HYDRAULC SCRAP SHEAR TAURUS 500 tons
|
|
|
- Lisa Phelps
- 5 years ago
- Views:
Transcription
1 HYDRAULC SCRAP SHEAR TAURUS 500 tons 101 Schrottschere SM540NP D E 00.docx page 1 of 6 printed:
2 Technical / Commercial Information Hydraulic Scrap Shear Type TAURUS 500 t, SM 540NP D Year of construction: 1996 Condition: Totally revised 2017, conducted overhaul works see below Machine is constructed on a steel base plate and can placed without fundament Machine is transportable with 4 lateral, hydraulic supports Delivery incl. accessories: - HF Radio Control Available from exhibition "recycling aktiv " in Karlsruhe Low Price Guarantee 3 months Conducted overhaul works Dismounting of machine Transport to partner factory IUT in Poland Dismounting of machine, dismounting of both lids and of shear head Overlaying welding of shear head inside Overlaying welding of blade carriers To finish by milling of blade hub at blade carrier above and standard Replacing of blade carriers below and above, installation of new blades Replacing of the complete guides on the shear head and mobile blade carrier Inspection/replacing lubrication lines at the shear head Dismounting of clamps, overlaying welding and finish by milling Insertion of HARDOX plates in the tamp space Inspection of blade cylinders, tamp cylinder Assembling of blade standard Dismounting of lids right and left Replacing of hinges at lids and filling bed Overlaying welding of hinge supports at bed and turning-out Installing of new axis Replacing the HARDOX plating at most points on the inside of the lids and floor panels Reassembling of lid Manufacturing and installation 4 new cover cylinders Dismounting and overlaying welding and milling of feed block Installing of new piston rods of feed cylinder General inspection and overlaying welding Dismounting of rear panel, repair and reassembly Replacing of all filter cartridges Replacing of 2 high pressure valves RQM7-P6 Replacing of pilot valves at differential and fast release 101 Schrottschere SM540NP D E 00.docx page 2 of 6 printed:
3 Overhauling of 8 slide valve E5P4 Inspection, possibly replacing of pressure switch A 5000 and A 3000 Inspection, possibly replacing of level switch Replacing of valve connectors SVS-LED Replacing of coupling of HD-pumps, cooling circuit and servo control Inspection of electrical installation, partly replacing of electrical wires Replacing of TSX 171 with new processor TSX Micro Inspection of radio control New manufacturing of cabin Straightening, possibly replacing of ladders, stairs, casing and like that Cleaning the of the entire system General repair work during the inspection Total service of diesel engine IVECO 200 PS Completely painted Technical Data 1 Shear Ref. C 540P Cutting force: 5'000 kn (at 400 bar) Cut width: 800 mm (blade length 900 mm) Cut height: 620 mm Clamp force: 900 kn Number of shear strokes (empty): 4-5 min -1 Automatic lubrication: incl. 2 Pre-compression and feeding box Ref. SM Length: 6'000 mm Width open box: 2'500 mm Width closed box: 780 mm Height closed: 600 mm Number of cylinders left side: 2 Stk. Number of cylinders right side: 2 Stk. Lid force left side: 1'800 kn Lid force right side: 1'800 kn Feeding cylinder: 1'400 kn Automatic lubrication: not included 3 Hydraulic unit Motor of main drive Diesel: 1 piece Type: DEUTZ 1013 Drive power: 200 PS Main pumps LINDE: 2 pcs. Operation pressure: 360 bar 101 Schrottschere SM540NP D E 00.docx page 3 of 6 printed:
4 Servo control motor/pump: 1 piece Cooling motor/pump: 1 piece Fan motor: 2 pcs. Drive power: 0.75 kw Oil Filtration: 60 my Oil tank capacity: 2'700 litres Differential control of blade cylinder: incl. Quick unloading blade return: incl. Quick unloading feed cylinder: incl. 4 Electrical control Microprocessor: TSX (or compatible) Volt meter: incl. Ampere meter: incl. Limit switch position display: incl. Valve actuating display: incl. Cut refusal incl. (when in automatic mode the cut has not finished, the blade lifts up, the feed cylinder pushes forwarded a few inches and try the cut again. This procedure repeats until the blade contact the lower limit switch. Now the program runs again in the adjusted cut length.) Adjustment of cut length: incl. (from 150 mm to approx. 2.0 m, continuous) Changeover manual/automatic: incl. Briquetting: incl. (manual ejection) HF Radio Control: included! Operator's cabin: Length 1'500 mm Width: 1'500 mm Height: 2'200 mm 5 Output Mixed scrap: 8 11 t/h 6 Dimensions / Data Height: 4.0 m Width: 3.5 m Overall length: 14.0 m Total weight: 58 t 101 Schrottschere SM540NP D E 00.docx page 4 of 6 printed:
5 101 Schrottschere SM540NP D E 00.docx page 5 of 6 printed:
6 101 Schrottschere SM540NP D E 00.docx page 6 of 6 printed:
TAURUS SHEARS BALERS MODEL ACL 662 DP2L
TAURUS SHEARS BALERS MODEL ACL 662 DP2L CONTENT 1 OVERVIEW 2 SHEAR HEAD 3 SQUEEZE BOX 4 MAIN COMPRESSION 5 HYDRAULIC UNIT 6 POWER PACK 7 ELECTRONIC CONTROL UNIT 8 LIFTING JACKS + REAR STABILIZERS 9 OPERATOR
Stationary shear baler combinations
Stationary shear baler combinations 556-715 Scrap Processing & Recycling Equipment E-V1 2008 General description Unique company. Unique equipment... in terms of technology, innovation and quality. In a
Semi-mobile shear baler combinations. Scrap Processing & Recycling Equipment
Semi-mobile shear baler combinations Scrap Processing & Recycling Equipment E-V1 2008 General description Process your material where it is and not where your equipment is! In the world of scrap metal
EJC 417 A COMPACT TRUCK DESIGNED FOR THE MOST CHALLENGING WORK CAPACITY: 17 SHORT TONS (15.4 TONNES) TECHNICAL SPECIFICATION 2-3
2-3 EJC 417 TECHNICAL SPECIFICATION A COMPACT TRUCK DESIGNED FOR THE MOST CHALLENGING WORK CAPACITY: 17 SHORT TONS (.4 TONNES) Revision Date: /4/01 2-4 EJC 417 Main Dimensions 88 (2235) 8 (3) 11 (279)
Annex D Garback Truck Specifications. 9) Cabin: Note: in addition to each manufacturer standard features, the following must be included.
Annex D Garback Truck Specifications A- SOLID WASTE COLLECTION TRUCK WITH COMPACTOR : MIN. 6 m 3 1) Engine: 1.1 4 Cycle, Injection Pump, Water Cooled, Diesel Engine 1.2 No. Of Cylinders : 4 or 6 1.3 Max
MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m
MHL35 E MATERIAL HANDLER Specifications Standard Machine Weight Engine output Reach 75, lbs 34 t 215 hp 16 kw Up to 52.5 ft 16 m Features Fuel saving ECO & ECO+ operating modes enhance flexibility while
MHL340 E TECHNICAL DATA MHL 340
MHL340 E TECHNICAL DATA MHL 340 MHL340 E Technical Data TECHNICAL DATA OPERATING WEIGHT WITHOUT ATTACHMENTS MHL340 E MHL340 E FQC DIESEL ENGINE 28.0 t 29.5 t 28.0 t 31.8 t Manufacturer and model Deutz
Technical Specifications
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach
Sandvik TH320. General Arrangement
Technical Specification TH3-Revision 1 1/10 General Arrangement 65 96 in (2438) 179 in (4547) TH3 13 TH3 90 in (2286) 12 in (305) 54 in (1372) 358 in (9093) 174 in (44) 83 in (2108) 13 in (330) 87 in (2210)
Hydraulic Floor Systems
Hydraulic Floor Systems All over the world Hyva is well known for its tipping gears. But for some applications the principle of horizontal loading and unloading is preferred. This is the reason Hyva acquired
L45B VOLVO COMPACT WHEEL LOADER
VOLVO COMPACT WHEEL LOADER L45B Gross Power: SAE J1995 81/110 kw/hp Net Power: SAE J1349 73/99 kw/hp Operating Weight: 8,2-8,4 t Capacities: 1,3-2,5 m 3 High-performance, low environmental impact diesel
HF box power packs. dc box power packs for mobile applications
HF box power packs dc box power packs for mobile applications HF box power pack series Hydraulfunktion has more than 20 year successfully manufactured and constantly improved box type dc power packs. HF
Technical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (
MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.
MHL35 E TIER 4i MATERIAL HANDLER Specifications Operating weight 7,548-78,264 lbs (32 35.5 t) Engine output 214 hp (16 kw) Reach up to 52.5 ft (16 m) Features Fuel efficient high output engine with a reduction
ZL302C VOLVO COMPACT WHEEL LOADER
VOLVO COMPACT WHEEL LOADER ZL302C Gross Power: SAE J1995 22,5/31 kw/hp Net Power: SAE J1349 22/30 kw/hp Operating Weight: 2,1 t Bucket Capacities: 0,3-0,5 m 3 High-performance, low environmental impact
SANDVIK LH204 UNDERGROUND LOADER
UNDERGROUND LOADER Sandvik LH204 is designed to give maximum tramming capacity in narrow mining and tunneling applications. The hydrostatic drive system delivers high tractive effort for maximum penetration
Motor Grader. BG 240 T-5 (6x4) / BG 240 TA-5 (6x6)
Motor Grader BG 240 T-5 (6x4) / BG 240 TA-5 (6x6) BG 240 T-5 (6 x 4) BG 240 TA-5 (6 x 6) Drivers cab tiltable for easy service Hydrostatic front wheel drive as option available The BG 240 is one of the
Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary
Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb
EJC 430 READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC 430 WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK
EJC READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK POWERED WITH A DETROIT SERIES ENGINE MILITARY SPECIFICATION WIRING WILLIAMS OPERATING SPECIFICATION
EJC 430 TECHNICAL SPECIFICATION. Payload: 30 tons (27.3 tonnes) Dump box volume: 20.7 yd³ (15.3 m³) We are an ISO 9001 Registered Company EJC 430 1
EJC 430 1 EJC 430 TECHNICAL SPECIFICATION Payload: 30 tons (27.3 tonnes) Dump box volume:.7 yd³ (.3 m³) 02, EJC Loaders Division reserves the right to change this 2 EJC 430 General Arrangement 65 o 430
SANDVIK LH202 NARROW VEIN LOADER
SANDVIK LH202 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Sandvik LH202
Technical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the
Sandvik LH203 Technical Specification
2014-01-16 Technical Specification APPLICATIONS is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Capacities Tramming capacity 3 500
Presentation of LORENZ GmbH Anlagentechnik.
Presentation of LORENZ GmbH Anlagentechnik Company headquarters D-77948 Friesenheim Family-owned production centre Production centre Production in a building measuring 1600 m² Extensive machine park on
3/3-Way-Proportional Valve
3/3-Way-Proportional Valve Content Page General Description 1 Design 2 Function 2 Technical Data 3 Options 4 Dimensions 5 Accessories 6 Flow Curves 7 General Description This proportional valve in combination
TECHNICAL DATA TIMBER HANDLING MACHINES
TECHNICAL DATA TIMBER HANDLING MACHINES Timber handling machines mhl 334 f 115 kw 22 27 t mhl 354 f 160 kw 32 36.8 t up to 11 m up to 11.3 m Page 04 Page 08 02 mhl 364 f 190 kw 45 51 t mhl 350 f hd 160
HITACHI LX290E. engine rated power 228 kw / 306 HP. operating weight kg. bucket capacity m 3
HITACHI LX290E engine rated power 228 kw / 306 HP operating weight 21 455-23 075 kg bucket capacity 4.0-4.5 m 3 EQUIPMENT Engine Steering Make............................................. Isuzu Model........................................
335F L. Hydraulic Excavator 2017
335F L Hydraulic Excavator 2017 Engine Drive Engine Model Cat C7.1 ACERT Maximum Travel Speed 4.2/2.6 km/h 2.6/1.6 mph Gross Power SAE J1995 152 kw 204 hp Maximum Drawbar Pull 295 kn 66,319 lbf Net Power
PRESSURE REGULATOR. Lucifer EPP 4 - Basic. Description. Technical data
Description EPP 4 - Basic is an electropneumatic pressure regulator which, by means of an integrated electronic control system and pulse width modulated solenoid valves, controls the outlet pressure proportionally
Welcome to.
Welcome to www.dambis.com Basic facts about DAMBIS JSC (joint stock company) Dambis was founded in 1992; Employees - in year 2018 75; Turnover in 2016 : 2,9 million EUR; In 2017 : 3,5 million EUR EN ISO
PELIKAN 500 / 600 / 800 SERIES VERSIONS
500 / 600 / 800 SERIES VERSIONS MORE EFFICIENCY AND HIGH PERFORMANCE: THE NEW - the movable counterweight design enables the balance of the jib system to be improved across the whole working range reducing
SANDVIK LH514E MASS MINING LOADERS
SANDVIK LH514E MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH514E is a high capacity electric Load-Haul- Dump (LHD) developed specially for underground use. It emits very low noise and no exhaust
127mm ~ 273mm Seamless Tube Production Plant
ES-11223 127mm ~ 273mm Seamless Tube Production Plant Information about an exclusive method of pipe making Availability of equipment at the pipe rolling area in the manufacturing sequence of their production
Failure to comply with any of the instructions may be cause for the County to reject that bid.
Instructions to Bidders It is the purpose of this document to solicit bids for the County of Ashtabula, Ohio (herein referred to as the County) from vendors interested in providing a new steel compactor
TAURUS T-Line C&G Costruzioni Meccaniche
TAURUS T-Line C&G Costruzioni Meccaniche COMPACT STATIC KS SHEARS Compact static balers&shear consists of a singlepiece structure, in the rear part of the structure, on the opposite side of the shear frame,
Your solution for efficient work. Manure. spreaders
Your solution for efficient work Manure spreaders EM Premium* Stay Ahead To meet the growing expectations of Farmers we have created effective solutions in the form of EM Premium service package. We take
SANDVIK TH540 UNDERGROUND TRUCK
SANDVIK TH540 UNDERGROUND TRUCK TECHNICAL SPECIFICATION The Sandvik TH540 is a high performance 40 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health
Welcome to.
Welcome to www.dambis.com Basic facts about DAMBIS JSC (joint stock company) Dambis was founded in 1992; Employees - in year 2014 63; Turnover in 2012 : 3.5 million EUR; in 2013 : 4.1 million EUR; EN ISO
EQUIPMENT UPDATE NEW STOCK! Pty Ltd BRAND.
Metquip uip Rentals Rentals Pty Ltd ABN 26 095 120 175 Suppliers of Plant and Equipment to the Scrap Metal and Recycling Industry BRAND NEW STOCK! EQUIPMENT UPDATE www.metquip.com.au CABLE GRANULATION
Product Manual Waste Management Systems
Product Manual Waste Management Systems INFO@ 1 HPA Full-automatic Baler HPA horizontal paper/cardboard/plastic balers are applied for baling and automatic strapping of paper, cardboard (carton, OCC),
Specification: Tire Test Machine. 3M Diameter Drum OTR Tire Endurance Test Machine TJR-1-OTR(Y) 14/1
3M Diameter Drum OTR Tire Endurance Test Machine TJR--OTR(Y). Machine Type: TJR--OTR (Y) Used for OTR Tire Radial Endurance Test Machine Structure: Horizontal Machine Frame Position Number: Drum Diameter
PRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Cummins QSG1, Tier Net Power HP (1 kw) Reach standard optional '" (1. m) (stick pin) '8" (19.1
Truck Chassis Weights & Dimensions :
Truck Chassis Weights & Dimensions : KERAX 350.34 6X4 HD-WKP GVW Max. Body Length (W) Min. Body Length (W) Total Payload Chassis Cab Weight Front Load Distribution Rear Load Distribution Front Axle Max.
EJC EJC 522. Technical Specification. Payload: 20 tonnes (22 tons) Dump box volume (SAE): 10.2 m³ (13.4 yd³) ISO 9001:2000 FM 62442
EJC 522 1 EJC 522 Technical Specification Payload: tonnes (22 tons) Dump box volume (SAE):.2 m³ (13.4 yd³) 2 EJC 522 General Arrangement 65 83 96 in (2438) 90 in (2286) 179 in (4547) 13 358 in (9093) 174
Technical Specification HY76 Build 1999, Working hour 12127, Mileage km according to counters.
Technical Specification HY76 Build 1999, Working hour 12127, Mileage 33250 km according to counters. Drilling equipment for vertical drilling by use of cable tool percussion, direct mud circulation, reverse
Technical specification. Stabilizer WR 2000 XL
Technical specification Stabilizer WR 2000 XL Technical specification Working width max. Working depth * 1 Milling and mixing rotor Tool spacing Stabilizer WR 2000 XL 7 10 (2,400 mm) 0 20 (0 500 mm) 13
Height of safety canopy Height of dump box. Dumping angle 65. Standard box volume 10.2 m³ Dump box volume (SAE) m³
The Sandvik TH320 is a narrow 20 metric tonne hauler that fits in a 3 x 3 metre heading. Available with a standard forward facing, open operators compartment or an optional forward facing, fully enclosed
Spraymec 8100 VC. Features. Technical data sheet
Equipment includes options and extra equipment. Features Spraymec 8100 VC is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying in tunnel projects with variable
EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Pump unit GMZ-E
Pump unit GMZ-E Pump used to supply oil and grease from a barrel directly through a lid-hole or a bunghole. Technical data: Pump with bung-hole Pump with barrel lid Delivery volume per stroke: Pump element
EJC 65 UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) TECHNICAL SPECIFICATION 1-3
1-3 EJC 65 TECHNICAL SPECIFICATION UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) 1-4 EJC 65 Main Dimensions 65 EJC 65 1-5 SANDVIK TAMROCK EJC Loaders Division EJC 65 Specification Sheet January 1, 2000
DeltaBase 540 Technical Data Sheet
Release Date: May 10th, 2008 Page 1 of 7 PRODUCT OVERVIEW The DeltaBase 540 is a powerful and versatile Multipurpose drill rig. With the ability to perform coring, DTH drilling, rotary flush, auger drilling
Servo/Hydraulic Press Brake. HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT
Servo/Hydraulic Press Brake HD NT Series HD 8025 NT, HD 1303 NT, HD 1303L NT, HD 1703 NT, HD 1703L NT, HD 2204NT & HD 2204L NT The HD NT Series Press Brake An ultra-high precision, down-acting system featuring
EJC 30SX 1 EJC 30SX. Technical Specification. Payload: 33 tons (30 tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) ISO 9001:2000 FM 62442
EJC SX 1 EJC SX Technical Specification Payload: 33 tons ( tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) 2 EJC SX General Arrangement 65 2 in (2591) 96 in (2438) 96 in (2438) 195 in (4953) 13 358 in
Hydrema 922D 922D 2.55 DUMP TRUCKS. 2 / 900E-Serie
Hydrema 922D 922D 2.55 DUMP TRUCKS 2 / 900E-Serie HYDREMA 922D SERIES Versatile 20 T dump truck for terrain and road. The 922D Series is the obvious choice for soft, muddy terrain or for areas with sensitive
VARIO. VARIO Separation of fine dust particles. The VARIO series is particularly suitable for separation of fine dust.
VARIO VARIO Separation of fine dust particles The VARIO series is particularly suitable for separation of fine dust. The VARIO units are of modular construction in order to meet different requirements,
ZL502C VOLVO COMPACT WHEEL LOADER. Gross Power: SAE J / 56 kw/ hp Net Power: SAE J / 54 kw/ hp
VOLVO COMPACT WHEEL LOADER ZL502C Gross Power: SAE J1995 41/ 56 kw/ hp Net Power: SAE J1349 40/ 54 kw/ hp Operating Weight: 4,4-4,5 t Bucket Capacities: 0,7-1,3 m 3 High-performance, low environmental
MATERIAL HANDLER MHL360 F HD. Features. Specifications
MHL360 F HD MATERIAL HANDLER Features Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic functions
DL250 TECHNICAL DATA
DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
DL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
SANDVIK LH208L LOW PROFILE LOADER
SANDVIK LH208L LOW PROFILE LOADER TECHNICAL SPECIFICATION Sandvik LH208L is a 7.7 tonnes capacity underground low-profile LHD designed to work in low profile room and pillar mining and extra low profile
Ground bearing pressure 1.1 kg/cm 2 2 HS 855 HD
The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting
Engel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION
Engel Injection Molding Machine INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION CLAMP Clamp force US tons 90 Clamp opening force US tons 3.0 Clamp stroke (max.) inches 13.78 Mold height (min
Hydraulic Pump. General description. Hydraulic circuit diagram
Hydraulic Pump SYSTEM 2 General description The hydraulically actuated grease pump BEKA HAMAX System 2 is mainly used to lubricate hydraulic hammers or other construction machinery accessories. Due to
OPTIONS AUTOMATIC LUBRICATION SYSTEM
OPTIONS AUTOMATIC LUBRICATION SYSTEM The central lubrication of the axes modules consists of a small lubricant dispenser with progressive distributor with several exits. It is responsible for the automatic
Sandvik LH307 Technical Specification
Technical Specification APPLICATIONS is a 6,7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development work, mining and tunnelling construction.
Axial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces:
Axial piston variable pump A4VG Series 32 Europe RE-E 92003 Edition: 04.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit Size 28 to 125 Nominal pressure 400 bar Maximum pressure
5200 ITH Specifications and Features
2003 Specifications and Features 5200 ITH The 5200 is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure. This drill is unitized with an on board reciprocating
PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL1, Tier Final 3 HP (8 kw) Reach standard 9'1" (18 m) optional 7'" (3 m) Operating
MATERIAL HANDLER MHL340 D. Features. Specifications
MHL340 D MATERIAL HANDLER Specifications Operating Weight Engine Output Reach 60,627-63,934 lbs 171 hp Up to 44.9 ft Features With its long reach and high lifting capacities, the MHL340 D from Terex Fuchs
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
320F L Hydraulic Excavator Specifications
Engine Engine Model Cat C4.4 ACERT Engine Power SAE J1995 122 kw 164 hp Net Power SAE J1349 120 kw 161 hp Engine rpm Operation Travel 1,800 rpm 1,800 rpm Bore 105 mm 4.13 in Stroke 127 mm 5.00 in Displacement
Horizontal Directional Drilling Rigs t
Made in Germany Horizontal Directional Drilling Rigs 30-100 t HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialised in Horizontal
TRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.
TRACKED EXCAVATOR JS370 LONG REACH Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.79m 3 STATIC DIMENSIONS I E H M N J F K L G C D A B Illustration shows optional
Second hand and demonstration machines at MADO
Second hand and demonstration machines at MADO ULTRA 4 Industrial Grinder MEW 727-II M G160 30,0/35,0 kw, 9,0/11,0 kw 125 A inert complete with 5 pcs. cutting set G160, lifting device and loading carriage
Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P
Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block serves to maintain the feed pressure,
WA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm.
WA100M-8 EU Stage IV Engine WHEEL LOADER ENGINE POWER 69,8 kw / 93,6 HP @ 2.000 rpm OPERATING WEIGHT 6.925-7.230 kg BUCKET CAPACITY 1,05-1,8 m³ 2 Walk-Around ENHANCED FUEL EFFICIENCY AND ENVIRONMENTAL
Grout pumps and dosing systems - for grouting with 2 components
Grout pumps Grout pumps and dosing systems - for grouting with 2 components Type LP 20-20/3 LP 20-20/PA Electric drive 220 V/ 50 Hz lighting current Option Electric drive 400 V/ 50 Hz three-phase current
MMC CX1 & CX2 SERIES
A Group Company MINSTER BULLETIN 184E P R E S S E S MMC CX1 & CX2 SERIES SINGLE & 2-POINT GAP FRAME PRESSES 45-315 METRIC TONS Material Forming Solutions AFFORDABLE QUALITY WITH MINSTER S INDUSTRY -LEADING
Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP
Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialized in Horizontal
Service - Training BC 462 RB / BC 472 RB BC 472 RS / BC 462 EB
Service - Training BC 462 RB / BC 472 RB BC 472 RS / BC 462 EB S/N 101 930 03...> S/N 101 930 07...> / S/N 101 930 00...> S/N 101 930 04...> S/N 101 930 01...> S/N 101 930 05...> / S/N 101 930 02...> S/N
Spraymec 8100 VC. Features. Technical data sheet AUSTRALIA
Equipment includes options and extra equipment. Features is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying in tunnel projects with variable tunnel cross-sections.
RC DRILLING DEPTH GUIDELINES DRILL ROD / CORE BARREL. Hole Depth METRIC. Hole Depth U.S. 4 (101,6 mm) 700 m ft. 4-1/2 (114,3 mm) 600 m 1.
Drilling depth capacity s are based on feedback from field operatives and can be reasonably expected with vertical, water filled holes, by well-trained drilling crew using high quality drilling tools.
The machine has been overhauled in 2016
ZENO hammer mill Type ZHM 1000/2000 x 700 Constructed in 2002 Drive power 200 kw The machine has been overhauled in 2016 Technical specifications Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH,
ALL TERRAIN CRANE GA-1000N
ALL TERRAIN CRANE GA GA-N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF11-4 SPEC. NO. GA-N-1-912 Control No. JA-2 35 GA-N-1-912 GA-N CRANE SPECIFICATIONS CRANE CAPACITY 12.2m Boom,kg at 2.8m (13part-line)
Axial Piston Variable Pump A4VG
Axial Piston Variable Pump A4VG RE 92003/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Sizes 28...250 Nominal 400 bar Peak 450 bar Closed circuit Contents Ordering Code / Standard Program 2 Technical
QJ331 Jaw Crusher Features & Benefits Revision
QJ331 Jaw Crusher Features & Benefits Revision 03 08-09-2014 1 Sandvik Mobiles Hopper Feeder Crusher Main Conveyor Controls Engine Tracks Options Benefits Overview 2 Sandvik Mobiles Hopper 2505mm x 4500mm
Bending, punching, shearing & plasma cutting
Atlantic Blue Line Bending, punching, shearing & plasma cutting ATP, ATS, ATT, ATPL Atlantic Blue Line Sheet Metal WWW.HACO.COM For Impressive Performances 1 High level of technology, for competitive prices
Spraymec SF 050 D. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Spraymec SF 050 D is a diesel-hydraulic self-propelled mobile concrete sprayer for modern mining operations in small and medium size
Metquip Rentals Pty Ltd
Metquip Rentals Pty Ltd ABN 26 095 120 175 Suppliers of Plant and Equipment to the Scrap Metal and Recycling Industry PO Box 5446 PO Box 179 Port Macquarie NSW 2444 Applecross WA 6153 Phone: 02 6584 2369
APIESSE FEEDER FOR BIOGAS PLANTS
PIESSE FEEDER FOR IOGS PLNTS - Description of the iogas Feeder WEIGHING, MIXING, DOSING, FEEDING of substrates, organic solids and fluids into a biogas digester grass silage maize silage sugar beets chopped
Demolition Attachments
Demolition Attachments SMC Series Multi - Crushers SUP Series Multi - processors SRG Series Demolition grabs Mini - Series Mini - Crushers Pulverizers Posher Series Pulverizers Demolition Attachments-2006.01
Electric pump EP-1. Electric pump with 1.9 kg reservoir:
The BEKA-MA central lubrication pump model EP-1 is electrically actuated and has up to a maximum of independently operating lubricant outlets. A separate pump element is required for each outlet. Three
Genuine Parts Original Ersatzteile. Series cc - Axial Piston Pump Service Parts Manual
250 cc - Axial Piston Pump Service Parts Manual sauecontents Genuine Parts Unit and Service Parts Identification... 3-4 Order Code... 5 Housing... 6-7 Swashplate... 6-7 Displacement Limitation... 8-9 End
UJ440I HD JAW CRUSHER FEATURES & BENEFITS. Rev
HD JAW CRUSHER FEATURES & BENEFITS Rev 1 02-12-14 MODELS AVAILABLE Comfort - standard grizzly feeder Trend - pan feeder and live pre screen Classic - standard grizzly feeder and live under screen 2 Hopper
Variable Displacement Pump A4VG for closed circuits
RE 92 003/05.99 RE 92 003/05.99 replaces: 02.98 Variable Displacement Pump A4VG for closed circuits Sizes 28...250 Series 3 Nominal pressure 400 bar Peak pressure 450 bar A4VG...EP Index Features 1 Ordering
320E L. Hydraulic Excavator
320E L Hydraulic Excavator Engine Drive Engine Model Cat C6.6 ACERT Maximum Travel Speed 5.6 km/h 3.5 mph Net Power SAE J1349 114 kw 153 hp Maximum Drawbar Pull 205 kn 46,086 f Gross Power SAE J1995 122
Technical Specifications SENNEBOGEN Track Material Handler
Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB., Tier Final HP (18 kw) Reach standard optional '1" (1. m) (stick pin) '" (1 m)
Technical Specifications SENNEBOGEN Track Material Handler
Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional 1 (1 m) (stick pin) up to 8 (18 m)
With Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,