Wheel Test Machine. All specification can be customized as per user s request 00/2
|
|
- Martha Preston
- 5 years ago
- Views:
Transcription
1 00/
2 Car Wheel Dynamic Radial Fatigue Test Machine 1. Machine Type: RFT-. Machine application: For Passenger Car Wheel Dynamic Radial Fatigue Test 3. Technical parameters: Structure: vertical machine frame with tire cooling device Test Position: Drum Diameter Width Φ mm Drum Radial Run-out 0.0mm Wheel Diameter: 1 6 Wheel Width: 4 1 Test Speed: max.140km/h accuracy: ±1% Test Load: Max.30 kn accuracy: ±1%P.S. Loading Means: Hydraulic servo in closed-loop Motor Power: 45 kw DC (or AC Inverter) Dimension Approx. L6500mm W1750mm H3050mm Total Weight: Approx.1t 01/
3 PC/LT/TB Wheel Radial Fatigue Test Machine RFT-7 1. Machine Type: RFT-7. Application: Used for passenger car/light truck/truck & bus/wheel radial fatigue test 3. Technical paramters: Structure: vertical machine frame with tire cooling device Test Position: Drum Diameter Width Φ mm Drum Radial Run-out 0.0mm Wheel Diameter: Wheel Width: 4 1 Test Speed: max.140km/h Test Load: 1# Position Max.30 kn accuracy: ±1%P.S. # Position Max.100 kn accuracy: ±1%P.S. Loading Means: Hydraulic servo in closed-loop Motor Power: 99 kw DC (or AC Inverter) Dimension Approx. L700mm W000mm H3400mm Total Weight: Approx.15t 0/
4 Truck and Bus Wheel Radial Fatigue Test Machine RFT-5 1. Machine Type: RFT-5. Machine application: Used for Truck and Bus Wheel Radial Fatigue Test 4. Technical parameters: Structure vertical machine frame with tire cooling device Test Position Drum Diameter Width: Φ mm Drum Radial Run-out 0.0mm Wheel Diameter Wheel Width: < 13 Test Speed Max.140km/h Radial Load Max.100 kn, accuracy: ±1%P.S. Loading Means Hydraulic servo in closed-loop Motor Power: 110 kw AC Inverter (or DC) Dimension Approx. L7800mm W000mm H3400mm Total Weight Approx.18t 03/
5 Car Wheel Dynamic Cornering Fatigue Test Machine CFT- 1. Machine Type: CFT-. Machine application: Used for Passenger Car Wheel Dynamic Cornering Fatigue Test 3. Technical parameters: Structure Wheel rotary sytyle, loading direction invariable Wheel diameter 1 ~6 Wheel width 3.5 ~10 Bending moment 1~10kN.m, accuracy: ±.5%P.S. Rotation speed Max. 600 rpm Speed regulation mode DC stepless drive Load displacement range 0 ~ +30mm accuracy: ±%P.S. Loading means Precise ball-screw in closed-loop control Automatic alarm protection device Motor power 15 kw DC Dimensions Approx.L00 mm W50 mm H1700 mm Total weight Approx.3 t 04/
6 Car Wheel Dynamic Cornering Fatigue Test Machine 1. Machine Type: CFT-3. Machine application: Used For Passenger Car Wheel Dynamic Cornering Fatigue Test 3. Technical Parameters: Structure stationary wheel is subjected to a rotating bending moment. Wheel diameter 1 ~6 Wheel width 4 ~1 Test rotation speed rpm Speed regulation method: stepless variable frequency drive X-Y bending moment Max.1 10 kn m, accuracy: ±.5%P.S. Loading means Loading in closed-loop Measuring accuracy of loading point offset: ±% Automic alarm protection device Motor power 5.5 kw AC Dimensions Approx.L1400mm W1060mm H1300mm Total weight Approx.t 05/
7 Truck and Bus Wheel Dynamic Cornering Fatigue Test Machine CFT-4 1. Machine Type: CFT-4. Machine application: For Truck and Bus Wheel Dynamic Cornering Fatigue Test 3. Technical parameters: Structure Wheel rotates under the influence of a stationary bending moment. Wheel diameter 16 ~4.5, Wheel width 6 ~15 Bending moment Max. 50 kn.m, accuracy: ±3% P.S. Rotation speed Max.500 rpm Speed regulation mode stepping stepless drive Load displacement range 0~+30mm, run-out <0.5mm Loading means Precise ball-screw Automatic alarm protection device Motor power kw DC Dimensions Approx.L500mm W300mm H3000mm Total weight Approx.5t 06/
8 Truck and Bus Wheel Dynamic Cornering Fatigue Test Machine CFT-5 1. Machine Type: CFT-5. Machine application: Used for Truck and Bus Wheel Dynamic Cornering Fatigue Test Test 4. Technical parameters: Structure stationary wheel is subjected to a rotating bending moment. Wheel diameter 16 ~4.5 Wheel width 4 ~13 Rotation speed 500 ~ 1500rpm Speed regulation mode Loading variable frequency control in closed-loop Bending moment Max.50kN.m accuracy: ±3%P.S. Measuring accuracy of loading point offset: 0.5 mm Automatic alarm protection device Motor power 5.5 kw AC Dimensions Approx.L1700mm W1350mm H1600mm Total weight Approx.4t 07/
9 13 Car Wheel Lateral Impact Test Machine ITM- 1. Machine Type: ITM-. Machine application: For Passenger Car Wheel Lateral Impact Test 3. Technical parameters: Machine structure: Included angle between impact supprort base and plane 13 Wheel diameter: 1 ~ 6, Wheel width: 4 ~ 1 Striker mass adjust range: 350 kg ~100 kg, accuracy: ± % Striker: 350 kg Weight: 50 kg /PCE 16PCS Weight: 10 kg /PCE 4PCS Cylinder weight: 5 kg /PCE PCS Cylinder weight:.5 kg /PCE PCS Striker mass adjust method: Set up Rubber buffer pad: 4PCS (φ 51 7, hardness HS 50) Striker effective dropping distance range 300 mm Length of striker impact face 375 mm, width 15 mm Motor power: 1.5 kw AC Machine dimension: About L1600 mm W1500 mm H700 mm Machine weight About 4 t 08/
10 30 Car Wheel Lateral Impact Test Machine (with 90 Function) ITM-3 1. Machine Type: ITM-3. Machine application: Used for 30 /90 Passenger Car Wheel Lateral Impact Test 3. Technical parameters: Structure Included angle between impact supprort base and plane is 30. Enclosed with one additional 90 impact support base. Wheel diameter 1 ~6 Wheel width 4 ~1 Main striker mass 910 kg ±18 kg Accessory mass 100 kg ±4.5 kg Striker effective dropping height Max.500mm Spring quantity: 3PCS Resultant constant of elasticity 0.98~1.3kN/mm The striker face width 15 mm, length 380 mm Motor power 1.5 kw AC Dimensions Approx.L1600mm W1500mm H3100mm Total weight Approx.5 t 09/
11 13 Car Wheel Lateral Impact Test Machine (With 30 & 90 Function) ITM-4 1. Machine Type: ITM-4. Machine application: For Passenger 13 /30 /90 Car Wheel Lateral Impact Test 3. Technical parameters: Wheel diameter: 1 ~ 6 Wheel width: 4 ~ 1 Striker mass adjusting method: Set up Machine structure: Included angle between impact support base and plane is 13 Striker mass adjusting range 350 kg ~100 kg Striker effective dropping adjustable range 300 mm Striker face length 375 mm, with 15 mm Rubber pad: 4 PCS (φ 51 7, hardness HS 50 Machine structure: included angle between impact support base and plane is 30 Machine structure: included angle between impact support base and plane is 90 Striker mass: 910 kg ± 18 kg Weight mass: 100 kg ± 4.5 kg Striker effective dropping distance: Max. 500 mm Spring quantity: 3 PCS Resultant spring constant: 0.98 ~ 1.3 kn/mm Striker impact face length: 380 mm, width 15 mm Motor Power: 1.5 kw AC Machine dimension: About L1600 mm W1500 mm H3100 mm Machine total weight: About 5 t 10/
12 Radial Wheel Impact Test Stand ITM-6 1. Machine Type : ITM-6. Machine Application: Used for testing radial impact performance and simulating the crash behaviour of vehicle wheels. After striker impacting tire, bouncing back is locked, which ensures that wheel takes one impact only. Complete with impact velocity measuring device Produced as per EU standards, applicable for BMW, Benz, Audi, Porsche, Volkswagen etc. 3. Technical Parameters: Machine Structure Vertical Machine Tire diameter: Max. Φ 900mm Tire width Max. 350mm Wheel offset --30 mm ~ + 70 mm Basic weight of striker 150 kg Max.weight of striker 315 kg,with 15 kg,5g additional weights Striker size mm or mm Impact face angle of striker 150, round angle R Dropping height no less than 1400 mm Motor power 1.5 kw AC Machine dimension: about L360 mm W1400 mm H3850 mm Machine total weight: about 4.5 t Note: 11/
13 Car Wheel Lateral / Radial Run-out Measuring Machine (Production Line) ROT-1 1. Machine Type: ROT-1. Machine application: Used for measuring the raidial and lateral run-out of passenger car wheel, which is capable of doing first and multiple harmonic wave calculation function. 3. Technical parameters: Structure Horizontal machine frame, it consists of wheel lifting, wheel measuring, and qualified wheel classificaiton conveying belt etc. Wheel Diameter 13 ~ 18 Wheel Width 3.5 ~ 8 Disc offset 0mm ~ 80mm Measuring rhythm 4 ~ 5 PCS/min Wheel positioning means Center hole (expanding core shaft)+mounting face Detection means laser non-contact measurement, not affected by wheel color difference Motor Power 5.0 kw Dimension Approx. L500mm W300mm H600mm Total Weight Approx. 6t 1/
14 Car Wheel Radial/Lateral Run-out Measuring Machine ROT- 1. Machine Type : ROT-. Machine Application: Used for measuring the raidial and lateral run-out of passenger car wheel, which is capable of doing first and multiple harmonic wave calculation function. 3. Technical Parameters: Structure: Horizontal test stand, mechanical contact style Wheel diameter: 13 ~ 18 Wheel Width: 4 ~ 8 Wheel Disc Offset: 0 mm ~ + 60 mm Measuring Accuracy Resolution: 0.01 mm Run-out Repeatability Accuracy: 0.05 mm Wheel positioning method center hole (expanding core shaft) + mounting face Measuring Method: Super hard roller (GCr15 steel) contacting measurement Machine Dimension: about L1000 mm W700 mm H150 mm Machine Total Weight: about 1.0 t Note: 13/
15 Truck and Bus Car Wheel Radial Lateral Run-out Measuring Machine ROT-3 1. Machine Type : ROT-3. Machine Application: Used for measuring the raidial and lateral run-out of passenger car wheel, which is capable of doing first and multiple harmonic wave calculation function. 3. Technical Parameters: Machine Structure Horizontal test stand, mechanical contact style Wheel diameter: 16 ~ 4.5 Wheel width 6 ~ 13 Wheel Disc Offset: 0 mm ~ mm Measuring Accuracy Resolution: 0.01 mm Run-out Repeatability Accuracy: 0.05 mm Positioning Means Center hole (expanding core shaft +mounting face) Measuring Method: Super hard roller (GCr15 steel) contacting measuring Machine Dimension: about L1400 mm W700 mm H1400 mm Machine total weight: about 1.5 t Note: 14/
16 Wheel Nut Seat Strength Test Machine 1. Machine Type: WNST-1. Machine Application: Used for measuring the stiffness and rigidity of nut seat of wheel disc. 3. Technical Parameters: Machine Structure Vertical Machine Frame Wheel Diameter 1 ~ 6 Wheel Width 4 ~ 1 Wheel Offset 0 ~ 165 mm Applying Load Max. 66 kn Measuring Range Max. 5 mm Machine Dimension about L1500 mm W1100 mm H1750 mm Machine Total Weight: about.5 t Note: 15/
PC Tire Slip Camber Angle Test Machine
PC Tire Slip Camber Angle Test Machine 4. Technical Parameters : Machine Structure Horizontal machine frame Position Number 2 Full Load Power 200 kw Test Speed 20 400km/h Accuracy : 0 +2 km/h Speed Control
More informationSpecification: Tire Test Machine. 3M Diameter Drum OTR Tire Endurance Test Machine TJR-1-OTR(Y) 14/1
3M Diameter Drum OTR Tire Endurance Test Machine TJR--OTR(Y). Machine Type: TJR--OTR (Y) Used for OTR Tire Radial Endurance Test Machine Structure: Horizontal Machine Frame Position Number: Drum Diameter
More informationCornering & Traction Test Rig MTS Flat-Trac IV CT plus
Testing Facilities Cornering & Traction Test Rig MTS Flat-Trac IV CT plus s steady-state force and moment measurement dynamic force and moment measurement slip angel sweeps tests tractive tests sinusoidal
More informationUltra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
More informationPRODUCTS OVERVIEW. Linear Motion in its Simplest Form
Linear Motion in its Simplest Form Simplicity of Design - IntelLiDrives TM produce direct linear motion, eliminating stretching belts, slipping pulleys, hysteresis and wear of the leadscrews. Cost Effective
More informationSPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
More informationSURFACE VEHICLE RECOMMENDED PRACTICE
SURFACE VEHICLE RECOMMENDED PRACTICE J1095 Issued 1982-06 Revised 2003-03 REV. MAR2003 Superseding J1095 MAR1995 Spoke Wheels and Hub Fatigue Test Procedures 1. Scope This SAE Recommended Practice provides
More informationJaroslav Maly & team CAE departament. AV ENGINEERING, a.s.
Design & Simulation of one axle trailer loading by 6 or 7 passenger cars - Virtual Product Development Jaroslav Maly & team CAE departament www.aveng.com Pro/ENGINEER design optimization of axle trailer
More informationPositioning Systems. Torque Motor Rotary Tables Product Overview and Application Areas
62 M99TE5-15 5.1 Product Overview and Application Areas The extremely rigid connection between motor and load, and a servo-drive regulation ensures excellent acceleration capabilities and good uniformity
More informationAxial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
More informationServoRings TM - integrated rotary tables with high torque servo ring motor, high resolution ring encoder and high accuracy ring bearing
ServoRings TM - integrated rotary tables with high torque servo ring motor, high resolution ring encoder and high accuracy ring bearing Operating principle ServoRing TM rotary tables use segmented three
More informationDXG 100 CNC Chucker with Gantry Robot
DXG 100 CNC Chucker with Gantry Robot jyoti. co.in DXG 100 CNC Chucker with Gantry Robot OVERVIEW DXG 100 is developed by considering industry requirement of small disc - type precision components in huge
More informationFIBROTOR. Electromechanical Universal Rotary Tables
FIBROTOR Electromechanical Universal Rotary Tables FIBROTOR No one will deliver faster... They have it all An extremely long life time and shortest cycle time with an excellent precision and no need for
More informationStopping Accuracy of Brushless
Stopping Accuracy of Brushless Features of the High Rigidity Type DGII Series Hollow Rotary Actuator The DGII Series hollow rotary actuator was developed for positioning applications such as rotating a
More informationA dream? Dr. Jürgen Bredenbeck Tire Technology Expo, February 2012 Cologne
Rolling resistance measurement on the road: A dream? Dr. Jürgen Bredenbeck Tire Technology Expo, 14.-16. February 2012 Cologne Content Motivation Introduction of the used Measurement Equipment Introduction
More informationRSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication
More informationThe world s first diagnostic tyre changer ere d syste
WHEEL DIAGNOSIS pow er te m The world s first diagnostic tyre changer ed sys Uniformity is the first technology that allows match-mounting to be carried out directly on the tyre changer, transforming it
More informationELECTROMECHANICAL UNIVERSAL ROTARY TABLES FIBRO TOR
ELECTROMECHANICAL UNIVERSAL ROTARY TABLES FIBRO TOR NEW CONTROL CAM WITH INCREASED ENERGY EFFICIENCY FIBROTOR SHORTEST DELIVERY TIMES... They have it all An extremely long life time and shortest cycle
More informationELECTROMECHANICAL UNIVERSAL ROTARY TABLES FIBRO TOR
ELECTROMECHANICAL UNIVERSAL ROTARY TABLES FIBRO TOR NEW CONTROL CAM WITH INCREASED ENERGY EFFICIENCY SHORTEST DELIVERY TIMES... AND GREATEST RELIABILITY. They have it all formula. In the process, the service
More informationZwick. Materials testing. Product Information LTM 5/10 electro-dynamic testing machine
CTA: 113389 113384 testing machine Range of application The LTM is an electro-dynamic testing machine with a drive based on linear motor technology. 's new, patented drive concept enables the LTM to be
More informationADRT Series Rotary Stages
ADRT Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding wobble and runout Direct coupled, high-accuracy
More informationLinear Motion Technology Handbook. The Drive & Control Company
Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl
More informationENTWICKLUNG DIESELMOTOREN
ENTWICKLUNG DIESELMOTOREN BMW Steyr Diesel Engine Development Center MULTIBODY AND STRUCTURAL DYNAMIC SIMULATIONS IN THE DEVELOPMENT OF NEW BMW 3- AND 4-CYLINDER DIESEL ENGINES Dr. Stefan Reichl, Dr. Martin
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationBARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
More informationCourtesy of Steven Engineering, Inc - (800) PATENTED
PRECISION RING DRIVE SYSTEMS Based on Nexen s innovative Roller Pinion technology, Nexen Ring Drive Systems come complete with a precision grade, high capacity bearing and drive mechanism in a rigid housing.
More informationTorque measuring. Types and operating description 310
308 Torque measuring technology Torque measuring shafts Types and operating description 310 Type 16/10, 16/30, 16/50 312 Type 32/100, 32/300, 32/500 314 Type 42/1000 316 Type 70/3000, 70/5000 318 Type
More informationLow Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77
Low Profile Air Gripper Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Height is approximately / the size of an equivalent Series MHZ2. MHZ2-D 42 Bore
More informationALAR Series Direct Drive, Large-Aperture, Rotary Stage
ALAR Series Direct Drive, Large-Aperture, Rotary Stage 5 different aperture sizes: 100 mm, 150 mm, 200 mm, 250 mm, 325 mm Continuous or limited travel Axial load capacity up to 595 kg Rotary Stages ALAR
More informationExtruded Positioning Stage
Extruded Positioning Stage Single-axis stage Turnkey operation Modular aluminum construction with integral brushless linear motor, linear encoder, limit switches, cable carrier, linear bearings and bellows
More informationThe CSF-mini series now includes Ultra Flat models with High-Moment Stiffness
New Product News Vol. 22 Toll Free Speed Phone (877) SERVO98 Sensor Toll Reducer Free Fax (877) SERV99 Controller Motor Other System Elements Driver The CSF-mini series now includes Ultra Flat models with
More informationSCHMIDT ServoPress. Unmatched Precision and Flexibility
SCHMIDT ServoPress Unmatched Precision and Flexibility An economic and high quality assembly is the key to the success of your product. The aim is to join together precise assemblies from low-cost individual
More informationDriving Characteristics of Cylindrical Linear Synchronous Motor. Motor. 1. Introduction. 2. Configuration of Cylindrical Linear Synchronous 1 / 5
1 / 5 SANYO DENKI TECHNICAL REPORT No.8 November-1999 General Theses Driving Characteristics of Cylindrical Linear Synchronous Motor Kazuhiro Makiuchi Satoshi Sugita Kenichi Fujisawa Yoshitomo Murayama
More informationPendulum Impact Testing Machine
Pendulum Impact Testing Machine CHARPY CBD Series Features Touch screen operation console. Automatic detect instant raised angle of pendulum. Automatic detect friction force and air resistance and correct
More informationSteering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2
Steering Test Rigs The World of Steering Test Machines Steering column assemblies, are by their nature extremely safety critical, thus the ability to test them accurately and repeatedly is extremely important.
More informationRotoCutting INNO VAT IONS 13-14
RotoCutting INNO VAT IONS 13-14 RotoCutting ROTARY TABLES FOR MACHINE TOOLS FIBROMAX 30 % OPTIMISATION FIBROPLEX LX HIGHLY STANDARDISED FIBRODYN DA HIGHLY DYNAMIC»»» FIBRO GmbH Weidachstraße 41 43 74189
More informationTechnical Part. Technique Specification
HYDRAULIC CNC PUNCHING MACHINE (VT-300) Technical Part Technique Specification Description Unit VT-300 Punch Force KN 300 Max. Processing Size mm 1250*2500 (with one reposition) Processing Thickness mm
More informationNSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Self-aligning Type Model LM casing Spline nut End seal LM rail Grease nipple Side plate Clearance adjustment bolt 90 Side seal (Optional) Ball Retainer Cross section 30 Point of Selection A Point
More informationINTEGRATED HYDRO-MECHANICAL SIMULATION OF A CAM-ROCKER ARM-UNIT INJECTOR SYSTEM TO ADDRESS NOISE AND VIBRATION ISSUES
GT-Suite Users Conference Frankfurt, Germany, October 10 th 2005 INTEGRATED HYDRO-MECHANICAL SIMULATION OF A CAM-ROCKER ARM-UNIT INJECTOR SYSTEM TO ADDRESS NOISE AND VIBRATION ISSUES R. HAM, H. FESSLER
More informationExtruded Positioning Stage
Sold by Servo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ 07866 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com Extruded Positioning Stage The Extruded
More informationT-MAX SERIES Direct Drive Rotary Servo
T-MAX SERIES Direct Drive Rotary Servo T-MAX SERIES Direct Drive Rotary Servo Low Profile Direct-drive Rotary Stage Smooth Brushless Servo-drive Positioning Motion Integrated High Resolution Rotary Encoder
More informationBARON-MAX VB Series Vertical Machining Centers
BARON-MAX VB Series Vertical Machining Centers Heavy Duty Performance The Baron Max VB series offers versatility and value. Ideal for production and job shop applications, the rugged construction allow
More informationFor advanced drive technology DATAFLEX. Torque measuring shaft DATAFLEX
DATAFLEX Torque measuring shaft DATAFLEX 263 The principle: Torque measurement at low cost DATAFLEX measures torques without contact or radio frequency, is maintenance-free and has a high frequency of
More informationSPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More informationSSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories
More informationScrew Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
More informationBARON-MAX VL Range Vertical Machining Centers
BARON-MAX VL Range Vertical Machining Centers Linear Guide ways VL Range Higher Efficiency, Rigid Structure, Excellent and Stable Accuracy At a Very Affordable Pricing Cost Effective, High Performance
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationConfig file is loaded in controller; parameters are shown in tuning tab of SMAC control center
Measuring Forces Force and Current limits on LCC The configuration file contains settings that limit the current and determine how the current values are represented. The most important setting (which
More informationRoaDyn S635 System 2000
Force RoaDyn S635 System 2000 Wheel Force Sensor for Heavy PassCars and High Performance Sports Cars Wheel force sensor for measuring three forces and three moments on a rotating wheel; a major constituent
More informationSKF Disc Couplings. Selection
SK Disc Couplings The SK disc coupling is the ideal solution in medium to high applications that require torsional rigidity, offer some allowance for misalignment, and do not require lubrication. These
More informationInsulating Glass machines
Insulating Glass machines Vertical Insulating Glass Production Line LBZ2500PY Features and specialties: PLC control system with whole process, touch-sensitive screen and man-machine interface. Realize
More informationCenters. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine
BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining
More informationSheave head. Auxiliary winch. Leader
Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace
More informationHours / 100 Marks Seat No.
17412 16117 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
More informationAWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationThe newest Generation of our Stick-Slip Test Stand SSP-04. ZINS Ziegler-Instruments GmbH
The newest Generation of our Stick-Slip Test Stand SSP-04 ZINS Ziegler-Instruments GmbH SSP-04 Our newest Tribological Test Stand to examinate material combinations and especially to measure Stick-Slip
More informationTheory of Machines. CH-1: Fundamentals and type of Mechanisms
CH-1: Fundamentals and type of Mechanisms 1. Define kinematic link and kinematic chain. 2. Enlist the types of constrained motion. Draw a label sketch of any one. 3. Define (1) Mechanism (2) Inversion
More informationCSG Series Fully Enclosed, Sealed Housing
New Product News Vol.19 Sensor Controller Other System Elements Speed Reducer Driver Motor CSG Series Fully Enclosed, Sealed Housing Harmonic Drive CSG high torque speed reducer is now available with a
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationSteering Module Test Simulator SMTS
Steering Module Test Simulator Overview The Steering Module Test Simulator () from MB Dynamics is a non-hydraulic turnkey lab test system, offering accurate, reliable and repeatable in-laboratory simulations
More informationto move Electric Roller Screw Servo Actuators for Spot Welding
Engineered to move Electric Roller Screw Servo Actuators for Spot Welding INDUSTRIAL ROLLER SCREW SERVO ACTUATORS Strong, Consistent Force for Maximum Productivity and Weld Quality Diakont delivers the
More informationRH Series. Features. Structure. High resolution High resolution of maximum 400,000 pulses/revolution ( /pulse) combining a HarmonicDrive.
RH Series The RH series includes compact and high-torque DC servo actuators with a high rotational accuracy combining a speed reducer HarmonicDrive for precision control and a DC servo motor. A combination
More informationHighly Flexible Couplings ELPEX-B Series
Siemens AG 2015 Highly Flexible Couplings ELPEX-B Series /2 Overview /2 Benefits /2 Application /2 Design / Technical data /5 Type EBWN /5 Selection and ordering data /6 Type EBWT /6 Selection and ordering
More informationRSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide High Temperature Type Model Endplate SUS34 LM block THK EX5 End seal (High temperature rubber) LM rail THK EX5 Ball SUS44C Grease nipple SUS34 Point of Selection A Point of Design Options Model
More informationKato CR-200 Ri. 20 t All Terrain Crane. Tel: Fax:
Kato CR-200 Ri 20 t All Terrain Crane 1565 3165 2965 2245 1665 200 200 1575 350 10 1880 5 13. 350 3210 Min: 6500 Max: 28000 Stroke: 21500 1685 6940 3345 2115 3250 8710 Ramp break over : 23゚ When the suspension
More informationThe University of Melbourne Engineering Mechanics
The University of Melbourne 436-291 Engineering Mechanics Tutorial Twelve General Plane Motion, Work and Energy Part A (Introductory) 1. (Problem 6/78 from Meriam and Kraige - Dynamics) Above the earth
More informationSLEWING RING CHARACTERISTICS, APPLICATIONS
SLEWING RING CHARACTERISTICS, APPLICATIONS Slewing rings are large-sized bearings which are able to accommodate combined load, i.e. axial, radial loads and tilting moment. They are usually provided with
More informationHeavy-Duty Rod Ends - Male with integral spherical plain bearing
Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6
More informationALWAYS ON THE SAFE SIDE
ALWAYS ON THE SAFE SIDE ZF TEST SYSTEMS FOR TIRES ZF TEST SYSTEMS FOR TIRES TIRE CHARACTERISTICS: FROM LOW TO HIGH FORCES Tires and wheels are the most delicate and most severely stressed parts of a vehicle.
More information12.3 Full Roller Type, MSR Series
12.3 Full Roller Type, MSR Series A. Construction Carriage End Seal Grease Nipple End Cap Inner Seal Roller Bottom Seal 45 Rail 45 B. Characteristics The full roller type linear guideway, MSR series, equip
More informationHydraulic Drives: How to Combine Dynamics and Efficiency. Bert Brahmer,
Hydraulic Drives: How to Combine Dynamics and Efficiency Bert Brahmer, 2011-04-21 Contents 1. Introduction 2. Benefits of Hydraulics in Industrial Drives 3. Challenges for Hydraulics 4. HPPC: Highly Dynamic
More informationFront-mounted equipment. Fitting front-mounted equipment
Fitting front-mounted equipment Fitting front-mounted equipment This document describes a number of solutions for fitting front-mounted equipment. More information is available in the document Limitations
More informationVehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA)
Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA) G. S. Choi and H. K. Min Kia Motors Technical Center 3-61 INTRODUCTION The reason manufacturers invest their time
More informationVolkswagen DCC Adaptive Chassis Control - Design and Function DCC Adaptive Chassis Control. Basics of the damping system
Volkswagen DCC Adaptive Chassis Control - Design and Function DCC Adaptive Chassis Control The rule for suspension systems has always been that increasing sportiness compromises the ride. In this new system
More informationMathematical Modelling and Simulation Of Semi- Active Suspension System For An 8 8 Armoured Wheeled Vehicle With 11 DOF
Mathematical Modelling and Simulation Of Semi- Active Suspension System For An 8 8 Armoured Wheeled Vehicle With 11 DOF Sujithkumar M Sc C, V V Jagirdar Sc D and MW Trikande Sc G VRDE, Ahmednagar Maharashtra-414006,
More informationReplace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
More informationVehicle Safety Research in TGGS
Vehicle Safety Research in TGGS Core Knowledge of Automotive Safety and Assessment Engineer Program and Research in TGGS Vehicle fundamentals and manufacturing process Vehicle and part Assessment Crash
More informationAXR Series Two-Axis Rotary Assembly
AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to
More informationSCHMIDT-KUPPLUNG GmbH
Schmidt-Kupplung SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung About us About us In the early 1960s Richard Schmidt developed of propulsion systems for rockets in a zero-gravity environment. Among the possible
More informationSCHMIDT HydroPneumaticPress
SCHMIDT HydroPneumaticPress Control Versions with Force-Stroke-Monitoring Single-channel Control Integration of the press in an automatic installation Electrical Power Stroke Connection incl. force output
More informationHigh Speed Automation
Gantry Robot Systems and Linear Modules zla0 For high speed automation, both gantry and articulated arm robots are widely used throughout industry. Because of the many inherent advantages of the gantry
More information! CAUTION! Damages on the machine possible.
1 DATAFLEX is a maintenance free torque measurement shaft with integrated speed measurement. In connection with the RADEX -N steel disc coupling it is a torsionally stiff double cardanic coupling with
More informationTorque steer effects resulting from tyre aligning torque Effect of kinematics and elastokinematics
P refa c e Tyres of suspension and drive 1.1 General characteristics of wheel suspensions 1.2 Independent wheel suspensions- general 1.2.1 Requirements 1.2.2 Double wishbone suspensions 1.2.3 McPherson
More informationModel Library Power Transmission
Model Library Power Transmission The Power Transmission libraries in SimulationX support the efficient modeling and analysis of mechanical powertrains as well as the simulation-based design of controlled
More informationSix keys to achieving better precision in linear motion control applications
profile Drive & Control Six keys to achieving better precision in linear motion control applications Achieving precise linear motion Consider these factors when specifying linear motion systems: Equipped
More informationSPECIFICATION. CRANE Specification. CARRIER Specification
CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting
More informationSAC2200S SANY All Terrain Crane 220 Tons Lifting Capacity
SAC2200S SANY All Terrain Crane Max. Lifting Capacity: 220 t Max. Boom Length: 68 m Max. Lifting Height: 105.5 m www.sanyglobal.com 2 3 Technical Features Technical Features Basic performance Key structural
More informationENERGY RECOVERY SYSTEM FROM THE VEHICLE DAMPERS AND THE INFLUENCE OF THE TANK PRESSURE
The 3rd International Conference on Computational Mechanics and Virtual Engineering COMEC 2009 29 30 OCTOBER 2009, Brasov, Romania ENERGY RECOVERY SYSTEM FROM THE VEHICLE DAMPERS AND THE INFLUENCE OF THE
More informationSHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions
More informationIII B.Tech I Semester Supplementary Examinations, May/June
Set No. 1 III B.Tech I Semester Supplementary Examinations, May/June - 2015 1 a) Derive the expression for Gyroscopic Couple? b) A disc with radius of gyration of 60mm and a mass of 4kg is mounted centrally
More informationSingle direction thrust ball bearings Double direction thrust ball bearings
Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...
More informationAXR Series. Two-Axis Rotary Assembly. Multiple configurations support a range of load and accuracy requirements
AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to
More informationPOWER TRANSMISSION RIGID COUPLINGS MINI MINI
POWER TRANSMISSION RIGID COUPLINGS 2 RIGID COUPLINGS FEATURES The Mini coupling is a backlash-free, torsion proof, bending elastic and, above all, maintenance-free steel coupling made in one piece. It
More informationLM Guide Radial Type Model SR
LM Guide Radial Type Model Endplate LM block Grease nipple End seal LM rail 90 Ball Retainer plate Side seal (Optional) Cross section 30 Point of Selection A Point of Design Options Model No. Precautions
More informationSTC600S STC600S TRUCK CRANE 60 TONS LIFTING CAPACITY. Quality Changes the World
STC600S STC600S TRUCK CRANE 60 TONS LIFTING CAPACITY 2 COMPANY BRIFE INTRODUCTION SANY Automobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry, mainly engaged in the research
More informationL15 Dynamics & Vibration Laboratory
LABORATORY PLANNING GUIDE L15 Dynamics & Vibration Laboratory Content Covered subjects according to the curriculum... 2 Main concept... 3 Initial training provided for laboratory personnel... 3 Requirements
More information