WHEEL ALIGNMENT MACHINE ACCESSORIES

Size: px

Start display at page:

Download "WHEEL ALIGNMENT MACHINE ACCESSORIES"

Berniece Potter
5 years ago
Views:

1 WHEEL ALIGNMENT MACHINE ACCESSORIES Sarveshwari Engineers 355 Deepali, Pitampura, Delhi Tel.: , , Fax: Website : / info@sarveshwari.com

1 551024 2 5521024 3 550184 4 550244 5 5531024 6 5541024 1 2 3 4 5 6 7 PUSH TYPE Fingers (Claws) Code No.

Weight : 3.500kg Use : For holding sensors during wheel alignment process. THREADED Fingers (Claws) Code No.

20mm. Weight : 3.500kg PUSH TYPE Fingers (Claws) Code No.

000kg PUSH TYPE Fingers (Claws) Code No.

500kg Clamp for Measuring Head of 3D Wheel Alignment M/c Four Point with PUSH Type Fingers (Claws) Code : 5531024 Size :

500kg Wheel Alignment Clamp (5 PIN) Code : 5541024 Bore Size : 15mm Weight: 4.

Finger Tool (Claws)for Wheel Clamps Length Dia Weight Code No.

2 PUSH TYPE Fingers (Claws) Code No. : Size : For Rim Size 12" to 24" (Passenger Car/Truck / Buses) Bore Size: Available in bore sizes 15mm, 16mm, 20mm. Weight : 3.500kg Use : For holding sensors during wheel alignment process. THREADED Fingers (Claws) Code No. : Size : For Rim Size 12" to 24" (Passenger Car/ Truck / Buses) Bore Size : Available in bore sizes 15mm, 16mm, 20mm. Weight : 3.500kg PUSH TYPE Fingers (Claws) Code No. : Size : For Rim Size 9" to 20" (Passenger Car) Bore Size: Available in bore sizes 15mm,16mm. Weight : 3.000kg PUSH TYPE Fingers (Claws) Code No. : Size : For Rim Size 9" to 26" (Truck / Buses) Bore Size: Available in bore sizes 15mm, 16mm. Weight : 3.500kg Clamp for Measuring Head of 3D Wheel Alignment M/c Four Point with PUSH Type Fingers (Claws) Code : Size : For Rim Size 12" to 24" (Passenger Car/Truck / Buses) Weight: 4.500kg Wheel Alignment Clamp (5 PIN) Code : Bore Size : 15mm Weight: 4.400kg Use : Used especially for alignment of Mercedes/ BMW/ Audi. Material : Aluminum Casting with Red Powder Coating. Finger Tool (Claws)for Wheel Clamps Length Dia Weight Code No. 48mm 12mm 30gms mm 12mm 70gms mm 14mm 30gms mm 12mm 45gms mm 10mm 36gms mm 15mm 35gms mm 15mm 70gms mm 12mm 42gms mm 14mm 62gms mm 14mm 71gms Use : Set of 4 Fingers (Claws) suitable for Steel & Alloy rims. Finger fits on to make Finger Material : Made from Stainless Steel & Carbon Steel

8 1100017 9 1100117 10 1100817 8 Mechanical Turn Table Code No.

9.00 kg Use : Used for easy turning of tyre left / right during alignment of the

Black Powder Coated to prevent rusting. Steel balls(ø15mm) used in plastic cage.

: 1100117 Size : L-380mm, W-350mm, H-45mm o o Capacity : 1000kg each having scale of +_

240kg Use : Used for easy turning of tyre left / right during alignment of the Steel

:1100817 Size : L-370mm, W-370mm, H-50mm o o Capacity : 1500kg each having scale of +_

Steel balls(ø12mm) used in plastic cage.

:1101017 Size : L-370mm, W- 670mm, H-53mm Capacity : 1500kg each Dia : 350mm Weight: 18.

:1101317 Size : L-395mm, W-395mm, H-50mm Capacity : 1500kg each Dia : 350mm Weight: 6.

3 Mechanical Turn Table Code No. : Size : L -320mm, W- 400mm, H-50mm Capacity : 1000kg each Dia : 275mm Weight: 9.00 kg Use : Used for easy turning of tyre left / right during alignment of the Passenger Car. Material : Made from heavy duty steel sheet. Black Powder Coated to prevent rusting. Steel balls(ø15mm) used in plastic cage. 9 Mechanical Turn Table with Scale Code No. : Size : L-380mm, W-350mm, H-45mm o o Capacity : 1000kg each having scale of +_ 0-60 Dia : 310mm Weight: 9.240kg Use : Used for easy turning of tyre left / right during alignment of the Passenger Car. Material : Made from heavy duty steel sheet. Steel balls(ø15mm) used in plastic cage. 10 Mechanical Turn Table with Scale Code No. : Size : L-370mm, W-370mm, H-50mm o o Capacity : 1500kg each having scale of +_ 0-60 Dia : 350mm Weight: kg Passenger Car. Material : Made from heavy duty steel sheet. Electroplated to prevent rusting. Steel balls(ø12mm) used in plastic cage. 11 Mechanical Turn Table for Passenger Car with Scale, Ramp & Centre Line Code No. : Size : L-370mm, W- 670mm, H-53mm Capacity : 1500kg each Dia : 350mm Weight: kg Passenger Car. Ramp is made on turntable Material : Special Steel. Electro less Plating. Steel balls(ø12mm) used in plastic cage. 12 Mechanical Turn Table with Scale & Rubber Stoppers (Light Weight) Code No. : Size : L-395mm, W-395mm, H-50mm Capacity : 1500kg each Dia : 350mm Weight: 6.220kg Passenger Car. Material : Made from special grade of Aluminum. Plastic balls(ø10mm) used in plastic cage. Rubber Stoppers Only (For Turntable ) Set of 2pcs Code No.: RS Size : 322mmx55mmx16mm Weight: 153gms per pc

13 1100217 14 1100917 15 1101417 13 Mechanical Turn Table (Heavy Duty) Code No.

: 27.260kg Use : Used for easy turning of tyre left / right during alignment of

:1100917 Size : L-400mm, W-470mm, H-50mm Capacity : 1500kg each Dia : 360mm Weight :

right. Material : Special Steel. Steel balls(ø12mm) used in plastic cage.

: 1100917RS Size : 540mmx90mmx50mm Weight: 2.600kg per pc.

:1101417 Capacity : 6000kg each Dia : 400mm Weight: 6.

Commercial Vehicles. Material : Made from special grade of Aluminum. Anodized Finish.

: 1100317 Size : L-480mm, W-480mm, H-74mm 0 0 0 Capacity: 7000kg each having scale

Material : Made from cold roll (CRC) steel sheet. Plastic balls.

4 Mechanical Turn Table (Heavy Duty) Code No. : Size : L-350mm, W-400mm, H- 50mm Capacity : 2500kg each Dia : 350mm Weight : kg Use : Used for easy turning of tyre left / right during alignment of Light Commercial Vehicles. Material : Special Steel. Steel balls(ø12mm) used in steel cage. 14 Mechanical Turn Table with Rubber Stoppers Code No. : Size : L-400mm, W-470mm, H-50mm Capacity : 1500kg each Dia : 360mm Weight : kg Use : Used with 3D Wheel Alignment Machines for easy turning of tyre left / right. Material : Special Steel. Steel balls(ø12mm) used in plastic cage. Rubber Stoppers Only (For Turntable ) Set of 2pcs Code No. : RS Size : 540mmx90mmx50mm Weight: 2.600kg per pc. 15 Mechanical Turn Table for Truck / Buses (Light Weight) Code No.: Capacity : 6000kg each Dia : 400mm Weight: 6.600kg Use : Used for easy turning of tyre left / right during alignment of Light Commercial Vehicles. Material : Made from special grade of Aluminum. Anodized Finish. Steel balls. (Ø10mm) 16 Mechanical Turn Table for Truck / Buses with Scale Code No. : Size : L-480mm, W-480mm, H-74mm Capacity: 7000kg each having scale of 0-60 and ±30 Dia : 480mm Weight : kg Truck / Buses. Material : Made from cold roll (CRC) steel sheet. Plastic balls. (Ø18mm) used in plastic cage. 17 Mechanical Turn Table for Truck / Buses with Scale, Ramp & Centre Line Code No. : Size : L-480mm, W-881mm, H-79mm Capacity : 7000kg each Dia : 480mm Weight : kg Truck / Buses. Ramp is made on turntable Material : Special Steel. Plastic balls(ø18mm) used in plastic cage

18 1105417 WHEEL ALIGNMENT TURN TABLE REBUILD KIT (STANDARD) 19

Qty 9/16"Derlin Bearings 54 No. Stainless Steel Lock Pins 4 No.

Note : Retainer Ring Inner Dia : 5 7/8", Outer Dia : 7 3/4".

: 1130017 Size : L-350mm, W-340mm, H- 50mm Capacity : 1000kg each

000kg Top Plate Length : 300mm Use : Used for aligning the rear

20 Rear Wheel Alignment Slip Plate Code No.

while doing alignment. All metal parts are electroplated.

210kg 112184 315mm 675gms 112284 Use : It securely holds the

Covered with soft plastic to prevent damage to the steering wheel.

5 WHEEL ALIGNMENT TURN TABLE REBUILD KIT (STANDARD) Wheel Alignment Turn Table Rebuild Kit (Standard) Code No. : Weight: 455gms The Kit contains the following items : Qty 9/16"Derlin Bearings 54 No. Stainless Steel Lock Pins 4 No. Retainer Rings With Spring Assemblies 2 No. Steel Set Screws 2 No. Steel Top Screws 2 No. Material : The Retainer Rings are made from plastic. Note : Retainer Ring Inner Dia : 5 7/8", Outer Dia : 7 3/4". 19 Rear Wheel Alignment Slip Plate Code No. : Size : L-350mm, W-340mm, H- 50mm Capacity : 1000kg each Weight : 9.000kg Top Plate Length : 300mm Use : Used for aligning the rear wheel of Passenger Car. Material : Sheet Metal. 20 Rear Wheel Alignment Slip Plate Code No. : Size : L-1640mm, W-670mm, H- 50mm Capacity : 2500kg each Weight : kg Use : Used for aligning the rear wheel of Passenger Car. Material : Sheet Metal. 21 Brake Pedal Depressor Length Weight Code No. 755mm 900gms mm 915gms Use : Depresses brake while doing alignment. All metal parts are electroplated. 22 Steering Wheel Holder Length Weight Code No. 430mm 1.210kg mm 675gms Use : It securely holds the steering wheel in position when setting toe angle. Covered with soft plastic to prevent damage to the steering wheel. 23 Steering Wheel Holder with Thumb Lock Release Length Weight Code No. 330mm 695gms Use : It securely holds the steering wheel in position when setting toe angle. Works with a trigger controlled mechanism. Ergonomically designed with a thumb lock release. Note : The Steering Wheel Holder is suitable for Car/ Truck / Buses

6 Global Presence in more than 70 countries around the world Sarveshwari Engineers 355 Deepali, Pitampura, Delhi (INDIA) Tel.: , Fax.: info@sarveshwari.com, sarv@vsnl.com

355 Deepali, Pitampura, Delhi Deepali, Pitampura, Delhi- 1 Tel.: 01

500mm ADIUM ME VAN CHRO TYRE SERVICE TOOLS Sarveshwari Engineers 355 Deepali, Pitampura, Delhi- 0034 Tel.: 0-27023750, 0-2702499, Fax: 0-2702629 Website : / Email : info@sarveshwari.com 220057 2 220067