891/2 Series. Description. Applications. Standards MIL-C 5015 G, class K NFL 54140

Transcription

1 Applications Aircraft engines High temperature applications tandards IC 5015 G, class NF Description crew coupling High temperature connector for severe environment Fire resistant and fire wall High level of shock and vibration Thermocouple contacts available except hermetic class tainless steel shells Hermetic version available with male contacts only Characteristics echanical All 89 series connectors listed below are interchangeable and intermateable with other connectors conforming to IC5015G, class. connector series temperature range fireproof with selflocking number of operations thread plating interfacial sealing standard C yes yes 500 on plug yes standard C yes yes 500 on plug yes C yes yes 500 on plug no (EC.004) special 891* C yes no 3000 plug and yes receptacle special 892* C yes no 3000 plug and yes receptacle * Only available on special request Firewall and fireproof tests 891, 892 and (EC.004) series, comply with the following specifications : NF 54140, AIR 8467, test 14 IC 5015G class EC and EC 000 Electrical aximum current rating per contact : contact temperature (ax.) C 175 C 260 C Dielectric withstanding voltage : service at ground level at 21,000 meters (approx feet) inst 1000 Vrms 260 Vrms A 00 Vrms 360 Vrms D 00 Vrms 400 Vrms E 3500 Vrms 440 Vrms Insulation resistance (at 500 Vdc) : at normal temperature Ω 146 Ordering information : 891/2 connectors without backfittings 891/2 hermetic connectors basic series N sub series shell style class shell 10,,,,,,,, or contact layouts see table p 150 contacts polarization 10 C 60 C standard connector 00 square flange receptacle with thread for backfittings 02 square flange receptacle without thread for backfittings 07 jam nut receptacle (on request) 06 plug without selflocking 26 plug with selflocking hermetic connectors 01 solder fixing receptacle 02 square flange receptacle 05 large flange, solder fixing receptacle fire resistant (standard) Hhermetic Pmale female N (normal), W, X, Y, Z see table p 151 connector without contacts

2 891/2 connectors with backfittings basic series F 14 P N sub series 1 0 C C shell style type of backfitting 00 square flange receptacle 07 jam nut receptacle (on request) 26 plug with selflocking 06 plug without selflocking Astraight adapter Celbow adapter (on request) Esimple backnut (may be fitted onto A or C)* Fcable clamp (may be fitted onto A or C)* shell 10,,,,,,,, or contact layouts see table p 150 contacts Pmale female polarization N (normal), W, X, Y, Z see table p 151 connectors without contacts 892 suffix 04 connectors with backfittings (including types corresponding to EC & PAN nos.) basic series E P N 04 sub series shell style type of backfitting 60 C 00 square flange receptacle 26 selflocking plug no backfitting Awith straight adapter Cwith elbow adapter (on request) Ewith simple backnut Fwith cable clamp shell 10,,,,,,,, or contact layouts see table p 150 (note : some arrangements are not included in RollsRoyce JD 1371 spec.) contacts Pmale female polarization N (normal), W, X, Y, Z see table p compulsory digits EC.004 specification connectors supplied without contacts (compulsory) As above but RollsRoyce EC part nos. RollsRoyce connector specifications specification number shell style type of backfitting Asquare flange receptacle selflocking plug Ono backfitting Awith simple backnut with straight cable clamp Dwith straight adapter Ewith elbow adapter (on request) EC. 004 A P N shell 10,,,,,,,, or contact layouts see table p 150 (note : some arrangements are not included in RollsRoyce JD 1371 spec.) contacts Pmale female polarization N (normal), W, X, Y, Z see table p 151 Note : contacts are not supplied with these connectors 147

3 /2 eries Part number cross reference tables FCI ouriau 891 (0 C) series/ic 5015G classes & H IC eries II IC Plugs/receptacles with contacts description FCI ouriau part number IC 5015G class IC eries II square flange receptacle P P plug without self locking P P plug with self locking P P jam nut receptacle P square flange receptacle P Contacts description FCI ouriau part number IC pin pin pin socket. short C socket. long C socket socket Hermetic receptacles description FCI ouriau part number IC 5015G class H solder mounting H... P square flange receptacle H... P 3142 H...C...P solder mounting H... P 3143 H...C...P FCI ouriau 892 (260 C) series / IC 5015G classes & H Plugs/receptacles with contacts description FCI ouriau part number IC 5015G class square flange receptacle plug without self locking plug with self locking jam nut receptacle square flange receptacle Hermetic receptacles P P P P P P P P description FCI ouriau part number IC5015G class H solder mounting H... P square flange receptacle H... P 3142 H...C...P solder mounting H... P 3143 H...C...P Accessories description FCI ouriau part number IC5015G sealing plugs A sealing plugs A sealing plugs insertion/extraction tool insertion/extraction tool extraction tool

4 FCI ouriau 891 (0 C) series / NF class 1 (France) 892 (260 C) series / NF class 2 (France) Plugs/receptacles with contacts description FCI ouriau part number NF square flange receptacle plug without self locking jam nut receptacle ackfittings description FCI ouriau part number NF back nut 8950 E... 9R... straight adapter 8950 A... 9RA... cable clamp 8950 F... 9RC... FCI ouriau 892 suffix 04(260 C) series / EC.004 (RollsRoyce) PAN 6434 (Panavia) Plugs/receptacles without contacts description FCI ouriau part number PAN 6434 EC.004 square flange receptacle EC.004 AO... plug with self locking EC.004 O... hermetic receptacle/solder flange H... 04* EC.004 CO... *on request Receptacles/plugs with end fittings, without contacts description FCI ouriau part number PAN 6434 EC.004 square flange receptacle with backnut E PAN 6434 CG... EC.004 AA... square flange receptacle with cable clamp F PAN 6434 CA... EC.004 A... square flange receptacle with straight adapter A PAN 6434 C... EC.004 AD... plug with straight adapter A PAN 6434 D... EC.004 D... plug with cable clamp F PAN 6434 DA... EC plug with elbow adapter C... 04* PAN 6434 DE... EC.004 E... *on request ackfittings description FCI ouriau part number PAN 6434 EC.004 back nut 8950.E... EC.004 OA... cable clamp 8950.F... EC.004 O... straight adapter 8950.A... EC.004 OD... elbow adapter 8950.C...* EC.004 OE... *on request Contacts description FCI ouriau part number PAN 6434 EC.004 pin, standard, A PAN 6434 PA EC.007 P pin, standard, A PAN 6434 P EC.007 PA pin, alumel, EC.007 P A pin, chromel, EC.007 P C socket, standard, short A PAN 6434 D EC.007 socket, standard, short PAN 6434 E socket, standard, long A PAN 6434 F EC.007 socket, standard, long PAN 6434 G socket, alumel, short, EC.007 A socket, alumel, long, EC.007 A socket, chromel, short EC.007 C socket, chromel, long EC.007 C 149

5 Contact layouts #.3 2#.2 4#.1 7#.11 2# # 10.4* 2#.5 5#.8* 5# 1#.5* 2#12.6 6#.11 5#12.7 3# 6#.* 3# #. #.12* 26#.27 14#.21 37#.29 17# 3#. 3#40 * these arrangements not available with EC.004 (FCI ouriau 892 suffix 04) part numbers these arrangements are available in hermetic receptacles 150

6 Polarization Z Y N X W shell contact orientation in degrees arrangement N W X Y Z tandard and thermocouple contacts (with colour bands) tandard contacts contact type wire 891 (0 C) series 892 (260 C) series (EC) series part n col. bands part n col. bands part n col. bands pin A blue/blue A blue/blue A blue/blue short socket blue/blue blue/blue A blue/blue long socket blue/blue blue/blue A blue/blue pin socket pin socket Contacts with reduced barrels contact type wire 891 (0 C) series 892 (260 C) series (EC) series part n col. bands part n col. bands part n col. bands pin A blue/green short socket A blue/green long socket A blue/green pecial contacts (long barrel with external cable dia. 3.3 mm) contact type wire 891 (0 C) series 892 (260 C) series (EC) series part n col. bands part n col. bands part n col. bands pin A blue/blue A blue/blue short socket A blue/blue A blue/blue long socket A blue/blue A blue/blue Thermocouple alumel contacts contact type wire 891 (0 C) series 892 (260 C) series (EC) series part n col. dot part n col. dot part n col. bands pin black black short socket black black long socket black black pin black black short socket black black long socket black black Thermocouple chromel contacts contact type wire 891 (0 C) series 892 (260 C) series (EC) series part n col. dot part n col. dot part n col. bands pin yellow yellow short socket yellow yellow long socket yellow yellow pin yellow yellow short socket yellow yellow long socket yellow yellow 151

7 Dimensions Plugs type 06 and type 26 thread V quare flange receptacles type 00 shell V / UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A : 5 /8 UNEF.2A for all types except RollsRoyce EC.004 connectors which have an 11 / UNEF.2A thread 152 Panel cutout ØA Thread V 4 holes ØC 4 holes ØT R D E panel shell N R T V / UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A : 5 /8 NEF.2A for all types except RollsRoyce EC.004 connectors which have an 11 / NEF.2A thread shell front of panel rear of panel A C D ax A C E ax

8 Jam nut receptacles type 07 Panel cutout C ØA Thread V ØT Ø quare flange receptacles type 02 D shell N T V / UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A / UNEF.2A shell A C D ax D min : 5 /8 UNEF.2A for all types except RollsRoyce EC.004 connectors which have an 11 / UNEF.2A thread W 4 holes ØT R R shell N R T W Panel cutout ØA 4 holes ØC D E panel shell front of panel rear of panel A C D ax A C E ax

9 Hermetic solder fixing recep. type 01H ØR ØQ shell N Q R Panel cutout Ø A solder shell A Hermetic square flange recep. type 02H V ØR 4 holes ØT (see table page 148) Q shell N Q R V Panel cutout ØA 4 holes ØC D panel shell front of panel rear of panel A C A C D ax

10 Hermetic solder fixing recep. type 05H ØR ØQ shell N Q R Panel cutout ØA imple backnuts Ø ØC traight cable clamps A older shell A shell part A ax C number 10/ E E E E E E E E : when using with (EC) connectors, 04 should be added to the backshell number e.g. 8950E14 ( 12 only) shell part number 10/ F F F 8950F 8950F 8950F 8950F 8950F : when using with (EC) connectors, 04 should be added to the backshell number e.g. 8950F14 ( 12 only) 155

11 traight adapters Elbow adapters thread allows fitting of simple backnuts, cable clamps and further adapters Ø Ø ØC ØC Parking receptacles F E thread allows fitting of simple backnuts, cable clamps and further adapters 4 holes Ø T 15 angle applies to shell s and G For dimension C, see tables above shell part ax C E ax number 10/ A A A A A A A A : when using with (EC) connectors, 04 should be added to the backshell number e.g. 8950E14 ( 12 only) shell part ax F ax G ax number 10/ : when using with (EC) connectors, 04 should be added to the backshell number e.g. 8950E14 ( 12 only) shell part shell part number number R etal protective caps Nuts for jam nut receptacles Gaskets for jam nut receptacles Gaskets for square flange receptacles R Common dimensions with square flange receptacle (page 152) temperature class temperature class temperature class temperature class