Ground bearing pressure. Main boom (No xx) max. length Fixed jib (No xx)

Transcription

1

2 The operating weight includes the basic machine with HD undercarriage, 2 main winches 55,200 lbs including wire ropes (295 ft) and 36 ft main boom, consisting of A frame, boom foot (18 ft) and boom head (18 ft), 58,000 lbs basic counterweight, 31.5 inch triple grouser track shoes and 110,250 lbs hook block. Total weight Ground bearing pressure approx. 192,000 lbs 14 PSI Main boom (No xx) max. length 223 ft Fixed jib (No xx) 36 ft 105 ft Modular designed equipment for operation as crane, with dragline or clamshell. For dragline operation, a rotating fairlead is fitted into the boom foot. This minimizes the rope angle to drum, which results in lower rope wear. 1. The lifting capacities stated are valid for lifting operation only (corres ponds with crane classification according to F.E.M , crane group A1) 2. Crane standing on firm, horizontal ground. 3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.) must be deducted from the gross lifting capacity to obtain a net lifting value. 4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity. 5. For max. wind speed please refer to lift chart in operator s cab or manual. 6. Working radii are measured from centre of swing and under load. 7. The lifting capacities are valid for 360 degrees of swing. 8. Calculation of stability under load is based on DIN / part 2 / chart 1 and ISO 4305 Table 1 + 2, tipping angle The structures are calculated according to F.E.M (EN / 2004). 10. ANSI B HS 855 HD

3 (No xx) with HD undercarriage, boom foot (No xx), A frame, 2x 55,200 lbs winches including wire ropes (295 ft), without basic counterweight Width 11 6 Weight in lbs 129,400 with boom foot (No xx), A frame, 2x 55,200 lbs winches including wire ropes (295 ft), without basic counterweight and crawlers Width 11 6 Weight in lbs 86,900 Triple grouser track shoes 31.5 Width 36 Weight in lbs 21,300 (No xx) Width 55 Weight in lbs* 1,100 (No xx) Width 55 Weightin lbs* 1,800 (No xx) Width 55 Weight in lbs* 2,800 (No xx) Width 55 Weight in lbs* 4,350 * ) Including pendant ropes Length Weight in lbs* 11,110 HS 855 HD 3

4 (No xx) (No ) Width 45 Weight in lbs* 980 (No ) Width 38 Weight in lbs* 245 (No ) Width 38 Weight in lbs* 430 * ) Including pendant straps (No ) Width 59 Weight in lbs* 2,050 Width 33.5 Weight in lbs 3,300 Width 41.3 Weight in lbs 38,150 Width 5 5 Weight in lbs 16,500 Width 12 Weight in lbs 1,650 Width 12 Weight in lbs 1,135 Width 16 Weight in lbs 880 Width 14 Weight in lbs HS 855 HD

5 Power rating according to ISO 9249, 450 kw (603 hp) at 1900 rpm Engine type Liebherr D 9508 A7 Fuel tank 211 gal capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA / CARB Tier 3 and 97/68 EC Stage III The main pumps are operated by a distributor gearbox. Axial piston displacement pumps work in closed and open circuits supplying oil only when needed (flow control on demand). To minimize peak pressure an automatically working pressure cut off is integrated. This spares pumps and saves energy. The hydraulic oil is cleaned through electronically controlled pressure and return filters. Possible contamination is signalled in the cabin. The use of synthetic environmentally friendly oils is possible. Ready made hydraulic retrofit kits are available to customize requirements e. g. powering casing oscillators, VM vibrators, hydraulic grabs, hanging leads etc. Working pressure max psi Oil tank capacity 216 gal Winch options: Line pull (nom. load) 35,300 lbs 44,100 lbs 55,200 lbs Rope diameter 26 mm 30 mm 34 mm Drum diameter 22,8 24,8 29,5 Rope speed ft/min Rope capacity 1st layer 170 ft 152 ft 158 ft The winches are outstanding in their compact design and easy assembly. Clutch and braking functions on the free fall system are provided by a compact designed, low wear and maintenance free multi disc brake. The drag and hoist winches use pressure controlled, variable flow hydraulic motors. This system features sensors that automatically adjust oil flow to provide max. winch speed depending on load. Option: Auxiliary winch 15,500 lbs in boom foot Tagline winch 6,600 lbs with free fall The track width of the undercarriage is changed hydraulically. Propulsion through axial piston motor, hydraulically released spring loaded multi disc brake, maintenance free crawler tracks, hydraulic chain tensioning device. Flat or triple grouser track shoes 31.5 inch Drive speed mph Option: 2 speed hydraulic motor for higher travel speed Self assembly system, jack up system Line pull Rope diameter Boom up max. 23,200 lbs 20 mm 44 sec. from 15 to 86 Consists of rollerbearing with external teeth for lower tooth flank pressure, fixed axial piston hydraulic motor, spring loaded and hydraulically released multi disc holding brake, planetary gearbox and pinion. Swing speed from rpm continuously variable, selector for 3 speed ranges to increase swing precision. Option: Second swing drive Noise emissions correspond with 2000/14/EC directive on noise emission by equipment used outdoors. The control system developed and manufactured by Liebherr is designed to withstand extreme temperature changes and the rough heavy duty tasks common in the construction industry. Complete machine operating data are shown on a high resolution display. The crane is equipped with proportional control for all movements, which can be carried out simultaneously. Dragline operation: A special Interlock control system is an option available. It is designed for power lifting of the dragline bucket without using the drag winch brake. An additional option is the Redundant Control System, which allows restricted operation of the machine in the event of a failure on the electronic base control or its sensors. On request, Liebherr also offers special custom designed control systems for free fall winches. Operation: Left joy stick for boom winch and swing, right two directional levers for winch I and II. Crawler control is actuated with the two central foot pedals. Additionally, hand levers can be attached to the pedals. Options: Special demolition control system MDE: Machine data recording PDE: Process data recording GSM modem HS 855 HD 5

6 C = Radius / dumping radius J = Height of boom head sheave centre above ground level Capacities in 1000 lbs for boom lengths (46 ft 95 ft) counterweight 58,000 lbs 46 ft 56 ft 66 ft 75 ft 85 ft 95 ft C J C J C J C J C J C J α ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,6 11,2 Max. capacities in 1000 lbs do not exceed 75% of tipping load. 6 HS 855 HD

7 C = Radius / dumping radius J = Height of boom head sheave centre above ground level K = Length of clamshell (depending on type and capacity of bucket) Capacities in 1000 lbs for boom lengths (46 ft 95 ft) counterweight 58,000 lbs 46 ft 56 ft 66 ft 75 ft 85 ft 95 ft C J C J C J C J C J C J α ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,0 Max. capacities in 1000 lbs do not exceed 66.7 % of tipping load. Load diagram restricted by safety factors of standard ropes: Winches 44,100 lbs 55,2001 lbs Rope diameter 30 mm 34 mm Min. breaking load 182,095 lbf 231,800 lbf 1 rope clamshell 36,400 lbs 46,300 lbs 2 rope clamshell 48,500 lbs 61,750 lbs HS 855 HD 7

8 ÏÏ ÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏ Ï Winch options 2x 44,100 lbs 2x 55,200 lbs Line speed 1st layer (ft/min) Drilling diameter Maximum allowable weight in two rope operation 48,500 lbs 61,750 lbs ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ Winch options 2x 44,100 lbs 2x 55,200 lbs Line speed 1st layer (ft/min) Max. chisel weight 26,500 lbs 35,300 lbs Maximum allowable weight in two rope operation 48,500 lbs 61,750 lbs 8 HS 855 HD

9 Capacities in 1000 lbs for boom lengths (66 ft 105 ft) Boom length Radius in (ft) 66 ft 75 ft 85 ft 95 ft 105 ft lbs lbs lbs lbs lbs 27 55,2 55,2 44,1 44,1 41, ,1 41,9 41,9 39,7 37,5 Max. capacities in 1000 lbs do not exceed 75% of tipping load. All loads given are max. values and must not be exceeded. They are only permitted in 2 rope automatic operation and are valid for work on a surface with max. inclination of 1 %. Lifting heigths must not exceed 82 ft. HS 855 HD 9

10 (No xx) Auxiliary jib 55,200 lbs The maximum capacity of the auxiliary jib is 55,200 lbs. The corresponding load chart is programmed in the LMI system. (table 1 No xx) Configuration for boom lengths (36 ft 223 ft) Length Amount of boom extensions Boom foot 18 ft Boom insert 10 ft** Boom insert 20 ft** Boom insert 40 ft** Boom head 18 ft Boom length (ft) * 223* * Additional counterweight allows self erection of boom up to 223 ft. **Actual lengths of boom sections are metric (e.g. 3 m, 6 m, 12 m). The figures shown above are approximate conversions to feet. 10 HS 855 HD

11 (No xx) Capacities in 1000 lbs for boom lengths (36 ft 203 ft) with 55,200 lbs winches 58,000 lbs counterweight Boom length in (ft) Radius Radius (ft) lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs (ft) Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. HS 855 HD 11

12 (No xx) Capacities in 1000 lbs for boom lengths (36 ft 223 ft) with 55,200 lbs winches 71,200 lbs counterweight and 33,100 lbs carbody counterweight Boom length in (ft) Radius Radius (ft) lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs (ft) * * 230.0* Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. *) With heavy duty boom head 12 HS 855 HD

13 (No xx) see table 1 on page 10 Length Amount of fixed jib extensions Fixed jib foot 18 ft Fixed jib insert 10 ft* Fixed jib insert 20 ft* Fixed jib head 18 ft Fixed jib length (ft) *Actual lengths of boom sections are metric (e.g. 3 m, 6 m). The figures shown above are approximate conversions to feet. HS 855 HD 13

14 (No xx) Radius (ft) lbs lbs lbs Capacities in 1000 lbs with fixed jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 14 HS 855 HD

15 (No xx) Radius (ft) lbs lbs lbs Capacities in 1000 lbs with fixed jib (No xx), 71,200 lbs counterweight + 33,100 lbs carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. HS 855 HD 15

16 Self assembly system Unloading of basic machine (option) Unloading and assembly of crawlers Unloading and assembly of carbody counterweight Unloading and assembly of counterweight Liebherr-Werk Nenzing GmbH P.O. Box 10, A 6710 Nenzing/Austria Tel.: Fax: crawler.crane@liebherr.com Unloading and assembly of boom Assembly of boom and reeving of hoist ropes Unloading of basic machine (standard) HS 855 HD /2008 Subject to change without notice.