HK Equipment CZD Brake tester Max. weight Size Roller size Measure range Error Rated use condition: CCH Sideslip tester 10,000kg (15,000kg) 3990 x 840

Transcription

1 UTOMOTIVE GRGE EQUIPMENT TIR SYSTEM110 Brake tester HP pply car kind Roller unit vailable with power rating Speed Max. load capacity Max. effect Precision Roller (D x L mm) 1 HP 1022 Sideslip tester 4WD, light truck, heavy truck and bus twin roller bed 2 x 11 kw(400v/50hz/3p) 2.0 km/h 20,000kg 4000 dan 0.5 % 250 x 1070 mm Power supply Measurement scale Resolution Digital indicator Max. sliding plate load Plate dimensions (xbxh) 1 ph V - 50 Hz m/kmm 0,2 m/km 3 cifre 8 Ton 800x1006x47 mm LOOK OPT Head light tester HP Electronic Equipment to check and adjust head lights of passenger cars. Complete Check up of all Vehicle Head Lights vailable in two versions: with laser alignment (LS) or optical alignment (OPT) Two versions: on wheels or on rail Turning column with pedal to help the alignment of the optical camera with the vehicle axis Very user friendly Digital illuminometer with graduated scale either in Klux and candles Pre-set for remote connection by means of RS 232. Lens made of optical glass utomatic switch off. vailable in 12 languages. Repeatability guaranteed Electronic recognition of the light beam utomatic Help to adjustment and check up of the projector. Extra light adjustment of the optical camera. Laser alignment of the projector Complying with the Standard ISO *Prices and specifications are subject to change without prior notice.

2 HK Equipment CZD Brake tester Max. weight Size Roller size Measure range Error Rated use condition: CCH Sideslip tester 10,000kg (15,000kg) 3990 x 840 x 635mm 195 x 300mmm 0 ~ 30000N (45000N) ±3% - Temperature: 20 C ~ +50 C - Relative humidity: 85% - Power: C380V - Power range: -15% ~ +10% Max. weight Size Platform size Measure range Error Rated use condition CSD-10 Speedometer Tester 10,000kg (15,000kg) 3030 x 606 x 157mm 0.5m or 1m ~ 10.0m/km ±0.2m/km - Temperature: -20 C ~ +50 C - Relative humidity: 85% - Power: C220V - Power range: -15% ~ +10% Roller diameter: ø177 Space between roller: 453mm Balance precision: G6.3 Range of track width: 570 ~ 2700mm Range of speed: 0 ~ 120km/h Resolution: 0.1m/Km Measure error: ±3% CXX-166 Suspension Tester Range of track width: 570 ~ 2700mm Exciting frequency: >15Hz mplitude: 5mm Motor power: 2 x 1.1kw Noise level: <70db Wheel load indication error: ±2% bsorptive repeatability error: ±2% Bias absorptive error: ±2% Vibrating plate size: 700 x 320(LxW) *Prices and specifications are subject to change without prior notice. 57

3 UTOMOTIVE GRGE EQUIPMENT Q QDC-1C Headlight Tester Features: - Having a function of measuring the high-light and low-light, adopt a function of gathering and processing advanced DSP image. ccording to the national standard, can carry out the measurement of the brightness scattering and assembling direction. Double CCD technologies, can measure and adjust independently the lamp of motor vehicle. System which can search light through multi-dot way and especial quomodo which can search light through CCD ensure the lamp light checks speed and veracity. Double system of orientation, eliminates interference from t heterogeneous lights. Display with high-luminance system. The repertoire connecting with networked provides rich, reliable communication software instruction. Working environment - Temperature: -5 ~40 - Relative humidity: 85% Voltage supply: C220V± 22V, 50 Hz±1H DSP image acquisition and analysis Luminous intensity indication error: ±10% % Luminous intensity : 0~120000cd Optical axis offset: - Vertical: up 40cm/10m ~ down 56cm/ /10m - Horizontal: left 56cm/10m ~ right 56cm/10m Optical axis offset of high/ low beam indication error: ±12 Headlight height survey range:400mm ~ 1300mm Lamp height accuracy: ±10mm Test distance: 1000m±10mm Guide rail length: 5m Power: 300w Weight: 120kg H HY-104 Digital sound level meter Measurement range: 30dB ~ 140dB Resolution: 0.1dB Sample rate: 1±0.02s Power: <14m 58 *Prices and specifications are subject to change without prior notice.

4 DF2IS / DF2FS / DF4IS / DF4FS DYNORCE Power bench tester VMG Power Test Bench 2/4WD version with/out eddy current brake system. HK Equipment Features: Dynamometer with eddy-current brake It's a computerized diagnostic system for the measurement of the torque and the power performed by a vehicle in running order. Indispensable to check and analyze the performance parameters of two or four wheel drive cars & light vehicle (also electronically controlled). Detector data: Maximum power at the wheel and related graphic representation Maximum power at the engine and related graphic representation Torque to the wheel and engine and trend chart Simulation at constant RPM Simulation at constant speed Simulation on constant traction Measure of the discrepancy of speedometer Road simulation Technical specification: - Maximum power per axis: 300KW Maximum speed: 300Km/h Maximum torque per axis: 750/1500Nm Traction force per axis: 7.5KN Rollers diameter: 318mm Wheel base: 2 -> 3m Useful track: 0.9 -> 2.1m Total weight per axis: 1,100Kg Mechanical connection of the axis: Optional Variable speed of the fan: Optional Locking roller and lift: Si Electrical power absorbed: 6KW Minimum hardware requirements: - Processor Intel Pentium 2000MHz Ram 1Gb 2000/XP - 2Gb Vista Video card Svga 1024x Mb Hard Disk 60Gb CD-Rom 32x 4 USB 2.0 port Operating system Windows 2000/XP/Vista *Prices and specifications are subject to change without prior notice. 59

5 UTOMOTIVE GRGE EQUIPMENT P440 / P420 Chassis dynamometer HP 4WD and 2WD passenger cars power absorber dynamometer with eddy- current brake. Features: Dynamometer with eddy-current brake. In addition to power measures of inertial dynamometer, the brake allows ECU mapping, engine break-in and several realroad driving simulations as variable load test, air drag & rolling friction simulation, and steady load test, slope & trailer towing simulation. Large diameter knurled rollers which allow high-speed tests up to 300 km/h. Pneumatic lifter for easy roller entrance/exit of vehicles. Electrically adjustable wheelbase system for 4WD vehicle, directly from the control panel. Vehicle tachometer test with preset speed. PC-based control unit. Windows-based software: - Data acquisition for engine temperature, turbo-charger pressure, Lambda probe. - Normalized power diagram, torque and speed. - Customised graphics for all measured data. - Tests with variable-step of load and speed for a complete afterrepair engine diagnosis. Centrifugal cooling fan, m³/h at 90 km/ /h, with manual and automatic start both from the control panel and the remote control. Essential for vehicle safety. Upgrade kit to 4WD power absorber model (suitable for P 420). Power supply - to PC and control unit - to the motors Max. engine power Vehicles Max. speed Track Minimum wheel diameter Roller diameter Testing axle max. load capacity IR remote control Dimensions (LxPxH) Noise level in working 1 ph - 115/230 V - 50 Hz 3 ph - 230/400 V - 50 Hz 1000 HP (P440) HP (P420) 4WD (P440) - 2WD (P420) 300 Km/h mm 10" 318 mm 2500 kg as standard 5300x3150x400 mm (P440) 890x3150x380 mm (P420) < 70 db () 60 *Prices and specifications are subject to change without prior notice.