Technical Specifications SENNEBOGEN Track Material Handler

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Technical Specifications SENNEBOGEN Track Material Handler"

Transcription

1 Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional 1 (1 m) (stick pin) up to 8 (18 m) (stick pin) Operating Weight R-HD / track 1,11 lb (, kg) Magnet System rating kw

2 Technical Specifications 8 R-HD E ENGINE model type emission net power injection displacement bore stroke aspiration fuel tank air filtration control ELECTRICAL alternator starter battery lights Cummins QSL9-C in-line, cylinder, cooled exhaust gas recirculation, water cooled EPA Tier Final HP ( rqm high pressure common-rail 8.9 L (.1 cu.in.).9 in (11 mm).9 in (1 mm) turbo charged, charge air cooled 1 gal (L) direct flow filtration system dual stage filter with pre-filter integrated ECM automatic idle - stop eco mode V/Ah Vm.8 kw x 1 V, Ah x cab roof, type halogen x frame upper carriage, type H HYDRAULIC SYSTEM system type LUDV load sensing pilot pressure controlled open center pump type variable-displacement axial-piston pump max. pump flow 19 gpm ( l / m) max. pressure, psi ( bar) hydraulic tank 1 gal ( L) hydraulic system 18 gal (8 L) filtration dual filtration system micron (HydroClean) COOLING cooling type hydraulic / water charge air cool-on-demand, suction-type fan system, side by side hydraulic fan drive axial piston pump, reversible fan thermostatically controlled, closed loop system direct fan drive SWING SYSTEM swing speed swing hydraulic drive swing brake swing bearing - 8 rpm open loop x axial piston motor driving planetary gearbox, integrated brake valves multidisc brake, spring loaded external teeth, sealed ball bearing TRAVEL / UNDER CARRIAGE type crawler T1/8 system mechanical adjustable wide gauge drive independent driven by an axial piston motor through a compact planetary travel speed 1 st -1. mph (-1. km/h) nd -1.8 mph (-. km/h) shoes. ( mm) (triple grouser) crawler B maintenance free steering foot pedals / levers safety travel alarm REFILL CAPACITIES fuel tank 1 gal ( L) engine cooling system 1.8 gal (. L) engine oil w / filter. gal (8. L) hydraulic tank 1 gal ( L) hydraulic system 18 gal (8 L) swing gear (each) 1. gal (. L) final drive (each).8 gal (9. L) swing ring lubrication reservoir. gal (1. L) central lubrication reservoir. lb (. kg) diesel exhaust fluid.9 gal ( L) MAGNET SYSTEM rating voltage (magnetized) current (cold condition) controller generator drive WEIGHT operating weight kw V 9 Amps Hubbell Baldor hydraulic 1,11 lb (, kg) Subject to technical modification.

3 Standard / Optional Equipment 8 R-HD E ENGINE Water separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater ELECTRIC Battery disconnect switch Centralized fuse box Battery jump start connection from ground level HYDRAULIC Pilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Additional hydraulic circuits Attachment return filtration filters ( µm) UPPER CARRIAGE Rearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Removable panels Additional light package Custom colors Seawater paint coating OPERATORS CAB (maxcab) Hydraulic elevating cab system E Multi adjustable, air suspended operators seat ( mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 1 V / V power outlet Windshield wiper and washers Emergency exit hammer Safety lever Sun shades OPERATORS CAB (maxcab) Interior lighting Rain cover front window Outside mirror Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maxcab industry Windshield protection guard Skylight protection guard Skylight FOPS guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E/ Operators cab with floor window Additional cameras UNDERCARRIAGE Heavy duty designed material handling under carriage Crawler under carriage with mechanical adjustable tracks Heavy duty crawler track frame. ( mm) triple grouser track shoes, canted Maintenance free crawlers B Hydraulic chain tension device Travel alarm 1. (8 mm) triple grouser track shoes, canted. ( mm) forged flat track shoes, canted Crawler under carriage with hydraulic adjustable tracks WORKING EQUIPMENT Purpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears Boom position MAGNET SYSTEM Hydraulic driven generator Magnet controller Magnet suspension link ATTACHMENTS Orange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler Live heel SWING SYSTEM protection cover, removable Manual operated swing gear pinion lubrication system Subject to technical modification. Standard Equipment Optional Equipment

4 8 R-HD E Lift Capacities K1-1 1 [.] 19, 1,1 19, [.] 1, [.] 11, M E [19.],1 [1.],18 [.] [1.9] 1,, [.8],11,8 [.9],8 [1.],11 [1.] 9, [1.],18 [1.],11 [9.] [11.] 19,81,9 19, [9.] 1,1 [.], [.1], [.],18 [11.],1 [11.], [1.1], [1.],11 [1.], [9.8] 1, [8.] 19,18 19, [8.9] 19,1 [9.1], [9.], [9.] 1,8 [9.9] 1,8 [.], [9.8] 1, [9.],8 [8.] 18,8 [.] 1,9 [.8] 1,19 [.9] 1,1 [8.] 1, [8.1] 1,8 [8.] 18,98 [8.] 18,19 [8.] 18,98 [8.1] 1,8 [.] 1, [.] 1, [.] 11, [.9] 1,1 [.] 1, 1, 1, [.] 1,8 [.] 1,8 1, [.] 1,9 [.] 1, [.] 1,9 [.] 1,8 [.] 1, [.] [.] 9,91 [.] [.] 11,9 [.] 11,8 [.] 11,,11 [.] 8, machine shown in mirror image Working Equipment K1-1 reach 1'" (1.9 m) boom 9'" (9.1 m) stick '8" (.9 m) boom pos. 1 Operator s Cab model E maxcab hydraulic elevating up 8'8" (. m) elevation eye level approx. 19' (.8 m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

5 8 R-HD E Lift Capacities 8 M E [19.1],8 [1.] 1, 9,9 [.],9 [.] 8,1 machine shown in mirror image [.9] 1,1 [1.] 8, [1.],8 [1.8],8 [1.9], [.] [11.] 1,9,1 [.] [.] 1,,9 [.] 1,9 [.8] 1, 1,8 [9.] 1,8 [.1], [.],9 [11.1],1 [11.], [11.], 1, [.9] 1,1 [8.] 18,8 [8.] 18,8 [8.] 18,19 [8.] 18,9 [8.9] 19,1 [9.],8 [9.], [9.], [9.],8 19, [9.] [8.],9 1, [.9] 1,1 1, [.] 1,9 [.] 1,9 [.] 1,1 [.] 1, [.] 1,9 [.8] 1,19 [.9] 1,1 [.9] 1,1 [.] 1,9 [.] 1,9 [.] 1,1 [.8] 1,8 [.8] 1,8 [.] 1, [.] 1, [.] 1, [.] 1, [.] 1,1 [.] 1,1 [.] 1, [.] 1,9 [.] 1, [.9],8 [.] 11,9 [.8] 1,8 [.] 1, [.] [.], [.] 8,818,11 [.] 11,8 [.] 11,8 [.] [.] [.1] 11, [.] 11, [.8],8 9, [.9] 8,89 K18-1 [.] 9,8,11 [.] 9,91 9, 9,9 [.9] 8,98 [.], Working Equipment K18-1 reach '8" (1.8 m) boom '" (.1 m) stick '11" (.9 m) boom pos. 1 Operator s Cab model E maxcab hydraulic elevating up 8'8" (. m) elevation eye level approx. 19' (.8 m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

6 8 R-HD E Lift Capacities [.] [1.] 1, 9,1 [.],9 [.], [.],9 [.1] 9,9 [11.],1 [1.], 19, [.] 1, [.] 1, [8.] 18,9 [9.],8 [9.] 1,8 [.],8 [.],18 [.],98 [9.9] 1,8 19, [8.] 18,9 [.] 1,9 [.] 11,9 [.] 1, [.9] 1,1 1, [.] 1,1 [.] 1,9 [8.] 1, [8.] 18,98 [8.] 18,9 [8.] 18,9 [8.] 18,98 [.9] 1,1 [.] 1,8 [.] 1,1 1,8 1,8 [.] 1,9 [.] 1,9 [.] 1, [.] 1, 1, 1, [.9] 1,1 [.] 1, 1,8 [.] 11,9 [.] 8,818 [.] 1,1 [.] 1,1 [.] 1,1 [.] 1, [.] 1, [.8] 1,8 [.] 1,8 1,8 1,8 [.] 1, [.],11 [.8] 8, [.] 11, [.] 11, [.1] 11, [.1] 11, [.] [.] [.] 11,8 [.] 11,8 [.] [.1] 11, [.9],8 [.] 9,91 [.9] 8,98,11,11,11 [.], [.], [.], [.],,11 9, 9,9 [.8] 8, [.], B18-1 9,9 9,9 9,9 9,9 [.1] 9,9 [.] 8,818 [.8] 8, [.], machine shown in mirror image Working Equipment B18-1 reach 8'" (1.8 m) boom '" (.8 m) stick '11" (.9 m) boom pos. 1 Operator s Cab model E/ maxcab hydraulic elevating up & out (optional item) eye level approx. '" (. m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

7 8 R-HD E Lift Capacities [8.] 18,19 [8.] [.] 18,9 1, [8.] 18,9 1, K1-1 ULM [1.] [1.8] [.] 9,1 8,19, [19.] [1.8] [.8],8,,8 [.] [1.] [11.1],9,18,1 [.] [1.] [11.],1,18,9 [.1],8 [.8] 8, [1.], [8.] [.] 19,18,89 [9.] [8.1] [.9], 1,8 1,1 [9.] [8.] [.] [.], 1, 1, 1,9 [9.] [8.1] [.] [.] [.],9 1,8 1, 1,9 [9.8] [8.] [.] [.] 1, 18,98 1, 1,9 11,9 [8.] [.] [.] [.] 18,9 1,8 1,9 11,9 [.] [.] [.] 19, 1,9 1,9 11,8 [8.9] [.] [.] [.] 19,1 1,1 1,9 [8.9] [.] [.] [.] 19,1 1,9 1,8 11, [8.] [.] [.] 18,9 1, 1,,11 [.] [9.8] [.9] [.] [.] 1, 1, 1,1 1,9 [.8] [8.] [.] 1,19 18,98 1, 9, [.1] 9,9 [.], [.] 9,8 9, 9,9 [.9] 8,98 [.], machine shown in mirror image Working Equipment K1-1 ULM reach '11" (1. m) boom 9'" (9.1 m) stick 1'8" (. m) ULM boom pos. 1 Operator s Cab model E maxcab hydraulic elevating up eye level approx. 19' (.8 m) Undercarriage model T1/8 tracks B triple grouser shoes." ( mm) Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO and do not exceed % or tipping and 8% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for with standard grousers and fully extended tracks. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

8 Transport dimensions '" () 1'1" (,) 9'8" (,) 19' (,8) 8'" (,) '8" (,9) '" () '" (,1) '" (1,) 1'" () '" (,) 9'8" (,) 1'" (,8) 1'8" (,) 1'" (,) 1'" (,) '" (1,) Reach Boom Length Stick Length Transport Length Transport Height H1* Transport Height H1/** Transport Width K1-1 9'" (9, mm) '8" (,9 mm) '" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) K18-1 '" (, mm) '11" (,9 mm) '" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) B18-1 '" (,8 mm) '11" (,9 mm) 9'" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) K1-1 ULM 9'" (9, mm) 1'8" (, mm) '" (1, mm) 11'" (, mm) 11'" (, mm) 9'" (, mm) transport dimensions valid for boom position 1 only boom bosition may increase transport height & transport length handrails, catwalks & other accessories are disassembled for transportation *optional cab E/ will increase machine transport height by " ( mm) **only valid with 8" ( mm) rise of machine and/or clearance for boom/stick lowering Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. See your SENNEBOGEN dealer for further information. 1 SENNEBOGEN LLC, all rights reserved, printed in USA SENNEBOGEN LLC 19 Sennebogen Trail Stanley, NC 88, USA Phone +1 () -9 Fax +1 () R-HD/E-1 GO FOR GREEN

Technical Specifications SENNEBOGEN Track Material Handler

Technical Specifications SENNEBOGEN Track Material Handler Technical Specifications SENNEBOGEN Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB., Tier Final HP (18 kw) Reach standard optional '1" (1. m) (stick pin) '" (1 m)

More information

Technical Specifications SENNEBOGEN Demolition Machine

Technical Specifications SENNEBOGEN Demolition Machine Technical Specifications SENNEBOGEN Demolition Machine Leading Through Innovation Engine Model Net Power Cummins QSB.7 Tier Final HP (18 kw) Operating Weight Approx. 9,78 lb (3,9 kg) Technical Specifications

More information

Technical Specifications Sennebogen Track Material Handler

Technical Specifications Sennebogen Track Material Handler Technical Specifications Sennebogen Track Material Handler Leading Through Innovation Engine Model Net Power Cummins QSX1-C, Tier i HP (391 kw) Reach standard optional 9'" (1.1 m) (stick pin) up to 3'"

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (

More information

preliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine

preliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine Technical Specifications SENNEBOGEN Tracked Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight R/Crawler Undercarriage Cummins QSB., Tier Final 13 HP (97 kw)

More information

Technical Specifications

Technical Specifications Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb

More information

PRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation

PRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Cummins QSG1, Tier Net Power HP (1 kw) Reach standard optional '" (1. m) (stick pin) '8" (19.1

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach

More information

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation. Reach 69' (21 m) (stick pin)

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation. Reach 69' (21 m) (stick pin) Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional ' (18 m) (stick pin) 9' (1

More information

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation

PRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL1, Tier Final 3 HP (8 kw) Reach standard 9'1" (18 m) optional 7'" (3 m) Operating

More information

Material Handling Machine

Material Handling Machine Leading Through nnovation HP Material Handling Machine, lbs. (M), lbs. (R-HD) Leading Through nnovation Sennebogen Hydroclean This system, using a micron filter, keeps the hydraulic circuit free from water

More information

132 HP 54,000 lbs. C Series. green line Material Handling Machine

132 HP 54,000 lbs. C Series. green line Material Handling Machine 1 HP, lbs. C Series green line Material Handling Machine Working radius up to ' No computers required to control hydraulic system Ultra fine hydraulic oil filtration system reduces maintenance cost and

More information

266 HP 94,500 lbs. C Series. green line Material Handling Machine

266 HP 94,500 lbs. C Series. green line Material Handling Machine 266 HP 94, lbs. C Series green line Material Handling Machine Working Attachments Scrap Shear Rehandling Grab Timber Grab Scrap Grapple Magnet Hook Concrete Crusher Recycling and Demolition Grab Concrete

More information

B35R-HD C Series. ~ 112,650 Ibs. ~ 266HP. green line Material Handling Machine LEADING THROUGH INNOVATION

B35R-HD C Series. ~ 112,650 Ibs. ~ 266HP. green line Material Handling Machine LEADING THROUGH INNOVATION 266HP 112650 bs. B35R-HD C Series green line Material Handling Machine LEADNG HROUGH NNOVAON 5EtlJEBDGEN'!!Jrr-:.m Bg[jfJ B35R-HO Working Attachments Scrap Shear Rehandling Grab '(J Scrap Grapple imber

More information

Undercarriage. Lubricant and Coolant Capacity. Travel System

Undercarriage. Lubricant and Coolant Capacity. Travel System MATERIAL HANDLER Operating Weight: 76,49 lbs (8, kg) SAE Net Horsepower: with fan pump 49 HP (69 kw) without fan pump HP (97 kw) Swing Torque: 96,6 lbf-ft. (66. kn m) Engine Isuzu AH-6WGXYSS- Tier turbocharged

More information

Doosan Infracore DX225LL TECHNICAL DATA

Doosan Infracore DX225LL TECHNICAL DATA Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

litronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw

litronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw Log Loader A 934 C HD litronic` Operating Weight: 80,30 83,000 lb Engine Output (SAE J1349): 201 HP / 10 kw Engine Output (ISO 9249): 204 HP / 10 kw Technical Data Engine Rating per SAE J1349 201 HP (10

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

MATERIAL HANDLER MHL320 D. Specifications. Features

MATERIAL HANDLER MHL320 D. Specifications. Features MHL D MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach, lbs 9 t hp kw Up to ft. m Features Fuel efficient and powerful, the hp kw turbo diesel engine enables movement of loads

More information

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 95 B HD litronic` Machine for Industrial Applications Operating Weight 138,88 151, lbs Engine Output HP ( kw) Technical Data Engine Rating per ISO 99 HP ( kw)

More information

A 944 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 944 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 944 B HD litronic` Machine for Industrial Applications Operating Weight 106,300 116,000 lbs Engine Output 245 HP (180 kw) Technical Data Engine Rating per ISO

More information

224 kw. 54,5 t. Crawler material handling machine 20 m. TIER IVf

224 kw. 54,5 t. Crawler material handling machine 20 m. TIER IVf 4 kw 54,5 t Crawler material handling machine 0 m TIER IVf Further developed. The E-Series. The characteristics of the E-Series 0 years of experience in the design and construction of hydraulic material

More information

A 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 9 B litronic` Machine for Industrial Applications Operating Weight 67,7 7,98 lbs Engine Output 97 HP ( kw) Technical Data Engine Rating per ISO 99 97 HP ( kw)

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m

MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m MHL35 E MATERIAL HANDLER Specifications Standard Machine Weight Engine output Reach 75, lbs 34 t 215 hp 16 kw Up to 52.5 ft 16 m Features Fuel saving ECO & ECO+ operating modes enhance flexibility while

More information

PURPOSE-BUILT FROM THE GROUND UP MATERIAL HANDLER. Cummins QSB 4.5 Tier 4F 160 HP (119 kw) Rubber Tired (M) 47,180 lb (21,400 kg)

PURPOSE-BUILT FROM THE GROUND UP MATERIAL HANDLER. Cummins QSB 4.5 Tier 4F 160 HP (119 kw) Rubber Tired (M) 47,180 lb (21,400 kg) PURPOSE-BUILT FROM THE GROUND UP MATERIAL HANDLER Cummins QSB 4.5 Tier 4F 160 HP (119 kw) Rubber Tired (M) 47,180 lb (21,400 kg) Purpose-Built To Suit Your Purpose By building simply, we can build flexibly.

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

Heavy Duty Crawler Crane SC-50 HD

Heavy Duty Crawler Crane SC-50 HD Heavy Duty Crawler Crane SC-50 HD LIFTING APPLICATION Operating weight (c/w 11 m boom and jib) 49000 kg 258822 lb TECHNICAL DATA SHEET Diesel engine Cummins QSB6.7 Cummins QSB6.7 - Max Rated Power 201

More information

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw)

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw) Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 69,88 73,63 Engine Output 197 HP (14 kw) Technical Data Engine Rating per ISO 9249 197 HP

More information

FORESTRY. For Use in Log-Loading, Road Building and Harvester Processing Applications. Engine. Cab and Controls. Undercarriage

FORESTRY. For Use in Log-Loading, Road Building and Harvester Processing Applications. Engine. Cab and Controls. Undercarriage FORESTRY For Use in Log-Loading, Road Building and Harvester Processing Applications Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 4-cylinder, water-cooled, EGR

More information

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) 925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator

More information

R 924 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications

R 924 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator R 924 B litronic` Machine for Industrial Applications Operating Weight 9,63 66, lb Engine Output 173 HP (127 kw) Technical Data Engine Rating per ISO 9249 173

More information

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34. 922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt

More information

MATERIAL HANDLER MHL360 F HD. Features. Specifications

MATERIAL HANDLER MHL360 F HD. Features. Specifications MHL360 F HD MATERIAL HANDLER Features Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic functions

More information

313F/313F L Hydraulic Excavator Specifications

313F/313F L Hydraulic Excavator Specifications Engine Drive Engine Model Cat C4.4 ACERT Gradeability 30 /70% Net Power SAE J1349/ISO 9249 68 kw (92 PS) Maximum Travel Speed 5.4 km/h Engine Power ISO 14396 74 kw (101 PS) Maximum Drawbar Pull 113 kn

More information

324D/ 324D L. Hydraulic Excavator. Engine Engine Model. ACERT Technology. Net Flywheel Power Weights. Std. Undercarriage. Long Undercarriage

324D/ 324D L. Hydraulic Excavator. Engine Engine Model. ACERT Technology. Net Flywheel Power Weights. Std. Undercarriage. Long Undercarriage D/ D L Hydraulic Excavator Engine Engine Model Net Flywheel Power Weights Operating Weight Std. Undercarriage Operating Weight Long Undercarriage Cat C with ACERT Technology 0 kw 0 kg 0 kg Engine Engine

More information

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier NET HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 28610 kg 63,074 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier PC 200 LL FORESTRY MACHINE Local

More information

Energy 13 m. TIER IVf emission. standards

Energy 13 m. TIER IVf emission. standards t Energy 13 m TIER IVf emission standards PRELIMINARY Technical data, equipment MACHINE TYPE Model (type) 718 Power Model Cooling Air filter Design UPPERCARRIAGE Central lubrication Electrical system Safety

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

EQUIPMENT ENGINE HYDRAULIC SYSTEM

EQUIPMENT ENGINE HYDRAULIC SYSTEM EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2

More information

268 kw (Stage IIIa) 261 kw (Stage V) 250 kw (Electro) 68.5 t. 21 m. Crawler material handler. Stage V

268 kw (Stage IIIa) 261 kw (Stage V) 250 kw (Electro) 68.5 t. 21 m. Crawler material handler. Stage V 268 kw (Stage IIIa) 261 kw (Stage V) 250 kw (Electro) 68.5 t Crawler material handler 21 m Stage V Advanced. The E-Series What makes up the E-Series 1962: rope-driven S833 with elevated operator cab 65

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

Technical description LR 622 Crawler loader

Technical description LR 622 Crawler loader Technical description LR 622 Crawler loader Engine output 97 kw/132 HP Operating weight 15.4 17.0 t /34,000 37,500 lb Bucket capacity 1.54 1.80 m 3 /2.01 2.35 cu.yd. Hydrostatic travel drive with electronic

More information

MATERIAL HANDLER MHL360 E. Specifications. Features. Up to 59 ft 18 m

MATERIAL HANDLER MHL360 E. Specifications. Features. Up to 59 ft 18 m MHL36 E MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach Features 1,5 lbs 46 t 255 hp 19 kw Up to 59 ft 18 m Fuel saving ECO & ECO+ operating modes enhance flexibility while

More information

Machine for Industrial Applications

Machine for Industrial Applications Machine for Industrial Applications A 9 C litronic` Operating Weight: 8, 8, lb Engine Output: hp / kw Technical Data Engine Rating per ISO 99 hp ( kw) at 8 rpm Model Liebherr D 9 L according to level IIIA

More information

Doosan Infracore DX700LC TECHNICAL DATA

Doosan Infracore DX700LC TECHNICAL DATA Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)

More information

PRELIMINARY 10 / kw / 168 kw. 120 t. Telescopic Crawler Crane. 40 m. TIER IVf

PRELIMINARY 10 / kw / 168 kw. 120 t. Telescopic Crawler Crane. 40 m. TIER IVf 164 kw / 168 kw 120 t Telescopic Crawler Crane 40 m TIER IVf Technical data - equipment MACHINE TYPE Model (type) 6113 Automatic central lubrication for boom pivot winch drum bearing Pinion lubrication

More information

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m) CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

CRAWLER EXCAVATORS EH160 LC. Specifications.

CRAWLER EXCAVATORS EH160 LC. Specifications. CRAWLER EXCAVATORS Specifications EH160 LC www.newhollandconstruction.com EH160 LC MACHINE DIMENSIONS A M C E I F L G H D K J B Standard Arm Optional Arm Arm Length 10 2 (3.10 m) 8 6 (2.60 m) A. Overall

More information

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel

More information

A 934 C HD. Machine for Industrial Applications

A 934 C HD. Machine for Industrial Applications Machine for Industrial Applications A 934 C HD litronic` Operating Weight: 9,7 93, lb Engine Output (SAE J1349): 21 HP / kw Engine Output (ISO 9249): 24 HP / kw Technical Data Engine Rating per SAE J1349

More information

97/119 kw. 23.9/25.1 t. Mobile material handling machine 9 12 m. Tier 3b emission standards

97/119 kw. 23.9/25.1 t. Mobile material handling machine 9 12 m. Tier 3b emission standards 97/119 kw 23.9/25.1 t Mobile material handling machine 9 12 m Tier 3b emission standards Advanced. The E-Series. 1962: Rope-driven S833 with elevated operator cab What makes up the E-Series 60 years of

More information

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,

More information

316E. Hydraulic Excavator

316E. Hydraulic Excavator E Hydraulic Excavator Introduction Since its introduction in the 990s, the 00 Series family of excavators has become the industry standard in general, quarry, and heavy construction applications. The all-new

More information

EC460 VOLVO EXCAVATOR LONG CRAWLER

EC460 VOLVO EXCAVATOR LONG CRAWLER VOLVO EXCAVATOR EC460 LONG CRAWLER Engine power, gross: 239 kw (321 hp) Operating weight: 44.3 ~ 46.0 t Buckets (SAE): 1900 ~ 2300 l Low-emission, turbocharged Cummins diesel engine with direct injection

More information

EC140C VOLVO EXCAVATOR. 28,110 32,370 lb, 92 hp

EC140C VOLVO EXCAVATOR. 28,110 32,370 lb, 92 hp EC140C VOLVO EXCAVATOR 28,110 32,370 lb, 92 hp SPECIFICATIONS Engine The Volvo diesel engine delivers lower emissions, along with superior performance and fuel efficiency. The EPA Tier 3 compliant engine

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

Isuzu BB-6BG1T 396 CID (6.5 L) 138 HP (103 1,950 rpm 392 lbf ft (532 1,600 rpm

Isuzu BB-6BG1T 396 CID (6.5 L) 138 HP (103 1,950 rpm 392 lbf ft (532 1,600 rpm Specifications Engine Electronic engine control, water cooled, 4-cycle diesel, 6 cylinder, turbocharged. Model Displacement Net horsepower Torque 210TL 240TL 290TL 350TL 370TL Isuzu BB-6BG1T 396 CID (6.5

More information

TOUGH WORLD. TOUGH EQUIPMENT.

TOUGH WORLD. TOUGH EQUIPMENT. Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E

More information

PRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards

PRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards 9 kw 1 t Telescopic crawler crane m Tier IV emission standards Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged

More information

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52. MHL35 E TIER 4i MATERIAL HANDLER Specifications Operating weight 7,548-78,264 lbs (32 35.5 t) Engine output 214 hp (16 kw) Reach up to 52.5 ft (16 m) Features Fuel efficient high output engine with a reduction

More information

FORESTRY MACHINE PC300LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top

FORESTRY MACHINE PC300LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top NET HORSEPOWER 180 kw 242 HP @ 1900 rpm OPERATING WEIGHT 42941 kg 94,669 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top PC 300 LL FORESTRY MACHINE Local option included

More information

Technical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3

Technical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3 Technical Description Hydraulic Excavator A B Operating Weight,, t Engine Output kw ( HP) Bucket Capacity,, m Technical Data Engine Deutz-Diesel engine Rating per ISO kw ( HP) at RPM Model BF M E Typ cylinder-in-line,

More information

320F L Hydraulic Excavator Specifications

320F L Hydraulic Excavator Specifications Engine Engine Model Cat C4.4 ACERT Engine Power SAE J1995 122 kw 164 hp Net Power SAE J1349 120 kw 161 hp Engine rpm Operation Travel 1,800 rpm 1,800 rpm Bore 105 mm 4.13 in Stroke 127 mm 5.00 in Displacement

More information

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 31,7 33,4 t Engine Output 145 kw (197 HP)

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 31,7 33,4 t Engine Output 145 kw (197 HP) Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 31,7 33,4 t Engine Output 14 kw (197 HP) Technical Data Engine Rating per ISO 9249 14 kw

More information

308E. Mini Hydraulic Excavator

308E. Mini Hydraulic Excavator 308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000

More information

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump 14 Engine Base engine for use in the U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere PowerTech PWX John Deere 4045H Non-Road

More information

SK210LC-10. Inquiries To:

SK210LC-10. Inquiries To: SK210LC-10 Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of

More information

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted CX210C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Fuel Type Cylinders Isuzu AM-4HK1X Tier 4 Interim Certified (Cooled EGR) Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified

More information

EC240 VOLVO EXCAVATOR. Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t ~ lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.

EC240 VOLVO EXCAVATOR. Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t ~ lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2. VOLVO EXCAVATOR EC240 Engine power, gross: 134 kw 180 hp Operating weight: 23.5~24.3t 51820 ~ 53660 lb Buckets (SAE): 1050 ~ 1876 l 1.37 ~ 2.45 yd 3 Low-emission, turbocharged Cummins diesel engine with

More information

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51 CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349

More information

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R.

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R. CRAWLER DOZERS EPA Tier 3/EU Stage IIIA STANDARD, LGP ENGINE Make and model Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Cummins QSB3.3 EPA Tier 3/EU Stage IIIA 3.3 l (199

More information

307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.

307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55. 307E2 Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights

More information

R 944 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating Weight 39,2 41,6 t Engine Output 180 kw (245 HP)

R 944 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating Weight 39,2 41,6 t Engine Output 180 kw (245 HP) Technical Description Hydraulic Ecavator R 9 B litronic` Machine for Industrial Applications Operating Weight 39, 1,6 t Engine Output 18 kw (5 HP) The Better Machine. Engine Rating per ISO 99 18 kw (5

More information

303 CR. Mini Hydraulic Excavator

303 CR. Mini Hydraulic Excavator 303 CR Mini Hydraulic Excavator Engine Power Gross 20.2 kw 27.1 hp Net 19.5 kw 26.1 hp Maximum Operating Weight With cab 3420 kg 7524 lb With canopy 3330 kg 7326 lb 303 CR Mini Hydraulic Excavator Designed

More information

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp)

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp) ZAXIS DASH-5 utility-class EXCAVAtORS ZX250lC-5 140 kw (188 hp) ZX250lC-5 ZAXIS DASH-5 utility-class EXCAVAtORS Engine ZX250LC-5 Manufacturer and Model Isuzu 4HKIZXSA-01 Non-Road Emissions Standards EPA

More information

305 CR. Mini Hydraulic Excavator

305 CR. Mini Hydraulic Excavator 305 CR Mini Hydraulic Excavator Engine Power Gross 32 kw 43 hp Net 31.3 kw 42 hp Maximum Operating Weight With cab 4990 kg 11,000 lb With canopy 4940 kg 10,890 lb 305 CR Mini Hydraulic Excavator Designed

More information

EC360B Lc EC360B NLC. more care. built in. VOLVO EXCAVATOR. Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38.

EC360B Lc EC360B NLC. more care. built in. VOLVO EXCAVATOR. Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38. VOLVO EXCAVATOR EC360B Lc EC360B NLC Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38.4 t Turbocharged VOLVO diesel engine with water cooling, direct injection and

More information

Machine for Industrial Applications

Machine for Industrial Applications Machine for Industrial Applications A C litronic` Operating Weight:,, lb Engine Output: hp / kw Technical Data Engine Rating per ISO hp ( kw) at rpm Model Liebherr D S according to level IIIA / Tier Type

More information

Specifications R220LC-9A / R220NLC-9A

Specifications R220LC-9A / R220NLC-9A Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel

More information

CX80C OPERATOR ENVIRONMENT

CX80C OPERATOR ENVIRONMENT CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder

More information

ZAXIS. 210/210LC-5 n 119 kw (159 hp)

ZAXIS. 210/210LC-5 n 119 kw (159 hp) n 119 kw (159 hp) EnginE Manufacturer and Model... Isuzu 4HK1 Non-Road Emission Standards... certified to IT4 / Stage IIIB emissions Net Rated Power (ISO 9249)... 119 kw (159 hp) @ 1,900 rpm Cylinders...

More information

301.5, 301.6, Mini Hydraulic Excavator

301.5, 301.6, Mini Hydraulic Excavator 301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 28,440 (12,900 kg) SAE Net Horsepower: 95 HP (71 kw) Bucket Range:.42 -.98 yd 3 (.32 -.75 m 3 ) Engine Isuzu AJ-4JJ1X Tier 3 turbocharged diesel engine with electronic fuel control, 4-cylinder,

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards

More information

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade

More information

CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED

CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel tolerant Water-cooled,

More information