ADRT Series Rotary Stages

Size: px
Start display at page:

Download "ADRT Series Rotary Stages"

Transcription

1 ADRT Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding wobble and runout Direct coupled, high-accuracy rotary encoder Large diameter clear aperture Aerotech s ADRT series direct-drive rotary stages provide superior angular positioning and velocity control. Applications range from indexing to high-speed laser machining to precision wafer inspection. Superior Mechanical Design Dual large-diameter bearings are used to maximize performance with respect to wobble, moment stiffness, and repeatability. The large diameter bearings permit large payloads without compromising performance. Brushless Direct Drive To maximize positioning performance, the ADRT series utilizes Aerotech s S-series brushless, slotless motor. This motor has all the advantages of a brushless direct-drive motor no brushes to wear, no gear trains to maintain, and high acceleration and high speeds. Since it is a slotless, ironless design, there is zero cogging, meaning that there is absolutely no torque ripple. With its low inherent inertia and optimized motor design, the ADRT is capable of speeds and accelerations that are significantly higher than other competing products. These stages have a lower height profile compared to competing products within given torque ranges. The low inertia and zero backlash make the ADRT the ideal solution for applications requiring frequent directional changes. Accurate Positioning Line counts range from 3600 to 5400 lines per revolution. When coupled with Aerotech s MXH series resolution multipliers, resolutions can be as fine as 0.12 arc sec. The motor and high-performance rotary encoder are directly coupled to a common shaft. The absence of gear trains and mechanical couplings means no position errors caused by hysteresis, windup, or backlash. Flexible Configurations Options include a high-precision bearing for improved accuracy, smoothness, and run-out performance. Slip rings and rotary unions are available to ease integration of custom tooling, and a holding brake is available to limit movement of the stage during large impulse loads or when power is removed from the motor. The ADRT is the only rotary table available with integrated T-slots. These slots can be used to mount the table horizontally or to attach custom application specific fixtures. Aerotech manufactures a wide range of servo amplifiers and advanced controllers to provide a complete integrated package. 1

2 ADRT Series SPECIFICATIONS ADRT Series Rotary Stages ADRT Series ADRT ADRT ADRT ADRT ADRT Bearing Option -P (Precision) / -S (Standard) Maximum Torque (Continuous) 0.48 N m 1.6 N m 2.85 N m 5.06 N m 9.29 N m Bus Voltage (1) Up to 340 VDC Accuracy (2,3) 5 arc sec (-P); 60 arc sec (-S) Repeatability (3) 3 arc sec Axial Error Motion 5 µm (-P); 10 µm (-S) Radial Error Motion (4) 5 µm (-P); 10 µm (-S) Tilt Error Motion 10 arc sec Height 85 mm 135 mm 115 mm 135 mm 180 mm Aperture 13 mm 50 mm Radial Load (5) 10 kg 25 kg Axial Load 15 kg 30 kg Rated Speed 1000 rpm (-S); 1500 rpm (-P) 600 rpm Inertia kg-m kg-m kg-m kg-m kg-m 2 Mass 2.3 kg 2.9 kg 5.3 kg 6.9 kg 10.2 kg Finish Table Stage Hardcoat Black Anodize Notes: 1. Bus voltage for ADRT-100 with -25D connector is limited to 160 V. 2. -P accuracy requires calibration and Aerotech controls. 3. Repeatability and accuracy are dependent on encoder resolution. To achieve the listed specifications, encoder resolution must be 0.36 arc sec or less 4. Specifications are for single-axis systems. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications. 5. Moment load based on 5 year continuous rotation at 250 rpm with maximum axial load applied. Larger moment loads possible for low speed and/or low duty cycle applications. Consult Aerotech for additional information. ADRT Series ADRT ADRT ADRT ADRT Bearing Option -P (Precision) / -S (Standard) Maximum Torque (Continuous) N m N m N m N m Bus Voltage (1) Up to 340 VDC Accuracy (2,3) 5 arc sec (-P); 60 arc sec (-S) Repeatability (3) 3 arc sec Axial Error Motion 5 µm (-P); 10 µm (-S) Radial Error Motion (4) 5 µm (-P); 10 µm (-S) Tilt Error Motion 10 arc sec Height 155 mm 160 mm Aperture 75 mm 100 mm Radial Load (5) 80 kg 110 kg Axial Load 140 kg 170 kg Rated Speed 600 rpm 375 rpm Inertia kg-m kg-m kg-m kg-m 2 Mass 13.4 kg 16.7 kg 25.4 kg 30.6 kg Finish Table Hardcoat Stage Black Anodize Notes: 1. Bus voltage for ADRT-100 with -25D connector is limited to 160 V. 2. -P accuracy requires calibration and Aerotech controls. 3. Repeatability and accuracy are dependent on encoder resolution. To achieve the listed specifications, encoder resolution must be 0.36 arc sec or less 4. Specifications are for single-axis systems. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications. 5. Moment load based on 5 year continuous rotation at 250 rpm with maximum axial load applied. Larger moment loads possible for low speed and/or low duty cycle applications. Consult Aerotech for additional information. ADRT Maximum Speeds for Encoder Option Encoder Option ADRT-100 ADRT-150 ADRT-200 ADRT-260 -AS/-X5/-X10/-X rpm (-P) 1000 rpm (-S) 600 rpm 600 rpm 375 rpm -X rpm 600 rpm 500 rpm 375 rpm 2

3 ADRT Series SPECIFICATIONS Axial and Radial Cantilevered Load Capability (ADRT ) Axial and Radial Cantilevered Load Capability (ADRT ) Axial and Radial Cantilevered Load Capability (ADRT ) Axial and Radial Cantilevered Load Capability (ADRT ) Axial and Radial Cantilevered Load Capability (ADRT ) 3

4 ADRT Series SPECIFICATIONS ADRT Series Rotary Stages Axial and Radial Cantilevered Load Capability (ADRT ) Axial and Radial Cantilevered Load Capability (ADRT ) Axial and Radial Cantilevered Load Capability (ADRT ) Axial and Radial Cantilevered Load Capability (ADRT ) 4

5 ADRT Series DIMENSIONS ADRT-100 5

6 ADRT Series Rotary Stages 6 ADRT Series DIMENSIONS ADRT-150

7 ADRT Series DIMENSIONS ADRT-150 Limits/Hardstops ADRT-150 LIMIT OPTION: AVAILABLE TRAVELS LIMITS HARDSTOPS CONFIGURATION ANGLE CONFIGURATION ANGLE -LI+-5 +/- 5 -HS+-10 +/- 10 -LI+-10 +/- 10 -HS+-15 +/- 15 -LI+-20 +/- 20 -HS+-25 +/- 25 -LI+-30 +/- 30 -HS+-35 +/- 35 -LI+-40 +/- 40 -HS+-45 +/- 45 -LI+-45 +/- 45 -HS+-50 +/- 50 -LI+-50 +/- 50 -HS+-55 +/- 55 -LI+-60 +/- 60 -HS+-65 +/- 65 -LI+-70 +/- 70 -HS+-75 +/- 75 -LI+-80 +/- 80 -HS+-85 +/- 85 -LI+-90 +/- 90 -HS+-95 +/- 95 -LI / HS / LI / HS / LI / HS / LI / HS /

8 ADRT Series Rotary Stages 8 ADRT Series DIMENSIONS ADRT-200

9 ADRT Series DIMENSIONS ADRT-200 Limits/Hardstops ADRT-200 LIMIT OPTION: AVAILABLE TRAVELS LIMITS HARDSTOPS CONFIGURATION ANGLE CONFIGURATION ANGLE -LI+-30 +/- 30 -HS+-35 +/- 35 -LI+-20 +/- 20 -HS+-25 +/- 25 -LI+-10 +/- 10 -HS+-15 +/- 15 -LI+-5 +/- 5 -HS+-10 +/- 10 -LI+-40 +/- 40 -HS+-45 +/- 45 -LI+-45 +/- 45 -HS+-50 +/- 50 -LI+-50 +/- 50 -HS+-55 +/- 55 -LI+-60 +/- 60 -HS+-65 +/- 65 -LI+-70 +/- 70 -HS+-75 +/- 75 -LI+-80 +/- 80 -HS+-85 +/- 85 -LI+-90 +/- 90 -HS+-95 +/- 95 -LI / HS / LI / HS / LI / HS / LI / HS / LI / HS / LI / HS / LI / HS /

10 ADRT Series DIMENSIONS ADRT-260 ADRT Series Rotary Stages 10

11 ADRT Series DIMENSIONS ADRT-260 Limits/Hardstops ADRT-260 LIMIT OPTION: AVAILABLE TRAVELS LIMITS HARDSTOPS CONFIGURATION ANGLE CONFIGURATION ANGLE -LI+-5 +/- 5 -HS+-10 +/- 10 -LI+-10 +/- 10 -HS+-15 +/- 15 -LI+-20 +/- 20 -HS+-25 +/- 25 -LI+-30 +/- 30 -HS+-35 +/- 35 -LI+-40 +/- 40 -HS+-45 +/- 45 -LI+-45 +/- 45 -HS+-50 +/- 50 -LI+-50 +/- 50 -HS+-55 +/- 55 -LI+-60 +/- 60 -HS+-65 +/- 65 -LI+-70 +/- 70 -HS+-75 +/- 75 -LI+-80 +/- 80 -HS+-85 +/- 85 -LI+-90 +/- 90 -HS+-95 +/- 95 -LI / HS / LI / HS / LI / HS / LI / HS / LI / HS / LI / HS / LI / HS /

12 ADRT Series ORDERING INFORMATION ADRT Series Rotary Stages Ordering Example ADRT S -50 mm -AS -NO LI±10 -PLOTS Series Width (mm) Height -85/ /-135/ / /-180 Bearing Type -S -P Shaft Configuration Position Transducer -50 mm -AS -XX Brake Options -NO -BK Limits -UNLIMITED -LI -HS -SRCE -HCW -NOP -24V Options -PLOTS -HPD -25D -RS -AP ADRT Series Rotary Stage ADRT Direct-drive rotary table with 13 mm clear aperture and 0.64 N-m continuous torque ADRT Direct-drive rotary table with 13 mm clear aperture and 1.6 N-m continuous torque ADRT Direct-drive rotary table with 50 mm clear aperture and 2.85 N-m continuous torque ADRT Direct-drive rotary table with 50 mm clear aperture and 5.06 N-m continuous torque ADRT Direct-drive rotary table with 50 mm clear aperture and 9.29 N-m continuous torque ADRT Direct-drive rotary table with 75 mm clear aperture and N-m continuous torque ADRT Direct-drive rotary table with 75 mm clear aperture and N-m continuous torque ADRT Direct-drive rotary table with 100 mm clear aperture and N-m continuous torque ADRT Direct-drive rotary table with 100 mm clear aperture and N-m continuous torque Stage Bearing Options -S Dual standard-grade bearings -P Dual precision-grade bearings Shaft Configuration* -50mm 50 mm clear aperture *Note: Required for ADRT-150-xxx only Position Transducer -AS Standard feedback device; 1 Vpp sine wave output; 3600 lines/rev on the ADRT-100/150; 5400 lines/rev on ADRT-200/260; final resolution multiplier dependent -X5 Square wave digital output; 18 arc sec resolution on ADRT-100/150; 12 arc sec resolution on ADRT-200/260 -X10 Square wave digital output; 9 arc sec resolution on ADRT-100/150; 6 arc sec resolution on ADRT-200/260 -X25 Square wave digital output; 3.6 arc sec resolution on ADRT-100/150; 2.4 arc sec resolution on ADRT-200/260 -X50 Square wave digital output; 1.8 arc sec resolution on ADRT-100/150; 1.2 arc sec resolution on ADRT-200/260 Note: Digital output encoder signals are synthesized with a 16 MHz clock. Care must be taken to ensure that the encoder sample rate on the controller is at least 16 MHz or higher. Slower clock rates are available on request. Brake Options* -NO No brake -BK Holding brake *Note: Not available on ADRT-100. Not available with limits. Limits* -UNLIMITED Continuous Rotation -LI±x Normally-closed limits at ±x degrees, where x=5/10/20/30/40/45/50/60/70/80/90/100/110/120/130 (/135/140/150 on ADRT-200 and ADRT-260) -HS±x Hardstop end of travel at ±x degrees, where x=10/15/25/35/45/50/55/65/75/85/95/105/115/125/135 (/140/145/155 on ADRT-200 and ADRT-260) -SRCE Current sourcing limits -HCW Home limit uses clockwise limit (counter clockwise default) -NOP Normally open limit (normally closed default) 12

13 ADRT Series ORDERING INFORMATION -24V 24 VDC rated limits *Note: Not available with brake. No limits or hardstops on ADRT-100. Options -PLOTS Stage accuracy and repeatability documentation; included with -P; optional with -S -HPD 4-pin D-style motor power connector with 25-pin D-style feedback connector. Stage-mounted connectors on ADRT-150-xxx, ADRT-200-xxx, and ADRT-260-xxx. Strain-relieved 300 mm pigtail cable connection on ADRT-100-xxx -25D 25-pin D-style motor power connector with 25-pin D-style feedback connector; 160 VDC bus voltage max; available on ADRT-100 only; strain-relieved 300 mm pigtail cable connection -RS Rear shaft seal on ADRT-100-xxx -AP Air-purge fitting (ADRT-100-xxx only) 13

ADR175/240 Series. Mechanical-Bearing Rotary Stage. Direct-drive brushless servomotor. Cog-free design for outstanding velocity stability

ADR175/240 Series. Mechanical-Bearing Rotary Stage. Direct-drive brushless servomotor. Cog-free design for outstanding velocity stability DR175/240 Series Mechanical-Bearing Rotary Stage Direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding error motions Direct coupled, high-accuracy rotary encoder

More information

ALAR Series Direct Drive, Large-Aperture, Rotary Stage

ALAR Series Direct Drive, Large-Aperture, Rotary Stage ALAR Series Direct Drive, Large-Aperture, Rotary Stage 5 different aperture sizes: 100 mm, 150 mm, 200 mm, 250 mm, 325 mm Continuous or limited travel Axial load capacity up to 595 kg Rotary Stages ALAR

More information

ARMS Series Rotary Motion Simulators

ARMS Series Rotary Motion Simulators ARMS Series Rotary Motion Simulators Designed for highly accurate motion generation Velocity stability of 0.0001% over 360 Position resolution to 0.02 arc sec Payloads to 230 kg Integrated slip rings and

More information

ADRS Series Mechanical-Bearing Rotary Stage

ADRS Series Mechanical-Bearing Rotary Stage ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary

More information

APR Series High-Precision Mechanical Bearing Rotary Stage

APR Series High-Precision Mechanical Bearing Rotary Stage APR Series High-Precision Mechanical Bearing Rotary Stage Accuracies to 1.5 arc second load capacity up to 2 kg Incremental or absolute encoders Large bearings provide high payload and moment load capacity

More information

ADRS Series Mechanical-Bearing Rotary Stage

ADRS Series Mechanical-Bearing Rotary Stage ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary

More information

ACS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic ER collet chuck or 3-jaw gripper. Clear aperture for product feed-through

ACS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic ER collet chuck or 3-jaw gripper. Clear aperture for product feed-through ACS Series Rotary Stages ACS Series Mechanical-Bearing Rotary Stage Integral pneumatic ER collet chuck or 3-jaw gripper Clear aperture for product feed-through Normally-closed or -open gripper options

More information

APR Series. Direct-Drive Rotary Stage. Accuracies to 1.5 arc second. Axial load capacity up to 250 kg. Incremental or absolute encoders

APR Series. Direct-Drive Rotary Stage. Accuracies to 1.5 arc second. Axial load capacity up to 250 kg. Incremental or absolute encoders APR Series Rotary Stages APR Series Direct-Drive Rotary Stage Accuracies to 1.5 arc second load capacity up to 2 kg Incremental or absolute encoders Large bearings provide high payload and moment load

More information

AGR Series Gear-Driven Rotary Stages

AGR Series Gear-Driven Rotary Stages AGR Series Gear-Driven Rotary Stages Enhanced speed and load capacity Large aperture addresses a wide range of applications Continuous 360 degrees rotary positioning Rotary Stages AGR Series Direct encoder

More information

AGR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Enhanced speed and load capacity

AGR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Enhanced speed and load capacity AGR Series Mechanical-Bearing, Worm-Driven Rotary Stage Enhanced speed and load capacity Innovative precision worm-gear assembly (patent pending) provides outstanding accuracy and repeatability over a

More information

T-MAX SERIES Direct Drive Rotary Servo

T-MAX SERIES Direct Drive Rotary Servo T-MAX SERIES Direct Drive Rotary Servo T-MAX SERIES Direct Drive Rotary Servo Low Profile Direct-drive Rotary Stage Smooth Brushless Servo-drive Positioning Motion Integrated High Resolution Rotary Encoder

More information

PRO165LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction

PRO165LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Ten models with travels from 100

More information

ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system

ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system ALS20000 Series Mechanical Bearing, Linear Motor Stage Protective metal waycover Integral cable management system Ideally suited for clean-room applications Compact, high-performance, linear motor stage

More information

PRO225LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction

PRO225LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Twelve models with travels from

More information

PRO280LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction

PRO280LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Eight models with travels from 300

More information

ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage

ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage Travel lengths up to 250 mm with anti-creep crossed-roller bearings Optional center-mounted linear encoder for direct position feedback

More information

ECO225LM Series. Mechanical Bearing, Linear-Motor Stage. High-performance in a cost-effective, economic package. Rugged mechanical design

ECO225LM Series. Mechanical Bearing, Linear-Motor Stage. High-performance in a cost-effective, economic package. Rugged mechanical design Linear Stages Mechanical Bearing, Linear-Motor Stage High-performance in a cost-effective, economic package Rugged mechanical design Direct-drive linear motor for precision motion Nine models with travels

More information

ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system

ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system ALS20000 Series Mechanical Bearing, Linear Motor Stage Protective metal waycover Integral cable management system Ideally suited for clean-room applications Compact, high-performance, linear motor stage

More information

PRO225SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package

PRO225SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package Linear Stages PRO2SL/SLE Series PRO2SL/SLE Series Mechanical Bearing, Ball-Screw Stage Improved second-generation design High-performance in a cost-effective package Rugged mechanical construction Optional

More information

PRO165SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package

PRO165SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package PRO165SL/SLE Series Mechanical Bearing, Ball-Screw Stage Improved second-generation design High-performance in a cost-effective package Rugged mechanical construction Optional linear encoder 18 models

More information

PIglide RM Rotation Stage with Air Bearings

PIglide RM Rotation Stage with Air Bearings PIglide RM Rotation Stage with Air Bearings Friction-Free, Ideal for Indexing, Positioning, Scanning, Measuring Technology A-62x Cleanroom compatible Motion platform diameter from 50 mm to 300 mm Load

More information

ATS150 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers

ATS150 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers Linear Stages Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Submicron accuracy Optional

More information

AXR Series. Two-Axis Rotary Assembly. Multiple configurations support a range of load and accuracy requirements

AXR Series. Two-Axis Rotary Assembly. Multiple configurations support a range of load and accuracy requirements AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to

More information

PRO115LM Series. Mechanical Bearing, Linear Motor Stage. Aerotech s smallest sealed linear motor stage. Rugged mechanical construction

PRO115LM Series. Mechanical Bearing, Linear Motor Stage. Aerotech s smallest sealed linear motor stage. Rugged mechanical construction Linear Stages Mechanical Bearing, Linear Motor Stage Aerotech s smallest sealed linear motor stage Rugged mechanical construction High-performance in a cost-effective package Direct-drive linear motor

More information

PRO225-HS (High Speed) Series

PRO225-HS (High Speed) Series Linear Stages PRO225-HS (High Speed) Series Mechanical Bearing, Ball-Screw Stage Twelve models with travels from mm to 1500 mm More than 6X speed capability of the regular PRO series up to 1400 mm/s -seal

More information

BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control

BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype motors with the advantage

More information

ANT130-L-ZS Series. Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages. Nanometer performance in a large travel format (35 mm to 160 mm )

ANT130-L-ZS Series. Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages. Nanometer performance in a large travel format (35 mm to 160 mm ) ANT130-L-ZS Series Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages Nanometer performance in a large travel format (35 mm to 160 mm ) Dual-counterbalance, low-profile design High-dynamic,

More information

AXR Series Two-Axis Rotary Assembly

AXR Series Two-Axis Rotary Assembly AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to

More information

ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers

ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series

More information

LaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform

LaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform LaserTurn 1 Laser Machining System Highly integrated linear/rotary motion platform Pneumatically-actuated collet closer supports 0.1 mm to 7.9 mm O.D. materials with frictionless rotary union Clear aperture

More information

ECO165SL Series. Mechanical Bearing, Ball Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design

ECO165SL Series. Mechanical Bearing, Ball Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design Linear Stages Mechanical Bearing, Ball Screw Stage High-performance in a cost-effective, economic package Rugged mechanical design Available with servomotor or stepping motor Nine models with travels from

More information

HexGen HEX HL Hexapod Six-DOF Positioning System

HexGen HEX HL Hexapod Six-DOF Positioning System HexGen HE500-350HL Hexapods and Robotics HexGen HE500-350HL Hexapod Six-DOF Positioning System Six degree-of-freedom positioning with linear travels to 110 mm and angular travels to 40 Precision design

More information

ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers

ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series

More information

BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control

BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control BMS Series Rotary Motors BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype

More information

ECO115SL Series. Mechanical Bearing, Ball-Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design

ECO115SL Series. Mechanical Bearing, Ball-Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design Linear Stages Mechanical Bearing, Ball-Screw Stage High-performance in a cost-effective, economic package Rugged mechanical design Available with servomotor or stepping motor Nine models with travels from

More information

L VC and L SC Cantilevered Load Capability (ATS115)

L VC and L SC Cantilevered Load Capability (ATS115) Linear Stages Mechanical Bearing, Ball-Screw Stage Travels up to 600 Speeds up to 300 /s Side seal design with hard-cover Low-cost; high performance Long-life linear motion guide bearing system The ATS115

More information

ABL1500 Series. Air Bearing, Linear Motor Stage. Designed for high-performance scanning and inspection. Active air preload on all air-bearing surfaces

ABL1500 Series. Air Bearing, Linear Motor Stage. Designed for high-performance scanning and inspection. Active air preload on all air-bearing surfaces ABL10 Series Air Bearing, Linear Motor Stage Designed for high-performance scanning and inspection Active air preload on all air-bearing surfaces Linear encoder feedback provides subnanometer resolution

More information

BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control

BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control BMS Series Rotary Motors BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype

More information

ABL1500WB Series. Air Bearing, Linear Motor Stage. Wide base for large offset loads. Powerful dual linear motor drive

ABL1500WB Series. Air Bearing, Linear Motor Stage. Wide base for large offset loads. Powerful dual linear motor drive Air Bearing, Linear Motor Stage Wide base for large offset loads Powerful dual linear motor drive Designed for high-performance scanning and inspection Active air preload on all air-bearing surfaces The

More information

ABL1000 Series. Air-Bearing, Direct-Drive Linear Stage. Designed for high-performance alignment and assembly. 0.5 nm closed-loop resolution

ABL1000 Series. Air-Bearing, Direct-Drive Linear Stage. Designed for high-performance alignment and assembly. 0.5 nm closed-loop resolution Linear Stages Air-Bearing, irect-rive Linear Stage esigned for high-performance alignment and assembly 0.5 nm closed-loop resolution Fully preloaded air-bearing Low-noise linear amplifiers Complete noncontact

More information

BM Series. DC Brushless Rotary Servomotors. Standard NEMA frame sizes. Neodymium iron boron rare-earth magnets maximize performance

BM Series. DC Brushless Rotary Servomotors. Standard NEMA frame sizes. Neodymium iron boron rare-earth magnets maximize performance BM Series Rotary Motors BM Series DC Brushless Rotary Servomotors Standard NEMA frame sizes Neodymium iron boron rare-earth magnets maximize performance Skewed stator with 8-pole design minimizes torque

More information

ATS1000 Series. Mechanical Bearing, Ball-Screw Stage. Precision-ground ball screw. Long-life linear motion guide bearing system

ATS1000 Series. Mechanical Bearing, Ball-Screw Stage. Precision-ground ball screw. Long-life linear motion guide bearing system ATS1000 Series Mechanical Bearing, Ball-Screw Stage Precision-ground ball screw Long-life linear motion guide bearing system Low-cost high performance stage Optional bellows waycovers Optional hard cover

More information

ABL1000 Series SPECIFICATIONS Linear Stages ABL1000 Series

ABL1000 Series SPECIFICATIONS Linear Stages ABL1000 Series Linear Stages Air Bearing, Linear Motor Stage Designed for high-performance alignment and assembly Linear encoder feedback provides 2 nm resolution 1 nm closed-loop resolution with the Automation 3200

More information

Ultra Series: Crossed Roller Ultra Precision Stages

Ultra Series: Crossed Roller Ultra Precision Stages Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball

More information

PIglide RT Rotary Air Bearing Module

PIglide RT Rotary Air Bearing Module PIglide RT Rotary Air Bearing Module Frictionless, Nonmotorized A-60x Motion platform diameter from 50 mm to 300 mm Load capacity to 425 kg Eccentricity / flatness

More information

ServoRings TM - integrated rotary tables with high torque servo ring motor, high resolution ring encoder and high accuracy ring bearing

ServoRings TM - integrated rotary tables with high torque servo ring motor, high resolution ring encoder and high accuracy ring bearing ServoRings TM - integrated rotary tables with high torque servo ring motor, high resolution ring encoder and high accuracy ring bearing Operating principle ServoRing TM rotary tables use segmented three

More information

Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator

Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator

More information

Rotary Series Rotary Series: Direct Drive Precision Stages

Rotary Series Rotary Series: Direct Drive Precision Stages Rotary Series Rotary Series: Direct Drive Precision Stages Parker Bayside s Direct Drive Rotary Stages feature a robust construction and high performance in a compact package, providing smooth, near-frictionless

More information

Rotary Stages. Precision in Motion

Rotary Stages. Precision in Motion Rotary Stages Precision in Motion Contents Aerotech Precision Rotary Stages...3 Air Bearing, Direct-Drive Rotary Stages WORLD HEADQUARTERS Aerotech, Inc. 101 Zeta Drive Pittsburgh, PA 15238 Ph: 412-963-7470

More information

SM Series. High-Performance Stepper Motors. Industry-standard NEMA frame stepper motors. Available encoder feedback and brake options

SM Series. High-Performance Stepper Motors. Industry-standard NEMA frame stepper motors. Available encoder feedback and brake options SM Series Rotary Motors SM Series High-Performance Stepper Motors Industry-standard NEMA frame stepper motors Available encoder feedback and brake options Models to run off of North American & Asian/European

More information

FiberGrate 2000 Series

FiberGrate 2000 Series FiberGrate 2000 Series Linear, Air Bearing Subsystem Fully preloaded air bearing Advanced Automation 3200 PCbased controller Lownoise linear amplifiers Complete noncontact design Includes granite base,

More information

ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers

ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers Linear Stages TS100 Series TS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Includes

More information

CCS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic collet chuck

CCS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic collet chuck CCS Series Rotary Stages CCS Series Mechanical-Bearing Rotary Stage Integral pneumatic collet chuck Captive collet design minimizes axial tube motion during clamp/unclamp cycles Clear aperture for product

More information

ART300 Series. Mechanical-Bearing Rotary Stage. Continuous 360º rotary positioning

ART300 Series. Mechanical-Bearing Rotary Stage. Continuous 360º rotary positioning ART300 Series Mechanical-Bearing Rotary Stage Continuous 360º rotary positioning Precision worm gear drive for outstanding accuracy and repeatability High speed and load capacity Includes brushless servomotor

More information

Mini-MAG Positioning Products

Mini-MAG Positioning Products Mini-MAG Positioning Products Miniature Linear Stage The Mini-MAG (MMX) line of miniature linear stages blends the ultimate in performance, reliability, and value, delivering nearly twice the accuracy

More information

NLS4 SERIES LINEAR STAGE

NLS4 SERIES LINEAR STAGE NLS4 SERIES LINEAR STAGE The NLS4 have been designed for a variety of applications in research and other industrial areas requiring precision positioning such as in semiconductor processing, fiber optics

More information

SGL Series. Single Guide Linear Motor Stage. Zero cogging and backlash ironless linear motor actuator. High speed and high acceleration

SGL Series. Single Guide Linear Motor Stage. Zero cogging and backlash ironless linear motor actuator. High speed and high acceleration SGL Series Single Guide Linear Motor Stage Direct drive Zero cogging and backlash ironless linear motor actuator High speed and high acceleration Fast response and quick settling time Smooth motion at

More information

ABL8000 Series. Air Bearing, Linear Motor Stage. Active air preload on all air-bearing surfaces. Travel to 1 meter

ABL8000 Series. Air Bearing, Linear Motor Stage. Active air preload on all air-bearing surfaces. Travel to 1 meter Linear Stages Air earing, Linear Motor Stage Active air preload on all airbearing surfaces Travel to 1 meter Linear encoder or laser interferometer feedback High stiffness for heavy loads and excellent

More information

Screw Driven automation tables

Screw Driven automation tables automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics

More information

Extruded Positioning Stage

Extruded Positioning Stage Extruded Positioning Stage Single-axis stage Turnkey operation Modular aluminum construction with integral brushless linear motor, linear encoder, limit switches, cable carrier, linear bearings and bellows

More information

Gearmotors & Gearheads. Servo Motors & Drives. Linear & Rotary Positioning Stages. Direct Drive Rotary Table Product Manual

Gearmotors & Gearheads. Servo Motors & Drives. Linear & Rotary Positioning Stages. Direct Drive Rotary Table Product Manual Servo Motors & Drives Gearmotors & Gearheads Linear & Rotary Positioning Stages Direct Drive Rotary Table Product Manual Direct Drive Rotary Table Product Manual Rev: 3.2 / 1103 P/N: 12197009 Please check

More information

PRODUCTS OVERVIEW. Linear Motion in its Simplest Form

PRODUCTS OVERVIEW. Linear Motion in its Simplest Form Linear Motion in its Simplest Form Simplicity of Design - IntelLiDrives TM produce direct linear motion, eliminating stretching belts, slipping pulleys, hysteresis and wear of the leadscrews. Cost Effective

More information

DS4-SERIES POSITIONING TABLES

DS4-SERIES POSITIONING TABLES www.danahermotion.com/ds4 DS4-SERIES POSITIONING TABLES Performance & Versatility in a compact design For single- & multiaxis requirements, DS4 is your modular solution. PERFORMANCE DURABILITY FLEXIBILITY

More information

BLM Series. Linear Motors. High output force in an 86.4 mm x 34.3 mm cross section

BLM Series. Linear Motors. High output force in an 86.4 mm x 34.3 mm cross section BLM Series Linear Motors High output force in an 86.4 mm x 34.3 mm cross section Continuous force to 397.6 N 89.4 lb); peak force to 1590.4 N 357.5 lb) High-energy rare-earth magnets used in magnet tracks

More information

Extruded Positioning Stage

Extruded Positioning Stage Sold by Servo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ 07866 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com Extruded Positioning Stage The Extruded

More information

Linear Servo Motor Driven

Linear Servo Motor Driven Linear Servo Motor Driven High Speed, High Precision Tables Positioning systems needed for many of today s high-technology applications must satisfy an ever-increasing demand for high throughput and the

More information

1291BL Series Technical Specification Single Axis Position and Rate Table System

1291BL Series Technical Specification Single Axis Position and Rate Table System Datasheet 1291BL Series Technical Specification Single Axis Position and Rate Table System DESCRIPTION The Model 1291BL Single Axis Position and Rate Table System is designed to provide precise position,

More information

Technical Specifications

Technical Specifications Technical Specifications Overview RollerDrive CNC The answer for a CNC rotary axis Pure Motion By Zero-Backlash Technology TM The RollerDrive CNC, a CNC rotary table, is designed to fulfill the demands

More information

WGL Series. Wide Guide Linear Motor Stage. Zero backlash ironless linear motor. Choice of linear encoder resolutions of up to 1um

WGL Series. Wide Guide Linear Motor Stage. Zero backlash ironless linear motor. Choice of linear encoder resolutions of up to 1um GL Series ide Guide Linear Motor Stage Direct drive Zero cogging Zero backlash ironless linear motor Choice of linear encoder resolutions of up to 1um Simple design with fewer parts Corrosion resistant

More information

LaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform

LaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform LaserTurn 1 Laser Machining System Highly integrated linear/rotary motion platform Pneumatically-actuated collet closer supports 0.1 mm to 7.9 mm O.D. materials with frictionless rotary union Clear aperture

More information

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED

More information

Positioning Systems. Torque Motor Rotary Tables Product Overview and Application Areas

Positioning Systems. Torque Motor Rotary Tables Product Overview and Application Areas 62 M99TE5-15 5.1 Product Overview and Application Areas The extremely rigid connection between motor and load, and a servo-drive regulation ensures excellent acceleration capabilities and good uniformity

More information

POSITIONING STAGES AND SYSTEMS

POSITIONING STAGES AND SYSTEMS POSITIONING STAGES AND SYSTEMS DEVELOPING HIGHLY ENGINEERED LINEAR POSITIONING SYSTEMS THAT IMPROVE PRECISION, INCREASE PRODUCTIVITY AND CREATE VALUE FOR CUSTOMERS Linear and Rotary Positioning Stages

More information

RH Series. Features. Structure. High resolution High resolution of maximum 400,000 pulses/revolution ( /pulse) combining a HarmonicDrive.

RH Series. Features. Structure. High resolution High resolution of maximum 400,000 pulses/revolution ( /pulse) combining a HarmonicDrive. RH Series The RH series includes compact and high-torque DC servo actuators with a high rotational accuracy combining a speed reducer HarmonicDrive for precision control and a DC servo motor. A combination

More information

300 & 400 Series Positioning Tables

300 & 400 Series Positioning Tables 300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series

More information

VT-80 Linear Stage. Related and Compatible Products. Basic Version for Universal Use

VT-80 Linear Stage. Related and Compatible Products. Basic Version for Universal Use VT-80 Linear Stage Basic Version for Universal Use Travel ranges from 25 to 300 mm (1 to 12") Low profile Max. velocity to 20 mm/s Load capacity to 5 kg Standard-class linear stage Recirculating ball bearings

More information

1291BL Series Technical Specification Single-Axis Rate and Positioning Table System

1291BL Series Technical Specification Single-Axis Rate and Positioning Table System Datasheet 1291BL Series Technical Specification Single-Axis Rate and Positioning Table System DESCRIPTION The Model 1291BL Single Axis Positioning and Rate Table System is designed to provide precise position,

More information

105000BT & BT/CT Series

105000BT & BT/CT Series 15BT & 16BT/CT Series Ball Bearing and Cross Roller Bearing Tables Designed for high accuracy and extremely smooth motion, 1 series tables are ideal for light to moderate duty cycle applications such as

More information

NGAO OSM. Design Study. Alex Delacroix 08/05/2009 Version 9

NGAO OSM. Design Study. Alex Delacroix 08/05/2009 Version 9 NGAO OSM Design Study Alex Delacroix 08/05/2009 Version 9 1 1. Conceptual design and operation The Ø 5 (3.635 mm) probe covers the entire Ø 120 (87.24 mm) Field of View. The 2 degrees of freedom probe

More information

CCS Series Mechanical-Bearing Direct-Drive Rotary Collet Stage

CCS Series Mechanical-Bearing Direct-Drive Rotary Collet Stage CCS Series Mechanical-Bearing Direct-Drive Rotary Collet Stage Integral pneumatic collet chuck Captive collet design minimizes axial tube motion during clamp/unclamp cycles Clear aperture for product feed-through

More information

MAKES LIGHT WORK OF HEAVY LOADS

MAKES LIGHT WORK OF HEAVY LOADS CR/TH FREELY PROGRAMMABLE ROTARY TABLES CR/TH HEAVY DUTY ROTARY TABLE CR/TH HEAVY DUTY ROTARY TABLE: MAKES LIGHT WORK OF HEAVY LOADS FOR HORIZONTAL AXES User-programmable rotary barrel drive of the TH

More information

Model No. Travel Runout Return Force Weight (extension-compression)

Model No. Travel Runout Return Force Weight (extension-compression) Specifications: motioncontrol catalog manualstages MM-1 Standard Manual MicroMini TM Stages Constructible into over 16 different configurations (request 3 D Basic Construction Diagrams) Wobble (max): 10

More information

Rotary Tables. Z Theta system

Rotary Tables. Z Theta system Rotary Tables High force Air bearings Roller bearings XY tables Z Theta system Cartesian systems Linear stepping motors and systems Linear brushless motors and systems Linear measurement systems Semiconductor/Electronics

More information

BLM Series. Linear Motors. High output force in an 86.4 mm x 34.3 mm cross section

BLM Series. Linear Motors. High output force in an 86.4 mm x 34.3 mm cross section BLM Series Linear Motors BLM Series Linear Motors High output force in an 86.4 mm x 34.3 mm cross section Continuous force to 397.6 N (89.4 lb; peak force to 1590.4 N (357.5 lb High-energy rare-earth magnets

More information

with SERVOSTAR CD & 600 drives Systems Technical Publication

with SERVOSTAR CD & 600 drives Systems Technical Publication with SERVOSTAR CD & 6 drives s Technical Publication The DDR (Direct Drive Rotary) Story Kollmorgen GOLDLINE DDR What is direct drive? Very simply it is the direct coupling of the torque motor (such as

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

The Advantages of Linear Direct Drives

The Advantages of Linear Direct Drives Linear Direct Drives High throughput, high precision, and maintenance-free: Linear direct drives from Kollmorgen set the standard for performance and effectiveness. These are brushless 3-phase servo motors

More information

HARMONIC GEARHEAD. Features & Benefits Specifications... 53

HARMONIC GEARHEAD. Features & Benefits Specifications... 53 HARMOIC GEARHEAD exen s revolutionary (HG) is the perfect combination of size and precision. Use the integrated with exen s RPS Pinion (HGP) to create a true backlash-free solution from the motor to the

More information

EJP SERIES Right-angle Worm

EJP SERIES Right-angle Worm EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals

More information

ADR-A 系列 ADR -A Series 直接驱动 Direct 旋转电 Drive Rotar y Motor

ADR-A 系列 ADR -A Series 直接驱动 Direct 旋转电 Drive Rotar y Motor ADR-A Series ADR-A 系列 Direct Drive Rotary Motor 直接驱动旋转电动机 Direct drive, brushless motor fully integrated with encoder and bearing Low cogging torque Low speed and high speed windings Precise homing through

More information

Mini-MAG (MMG) Positioning Products Ultra Compact Linear Motor Stages

Mini-MAG (MMG) Positioning Products Ultra Compact Linear Motor Stages Mini-MAG (MMG) Positioning Products Ultra Compact Linear Motor Stages The Mini-MAG (MMG) line of positioning stages blends the ultimate in performance, reliability, and value, delivering nearly twice the

More information

ST AND SW TORQUE ROTARY UNITS

ST AND SW TORQUE ROTARY UNITS ST/SW ROTATING UNITS ST/SW TORQUE ROTARY UNIT ST AND SW TORQUE ROTARY UNITS CABLE CONNECTION Compact connector for any orientation of cable connection WEISS APPLICATION SOFTWARE Fast, easy and secure setting

More information

Product Information PI Disk-type tool turret

Product Information PI Disk-type tool turret Product Information PI 21.3 Disk-type tool turret without tool drive Series with tool drive Series 0.5.460.4xx 0.5.456.4xx (axial) 0.5.450.4xx (radial) 2017-05-31 PI 21.3 3 Contens Table of Contens Turret

More information

The STH is a mid-range speed and torque gear reducer that

The STH is a mid-range speed and torque gear reducer that -SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between

More information

BLMUC Series Linear Motors

BLMUC Series Linear Motors BLMUC Series Linear Motors Ultra-compact size for tight space constraints; 52.0 mm x 20.8 mm cross section Continuous force to 58.0 N (13.0 lb); peak force to 231.8 N (52.1 lb) Non-magnetic forcer coil

More information

RV High-Performance Precision Rotation Stages

RV High-Performance Precision Rotation Stages RV High-Performance Precision Rotation Stages The RV Series rotation stages provide high-precision angular positioning accuracy combined with high load capacity. There are five stage sizes and seven drive

More information

ROTARY INDEX TABLES RT Series

ROTARY INDEX TABLES RT Series ROTARY INDEX TABLES RT Series RT100 For mounted accessories up to Ø 800mm. For rapid assembly of small parts, inspection or feeding parts. 14 Fixed Index Drives The rotary index table transforms a constant

More information

SERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS

SERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 2.048 pulses per turn Shaft fixing through front or rear clamp External diameter 58 mm Hollow shaft Ø 10, 12 or 14 mm Protection

More information

Courtesy of Steven Engineering, Inc - (800) PATENTED

Courtesy of Steven Engineering, Inc - (800) PATENTED PRECISION RING DRIVE SYSTEMS Based on Nexen s innovative Roller Pinion technology, Nexen Ring Drive Systems come complete with a precision grade, high capacity bearing and drive mechanism in a rigid housing.

More information

DAMPING OF VIBRATION IN BELT-DRIVEN MOTION SYSTEMS USING A LAYER OF LOW-DENSITY FOAM

DAMPING OF VIBRATION IN BELT-DRIVEN MOTION SYSTEMS USING A LAYER OF LOW-DENSITY FOAM DAMPING OF VIBRATION IN BELT-DRIVEN MOTION SYSTEMS USING A LAYER OF LOW-DENSITY FOAM Kripa K. Varanasi and Samir A. Nayfeh Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge,

More information