Technical Specifications SENNEBOGEN Track Material Handler

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Technical Specifications SENNEBOGEN Track Material Handler"

Transcription

1 Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB., Tier Final HP (18 kw) Reach standard optional '1" (1. m) (stick pin) '" (1 m) (stick pin) Operating Weight R-HD / track 9,8 lb (,9 kg) Magnet System rating kw

2 Technical Specifications 8 R-HD E ENGINE model Cummins QSB. C type in-line, cylinder, cooled exhaust gas recirculation, water cooled emission EPA Tier Final net power HP (18 rqm injection high pressure common-rail displacement. L (8 cu.in.) bore.1 in ( mm) stroke.88 in (1 mm) aspiration turbo charged, charge air cooled fuel tank 1 gal ( L) air filtration direct flow filtration system dual stage filter with pre-filter control integrated ECM automatic idle - stop eco mode ELECTRICAL alternator starter battery lights V/Ah Vm.8 kw x 1 V, Ah x cab roof, type halogen x frame upper carriage, type H HYDRAULIC SYSTEM system type LUDV load sensing pilot pressure controlled open center pump type variable-displacement axial-piston pump max. pump flow 1 gpm ( l / m) max. pressure, psi ( bar) hydraulic tank 8 gal ( L) hydraulic system 18 gal (8 L) filtration dual filtration system micron (HydroClean) COOLING cooling type hydraulic / water charge air cool-on-demand, suction-type fan system, side by side hydraulic fan drive axial piston pump, reversible fan thermostatically controlled, closed loop system direct fan drive SWING SYSTEM swing speed swing hydraulic drive swing brake swing bearing - 8 rpm open loop 1 x axial piston motor driving planetary gearbox, integrated brake valves multidisc brake, spring loaded external teeth, sealed ball bearing TRAVEL / UNDERCARRIAGE type crawler T1/8 system mechanical adjustable wide gauge drive independent driven by an axial piston motor through a compact planetary travel speed -1.8 mph (-. km/h) shoes. ( mm) (triple grouser) crawler B maintenance free steering foot pedals / levers safety travel alarm REFILL CAPACITIES fuel tank 1 gal ( L) engine cooling system 1. gal ( L) engine oil w / filter.9 gal (1 L) hydraulic tank 8 gal ( L) hydraulic system 18 gal (8 L) swing gear (each) 1. gal (. L) final drive (each).8 gal (9. L) swing ring lubrication reservoir. gal (1. L) central lubrication reservoir. lb (. kg) diesel exhaust fluid.9 gal ( L) MAGNET SYSTEM rating voltage (magnetized) current (cold condition) controller generator drive WEIGHT operating weight kw V 8 Amps Hubbell Baldor hydraulic 9,8 lb (,9 kg) Subject to technical modification.

3 Standard / Optional Equipment 8 R-HD E ENGINE Water separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater ELECTRIC Battery disconnect switch Centralized fuse box Battery jump start connection from ground level HYDRAULIC Pilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Additional hydraulic circuits Attachment return filtration filters ( µm) UPPER CARRIAGE Rearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Removable panels Additional light package Custom colors Seawater paint coating OPERATORS CAB (maxcab) Hydraulic elevating cab system E Multi adjustable, air suspended operators seat ( mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 1 V / V power outlet Windshield wiper and washers Emergency exit hammer Safety lever Sun shades OPERATOR S CAB (maxcab) Interior lighting Rain cover front window Outside mirror Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maxcab industry Windshield protection guard Skylight protection guard Skylight FOPS guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E/ Operators cab with floor window Additional cameras UNDERCARRIAGE Heavy duty designed material handling under carriage Crawler under carriage with mechanical adjustable tracks Heavy duty crawler track frame." ( mm) triple grouser track shoes, canted Maintenance free crawlers B Hydraulic chain tension device Travel alarm." ( mm) triple grouser track shoes, canted." ( mm) forged flat track shoes, canted Crawler under carriage with hydraulic adjustable tracks WORKING EQUIPMENT Purpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears MAGNET SYSTEM Hydraulic driven generator Magnet controller Magnet suspension link ATTACHMENTS Orange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler Live heel SWING SYSTEM protection cover, removable Manual operated swing gear pinion lubrication system Subject to technical modification. Standard Equipment Optional Equipment

4 8 R-HD E Lift Capacities [.] 1,, [.9] [.] 1,8,11 [.8] 1, [.] 1, [.] [.] 1, 1,8 11,8 1, [.] 1,991 [.] 1,9 [.] 1, 9, [.] 1,8 [.8] 1, [.] 1,889 [.] 1, [.] 11, [8.1] [.1] [.] [.] [.],,9 19,1 1, 1, 1,8 11, [11.] [.] [8.8] [.] [.] [.8] [.],1,,9 1,1 1,991 1,8 11,8 [1.] [11.9] [9.] [.9] [.8] [.] [.] 18,98 8,9, 18,8 1, 1,8 11, [8.] [1.9] [.] [8.] [.] [.] [.],9,8 9,, 18,19 1, 1,8 11, [.] [.9] [1.] [.] [8.] [.] [.] [.1],11,8,8 18,98 1,1 1,8,8 [.] [9.] [.] [8.] [.9] [.8] [.9],8 18,98 1,1 1,1 1, 11,9 9, [.9] [8.] [9.] 18,9 [.9] 1, [.] 1,8 [.] [.] [8.] [.1] [.8] machine shown in mirror image,9 [.] 8, [.8] 9,9 [.1] 8,98 [.9] K Working Equipment K1 reach '1" (1. m) boom '11" (8. m) stick ' (. m) Operator s Cab model E maxcab hydraulic elevating up eye level approx. 18' (. m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

5 8 R-HD E Lift Capacities machine shown in mirror image, [.],8 [.8] 1, [.],8 [.] 1,8 [.8] 11,9 [.],11 [.] 1,8 [.] 11,9 [.] 11, [.] [.1] 1,9 [.] 1,1 [.] 11, 1,1 [.] 1,9 [.] 1, [.] 11, [.],11 1,1 [.] 1,1 [.] 1,1 [.] 1,8 [.1] 11, [.],11 [9.] [.9] [.] [.8] [.] [.] 1,,9 18,19 1, 1,8 11,8, [1.] [.] [8.] [.] [.] [.] [.],8, 19,1 1,9 1,9 11,9, [.] [11.] [8.9] [.] [.] [.] [.],8,8, 1, 1,889 11,9, [.1] [.8] [9.] [.] [.] [.] [.], 1,8, 1, 1,889 11,9, [.] [.1] [9.] [.] [.] [.] [.],1 11,, 1,1 1,9 11,8 [.8] [.] 11, [9.1] 18,9 [.] 1, [.] 1, [.] 11, [.] [.] [8.] 1, [.] 1,9 [.9] 11,9 [.] 8,1 [.] [.] [.] [.] [.] [.] 9,9 [.1] [.] 8, [.8],1 [.] K1,1 [.],9 [.],1 [.],9 [.],8 [.1] Working Equipment K1 reach '" (1 m) boom '" (9.8 m) stick '" (. m) Operator s Cab model E maxcab hydraulic elevating up eye level approx. 18' (. m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

6 8 R-HD E Lift Capacities machine shown in mirror image [.] 9, [1.],11 18,9 [8.] 1,8 [9.9],1 1,1 [.9] 1,9 [.] 18,9 11, [.] 11,9 [.] 1, [.9] 1,9 [.] 1,1 9, [.] 9, [.] [.], [.],8 [.9] 11, [.] 1, [.] 1, [.] 9,8 [.] [.], [.],8 [.9] 11, 8,1 [.] 9,9 [.1] 9,8 [.] [.],11 8,1 [.] [.] 9,9 [.1] [.] [11.1] [8.] [.9] [.9] [.] [.] 8, 1,1, 1,9 1,9 11,8, [.8] [.9] [9.1] [.] [.] [.] [.] 8,98 1,, 1, 1,889 11,9, [.9] [.] [9.] [.] [.] [.] [.] 1,889, 1, 1,889 11,9, 8,1,11 [.] [. 1,9 [.] 1, [9.] 19,81 [9.] 18,19 [.] 1,1 [.] 1,1 [.] 1,9 [.] 1,8 [.] 11,8 [.],8 [.] [.] [.] [.] [8.] [.9] [.8] [.9] [.] B Working Equipment B1 reach '" (1 m) banana boom '" (9. m) banana stick ' (. m) Operator s Cab model E/ maxcab hydraulic elevating up & out (optional item) eye level approx. 19' (.8 m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

7 8 R-HD E Lift Capacities 1, [.] 1,991 1, [.8] [.] 1, 1,9 11,9 [.] [.] [.] 1, 1,9 1,1 [.1] [.] [.] 19,1 1,1 1,9 1, [8.8] [.] [.] [.] 1,1 1,19 1, 1, [9.] [.8] [.] [.] 1,9,9 18,98 1,1 1, [1.] [.] [8.] [.9] [.9],, 19,1 1, 1,8 [.] [11.] [8.8] [.1] [.], [.] 11, [.] 11, [.] 11, [.1] 11, [.1],1,, 1,9 1,8 11, [.],9 [1.] 1,8 [9.1], [.] 1,8 [.] 1, [.1],8 [.], [8.1] 1, [9.1] 18,9 [.] 1,1 [.9] 1, [.9],11 [.] [.] [8.] [.9] [.] [.] 1,9 1,889 11, [.] [.] [.1] [.] 9, [.] 9, [.] 9,8 [.] [.],1 [.] K1 ULM machine shown in mirror image Working Equipment K1 ULM reach '" (1. m) boom '11" (8. m) stick 19'8" (. m) ULM Operator s Cab model E maxcab hydraulic elevating up eye level approx. 18' (. m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

8 Transport dimensions '" () 1'1" (,) 9'8" (,) '" () 19'" (,8) '" (,) 8'8" (,) '" (,) '" (1,) 1'" () '" (,) 9'8" (,) 1'" (,8) 1'8" (,) 1'11" (,) 1'9" (,) ' (1,) Reach Boom Length Stick Length Transport Length Transport Height H1 * Transport Height H1/ ** K1 '11" (8. m) ' (. m) 1' (1. m) '" (. m) K1 '" (9.8 m) '" (. m) '" (1.8 m) '8" (. m) 11'8" (. m) B1 '" (9. m) banana ' (. m) ' (1. m) 11'" (. m) K1 ULM '11" (8. m) 19'8" (. m) 1' (1. m) 11'" (. m) 1' (. m) transport dimensions valid for boom position 1 only boom bosition may increase transport height & transport length handrails, catwalks & other accessories are disassembled for transportation *optional cab E/ will increase machine transport height by " ( mm) **only valid with 8" ( mm) rise of machine and/or clearance for boom/stick lowering Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. See your SENNEBOGEN dealer for further information. 1 SENNEBOGEN LLC, all rights reserved, printed in USA SENNEBOGEN LLC 19 Sennebogen Trail Stanley, NC 88, USA Phone +1 () -9 Fax +1 () R-HD/E-1 GO FOR GREEN

Technical Specifications SENNEBOGEN Track Material Handler

Technical Specifications SENNEBOGEN Track Material Handler Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional 1 (1 m) (stick pin) up to 8 (18 m)

More information

Technical Specifications Sennebogen Track Material Handler

Technical Specifications Sennebogen Track Material Handler Technical Specifications Sennebogen Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSX1-C, Tier i HP (391 kw) Reach standard optional 9'" (1.1 m) (stick pin) up to 3'"

More information

132 HP 54,000 lbs. C Series. green line Material Handling Machine

132 HP 54,000 lbs. C Series. green line Material Handling Machine 1 HP, lbs. C Series green line Material Handling Machine Working radius up to ' No computers required to control hydraulic system Ultra fine hydraulic oil filtration system reduces maintenance cost and

More information

224 kw. 54,5 t. Crawler material handling machine 20 m. TIER IVf

224 kw. 54,5 t. Crawler material handling machine 20 m. TIER IVf 4 kw 54,5 t Crawler material handling machine 0 m TIER IVf Further developed. The E-Series. The characteristics of the E-Series 0 years of experience in the design and construction of hydraulic material

More information

A 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 9 B litronic` Machine for Industrial Applications Operating Weight 67,7 7,98 lbs Engine Output 97 HP ( kw) Technical Data Engine Rating per ISO 99 97 HP ( kw)

More information

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 95 B HD litronic` Machine for Industrial Applications Operating Weight 138,88 151, lbs Engine Output HP ( kw) Technical Data Engine Rating per ISO 99 HP ( kw)

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

Doosan Infracore DX700LC TECHNICAL DATA

Doosan Infracore DX700LC TECHNICAL DATA Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)

More information

EC460 VOLVO EXCAVATOR LONG CRAWLER

EC460 VOLVO EXCAVATOR LONG CRAWLER VOLVO EXCAVATOR EC460 LONG CRAWLER Engine power, gross: 239 kw (321 hp) Operating weight: 44.3 ~ 46.0 t Buckets (SAE): 1900 ~ 2300 l Low-emission, turbocharged Cummins diesel engine with direct injection

More information

EC240 VOLVO EXCAVATOR. Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t ~ lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.

EC240 VOLVO EXCAVATOR. Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t ~ lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2. VOLVO EXCAVATOR EC240 Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t 51820 ~ 53660 lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.45 yd 3 Low-emission, turbocharged Cummins diesel engine with

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 28,440 (12,900 kg) SAE Net Horsepower: 95 HP (71 kw) Bucket Range:.42 -.98 yd 3 (.32 -.75 m 3 ) Engine Isuzu AJ-4JJ1X Tier 3 turbocharged diesel engine with electronic fuel control, 4-cylinder,

More information

Technical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3

Technical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3 Technical Description Hydraulic Excavator A B Operating Weight,, t Engine Output kw ( HP) Bucket Capacity,, m Technical Data Engine Deutz-Diesel engine Rating per ISO kw ( HP) at RPM Model BF M E Typ cylinder-in-line,

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards

More information

301.5, 301.6, Mini Hydraulic Excavator

301.5, 301.6, Mini Hydraulic Excavator 301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563

More information

ROUGH TERRAIN CARRIER

ROUGH TERRAIN CARRIER ROUGH TERRAIN CARRIER 95B, 95B, & 595B TIER FINAL - SPECIFICATIONS The Rough Terrain Carrier (RTC) loader package is the most maneuverable and powerful log loading machine in the Barko lineup, providing

More information

305 CR. Mini Hydraulic Excavator

305 CR. Mini Hydraulic Excavator 305 CR Mini Hydraulic Excavator Engine Power Gross 32 kw 43 hp Net 31.3 kw 42 hp Maximum Operating Weight With cab 4990 kg 11,000 lb With canopy 4940 kg 10,890 lb 305 CR Mini Hydraulic Excavator Designed

More information

290G LC. 147 kw (197 hp)

290G LC. 147 kw (197 hp) 290G LC 147 kw (197 hp) 290G LC Engine 290G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the

More information

250G LC. 142 kw (191 hp)

250G LC. 142 kw (191 hp) 250G LC 142 kw (191 hp) 250G LC Engine 250G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the

More information

R 994 B. Technical Description Hydraulic Excavator

R 994 B. Technical Description Hydraulic Excavator Technical Description ydraulic Excavator Operating Weight with Backhoe Attachment 654,330 lb Operating Weight with Shovel Attachment 675,500 lb Engine Output 1500 P Bucket Capacity 20.0 23.5 cuyd Shovel

More information

Engine Gross Power Operating Weight Bucket Capacity 925E

Engine Gross Power Operating Weight Bucket Capacity 925E Engine Cummins QSB6.7 Tier 4 Final Gross Power 190 Hp (142 kw) Operating Weight 55,115-62,170 lbs (25,000-28,200 kg) Bucket Capacity 0.65-1.8 yd 3 (0.5-1.4 m 3 ) 925E EXCAVATOR 2 925E EXCAVATOR 3 925E

More information

PC600LC-8 MATERIAL HANDLER. NET HORSEPOWER 320 kw 429 1,800 rpm OPERATING WEIGHT kg 145, ,586 lb REACH

PC600LC-8 MATERIAL HANDLER. NET HORSEPOWER 320 kw 429 1,800 rpm OPERATING WEIGHT kg 145, ,586 lb REACH MATERIAL HANDLER NET HORSEPOWER 320 kw 429 HP @ 1,800 rpm OPERATING WEIGHT 66083 67399 kg 145,686 148,586 lb REACH 16.8 18.3 m 55' 60' PC 600 LC Photos may include optional equipment MATERIAL HANDLER M

More information

Volvo High-performance, lowemission

Volvo High-performance, lowemission A406X6 VOLVO ARTICULATED HAULER Engine output SAE J1349: Net 295 kw 395 hp Gross 297 kw 398 hp Body volume: 22 m 3 29.0 yd 3 Load capacity: 36 t 40 sh ton Volvo High-performance, lowemission direct-injected,

More information

Fecon FTX128L. Walk Around Guide

Fecon FTX128L. Walk Around Guide Fecon FTX128L Walk Around Guide FTX128L Specifications Specification FTX128L Fuel Consumption 4 gph Fuel Tank Capacity 45 gal. / 170 ltr Horsepower 128hp / 95.4 kw Engine Make / Model Cummins QSB4.5 Maximum

More information

TD-9S COOLING ENGINE OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP TD-9S TD-9S.

TD-9S COOLING ENGINE OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP TD-9S TD-9S. CRAWLER DOZERS EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP ENGINE Make and model Emissions standard Displacement Cummins QSF3.8 EPA Tier 4F/EU Stage IIIB 3.8 l (229 in3) COOLING Type Variable-speed fan

More information

SKID STEER LOADER From World First to World Leader

SKID STEER LOADER From World First to World Leader TS80V2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S EPA Final Tier 4 Emission Compliant - Maintenance

More information

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism.

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism. 320 GC Hydraulic Excavator Technical Specifications Engine Engine Model Cat C4.4 ACERT Net Power (ISO 9249) 107 kw 143 hp Net Power (SAE J1349) 107 kw 143 hp Gross Power (ISO 14396/SAE J199) 108 kw 14

More information

860C/870C/L870C FELLER BUNCHERS

860C/870C/L870C FELLER BUNCHERS 860C/870C/ FELLER BUNCHERS The C-series feller bunchers Tigercat 860C, 870C and feller bunchers are high production, extreme duty, final fell machines. They are well suited to large timber, mixed stands,

More information

15,432 lbs. (7 000 kg) Operating Weight

15,432 lbs. (7 000 kg) Operating Weight 15,432 lbs. (7 000 kg) Operating Weight 1600 Quantum Specifications ENGINE Isuzu 4JB1direct injected, water cooled, 4-cycle diesel, 4 cylinder, 169.1 CID (2 771 cc), 3.66" (93 mm) bore x 4.02" (102 mm)

More information

Crawler Excavator R 934 C. Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity:

Crawler Excavator R 934 C. Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity: Crawler Excavator R 934 C Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity: 1.65 2.00 m³ R 934 C Litronic Operating Weight: 32,600 33,500 kg Engine

More information

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa)

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa) 9010B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct

More information

Ton Telescopic Boom Crawler Crane

Ton Telescopic Boom Crawler Crane 45 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 45 ton at feet (40t at 3.0m) 4-section, 34 0 5 0 (.4 m 32 m) DIMENSION Overall Length 43 7 (13.29 m) Overall Width (tracks extended)

More information

MANTSINEN. HybriLift. More load, less energy.

MANTSINEN. HybriLift. More load, less energy. HybriLift More load, less energy. HybriLift The strongest and fastest for superior productivity. Uusikaupunki, Finland HybriLift Increases Energy Efficiency by up to Tuapse, Russia % Antwerp, Belgium Antwerp,

More information

Those in the know, know Takeuchi. TL12V2 Track Loader TL12V2

Those in the know, know Takeuchi. TL12V2 Track Loader TL12V2 Those in the know, know Takeuchi TL12V2 Track Loader TL8 TL10 TL12 TL12V2 ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged and Intercooled - DOC+DPF+SCR Exhaust After Treatment - Active

More information

SKID STEER LOADER From World First to World Leader

SKID STEER LOADER From World First to World Leader TS80R2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S. EPA FINAL TIER 4 Emission Compliant - Maintenance

More information

R 954 C 108, , / 326 HP

R 954 C 108, , / 326 HP Crawler Excavator R 94 C Operating Weight: Engine Rating: Bucket Capacity: 8,00 -,700 lb 40 kw / 6 HP.60 -.90 yd³ R 94 C Operating Weight: Engine Output: Bucket Capacity: 8,00 -,700 lb 40 kw / 6 HP.60

More information

TL8 Compact Track Loader

TL8 Compact Track Loader Those in the know, know Takeuchi TL8 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged - DOC+DPF Exhaust After

More information

Dimensions & Working Range

Dimensions & Working Range We build a better future Dimensions & Working Range R35Z-9 Dimensions With Tier 4 Engine installed mm (ft.in) A B C D E F Overall width of upper structure Overall width of cab Overall height of cab Tail

More information

RH200. Hydraulic Mining Excavator RH200 HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

RH200. Hydraulic Mining Excavator RH200 HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet. RH00 Hydraulic Mining Excavator 7,600 ( General Data: ( 0 8,0 (8 0 7,80 ( 7,0 (,80 (8 6,60 (,780 (9,00 ( 7 Features 7,000 ( 0,0 ( 8 7,000 ( 0 8,70 (8 8 8,760 (8 9 RH00 HYDRAULIC MINING EXCAVATOR Operating

More information

HITACHI ZAXIS130W. engine rated power 87.5 kw / 117 HP. operating weight kg. bucket capacity m 3

HITACHI ZAXIS130W. engine rated power 87.5 kw / 117 HP. operating weight kg. bucket capacity m 3 HITACHI ZAXIS130W engine rated power 87.5 kw / 117 HP operating weight 13 400-15 300 kg bucket capacity 0.19-0.66 m 3 EQUIPMENT Engine Model................................. Isuzu 4BG1XABFA Type....................

More information

RH120E. Hydraulic Mining Excavator RH120E HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

RH120E. Hydraulic Mining Excavator RH120E HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet. RH120E Hydraulic Mining Excavator 6,00 mm (21 ft 4 General Data: Operating Weight 6,000 mm (19 ft 8 7,640 mm (2 ft 1 6,40 mm (21 ft 2 6, mm (20 ft 8 4,90 mm (16 ft 2, mm (7 ft 1 1,940 mm (6 ft 4 1,000

More information

Volvo l60g, L70G, L90G IN DETAIL.

Volvo l60g, L70G, L90G IN DETAIL. Volvo lg,, IN DETAIL. Engine 6-cylinder, 6 liters inline turbocharged diesel engine with an advanced fuel injection system with the common rail. Fuel is distributed under high pressure from a high-pressure

More information

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism.

320 GC. Technical Specifications. Hydraulic Excavator. Track. Engine. Drive. Hydraulic System. Engine rpm. Swing Mechanism. 320 GC Hydraulic Excavator Technical Specifications Engine Engine Model Cat C4.4 ACERT Net Power (ISO 9249) 90 kw 121 hp Net Power (SAE J1349) 90 kw 121 hp Gross Power (ISO 14396/SAE J199) 91 kw 122 hp

More information

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb) 534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice

More information

Technical data Hydraulic crawler crane HS 875 HD

Technical data Hydraulic crawler crane HS 875 HD Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight

More information

TL12 Compact Track Loader

TL12 Compact Track Loader Those in the know, know Takeuchi TL12 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - EPA Interim Tier 4 Compliant - Turbocharged and Intercooled - DOC+DPF Exhaust

More information

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION GENERAL DATA CRANE CAPACITY BOOM GTC-1200 130 Ton Telescopic Boom Crawler Crane 130 ton at 10 feet (120t at 3.0m) 5-section, 42 1 155 0 (12.8 m 47.2 m) DIMENSION Overall Length 51 9 (15.8 m) Overall Width

More information

Doosan Infracore DL220 TECHNICAL DATA

Doosan Infracore DL220 TECHNICAL DATA Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)

More information

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft

Max. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 100 US Tons Max. Length: 200 ft Max. + Jib Length: 190 ft + 60 ft SPECIFICATIONS FOR CK1000-III CRAWLER CRANE The Kobelco CK1000-III Crawler Crane is designed

More information

L45B VOLVO COMPACT WHEEL LOADER

L45B VOLVO COMPACT WHEEL LOADER VOLVO COMPACT WHEEL LOADER L45B Gross Power: SAE J1995 81/110 kw/hp Net Power: SAE J1349 73/99 kw/hp Operating Weight: 8,2-8,4 t Capacities: 1,3-2,5 m 3 High-performance, low environmental impact diesel

More information

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION

GTC Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION 66 Ton Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY BOOM 66 ton at 10 feet (60t at 3.0m) 4-section, 37 8 118 1 (11.5 m 38.0 m) DIMENSION Overall Length 46 1 (14.08 m) Overall Width (tracks

More information

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version ZAXIS-3 series Short-tail-swing version HYDRAULIC EXCAVATOR Model Code: ZX29U-3 Engine Rated Power: 19.7 kw (26.4 HP) Operating Weight: 3 060-3 230 kg Backhoe Bucket: 0.08 m 3 Advances in Hitachi Design

More information

308D CR. Mini Hydraulic Excavator with Fixed Boom. Engine Power. Weight

308D CR. Mini Hydraulic Excavator with Fixed Boom. Engine Power. Weight 308D CR Mini Hydraulic Excavator with Fixed Boom Engine Power Net power Gross power Weight Operating weight 41.5 kw/56.5 hp 43.0 kw/58.5 hp 7850 kg Features 308D CR with Fixed Boom Controllability Perfectly

More information

308E2 CR. Mini Hydraulic Excavator

308E2 CR. Mini Hydraulic Excavator 308E2 CR Mini Hydraulic Excavator Engine Weights Engine Model* Cat C3.3B Operating Weight with Cab 8400 kg 18,519 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications *Engine meets U.S. EPA Tier

More information

Crawler Tractor PR 734-4

Crawler Tractor PR 734-4 Crawler Tractor PR 734-4 litronic` Engine output: 150 kw / 204 HP Operating weight: 17,960 20,000 kg Basic machine Engine Liebherr Diesel engine Rating (ISO 9249) Rating (SAE J1349) Rated speed Displacement

More information

EC55D. Volvo Compact Excavators t 36.5 kw

EC55D. Volvo Compact Excavators t 36.5 kw EC55D Volvo Compact Excavators 5.4-5.63 t 36.5 kw A machine you can rely on Volvo s EC55D high quality compact excavator is designed to work harder for longer. Using high quality components and Volvo design,

More information

COMPACT HYDRAULIC EXCAVATOR

COMPACT HYDRAULIC EXCAVATOR PC88MR-8 HORSEPOWER Gross: 0.7 kw 68 HP @ 190 rpm Net: 9 kw 6 HP @ 190 rpm OPERATING WEIGHT 822 839 kg 18,10 18,10 lb BUCKET CAPACITY 0.09 0.3 m 3 0.12 0. yd 3 PC 88MR Photo may include optional equipment.

More information

STATIC DIMENSIONS JS145LC MONOBOOM

STATIC DIMENSIONS JS145LC MONOBOOM MAX OPERATING WEIGHT: 34,430 lb (15,617 kg) NET ENGINE POWER: 109 hp (81 kw) E I H K J F L M G C D A B STATIC DIMENSIONS JS145LC MONOBOOM Dimensions in ft-in (millimeters) A Track Length on Ground 9-5

More information

PC750LC-6 PC750LC-6 MATERIAL HANDLER. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 196, ,700 lb REACH

PC750LC-6 PC750LC-6 MATERIAL HANDLER. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 196, ,700 lb REACH PC750LC-6 MATERIAL HANDLER NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT 89062-92396 kg 196,350 203,700 lb REACH 16.7-18.9 m 55' - 62' Note: For standard specifications and features, refer to the Komatsu

More information

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries

More information

MINI EXCAVATORS 8040, 8045 ZTS AND 8050 RTS/ZTS

MINI EXCAVATORS 8040, 8045 ZTS AND 8050 RTS/ZTS OPERATING WEIGHTS: 4300 kg (9480 lb), 4750 kg (10472 lb) & 5253 kg (11511lb) NET ENGINE POWER: 33.1 kw (45 hp) STATIC DIMENSIONS mm (ft-in) mm (ft-in) mm (ft-in) A Sprocket idler centres 1845 (6-1) 1990

More information

TECHNICAL DATA MATERIAL HANDLER. mhl hp up to 34,172 lbs up to 29'6"

TECHNICAL DATA MATERIAL HANDLER. mhl hp up to 34,172 lbs up to 29'6 TECHNICAL DATA MATERIAL HANDLER mhl 250 114 hp up to 34,172 lbs up to 29'6" MHL250 E Introduction THE NEW "MHL2 SERIES: REVOLUTIONARY FOR THE RECYCLING INDUSTRY. Greater mobility and flexibility in material

More information

Link-Belt Forestry machines are designed and built with you in mind. Whether you re pioneering sites, building access roads, harvesting timber,

Link-Belt Forestry machines are designed and built with you in mind. Whether you re pioneering sites, building access roads, harvesting timber, Purpose-Built For The Work You Do Link-Belt Forestry machines are designed and built with you in mind. Whether you re pioneering sites, building access roads, harvesting timber, processing logs or loading

More information

Engine Gross Power Operating Weight Bucket Capacity 835H

Engine Gross Power Operating Weight Bucket Capacity 835H Engine Perkins 1204F Tier 4 Final Gross Power 131 hp (98 kw) Operating Weight 23,760-24,640 lbs (10,800-11,200 kg) Bucket Capacity 2.5 yd 3 (1.9 m 3 ) 835H 2 3 4 MORE POWER LESS CONSUMPTION The new 835H

More information

Hydraulic Mining Excavator RH 120-E

Hydraulic Mining Excavator RH 120-E Hydraulic Mining Excavator RH 120-E 6,40 mm 21 2 6,3 mm 20 8 6,390 mm 23,300 mm 17 6,00 mm 21 4 4,90 mm 16 3 7,600 mm 24 11 2, mm 7 1 1,940 mm 6 4 880 mm 2 11 6,000 mm 19 8 7,640 mm 2 1 1,000 mm 3 3,800

More information

Machine for Industrial Applications LH 22 M

Machine for Industrial Applications LH 22 M Machine for Industrial Applications LH 22 M litronic` Operating Weight: 48,7, lb Engine: 34 HP / kw Stage Tier 3 Technical Data Engine Rating per SAE J349 34 HP ( kw) at,8 rpm Model Liebherr D834 Type

More information

Technical data Hydraulic crawler crane HS 895 HD

Technical data Hydraulic crawler crane HS 895 HD Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating

More information

The print quality of this copy is not an accurate representation of the original.

The print quality of this copy is not an accurate representation of the original. We build a better future Equipped with Tier 3a engine *Photo may include optional equipment. Pleasure works an operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

HYDRAULIC EXCAVATOR. PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine

HYDRAULIC EXCAVATOR. PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine NET HORSEPOWER 66.2 kw 89 HP @ 2200 rpm OPERATING WEIGHT 12600 12871 kg 27,780 28,375 lb PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine BUCKET CAPACITY 0.34 0.70 m 3 0.44 0.92 yd 3 HYDRAULIC EXCAVATOR

More information

JCB LOADALL / /

JCB LOADALL / / MAX PAYLOAD: 4,000 lb (1,814 kg) MAX LIFT HEIGHT: 13 ft 3 in (4.0 m) MAX HORSEPOWER: 49 hp (37 kw) B A 520-40 H D E C F G 520-40 STATIC DIMENSIONS 10.00 x 16.5 12 ply Tires 12.00 x 16.5 10 ply Tires A

More information

OPERATING WEIGHT kg NET POWER 19 kw / 25, rpm BUCKET CAPACITY 0,045-0,105 m3 PC27MR-2 27MR-2. Mini-Excavator PC27MR-2

OPERATING WEIGHT kg NET POWER 19 kw / 25, rpm BUCKET CAPACITY 0,045-0,105 m3 PC27MR-2 27MR-2. Mini-Excavator PC27MR-2 PC27MR-2 OPERATING WEIGHT 2.880-3.335 kg NET POWER 19 kw / 25,5 HP @ 2.600 rpm BUCKET CAPACITY 0,045-0,105 m3 PC 27MR-2 Mini-Excavator PC27MR-2 PC27MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation

More information

302.5C Mini Hydraulic Excavator

302.5C Mini Hydraulic Excavator 302.5C Mini Hydraulic Excavator Engine Rated net power 18.6 kw 24.9 hp (ISO 9249) Weights Operating weight 2745 kg 6,052 lb with canopy Operating weight 2850 kg 6,283 lb with cab Weight with rubber tracks,

More information

JCB MINI EXCAVATORS 8040 & 8045 ZTS

JCB MINI EXCAVATORS 8040 & 8045 ZTS OPERATING WEIGHTS: NET ENGINE POWER: 4300 kg (9480 lb) & 4750 kg (10472 lb) 33.1 kw (45 hp) D F K C G L H E A B I J STATIC DIMENSIONS A Sprocket idler centres 1845 (6-1) 1990 (6-6) B Undercarriage overall

More information

PC750 SERIES. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 157, ,055 lb PC750LC-6 PC750SE-6 HYDRAULIC EXCAVATOR PC750

PC750 SERIES. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 157, ,055 lb PC750LC-6 PC750SE-6 HYDRAULIC EXCAVATOR PC750 PC750 SERIES PC750LC-6 PC750SE-6 NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT 71556 80764 kg 157,780 178,055 lb PC750 HYDRAULIC EXCAVATOR PC750 Series Hydraulic Excavator WALK-AROUND With the introduction

More information

OPERATING WEIGHT kg NET POWER 21,7 kw / rpm BUCKET CAPACITY 0,035-0,13 m3 PC35MR-2 35MR-2. Mini-Excavator PC35MR-2

OPERATING WEIGHT kg NET POWER 21,7 kw / rpm BUCKET CAPACITY 0,035-0,13 m3 PC35MR-2 35MR-2. Mini-Excavator PC35MR-2 PC35MR-2 OPERATING WEIGHT 3.580-4.025 kg NET POWER 21,7 kw 29 HP @ 2.400 rpm BUCKET CAPACITY 0,035-0,13 m3 PC 35MR-2 Mini-Excavator PC35MR-2 PC35MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation

More information

OPERATING WEIGHT kg NET POWER 20,6 kw / 27, rpm BUCKET CAPACITY 0,035-0,13 m3 PC30MR-2 30MR-2. Mini-Excavator PC30MR-2

OPERATING WEIGHT kg NET POWER 20,6 kw / 27, rpm BUCKET CAPACITY 0,035-0,13 m3 PC30MR-2 30MR-2. Mini-Excavator PC30MR-2 PC30MR-2 OPERATING WEIGHT 2.990-3.465 kg NET POWER 20,6 kw 27,6 HP @ 2.500 rpm BUCKET CAPACITY 0,035-0,13 m3 PC 30MR-2 Mini-Excavator PC30MR-2 PC30MR-2 M INI-EXCAVATOR WALK-AROUND Tradition and Innovation

More information

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m DATE July, 2004 TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm

More information

750M. (2) 12-volt, low-maintenance 925 cold-cranking -4 F (-20 C) OPERATOR ENVIRONMENT

750M. (2) 12-volt, low-maintenance 925 cold-cranking -4 F (-20 C) OPERATOR ENVIRONMENT 750M LT/WT/LGP CRAWLER DOZER TIER 4 INTERIM CERTIFIED ENGINE Model FPT F5HFL413J Tier 4 Interim Certified Cylinders 4 Displacement 207.5 in 3 (3.4 L) Fuel injection Common rail Fuel #2 Diesel Fuel filter

More information

WHEELED EXCAVATOR JS200W MATERIAL/SCRAP HANDLER

WHEELED EXCAVATOR JS200W MATERIAL/SCRAP HANDLER MAX. OPERATING WEIGHT: MATERIALS HANDLER 25825kg (56934lb) SCRAP HANDLER 25712kg (56685lb) ENGINE POWER: 128kW (172hp) H A H A L L F B F B J I G J I G E C D K E C D K STATIC DIMENSIONS MATERIALS HANDLER

More information

MHL250 E-SERIES TECHNICAL DATA MHL 250 E. 85 kw t up to 9.0 m

MHL250 E-SERIES TECHNICAL DATA MHL 250 E. 85 kw t up to 9.0 m MHL250 E-SERIES TECHNICAL DATA MHL 250 E 85 kw 14.0 15.5 t up to 9.0 m MHL250 E Introduction THE NEW MHL2 SERIES: REVOLUTIONARY FOR THE RECYCLING INDUSTRY. Greater mobility and flexibility in material

More information

SB-30M PIPELAYER. Max Lifting Capacity kg (72,972 lb) Net Horsepower 140 kw (188 hp) Operating Weight kg (60,803 lb)

SB-30M PIPELAYER. Max Lifting Capacity kg (72,972 lb) Net Horsepower 140 kw (188 hp) Operating Weight kg (60,803 lb) SB-30M PIPELAYER Net Horsepower 140 kw (188 hp) Max Lifting Capacity 33 100 kg (72,972 lb) Operating Weight 27 580 kg (60,803 lb) The DRESSTA SB-30M Extra has been specifically designed to handle and lay

More information

COMPACT HYDRAULIC EXCAVATOR PC70-8

COMPACT HYDRAULIC EXCAVATOR PC70-8 PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP / 1950 min -1 Net: 48.5 kw 65 HP / 1950 min -1 OPERATING WEIGHT 6590 kg BUCKET CAPACITY 0.30-0.37m 3 PC 70 Photos may include optional equipment. COMPACT

More information

FORESTRY MULCHERS C100LGP C100R C200 C260 T260 T360. (800) Wooster, OH

FORESTRY MULCHERS C100LGP C100R C200 C260 T260 T360. (800) Wooster, OH FORESTRY MULCHERS C100LGP C100R C200 C260 T260 T360 (800) 392-2686 Wooster, OH Since 1978, starting with the creation of our original RG 145 stump cutter, Rayco has grown into one of the most recognizable

More information

352F. Hydraulic Excavator

352F. Hydraulic Excavator 352F Hydraulic Excavator Engine Drive Engine Model Cat C13 ACERT Maximum Travel Speed 4.7 km/h Power ISO 9249 (metric) 311 kw 413 PS Maximum Drawbar Pull 335 kn Weights Minimum Weight 51 100 kg Maximum

More information

Ground bearing pressure 1.1 kg/cm 2 2 HS 855 HD

Ground bearing pressure 1.1 kg/cm 2 2 HS 855 HD The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting

More information

L-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION

L-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION L-SERIES CRAWLER DOZERS 1150L / 1650L PERFECT IN EVERY MISSION casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 BOOST YOUR PRODUCTIVITY POWER AND EFFICIENCY Drawbar pulling leadership: the hydrostatic

More information

IC-400-3A. Tech Spec. Industrial Crane. 25-Ton Max. Capacity (22,700 kg) Manufacturing Corp. Rated Capacity Limiter... Standard

IC-400-3A. Tech Spec. Industrial Crane. 25-Ton Max. Capacity (22,700 kg) Manufacturing Corp. Rated Capacity Limiter... Standard Tech Spec IC-400-3A Industrial Crane 25-Ton Max. Capacity (22,700 kg) Rated Capacity Limiter... Standard Capacity on Outriggers... 50,000 lbs (22,700 kg) Pick and Carry Capacity... up to 24,400 lbs (11,000

More information

FORESTRY MULCHERS. (800) Wooster, OH

FORESTRY MULCHERS. (800) Wooster, OH FORESTRY MULCHERS (800) 392-2686 Wooster, OH FORESTRY MULCHERS C100LGP: 4 C100R : 6 C160 : 8 C260 : 10 T260 : 12 T360 : 14 Rayco Manufacturing Inc. retains the right to make changes in design and specifications;

More information

TD-14M CRAWLER DOZER STD-LT-LGP. Blade Capacity up to 4.28 m 3 (5.6 yd 3 ) Net Horsepower 120 kw (160 hp)

TD-14M CRAWLER DOZER STD-LT-LGP. Blade Capacity up to 4.28 m 3 (5.6 yd 3 ) Net Horsepower 120 kw (160 hp) TD-14M CRAWLER DOZER STD-LT-LGP Net Horsepower 120 kw (160 hp) Blade Capacity up to 4.28 m 3 (5.6 yd 3 ) Operating Weight 15550 kg (34,282 lb) STD 16550 kg (36,486 lb) LT 17650 kg (38,911 lb) LGP Engine

More information

PC 55MR. Mini-Excavator PC55MR-3. ENGINE POWER 29,5 kw / 39, rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,07-0,175 m³

PC 55MR. Mini-Excavator PC55MR-3. ENGINE POWER 29,5 kw / 39, rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,07-0,175 m³ PC 55MR Mini-Excavator PC55MR-3 ENGINE POWER 29,5 kw / 39,6 HP @ 2.400 rpm OPERATING WEIGHT 5.160-5.350 kg BUCKET CAPACITY 0,07-0,175 m³ Walk-Around The new PC55MR-3 compact mini-excavator is the result

More information

584 / 584HD. Forwarders

584 / 584HD. Forwarders 584 / 584HD Forwarders Engine Operating Weight Engine Model Cat C7 ACERT 584 6WD 20 230 kg 44,600 lb Gross Power 204 kw 274 hp 584HD 23 088 kg 50,900 lb Operating Specifications Load Capacity 584 18 000

More information

28,400 lbs. ( kg) Operating Weight

28,400 lbs. ( kg) Operating Weight 28,400 lbs. (12 900 kg) Operating Weight 2650 Quantum Specifications ENGINE Isuzu 4BG1T turbocharged, water cooled, 4-cycle diesel, 4 cylinder, 235 CID (4 329 cc), 4.13" (105 mm) bore x 4.92" (125 mm)

More information

MOTOR GRADER 872D SIX-WHEEL DRIVE

MOTOR GRADER 872D SIX-WHEEL DRIVE 2 0 5 2 4 5 S A E N E T H O R S E P O W E R D MOTOR GRADER SIX-WHEEL DRIVE Specifications Engine Type................................. John Deere PowerTech TM 6081H; meets EPA Tier II non-road emissions

More information

MANTSINEN. HybriLift. More load, less energy.

MANTSINEN. HybriLift. More load, less energy. HybriLift More load, less energy. R ELECTRIC POWER For extreme operational economy Mantsinen with HybriLift and electric motor is an unbeatable combination MANTSINEN takes hydraulic material handlers to

More information

EC380EHR, EC480EHR VOLVO EXCAVATORS

EC380EHR, EC480EHR VOLVO EXCAVATORS , VOLVO EXCAVATORS Volvo, E480EHR in detail. Engine The latest generation, Volvo engine Tier 4f (Stage IV) emissions compliant diesel engine fully meets the demands of the latest, emsissions regulations.

More information

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 5500

Hydraulic Excavator. PC Loading Shovel PC Backhoe PC 5500 ENGINE POWER 2 x 940 kw / 1260 HP @ 1800 rpm OPERATING WEIGHT 533 552 ton / 1,175,200 1,217,100 lb SHOVEL CAPACITY 29 m³ / 38 yd³ SAE 2:1 heaped BACKHOE CAPACITY 29 m³ / 38 yd³ SAE 1:1 heaped PC 5500-6

More information

6250 kg 13,779 lb 59 hp (44 kw) 8600 kg 18,960 lb 59 hp (44 kw) compact excavators 85R metric ton

6250 kg 13,779 lb 59 hp (44 kw) 8600 kg 18,960 lb 59 hp (44 kw) compact excavators 85R metric ton compact excavators 6- metric ton 6 8 60 kg 1,779 lb 9 hp ( kw) 8600 kg 18,960 lb 9 hp ( kw) DOOSAN DELIVERS a heritage of dedication Doosan, a strong, stable and global company with a 118-year legacy,

More information

JCB MIDI EXCAVATOR 8065 RTS

JCB MIDI EXCAVATOR 8065 RTS JCB MIDI EXCAVATOR OPERATING WEIGHT:, lb (,8 kg) NET ENGINE POWER:. hp (8. kw) Interim Tier IV D F K C G L H E A B I J STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers Rubber - (99) Sprocket Idler

More information

HORIZONTAL GRINDERS FORESTRY MULCHERS

HORIZONTAL GRINDERS FORESTRY MULCHERS HORIZONTAL GRINDERS FORESTRY MULCHERS (800) 392-2686 Wooster, OH HORIZONTAL GRINDERS FORESTRY MULCHERS HORIZONTAL GRINDER RH1754-160 : 4 RH1754-240 : 4 FORESTRY MULCHERS C100LGP : 6 C100R : 8 C260 : 10

More information

325 COMPACT EXCAVATOR SPECIFICATIONS

325 COMPACT EXCAVATOR SPECIFICATIONS 325 COMPACT EXCAVATOR SPECIFICATIONS F WORKING RANGE D E Standard Arm Long Arm A. Maximum Blade Depth... 16.9" (429 mm)... 16.9" (429 mm) B. Maximum Blade Height... 15.5" (393 mm)... 15.5" (393 mm) C.

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129 kw (173 HP) at 1,950 rpm Gross Power SAE J1995 / 136 kw (183 HP) at 1,950 rpm Travel Speed

More information