THINK PARTS THINK TORNOS SWISS GT 26. The solution for production of turned workpieces up to 25.4 mm in diameter.

Transcription

1 THINK PARTS THINK TORNOS SWISS GT 26 The solution for production of turned workpieces up to 25.4 mm in diameter.

2 2 Swiss GT 26

3 ENDLESS FLEXIBILITY Next Challenge, please! Versatile, high-performance, capable of operating with or without a guide bush and performing operations with high added value, the Swiss GT 26 is a machining solution that offers standard equipment at a competitive price. Swiss GT 26 3

4 SWISS GT 26 Flexibility Up to 39 tools, including 16 rotating tools. Rapid movement of axes up to 32 m / min. The Y axis offers greatly increased machining capability in counter operations. Modular machining area allowing the user to use a wide range of rotating tools attachement according to the needs of the part. Productivity 5 or 6 linear axes. Bar turning and reworking machining operations happen simultaneously, to ensure optimal productivity. The liquid-cooled motorised guide bush offers exceptional precision and allows the spindles to run at maximum speed (10,000 rpm). 4 Swiss GT 26

5 SWISS GT 26 Performance Machine features a rich equipment. Liquid-cooled built-in motorised guide bush with synchronous motor. Works with or without a guide bush. Swiss GT 26 features the most powerful spindle and driven tool in its class. Ergonomy Central lubrication unit. Machine offers a high level of autonomy. The swarf container can be emptied while the machine is running. Large machining area allowing an easy access to the tools. Numerical control on swivel arm. Swiss GT 26 5

6 EQUIPMENT Deep drilling Polygon operation 2-bore base for drill holder intended for deep drilling. Mounted on the counter spindle carriage. Minimum drilling length : 160 mm. Includes a connector for high-precision coolant. Polygon unit max rpm Polygon tool Ø 80 mm 6 Swiss GT 26

7 EQUIPMENT Turning Milling ESX20 drilling / milling spindle (offset 6 mm) ESX20 drilling / milling spindle (offset 15 mm) Rotating spindle for milling (63 mm saw) Swiss GT 26 7

8 EQUIPMENT Thread-whirling Inclined drilling / milling Double drilling / milling unit Thread-whirling unit Max rpm Angle ± 25 Ø max. 10 mm Inclined drilling / milling device 8 Swiss GT 26

9 EXTRAORDINARY VERSATILITY Swiss GT 26 / 5 Swiss GT 26 / 6 5 or 6 axes The 5-axis version is based on proven kinematics. The 6-axis version can be equipped with 4 addition tools for counter operation to boost the turning machine s ability to perform complex operations. This version no longer requires mechanical adjustment of the Y axis tools. Operation with or without guide bush Option to switch between operation with orwithout the guide bush, and therefore to select the system best suited to the workpiece being machined. Depending on the workpiece requirements, the bar quality may be lower and the bar remnants shorter. The conversion takes place in less than 30 minutes, on both 5-axis and 6-axis versions Support for guide bush, no disconnection of wiring Swiss GT 26 9

10 EXCEPTIONAL MACHINING PERFORMANCE X1 Y1 Y4 Z1 Z4 X4 Up to 39 tools, including 16 rotating tools On the 5-axis version, the Gamma can be fitted with up to 35 tools, including 16 that can be driven, and the 6-axis version adds 4 fixed tools, bringing the total capacity to 39 tools. The rotating tools on the rear platten and the counter operation station are adjustable. 10 Swiss GT 26

11 TISIS : PROGRAMMING AND COMMUNICATING WITH YOUR SWISS GT 26 MACHINE Programming your Swiss GT 26 Position your tools interactively Transfer your programs via your computer network* Monitoring* 2D simulation of the tool path * Requires the connectivity pack Swiss GT 26 11

12 HIGH PRECISION Aluminium External diameter : Ø 20 mm Workpiece length : 60 mm Stainless steel External diameter : Ø 16 mm Workpiece length : 49 mm Stainless steel External diameter : Ø 8 mm Workpiece length : 110 mm Steel External diameter : Ø 15 mm Workpiece length : 12 mm Titanium External diameter : Ø 5 mm Workpiece length : 8 mm Stainless steel External diameter : Ø 8 mm Workpiece length : 30 mm 12 Swiss GT 26

13 GENERAL SPECIFICATIONS Height 2,030 m Width 1,270 m Length 2,710 m GENERAL SPECIFICATIONS SWISS GT 26 Max. length mm 2710 Max. width mm 1270 Height mm 2030 Weight kg 3550 Cutting oil tray capacity l 200 Coolant pump power kw 0,44 Colours RAL 9006 grey, RAL 9011 black CE / CEM certified Swiss GT 26 13

14 SWISS GT 26 AND ROBOBAR SBF 326 TECHNICAL SPECIFICATIONS SWISS GT 26 / 6 SWISS GT 26 / 5 6 linear axes + 2 C-axis 5 linear axes + 2 C-axis 2 independent tool systems 2 independent tool systems Main spindle Max. bar capacity mm 25,4 25,4 Standard workpiece length with rotating guide bush mm Spindle rotation speed rpm Spindle power kw 9,5 (11) 9,5 (11) Max. constant torque Nm 12,1 (15,8) 12,1 (15,8) Spindle stoppage time rpm sec. 0,4 0,4 Platten Number of rotating tool positions on guide bush 9 9 Turning tool section 16 x x 16 Number of frontal tools (op/ cop) 5 /(5) 5 /(5) Positions for rotating tools (S11) 4 4 Positions for rotating tools (S21 modular positions) 3 3 Rotating tool speed of rotation rpm 5000 (2500) 5000 (2500) Rotating tool power (S11/ S21) kw 0,75 / 1 0,75 / 1 Counter spindle Max. bar capacity mm 25,4 25,4 Insertion length of workpiece into spindle mm Spindle rotation speed rpm Spindle power kw 9,5 (11) 9,5 (11) Max. constant torque Nm 12,1 (15,8) 12,1 (15,8) Stoppage time rpm sec. 0,4 0,4 Position next to the spindle for spindle machining Swiss GT 26

15 TECHNICAL CHARACTERISTICS TECHNICAL SPECIFICATIONS SWISS GT 26 / 6 SWISS GT 26 / 5 Counter operation Number of tool positions 8 4 Positions for rotating tools 4 4 Rotating tool speed of rotation t / min Rotating tool power kw 0,75 0,75 Max. total number of tools (with maximum options) Operation / counter-operation tool distribution 26 / / 9 BASIC MACHINE EQUIPMENT Rotating guide bush with integrated motor X X S21 rear platten rotating tool motor X X S11 front platten rotating tool motor X X C1 + C4 axes X X Interpolation in polar coordinates Option Option Pneumatic workpiece ejector + oil cleaning of collet X X Automatic centralised lubrication cycle X X Beacon (4 colour) X X 20 bar lubrication pump with manual selection filters X X Bar feeder interface X X Fire extinguisher interface X X TISIS programming software Option Option NUMERICAL CONTROL Control type Fanuc 31iB Fanuc 31iB Encoder/axis motor technique Absolute serial Absolute serial Motor type (axes and spindles) Synchronous (AC) Synchronous (AC) Colour screen and mobile operator console PROGRAMMING SOFTWARE ISO language code C, TMI TECHNICAL CHARACTERISTICS ROBOBAR SBF 326e Min. barstock dia. mm 3 Max. barstock dia without preparation mm 22 with preparation mm 25.4 (1 ) System Hydrodynamic / guide channels Round, hexagonal and square bar change-over Yes, yes, no Bar length 3 m, 12, 4 m Loading side Left Bar remnant extraction From rear Loading capacity 260 mm - bars Ø 10 mm Change over time 10 min Adjustable guide steady Yes, manual Complies with CE / CEM standards Yes Anti-vibration guide behind the spindle Yes Weight 3 m 520 kg kg 4 m 680 kg Swiss GT 26 15

16 TORNOS S.A. Rue Industrielle 111 CH Moutier Tel. +41 (0) Fax +41 (0) contact@tornos.com TORNOS TECHNOLOGIES DEUTSCHLAND GmbH Karlsruher Str. 38 D Pforzheim Tel. +49 (0)7231 / Fax +49 (0)7231 / contact@tornos.de TORNOS TECHNOLOGIES FRANCE Boîte postale 330 St-Pierre en Faucigny F La Roche s / Foron Cedex Tel. +33 (0) Fax +33 (0) france.contact@tornos.com TORNOS TECHNOLOGIES IBÉRICA Pol. Ind. El Congost Avda. St Julià, 206 Nave 8 E Granollers Tel Fax comercial.tti@tornos.com TORNOS TECHNOLOGIES ITALIA SRL Via Cesare Pavese 21 I Opera / MI Tel Fax italia.contact@tornos.com TORNOS TECHNOLOGIES US CORPORATION 840 Parkview Boulevard US - Lombard, IL Tel Fax info-us@tornos.com TORNOS TECHNOLOGIES UK LTD Tornos House Whitwick Business Park Coalville UK - Leicestershire LE67 4JQ Tel. +44 (0) Fax +44 (0) sales@tornos.co.uk TORNOS TECHNOLOGIES POLAND Sp. z o.o. Ul. Spółdzielcza Kąty Wrocławskie Poland Tel Fax poland.contact@tornos.com TORNOS TECHNOLOGIES (Shanghai) LTD Hui Feng Creativity Garden Feng Yu Building, 1-2F No. 239, Xitai Rd, Xu Hui District CN - Shanghai Tel Fax china.contact@tornos.com TORNOS BEIJING OFFICE Rm.1706, Tower A Dongyu Office Building Jia #1 Shuguang Xili Chaoyang District CN - Beijing Tel Fax beijing.contact@tornos.com TORNOS S.A. THAILAND REPRESENTATIVE OFFICE 7th Floor, 19, Bangna -Trad Soi 34, Bangna -Trad KM. 3 Road. Bangna, Bangkok, Thailand Tel Fax thailand.contact@tornos.com TORNOS TECHNOLOGIES ASIA LTD MALAYSIA REPRESENTATIVE OFFICE No , Ground Floor & , First Floor, One Terrace Plus, Tingkat Mahsuri 4, Bayan Lepas, PENANG, MALAYSIA Tel / Fax malaysia.contact@tornos.com Conforms to the European CE / CEM Safety Standards This document is based on information available at the time of publication. While every effort has been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware and software, nor to provide for every possible contingency in connection with installation, operation and maintenance. TORNOS S.A. assumes no obligation of notice to holders of this document with respect to changes subsequently made. TORNOS S.A. makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency or usefulness of the information contained herein. No warranties of merchantability nor fitness for purpose shall apply. Edition August 2014 Tornos 2014, all rights reserved cm