ICT820 CAN SAE J1939 OUTPUT IN-CYLINDER LINEAR TRANSDUCER

Transcription

1 PRLIMINRY PROUT INFORMTION SUJT TO RVISION Ver. (May 201) The IT820 ontactless Inylinder Linear Transducer combines the best features associated with LVTs and potentiometers into one rugged, contactless and highly reliable displacement transducer with the addition of a N S J199 interface. Signal conditioning is integrated into the transducer flange. Operating from 8 0Vdc or 5Vdc supply, the electronics provide a N S J199 output over the selected transducer measurement range. With a transducer body diameter of only 8mm the IT820 is ideal for installation into hydraulic and pneumatic cylinder applications where space is at a premium. The IT820 is ideal for use on smallbore actuators and offers a choice of internal or threaded external flange mounting configurations to suit tierod, welded and rear clevismounted cylinder types in stroke ranges from 25 to 1000mm. Two core configurations also provide the designer the following options: SLV OR cylinder rods can be simply machined to accommodate the sleeve. This also gives the option of retrofitting existing servocylinders with an upgrade to IT technology. THR OR provides the designer with the minimum transducer body size and simplified installation requiring minimal machining. With no electrical sliding contacts, the IT820 has a working life which is almost limitless. Key Features Measurement range mm Small transducer body length to stroke ratio Working pressure to 670 ar (10,000 psi) Temperature range 40 to 125 Operates from 5Vdc or 80Vdc N S J199 output Selectable Node I, aud and Frame Rate Flexible mounting styles Rugged stainless steel construction IT820 N S J199 OUTPUT INYLINR LINR TRNSUR Innovation In Motion 1

2 MTRI IF IN OUT SK ll specification data on this drawing has been tested and documented by Penny & Giles unless otherwise stated. ISS 5 T RWN R No. 6 HK PP USTOMR SLTL FLNG, ONNTION N OR MOUNTING OPTIONS XTRNL HX FLNG XXL XIT ORRING O IT820JSXX RTRT INTRNL STOP 1.0 MX LTRIL 4 MIN. STROK S.H M.. M.. MHNIL XTNSION LIMIT TIL SL 2 : 1.5 S ORRING O HX.F HX.F. 8 XTRNL HX FLNG 01M12 ONNTOR ORRING O IT820JTO STROK 65 THR M6 x 16g (TH TILS IN THIS RGION ONFORM TO ISO61492 M18 X 1.5 FOR WHIH PORT UTTRS R VILL) SL 1:1 UNLSS STT THIR NGL PROJTION TO S THR M12 X IF ONTROL IMNSIONS (Kc) R SPIFI THY R TO SUJT TO 100% INSPTION OR STTISTIL PROSS ONTROL. MSS (g) M12 5 PIN ML SOKT INTRNL FLNG FXX L XIT ORRING O IT820JISFXX No IT820 FIRST US ON RF S ORRING O MTRIL 5.00 STINLSS STL LN LL SRW THRS TO S64 PT.2: XTRNL LSS: 6g INTRNL LSS: 6H STROK STROK 76 TOLRNS: INLIN WITH PNNY & GILS STNRS 5501 SURF TXTUR VLUS IN MIROMTRS ( mm) TO S114:PT2. LL MHIN SURFS TO 1.6 NGULR LINR (MHINING) RK G 0,5 mm mm 0,2 mm FILLT RS 0,1mm mm 0,01mm UNLSS OTHRWIS STT 20 TITL IN YLINR TRNSUR WITH N OUTPUT RPROUTION NY PRT THIS OUMNT IS FORIN WITHOUT PRIOR PRMISSION FROM PNNY & GILS. SIGN OPYRIGHT RSRV. ONFINTIL N PROPRITRY INFORMTION PNNY & GILS TIL SL 2 : PRT NUMR: IT FOR SUGGST INSTLLTION IMNSIONS, RFR TO I SHT 1

3 MTRI IF IN OUT SK SPIFITION T: LTRIL SUPPLY VOLTG ll specification data on this drawing has been tested and documented by Penny & Giles unless otherwise stated. FOR J199 T RFR TO P&G O: IT J199 80Vdc UNRGULT 5Vdc 0.1Vdc RGULT (OUTPUT WILL FOLLOW INPUT VRITIONS) SUPPLY URRNT <80m SHORT IRUIT PROTTION LL ONNTIONS TO LL ONNTIONS (XPT N TO 10V MX) RVRS POLRITY PROTTION YS POWR ON TIM <1S RSOLUTION 1 ITS OVR VOLTG PROTTION UP TO 40Vdc NON LINRITY <±0.1% TMPRTUR FIINT <±00ppm OUTPUT IRTION J199 FTORY ST (S FIG 2) OUTPUT NOIS ±1 IT INPUT OUTPUT LY MX = SLT FRM RT TUL LTRIL STROK =HIGH SIGNL OUTPUT LOW SIGNL OUTPUT (S FIG 2) TMPRTUR OUTPUT <± OVR TMPRTUR RNG SNSOR FULT TTION OPN IRUIT OR SHORT IRUIT OIL MO... J J199 FLNG... I INTRNL XTRNL OR OPTION... S SLV T THR MX LTRIL STROK.. 25 mm TO 1000 mm (25 TO 200 IN 5 mm INRMNTS 210 TO 1000 IN 10 mm INRMNTS) ISS T RWN R No. HK PP S.H M.. M.. IT820 NVIROMNTL OPRTIONL TMPRTUR RNG 40 TO 125 (XX L 40 TO 105 ) STORG TMPRTUR RNG 40 TO 85 LIF ONTTLSS VLOITY MX 2ms IN HYRULI PPLITIONS (ISO VG2 MINRL OIL) VIRTION S N (9gn RMS) SHOK 2500g SURVIVL PRSSUR WORKING 670 R URST 1000 R PULS 0 TO 470 R IN 1 SON (TST TO 100,000 YLS) WORKING FLUIS OMPTIL WITH WI RNG HYRULI FLUIS INLUING MINRL, SYNTHTI, FIR RTRNT N O S FLUIS. M IRTIV SLING FOR SLING INFORMTION S SHT 4 MTTFd 20 YRS LOW SIGNL OUTPUT POSITION FROM TUM... FULT 0000 mm (S FIGUR 2) HIGH SIGNL OUTPUT POSITION FROM TUM... FULT MX LTRIL STROK (S FIGUR 2) U RT kbits kbits 250 kbits kbits 5 1 Mbits NO I IN HXIIML... etween 01 and 7F NOT: FOR OPTIMUM PRFORMN SUPPLY GROUN NS TO ONNT TO SNSOR S OR SNSOR S ONNT TO SYSTM GROUN NOT: N TRVL FLGS: 1% & 99% RROR FLG % & 97% WRNING FLG (SHOWN IN FIGUR 1) FRM RT mS 2 20mS 0mS 4 40mS 5 50mS 6 60mS 7 70mS 8 80mS 9 90mS 0 100mS ONNTIONS... S ONNTOR L ONNTIONS 01 M12 ONNTOR XX L GLN L LNGTH FXX FLYLS LNGTH SL UNLSS STT THIR NGL PROJTION TO S 8888 IF ONTROL IMNSIONS (Kc) R SPIFI THY R TO SUJT TO 100% INSPTION OR STTISTIL PROSS ONTROL. MSS (g) No RF. IT820 FIRST US ON MTRIL TOLRNS: INLIN WITH PNNY & GILS STNRS 5501 SURF TXTUR VLUS IN MIROMTRS ( mm) TO S114:PT2. LL MHIN SURFS TO 1.6 LL SRW THRS TO S64 PT.2: XTRNL LSS: 6g INTRNL LSS: 6H NGULR LINR (MHINING) RK G 0,5 mm mm 0,2 mm FILLT RS 0,1mm mm 0,01mm UNLSS OTHRWIS STT TITL IN YLINR TRNSUR N OUTPUT PRT NUMR: IT820 SHT 2 RPROUTION NY PRT THIS OUMNT IS FORIN WITHOUT PRIOR PRMISSION FROM PNNY & GILS. SIGN OPYRIGHT RSRV. ONFINTIL N PROPRITRY INFORMTION PNNY & GILS.

4 MTRI IF IN OUT SK ll specification data on this drawing has been tested and documented by Penny & Giles unless otherwise stated. ISS T RWN R No. HK PP S.H M.. M.. FIGUR 1 N TRVL FLGS TUL LTRIL STROK FIGUR 2 RTRT INTRNL STOP TUM OUTPUT LW TUM MHNIL XTNSION LIMIT 1% % 99% 97% OUTPUT OUNTS LTRIL STROK LOW SIGNL OUTPUT POSITION HIGH SIGNL OUTPUT POSITION TUL LTRIL STROK N TRVL FLGS LIMIT MSSG % 97% 1% LOW WRNING HIGH WRNING LOW RROR S ORRING O OUTPUT LW XMPL FOR MX LTRIL STROK 1000 mm SNSOR 99% HIGH RROR NOT: NON STNR OUTPUT LWS VILL I.. SWITH OUTPUTS SL 1:1 UNLSS STT THIR NGL PROJTION TO S 8888 IF ONTROL IMNSIONS (Kc) R SPIFI THY R TO SUJT TO 100% INSPTION OR STTISTIL PROSS ONTROL. MSS (g) No RF. IT820 FIRST US ON MTRIL TOLRNS: INLIN WITH PNNY & GILS STNRS 5501 SURF TXTUR VLUS IN MIROMTRS ( mm) TO S114:PT2. LL MHIN SURFS TO 1.6 LL SRW THRS TO S64 PT.2: XTRNL LSS: 6g INTRNL LSS: 6H NGULR LINR (MHINING) RK G 0,5 mm mm 0,2 mm FILLT RS 0,1mm mm 0,01mm UNLSS OTHRWIS STT TITL IN YLINR TRNSUR N OUTPUT PRT NUMR: IT820 SHT RPROUTION NY PRT THIS OUMNT IS FORIN WITHOUT PRIOR PRMISSION FROM PNNY & GILS. SIGN OPYRIGHT RSRV. ONFINTIL N PROPRITRY INFORMTION PNNY & GILS.

5 MTRI IF IN OUT SK ll specification data on this drawing has been tested and documented by Penny & Giles unless otherwise stated. ISS 5 T RWN R No. 6 HK PP 01 M12 ONNTOR IP67 PIN 4 PIN 1 KY WY MTING ONNTOR VILL (TMPRTUR RNG 40 TO 105 ) S210555MK1 = 1 m S210555MK5 = 5 m S210555MK10 = 10 m WIR ONNTIONS LU WIR: N LOW ROWN WIR: VSUPPLY LK WIR: N R WIR: N HIGH GRN WIR: GROUN FXX FLYLS IP66 ONNTOR N L ONNTIONS TIL SL 2 : 1 60 MX 1.0 PIN 5 PIN PIN 2 TIL SL 2 : 1.5 PIN 1 PIN 2 PIN PIN 5 PIN 4 FLYL LNGTH =FXX 250 N VSUPPLY GROUN N LOW N HIGH ORRING OS FP2 = 200 mm FLYLS FP5 = 500 mm FLYLS F01 = 1 m FLYLS ORRING OS 01 = 01 m L MIN 06 = 06 m L MX IN 1 m INRMNTS LL VRINTS: STINLSS STL 16 OY (S) SLV GUI TU STINLSS STL 0 FLNG LLOY 52 OR HNR 'O'RINGS TIL SL 2 : S.H M.. M.. XX L IP69K WIR ONNTIONS LU WIR: N LOW R WIR: VSUPPLY WHIT WIR: N HIGH LK WIR: GROUN L LNGTH =XX IT820 MTRILS US XX OPTION: NIKL PLT RSS L GLN FPM L GLN SL PURPV L 01 OPTION: P66 ONNTOR INSRT NR 'O' RING FXX OPTION: SILION RUR L SL SL 1:1.5 UNLSS STT THIR NGL PROJTION TO S 8888 IF ONTROL IMNSIONS (Kc) R SPIFI THY R TO SUJT TO 100% INSPTION OR STTISTIL PROSS ONTROL. MSS (g) No RF. IT820 FIRST US ON MTRIL TOLRNS: INLIN WITH PNNY & GILS STNRS 5501 SURF TXTUR VLUS IN MIROMTRS ( mm) TO S114:PT2. LL MHIN SURFS TO 1.6 LL SRW THRS TO S64 PT.2: XTRNL LSS: 6g INTRNL LSS: 6H NGULR LINR (MHINING) RK G 0,5 mm mm 0,2 mm FILLT RS 0,1mm mm 0,01mm UNLSS OTHRWIS STT TITL IN YLINR TRNSUR N OUTPUT PRT NUMR: IT820 SHT 4 RPROUTION NY PRT THIS OUMNT IS FORIN WITHOUT PRIOR PRMISSION FROM PNNY & GILS. SIGN OPYRIGHT RSRV. ONFINTIL N PROPRITRY INFORMTION PNNY & GILS.

6 Penny & Giles Position sensors, joysticks and solenoids for commercial and industrial applications. oc Ref: SRH520N irfield Road hristchurch orset H2 TG United Kingdom 44 (0) (0) Fax 6 Nine Mile Point Industrial state wmfelinfach Gwent NP11 7HZ United Kingdom 44 (0) (0) Fax 665 North aldwin Park oulevard ity of Industry, US Fax us.sales@pennyandgiles.com Straussenlettenstr. 7b 8505 Ingolstadt, Germany 49 (0) (0) Fax info@pennygiles.de No. 116, Sumu Road, Suzhou Industrial Park, Jiangsu, hina Fax sales@pennyandgiles.com.cn The information contained in this brochure on product applications should be used by customers for guidance only. PennyGiles ontrols Ltd makes no warranty or representation in respect of product fitness or suitability for any particular design application, environment, or otherwise, except as may subsequently be agreed in a contract for the sale and purchase of products. ustomer s should therefore satisfy themselves of the actual performance requirements and subsequently the products suitability for any particular design application and the environment in which the product is to be used. ontinual research and development may require change to products and specification without prior notification. ll trademarks acknowledged. PennyGiles ontrols Ltd 201 Innovation In Motion