Guaranteed Technical Particulars(GTP) Deviation/Remarks Specify if any. Computerized Motor testing system suitable to test LV 3 phase motors
|
|
- Milton Hawkins
- 5 years ago
- Views:
Transcription
1 Section II - Technical Specification Tender Enquiry No: BUY/EATD(BEE)-01/12-13 Name of the Equipment: MOTOR TESTING SYSTEM Note: The Offers should be submitted only in this format otherwise the offer will be liable for rejection Name of the Vendor Offer Number and Date Specification for Moter Testing System PARTICULARS Computerized Motor testing system suitable to test LV 3 phase motors QUANTITY Guaranteed Technical Particulars(GTP) Deviation/Remarks Specify if any 1 Suitable to conduct Type test of the motors as per IS : 325, IEC : , IS :2011, IS &IEEE:112 Standards System should be with three test beds with one common Data acquisition panel. 2 System should be operated by computer using customized software built using Labview. Complete system should be inclusive of the following Test Beds: o Test Bed 1 : kw ( Frame sizes) o Test Bed 2 : kw ( Frame sizes) 3 o Test Bed 3 : kw ( Frame sizes) 4 5 Data Acquisition Panel mounted with DAQ Cards with software drivers required to operate
2 6 Fitted with Computer on Vertical cabinet and UPS, Printer, Data acquisition cards. Accessories, Electrical Display units, Torque Speed power display unit, Power analyzer etc. Control panel mounted with Electrical Power Analyzer Frequency convertor Servo voltage stabilizer : 7 Variable voltage transformer ( variable )( automated) A Each Test Beds should comprise of : Test Bed 1 ( kw) ( Frame sizes) should consist of: o Torsion Rigid fabricated structure. o Safety mesh to cover rotating parts. o Hollow Reaction Torque Sensor range Nm with an accuracy of 0.05% FSD or better. with dual range (0 0.5 Nm)& ( Nm) calibration of the torque sensor with NABL accredited calibration certificate or equivalent internationally approved calibration certificate like PTB
3 o Single axis table to guide the centre shaft of motor with 0 250mm stroke. o Pneumatic brakes. o Torsion Rigid Disc type coupling o Magnetic type speed sensor. o 2 KW Servo motor with drive for loading. Control panel o Vertical cabinet to mount electrical accessories o Current Transformers of 5A, Accuracy of 0.1 Class B o Power Contactors of 5A. 6Nos Test Bed 2 ( kw) ( Frame sizes)) should consist of: Control panel o Reaction Torque Bench Sensor of range 5 50 Nm with an accuracy of ± 0.05%FSD or better. with dual range (0 5Nm ) ( 5 50 Nm) calibration of the sensor with NABL accredited calibration certificate or equivalent internationally approved calibration certificate like PTB o safety mesh to cover rotating part o Single axis table to guide the centre shaft of motor with 0 250mm stroke o Pneumatic brakes. o Torsion Rigid Disc type coupling. o Magnetic type speed sensor. o AC Induction Motor of 5.5kW capacity for loading purpose. o Vertical cabinet to mount electrical accessories s
4 o Current Transformers of 20A, Accuracy of 0.1 Class o Power Contactors of 20A. 6Nos C o 5.5 KW regenerative AC Drive Test Bed 3 ( kw ( Frame sizes)) should consist of: o Reaction Torque Bench Sensor range Nm with an accuracy of 0.05% FSD or better. with dual range ( 0 20 Nm) ( Nm) calibration of the sensor with NABL accredited calibration certificate or equivalent internationally approved calibration certificate like PTB o safety mesh to cover rotating part o Single axis table to guide the centre shaft of motor with 0 250mm stroke o Pneumatic brakes o Torsion Rigid Disc type coupling o Magnetic type speed sensor o AC Induction Motor of 22kW capacity used for loading Control Panel : o Vertical cabinet to mount electrical accessories o Current Transformers of 100A,Accuracy of 0.1 Class o Power Contactors of 100A 6Nos 8 o 22KW regenerative AC Drive Data Acquistion panel should contain: o Computer
5 Intel i3 or better, 19 TFT with LCD screen, 320GB HD, 2 GB Ram,3.2 GHz, 4 usb port, Key board, DVD Writer, Mouse with Windows 7 operating system. o Laser Printer for A4 size paper printing o UPS with 20 mins backup for computer. o Data acquisition card(usb): 32 analog inputs, 500 ks/s, 16-bit resolution, ±10 V Four analog outputs, 900 ks/s, 16-bit resolution, ±10 V 48 digital I/O lines (32 hardware-timed up to 1 MHz) Four 32-bit counter/timers for PWM, encoder, frequency, event counting, and more Support for Windows 7/Vista/XP 9 The system should be on an Open Platform approach easily configurable software facility. Torque-Speed-Output Power Display unit. Resistance meter Software : Related hardware must be easily available as replacement component/24 hour turn around service and replacement facility is a must. Should be built using lab view to cover all the test required as per above referred standards. 1COPY
6 Provision should be available for customizing the software to the requirement In No load and load test, the graph should start from zero speed and load further. Software should have dynamic display of graph during testing. Inertia compensation for the free speed and No Load test. Real Time data visualization of all the parameters during testing. 10 Facility to store the test results and retrieve the data with respect to date or unique serial numbers assigned Power Analyzer : Basic accuracy should be : ± 0.025% of FS. 11 With 10.4 TFT display of indicative, possibility for display of bar graph, numeric, wave form and vector Common Electrical instruments mounted in common control panel Vertical cabinet to mount electrical accessories Frequency convertor ( 50Hz to 60 Hz), 40 kva Servo voltage stabilizer : 40 kva. Motorized and automated Variable Voltage transformer 12 Voltage : 0 415V Current : 100 Amps. Operation of the equipment : 13 Equipment should have the provision to operate in both manual mode and computerized mode. * Power Source : 415 Volts, 50 Hz. Accuracy : Overall accuracy of measurement should be 0.25% of FSD for each Rating of the motor tested.
7 14 Different Test To be done using this system 1. Winding Resistance Test 2. No Load Test (Cold) 3. Reduced Voltage test 4. Locked Rotor test 5. Rotor Bar Angular test 6. Load test(cold) 7. Speed Torque Test 8. Heat Run test 9. Load test 10. Momentary over load test 11.No Load Test Terms of Supply General : a. The supplier shall have the experience of having supplied, installed and commissioned a minimum of 5 systems in India on variety of motor applications. b. The supplier shall have the experience of having supplied, installed and commissioned multi bed Motor testing capability with a single control panel in one single site and supported the system for a minimum of 3 years. c. Supplier should demonstrate the calibration of all the sensors used in the system at an NABL laboratory. d. All the sensors and display should be of easy detachable type which can be easily calibrated at respective calibration laboratory for periodic calibration. e. All the spares required to the equipment should be easily available in Bangalore in case of failure and replacement. f. Service Support : 24 hour service backup facility within India. Response to service calls shall be available within 24 hours. Training :
8 a. Training at manufacturing site and training at CPRI should be provided by the supplier as the part of the supply. Installation: a. Installation and commissioning should be done by the supplier Manual : Three sets of manual copy instruction manual to be provided which includes, wiring diagrams, equipment layout, spare parts list, operation instructions, maintenance instructions, troubleshoot and functional instruction. PDI : Will be done by CPRI at supplier works before dispatch. After written confirmation by the inspector equipment can be dispatched to CPRI as per PO terms. Criteria for Acceptance : Is based on two motors of each range will be tested on the equipment and results will be compared. PN : 1. A detailed technical catalogue/literature/phamplet and any other technical details shall be sent in hard copy in a sealed enquiry number and due date so as to reach the following address within the due date and time. This is very much essential to 2. Letter of authorization issued by the foreign Principal shall also be sent by the Indian agents who have offered on behalf of Address : Joint Director (Purchase) Central Power Research Institute, Sir C,V.Raman Road, P.B.No.8066, BANGALORE PH. No / Extn: 2271/2274. Fax :
Torsion testing machine
WTT Series Metal Wire Torsion Tester Application: WTT Series Metal Wire Torsion Tester is mainly used to test the plasticity of metal wires and ropes under torsion condition. Surface flaws of steel wires
More informationMDS-E/EH Series Drive Units
MDS-E/EH Series Drive Units MDS-E Series Drives and Motors MDS-E Series 1-Axis Servo Drive Unit Model Number V1-20 V1-40 V1-80 V1-160 V1-160W V1-320 V1-320W Stocked Item - - S S - - - Drive Unit Category
More informationWind Turbine Emulation Experiment
Wind Turbine Emulation Experiment Aim: Study of static and dynamic characteristics of wind turbine (WT) by emulating the wind turbine behavior by means of a separately-excited DC motor using LabVIEW and
More informationSALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS
SALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS Relay Test Bench: LIST OF TEST EQUIPMENT 1. FIVE STATION BIMETAL OVERLOAD RELAY TEST BENCH 2. TWENTY FOUR STATION RELAY HEATING
More informationNATIONAL CENTER FOR COMBUSTION RESEARCH AND DEVELOPMENT (NCCRD) INDIAN INSTITUTE OF TECHNOLOGY MADRAS CHENNAI , INDIA
Ref. No. ICS/11-12/013/DSTX/TSUN Date: 1 Sep. 2015 Due date: 22 Sep. 2015 Item name: COMBUSTION ANALYSIS SYSTEM 1. Quotations are invited in duplicate for the items shown overleaf (in Annexure I). The
More information1291BL Series Technical Specification Single Axis Position and Rate Table System
Datasheet 1291BL Series Technical Specification Single Axis Position and Rate Table System DESCRIPTION The Model 1291BL Single Axis Position and Rate Table System is designed to provide precise position,
More informationSHOCK ABSORBER/DAMPER TESTING MACHINE
SHOCK ABSORBER/DAMPER TESTING MACHINE Dampening force of a shock absorber is directly proportional to velocity and this parameter needs to be precisely controlled. A small variation of 1mm in a stroke
More informationCompression/Tension Testing Machines
Manual Cement Compression and Flexure Testing Machines UTCM-6310/UTCM-6410 The UTCM-6310 and UTCM-6410 single and double testing chamber Manual compression and flexure testing machines are designed to
More informationW SERIES IMPULSE VOLTAGE TEST SYSTEM APPLICATION FEATURES
W SERIES IMPULSE VOLTAGE TEST SYSTEM Impulse Voltage Test System is used to generate impulse voltages from 100 KV to 2400 KV simulating lightning strokes and switching surges with energies up to 240 KJ.
More informationMAGTROL. WB/PB 65 Series Eddy-Current and Powder Dynamometers. WB/PB 65 Data Sheet. Features. Description. Applications
MAGTROL Data Sheet Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum Torque from N m to 50 N m (7.3 lb ft to 36 lb ft) Braking Power:.5 kw to 2 kw Stable Braking Torque, without
More informationUNIVERSITY OF CALCUTTA Centre for Research in Nanoscience and Nanotechnology JD-2, Sector-III, Salt Lake City Kolkata
UNIVERSITY OF CALCUTTA Centre for Research in Nanoscience and Nanotechnology JD-2, Sector-III, Salt Lake City Kolkata- 700106 NOTICE INVITING QUOTATION Sealed Quotations are invited from reputed suppliers
More informationWB 23 & WB 27. High-Speed Eddy-Current Dynamometers WB 23 & WB 27. Features. Description. Operating principles
WB 23 & WB 27 High-Speed Eddy-Current Dynamometers Magtrol offers 3 types of dynamometer brakes to absorb load: Hysteresis, Eddy-Current and Magnetic Powder. Each type of Dynamometer has advantages and
More informationMAGTROL. WB/PB 2.7 Series Eddy-Current and Powder Dynamometers. WB/PB 2.7 Data Sheet. Features. Description. Applications
MAGTROL WB/PB 2.7 Data Sheet WB/PB 2.7 Series Eddy-Current and Powder Dynamometers Features 9 Models with Maximum Torque from 300 mn m to 2400 mn m (42 oz in to 340 oz in) Braking Power: 20 W to 1 kw Stable
More informationMAGTROL. WB/PB 115 Series Eddy-Current and Powder Dynamometers. WB/PB 115 Data Sheet. Features. Description. Applications
MAGTROL WB/PB 5 Data Sheet WB/PB 5 Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum from 50 N m to 200 N m (36 lb ft to 47 lb ft) Braking Power: 5 kw to 30 kw Stable Braking,
More informationINVITATION FOR QUOTATION. TEQIP-II/2015/GJ1G02/Shopping/M-EE-09
INVITATION FOR QUOTATION TEQIP-II/2015/GJ1G02/Shopping/M-EE-09 02-Dec-2015 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for
More informationCNC Tool Room Milling Center MODEL: VM-760
CNC Tool Room Milling Center MODEL: VM-760 MACHINE FEATURES 7.5HP high torque spindle motor, low noise and vibration BT40/CAT40/DIN40 6000 rpm spindle speed, ( Optional 8,000, 10,00, 12,000 or 15,000rpm
More informationii) PC based works station with monitor and printer having below mentioned specifications:
GAS CHROMATOGRAPH ANNEXURE-A Gas with TCD,FID & Methanizer as below for NFL Bhatinda, Panipat & Nangal Unit (one each): i)gas customized & factory fitted capable of concurrent (parallel) operations of
More informationMAGTROL. WB/PB 43 Series Eddy-Current and Powder Dynamometers. WB/PB 43 Data Sheet. Features. Description. Applications
Data Sheet Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum Torque from.5 N m to 0 N m (. lb ft to 7.3 lb ft) Braking Power: 0.5 kw to 3 kw Stable Braking Torque, without Shock
More informationLoad Test On 3 Phase Slip Ring Induction Motor Lab Manual
Load Test On 3 Phase Slip Ring Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase
More information1291BL Series Technical Specification Single-Axis Rate and Positioning Table System
Datasheet 1291BL Series Technical Specification Single-Axis Rate and Positioning Table System DESCRIPTION The Model 1291BL Single Axis Positioning and Rate Table System is designed to provide precise position,
More informationMAGTROL. WB 23 High-Speed Eddy-Current Dynamometer. WB 23 Data Sheet FEATURES DESCRIPTION COMPLETE PC CONTROL
MAGTROL Data Sheet High-Speed Eddy-Current Dynamometer FEATURES Torque: 80 mn m Speed: up to 100,000 rpm : 120 W continuous; 400 W intermittent Low inertia Very low residual torque Stable braking torque,
More informationDavid Meek. Engineering Director Intertek Transportation Technologies. Sponsors
David Meek Engineering Director Intertek Transportation Technologies Sponsors NEW DEVELOPMENTS IN HIGH VOLTAGE EV SYSTEMS TESTING Innovations in Testing and Data Acquisition Dave Meek Engineering Director
More informationMaryland Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kw to 10 MW or less)
Maryland Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kw to 10 MW or less) Interconnection Customer Contact Information Name: Address: Alternative Contact Information
More informationImpulse Voltage Test System, Q Structure, kV
TCDYQ Series Impulse Voltage Test System, Q Structure, 200-3600kV Applications: Shunt reactors Power transformers Distribution transformer Instrument transformers Cables (type tests) Bushings Arresters
More informationSP5 INSTALLATION AND SETUP MANUAL
SP5 INSTALLATION AND SETUP MANUAL 1 Installation 1.1 Introduction The SP5 System consists of a Data Acquisition unit (DAQ) with two complete Roller control channels, each Roller Control Channel consists
More informationTECHNICAL SPECIFICATIONS
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. SARADAR PATEL VIDYUT BHAVAN, RACE COURSE, BARODA 390 007. TECHNICAL SPECIFICATIONS FOR SELECTIVE LEVEL METER GETCO/E/TS- PACC SLM 03504/R0, Dt: 2.04.2008 Page
More informationMedium voltage drive for single or multimotor applications, 3 27 MW
MV Drives, ATD, October 2009 ACS 6000 Medium voltage drive for single or multimotor applications, 3 27 MW September 19, 2012 Slide 1 Features and benefits Modular drive for single or multi-motor applications,
More informationSupply, testing, installation and commissioning of 5 ky A UPS system as per the following specification:
Supply, testing, installation and commissioning of 5 ky A UPS system as per the following specification: 1 Capacity 5 ky A UPS system with APFC system 2 Input supply Suitable for400±15% Y, 3 phase, 50
More informationNLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX
NLC INDIA LIMITED (formerly Neyveli Lignite Corporation Limited) ('NAVARATNA'-Government of India Enterprise) MATERIALS MANAGEMENT COMPLEX Dr. Rajendra Prasad Road,Block-27,Neyveli-607807.Tamilnadu,India.
More informationMicro Dyne Motor Testing System
Data Sheet Motor Testing System Features designed specifically for miniature and micro s Torque: Easily convertible from 2.0 mn m to 4.0 mn m (0.28 oz in to 0.57 oz in) Speed: up to 100,000 rpm Power:
More informationMAGTROL. WB/PB 2.7 Series Eddy-Current and Powder Dynamometers. WB/PB 2.7 Data Sheet FEATURES DESCRIPTION MOTOR TESTING SYSTEMS APPLICATIONS
MAGTROL WB/PB 2.7 Data Sheet WB/PB 2.7 Series Eddy-Current and Powder Dynamometers FEATURES Models with Maximum Torque from 150 mn m to 2400 mn m (21 oz in to 340 oz in) Braking Power: 20 W to 1 kw Stable
More informationLinear Induction Motor (LIMO) Modular Test Bed for Various Applications
Linear Induction Motor (LIMO) Modular Test Bed for Various Applications University of Connecticut Department of Electrical and Computer Engineering Advanced Power Electronics and Electric Drives Lab (APEDL)
More informationHK Equipment CZD Brake tester Max. weight Size Roller size Measure range Error Rated use condition: CCH Sideslip tester 10,000kg (15,000kg) 3990 x 840
UTOMOTIVE GRGE EQUIPMENT TIR SYSTEM110 Brake tester HP pply car kind Roller unit vailable with power rating Speed Max. load capacity Max. effect Precision Roller (D x L mm) 1 HP 1022 Sideslip tester 4WD,
More informationMicro Dyne Motor Testing System
Data Sheet Motor Testing System FEATURES DESIGNED SPECIFICALLY for miniature and micro s Torque: Easily convertible from 2.0 mn m to 4.0 mn m (0.28 oz in to 0.57 oz in) Speed: up to 100,000 rpm Power:
More informationINSTITUTE FOR PLASMA RESEARCH. An Aided Institute of Department of Atomic Energy, Government of India
ल म अन स ध न स थ न INSTITUTE FOR PLASMA RESEARCH परम ण ऊज वभ ग, भ रत सरक र क एक सह यत त स थ न An Aided Institute of Department of Atomic Energy, Government of India इ र प ल क प स, भ ट, ग ध नगर 382 428
More informationMAGTROL. TF Series Torque Flange Sensor. TF data sheet FEATURES. DESCRIpTION. AppLICATIONS
data sheet Series Torque Flange Sensor FETURES Complete torque measuring system consisting of: Measuring flange with signal amplifier HF transmitter Conditioner 4 m coaxial cable Contactless signal transmission:
More informationHK Equipment CZD Brake tester Max. weight Size Roller size Measure range Error Rated use condition: CCH Sideslip tester 10,000kg (15,000kg) 3990 x 840
UTOMOTIVE GRGE EQUIPMENT TIR SYSTEM110 Brake tester HP pply car kind Roller unit vailable with power rating Speed Max. load capacity Max. effect Precision Roller (D x L mm) 1 HP 1022 Sideslip tester 4WD,
More informationMaryland Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kw to 10 MW or less)
Maryland Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kw to 10 MW or less) Interconnection Customer Contact Information Name: Address: City: Telephone (aytime):
More informationSupply of 63 kva DIESEL GENERATOR SET WITH AMF
No. NIQ/INKEL/2015-16/162 24 TH Nov 2015 NOTICE INVITING QUOTATION Sealed Quotations are invited for and on behalf of INKEL Limited, having its registered office at INKEL Centre, Off Vallathol junction,
More information: Material Description Quantity UOM
Page : 1 / 2 OIL INDIA LIMITED (A Govt. Of India Enterprise) Tel :033 2230 1657, 1658 4, India Exchange Place, Fax :91 33 2230 2596 Kolkata-700001 E-mail :oilcalmn@cal2.vsnl.net.in ANNEXURE-I Item No./
More informationBHARAT HEAVY ELECTRICALS LIMITED Industrial Valves Plant Goindwal (AMRITSAR) Enquiry Date:
BHARAT HEAVY ELECTRICALS LIMITED Industrial Valves Plant Goindwal 143422 (AMRITSAR) ENQUIRY Phone:+91 1859 223381 (+91 1859 222002, 222036, 222039 Extn 117) Fax :+91 1859 222 061 Email :srk@ivp.bhel.co.in
More informationEE 370L Controls Laboratory. Laboratory Exercise #E1 Motor Control
1. Learning Objectives EE 370L Controls Laboratory Laboratory Exercise #E1 Motor Control Department of Electrical and Computer Engineering University of Nevada, at Las Vegas To demonstrate the concept
More informationHolzma Panel Saw, Model Optimat HPP 250
Holzma Panel Saw, Model Optimat HPP 250 The Holzma Optimat HPP 250 automatic panel saw is designed to provide today s craftsman with the best in class solution for stack and single sheet panel processing.
More informationSoft-Engine - Data store software: Shock 3.1
Soft-Engine - Data store software: Shock 3.1 Software description The shock-absorber dynamometer software allows all typical tests The software is "friendly", because all data can be visualized/printed
More informationAPPLICATION SYSTEMS. BLDC Hub Motor / BLDC Shafted Motor Test Set Up. Dynamometer, Controls & Test Bed
Gawkar Industrial Estate, Panch Pakhadi Service Road, Thane: 400 602. (Maharashtra) India. Ph No: +91 22 32420541 / 25383001 Email: applicationsystems@gmail.com applicationsystems@yahoo.co.in Website:
More informationREQUEST FOR QUOTATION
REQUEST FOR QUOTATION TO, GAIL WEBSITE VENDOR India Vendor Code - 101019938 RFQ No.: GAIL/08/RJ19140/3300025749/ Dated : 23.07.2008 Kind Attn : Mr/Ms Dear Sir/Madam, GAIL (India) Ltd. invites you to submit
More informationTechnologies for ToT & Power Electronics Test Facility. under NaMPET-II CDAC, Thiruvananthapuram
Technologies for ToT & Power Electronics Test Facility under NaMPET-II CDAC, Thiruvananthapuram 1 OUTLINE Technologies for ToT Power Electronics Test Facility (PETF) 2 Technology Developed 1. Miniature
More informationURM-00 TRAINING MODULE FOR INDUSTRIAL ELECTRIC MOTORS FOR MAIN DRIVE AND CONTROL CIRCUITS EDUCATIONAL KIT TO STUDY MOTORS CONTROL AND PROTECTION
URM-01/PP Stepper motor URM-02/CC DC motor (2-quadrant) URM-03/CA AC three-phase motor URM-04/BL Brushless motor URM-05/4Q DC motor (4-quadrant) URM-06/PS Speed and position DC motor URM-SMC Multifunzional
More informationElectro Pneumatic WorkStation Scientech 2470
Electro Pneumatic WorkStation is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial Automation
More informationTECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH
TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LTD. PAGE 1 OF 7 TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH 1.0 SCOPE:
More informationUnidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs
Unidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs 0.25 kw - 110 kw (0.33 hp - 150 hp) 100 V 200 V 400 V 575 V 690 V Unidrive M400 features Optional AI-485
More informationLegal Name of the Customer (or, if an individual, individual's name): Name: Contact Person: Mailing Address: Physical Address: City: State: Zip Code:
Generating Facility Level 2 or 3 Interconnection Review (For Generating Facilities with Electric Nameplate Capacities no Larger than 20 MW) Instructions An Interconnection Customer who requests a Utah
More informationLevel 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 25 kw to 10 MVA or less)
Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 25 kw to 10 MVA or less) Interconnection Customer Contact Information Name Alternative Contact Information (if different
More informationDOLI's STANDARD COMPRESSION FLEXOMETER (GOODRICH FLEXOMETER)
Qualitest USA LC, Toll-Free: 1.877.884.TEST, Fax: 954.697.8211, E-mail: info@qualitest-inc.com DOLI's STANDARD COMPRESSION FLEXOMETER (GOODRICH FLEXOMETER) Basic System The measurement is based on ISO
More informationElectro Pneumatic Workbench Scientech 2470
Scientech 2470 Electro Pneumatic Workbench is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial
More informationINVITATION FOR QUOTATION. TEQIP-III/2018/ntst/Shopping/35
INVITATION FOR QUOTATION TEQIP-III/2018/ntst/Shopping/35 29-Dec-2018 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
More informationCombustion Analyser. Any In/out signal. Data Interface. Pressure signals. Encoder OR 60-2 sensor AUTOMOTIVE
Combustion Analyser Data Interface Any In/out signal DURABILITY TESTING Pressure signals POWERTRAIN AND E-MOBILITY Encoder OR 60-2 sensor SIRIUSi Combustion Analyser systems from Dewesoft are used for
More informationSPECIFICATIONS OF SINGLE GIRDER UNDER SLUNG E.O.T. CRANE CAPACITY: 5 MT
1 SPECIFICATIONS OF SINGLE GIRDER UNDER SLUNG E.O.T. CRANE CAPACITY: 5 MT QUALIFICATION CRITERIA Vendor has to compulsorily meet the following requirements to get qualified for consideration of the technical
More informationInnovative Testing Equipment. Series DF torque sensors
Innovative Testing Equipment Series DF torque sensors The DF sensor ATESTEO is the leading specialist for drivetrain testing combined with component validation, vehicle measurement technology, and engineering
More informationCHAPTER 4 VARIABLE COMPRESSION RATIO ENGINE WITH DATA ACQUISITION SYSTEM
57 CHAPTER 4 VARIABLE COMPRESSION RATIO ENGINE WITH DATA ACQUISITION SYSTEM 4.1 GENERAL The variable compression ratio engine was developed by Legion brothers, Bangalore, India. This chapter briefly discusses
More informationDXG 100 CNC Chucker with Gantry Robot
DXG 100 CNC Chucker with Gantry Robot jyoti. co.in DXG 100 CNC Chucker with Gantry Robot OVERVIEW DXG 100 is developed by considering industry requirement of small disc - type precision components in huge
More informationB BASIC HEAT TREATMENT CONSOLE
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
More informationTECHNICAL SPECIFICATIONS OF 2 KVA POWER CONDITIONING UNIT
TECHNICAL SPECIFICATIONS OF 2 KVA POWER CONDITIONING UNIT 1.0 PURPOSE: 1. To charge the battery bank through Solar PV source and AC supply. 2. To invert and produce utility quality sine wave. 3. Inverters
More informationSINAMICS GM150 IGCT version
/2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions
More informationElectric Motor Test Systems Comprehensive Test Solutions for all kinds of Electric Motors
Crest Enhanced Quality Assurance Crest Test Systems Pvt. Ltd. Electric Motor Test Systems Comprehensive Test Solutions for all kinds of Electric Motors Electric Motor Test Systems Customisable for application
More informationComputerized VCR Single Cylinder Diesel Engine Test Set up
TENDER FOR Item No. 2 Computerized VCR Single Cylinder Diesel Engine Test Set up (UGC) FOR DEPARTMENT OF MECHANICAL ENGINEERING Dr. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY, LONERE - 402 103 TAL. MANGAON,
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
More informationTouch plate serial number. Please save this info here for use later:
Touch Plate Manual Touch plate serial number. Please save this info here for use later: Copyright Next Wave Automation All Rights Reserved. Version 2 April14th 2017 Updates of this manual are available
More informationDATUM ELECTRONICS RS425 NON-CONTACT TORQUE TRANSDUCER PRODUCT OVERVIEW
DATUM ELECTRONICS LIMITED TELEPHONE: +44 (0) 1983 28 28 34 FAX: +44 (0) 1983 28 28 35 EMAIL: support@datum-electronics.co.uk WEB: www.datum-electronics.co.uk DATUM ELECTRONICS RS425 NON-CONTACT TORQUE
More informationstage from resolution accuracies is 400 peak) and the from an to outpu positioning (as shown N] continuous continuous needs
Earthquake Simulation Using Single or Dual-Axis Linear Motion Stages With the goal of safer buildings and saving lives, scientists and engineers, through the simulation of many recent earthquakes, need
More informationLevel 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kva to 10 MVA or less)
Section 466.APPENIX C Levels 2 to 4 Application Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 10 kva to 10 MVA or less) Interconnection Customer Contact Information
More informationTechnical Specifications
LT Distribution Box Technical Specifications 1. SCOPE 1.1 This specification covers design, manufacture, testing at manufacturer works before dispatch and supply of L.T. Distribution Cabinet suitable for
More informationRENEWABLE ENERGY TRAINER
RENEWABLE ENERGY TRAINER Our most advanced training platform, for your most advanced experiments. Explores the cutting-edge science behind renewable energy engineering Features dozens of customizable expansion
More informationSPECIFICATION SHEET Pulse tool / Impact Wrench Testing System MODEL : IWT-101
Applications Calibration of Impact tools Calibration oil pulse tools And also any type of manual wrenches Importance of Torque tool calibration: Controlling torque of a torque tool is important for companies
More informationCENTROIDTM. AC Brushless Drive. Product Spec Sheet
4 Axis, up to 2 KW motors Brake Output for each axis Overtemp and Overcurrent Protection All-software Configuration Self-cooled Fiber Optic Control CENTROIDTM AC Brushless Drive Product Spec Sheet AC Brushless
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control
More informationFrequency inverters overview
Frequency Inverter Frequency inverters overview Frequency inverters of TOSHIBA convince plant manufacturers and machine operators worldwide due to high reliability in operation and flexibility in application.
More informationCross Flow Heat Exchanger H352
Cross Flow Heat Exchanger H352 H352 Shown With Optional Plain Tube of H352A fitted. Allows Investigation Of Plain And Finned Cross Flow Heat Exchangers. Expandable Free & Forced Convection Heat Transfer
More informationUnidrive M700 Class leading performance with onboard real-time Ethernet
Unidrive M Class leading performance with onboard real-time Ethernet. kw -.8 MW Heavy Duty (. hp -, hp) V V V 9 V Unidrive M features Easy click-in keypad connection Range of multi-language LCD keypads
More informationTechnical Part. Technique Specification
HYDRAULIC CNC PUNCHING MACHINE (VT-300) Technical Part Technique Specification Description Unit VT-300 Punch Force KN 300 Max. Processing Size mm 1250*2500 (with one reposition) Processing Thickness mm
More information/ I S S : / S T S I
Agenda Electrical Transformers (Quality Control) Order Obtaining BIS Licence Requirements of Guidelines / IS 1180-1: 1: 2014 / STI Concerns in Getting BIS Licence Experience with BEE Regulations Recommendations
More informationPAS Series AC Servo Motor. Datasheet
PAS Series AC Servo Motor Datasheet Version PAS 2013 01 http://www.primopal.com Description PrimoPal offers a wide selection of high performance brushless AC servo motors, with power ratings from 200 W
More informationSPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT /
SPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT / 2005-06 SR.NO ITEM PAGE 1. SCOPE 2 2. WEATHER CONDITIONS 2 3. RATED VOLTAGE & FREQUENCY 2 4. GENERAL REQUIREMENT
More informationCement Compression & Flexural Testing Machines
The Compression & Flexural testing product line from Torontech offers a wide variety that will fit almost any budget. Different options between models include digital or analog display, single or dual
More informationUniversity of Houston Master Construction Specifications Insert Project Name SECTION ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL
SECTION 23 04 10 ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationOFF-GRID Hybrid (BI-DIRECTIONAL) SOLAR INVERTER SOLAR INVERTER SOLAR UPS
OFF-GRID Hybrid (BI-DIRECTIONAL) SOLAR INVERTER SOLAR INVERTER SOLAR UPS ITS Power & Infrastructure Pvt. Ltd. is a leading designs, manufacturer & supplier of power product. ITS Power Company is in Bavdhan,
More informationTESTING BEYOND.
TESTING BEYOND www.motoplat.nl Motoplat Motoplat TESTING BEYOND Leading Technology To be and to remain advanced in technology, we of Motoplat develop all software on the testers ourselves. Reliability
More informationMTAB. MACHINING CENTERS
MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,
More informationA unique density, viscosity sensor. High technology brick. Field oriented. For light & medium petroleum products. Related norms
For light & medium petroleum products A unique density, viscosity sensor DEVIL for light fuels is the only density + viscosity + temperature sensor available on the market, dedicated to light refined cuts.
More informationIs Your Factory Power Source Corrupting Your Product Testing? September 2015 Author: Steve Boegle Engineering Group Leader, Behlman Electronics
Is Your Factory Power Source Corrupting Your Product Testing? September 2015 Author: Steve Boegle Engineering Group Leader, Behlman Electronics Synopsis: This paper describes the use of AC power supplies
More informationFully automated work cycles
NEW Fully automated work cycles ARTIGLIO MASTER CODE continues in its constant evolution, faithful to the corporate mission of continuous innovation in products and technologies. The new developments are
More informationTE 91 PRECISION ROTARY VACUUM TRIBOMETER
TE 91 PRECISION ROTARY VACUUM TRIBOMETER Description The TE 91 Precision Rotary Vacuum Tribometer is based on a bench mounted test chamber. A motor driven test spindle, in the form of standard rotary feedthrough,
More informationSection II -Technical Specification
Page 1 of 9 1 Place where equipment to be CPRI campus Bengaluru supplied 2 Scope (supply / supply & Installation / suply, installation & training) Periodical inspection and service of the unit once in
More informationNOTICE INVITING EXPRESSION OF INTEREST FOR IGBT BASED VFD
Bharat Heavy Electricals Limited (A Government of India Undertaking) ELECTRONICS DIVISION P.B.No 2606, Mysore Road, Bangalore - 560 026 NOTICE INVITING EXPRESSION OF INTEREST FOR IGBT BASED VFD EOI REFERENCE
More informationPowerFlex 6000 Medium Voltage AC Drives
PRELIMINARY INFORMATION PowerFlex 6000 Medium Voltage AC Drives Simple. More Reliable. Easy-to-use. User-friendly Control for Variable and Constant Torque Applications Cost-effective solutions for new
More informationPowerFlex AC Drives Portfolio
PowerFlex AC Drives Portfolio PUBLIC INFORMATION 1 Rev 5058-CO900E Copyright 2013 Rockwell Automation, Inc. All Rights Reserved. PUBLIC INFORMATION Copyright 2015 Rockwell Automation, Inc. All Rights Reserved.
More informationTesting Energy Storage Systems: From EVs to Utility Grid
Testing Energy Storage Systems: From EVs to Utility Grid Jonathan P. Murray Business Development Manager 2008 Bloomy Controls. All Rights Reserved Agenda Energy storage system landscape Electric vehicle
More informationLIFT INVERTER SERIES L1000V DE ES FR IT 1000V L1000V L1000V L1000V L1000V
LIFT INVERTER SERIES EN DE ES FR IT 1000V YASKAWA INVERTER DRIVE TECHNOLOGY Contents Page 2 Introduction Experience & Innovation YASKAWA speaks Lift Page 3 YASKAWA Main Features Page 4 Specifications Page
More informationAUTOMATED TORSION BENCH DRIVETWIST
Force and torque measurement systems AUTOMATED TORSION BENCH DRIVETWIST ANDILOG Technologies info@andilog.com Phone : +33 (0) 820 888 202 Fax : +33 (0) 820 888 902 Automated torsion bench DRIVETWIST Automated
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More information