PRELIMINARY. 268 kw (Stage IIIa) 261 kw (Stage V) 250 kw (Electro) t. Mobile material handling machine. 21 m. Stage V

Transcription

1 8 kw (Stage IIIa) 1 kw (Stage V) 5 kw (Electro) -95 t obile material handling machine 1 m Stage V

2 Advanced. The E-Series What makes up the E-Series 19: rope-driven S833 with elevated operator cab 5 years of experience in designing and constructing hydraulic material handling machines Uncompromisingly high performance in all areas: Focus on material handling Technology that can be mastered: High-quality components without over-engineering Long service life and high value retention Save fuel - reduce operating costs Work quietly - protect operator and environment Top-level performance Durable mechanical systems - stressed parts optimized High speeds - high load capacities aximum usability axcab comfort cab work in comfort SENCON work program selection made easy aximum safety Safe entry and exit - non-slip steps State-of-the-art cameras - entire work area in view aintenance and service made easy SENNEBOGEN Control System - easy fault diagnosis Simple maintenance clear labeling Consultation and support in your area 3 production locations - subsidiaries 13 sales partners - more than 35 service stations Subject to change. Additional options available upon request.

3 Subject to change. Additional options available upon request. 3

4 The E-Series. At a glance. Four ways to save fuel Work Idle Stop 18 ECO min -1 1 min -1 8 min -1 min -1 s 5 s 8 s 5 min Up to % savings: Work in Ecoode with reduced engine speed Automatic idle reduces engine speed to % of the operating speed when not needed fuel consumption lowered, state-of-the-art exhaust after treatment 3 Quiet operation High-capacity cooling 3 Consistently quiet operation thanks to decoupled engine mounts Sound pressure level reduced by up to.5 db; sound power level according to /1/ EC up to db lower than required Constant, reliable performance thanks to large-dimensioned and robust fans and coolers ciency thanks to axial-piston pumps, motor control, and on-demand thermostatic control Fan reversal for cleaning in series

5 Powerful hydraulic system Strong pumps with power reserves and lines Extra-long change intervals of, operat- oil with extended service life when using SENNEBOGEN Hydro Clean* aximum safety No-slip work surfaces Hand rails* 1 cameras to the right and rear Platform with railing next to sliding cab door * Option 5

6 The premium cab. Equipment features Optimal indoor climate with automatic climate control, partly tinted windows Comfortable even temperature distribution via 9 air vents Panoramic view Air-suspension climate-control led comfort seat*, seat heater Safety & comfort thanks to the sliding door, large access opening Ergonomically arranged operating elements, SENCON 1 V, V, and USB charging sockets, cellphone holder, document folder Various options: electric cooler boxbehind the driver seat, slip covers, seat climate control Joysticks on resonant, seatmounted consoles Comfortable grip thanks to ergonomic design Shortcuts for direct and sensitive control Quicker access thanks to optimized design of buttons and switches * Option

7 aintenance and service made easy. Optimized for maintenance Fast and easy diagnostic analysis thanks to the clearly labeled electrical distributor Easy accessibility to all service points of the machine Automatic central lubrication for equipment and slewing gear raceway HydroClean* Optimal protection of hydraulic components thanks to 3 μm Cleaner hydraulic oil, longer oil service life Central measuring points Easily accessible, central measuring points Inspect the entire hydraulic system quickly Clear labeling All parts labeled with a unique part number Easy and reliable spare parts ordering * Option 7

8 PRELIINARY odular design - versatile solutions Attachments Equipment options (others available upon request) Orange-peel grapple Double-shell grapple agnetic plate Wood grab Cabs K17 Cab elevation 3. m K1 B17 B19 pp Uppercarriage. m E3/ axcab K19 Diesel-hydraulic drive.7 m Electrohydraulic drive E7 axcab Industry Options Engine line drum Transformer Undercarriage variants ax. ax. 3. m 3,m ax. ax. 1.5 m ax. 1ax.. m 1,5m obile E P5 8 ax.. m ax. 3,m 1,m Crawler* R73/ Crawler* R7/9 * Additional information on our crawler undercarriages can be found in the 85 R E-Series brochure. -point underframe* ST78/55 B

9 Advantages at a glance Various attachments available Comprehensive Lighting concept Ideal overview and safe working height thanks to stable cab elevation, Safe entry and exit thanks to railings, grip handles and no-slip steps High stability due to the broad outrigger area 9

10 Technical data, equipment ACHINE TYPE odel (type) 85 Design UPPERCARRIAGE Central lubrication Electrical system Cooling system Options ENGINE Power 1 kw at 18-1 (Stage V) 8 kw at 18-1 (Stage IIIa) odel Cooling Fuel tank DEF tank Electr. system Batteries Options Cummins QSG 1 - Stage V Cummins QS 11 - Stage IIIa Direct injection, turbo charged, charge air cooler, reduced emissions, Eco ode, idle automation, stop automation Water-cooled discharge, main element and safety element, contamination indicator 88 l 1 l V x 15 Ah, battery disconnect switch Engine block heater Electric fuel pump Torsion-resistant box design, precision crafted, steel bushings for boom mounting. clean, service-friendly design, longitudinal engine Automatic central lubrication system Central electrical distributor, battery disconnect switch 3-circuit cooling system with high cooling capacity, thermostatically regulated fan drive reduces energy consumption and noise pollution Slewing gear brake via foot pedal 3 uppercarriage railing for additional safety LED lighting package Fire extinguisher Sea climate resistant coating as corrosion protection Electric heater for hydraulic tank Low temperature packages Hydraulically-driven magnetic generator kw / 5 kw SENtrack DS telematics system Gearbox HYDRAULIC SYSTE Load-sensing/LUDV hydraulic system for work and travel functions Pump type Swashplate-type variable-displacement piston bution for simultaneous, independent control of work functions Pump control Operating pressure Filtration Hydraulic tank Flow rate max. Control system SLEWING DRIVE Parking brake Slewing ring Slewing speed the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control 35 bar interval ter system water separation, optional 7 l up to 77 l/min Up to 8 l/min for rotary drive in the closed circuit Proportional, additional precision hydraulic actuation of work movements, hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals Cooling Very large-dimensioned cooler unit with thermostatically controlled fan drive Safety All hydraulic systems are protected with large-dimensioned hydraulic valves and lines. Hydraulic accumulator for emergency lowering of the equipment in the case of engine failure. Central measurement connections for hydraulic testing. Burst pipe safety valve for the hub and stick cylinder. Options Bio-oil environmentally friendly Tool Control for the programming of up to piece compact planetary gear with slant axis hydraulic motor in a closed hydraulic system ensures powerful rotary drive. Spring-loaded multi-disk brake Very strong slewing ring sealed with pinion gear lubrication - min 1, continuous 1

11 Technical data, equipment Design Cylinders Options CAB Cab type Cab equipment Options FUNCTIONING E7 hydraulically elevating cab Sliding door inc. sliding window, excellent ergonomics, climate automation, seat heater, V connections, SENCON active seat climate control Auxiliary heating system with timer Bullet proof windshield Bullet proof skylight Safety side window and rear window Sun protection for skylight and windshield Protective roof grating FOPS protective roof grating Protective front grating Radio with speakers axcab Industry with continuous bullet proof windshield electric cooler box Decades of experience and the latest computer simulations guarantee the greatest degree of stability and life-span. Oversized bearing points with low-maintenance, sealed special bushings, precision-crafted. Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points Ball valves in the hydraulic lines for quick and easy grab switching Sea climate resistant coating Sea climate resistant coating of all cylinders, nickel-plated and chrome-plated Float position of the equipment Hoist limit / stick limitation adjustable for stop settings, e.g. in the hall Drive Parking brake Tires Speed Options Option ass Note All-wheel drive powered by variable-displacement hydraulic motors with direct-mounted, automatically actuated brake valve. Strong planetary axles, -circuit servo brake system with additional safety parking brake Spring-loaded multi-disk brake 8 x 1.-, solid rubber -1 km/h variable Tires: 8 x 1-5 Protection for travel drive Shunting coupler ELECTRIC DRIVE Power: 5 kw / Volt / 5 Hz Total connected load 1 kva, machine side fuse 5 A (alternatively 3 A with magnet system) for V - star-delta connection motor start Advantages: Lowest operating costs, lownoise and virtually vibration-free work, long service life of the hydraulic components OPERATING WEIGHT approx., kg Basic 85 machine with P5 undercarriage, K17 with grab Operating weight varies by model and equipment. UNDERCARRIAGE Design Strong P5 mobile undercarriage with point outrigger support steering axle as axle cylinder with burst pipe safety valves, individual outrigger control for stability on uneven ground Subject to change. 11

12 Load ratings K17 KIN achine shown reversed All ratings are in tons (t) and constitute tute 75% of the 9. static 9st tipping 8. pi load or 87 % of the hydraulic lifting power in accordance co c with ISO and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments ta such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance corda with harmonized EU standard d EN 7-5, hy- draulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning I device [m] P5 1 m 7.5 m axcab E7, hydraulic elevation and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. 1 Technical features and dimensions subject to change.

13 Load ratings 8..7 K19 KIN achine shown reversed I [m] P5 11 m 8. m axcab E7, hydraulic elevation and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. Technical features and dimensions subject to change. 13

14 Load ratings.9 K19 KIN achine shown reversed II [m] P5 11 m 8. m axcab E3/, can be elevated and moved forward hydraulically and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. 1 Technical features and dimensions subject to change.

15 Load ratings K1 KIN achine shown reversed I [m] P5 1.1 m 9.5 m axcab E7, hydraulic elevation and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. Technical features and dimensions subject to change. 15

16 Load ratings B17 KIN achine shown reversed I [m] P5 1.8 m 7.5 m axcab E3/, can be elevated and moved forward hydraulically and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. 1 Technical features and dimensions subject to change.

17 Load ratings.3 B19 KIN achine shown reversed I [m] P5 1 m 8. m axcab E3/, can be elevated and moved forward hydraulically and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. Technical features and dimensions subject to change. 17

18 Load ratings, B KIN achine shown reversed I [m] P5 1 m 9.5 m axcab E3/, can be elevated and moved forward hydraulically and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. 18 Technical features and dimensions subject to change.

19 Load ratings.8 B KIN achine shown reversed II [m] P5 1.5 m 1 m 9.5 m axcab E3/, can be elevated and moved forward hydraulically and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. Technical features and dimensions subject to change. 19

20 Load ratings K1 KIN achine shown reversed I [m] P5 1.5 m 1.1 m 9.5 m axcab E7, hydraulic elevation and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. Technical features and dimensions subject to change.

21 Load ratings 5 K1 KIN achine shown reversed II [m] P5 1.5 m 1.1 m 9.5 m axcab E3/, can be elevated and moved forward hydraulically and level ground and 3 slewing. The values in brackets [...] apply 3 freestanding. Attachments such as orange-peel grabs, magnets, etc. are included in the load capacity. In accordance with harmonized EU standard EN 7-5, hydraulic excavators used for hoisting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. Technical features and dimensions subject to change. 1

22 PRELIINARY Dimensions with P5 undercarriage and axcab E7 with hydraulic elevation feature with P5 undercarriage axcab E3/, can be elevated and moved forward hydraulically

23 PRELIINARY Dimensions Technical features and dimensions subject to change with P5 undercarriage, axcab E3/, can be elevated and moved forward hydraulically, Pylon 1.5 m 3

24 Transport dimensions L H Load boom Grab stick Transport length (L) Transport height (H) K m 7.5 m 15.1 m 3.9 m K m 8.5 m 15.8 m 3.9 m K1 1.1 m 9.5 m 1.7 m 3.9 m B m banana 7.5 m 15. m 3.9 m B19 1. m banana 8. m 1 m. m B 1. m banana 9.5 m 1 m. m Note: and optional equipment) of the machines supplied by SENNEBOGEN aschinenfabrik GmbH. achine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances. Technical features and dimensions subject to change.

25 Recommended grabs SG orange peel grab ( shells) Design/size Grab capacity Weight 1 ax. Shell load capacity HO G SG l kg kg t SG orange peel grab (5 shells) Design/size Grab capacity Weight 1 Shell shape ax. load capacity HO G SG l kg kg t SGZ double-shell grapple Design/size Grab capacity Weight 1 maximum payload SGZ l kg t agnetic plates Type series/model Power Deadweight Breakaway force load capacity in kg WOKO kw kg kn Slab (safety factor ) S-RLB S-RLB S-RLB *) Available upon request 1 ) Weight information does not include grab suspension, stick bolts or hose system ) Half-open shells: shell sheet steel width mm, 5 mm for 1,5 l capacity and higher Detailed information on grabs, as well as log grabs, quick-release systems, and other attachments can be found in the "Attachments" brochure Dimensions in [mm] 5

26 delivered by SENNEBOGEN aschinenfabrik GmbH. achine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances. All product designations used may be trademarks of SENNEBOGEN aschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners. expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. SENNEBOGEN aschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN aschinenfabrik GmbH, Straubing, Germany. SENNEBOGEN aschinenfabrik GmbH Sennebogenstrasse Straubing, Germany Tel /1 marketing@sennebogen.de Order no E