PRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards

Transcription

1 9 kw 1 t Telescopic crawler crane m Tier IV emission standards

2 Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly specialized telescopic cranes Uncompromisingly high performance in all areas Technology that can be mastered: High-quality components without over-engineering Long service life and high value stability Save fuel reduce operating costs Work quietly protect operator and environment Peak performance Robust boom system work on an incline of up to High cable speed Maximum usability multicab work in comfort SENCON work program selection made easy Flexibility in service Operate under full load less space required Easy transport Telescopic undercarriage ready to go in no time short-set-up time Maintenance and service made easy SENNEBOGEN control system easy error diagnostics Simple maintenance clear labeling Consultation and support in your area 3 production sites subsidiaries 130 sales partners over 350 service stations

3 3

4 Technical data, equipment MACHINE TYPE Model (type) 13 Model ENGINE Cooling Fuel tank DEF tank Electr. system Batteries Options Design FPT N5, 9 kw / 5 hp at,00 rpm Compliant with Tier f emission standards FPT N5, 9 kw / 5 hp at,00 min Compliant with Tier 3a emission standards Direct injection, turbo-charged, charge air cooling, reduced emissions Water-cooled With water separator and heating system automatic dust discharge, main element and safety element, contamination indicator 00 l 3 l V x 155 AH Low temperature package with engine pre- Electric fuel pump UPPERCARRIAGE Electrical system Cooling system Safety Options Torsion-resistant box design, precision-crafted, steel bushings for boom bearings. Extremely service-friendly design, longitudinal engine Central electrical distributor, battery disconnect switch 3-circuit cooling system with high cooling capacity, electronically regulated fan drive for water, charge air and oil cooler Rearview and right sideview cameras, LED lighting package Additional LED headlights Up to additional cameras Maritime climate varnishing as corrosion protection Low temperature package Automatic central lubrication for boom track and winch drum bearing Pinion tooth lubrication for slewing ring Gearbox HYDRAULIC SYSTEM Pump unit mounted directly on diesel engine. Load sensing/ LUDV hydraulic system, electrohydraulic pilot-controlled work functions, load limit sensing control Pump type Axial piston variable displacement pump. The independent, proportional allocation of the pump quantity allows several work functions to be controlled with precision simultaneously and independently from one another Pump control Operating pressure SLEWING DRIVE Slewing gear brake Slewing ring Slewing speed Zero-stroke control, speed-dependent adjustment of drive pump and axial piston regulator. Auxiliary functions via gear wheel pump. max. 330 bar Filtration interval Hydraulic tank 10 l Control system Servo joystick operation for work movements. Safety Options Hydraulic circuits secured with safety valves. scoping cylinders Bio-oil environmentally friendly SENNEBOGEN HydroClean 3 μm hydraulic Hydraulic tank preheater Compact planetary gear with hydraulic and electric rotor, integrated brake valves Spring-loaded disk brake, pedal for individual braking Oversized slewing ring, sealed. Highly precise, powerful slewing function. 0 rpm, variable Subject to change. Additional options available upon request.

5 Technical data, equipment Design ATTACHMENTS Telescopic boom Hoisting winch Safety brake Crane safety Cylinders Options CAB Cab type Cab equipment Options MultiCab, can be elevated 1.75 m Hydraulically elevating cab as standard. Flexibly mounted comfortable cab with super sound insulation. All-weather design, all-round glazing in safety glass and large roof window, adjustable windshield. Flexibly mounted comfortable seat, adjustable according to weight and shock-absorbent. Dashboard overview with swiveling steering column. Variable, controllable cab heating automatic climate control Auxiliary heating system with timer Protective roof grating FOPS protective roof grating Radio with USB and SD connection, MP3 and Bluetooth function Decades of experience and the latest computer simulations guarantee maximum stability and service life. 3-part with pulley head, hydraulic telescoping. Slant-axis hydraulic motor drive with compact planetary gear, 35 kn traction, 0 95 m/min. cable speed, 1 mm cable diameter. Spring-loaded disk brake Next-generation load moment monitoring, straightforward panel displaying all important data through SENCON display, lifting limit switch, cable exit protection, pressure relief valves and pipe fracture safety device with Eventrecorder Hydraulic cylinders with high-quality sealing and guide elements 5 m mely fast and easy setup without auxiliary devices, locked on basic boom when not in use Design Drive UNDERCARRIAGE Parking brake Traveling gear Speed Options Mass Very strong, hydraulically telescoping crawler undercarriage, with integrated, protected drive transmission Strong travel drive featuring -stage variabledisplacement hydraulic motor with direct-mounted, automatically actuated brake valve and compact planetary gear on each running gear side Spring-loaded disk brake Maintenance-free tractor running gear with hydraulic chain tension, 00 mm 3-grouser base plates 0 1. / 0. km/h Available base plate types: 700 mm 3-grouser base plates 00 mm 3-grouser base plates OPERATING WEIGHT 13 R With 1. m telescopic boom, 3-grouser base plates 00 mm approx.,300 kg 700 mm approx.,50 kg 00 mm approx. 5,000 kg Operating weight varies by model. Subject to change. Additional options available upon request. 5

6 Crane equipment 1. m main boom (HA) Comments:. The load ratings apply to the 13 R with extended crawler undercarriage (3,000 mm track); the load ratings in brackets ( ) apply when the crawler undercarriage is retracted (1,0 mm track). 3. The load ratings take into account the standards DIN and ISO 305. The weight of the load handling devices (e.g. hook, suspension gear) must be subtracted from the load ratings. 5. Load ratings must be limited or reduced when conditions are unfavorable, such as soft or uneven ground, slopes, wind, lateral loads, swinging loads, jerking or sudden stopping of load, operator inexperience, driving with load.. Permissible rope winch per strand in crane mode for cable diameter 1 mm 3,500 kg 7. Load ratings indicated with * apply only in the case of special equipment. currently valid load ratings can be found in the tables in the operating manual ,m 1,0m 13,m,3m 7,5m [m] m main boom (HA) Boom length [m] Outreach [m] (.0) (.3).0 (.).0. (5.3).0 (5.3).0 (5.) (3.7). (3.).0 (3.).0 (3.9) (3.) 7. (3.) 7. (3.).0 (3.).5 (3.) (.9) /.0 m.7 (.9).7 (.9) 5.9 (.9).5 (.9) (.3) 5.3 (.3) 5. (.3).5 (.3).0. (1.).3 (1.).3 (1.).1 (1.9) (1.5) /. m 3.5 (1.5) 3. (1.5) 3. (1.5) (1.) 3.0 (1.) 3.0 (1.) (1.0). (1.0). (1.0).0. (0.9) / 11. m. (0.).3 (0.) (0.7).0 (0.7) (0.) 1.7 (0.) (-) / 1. m Table no.: 13R-HD/1./75/1703(153)/.1/ / 17.3 m Subject to change.

7 Crane equipment 1. m main boom (HA) ,m 1,5m 30,3m,m 0,1m 1. m main boom (HA) [m] 0 Boom length [m] Outreach [m] (.0) (.0) 13.0 (.0) (.3) 13.0 (.3) 11.0 (.).0. (5.3).9 (5.).5 (5.).3 (5.).5 (5.).5 9. (.) 9. (.) 9. (.) 7. (.).3 (.) (3.9).7 (3.9) 7. (3.9).1 (3.9).0. (.9). (3.0).3 (3.0) 5.3 (3.0) (.5) /.7 m 5.3 (.) 5. (.). (.).0.3 (1.9). (1.9).1 (.0) (1.) /. m 3.7 (1.) 3.7 (1.) (1.3) 3.1 (1.) (1.1) /.9 m.7 (1.1).0.3 (1.0) Table no.: 13R-HD/1./75/1703(153)/.1/ (0.) 1 Hook Capacity Weight Cable reeving and maximum load rating t (-pulley) 10 kg 17,500 kg 1,000 kg,500 kg 7,000 kg 3,500 kg for main boom.5 t (1-pulley) 0 kg,500 kg 7,000 kg 3,500 kg for main boom t 0 kg 5,000 kg Subject to change. See page for notes on load lift charts. 7

8 Crane equipment (SA) ,m ,m m HA 5.0 m SA [m] Outreach [m] Telescopic boom length [m] (3.). (.) (3.3) 3. (3.). (.0).0.9 (.9).0 (.0) 3. (3.1) 3. (3.0) 3. (3.0) (.5) 1.9 (1.9) 3.1 (.).0 (.0) 3. (.) 3.5 (.3).7 (.3).0. (.1) 1.9 (1.9). (.0).0 (.0) 3.1 (1.9).0 (1.9) 3. (1.9).7 (1.) (1.7) 1. (1.7).5 (1.) 1.9 (1.). (1.5).0 (1.5).9 (1.5) 1.9 (1.5). (1.5) (1.). (1.3) 1.9 (1.3).5 (1.3) 1.9 (1.3). (1.) 1.9 (1.). (1.) 1.9 (1.) (1.1) 1. (1.1).3 (1.0) 1.9 (1.0). (1.0) 1.9 (1.0). (0.9) 1.9 (0.9).0 1. (0.9). (0.) 1. (0.). (0.) 1.9 (0.).0 (0.) 1.9 (0.) (0.7).0 (0.7) 1. (0.7).0 (0.) 1. (0.) 1.9 (0.) 1. (0.) (0.) 1.7 (0.5) 1.7 (0.5) Table no.: 13R-HD/1./75/1703/.1/0.0 SA Table no.: 13R-HD/1./75/153/.1/0.0 SA5 0.7 Subject to change. See page for notes on load lift charts

9 Crane equipment (SA) ,m ,3m 0,1m 1. m HA 5.0 m SA [m] Outreach [m] Telescopic boom length [m] (.) (3.5).0 (.0) (3.0) 3.5 (3.5) 3.7 (3.7).0 (.).0.5 (.) 1.9 (1.9) 3.0 (3.0).0 (.0) 3. (3.1) 3. (3.0) 3.5 (3.0) 7.0. (.) 1.9 (1.9).7 (.5).0 (.0) 3.0 (.).0 (.0) 3.3 (.) 3. (.) (1.9) 1. (1.). (.0) 1.9 (1.9).7 (.0).0 (.0) 3.0 (1.9).0 (1.9) 3.0 (1.9) (1.7).1 (1.7) 1. (1.7).5 (1.) 1.9 (1.). (1.) 1.9 (1.).7 (1.).0 (1.) (1.). (1.3) 1.9 (1.3).5 (1.3) 1.9 (1.3).5 (1.3) 1.9 (1.3) (1.).0 (1.1) 1. (1.1).3 (1.1) 1.9 (1.1). (1.1) 1.9 (1.1).0 1. (0.9).0 (0.9) 1. (0.9).0 (0.9) 1.9 (0.9) (0.) 1.9 (0.) 1.9 (0.7) 1. (0.7) (0.) 1. (0.) 1. (0.) 15.0 Table no.: 13R-HD/1./75/1703/.1/0.0 SA5 1. (0.5) 1. (0.5) 1.0 Table no.: 13R-HD/1./75/153/.1/0.0 SA5 1. Subject to change. See page for notes on load lift charts. 9

10 00 PRELIMINARY Grab equipment 1. m main boom (HA) Comments: The load ratings apply to the 13 R with maximum track width. 3. The load ratings take into account the standards DIN and ISO [m] Boom length [m] Outreach [m] Subject to change.

11 Work platform 0 0 1,m ,m 1 Work platform 1. m HA 0 The permitted load capacity for the work platform is 350 kg: persons of 0 kg each kg additional load. [m] ,m 1 Work platform 1. m HA 30,3m The permitted load capacity for the work platform is 350 kg: persons of 0 kg each kg additional load. 0 [m] 0 1 Subject to change. - 11

12 Lift fork equipment m lift fork ,m 13,m 7,5m Comments: 30 slewing angle. 3. The load ratings take into account the standards DIN and ISO The load ratings apply to loads placed in the center of the lift fork with a center of gravity that is 500 mm from the fork carriage. 5. Load ratings must be limited or reduced when conditions are unfavorable, such as soft or uneven ground, slopes, wind, lateral loads, swinging loads, jerking or sudden stopping of load, operator inexperience, driving with load. The load ratings apply to the maximum track width. 7. The load ratings in brackets ( ) apply to the minimum track width. currently valid load ratings can be found in the tables in the operating manual. [m] m lift fork - Boom length [m] Outreach [m] (1.53) (1.53) 1.3 (0.3).0.5 (1.53) 1.3 (0.3) (1.53) 1.3 (0.3) (1.53) 1.3 (0.3) (1.53) 1.3 (0.3) (1.53) 1.3 (0.3) /7.5 (1.53)/ (0.3) (0.3) (0.3) /.3 (0.3)/ / Table no.: 13R-HD/1./75/1703(153)/.1/0.0, lift fork 0.5/1. I 0% 5% 50% 75% 0% II 0% 5% 50% 75% 0% Subject to change.

13 Lift fork equipment m lift fork ,m 1 30,3m 0 [m] m lift fork Boom length [m] Outreach [m] (.0) (.0) 1. (1.) (.0) 1. (1.) 1. (0.7) (.0) 1. (1.) 1. (0.7) 1.0 (0.37) (.0) 1. (1.) 1. (0.7) 1.0 (0.37) (.0) 1. (1.) 1. (0.7) 1.0 (0.37) (1.) 1. (0.7) 1.0 (0.37) (1.) 1. (0.7) 1.0 (0.37) /. (1.) /. 1. (0.7) 1.0 (0.37) (0.7) 1.0 (0.37) /.3 (0.7)/ (0.37) (0.37) /.5 (0.37)/ / Table no.: 13R-HD/1./75/1703(153)/.1/0.0, lift fork I 0% 5% 50% 75% 0% II 0% 5% 50% 75% 0% Subject to change. See page for notes on load lift charts. 13

14 PRELIMINARY Transport dimensions 0 (Ausleger / boom 1,m) 700 (Ausleger / boom 1,m) (Ausleger / boom 1,m) 795 (Ausleger / boom 1,m) th.53 m transport wid Base plates 0 1 Subject to change. 00 mm,530 mm 700 mm,00 mm 00 mm,700 mm 00 Min. transport width Dimensions in [mm]

15 Attachments kg liters Work platform Lift fork at Subject to change. Dimensions in [mm] 15

16 PRELIMINARY Grab equipment 1. m work platform 1. m + 5 m õ Z CPPN 1 1. m lift fork 1. m crane equipment

17 17

18 Notes 1

19 Notes 19

20 by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment. All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners. expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 9315 Straubing, Germany Tel /1 Fax marketing@sennebogen.de Order no M-R-E