNTED FOR SMALL Maximum security. 1010A-1: KEYED ONE SIDE 1010A-2: KEYED BOTH SIDES For small swinging doors on access panels, plumbing chases, control cabinets, etc. FUNCTION: Key activated locking
Making More of. January 2006 AMERICAN SPECIALTIES, INC.
Making More of A C C E S S O R I E S January 2006 f o r w a s h r o o m s a n d h o s p i t a l s AMERICAN SPECIALTIES, INC. SIMPLICITY COLLECTION Table of Contents Crisp and clean lines for aesthetically
LENOXLOCKER. Lenox Locker - Solid Plastic. Construction - Standard Features
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
> Continuous > Butt > Specialty
> Continuous > Butt > Specialty CONTENTS 6 Hinge Nomenclature 8 Continuous Hinges 14 316 STS Hinges 14 Electrogalvanized Hinges 14 Raw Brass 14 Polished Stainless w/holes 15 Preplated Steel w/holes 15
makes sure products are delivered Products are offered in steel,
Residential Construction Features Residential Registers, Grilles & Diffusers No one satisfies the demands for For example: an electro-deposition air distribution solutions better than paint creates a flawless
UPDATED v6.3. Cargo Van Racks & Interior Equipment FORD 2017 PRODUCTS CATALOG
UPDATED 9.0. v. Cargo Van Racks & Interior Equipment FORD 0 PRODUCTS CATALOG WWW.KARGOMASTER.COM 800--8 TRANSIT CONNECT ALUMINUM VAN PACKAGES COMMERCIAL SHELVING // " H Shelves // Compact Cargo Vans 00AL
DOOR French, Heavy Duty, Individual Dog Model 1620 Features 1
DOOR French, Heavy Duty, Individual Dog Model Features 1 When wider access is needed, FREEMAN MARINE French doors perform like two single panel doors that seal to each other. The same high quality tooling
UNIBODY ATHLETIC ALL-WELDED LOCKERS 3-Point projecting turn-handle HTHV-01 Turn-handle Ventilated Lockers STANDARD SIZES FOR ALL-WELDED WARDROBE LOCKERS SINGLE TIER DOUBLE TIER TRIPLE TIER Widths 9'',
INSTALLATION & OWNER S MANUAL
INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 4000 SERIES (4500/4600/4700) (4510/4610/4710) (4120/4320/4520/4720) HARD SIDED CAB ENCLOSURE (p/n 1JD4120AS) SOFT SIDED CAB ENCLOSURE
300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
K.D. LOCKER ASSEMBLY INSTRUCTIONS
Instructions PN 860 K.D. LOCKER ASSEMBLY INSTRUCTIONS These Instructions Cover 3 Types of Lockers: VANGUARD, GUARDIAN AND INVINCIBLE II CONTENTS Single Tier Vanguard Locker (Single Row) GENERAL INSTRUCTIONS
Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto
Specialty tools Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto includes popular puller configurations,
M ANUFACTURER S M ANUFACTURER, INC.
M ANUFACTURER S M ANUFACTURER, INC. P r o fe s s i o n a l P a i n t E q u i p m e n t B o d y E q u i p m e n t S t o r a g e S o l u t i o n s Volume 2017 w w w. m f g m f g. c o m 339 West Avenue I
ACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
Storage Fittings 1 º q µ ³ ³ Â É 1.1
1.0 Storage Fittings 1 1.1 1 ARENA Plus anti-slip finish welcome to the quiet kitchen Kesseböhmer developed the special ARENA Plus coating which prevents pots and pans, crockery and groceries slipping
Architectural Door Accessories
Architectural Door Accessories Pemko Sliding Door Hardware Catalog 2018 Pemko Manufacturing Company Pemko Sliding & Folding Hardware CONTENTS: INDEX: PRODUCT PAGE 12... 264 22... 266 32... 265 42... 267
LENOXZLOCKER. Lenox Z Locker - Solid Plastic. Construction - Standard Features. Sizes. Doors and Frames. Sides, Tops, Bottoms, Dividers and Shelves
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
UPDATED v3.0. Cargo Van Racks & Interior Equipment GMC/CHEVY 2016 PRODUCTS CATALOG
UPDATED 4.30.16 v3.0 Cargo Van Racks & Interior Equipment GMC/CHEVY 2016 PRODUCTS CATALOG WWW.KARGOMASTER.COM 800-343-7486 Chevy City Express Steel Van Packages Compact Cargo Vans Commercial Shelving Part
2015 CATALOG. Cargo Control FOR THE ROAD AHEAD HEAVY DUTY PRODUCTS.
2015 CATALOG Cargo Control FOR THE ROAD AHEAD EXALOY : For the Road Ahead Contents / Winch Straps FOR THE ROAD AHEAD EXALOY Cargo Control Products are made with high quality materials and precision craftsmanship
INSTALLATION & OWNER S MANUAL
INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS JOHN DEERE 3000 SERIES (4200/4300/4400) (4210/4310/4410) & (3120/3320/3520/3720) HARD SIDED CAB ENCLOSURE (p/n 1JD3520AS) SOFT SIDED CAB ENCLOSURE
ARCHITECTURAL DOOR HARDWARE DOOR STOPS & HOLDERS THRESHOLDS & GASKETING CATALOG
ARCHITECTURAL DOOR HARDWARE DOOR STOPS & HOLDERS THRESHOLDS & GASKETING CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index DOOR STOPS
Code no. 61 STAINLESS STEEL 316 HINGES
Code no. 61-003 Stainless steel pin diameter 7 mm. With stainless steel washers and 6 countersunk holes for M5 screws. L 76 x 76 x 2.5 mm, pin dia = 7 mm R/H Stainless steel pin diameter 7 mm. With stainless
Locker Specifiers guide
Specify Lyon. Locker Specifiers guide LS070209 s p e c i f y l y o n! Premier Colors Lyon s Premier color selections and/or a computerized match to your custom color offer a virtually endless combination
UPDATED v4.3. Cargo Van Racks & Interior Equipment FORD 2016 PRODUCTS CATALOG
UPDATED 6.15.16 v4.3 Cargo Van Racks & Interior Equipment FORD 2016 PRODUCTS CATALOG WWW.KARGOMASTER.COM 800-343-7486 Transit Connect Aluminum Van Packages Compact Cargo Vans Commercial Shelving Part #400AL
INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # 2067/2067-2
INSTALLATION INSTRUCTIONS 07-15 TOYOTA TUNDRA 08-15 TOYOTA SEQUOIA PART # 2067/2067-2 PARTS LIST: 1 Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left Frame Mounting
Freight 1) Shipments are F.O.B. factory. 2) Claims for damaged goods or shortages must be reported within 5 days of shipment date.
Price List 1 Hygienic Solutions at Work April 1st, 2015 Revision 17 Warranty If any product or part proves to be defective within 12 months from date of shipment from the factory it will be repaired or
Washroom Accessories List Price Book 0216WAP
TEL: 800.BRADLEY FAX: 262.251.5817 bradleycorp.com Washroom Accessories List Price Book 0216WAP Table of Contents Introduction 2 Diplomat 3, 4 Multi-Purpose Units 5 Towel-Waste Units 6, 7 Towel Dispensers
THE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
Sliding Door Fittings, Roller Shutters Pivot Sliding Door Fittings
Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used
Urban Rack. Basket Racks. Hard Top Carrier. Bike Racks. Made in the USA. Stainless Steel Deck Rack. Track Mounts. Gutter Mount Adapter
Stainless Steel Deck Rack The perfect combination of style and functionality DR1000 No trunk space, no problem 4" deep basket All aluminum construction In smooth satin anodized finish or durable black
Steel Hinges. Section 1 Page 1. LIGHT STEEL BUTT HINGES MHL Fixed Pin. MHL Loose Pin. STRONG STEEL BUTT HINGES MHL 15.
Steel Hinges LIGHT STEEL BUTT HINGES MHL 15.01 Fixed Pin Sizes: 40, 50, 65, 75, 100, 150 mm. MHL 15.02 Loose Pin Sizes: 75, 100 mm. MHL 15.01 STRONG STEEL BUTT HINGES MHL 15.03 Fixed Pin Sizes: 75, 100
Vents & Fuel Fittings. Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys
7 Vents & Ventilators Collector Boxes Pitot Tube Shield Deck Plates Deck Plate Keys Hose Adapter Drains Deck Fills Deck Fill Keys Gas Tank Vents Ski Tows Vents & Fuel Fittings 7 Vents & Fuel Fittings LOUVERED
Tall & Pantry Accessories
Tall & Pantry Accessories Organizing your pantry is easier than ever with Rev-A-Shelf s innovative line of accessories. Whether you prefer the beautiful look of wood, the luxurious style of chrome, or
Metal Lockers Deluxe Coin Athletic Specialty Police & Crew Custom
Metal Lockers Deluxe Coin Athletic Specialty Police & Crew Custom Division 10 51 13 Metal Lockers Section 10500 Deluxe Series Lockers Fresh lines, smooth and silent operation, safety and durability make
Modular Enclosure Solutions Specifier s Guide
Modular Enclosure Solutions Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 1 The Next Generation Modular Enclosure Stronger. Faster. Easier. You ve already spent tens of thousands
SOLID PHENOLIC LOCKERS 1 MOST COMPLETE LOCKER LINE AMERICA S MOST COMPLETE LOCKER LINE. Since 1936
TM AMERICA S MOST COMPLETE LOCKER LINE 1 Proudly AMERICA S Made in America MOST COMPLETE LOCKER LINE Since 1936 Superior Lockers for Superior Satisfaction VersaMax Solid Phenolic lockers are engineered
Pre-Packaged Hardware
New! Pre-Packaged Hardware Panel & Pilaster Packs 2-Ear Wall Bracket Headrail Bracket Wrap-Around Pivot Hinge () Strike / Keeper (Outswing) Slide (Outswing) Door Stop Door Hardware Packs The Story Originally
Cabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
Type 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
SWING DOOR SOFT ENCLOSURE (part# 16733)
800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench
Spider Shelving System
Spider Shelving System SHELVING INDEX SYSTEM THE MOST VERSATILE THAT EXISTS Much more than a simple shelving unit! Sturdy construction and quick assembly, the Spider shelving system meets all of your storage
Exam Room Group (shown) 8010 (reversed) W: 43", 46", 49" H : Wall: 30", Desk: 30" D : Wall: 14.25", Desk: 24.25" Cabinet group consists of:
Exam Room Group Exam Room Group 8008 W: 29" - 50" (3" increments) H : Wall: 8", Desk: 30" D : Wall: 13.25", Desk: 24.25" #3020 wall mounted book shelf (27" - 48" W) #1500-4.5" knee space drawer (27" -
: PVC
Dock Seals are fabricated from 22 oz and 40 oz (heavy duty) vinyl pvc which is nylon reinforced for strength and durability. When driveways slope beveled side pads are recommended for a proper seal. Drape
LENOXLOCKER. Lenox Locker - Solid Plastic. Construction - Standard Features
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
US FUTABA ESTABLISHED 1983 NEW IN THIS SECTION OFFICE LINE. Short Type 4 5-1/8" ( mm) 23.5 Ø /4" 45 mm. 1-3/16" 30 mm 5/8" 15.
0 5 1-3/4" 1-3/16" 30 5/8" 15.8 15 ESTABLISHED 1983 31/64" 1 Ø 100 Ø + 1/" 1" 1/8" NEW IN THIS SECTION " Short Type 4 5-1/8" (100 130 ) Ø =, & 80 11 13 0 Ø 6 Extra Heavy Duty Adjustable Floor Leveler (Page
Payment Drops. Quality... Secure. Direct to you. Thru Wall Models. Walk-Up Models. Drive-Up Models 2009 PRODUCT CATALOG
Secure Payment Drops DRIVE-UP WALK-UP ON-WALL THRU-WALL Thru Wall Models Thru-Wall pages 8-13 Models pages 6-10 Walk-Up Walk-Up Models Models pages 14-25 pages 11-21 Drive-Up Models Models Drive-Up pages
Popular steel Atlas locker is available in a range of door options direct from stock with next day dispatch.
Popular steel Atlas locker is available in a range of door options direct from stock with next day dispatch. Atlas Range The Atlas locker is available in two popular depths - 300mm or 450mm, with a choice
STORAGE & MATERIAL HANDLING
www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now
UPDATED v6.1. Cargo Van Racks & Interior Equipment RAM 2017 PRODUCTS CATALOG
UPDATED.. v. Cargo Van Racks & Interior Equipment RAM 0 PRODUCTS CATALOG WWW.KARGOMASTER.COM 800--8 FOR COMPACT CARGO VANS 0 % LESS WEIGHT REDUCE OPERATING COSTS INCREASE PAYLOAD KARGO MASTER 800--8 KARGOMASTER.COM
Support Equipment. In This Section Mobile Ingredient Bins H Kettle Drainer H Rack/Tray Carts H
H SUPPORT EQUIPMENT Support Equipment In This Section Mobile Ingredient Bins H-1...198 Kettle Drainer H-2...199 Rack/Tray Carts H-3...200 Tray, Cup or Glass Rack Carts H-3-B...201 Cup & Glass Rack Carts
EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES
WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES PART 1 GENERAL 1.1 DESCRIPTION A. Work included: Entrance and vestibule
Tissue Boxes. Restroom. Intros Cube Tissue Box. Maxim World Stainless Steel Tissue Box. Maxim World Textured Tissue Box
Tissue Boxes Maxim World Stainless Steel Tissue Box # 60710009 Durable Heavy weight Classic stainless steel 12 L x 12 W x 13 H cm Intros Cube Tissue Box # 54600005 Price competitive Classic design stainless
FUEL STORAGE TRAILER ACCESSORIES
Ignition Oil/Gas Mixing Bottle 722-8303 $3.95-J Helps with accurate mixing of oil/gas in the proper ratios. Imperial and Metric measurements on the bottle. Great for all 2-Cycle engines! FUEL STORAGE TRAILER
Lever. Min-Max. Part# C /16-3/8 7-1, Standard. D3 DF71 5/16-3/8 7-1, Standard. C /8-1/2 A-1, Standard
Rev. 10-30-2002 Cargo Control Load Binders Ratchet Type L-140 Ratchet Part# Proof 1/8 CB 0140233 3/16 CB 0140323 Blu Krome Hi-Test 1/4 CB 0140423 CB 0181423 Lever Part# Anchor 1 Min-Max Type C7 1048128
Steel Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Each cabinet is fabricated from prime quality furniture grade cold rolled or type 304-4 or 316-4 stainless steel. All components are die formed, notched,
HSpecialties Inc. TABLE OF CONTENTS
TABLE OF CONTENTS Introduction... Curtain Track Selection Guide...2 Ordering COMPLETE Tracks...3 00 Series Standard-Duty Straight Track...4 200 Series Black Medium-Duty Straight Track...8 300 Series Standard-Duty
EA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in