www. automa.co.kr PNEUMATIC ACTUATOR T / F /
|
|
|
- Wilfred Randall
- 5 years ago
- Views:
Transcription
1 www. automa.co.kr PNEUMTIC CTUTOR T / F /
2 SCOTCH YOKE TYPE CTUTOR Design and Construction UTOM ctuator is designed for rotary type valve. UTOM provides various size of actuator, including heavy-duty actuator, to meet the customer's needs. UTOM is in accordance with NMUR and ISO Standard which enable us to fit with valves & accessories easily & simply. UTOM is specialized in providing a wide range of industrial solutions such as petrochemical, power generation, atomic power plant, steel mill, shipyard, refining, wastewater disposal, automation facilities and building air conditioner. Specification Operating Pressure Range : 4~7kg/cm : 4.5~7kg/cm Operating Temperature Range Cycle Life 1,300,000 Operating Rotating angle range INDEX Model Selection Guide D 1 D SCOTCH YOKE TYPE CTUTOR - D SERIES (DOUBLE CTING) - S SERIES (SINGLE CTING) - TECHNICL DT 07 RCK&PINION TYPE CTUTOR - DR SERIES (DOUBLE CTING) - SR SERIES (SINGLE CTING) - TECHNICL DT 11 HEVY-DUTY CTUTOR 1 ctuator Type D : (Scotch-Yoke Type) S : (Scotch-Yoke Type) DR : (Rack&Pinion Type) SR : (Rack&Pinion Type) ctuator Size D : 50/65/80/100/15/140/160/185/00/50/300 S : 50/65/80/100/15/140/160/185/00/50/300 DR : 3/40/50/65/80/90/100/115/15/140/160/185/00 SR : 40/50/65/80/90/100/115/15/140/160/185/00 Features The Side Direction - Side Handle - Middle Torque Spring - Strong Torque Spring The Top Direction - Position Indicator - Limit Switch Box - Proximity Sensor - E/P Positioner - Position Transmitter - Manual Lever Part List The Front Direction - Solenoid Valve (NMUR) - Lock Up Valve - Volume Booster - Direct Fitting ssembler 1. Body. Shaft 3. Crank 4. Bushing(Top) 5. Body O-ring(Top) 6. Shaft Roller(Top) 7. Bushing(Bottom) 8. Body O-ring(Bottom) 9. Shaft Roller(Bottom) 10. Body Washer(Bottom) 11. Body Washer(Top) 1. Body Snap-ring 13. Piston 14. Piston O-ring The Back Direction - Stopper Bolt The Bottom Direction - Valve Mounting - Manual Handle - ISO 511 DIN 3337 Square & Holes Piston Guide-ring 16. Piston Pin 17. Piston Roller 18. Piston Pad 19. Cover 0. Cover O-ring 1. Cover Bolt. Spring Cap 3. Spring 4. Stopper 5. Stopper Bolt 6. Stopper O-ring 7. Stopper Washer 8. Stopper Nut UTOM Scotch Yoke 03
3 D SERIES (DOUBLE CTING) S SERIES (SINGLE CTING) P D50~D00 PT 1/4" PT 1/4" D50, D300 #PT 3/8" #PT 1/" P S50~S00 PT 1/4" PT 1/4" S50, S300 #PT 3/8" #PT 1/" UTOM Scotch Yoke 04 MODEL K1 ISO P.C.D N-G DP(TP) K L T T1 H H1 CH DP D50 80 F03/F05/F07 36/50/70 4-M5/M6/M8 10/1/ D65 80 F05/F07 50/70 4-M6/M8 14/ D80 80 F M #14 14 #9.7 Ø #11.7 Ø17 #9.7 Ø #14.7 Ø19 0 D F07/F10 70/10 4-M8/M10 16/ #17.7 Ø D15 80 F07/F10 70/10 4-M8/M10 16/ D F10/F1 10/15 4-M10/M1 18/ # D F M #F10/F1 #10/15 #4-M10/M1 18/5 # D185 80/130 F M x D F M #F14 # D F M D F16/F5 165/54 4-M0/8-M16 30/ Weight (Kg) MODEL K1 ISO P.C.D N-G DP(TP) K L T T1 H H1 CH DP S50 80 F03/F05/F07 36/50/70 4-M5/M6/M8 10/1/ S65 80 F05/F07 50/70 4-M6/M8 14/ S80 80 F M # Option # Option #14 14 #9.7 Ø #11.7 Ø17 #9.7 Ø #14.7 Ø19 0 S F07/F10 70/10 4-M8/M10 16/ #17.7 Ø S15 80 F07/F10 70/10 4-M8/M10 16/ S F10/F1 10/15 4-M10/M1 18/ # S F M #F10/F1 #10/15 #4-M10/M1 18/5 # S185 80/130 F M x S F M #F14 # S F M S F16/F5 165/54 4-M0/8-M16 30/ Weight (Kg) UTOM Scotch Yoke 05 Torque Table D50 D65 D80 D100 D15 D140 4bar 4.5bar 5bar 6bar 7bar 4bar 4.5bar 5bar 6bar 7bar , , ,47.5 1,748.0, D , , , , ,805.0,13.3, ,50.0 1, ,900.0,51.5, D ,09.5 1,5.5 1, , , ,919.0,175.5, ,01.0 3, ,61.5, , , , D , ,66.5 1,85.5,3.0, ,43.0, , , , ,75.0 4, ,7.5 6,.5 7, D50 45,498.5,81.0 3, , , , , , , , ,73.0 8, , , , D , , , , , , , , ,4.0 15, , , , , ,63.5 1,539.0 Torque Table S50 S65 S80 S100 S15 S140 Spring Torque Middle Spring Torque Strong Spring Torque Middle Spring Torque Strong Spring ir to 4.5bar Spring ir to 6bar Spring IR to 4.5bar Spring IR to 6bar , S , , , , S , , ,06.5 1, ,681.5, S , , ,39.8 1, , , ,13.5 3, ,77.5 3, S ,54.0 1, ,738.5, ,43.0, ,315.5, ,41.0 4, , , S300 45,83.0,17.0 3,046.0, ,66.0 4, , ,
4 TECHNICL DT RCK&PINION TYPE CTUTOR Scotch-Yoke Type Features Upon air supply, pistons move horizontally, turning the shaft by the arm connected to the pistons. Smooth On/Off with the torque curve synchronized with valves. Relatively higher torque than the same model in Rack&Pinion Type. Torque Diagram luminum Cover Which is not easily peeled off, and its polish can last long as it is power coated upon special surface treatment. s there is no friction between metal to metal, product life is long and not noisy. ISO511/DIN3337 Which is the international standards and thus it can precisely be fitted with accessories such as limit switch box and so on. luminum Body annodized to prevent internal/external scratches and thus securing long term durability. UTOM Scotch Yoke 06 ctuator ir Consumption The air consumption of actuator is calculated by below. The air consumption is based on 1 action of used valve and do calculate the consumption per an hour. Operating Mechanism (Fail Last) ctuator (D Series) V = (+B)x(P+1.013)xN ctuator (S Series) V = x(p+1.013)xn ctuator V = ir Consumption (Liter) = Volume "" (Liter) B = Volume "B" (Liter) P = Pressure (Bar) N = Number of Operating B Spring Cap Which can enable it to assemble or disassemble safely. Part List NBR The products can be used at Low/High temperature as the products are available in EPDM and/or VITON in addition to the standard NBR. NMUR Which is the international standards and thus the products can be precisely fitted with solenoid valves UTOM Rack & Pinion 07 (Fail Close) (Fail Open) Model B Model (Fail Close) (Fail Open) D S D S D S D S D15.5. S D S D S D S D S D S Body. Shaft 3. Stopper 4. Bushing(Top) 5. Body O-ring(Top) 6. Bushing(Bottom) 7. Body O-ring(Bottom) 8. Body Washer(Bottom) 9. Body Washer(Top) 10. Body Snap-ring 11. Piston Piston O-ring 13. Piston Guide-ring 14. Piston Pad 15. Cover 16. Cover O-ring 17. Cover Bolt 18. Spring Unit 19. Stopper Bolt 0. Stopper O-ring 1. Stopper Washer. Stopper Nut
5 DR/SR SERIES (DOUBLE CTING/SIINGLE CTING) SR SERIES (SINGLE CTING) UTOM Rack & Pinion 08 MODEL ISO P.C.D N-G DP(TP) K L Weight (Kg) T T1 H H1 CH DP DR SR DR SR DR3 F M DR40 F03/F05 36/50 4-M5/M6 8/ DR50 F03/F05/F07 36/50/70 4-M5/M6/M8 10/1/ DR65 F05/F07 50/70 4-M6/M8 11/ DR80 F M DR90 F M DR100 F07/F10 70/10 4-M8/M10 16/ # DR115 F07/F10 70/10 4-M8/M10 16/ DR15 F07/F10 70/10 4-M8/M10 16/ DR140 F10/F1 10/15 4-M10/M1 18/ # DR160 F10/F1 10/15 4-M10/M1 18/ DR185 F M DR00 F M * DR3, 40 Have not angle stopper. Torque Table - DR Series K1 K P DR DR PT 1/8" DR50~DR DR185 80/ PT 1/4" DR Model 3bar 4bar 4.5bar 5bar 6bar 7bar DR DR DR DR DR DR DR DR DR DR DR DR ,15.8 DR , , ,38.3 1,615.0 # Option Torque Table - SR Series Model SR40 SR50 SR65 SR80 SR90 SR100 SR115 SR15 SR140 SR160 SR185 SR00 Spring Unit 3bar 4bar 4.5bar 5bar 6bar 7bar Spring S MS M WS WM , ,63.5 1, ,16.0 1, , , , UTOM Rack & Pinion 09
6 TECHNICL DT HEVY-DUTY CTUTOR Rack & Pinion Type Upon air supply, pistons move horizontally, turning the shaft that is linked to the piston gear. Short body length makes it easier to fit in small spaces. The multi-spring sturucture enables adjustment of number of springs to suit the site requirements. Torque Diagram MODEL Ø L L1 L H T S KEY Ød P.C.D ØB N-M ctuator ir Consumption ctuator D50D PT 3/8" T M0 D300D PT 3/8" T M16 D350D PT 1/" T M0 D400D PT 1/" T M0 UTOM Rack & Pinion 10 The air consumption of actuator is calculated by below. The air consumption is based on 1 action of used valve and do calculate the consumption per an hour. Operating mechanism (Fail Last) ctuator (DR Series) V = (+B)x(P+1.013)xN ctuator (SR Series) V = x(p+1.013)xn V = ir Consumption (Liter) = Volume "" (Liter) B = Volume "B" (Liter) P = Pressure (Bar) N = Number of Operating B MODEL Ø L L1 L H T S KEY Ød P.C.D ØB N-M S50D PT 3/8" T M0 S300D PT 3/8" T M16 D350D PT 1/" T M0 UTOM Heavy-Duty 11 (Fail Close) (Fail Open) Model B Model (Fail Close) (Fail Open) DR DR SR DR SR DR SR DR SR DR SR DR SR DR SR DR SR DR SR DR SR Torque Table 4bar 5bar 6bar 4bar 5bar 6bar Spring 0 4,00 5,00 6, ,170 1,810,350 1,300 D50D 45 3,100 3,800 4,600 S50D , ,00 5,00 6, ,800 1,980 1, ,740 15,000 18,300 0,400 3,650 4,800,550 D300D 45 5,600 7,000 8,400 S300D 45 1,180 1,850,500 1, ,100 1,400 14, ,760 3,160 4,600 3, ,000 1,600 8, ,650 6,800 8,900 3,650 D350D 45 9,600 11,600 13,700 S350D 45 1,450,600 3,700, ,000 17,800 0, ,330 3,00 5,50 5,00 0 1,600 9,100 38,600 D400D 45 1,950 15,650 18, ,900 4,000 7,650 ir Consumption Weight Model B Model (Fail Close) (Fail Open) Model (Double) Model (Single) D50D S50D D50D 150 S50D 0 D300D S300D D300D 00 S300D 60 D350D S350D D350D 350 S350D 80 D400D D400D 380 (Liter) (kg)
ARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat)
ARITA Position Indicator - The Top Direction - A. Position Indicator B. Limit Switch Box C. Proximity Sensor D. E/P Positioner E. Position Transmitter F. Manual Lever -Flat -Dome NAMUR Drive Shaft (Hexagon
Pneumatic actuator (A/R series)
Pneumatic actuator (A/R series) - Optimized for a ball/butterfly valves that open and close at an angle of 90. - Convenient since it can be mounted directly onto the valves or accessories in accordance
AVAILABLE MODELS AND SIZES SPECIFICATIONS
SPRINGS (Key 18) END CAP (Key 14) HOUSING (Key 1) INDICATOR CAP (Key 30) DRIVE SHAFT (Key 13) O-RING (Key 20) The Dyna-Flo D-Force actuator is a rugged dual piston scotch yoke actuator designed specifically
TOP-QUALITY PNEUMATIC ACTUATOR
TOP-QUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuators are designed using Scotch-Yoke technology from PDS 50 to the largest of PDS 200. Scotch-Yoke technology is
PNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
4. Pinion (Drive Shaft)
210 Series Pneumatic ctuators Technical Features of PROVL Pneumatic ctuators PROVL 210 Series actuators are designed to meet the demanding needs of todays process flow control requirements. Proval actuators
TOP-QUALITY PNEUMATIC ACTUATOR
TOPQUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuars are designed using ScotchYoke technology from PDS 50 the largest of PDS 200. ScotchYoke technology is well known
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
MTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
Heavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:00 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
Ea series sr & da pneumatic actuators
Ea series sr & da pneumatic actuators CONTENTS DESIGN ND FETURES Page 3 PRTS ND MTERIL Page 4 DIMENSIONL DRWINGS Page OPERTING PRINCIPLES Page LIMIT STOP DJUSTMENT Page DOULE CTING TORQUE TLE Page SPRING
Pneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
Heavy-Duty Pneumatic Actuator. IS & IC Series
Heavy-Duty Pneumatic Actuator BS EN ISO 9001:2000 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper
C Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
PNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
brochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
PNEUMATIC ACTUATOR HP-SERIES. Valve automation leader HKC. HCAG-HP-18 Rev.0
PNEUMATIC ACTUATOR SERIES 0045 Valve automation leader HKC HCAG8 Rev.0 Introduction series pneumatic actuators are specifically designed to respond to customers needs on the valve automation market. It
Installation & Operation Manual
Installation & Operation Manual (I-TORK PDS Series Pneumatic Actuator) PDS-M0108/1010 74-6, Chun Ui-Dong, Won Mi-Gu, Bucheon, Kyoung Ki-Do, Korea Tel : 82-2-855-1365, 66 Fax : 82-2-855-1367 E-mail : roy75@i-tork.com
R-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
Figure RP ACTUATORS PNEUMATIC RACK & PINION.
Figure RP ACTUATORS PNEUMATIC RACK & PINION www.fnw.com TORQUE RANGES The RP rack and pinion actuators are available with output torques ranging from 44 to 36,269 in-lbs depending on air supply pressure
Smart Positioner YT-2400L,R Installation manual
Installation Safety Warning When installing a positioner, please ensure to read and follow safety instruction. All input and supply pressure to valve, actuator, and other related devices must be turned
Pneumatic-Pneumatic Positioner YT-1200L,R Installation manual
Installation Safety Warning When installing a positioned, please ensure to read and follow safety instruction. All input and supply pressure to valve, actuator, and other related devices must be turned
Meridian TM EC and DRC Series. Pneumatic Actuators
Meridian TM EC and DRC Series Pneumatic Actuators The Meridian TM Pneumatic Actuator DRC Series Features & Benefits: The Meridian TM Pneumatic Actuator has proven to be the most reliable actuator by providing
SPN II Pneumatic Actuator
SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has an epoxy coated, hard anodized aluminum body and epoxy coated end caps Inside surface finish (Ra 0.4-0.6µm) to minimize
ANTI-BLOWOUT SYSTEM MOUNTING VARIATIONS. NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: UNI 6060:
4 5 1 2 6 8 7 3 92 1 2 3 NOMINL VLUES: Pressure rating max 115 PSI Temperature range: Pre lubricated for life of actuator on assembly From MOD. 52 up to 140 supply chambers MOD. 160-200-270 Standard polyester
The Series 3800 Rotary piston actuator are designed to operate rotary valves, such as Ball valves. Butterfly valves and Plug valves
Technical Bulletin A 380 Series 3800 Canted Scotch Yoke Actuator Series 3800 Features General The Series 3800 Rotary piston actuator are designed to operate rotary valves, such as Ball valves. Butterfly
KTM PNEUMATIC ACTUATORS AW, AWN SERIES (FOR LARGE SIZED VALVES)
Pneumatic actuator for large-sized valves, ideally suited for control valves and remotely controlling process lines FEATURES Scotch yoke construction ideal for large sized valves Two pistons in double
KTM Pneumatic Actuators AW, AWN series (for large sized valves)
Pneumatic actuator for large-sized valves, ideally suited for control valves and remotely controlling process lines Features Scotch yoke construction ideal for large sized valves Two pistons in double
Sanitary Clamp, Full Port, 3-way Ball Valves (3-A approved) FEATURES. FLOW PLANS L Port
30 Series Sanitary lamp, ull Port, 3-way all Valves (3- approved) 3- pproved for use in food processing and dairy applications Valve Pressure / Temperature 1000 The ssured utomation 30 Series 3- approved,
Pneumatic Actuator D Series, Three Position
45 www.injoyindustry.com Feature D series of pneumatic rack & pinion actuator is designed on the basis of C series pneumatic actuator, displacing the complicated electronic control by simple mechanical
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
GVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques to 27,624 lb.in. INTRODUCTION
VLVS & CONTROLS KYSTON PNUMTIC CTUTOR Spring Return and ouble cting Pneumatic Quarter-Turn ctuators For Output Torques to 27,624 lb.in. INTROUCTION For remote control of any quarter-turn application, including
Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
Full 316SS design Up to 70,000Nm in DA! High Temp ** Low Temp ** No Painting or ENP coating required ISO mounting NAMUR VDI/VDE
1 Full 316SS design Up to 70,000Nm in DA! High Temp ** Low Temp ** No Painting or ENP coating required ISO mounting NAMUR VDI/VDE Mineral Processing Oil and Gas Petro-chemical Desalination Coal washery
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
jamesbury Bulletin A107-1 Issue 7/2006
1-SERIES PNEUMTIC CYLINDER CTUTORS 1-Series piston actuators are available in either doubleacting or spring-return versions. The Series 1C and 1J provide for mounting in accordance with ISO 5211/1. These
ACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
NSF Series Scotch Yoke Type Pneumatic & Hydraulic Actuator NUTORK CORPORATION
Actuators & Valves NSF Series Scotch Yoke Type Pneumatic & Hydraulic Actuator Pneumatic Actuator Single Acting Type Pneumatic Actuator Double Acting Type Hydraulic Actuator Single Acting Type NUTORK CORPORATION
KTM PNEUMATIC ACTUATORS AK SERIES (FOR SMALL AND MIDDLE SIZED VALVES)
Compact and light-weight actuator, equipped with a guide rod for smooth operation and extended durability FEATURES Double acting and single acting type are of the same shape and dimension Double rack and
Morin series B and C actuators. Series C
MORIN series - Ductile iron w/ stainless steel cylinders C series - Ductile iron w/ carbon steel cylinders Spring return and double acting actuators Quarter-turn output torques to 158200 Nm Features and
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
KTM PNEUMATIC ACTUATORS AK SERIES (FOR SMALL AND MIDDLE SIZED VALVES)
Compact and light-weight actuator, equipped with a guide rod for smooth operation and extended durability FEATURES Double acting and single acting type are of the same shape and dimension Double rack and
POSI-SEAL HIGH PERFORMANCE BUTTERFLY VALVE CONTROL PACKAGE
POSI-SEAL HIGH PERFORMANCE BUTTERFLY VALVE CONTROL PACKAGE Performance & Reliability Fisher puts it all together for you in the POSI-SEAL Package (PSP). With the introduction of the POSI-SEAL Package (PSP),
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Scotch Yoke Actuators Spring return - Double acting
Scotch Yoke Actuators Spring return - Double acting 2 Econ Scotch Yoke actuators Scotch Yoke actuators Fig. 7991 Spring return - Fig. 7992 Double acting Proven quality since 1892 Econ has been offering
PNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR series RA SERVOVALVE spa Via Quasimodo 27-20010 S.STEFANO TICINO (MI) PHONE: 0039-029748461 FAX: 0039-0297484646 E-mail: servovalve@servovalve.it RA Rev. 0/15 SERIES RA
RC200. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Established Leaders in Valve Actuation. Fluid Power Actuators and Control Systems
Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation RC200 Compact Scotch-Yoke Actuators for Quarter-Turn Valves PUB014-001-00 Issue 08/10 Rotork Actuators Quality Controlled
Keystone PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves Features General application The
AS-Interface Installation Manual. ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems
AS-Interface Installation Manual Page 1 of 9 Rev A April 16, 2003 ASAHI / AMERICA, Inc. Thermoplastic Valves and Piping Systems 35 GREEN STREET PO BOX 653 MALDEN, MA. 02148 AS-Interface Installation Manual
HEAVY DUTY WORM GEARBOX MODEL SBWG
FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material
Rack & Pinion ACTUATORS S
Rack & Pinion ACTUATORS S Double Acting & Spring Return Rack & Pinion Pneumatic Actuators HIGH PERFORMANCE MODEL S FEATURES Minimum of 50 microns of Aluminum Hard Anodized Actuator Housing surface to provide
Double acting pneumatic actuators. ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics. ACTAIR 100 and 200: scotch -yoke kinematics
Technical leaflet 8515.1/3--10 ACTAIR 1.5 to 800 Double acting ACTAIR 1.5, 3, 6, 12, 25 and 50: rack and pinion kinematics ACTAIR 100 and 200: scotch -yoke kinematics ACTAIR 400 and 800: yoke AMRI patented
Pneumatic Actuators New AD and AS (Sizes 0025 to 0350)
Pneumatic Actuators New AD and AS (Sizes 0025 to 0350) APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide
Pneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
SY Series Scotch Yoke Actuators
SY Series Scotch Yoke Actuators Engineering Creative Solutions for Fluid Systems Since 1901 FEATURES MODULAR DESIGN The Pratt Industrial SY series scotch yoke actuator has a highly efficient and interchangeable
flowserve.com Limitorque LRP Limitorque Rack & Pinion Pneumatic Actuator
flowserve.com Limitorque LRP Limitorque Rack & Pinion Pneumatic Actuator 1 LRP Limitorque Rack and Pinion Actuator Series Limitorque is the brand customers trust when safe, reliable and robust valve automation
RCI200. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Established Leaders in Valve Actuation. Fluid Power Actuators and Control Systems
Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation RCI200 Compact Scotch-Yoke Actuators for Quarter-Turn Valves PUB014-002-00 Issue 08/10 Rotork Actuators Quality Controlled
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
HYDRAULIC ACTUATORS EC-SERIES. ELFORCONTROLS Actuators and Valves Automation
HYDRAULIC ACTUATORS EC-SERIES ELFORCONTROLS Actuators and Valves Automation HISTORY Elfor Controls, established in the last 70 s, is an Italian company specialized in engineering and manufacturing of a
BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
Double acting pneumatic actuators. ACTAIR 1.5, 3, 6, 12, 25 and 50 : rack and pinion kinematics. ACTAIR 100 and 200 : scotch -yoke kinematics
Type series booklet 8515.1/8--10 Double acting pneumatic actuators ACTAIR 1.5, 3, 6, 12, 25 and 50 : rack and pinion kinematics ACTAIR 100 and 200 : scotch -yoke kinematics ACTAIR 400, 800 and 1600 : yoke
Morin Figure HP Actuator
1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates
G Type Range of Actuators
G Type Range of Actuators Installation & Operation Instruction Manual Heavy Duty Scotch Yoke Pneumatic & Hydraulic Actuators Head Office and Factory: Sferova s.r.l Via delle Industrie, 30/32 I-20050 Sulbiate
Double Acting (air to air) and Single Acting (spring return), 90 operation, pneumatic actuators.
Double Acting (air to air) and Single Acting (spring return), 90 operation, pneumatic actuators. General Applications For remote control of any quarter turn application, for example Ball, Butterfly or
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
Automation is the techniques and equipment used to achieve automatic operation or control.
VALVE AUTOMATION What is Automation? Automation is the techniques and equipment used to achieve automatic operation or control. Automation is an automatic operation and control of machinery or processes
RCI200 Range. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Redefining Flow Control
RCI200 Range Compact Scotch-Yoke Actuators for Quarter-Turn Valves Redefining Flow Control Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
NSF Series Pneumatic & Hydraulic Actuators. Installation & Operation Instruction Manual NUTORK CORPORATION
NSF Series Pneumatic & Hydraulic Actuators Installation & Operation Instruction Manual NUTORK CORPORATION Index Description 1. Summarize 2. Working Conditions & Application 3. Technical Data 4. Installation,
CVS Rack and Pinion Pneumatic Actuator
Instruction Manual CVS Rack and Pinion Pneumatic Actuator Introduction These instructions apply specifically to the CVS Rack and Pinion pneumatic actuator. This manual provides sizing, maintenance, operation,
Operation Manual For KITZ B Series Pneumatic Valve Actuators
Operation Manual For KITZ B Series Pneumatic Valve Actuators Thank you for choosing KITZ products. For safe and trouble-free function and performance of the product, ensure to read and understand all items
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
RC200 Range. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Redefining Flow Control
RC200 Range Compact Scotch-Yoke Actuators for Quarter-Turn Valves Redefining Flow Control Rotork Actuators Quality Controlled Since the company was founded in 1957, Rotork has become the standard for excellence
SCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
Flowbus Corporation General Presentation
Flowbus Corporation General Presentation About us: We are process valve control and safety specialist Establishment in 2004 Mission - As a control and safety specialist, provide Ultimate safety and reliability
Spring return pneumatic actuators. DYNACTAIR 1.5, 3, 6, 12 and 25 : rack and pinion kinematics. DYNACTAIR 50 and 100 : scotch -yoke kinematics
Type series booklet 8511.1/6--10 DYNACTAIR 1.5 to 800 Spring return pneumatic actuators DYNACTAIR 1.5, 3, 6, 12 and 25 : rack and pinion kinematics DYNACTAIR 50 and 100 : scotch -yoke kinematics DYNACTAIR
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
range to scotch-yoke pneumatic & hydraulic actuators, rack and pinion actuators and relevant control systems.
Company Profile History Elfor Controls, established in the last 70 s, is an Italian company specialized in engineering and manufacturing a complete range of valves actuators and related accessories. The
AIR TORQUE HEAVY DUTY. AT-HD Series. Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design
AIR TORQUE HEAVY DUTY AT-HD Series Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design The COMPANY With over 20 years of experience in engineering and manufacturing
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
SQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such
BULLTIN B PISTON ACTUATOR. The Actuator that Delivers Maximum Torque for Minimum Air Consumption
BULLTIN B60 PISTON ACTUATOR The Actuator that Delivers Maximum Torque for Minimum Air Consumption TABLE OF CONTENTS: COMPACT DESIGN PRINCIPLE OF OPERATION PARTS LIST MAIN FEATURES TORQUEMETRIC TORQUEIMPERIAL
KF Contromatics Series PA/PAS M5 Pneumatic Actuators
The KF Contromatics M5 series rack-and-pinion actuator is the most versatile unit available today. All are rated for 150 PSIG inlet pressure and offer the DLS feature of double limit stops as standard
BFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
CATALOGUE+PRICELIST ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 ACG AUTOMATION CENTER GERMANY GMBH & CO. KG
CATALOGUE+PRICELIST 2.011 ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 DESIGN AND STRUCTURE Design and structure Our newly-designed AC-A Series Pneumatic Actuator is aluminum rack & pinion actuators in
WAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT
ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem
CSY SERIES. Pneumatic Rotary. Actuator. Double-Acting or Spring-Return Torques up to 2,500,000 in-lb Modular Design
CSY SERIES Pneumatic Rotary Actuator Designed & engineered for severe-service applications Double-Acting or -Return Torques up to 2,500,000 in-lb Modular Design Design & Materials NAMUR Mounting Allows
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
Chapter 11: Valves and Actuators with the NAMUR-interface
Right of authorship: the content of the training (wording, drawings, pictures) are owned by the author. Any utilization except for individual use is allowed only after permission of the author. Valves
Pneumatic Rack & Pinion Actuator
Pneumatic Rack & Pinion Actuator 4120 N.E. Columbia Blvd. Portland Oregon USA 97211 Phone: 503-287-8383 Fax: 503-281-9677 www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds