Tyre Changer / Wheel Balancer. Two/Four Post Lift. Company Introduction: TYRE CHANGER
|
|
- Meagan Rice
- 6 years ago
- Views:
Transcription
1
2 01 02 Tyre Changer / Wheel Balancer Two/Four Post Company Introduction: GMX International Co.,LTD is engaged in producing and distributing of automobile maintenance equipments, including tyre changer, wheel balancer, two post lift, four post lift, scissor lift iand etc. We have already obtained CE and ISO9001:2000 quality certification. Our products have powerful quality security guarantees, enjoying popular sales in both domestic and overseas markets such as regions in Europe, Oceania, the Middle East, Africa, South America and North America, especially, the tyre changer, wheel balancer and four-post lift have been praised highly by the experts and customers all around the world, and are being ordered by our customers at steady qty. We will keep on developing higher technology to continuously supply the first-class automobile maintenance products. Our company would like to keep further communication and cooperation with all our customers in order to meet the higher demand and to provide better service to our customers. We feel confident that we are moving forward to achieve the world leading position! TYRE CHANGER... 03~18 WHEEL BALANCER... 19~34 TWO POST LIFT... 35~58 FOUR POST LIFT... 59~70 SCISSORS LIFT... 71~76
3 Tyre Changer Tyre Changer Movable vertical shaft fix for different size wheels to correct position easily and quickly and also not damage the tyre bead. The max. wheel size for this model could up to 30 and also suitable for car, van. The standard accessory includes the inflation device and bead blaster. Its reasonable design, high quality and convenient operation are praised by customers. 380V 10~ mm 3-15 Tool head moving back and forth control system: suitable for wheel size from 10 to 30 Mounting tyre without lever to protect the rim from damage; Dual pressing direction bead breaker not break the tyre. Vertical shaft control system: moving back and forth and suitable for size from 10 to 30 With wheel lock nut to lock the wheel fast. The lower bead breaker disk control system: work with the upper disk to demount the lower bead. Air relief valve, bead blast control valve and pressure regulator can adjust air pressure inside of the tank. The pressure inside should be adjusted to 0.6~0.7Mpa. The upper bead breaker disk control system: work with the lower disk when breaking the bead to protect rim from damage. Imported Hydraulic Control System. Dual safety device make stong force of the bead blaster more safety. Motor Power Oil Pressure Motor Rotational Speed Working Oil Pressure Working Air Supply Turntable Rotational Speed Bead Breaker Force Sw ing Arm Rotation Radius Weight Shaft Longitudinal Shift Dimensions(WxDxH ) 0.9/1.1kw 16Mpa 1400/2800r/min 8-12Mpa 8-10 Bar 6.8/13.6rpm 1400kg 600mm 620kg 285mm 1700x1300x1750mm Three-point bead pressing system makes easily mount/demount the tyre, especially for hard tyre. Aluminum and stainless air valve body. Imported electronic components. Camera and LCD device could visually monitor the lower bead breaker position. 2-Speed motor to speed up when mount/demount the tyre. Pneumatic bead presser. Tool head rotation system: can adjust the tool head direction fast and mount/demount the tyre efficiently
4 Tyre Changer Tyre Changer Automatic leverless tool head--automatically demount the tyre without lever. Angle changed bead breaker disk--automatically change disk angle to insert the bead for breaking the bead easlly. Wheel lock device--position the rim in the center fast and exactly. Dual disk flexible axle pneumatic control device--control upper and lower bead breaker disk move synchronously. 380V 9~ mm 4-14 Automatic leverless tool head with the advantage of tilt-back and swing-arm tyre changer. Optional 2-speed motor(7rpm/14rpm)to make operation efficient. Pneumatic locking assist arm presser makes more powerful for pressing the tyre. Movable foot pedal assembly is more convenient for service. With special design of bead breaker device protect rim from damage. Upright inflation device display the value for reference when inflating. Weight tray with inflation device for displaced balancing weight. Pneumatic assist arm make low-profile and large size tyre mount/demount easily Equipped with full-flow inflation system V 9~ mm 4-15 Motor Power Motor Rotational Speed Air Supply Turntable Rotational speed G.W / N.W Dimensions(WxDxH ) 0.9/1.1kw 1400/2800r/min 07-08Mpa 6.8/13.6rpm 560/505kg 1500x1300x1850mm 1500x1200x1740mm Motor Power Turntable Rotational speed Air Supply G.W/N.W 380V 0.7/0.9kw 220V/1.1kw 6.8/13.6rpm Mpa 400kg/352kg 1150x1000x1900mm 05 06
5 07 08 Tyre Changer Tyre Changer Automatic leverless tool head The adjustable jaw clamp has obtained national technical monopoly. With dual mechanical assist arms. Optional 2-speed motor (7rpm/14rpm)to make operation efficient. Bead blaster device for easier inflation, fixed or not on the machine and suitable for various tyres. Automatic leverless tool head. Pneumatic locking assist arm presser makes more powerful for pressing the tyre. Movable foot pedal assembly is more convenient for service. High-quality PCL inflation gauge display value more accurate. Stainless air valve stand wear and tear. Pneumatic assist arm make low-profile and large size tyre mount/demount easily. 220/380V 11~ mm /380V 9~ mm 4-15 Motor Power 1.1/0.75kw Motor Power 1.1/0.75kw Turntable Rotational speed 6.8rpm Turntable Rotational speed 6.8rpm Air Supply Mpa Air Supply Mpa G.W/N.W 453kg/372kg G.W/N.W 432kg/350kg 1300x1200x1950mm 1150x1000x1780mm
6 09 10 Tyre Changer Tyre Changer The adjustable jaw clamp has obtained national technical monopoly. With dual mechanical assist arms. Optional 2-speed motor (7rpm/14rpm)to make operation efficient. Bead blaster device for easier inflation fixed or not on the machine and suitable for various tyres. 220/380V 11~26 Automatic position presser helps duck head demount the bead. Assist arm center pressing cone shaft help clamp the rim smoothly. Pressing arm available for 360 rotate and easy for mounting the tyre. Wheel lifting plate help lift the tyre. Four-in-one assist arm and quick change adapter both get national patent. Bead breaking blade design according to the bead structure. FOUR-IN-ONE TYRE CHANGER. Top assist arm is flexible,quickly to operate and also saving space. Easy for install and for upgrading. With all the functions of dual assist arms. Suitable for ordinary and low-profile tyres. 1050mm /380V 11~26 980mm 4-15 Motor Power Turntable Rotational speed Air Supply G.W/N.W 380V0.7/0.9kw 220V1.1kw 6.8/13.6rpm Mpa 453kg/372kg 1300x1100x1800mm Motor Power Turntable Rotational speed Air Supply G.W/N.W 1.1/0.9kw 6.8/13.6rpm Mpa 350kg/295kg 1300x1100x1050mm
7 11 12 Tyre Changer Tyre Changer Tilt-back low profile tyre changer. With tilting back column and horizontal arm pneumatic locking. Suitable for low profile tyre and not damage the rim and tyre. Bead breaking blade design according to the bead structure. Aluminum alloy air valve and stainless air valve shaft. With automatic assist arm for standard specification. Tilt-back low profile tyre changer. With automatic assist arm for standard specification. With tilting back column and horizontal arm pneumatic locking. Suitable for low profile tyre and not damage the rim and tyre. Bead breaking blade design according to the bead structure. Aluminum alloy air valve and stainless air valve shaft V 9~ mm V 11~ mm 4-15 Motor Power 1.1/0.75kw Motor Power 1.1/0.75kw Turntable Rotational Speed 6.8rpm Turntable Rotational speed 6.8rpm Air Supply Mpa Air Supply Mpa G.W/N.W 420kg/340kg G.W/N.W 410kg/330kg 1150x1000x1700mm 1150x1000x1700mm
8 13 14 Tyre Changer Tyre Changer Tilt-back low profile tyre changer. With tilting back column and horizontal arm pneumatic locking. Suitable for low profile tyre and not damage the rim and tyre. Aluminum alloy air valve and stainless air valve shaft. Tilt-back low profile tyre changer. With tilting back column and horizontal arm pneumatic locking. Suitable for low profile tyre and not damage the rim and tyre. Bead breaking blade design according to the bead structure. Aluminum alloy air valve and stainless air valve shaft V 9~ mm V 11~ mm 4-15 Motor Power 1.1/0.75kw Motor Power 1.1/0.75kw Turntable Rotational speed 6.8rpm Turntable Rotational speed 6.8rpm Air Supply Mpa Air Supply Mpa G.W/N.W 350kg/270kg G.W/N.W 350kg/270kg 1150x1000x950mm 1150x1000x1800mm
9 15 16 Tyre Changer Tyre Changer With automatic swing assist arm for low-profile tyres. Duck head can be adjusted to fit for 11"to 22" tyres. Reasonable duck head position. Bead breaking blade design according to the bead structure. Assist arm center pressing cone shaft help clamp the rim smoothly. Wheel lifting plate on the assist arm operate fast and easily. Station1: Wheel lifting performance Station 2: Center pressing cone shaft help clamp the rim smoothly V 11~22 980mm 4-15 Station 3: Pressing arm rotate following the tyre Station 4: Automatic position presser helps duck head demount the bead V 11~22 980mm 4-15 Motor Power 1.1/0.75kw Motor Power 1.1/0.75kw Turntable Rotational speed 6.8rpm Turntable Rotational speed 6.8rpm Air Supply Mpa Air Supply Mpa G.W/N.W 390kg/280kg G.W/N.W 280kg/210kg 1150x1000x1700mm 1150x1000x960mm
10 17 18 Tyre Changer Tyre Changer Motor Pow er Turntable Rotational speed Air Supply G.W/N.W Bead pressing device and pressing shaft for mount/demount hard tyre. Change slide block position for square turntable plate to adjust the clamping size. Change wheel size suitable for 11" to 22" by adjusting duck head angle. Bead breaking blade design according to the bead structure. Clamp support won t be deformed for its good precess and structure design; Alloy steel jaw clamp and spring plat between them to prevent turntable worn our and dust into it. 1.1/0.75kw 6.8rpm Mpa 280kg/210kg 1150x1000x960mm With Plastic protect kits to protect the rim not to damage V 11~22 980mm 4-15 For Motorcycle Tyre Motor Pow er Turntable Rotational speed Air Supply G.W/N.W For Car Tyre Rim Diameter External 8-22" Rim 3-12" Air Supply MPa 1.1/0.75kw 6.8rpm Mpa 248kg/200kg 980x880x960mm Suitable for car and motorcycle tyres and external clamping size up to 20" without other assist parts. Position changeable duck head(patent). Movable jaw clamps(patent)enlarge external clamping rim size. Bead break blade suitable for car and motorcycle. Adding motorcycle duck head as standard accessory. For motorcycle without disassembled the axle and braking device V 9~20 980mm 3-10
11 18 20 Wheel Balancer Wheel Balancer Italian intellectual property. 3D program: automatically data input for value A, D and L. Static and dynamic balancing program. Multi ALU balancing mode. OPT program: optimize the matching of tyre and rim. SPO program: to divide the balance weight and hide behind the spokes in a non-visible position. With foot pedal to brake when weight application. Store data for different wheel size. Software upgraded by USB port. Multi-language for chinese,english,germany and ltalian,etc. Unit of weight: gram/ounce;unit of measure:mm/inch. 19"LCD display screen. Weight Cutting System OPT program Waste Weight Recovery System SPO program Lighting System for Weight Stick Program Interface 220V GM820 12~24 800mm New visual graphical interface Multi-language for Chinese, English, Germany and Italian, etc. Internal gauge calibration External gauge calibration Brake the pedal to help sticking weight Motor Pow er 0.25kw Rim Center Hole Dia 145mm Measuring Time 7s Balancing Speed 180rpm Balancing Accuracy ±1g PC Computer Board 6layers CPU 32bit OS linux N.W/G.W 120/150kg 1150x800x1100mm Unit Converted for weight and measurement Multi modes of balancing suitable for different rim structures Visual computer animation displaying Computer display the exact weight position Automatically data input for value A and D with internal gauge Static balancing program Weight calibration procedure With internal gauge for sticking the weight Automatically data input with external gauge make effective
12 21 22 Wheel Balancer Wheel Balancer OPT program Program Interface SPO program New visual graphical interface Multi-language for Chinese, English, Germany and Italian, etc. Unit converted for weight and measurement Visual computer animation displaying Internal gauge calibration GM966 External gauge calibration Multi modes of Computer display the balancing suitable for exact weight position different rim structures Static balancing program Automatically data input for value A and D with internal gauge Italian intellectual property. 3D program: automatically data input for value A, D and L. Static and dynamic balancing program. Multi ALU balancing mode. SPO program: to divide the balance weight and hide behind the spokes in a non-visible position. OPT program: to optimize the matching of tyre and rim. With foot pedal to brake when weight application. Store data for different wheel size. Software upgraded by USB port. Multi-language for chinese, English, Germany and ltalian,etc. Unit of weight:gram/ounce; Unit of measure:mm/inch. 3 kinds of cone size from 40mm to 145mm. 19"LCD display screen. Technical Data Motor Pow er 0.25kw Rim Center Hole Dia 145mm Measuring Time 7s Balancing Speed 180rpm Balancing Accuracy ±1g PC Computer Board 6layers CPU 32bit OS Linux 1150x800x1100mm N.W/G.W 120/150kg 220V 12~24 800mm
13 23 24 Wheel Balancer Wheel Balancer GM977 Motor Pow er Rim Center Hole Dia Measuring Time Balancing Speed 220 V 12~24 800mm kw 145mm Italian intellectual property. Automatically data input for value A, D and L with internal and external gauge. Multi modes of balancing program for different rim structures. SPO program: to divide the balance weight and hide behind the spokes in a non-visible position. OPT program: optimize the matching of tyre and rim. With foot pedal to brake when weight application. Store data for different wheel size. Software upgraded by USB port. Multi-language for Chinese, English, Germany and ltalian,etc. Unit of weight:gram/ounce; Unit of measure:mm/inch. With cone size from 40mm to 145mm. 19"LCD display touch screen. Adopt 6 layers of computer board, 32 bit CPU and with linux system. Pneumatic locking shaft. Adopt magnetic braking system and hear beep for weight application. On touch screen to operate. 7s Balancing Accuracy ±1g PC Computer Board CPU OS N.W/G.W 180rpm 6layers 32bit Linux 1150x800x1100mm 120/150kg OPT program: to optimize the matching of tyre and rim SPO program: to divide the balance weight and hide behind the spokes in a non-visible position LED screen indicate the position for inside weight sticking 220V 12~24 800mm Self-developed intellectual property. 3D program: automatically data input for value A, D and L. Static and dynamic balancing program. Multi balancing modes. SPO program: to divide the balance weight and hide behind the spokes in a non-visible position. OPT program: optimize the matching of tyre and rim. With foot pedal to brake when weight application. Unit of weight:gram/ounce; Unit of measure: mm/inch. 3 kinds of cone size from 40mm to 145mm. GM986 Technical Data Motor Pow er Rim Center Hole Dia Measuring Time Balancing Speed 0.25kw 145mm 7s Balancing Accuracy ±1g N.W/G.W CPU 180rpm 820x820x1100mm 120kg/150kg 32bit
14 25 26 Wheel Balancer Wheel Balancer 220V 12 / mm V 12 / mm GM718 Motor Pow er Rim Center Hole Dia Measuring Time Balancing Speed 0.25kw 135mm Self-research intellectual property. 2D program: automatically data input for value A and D. 3D program: automatically data input for value A, D and L. Static and dynamic balancing program. Multi ALU balancing mode. SPO program: to divide the balance weight and hide behind the spokes in a non-visible position. OPT program: optimize the matching of tyre and rim. The shaft stopped when machine diagram the unbalance weight. Unit of weight:gram/ounce; Unit of measure: mm/inch. 4 kinds of cone size from 40mm to 145mm. Automatically data input with internal gauge to stick on the weight inside of rim. Lengthening shaft suitable for over wide rim. 7s Balancing Accuracy ±1g N.W/G.W CPU Air supply 180rpm 820x820x1160mm 118/146kg 32bit Mpa GM722 Motor Pow er Rim Center Hole Dia Measuring Time Balancing Speed 0.25kw 135mm Self-research intellectual property. 2D program: automatically data input for value A and D. 3D program: automatically data input for value A, D and L. Static and dynamic balancing program. Multi ALU balancing mode. SPO program: to divide the balance weight and hide behind the spokes in a non-visible position. OPT program: optimize the matching of tyre and rim. The shaft stopped when machine diagram the unbalance weight. Unit of weight: gram/ounce; Unit of measure:mm/inch. 4 kinds of cone size from 40mm to 145mm. Automatically data input with internal gauge to stick on the weight inside of rim. Lengthening shaft suitable for over wide rim. With pneumatic locking shaft,wheel hood and external gauge for standard. 7s Balancing Accuracy ±1g N.W/G.W CPU Air supply 180rpm 820x820x1160mm 118/146kg 32bit Mpa
15 27 28 Wheel Balancer Wheel Balancer GM702 GM70 Heat treatment balancing shaft improve the hardness, abrasion resistance and using time. Multi balancing mode fix for different rim stucture. 3 kinds of positioning ways for selection. With self-calibration program for trouble diagram. Measurement unit (gram/ounce, mm/inch). Consistently balancing the tyre and suitable of rim manufacture. Heat treatment balancing shaft improve the hardness, abrasion resistance and using time. Multi balancing mode fix for different rim stucture. 3 kinds of positioning ways for selection. With self-calibration program for trouble diagram. Measurement unit (gram/ounce,mm/inch). Consistently balancing the tyre and suitable of rim manufacture. GM70 GM V 12 / mm V 12 / mm Motor Pow er 0.25kw Rim Center Hole Dia 145mm Measuring Time 7s Balancing Speed 180rpm Balancing Accuracy ±1g 820x820x1160mm N.W/G.W 118/146kg Motor Pow er 0.25kw Rim Center Hole Dia 145mm Measuring Time 7s Balancing Speed 180rpm Balancing Accuracy ±1g 820x820x1160mm N.W/G.W 118/146kg
16 29 30 Wheel Balancer Wheel Balancer Car and Truck Wheel Balancer Truck Wheel Balancer Available for different tyre size by shifting Model key to select With pneumatic lifting trolley. With automatic pneumatic braking system. Enhanced main shaft for long time using. Dual cup and adjusted air/oil regulator. With folded wheel protect hood. Motor Pow er 220V/380V-750W Air supply Mpa Rim 3/20" Rin Diameter 12/24" Rim Center Hole Dia Ø50mm-Ø215mm Rim Center Hole Dia Ø275mm-Ø285mm Max.Wheel Diameter 1200mm Measuring Time Car7sTruck10s Balancing Speed 210rpm Balancing Accurack Car±1gTruck±25g 1650x880x1260mm N.W/G.W 300/370kg Available for different tyre size by shifting Model key to select. With pneumatic lifting trolley. With automatic pneumatic braking system. Enhanced main shaft for long time using. Dual cup and adjusted air/oil regulator. Motor Pow er 220V/380V-750W Air supply Mpa Rim 3/20" Rin Diameter 12/24" Rim Center Hole Dia Ø145mm-Ø220mm Rim Center Hole Dia Ø275mm-Ø285mm Max.Wheel Diameter 1200mm Measuring Time 10s Balancing Speed 210rpm Balancing Accurack ±25g 1650x880x1260mm N.W/G.W 300/370kg GM1288 Balancing mode for car: can balance tyre from 12 to 16 GM1200 Could lubricate components through the air line so that make to use long time; The air pressure be adjusted from 0.3Mpa to 0.6Mpa by regulate the knob. Bolts Positioning Way (Optional) Centre Core Positioning Suitable for high precision rim of center core and precision between bolts and center core CH: mm; mm
17 31 32 Tyre Changer Tyre Changer Energy Saving Up to 45% Energy Saving Principle for Tyre Changers Protective Kits for Tyre Changers It will damage the rim, especially for alloy rim if operation is not correct when mount and demount the tyre. For this, we have developed some plastic kits for duck head, jaw clamps and bead breakers to protect the rim safety. New Duck Head Bead Break Cover (Exclude model GM-650) With plastic duck insert Jaw Clamp Cover (Different for models) The new tpre duck head is various angles and stainless duck head which developed by thousands of test. It will mount/ demount the tyre smoothly and will not damage the tyre and rim also for rust. Plastic Cover for Standard Jaw Clamps Plastic Cover for Adjust Jaw Clamps Jaw Clamp Cylinder The big size aluminum cylinder liner and aluminum cylinder piston make jaw clamps more powerful.
18 33 34 Wheel Balancer Wheel Balancer Core components are imported and with high quality, which made test and more durable. With self-calibration function Three kinds of positioning ways for selection With multi balancing choice for different wheel structures With Flange Mounting Internal Mounting External Mounting High-precision shaft The shaft bearing was imported and made heat treatment. The grinding shaft assembly surface could ensure the accuracy of secondary disassembly. (The rim is in the condition of accuracy) The tolerance is 5 more or less for chasing weight. Centre Core Positioning High-precision cone quick locking and positioning the wheel Balancer blind adapter Suitable for Citroen and Elysee tyres without center hole
19 35 36 Two Post Two Post GM T Two Post GM T Two Post Hidden power cord and hydraulic hose, good surface looking. Driven by dual hydraulic cylinders, make it ascents and descents smoothly. Electric-controlled automatic 4-locking protective system. Chain-style elevating system. Balanced by steel wire rope. Tri-sector type asymmetrical arm can be widely used for raising many kinds of cars. 360 arm with Side-locking for more security and reliability. The lowest lift height is only 100mm, facilitate raising the top-grade cars. Controlled by computer IC Board without misoperation. Overbeam protective mechanism for preventing vehicle being damaged due to over-lifting, it will prolong the working life of hydraulic unit and cylinders. 2805( ) Weight Lowest Lane N.W 1920(75.59 ) 1953(76.89 ) 2047(80.59 ) 2844( ) R858(33.78 ) R1300(51.18 ) R590(23.23 ) GM-6134 GM kg 4000kg 100mm (3.94") 100mm (3.94") 1920mm (75.59") 1920mm (75.59") 2844mm (111.97") 2844mm (111.97") 3419mm (134.61") 3419mm (134.61") 2500mm (98.43") 2500mm (98.43") 650kg 670kg min227(8.94 ) min133(5.24 ) min100(3.94 ) 1867(73.50 ) R800(31.50 ) R1080(42.52 ) 3419( )
20 37 38 Two Post GM T Two Post (Gantry) Two Post R1035 (40.75 ) R590 (23.23 ) R855 (33.66 ) R1295 (50.99 ) Gantry design, without influencing the floor space. Hidden power cord and hydraulic hose, good surface looking. Driven by dual hydraulic cylinders, make it ascents and descents smoothly. Tri-sector type asymmetrical arm can be widely used for raising many kinds of cars. Adjustable total height, applicability is wider. Controlled by computer IC Board, without misoperation. 2795( ) GM-6249 Weight 4000kg Lowest 105mm (4.13") 1900mm (74.80") 3915mm (154.13") 3515mm (138.39") Lane 2795mm (110.04") N.W 2480mm (97.64 ) Min105--Max1990 (4.13 )--(74.80 ) 3915/3625 ( )--( ) 3515( )
21 39 40 Two Post Two Post GM T Two Post 3569( ) 2490(98.03 ) R1075 (42.32 ) R655 (25.79 ) R895 (35.24 ) R1335 (52.56 ) "H" Bases late, reduce the requirement for the foundation. Hidden power cord and hydraulic hose, good surface looking. Driven by dual hydraulic cylinders, make it ascents and descents smoothly. Tri-sector type, asymmetrical arm can be widely used for raising many kinds of cars. Chain-style elevating system. Controlled by computer IC Board, without misoperation. 2000(78.74 ) (3.94 ) (5.91 ) (75.60 ) (77.56 ) ( ) 1400(55.12 ) ) GM-6345 Weight 4000Kg Lowest 100mm (3.94") 1920mm (75.59") 2884mm (113.54") 3569mm (140.51") Lane 2490mm (98.03") N.W 950Kg
22 41 42 Two Post GM T Two Post (Gantry) Two Post R922 (36.30 ) R1397(55.00 ) R576(22.68 ) R792(31.18 ) R1070(42.13 ) 3750( ) 3500( ) 2862( ) 2045(80.51 ) 1935(76.18 ) Gantry design, without influencing the floor space. Driven by dual hydraulic cylinders, it ascents and descents smoothly. Electric-controlled automatic 2-locking protective system. Raising driven directly by hydraulic cylinder. Balanced by steel wire rope. Tri-sector type asymmetrical arm can be widely used for raising many kinds of cars. Adjustable total height, applicability is wider. Controlled by computer IC Board, without misoperation. Overbeam protective mechanism for preventing vehicle being damaged due to over-lifting, it will prolong the working life of hydraulic unit and cylinders. GM-6035 Weight 3800Kg Lowest 135mm (5.31") 1935mm (76.18") 3750(3500)mm (147.64")(137.80") 3440mm (135.43") Lane 2490mm (98.03") N.W 735Kg 2490(98.03 ) 3440( )
23 43 44 Two Post GM T Two Post (Gantry) Two Post R735(28.84 ) R1045(41.14 ) R992 (39.06 ) R1470(57.87 ) Gantry design, without influencing the floor space. Balanced by steel wire rope. Driven by dual hydraulic cylinders, it ascents and descents smoothly. Power unit can be installed on any side of lift. Double-insured self-locking protective device, released by single-release safety. Wide space between columns Multi-voltage power supply is available for convenient use.(220v or 380V) ) 1800(70.87 ) GM-6445 Weight 4500Kg Lowest 115mm (4.53") 1800mm (70.87") 3752mm (147.72") 3690mm (145.28") Lane 2485mm (97.83") N.W 900Kg 2706( ) 3690( ) 115 (4.53 )
24 45 46 Two Post Two Post GM T Two Post R942 (37.09 ) R1452 (57.17 ) 2380(93.70 ) 420(16.54 ) R738 (29.06 ) R1041 (40.98 ) 2799( ) Common design. Driven by dual hydraulic cylinders, make it ascent and descent smoothly. Self-locking protective device with double safety. Chain-style elevating system. Balanced by steel wire rope. Asymmetrical design make it possible to open vehicle doors within narrow width between columns. 2844( ) Max1927(75.87 ) Max1833(72.17 ) Max1800(70.87 ) Weight GM kg 1800mm (70.87") Rise Time 50/s 2844mm (111.97") 3419mm (134.61") Between Pillars 2799mm (110.20") Lane 2380mm (93.70") Lowest 117mm (4.61") Power Supply 220/380V Min244(9.61 ) Min150(5.91 ) Min117(4.61 ) 3419( )
25 47 48 Two Post Two Post GM T Two Post R942 (37.09 ) R1452 (57.17 ) 2380(93.70 ) R738(29.06 ) R1041(40.98 ) Gantry design. Driven by dual hydraulic cylinders, make it ascent and descent smoothly. Self-locking protective device with double safety. Chain-style elevating system. Balanced by steel wire rope. Asymmetrical design make it possible to open vehicle doors within narrow width between columns. 3620( ) 2824( ) 2799( ) Max1927(75.87 ) Max1833(72.17 ) Max1800(70.87 ) Min244(9.61 ) Min150(5.91 ) Min117(4.61 ) Weight GM kg 1800mm (70.87") Rise Time 50/s 3620mm (142.52") 3419mm (134.61") Between Pillars 2799mm (110.20") Lane 2380mm (93.70") Lowest 117mm (4.61") Power Supply 220/380V 3419( )
26 49 50 Two Post Two Post GM T Two Post GM T Two Post R1185(46.65 ) 2688( ) 1998(78.66 ) R840(33.07 ) 2755( ) 2425(95.47 ) R840(33.07 ) 3050( ) 2720( ) R1185(46.65 ) Common design. Driven by dual hydraulic cylinders, make it ascent and descent smoothly. Self-locking protective device with double safety. Chain-style elevating system. Balanced by steel wire rope. Power unit can be installed on any side of lift. Wide space between columns. Multi-voltage power supply is available for convenient use.(220v or 380V). Max1980(77.95 ) Min101(13.98 ) 3690( ) 3360( ) 2900( ) Weight GM kg 1980mm (77.95") GM kg 1980mm (77.95") GM kg 1980mm (77.95") GM kg 1980mm (77.95") Rise Time 50/s 50/s 50/s 50/s 2900mm (114.17") 2900mm (114.17") 2900mm (114.17") 2900mm (114.17") 3690mm (145.28") 3360mm (132.28") 3690mm (145.28") 3360mm (132.28") Between Pillars 3050mm (120.08") 2720mm (107.09") 3050mm (120.08") 2720mm (107.09") Lane 2755mm (108.46") 2425mm (95.47") 2755mm (108.46") 2425mm (95.47") Lowest 101mm (3.98") 101mm (3.98") 101mm (3.98") 101mm (3.98") Power Supply 220/380V 220/380V 220/380V 220/380V
27 51 52 Two Post Two Post GM T Two Post (Gantry) GM T Two Post (Gantry) R1185(46.65 ) 2688( ) 1998(78.66 ) R840(33.07 ) 2755( ) 2425(95.47 ) R840(33.07 ) R1185(46.65 ) Gantry design, without influencing the floor space. Driven by dual hydraulic cylinders, make it ascent and descent smoothly. Self-locking protective device with double safety. Chain-style elevating system. Balanced by steel wire rope. Power unit can be installed on any side of lift. Wide space between columns. Multi-voltage power supply is available for convenient use.(220v or 380V). 3050( ) 2720( ) Max1980(77.95 ) Min101(3.98 ) 3700( ) Weight GM kg 1980mm (77.95") GM kg 1980mm (77.95") GM kg 1980mm (77.95") GM kg 1980mm (77.95") Rise Time 50/s 50/s 50/s 50/s 3700mm (145.67") 3700mm (145.67") 3700mm (145.67") 3700mm (145.67") 3690mm (145.28") 3360mm (132.28") 3690mm (145.28") 3360mm (132.28") Between Pillars 3050mm (120.08") 2720mm (107.09") 3050mm (120.08") 2720mm (107.09") Lane 2755mm (108.46") 2425mm (95.47") 2755mm (108.46") 2425mm (95.47") Lowest 101mm (3.98") 101mm (3.98") 101mm (3.98") 101mm (3.98") Power Supply 220/380V 220/380V 220/380V 220/380V 3690( ) 3360( )
28 53 54 Two Post Two Post GM T Two Post R943(37.13 ) R1325(52.17 ) 520 (20.47 ) Driven by dual hydraulic cylinders, make it ascent and descent smoothly. Self-locking protective device with double safety. Chain-style elevating system. With strong capability, especially applys to imported cross-country cars. 3056( ) Weight Lowest Lane N.W Max2021(79.57 ) Max1921(75.63 ) Min263(10.35 ) Min163(6.42 ) 3070( ) 3113( ) 2306(90.79 ) R943(37.13 ) R1325(52.17 ) 875 (34.45 ) 2731( ) GM Kg 163mm (6.42") 1921mm (75.63") 3113mm (122.56") 3756mm (147.87") 2731mm (107.52") 1048Kg 2716( ) 3756( )
29 55 56 Two Post Two Post GM T Two Post R943(37.13 ) R1325(52.17 ) 3070( ) 2306(90.79 ) R943(37.13 ) 520 (20.47 ) 875 (34.45 ) Gantry design, without influencing the floor space. Driven by dual hydraulic cylinders, make it ascent and descent smoothly. Self-locking protective device with double safety. Chain-style elevating system. With strong capability, especially applys to imported cross-country cars. Weight Lowest Lane N.W 3056( ) GM Kg 163mm (6.42") 1921mm (75.63") 4596mm (180.94") 3756mm (147.87") 2731mm (107.52") 1100Kg Max2021(79.57 ) 3070( ) Max1921(75.63 ) Min263(10.35 ) Min163(6.42 ) 1576(62.05 ) 708(27.87 ) R1325(52.17 ) 4456( ) 3756( )
30 57 58 Four Post Four Post GM T Four Post GM T Four Post GM T Four Post 3160( ) 2630( ) 510 (20.08 ) 510 (20.08 ) (49.21 )-(61.81 ) The positioning level is precise and adjustable, which is the ideal equipment for four-wheel alignment. Lengthened sliding plate for various kinds of cars. Optional parts: 3 or 2 ton manual rolling jack 3 or 2 ton pneumatic rolling jack. 2430(95.67 ) 1700(66.93 ) Weight GM kg 2430mm (95.67") GM kg 2430mm (95.67") 3380mm (133.07") 3380mm (133.07") Power 2.2Kw 2.2Kw 1700mm (66.93") 1700mm (66.93") Lane 2780mm (109.45") 2780mm (109.45") Runway 510mm (20.08") 510mm (20.08") Runway Length 4570mm (179.92") 5250mm (206.69") Power Supply 220V/380V 220V/380V 180(7.09 ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) 900(35.43 ) GM kg 2430mm (95.67") 3380mm (133.07") 2.2Kw 1700mm (66.93") 2780mm (109.45") 510mm (20.08") 6330mm (249.21") 220V/380V GM ( ) GM ( ) GM ( )
31 59 60 Four Post Four Post GM T Four Post GM T Four Post GM T Four Post 3160( ) 2630( ) 510 (20.08 ) 510 (20.08 ) (49.21 )-(61.81 ) The positioning level is precise and adjustable, which is the ideal equipment for four-wheel alignment. Lengthened sliding plate for various kinds of cars. Optional parts: 3 or 2 ton manual rolling jack 3 or 2 ton pneumatic rolling jack. Weight Power Lane Runway Runway Length Power Supply 2430(95.67 ) 1700(66.93 ) GM kg 2430mm (95.67") GM kg 2430mm (95.67") GM kg 2430mm (95.67") 3160mm (124.41") 3160mm (124.41") 3160mm (124.41") 2.2Kw 2.2Kw 2.2Kw 1750mm (68.90") 1750mm (68.90") 1750mm (68.90") 2780mm (109.45") 2780mm (109.45") 2780mm (109.45") 510mm (20.08") 510mm (20.08") 510mm (20.08") 4570mm (179.92") 5250mm (206.69") 6330mm (249.21") 220V/380V 220V/380V 220V/380V 180(7.09 ) GM ( ) GM ( ) GM ( ) 900(35.43 ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( )
32 61 62 Four Post Four Post GM T Four Post GM T Four Post GM T Four Post 2225(87.60 ) 1700(66.93 ) 170(6.70 ) 970(38.19 ) GM ( ) GM ( ) GM ( ) GM ( ) GM (88.98 ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) Driven by hydraulic cylinders, transmitted by steel wire rope, it works quietly, safely and reliably. Steel wire rope and safety handle are fixed on top of column. Approach ramps prevent vehicles from sliding backwards and front-wheel blocks prevent vehicles from sliding forward. Numeric control bending machine and numeric control cutting machine are used to ensure precision of lift size. Steel-ball blasting and plastic spraying workmanship are adopted to ensure the surface looking good for a long time. Optional parts: 3 or 2 ton manual rolling jack 3 or 2 ton pneumatic rolling jack. GM-8141 GM-8142 GM-8144 Weight 4500kg 3500kg 5500kg 2225mm (87.60") 2225mm (87.60") 2225mm (87.60") 3120mm (122.83") 3120mm (122.83") 3470mm (136.61") Power 2.2Kw 2.2Kw 2.2Kw 1700mm (66.93") 1700mm (66.93") 1700mm (66.93") Lane 2660mm (104.72") 2660mm (104.72") 3010mm (118.50") Runway 490mm (19.29") 490mm (19.29") 490mm (19.29") Runway Length 4860mm (191.34") 4260mm (167.72") 4860mm (191.34") Power Supply 380V 380V 380V
33 63 64 Four Post Four Post GM T Four Post (Alignment) GM T Four Post (Alignment) GM T Four Post (Alignment) 2225(87.60 ) 1700(66.93 ) 170(6.70 ) 970(38.19 ) GM ( ) GM ( ) GM ( ) GM ( ) GM (88.98 ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) GM ( ) GM-8041 GM-8042 GM-8044 Front-open design convenient for operation. Driven by hydraulic cylinders, transmitted via steel; wire rope. Pneumatic mechanical locking system, protect whole operating process. Insured mechanical locking system for cable broken. Wide Stops(front and rear) for preventing vehicle sliding out of runway. Optional parts: 3 or 2 ton manual rolling jack. 3 or 2 ton pneumatic rolling jack. Weight 4500kg 3500kg 5500kg 2225mm (87.60") 2225mm (87.60") 2225mm (87.60") 3120mm (122.83") 3120mm (122.83") 3470mm (136.61") Power 2.2Kw 2.2Kw 2.2Kw 1750mm (68.90") 1750mm (68.90") 1750mm (68.90") Lane 2660mm (104.72") 2660mm (104.72") 3010mm (118.50") Runway 490mm (19.29") 490mm (19.29") 490mm (19.29") Runway Length 4860mm (191.34") 4260mm (167.72") 4860mm (191.34") Power Supply 380V 380V 380V
34 Four Post Four Post GM T Four Post GM T Four Post GM T Four Post 2395(94.29 ) Min221 - Max1850 (8.70 ) (72.83 ) GM ( ) GM ( ) GM ( ) 1875 (73.82 ) 1745 (68.70 ) 430 (6.92 ) Front-open design, convenient for operation. Driven by hydraulic cylinder, transmitted via steel; wire rope. Pneumatic mechanical locking system, protect whole operating process. Insured mechanical locking system for cable broken. Wide Stops(front and rear) for preventing vehicle sliding out of runway. Optional parts: 3 or 2 ton manual rolling jack. 3 or 2 ton pneumatic rolling jack. Weight Lowest Lane Runway Runway Length N.W 3483 ( ) 3003 ( ) 2984( ) 3530( ) GM-8461 GM-8451 GM kg 5500kg 4500kg 221mm (8.70") 221mm (8.70") 221mm (8.70") 1850mm (72.83") 1850mm (72.83") 1850mm (72.83") 2395mm (94.29") 2395mm (94.29") 2395mm (94.29") 3530mm (138.98") 3530mm (138.98") 3530mm (138.98") 3003mm (118.23") 3003mm (118.23") 3003mm (118.23") 510mm (20.08") 510mm (20.08") 510mm (20.08") 6151mm (242.17") 5231mm (205.94") 4851mm (190.98") 1870kg 1780kg 1740kg GM ( ) GM ( ) GM ( ) 65 66
35 67 68 Four Post Four Post GM T Four Post for Wheel Alignment 5280( ) 3333( ) 485(19.09 ) 485(19.09 ) (31.50 )-(43.31 ) Driven by hydraulic cylinders, transmitted by cable steel, it works quiet and safe and reliable. Drive-up ramps prevent vehicles from sliding backward and front-wheel blocks prevent vehicles from sliding forward. Optional parts: 2-ton manual rolling jack XT-2H. 2-ton pneumatic rolling jack 2A. Weight Lane Runway Runway Length GM kg 1750mm (68.90") 2275mm (89.57") 3333mm (131.22") 2863mm (112.72") 490mm (19.29") 5190mm (204.33") 2275(89.57 ) 4790( ) Min250--Max1890 (9.84 )--(74.41 )
36 69 70 GM T Parking GM T Parking Parking Parking 110(4.33 ) (GM-8136) (GM-8137) 474 (18.66 ) 2630(GM-8136) ( ) 2780(GM-8137) ( ) 1900 (GM-8136) (74.80 ) 2050 (GM-8137) (80.71 ) 474 (18.66 ) 4000(GM-8136) ( ) 3865(GM-8137) ( ) 4460(GM-8136) ( ) 4325(GM-8137) ( ) Min122 - Max1900 (4.80 ) - (74.80 ) Min122 - Max1830 (4.80 ) - (72.04 ) 2237(GM-8136) (88.07 ) 2237(GM-8137) (88.07 ) Driven by hydraulic cylinders, transmitted by steel wire rope, it works quietly, safely and reliably. Steel wire rope and safety handle are fixed on top of column. Approach ramps prevent vehicles from sliding backwards and front-wheel blocks prevent vehicles from sliding forward. Numeric control bending machine and numeric control cutting machine are used to ensure precision of lift size. Steel -ball blasting and plastic spraying workmanship are adopted to ensure the surface looking good for a long time. Optional parts: Safety insurance lock mechanism for cable breaking, avoid accident during lifting and lowering. GM-8136 GM-8137 Weight 3600kg 3600kg Lowest 122mm (4.80") 122mm (4.80") 1900mm (74.80") 1830mm (70.05") 2237mm (88.07") 2630mm (103.54") 2237mm 2780mm (88.07") (109.45") Lane 2267mm (89.25") 2417mm (95.16") Runway 474mm (18.66") 474mm (18.66") Runway Length 4200mm (165.35") 4065mm (160.04") N.W 760kg 750kg
37 71 72 Scissor GM T Scissor (Super Ultrathin) Scissor Hidden structure of lengthened broad pallet, make lift run smoothly and synchronously, convenient for maintenance of vehicle underneath. Impotted hydraulic,pneumatic and electric components, with stable and reliable equipment. Pneumatic two-tooth self-locking against pipe explosion, released automatically when lowering. Super-friction sliding block with oil-free. 480 (18.90 ) Power Supply Power Gas Source Weight GM V 2.2Kw 6-8kg/cm³ 3500kg 2000mm (78.74") 2000(78.74 ) 880 (34.65 ) 1840 (72.44 ) 480 (18.90 ) 280 (11.02 ) 1420 (55.91 )
38 73 74 Scissor Scissor GM T Scissor 3705( ) Min191 (7.52 ) Min1453(57.20 ) -- Max1923(75.71 ) 1970(77.56 ) 530 (20.87 ) 910 (35.83 ) 530 (20.87 ) 450 (18.37 ) 450 (18.37 ) 990(38.98 ) 1890(74.41 ) 2050(80.71 ) Max1820(71.65 ) Hidden structure of lengthened broad pallet, make lift run smoothly and synchronously, convenient for maintenance of vehicle underneath. Imported hydraulic,pneumatic and electric components, with stable and reliable equipment. Electric two-tooth self-locking against pipe explosion, released automaticly when lowering. Super-friction sliding block with oil-free. Super thin structure without digging ground pits, convenient for driving on and off the lift. Controlled by computer IC Board without misoperation. Overbeam protective mechanism for preventing vehicle being damaged due to over-lifting, it will prolong the working life of hydraulic unit and cylinders. Power Supply Power Weight GM V 2.2Kw 3200kg 1820mm (71.65")
39 75 76 GM T Scissor Scissor Scissor 1008(39.69 ) 1453(57.20 ) 102 (4.02 ) 1800(70.87 ) 53 (2.09 ) (3.94 ) - (51.18 ) Movable scissor lift with flexible and convenient use. Driven by dual hydraulic cylinders, make it ascents and descents smoothly. Equipped with different height of pads, used for raising many kinds of cars. Load capacity Raising Lowering tire ing height max Motor Power Hydraulic operating Pressure Operating environment ing height temperature Power supply 189 (7.44 ) GM kg Approx.51s 1300mm (51.18") 2.2KW 22MPa mm 1453mm 110V/60Hz (3.94"-51.18") (57.20")
An ISO 9001 : 2008 Certified Company
::: ELECTRO MECHANICAL TWO POST CAR LIFT ::: :: Model :- TPL 300 :: Electric motor Distance between column Width of base Max. length long arms Min. length long arms Max. length short arms Min. length short
More informationGARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP. Garage & Tyre Equipment CORK. Phone: Website:
GARAGE EQUIPMENT NATIONWIDE SALES SERVICE INSTALLATION AUTOQUIP Garage & Tyre Equipment CORK Two-Post Lifts PA-6140A Manual Lock Release PA-6140D Electric Lock Release P Our lifts are fitted with a low
More information01 Car Lifts
0404 01 Car Lifts 05 2 POST LIFT KET-4000G KET-4000 Model KET-4000G KET-4000 Capacity 4,000 kg 4,000 kg Max Lifting Height 1,870-1,900mm 1,870-1,900mm Min Lifting Height 130-210mm 130-210mm Lifting speed
More informationUTC_A01 Foot pedal inflation kit
UTC195A Automatic tyre changer Automatic tire changer with pneumatic forward/back swinging mounting arm, pneumatic locking mounting head and foot pedal inflation kit. Technical Specification: - Outside
More informationProfessional full-automatic tire changer TC680 Features
Professional full-automatic tire changer TC680 Main shaft moveable and adjustable for wheel with different diameter and width Rim diameter range from 10in to 32in Laser light help to find proper position
More informationWHEEL BALANCERS & TYRE CHANGERS QUALITY YOU EXPECT AT A PRICE YOU WOULDN T THE STANDARD IN INFORMATION, EQUIPMENT AND DIAGNOSTICS SYSTEMS
QUALITY YOU EXPECT AT A PRICE YOU WOULDN T THE STANDARD IN INFORMATION, EQUIPMENT AND DIAGNOSTICS SYSTEMS http://diagnostics.snapon.co.uk INTRODUCTION TYRE AND WHEEL BROCHURE The Sun range of Tyre Changers
More informationTCX575 Leverless Tire Changer with Bead Press System
TCX575 Leverless Tire Changer with Bead Press System Key features at a glance Bead Press System 3 Tremendous power and control 3 Aids mounting and demounting Auto-centering simplifies operation Swing Arm
More informationAutomotech Ser vices Ltd
Automotech Ser vices Ltd Specialists in vehicle lifts and garage equipment EST 1972 Issue 04-17 Call now: 01889 579945 www.automotechservices.co.uk Specialists in vehicle lifts and garage equipment Two
More informationS 561. Giuliano Industrial S.p.A.
Truck tyre changer 13"-27" for mobile tyre service Truck tyre changer for mobile service of truck, bus and road transportation vehicle tyres with 13"-27" rim (max. wheel diameter 1600 mm./63"; max. wheel
More informationEQUIPMENT & WORKSHOP FITOUTS SPECIALS
1ST APRIL - 31ST JULY 20I7 EQUIPMENT & WORKSHOP FITOUTS SPECIALS AAWA8CCD Wheel Aligner Large 24" LCD screen and compact console Infra-red transmission between all sensors Bluetooth transmission between
More informationWHEEL SERVICE EQUIPMENT TIRE CHANGERS TIRECHANGERS NOTHING ELSE IS A
WHEEL SERVICE EQUIPMENT TIRE CHANGERS TIRECHANGERS NOTHING ELSE IS A 3050LEVERLESS HIGH PERFORMANCE TRUE LEVERLESS TIRE CHANGER REQUIRES NO TIRE TOOL- NO METAL TO METAL CONTACT! 30 TIRE CHANGER with VARIABLE
More informationThe Coats X-Series. Now with Even More Power of Choice.
The Coats X-Series. Now with Even More Power of Choice. Coats has been the leader in tire service equipment for more than 60 years. And the Coats Rim Clamp tire changer has become the industry standard
More informationTIRE CHANGERS magic. memory. slivo GTB16N GRS926 G N
TIRE CHANGERS G 1150.30 magic 8945 memory 8645 slivo 7645 7246 7240 GTB16N GRS926 G9156.11N 3 G1150.30 MAGIC MAGIC LEVERLESS NO TIRE TOOL REQUIRED! MAGIC IT 30 LEVERLESS The real no lever tire changer
More informationFALCO EVO and 28 external clamping G-Frame rigidity Revolutionary bead breaker system Ergo Control Side Lift NG
24 and 28 external clamping G-Frame rigidity Revolutionary bead breaker system Ergo Control Side Lift NG FALCO EVO 624 628 Tilting back tyre changers Image shown above is indicative only. FALCO EVO 624
More informationBeissbarth workshop equipment
2012 Beissbarth workshop equipment For excellent service Innovative equipment technology for professional service Assured product quality Worldwide service guarantee Wheel Alignment Brake Testers Vehicle
More informationI N T R O D U C T I O N
I N T R O D U C T I O N Today s tyre market presents many challenges, including; run-flat systems, low profile tyres and increasing diameter sizes. Our tyre changers are famous worldwide for their outstanding
More informationMS 670. Best in class for tyre specialists
Tyre changer MS 670 Best in class for tyre specialists 30 center post tyre changer G-Frame rigidity Simple and reliable Side Lift NG Tyre leverless system Ergo Control Helper Device Product at a glance
More informationThe Coats X-Series The Power of Choice
The Coats X-Series The Power of Choice Coats has been the leader in tire service equipment for over 50 years. And the Coats Rim Clamp tire changer has become the industry standard due to its legacy of
More informationTCX575 & TCX565 Advanced Conventional Tire Changing Systems
TCX575 & TCX565 Advanced Conventional Tire Changing Systems Key features at a glance Bead Press System Tremendous power and control Aids mounting and demounting Auto-centering simplifies operation Swing-Arm
More informationMS 630 and MS 650. Best in class for tyre specialists. 22 and 28 external clamping G-Frame rigidity Revolutionary bead breaker system Ergo Control
Tyre changer MS 630 and MS 650 Best in class for tyre specialists 22 and 28 external clamping G-Frame rigidity Revolutionary bead breaker system Ergo Control MS 630 and MS 650 Advanced technology for high
More informationENHANCED HIGH PERFORMANCE
ENHANCED HIGH PERFORMANCE TM Model EHP System IV E With SRA and PBA Options TM ALL MODELS: NEW & IMPROVED Larger Manifold Hoses To Increase Opening Speed Of The Turntable. New Double The Number Of Locking
More informationSUPER-AUTOMATIC TYRE CHANGER XBOSS BP1 PLUS MOTOINVERTER DRIVE
SUPER-AUTOMATIC TOUCHLESS leverless TYRE CHANGER XBOSS BP1 PLUS TOTAL FULLY MOTOINVERTER DRIVE SAFE on Wheel, Fast on Work BP1 PLUS Bead pressing arm to ease mounting operations on low profiled and UHP
More informationProduct Presentation Launch Tech USA, Inc.
Product Presentation Launch Tech USA, Inc. Launch Tire Changers Model TWC 481 Model TWC 581 Model TWC 682 Model TWC481 Entry Level Machine with BIG machine features 22 Wheel capacity Adjustable Jaw Slides
More informationTyre Service. Heavy duty wheel service
Tyre Service Heavy duty wheel service Tyre changers and wheel balancers for all commercial vehicles The right equipment for your workshop needs Tyre Changers Truck Light Agricultural Vehicles Heavy Duty
More informationValve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm
Valve Lapping Tool Attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8 mm shank - working speed min. 1000 rpm, max. 1250 rpm - 2
More informationWheel Balancers - Tire Changers - Wheel Alignment
Wheel Balancers Tire Changers Wheel Alignment WHEEL BALANCERS CAR AND MOTORCYCLE WHEEL BALANCERS WHEEL BALANCERS CAR AND MOTORCYCLE WHEEL BALANCERS MSRP Digital Wheel Balancer for Motorcycles and Scooters.
More informationTCX57 & TCX56 Advanced Conventional Tire Changing Systems
TCX57 & TCX56 Advanced Conventional Tire Changing Systems Key features at a glance Bead Press System Tremendous power and control Aids mounting and demounting Auto-centering simplifies operation Swing-Arm
More informationART320 DTM185 DTM190 DTM195 ACCESSORIES
PRODUCT GUIDE 2010 TYRE CHANGERS TYRE CHANGERS & ACCESSORIES ART320 DTM185 DTM190 DTM195 ACCESSORIES FULLY AUTOMATIC TYRE MACHINE Capacity from 10-20 wheels clamped on the outside and 12-23 for wheels
More informationAuto34S Tire Changer Simple operation and unmatched capability
Auto34S Tire Changer Simple operation and unmatched capability Key features at a glance UPDATED Push-Button Controls Simple, three-button control Easiest operation in its class NEW Memory Function Returns
More informationThe Coats X-Series The Power of Choice
The Coats X-Series The Power of Choice Coats has been the leader in tire service equipment for over 50 years. And the Coats Rim Clamp tire changer has become the industry standard due to its legacy of
More informationFREE DELIVERY ON ALL ORDERS OVER 25 * GARAGE EQUIPMENT CATALOGUE STARTER PACKS FROM ONLY ORDER NOW BY PHONE OR ONLINE.
FREE DELIVERY ON ALL ORDERS OVER 25 * GARAGE EQUIPMENT CATALOGUE STARTER PACKS FROM 1999 ORDER NOW BY PHONE OR ONLINE 0161 476 0900 www.clampcouk.co.uk Platinum TC3301 Tyre Changer The Platinum TC3301
More informationINTRODUCTION. Call us now
INTRODUCTION T Y R E C H A N G E R S Today s tyre market presents many challenges, including; run-flat systems, low profile tyres and increasing diameter sizes. Our tyre changers are famous worldwide for
More informationRevolution WalkAway Operation Adds Capacity. Tire Changer NEW MORE AUTONOMOUS FEATURES
Revolution WalkAway Operation Adds Capacity Tire Changer NEW MORE AUTONOMOUS FEATURES Key features at a glance PATENT PENDING WalkAway Operation NEW 80-second unattended bead breaking and demounting process
More informationS 228 PRO DUO L-N-L. Giuliano Industrial S.p.A.
Racing Super-Automatic Lever - No Lever Tilt Back Tyre Changer with combined two Assist Arms Racing super-automatic lever - no lever tilt back tyre changer for tyres with rim from 10" to 28". Two integrated
More informationTyre Changers. Series T1300, T5300, T5320, T5340, T5540, T7300. The innovative tyre changer range ideal for the workshop and tyre service
Tyre Changers Series T1300, T5300, T5320, T5340, T5540, T7300 The innovative tyre changer range ideal for the workshop and tyre service PROspeed The innovative technology patent protected that optimises
More informationa measurable difference...
This testing machine with integrated steel plate welded frame structure, using single boom and double-function piston liner to load testing force and fixing specimen with cylindrical pin, load cell measuring
More informationS 228. Giuliano Industrial
Racing Super-Automatic Tilt Back Tyre Fitting Machine Racing super-automatic tilt back tyre fitting machine for tyres with rim from 10" to 28" (max. tyre diameter 1100 mm./43", max. tyre width 415mm./16").
More informationTHE COMPLETE SERIES OF JOHN BEAN TYRE CHANGERS
TYRE CHANGERS THE COMPLETE SERIES OF JOHN BEAN TYRE CHANGERS The innovative tyre changer range ideal for the workshop and tyre service SERIES T1300, T5300, T5320 T5340, T5540, T7300 PROspeed The innovative
More informationS U N D I A G N O S T I C S
P R O D U C T R A N G E T H E S TA N D A R D I N I N F O R M AT I O N, E Q U I P M E N T A N D D I A G N O S T I C S S Y S T E M S L I F T S LIFTS Snap-on offer a wide range of lifts that include many
More informationS 116. Giuliano Industrial S.p.A.
Semi-automatic swing arm tyre changer Semi-automatic swing arm tyre changer for wheels with rim from 10" to 24" (max. tyre diameter 1100 mm./43", max. tyre width 330mm./13"). Suggested for low-mid volume
More information30 center post tyre changer G-Frame rigidity Simple and reliable Side Lift NG Tyre leverless system Ergo Control Helper Device FALCO EVO 630
30 center post tyre changer G-Frame rigidity Simple and reliable Side Lift NG Tyre leverless system Ergo Control Helper Device FALCO EVO 630 Best in class for tyre specialists Product at a glance Tyre
More informationBest in class for tyre specialists TCE 4490/4495
Best in class for tyre specialists TCE 4490/4495 1 Product at a glance Tyre leverless system (TLL) Without any efforts Easy access of the tool Perfect bead extraction Side storage Storage for tools, valves...
More informationNTB-550 Manual. Contents
1 NTB-550 Manual Please read this Manual before using the Machine. You will need to know the safety instructions, System Settings, Wheel Parameters Input and Calibration process before you can properly
More informationRevolution Fully Automatic and Easy-to-Use. Tire Changer NEW!
Revolution Fully Automatic and Easy-to-Use Tire Changer NEW! Key features at a glance Fully Automatic 4 Same procedure for all tires and wheels 4 Operator experience no longer a factor Leverless Tool Head
More informationGLO-502/530 (RIM CLAMP TIRE CHANGER)
GLO-502/530 (RIM CLAMP TIRE CHANGER) OPERATION MANUAL DATE INSTALLED: SERIAL # MANUFACTURING DATE: (EAGLE - GLOBAL : NHT) TABLE OF CONTENT INTRODUCTION -------------------------------------------------------------------------------2
More informationL441/ L444 Four-Post Lift
TCX53 Performance Tire Changer L441/ L444 Four-Post Lift Conventional Tire Changer with Bead Press System Key features of the TCX51 Tire Changer Heavyweight 4 Heaviest model in its class 4 Long service
More informationTYRE CHANGERS TYRE CHANGERS MONTY
TYRE CHANGERS TYRE CHANGERS MONTY TYRE CHANGERS The innovative technology patent t protected that optimises the torque applied to the wheel and automatically sets the maximum rotation speed of the wheel
More informationgeodyna & WHEEL BALANCERS
geodyna & WHEEL BALANCERS montytyre CHANGERS excellence in wheel service For performance that never falters Built on a strong foundation of German engineering, HOFMANN has been providing leading-edge technology
More informationHYMAX Inground In-ground lift
HYMAX Inground Your workshop in an attractive appearance with 1-piston for washing bay 2-piston lift with lifting arms, lifting platform and runways up to 8t with two different installation variations
More informationVOLUME 3.2 2 This page intentionally left blank JTC 760 Operator s Manual PAGE 3 Table of Contents 1 Summary 1.1 Technical Data 4 1.2 Range of Application 4 1.3 Intended Use 5 1.4 Safety Precaution 5 2
More informationAUTOMOTIVE GARAGE EQUIPMENT
AUTOMOTIVE GARAGE EQUIPMENT KWA-300 3D technology wheel aligner for car LAUNCH The 3D Wheel Aligner with 4 digital cameras, targets without on-board electronic and premium PC with Windows XP operation
More informationAuto34S Tire Changer Simple operation and unmatched capability NEW!
Auto34S Tire Changer Simple operation and unmatched capability Key features at a glance Push-Button Controls Simple, three-button control Easiest operation in its class Memory Function Returns mount head
More informationWhat's Inside A Ranger NextGen Tire Changer
What's Inside A Ranger NextGen Tire Changer NextGen tire changers feature high-torque electric turntable drives. Increased speed and reversible direction for quicker tire removal and installation. The
More informationHandling of UHP and Run Flat Tires. A challenge for the aftermarket. Bernhard Hoffmann Business Unit Manager Wheel Service.
Handling of UHP and Run Flat Tires A challenge for the aftermarket Bernhard Hoffmann Business Unit Manager Wheel Service Made in Germany AGENDA Mounting & Demounting of UHP and RunFlat Tyres - Issues experienced
More informationLifts. Beissbarth. Vehicle Lifts. The perfect measurement station. Ideal for customer reception areas. Practical for quick tyre service
Lifts Beissbarth Vehicle Lifts The perfect measurement station Ideal for customer reception areas Practical for quick tyre service Wheel Alignment Brake Testers Vehicle Testing The Beissbarth v 2-post
More informationTCX57 & TCX56. Advanced Conventional Tire Changing Systems NEW!
TCX57 & TCX56 Advanced Conventional Tire Changing Systems NEW! Key features at a glance Bead Press System 4 Tremendous power and control 4 Aids mounting and demounting 4 Auto-centering simplifies operation
More informationTyre Changers. Tyre Changers Certified by wdk
Tyre Changers Certified by wdk Tested T500 and T1000-20 Recommended for service stations and garages with low to medium tyre service volume T500: The strong and rugged design of all components ensures
More informationS 226 PRO. Giuliano Industrial S.p.A.
Automatic tilt back tyre changer with dual assist arm Automatic tilt back tyre changer with dual assist arm for tyres with rim from 10" to 24" (max. wheel diameter 1100 mm./43", max. wheel width 390mm./15").
More information355 Deepali, Pitampura, Delhi Deepali, Pitampura, Delhi- 1 Tel.: 01
500mm ADIUM ME VAN CHRO TYRE SERVICE TOOLS Sarveshwari Engineers 355 Deepali, Pitampura, Delhi- 0034 Tel.: 0-27023750, 0-2702499, Fax: 0-2702629 Website : / Email : info@sarveshwari.com 220057 2 220067
More informationINSTALLATION, OPERATION, MAINTENANCE MANUAL KEEP THE MANUAL NEAR THE MACHINE ALL TIME AND MAKE SURE ALL USERS HAVE READ THIS WHEEL BALANCER
INSTALLATION, OPERATION, MAINTENANCE MANUAL KEEP THE MANUAL NEAR THE MACHINE ALL TIME AND MAKE SURE ALL USERS HAVE READ THIS WHEEL BALANCER FOLLOW THE INSTRUCTIONS CAREFULLY TO GRANT THE MACHINE A CORRECT
More informationINDEX. -"Leva la Leva" car tyre changers "Traditional" car tyre changers Wheel balancers Wheel alignments...
Catalogue 02-2018 INDEX PAGE TYRE CHANGERS -"Leva la Leva" car tyre changers.............................................. 4 -"Traditional" car tyre changers................................................
More informationIntroducing the GAME-CHANGER in IC to Electric Conversions SERIES A80600X A80900X A100X
Introducing the GAME-CHANGER in IC to Electric Conversions SERIES A80600X A80900X A100X The A series [A80X, A80/900X, A100X] is the ultimate expression of technological research developed by the Carer
More informationQueen. Giuliano Industrial S.p.A.
Super-Automatic no contact robotic tire changer Super automatic no contact (without use of bead lifting lever) robotic tire changer suitable for fitting/removing all kinds of passenger car and LCV tires
More informationS 551 XL. Giuliano Industrial S.p.A.
Heavy duty tyre changer suitable for truck, bus and agriculture tyres, 14"-46"/58" Heavy duty tyre changer for truck, bus and agriculture tyres with 14"-46"/58" rim (max. tyre diameter 2300 mm./90,5",
More informationWORKSHOP EQUIPMENT. Tyre changers Recommended by Volkswagen AG
WORKSHOP EQUIPMENT Tyre changers VAS 6313-C and VAS 6314-C wdk-certified Tyre changer VAS 6313-C Certified by wdk for handling of UHP and run-flat tyres. With pneumatic mounting tool VAS 6312-1 and kit
More informationHIGH-SPEED TIRE (TUBELESS TIRE)
20 HIGH-SPEED TIRE (TUBELESS TIRE) HIGH-SPEED TIRE CONSTRUCTION & FEATURES ------------ 20-2 HIGH-SPEED TIRE MAINTENANCE PRECAUTIONS ----------- 20-4 HIGH-SPEED TIRE REMOVAL/INSTALLATION ----------------
More informationSX 234. Giuliano Industrial S.p.A.
High Performance Super Automatic Tilt Back Tyre Changer with Dual Assist Arm Super-automatic tilt back tyre changer for tyres with rim from 10" to 28" (max. wheel diameter 1120 mm./44", max. wheel width
More informationDie cutting and creasing machine with blanking and stripping device. model Brausse 1060ER
Die cutting and creasing machine with blanking and stripping device model Brausse 1060ER 1 Highlights of all Brausse machines Very complete configuration Extremely smoothly running due to the unique index
More informationAUTOMATIC demounting cycle
Innovative WIThout LEVER - TOUCHLESS hydraulically operated super-automatic tyre changer with wheel diameter selection. Can handle all types of wheels from 13 to 32. AUTOMATIC demounting cycle with the
More informationUNI LIFT. Scissors Lifts UNI LIFT NT UNI LIFT CLT. UNI LIFT Quick Test Quattro. Made in Germany
UNI LIFT Scissors Lifts UNI LIFT NT UNI LIFT CLT UNI LIFT Quick Test Quattro Made in Germany UNI LIFT The specialists 1 The hydraulic scissors lifts of the UNI LIFT Series are the perfect solution for
More information180 PRO3DAUTO 3DTECHNOLOGY EQUIPPED WITH AUTOMATIC WHEEL DIMENSION SONAR AND LASER RIM PROFILE SCANNER ELECTRONIC WHEEL BALANCERS WITH MICROPROCESSOR
WHEEL BALANCERS 180 PRO3DAUTO EQUIPPED WITH AUTOMATIC WHEEL DIMENSION SONAR AND LASER RIM PROFILE SCANNER 3DTECHNOLOGY ELECTRONIC WHEEL BALANCERS WITH MICROPROCESSOR AUTOMATIC BALANCING MODE Perfect balancing
More informationTire Changer Information
monty TIRE CHANGERS Tire Changer Information Model Number: Serial Number: Purchase Date: Sales Representative: Model Number: Serial Number: Purchase Date: Sales Representative: Model Number: Serial Number:
More informationTyre Changer Price List No. 1 NHT810 Semi-Automatic Motorcycle Tyre Changer Price: 638 + VAT Rim Clamping From Outside: 150mm-535mm (6-21 ) Max Tyre Diameter: 940mm (37 ) Max Tyre Width: 255mm (10 ) Force
More informationTCA34 Series Tire Changer
OPERATION INSTRUCTIONS Form 5734-T, 07-10d TCA34 Series Tire Changer Copyright 2008-2011 Hunter Engineering Company OWNER INFORMATION Model Number Serial Number Date Installed Service and Parts Representative
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationTire Changer Accessories
Tire Changer Accessories Revolution accessories The standard Revolution tire changer comes equipped to handle virtually all tire and wheel combinations. A RP6-3784 Paste RP6-1506 Paste brush C 69-1394-2
More informationMINI-EXCAVATOR. ViO57U. 5325/5395 kg. Call for Yanmar solutions
MINI-EXCAVATOR 5325/5395 kg Call for Yanmar solutions COMPACTNESS The is a true Zero Tail Swing machine: neither the counterweight nor the front part of the upper frame exceed the width of the crawlers.
More information**Detailed instructions for balancing aluminum wheels in Section 15 of manual.
PWB-1530 Manual Please read this Manual before using the Machine. You will need to know the safety instructions, System Settings, Wheel Parameters Input and Calibration process before you can properly
More informationAutomotive lifts from Bosch Reaching new heights
Automotive lifts from Bosch Reaching new heights For each workshop type: The new automotive lifts from Bosch Electromechanical 2-post lifts VLE 2130 VLE 2130F VLE 2130E VLE 2130EL VLE 2140EL Electrohydraulic
More informationDie cutting and stripping machine with hot foil stamping. model Brausse SIGNA 1050F Hybrid
Die cutting and stripping machine with hot foil stamping model Brausse SIGNA 1050F Hybrid All machines installed by Brausse Europe will have the VinTechMa label. www.vintechma.com 1 Highlights of all Brausse
More informationVOLUME 2.0 2 This page intentionally left blank JWB 100 Operator s Manual page 3 Table of Contents 1 Summary 1.1 Features 4 1.2 Specifications 4 2 Installation 2.1 Installation 5 3 Structure 3.1 Main Structure
More informationCorrugated paper: 4mm. Max punching speed: 7500 sheets/hour Max stripping speed: 6500 sheets/hour
Commodity name: HIGH ABILITY FULLY AUTOMATIC DIE-CUTTING MACHINE (Paper feeder, die-cutting unit, waste removal unit, delivery station, and electrical section) Model: CM-1050-SE Specifications: Max paper
More informationAUTOMOTIVE WORKSHOP EQUIPMENT & FITOUT SPECIALS
1ST MAY 2018-31ST AUGUST 20I8 AUTOMOTIVE WORKSHOP EQUIPMENT & FITOUT SPECIALS AA404PA-WF Alemlube 4.0t Wheel Alignment Hoist with Jacking Beams Lifting capacity of 4,000kg Lifting height of 1,800mm (hoist),
More informationTIRE CHANGER SALES GUIDE
TIRE CHANGER SALES GUIDE RASE.2124, RASE.TOP.2146-2148 2148 STRONG POINTS HEAD 1. Contemporary locking in both positions height and lateral distance. 2. Plastic protections alloy rim protection. 3. Mounting
More informationOwners Manual POWER PLUS MOBILITY OUR PRODUCTS WILL MOVE YOU
Owners Manual POWER PLUS MOBILITY OUR PRODUCTS WILL MOVE YOU At Power Plus Mobility, we care! Thank you for choosing a wheelchair from Power Plus Mobility Inc. We are always improving in our ways to serve
More information9010 A/E. Rim Clamp Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
9010 A/E Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies s Identification READ these instructions before placing unit in service KEEP these and other
More informationS 558. Giuliano Industrial S.p.A.
Super-automatic Heavy Duty Truck Tyre Changer 12" - 46"/58" (1) Super-automatic tyre changer suitable for truck and heavy duty tyres with 12" - 46"/58" rim (max. wheel diameter 2500 mm./98", max. wheel
More informationNTB-800 Manual. Contents
NTB-800 Manual Please read this Manual before using the Machine. You will need to know the safety instructions, System Settings, Wheel Parameters Input and Calibration process before you can properly balance
More informationMOBILE CRANE BRANCH OF ZOOMLION GROUP
QUY70 SPECIFICATIONS MOBILE CRANE BRANCH OF ZOOMLION GROUP -1 - Content 1. Overall dimensions and main specifications 1.1 Overall dimensions and working weight of main machine with basic boom 1.2 Overall
More informationS 226. Giuliano Industrial S.p.A.
Automatic Tilt Back Tire Changing Machine Automatic tilt back tire changing machine for wheels with rim from 10" to 24" (max. wheel diameter 1100 mm./43", max. wheel width 390mm./15"). Suggested for garages
More informationEHP Series High-Performance Tire Changers
Maximum Versatility for Today s and Tomorrow s Wheels TM TM Increase Productivity With John Bean Tire Changers! John Bean s Tire Changers are the answer to the latest needs of the modern tire service center.
More informationDistributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
More informationINTEGRATED MARKETING (PTY) LTD
INTEGRATED MARKETING (PTY) LTD 13 Isando Road, Isando. Tel: (011) 974-2202/3 We focus on bringing innovative equipment for professional usage while pricing remains attractive. Together with our loyal customers,
More informationXBoss. Giuliano Industrial S.p.A.
Super-automatic touchless leverless tyre changer Super-automatic touchless leverless tyre changer suitable for fitting/removing all kinds of passenger car and LCV tyres from 12" to 30" (max. wheel diam.
More informationWESCO INDUSTRIAL PRODUCTS, INC. Deluxe Foot Pump Fork Pallet Truck. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Deluxe Foot Pump Fork Pallet Truck Part Number: 272766 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. TABLE OF
More informationRevolution. Tire Changer Fully Automatic and Easy-to-Use NEW!
Revolution Tire Changer L441/ L444 Four-Post Lift Fully Automatic and Easy-to-Use NEW! Key features at a glance Fully Automatic Same procedure for all tires and wheels Operator experience no longer a factor
More informationwww.kuhlmeyer.de PORTAL-BELT-GRINDING MACHINE TYPE PBM with a right and a left machine stand equipped with adjustable hollow screws M30 for the tightening on the ground each stand with a vertical support
More informationLIFT PLATFORM PRODUCT LIST
LIFT PLATFORM PRODUCT LIST HENAN DAFANG MACHINERY CO., LTD. CONTENT ABOUT 01 Mobile Hydraulic Scissor Lift Platform 02 Products Description 02 Products Type 0 Detailed Specifications 04 Parts Details 05
More informationRevolution Fully Automatic and Easy-to-Use. Tire Changer NEW!
Revolution Fully Automatic and Easy-to-Use Tire Changer NEW! Key features at a glance Fully Automatic Same procedure for all tires and wheels Operator experience no longer a factor Leverless Tool Head
More informationSHANGHAI DESIRABLE MACHINERY CO.,LTD.
SHANGHAI DESIRABLE MACHINERY CO.,LTD. ATLAS COPCO BOLAITE AIR COMPRESSOR Bolaite Air Compressor High efficiency, Energy saving, Environment-friendly, Exquisite Bolaite-Simply Your Best Choice! Bolaite(Shanghai)air
More information