Keymatic Line of Locks
|
|
- Geraldine Hodge
- 6 years ago
- Views:
Transcription
1 Volume 5 a t a l o g enstan L O O M P N Y eymatic Line of Locks 2 S V X Introduction 1 am Locks 2 3 rawer/oor Locks 4 Gang Locks 5 Snap olt Lock 6 s Z olt Locks 12 Ratchet Locks 13 eys 14
2 enstan L O O M P N Y enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
3 ata Sheet eymatic Line Introduction 1 eymatic Line of Locks Standard PN Polished Nickel Our line offers excellent security in a variety of lock types that can be keyed to thousands of different key codes. ach key code has eight individual operating keys 1 through 8, used one at a time to operate the lock. Our Red hange Tool can reset the lock to allow a new operating key (within the assigned code) to open the lock any time a key is lost or stolen truly eight locks in one. Locks can be keyed alike, individually or in groups * Special es SN Satin Nickel elivery t enstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within two weeks from the receipt of your order. Rush orders and emergency services are available. Plating The line standard plating finish is Polished Nickel. P S L Polished rass Satin rass Matte lack wide range of special plating finishes is also available, including Satin Nickel, Polished rass, Matte lack, Statuary ronze, Satin rass and ustom inishes to match your showcase hardware. Please note: may apply to Special and ustom finishes. Please call enstan for details. ey ontrol eymatic locks and keys are built to a high level of precision, making key duplication very difficult. Please note: We recommend our factory original key for smooth lock operation. Use of non-enstan copy will void the enstan warranty on our locks. We can register your keys and maintain your key plans by store, retail department, showcase/cabinets, or office and we maintain a historical database of key numbers. ll operating keys are stamped with a two-digit, alpha numeric date code, a four-digit, numeric eymatic code and a one-digit, numeric setting code (from 1 to 8) with a matching color coded key cover. The Red hange Tool is stamped with the same code as the operating key, except without the setting code. * ST Statuary ronze ustom ey Retaining vs. Non-ey Retaining Lock unction The line standard operation is a key retaining function (captive), which means that the operating key can be removed in the locked position only; therefore, the lock cannot be accidentally left in the open/unlocked position. ustom inish locks can also be supplied as non-key retaining (non-captive), which allows the key to be removed in both the locked and unlocked position. * may apply to Special and ustom finishes. Please call enstan for details. esigner Note: or true captive operation, the use of our captive key locks must be coordinated with sliding door showcase design. The use of non by-passing sliding doors is recommended to restrict door movement and ensure key removal only when the doors are in the secure position. enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
4 enstan L O O M P N Y To determine your item number enter the R option G H L PN Y W 106 L am Lock G ore Type eymatic Housing Length MXIMUM MTRIL THINSS RRL WOO MTL GLSS LNGTH 02 7/16 1/4 11/16 $ /16 15/ * 3/4 7/8 11/ / / / / / am Rotation LO OPN may apply to Special and ustom finishes. P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all Special inish ey Retaining Y Yes Std. N No 1.25 Material Installation W Wood 0.00 M Metal 0.00 GR Glass with Round Hole 2.95 G Glass with ouble Hole 1.95 O Other - No Mounting Hardware 0.00 Note: eys are not included with this lock. See page 14 to order keys. s vary according to quantity ordered. Note: ll am Locks come with a 1-1/4 Straight am unless a different cam is chosen. H am Type STRIGHT 101 $ / / /4 Std / OST 303 7/ / /4 OST 403 7/ / / / OST / OST / / OST HOO 202 3/ / / PIN M P604 9/16 offset 4.95 OR SWITH IT SL No am* 0.00 *Switch option available. See Page 10 to order switch kit. ontinued enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
5 ata Sheet eymatic Line am Lock 3 L HOUSING LNGTHS 02, 03, 04 and 05 RRL LNGTH MXIMUM MTRIL THINSS G MTL INSTLLTION M SMLL THR T WSHR NTI-ROTTION THR T WSHR (TS NT OVR TO PRVNT NUT ROM ING OUT) 1/4 7/8 3/4 THR T WSHR VRTIL LTS HOUSING LNGTHS 10, 11, 12, 13, 14 and 15 7/8 M LO (UT OUL HOL ON SHT MTL) TS NT OVR TO PRVNT NUT ROM ING OUT RRL LNGTH MXIMUM MTRIL THINSS SRW WSHR G GLSS INSTLLTION - ROUN HOL GR GLSS SMLL THR T WSHR NTI-ROTTION THR T WSHR (TS NT OVR TO PRVNT NUT ROM ING OUT) 1-1/4 1-1/4 SLV M LO XPLO VIW LO XTNSION ROUN ST SRW NTI-ROTTION PLT SLV MOUNTING SRWS NTI-ROTTION PLT 7/8 XTNSION SLV WSHR XTNSION SLV STRIGHT M SM-SRW G IXING WSHR NTI-ROTTION L RT NTI-ROTTION THR T WSHR PLSTI WSHRS TS NT OVR TO PRVNT NUT ROM ING OUT M LO imension from center of hole to the edge of glass is 1-1/4 GLSS INSTLLTION - OUL HOL G NTI-ROTTION THR T WSHR GLSS SMLL THR (TS NT OVR TO T WSHR PRVNT NUT ROM ING OUT) M ROTTION XMPL M LO LT MTL WSHR NTI-ROTTION THR T WSHR PLSTI WSHRS TS NT OVR TO PRVNT NUT ROM ING OUT 3 H M TYPS 1/4 I. ll 180 degree rotations are clockwise, unless specified. G WOO INSTLLTION W # 6 NUT RTNTION SRWS # 6 INSTLLTION SRWS HX NUT SMLL THR T WSHR NOT: # 6 SRW US TO PRVNT INSTLLTION NUT ROM ING OUT. LNGTH LNGTH OST IM Note: ll Offset cams are reversible. LNGTH 1-1/4 Straight am Offset am Hook am Pin am 9/16 M M PTR LRG HX NUT M LO NTI-ROTTION MOUNTING PLT TS NT OVR TO PRVNT NUT ROM ING OUT enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
6 4 L eymatic Line rawer/oor Lock enstan L O O M P N Y ata Sheet To determine your item number enter the R option L S 2001 PN Y L rawer/oor Lock ore Type eymatic Throw (distance bolt travels from the locked to unlocked position) is 5/16. ll dimensions shown are in the locked position. Housing Length STRIGHT OLT HOUSING LNGTH S 13/16 $24.38 M 1-1/ L 1-3/ olt Type STRIGHT OLT /16 Std / / OST OLT IST SPRING OLT /16 Std INVRT SLIING SPRING OLT /16 Left /16 Right 9.97 s vary according to quantity ordered. 5/32 I. 1-7/16 2 OST OLT /8 S M L 1-1/4 may apply to Special and ustom finishes /4 Special inish P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all IST SPRING OLT (3/16 bolt engagement recommended) 3/4 ey Retaining 5/16 Option available only on Straight olt * and Offset olt models N No 1.25 Y* Yes Std. Note: eys are not included with this lock. See page 14 to order keys. INVRT SLIING SPRING OLT (shown) 1-5/16 enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
7 ata Sheet enstan L O O M P N Y eymatic Line Gang Lock 5 GL To determine your item number enter the R option GL S 2448 PN Y Notch for Pin must be on ottom of rawer GL ore Type Gang Lock eymatic Housing Length S 13/16 $23.47 M 1-1/ L 1-3/ Notch for Pin must be on Top of rawer Mount Style/ar Length RONT MOUNT LO UP L ustom all 24NO No ar 1.07 SI MOUNT LO UP L ustom all RONT MOUNT LO OWN L ustom all 28NO No ar 1.07 SI MOUNT LO OWN L ustom all s vary according to quantity ordered. Throw (distance bolt travels from the locked to unlocked position) is 5/16. RONT MOUNT RONT VIW 5/32 I. 1-7/ /4 LO UP 15/16 LO OWN RONT MOUNT (Shown with a Gang 3 it) L L RONT MOUNT SI VIW 7/8 S M L 1/ /4 SI MOUNT (Shown with a Gang 3 it) L L may apply to Special and ustom finishes. P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all Special inish Gang Lock Packages To determine your item number enter the R option GNG 3 kit with three GNG 3 adjustable stops, three 1- pins, three lock washers, and four closed bar guides. ey Retaining N No 1.25 Y Yes Std. Note: eys are not included with this lock. See page 14 to order keys. Package GNG Number of rawers 2 $ Pin Length 3/ /8 enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
8 6 L36 eymatic Line Snap olt Lock enstan L O O M P N Y ata Sheet To determine your item number enter the R option L M 36 PN N L rawer/oor Lock ore Type ll dimensions shown are in the locked position. eymatic SNP OLT HOUSING LNGTH 5/32 I. Housing Length S 13/16 $28.22 M 1-1/ L 1-3/ olt Type s vary according to quantity ordered /8 S M L SNP OLT 36 3/4 may apply to Special and ustom finishes. P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all Special inish 53/64 R. 1-7/16 2 STRI RONT VIW 1-1-3/16 STRI SI VIW 1- STRI 3/16.83 ey Retaining N No Std. Note: eys are not included with this lock. See page 14 to order keys. STRI TOP VIW /16 5/16 7/16 9/ I. 1/ ISOMTRI VIW enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
9 ata Sheet enstan L O O M P N Y eymatic Line 7 PL40 To determine your item number enter the R option PL 40 S3 PN Y PL ore Type eymatic Housing Style 40 Oval lange S SRIS ll dimensions shown are in the locked position. Plunger Type/Length S SRIS S1 $27.75 S2 7/ S T SRIS T1 1/ T3 9/ ROUN SRIS R R2 7/ R3 9/ ROUN XTN SRIS R4 1-3/ R5 1-5/ R6 1-11/ R7 2-7/ s vary according to quantity ordered. 1-1/4 S1 S2 S3 3/16 THRU 7/8 1-7/8 2 T SRIS 1- T1 T3 1/16 STRI PLT may apply to Special and ustom finishes. P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all Special inish ey Retaining N No 1.25 Y Yes Std. ROUN SRIS 1 R1 R2 R3 1/16 Note: eys are not included with this lock. See page 14 to order keys. ROUN XTN SRIS (Plunger travels 9/16 ) 1 R4 R5 R6 R7 1/4 XTNSION IMTR PLUNGR IMTR XTNSION PIN WILL NOT RTRT INTO HOUSING enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
10 8 PL45 eymatic Line enstan L O O M P N Y ata Sheet To determine your item number enter the R option PL 45 S3 PN Y PL ore Type eymatic S SRIS ll dimensions shown are in the locked position. Housing Style 45 No lange Plunger Type/Length S SRIS S1 $28.29 S2 7/ S T SRIS T1 1/ T3 9/ ROUN SRIS R R2 7/ R3 9/ ROUN XTN SRIS R4 1-3/ R5 1-5/ R6 1-11/ R7 2-7/ s vary according to quantity ordered. 7/8 T SRIS 1-1/4 S1 S2 S3 T1 T3 #4-40 (STNR) may apply to Special and ustom finishes. 1/16 Special inish P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all ROUN SRIS 1- R1 R2 R3 ey Retaining N No 1.25 Y Yes Std. Note: eys are not included with this lock. See page 14 to order keys. ROUN XTN SRIS (Plunger travels 9/16 ) 1- R4 R5 R6 R7 1/4 XTNSION PIN IMTR PLUNGR IMTR PIN XTNSION PIN WILL NOT RTRT INTO HOUSING enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
11 ata Sheet enstan L O O M P N Y eymatic Line 9 PL49 To determine your item number enter the R option PL 49 X PN Y PL ore Type eymatic THROUGH TH TR PLUNGR Throw (distance bolt travels from the locked to unlocked position) is 7/16. ll dimensions shown are in the locked position. Housing Style 49 Through the Track $39.95 Plunger Plunger Type X No Option may apply to Special and ustom finishes. ustom inish all s vary according to quantity ordered /16 5/16 7/16 9/32 15/32 27/64 1/32 ey Retaining N No 1.25 Y Yes Std. 19/32 Note: eys are not included with this lock. See page 14 to order keys. ISOMTRI VIW WITH MTL TR 13/16 enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
12 10 PL50 eymatic Line enstan L O O M P N Y ata Sheet To determine your item number enter the R option PL 50 S3 PN Y PL ll dimensions shown are in the locked position. ore Type eymatic Housing Style 50 Round lange S SRIS (Parts included same as Round Series) 1-1/4 S1 S2 S3 1- Plunger Type/Length S SRIS S1 $36.67 S2 7/ S T SRIS T1 1/ T3 9/ T SRIS L ROUN SRIS R R2 7/ R3 9/ ROUN XTN SRIS R4 1-3/ R5 1-5/ R6 1-11/ R7 2-7/ may apply to Special and ustom finishes. P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all Special inish ey Retaining N No 1.25 Y Yes Std. Note: eys are not included with this lock. See page 14 to order keys. s vary according to quantity ordered. 7/8 a PLUNGR IMTR c 1- T SRIS INSTLLTION b T SRIS 1- L SRIS L3 RONT GLSS d T1 T3 R1 R2 R3 c 1/16 R4 R5 R6 R7 STRI PLT 1/16 e 7/8 ROUN SRIS (Plunger travels 9/16 ) 1.19 HOL IMTR XTNSION PIN WILL NOT RTRT INTO HOUSING e f 1/4 XTNSION PIN IMTR d c 7/8 RR GLSS c a PRTS INLU QTY. a OUGHNUT 2 b J RT 1 (anti-rotation) c PLSTI WSHR 4 d PLSTI SPR 2 e SRW 8 f STRI PLT 1 PRTS INLU QTY. a OUGHNUT 1 b J RT 1 (anti-rotation) c PLSTI WSHR 2 d PLSTI SPR 1 e SRW 4 PRTS INLU QTY. a OUGHNUT 1 c PLSTI WSHR 2 d PLSTI SPR 1 e SRW 4 a OUGHNUT b J RT (anti-rotation) c PLSTI WSHR d PLSTI SPR e SRW f STRI PLT enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
13 ata Sheet enstan L O O M P N Y eymatic Line 11 PL51 To determine your item number enter the R option PL 51 6 PN N PL ore Type eymatic Housing Style 51 ey Hole Lock SHORT PLUNGR ll dimensions shown are in the locked position. Material Thickness/Plunger 3,4 MTRIL THINSS PLUNGR LNGTH SHORT /4 3/4 Std. $ LONG /4 1- Std /8 1-1/ may apply to Special and ustom finishes. P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all Special inish s vary according to quantity ordered. 1 LONG PLUNGR 1- MTRIL THINSS 6,7,8 MTRIL THINSS PLUNGR LNGTH 1/4 PLUNGR LNGTH ey Retaining N No Std. Y Yes 0.00 Note: eys are not included with this lock. See page 14 to order keys. Y HOL LO XPLO VIW a c MTRIL c d e a c d e HOUSING RUR WSHR PLT MOUNTING SRWS enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
14 12 ZL38 eymatic Line Z olt Lock enstan L O O M P N Y ata Sheet To determine your item number enter the R option ZL 38 Z1 PN Y ZL Z olt Lock ore Type Housing Style eymatic SMLL HOUSING ll dimensions shown are in the locked position. 38 Sliding oor ead olt 9/16 Plunger Type/Length OLT THINSS SMLL HOUSING OLT Z1 5/16 Std. $25.85 Z Z3 13/ LRG HOUSING OLT Z5 5/16 Std Z may apply to Special and ustom finishes. Special inish P Polished rass 3.35 S Satin rass 3.35 L Matte lack 3.35 ST Statuary ronze 3.35 ustom inish all s vary according to quantity ordered. 7/8 Z1 Z2 Z3 LRG HOUSING 7/16 3/4 1 3/4 1 ey Retaining N No 1.25 Y Yes Std. 1-3/16 OLT THINSS Note: eys are not included with this lock. See page 14 to order keys. 1- Z5 Z6 1-7/16 7/16 3/ /16 enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
15 ata Sheet enstan L O O M P N Y eymatic Line Ratchet Lock 13 RL To determine your item number enter the R option RL 60 1 PN N RL Ratchet Lock ore Type JUSTL R 2 4-1/4 eymatic 1- Housing Style 60 Ratchet ar Type 1 Standard $ djustable Stick on Screw on s vary according to quantity ordered. 1-1/16 3/4 MX. GLSS THINSS may apply to Special and ustom finishes. ustom inish all ey Retaining 1 MINIMUM 3- MXIMUM N No Std. JUSTL R 5 Note: eys are not included with this lock. See page 14 to order keys. 2-1/4 STNR R 1 1/4 MX. GLSS THINSS /4 11/16 JUSTL R 6 2-7/16 1-3/4 9/ MINIMUM 3- MXIMUM 7/8 enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
16 14 Y eymatic Line ey enstan L O O M P N Y ata Sheet eymatic Tubular eys eymatic locks utilize industry standard 137 tubular keys combined with non-industry standard size cuts. Standard tubular keys are cut on a machine using a.156 diameter size cutting blade; enstan uses a N milling machine and.093 size cutter to meet our tight tolerances and avoid cutting the key tip and degrading the key. typical lock shop may be capable of producing a workable duplicate key, but the enstan warranty will be void if our actory Original keys are not used with our locks. Use of unauthorized duplicates will inevitably cause the lock to become misaligned and possibly suffer irreversible damage. enstan Original eymatic operating keys and hange Tools can be ordered by referencing the stamp number on the keys. The first two letters represent a manufacturing date code and the next 3 or 4 numbers represent the eymatic key code. The final dash and number from 1 to 8 represent the setting within the key code for operating keys only. ll operating keys starting in late 2003 come standard with a colored key cover representing dash numbers 1 thru 8. The hange Tool does not have the final dash and number; the large red stop sign shaped cover notes the special purpose of changing the eymatic lock setting only. If keys have been lost or stolen, you can reference the eymatic code number stamped on the lock housings, cams or bolts. # 01 (Orange) OPRTING Y # 03 (Yellow) OPRTING Y # 05 (White) OPRTING Y # 02 (lue) OPRTING Y # 04 (Green) OPRTING Y # 06 (Pink) To determine your item number enter the R option Y 01 XXXX OPRTING Y # 07 (Purple) OPRTING Y # 08 (Tan) Item Y ey ore Type eymatic Operating ey/hange Tool 01 Orange $ lue Yellow Green White Pink Purple Tan 3.65 TOOL Red hange Tool 5.85 R HNG TOOL TOOL ey ode XXXX Specific Up to 4 digits ny enstan assigns enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
17 Volume 5 enstan L O O M P N Y Terms and onditions of Sale 1. Pricing: enstan Lock reserves the right to institute price adjustments based upon fluctuation of material costs without prior notice. Orders, or balances of orders, that have not shipped within 6 months from the original order date may be subject to a price review. 2. Payment Terms: Payment must be made at time of purchase, unless otherwise approved by enstan with terms of Net 30 ays from the date of the invoice. service charge of 1.5% per month will be charged on overdue accounts. 3. Shipping: Please be sure to specify your preferred shipping method on every order. or all orders received without shipping instructions, enstan will use our discretion to make carrier selection based upon the most economical method of shipment available to meet your required in house date. enstan is not responsible for risk of loss or damage to products in transit with the selected carrier. 4. eliveries: t enstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within two weeks from the receipt of your order. Rush orders and emergency services are available. Unless specifically prohibited in writing by the purchaser, enstan reserves the right to make partial shipments of any order. 5. Inspection: enstan Lock inspects all products in accordance with our standard quality control procedures. Upon receipt and inspection by the purchaser, any parts proven to be defective or not as ordered may be returned to enstan for repair or replacement following the conditions in the Returned Goods section (#6) below. 6. Returned Goods: Product replacement or account credit for any returned goods will be made solely at the discretion of enstan and will only be accepted upon the issuance of a Return uthorization number from enstan s ustomer Service epartment. Merchandise proven to be defective, due to faulty material and/or workmanship, may be returned for full replacement or credit. ny product ordered incorrectly by the customer may be accepted for return and subject to a 50% handling charge. Locks made with special or out-of production parts are not returnable, unless prior arrangements have been made. Returned merchandise that is damaged in transit, due to inadequate return packaging, will not be accepted. 7. Warranty: enstan Lock warrants, for a period of one year from delivery, that our products are free from defects in material and workmanship and makes no other warranties, expressed or implied, including but not limited to the degree of security or the purchaser s application or use of our product. enstan Lock o. will not warranty any locks or parts that were modified outside of our factory. In the event of a product defect, enstan shall only be responsible to the extent of the cost of our product, and will not accept any claims for labor or loss of merchandise. 8. ancellation: If all or any part of an order is cancelled before the completion of the product assembly by enstan, the purchaser shall be responsible for payment of all assembled items as well as any special parts ordered for items remaining unassembled at the time of cancellation. If pricing on the original order was based upon enstan s quantity discount, a partial cancellation may affect the pricing on items already shipped and invoiced and a price adjustment will be made. 9. atalog imensions and Sample Policy: Please be aware that all lock and part drawing dimensions carry a tolerance of plus or minus 1/16 and are for reference only. Please contact us for actual dimensions. ll specifications are subject to change without notice. Samples products are available upon request. enstan Lock ompany 101 ommercial Street, Plainview, NY P info@enstan.com W
Kenstan. Volume 5. Knob Line of Locks. Introduction. Cam Locks. Drawer/Door Locks. Snap Bolt Lock. Plunger Lock PL40.
Volume 5 a t a l o g L O K O M P N Y of Locks 2 S V Introduction 1 am Locks 2 3 rawer/oor Locks 4 Snap olt Lock 5 PL40 6 PL45 7 PL50 8 L O K O M P N Y List and ata Sheet Introduction 1 of Locks Standard
More informationKenstan L O C K C O M P A N Y. Strikes and Mounting Plates. Mounting Plates and Gang Lock Hardware. Ratchet Bars and Miscellaneous
Volume 5 C a t a l o g L O C K C O M P N Y ccessories 2 S V E X Face Sleeves, Collars and Spacers 1 Spacers and Washers 2 Washers and Strikes 3 Strikes and Mounting Plates 4 Mounting Plates 5 Mounting
More informationButt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
More informationDOUBLE ENVELOPING WORM GEAR SETS
OUL NVLOPIN WORM R STS 172 one rive Product atalog and ngineering Manual ouble nveloping Worm ears & Speed Reducers ontents one rive ear Sets...173 one rive ear Sets - Tables of acklash... 174 one rive
More informationDOOR STOPS & HOLDERS DOOR TRIM & ACCESSORIES DOME DOOR STOPS CONVEX & CONCAVE WALL STOPS WALL MOUNTED DOOR STOPS ORDERING EXAMPLE: -26D C200 SERIES
OOR STOPS & HOLRS OOR TRIM & SSORIS OM OOR STOPS 00 8 9 Mounting hardware included inish: satin chrome (6) MOL NUMR 00 8 9 MTRIL Zinc die-cast 6 5/6 (4) 5/6 (33) 7/6 (36.5) /6 (7) I 3/4 (44.5) 7/3 () 7/3
More informationSection VIII Hydraulic Tooling
Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS
More informationPKD Series - Page K14. Alcoknob. Alcoknob
lcoknob Series - Page 4 Series - Page 5 Series - Page 6 LNS Series - Page 8 N Series - Page 8 P Series - Page 13 P Series - Page 14 lcoknob atalog 1308390 imensions are in inches imensions are shown for
More informationBackwater Valves Series swing-check Backwater Valve shown installed in a manhole terminal.
ackwater Valves 259 67800 Series swing-check ackwater Valve shown installed in a manhole terminal. 260 ackwater Valves JOSAM 67100A OAT AST IRON AKWATR, PLASTI ALL-LOAT, LASTOMR SAT, RONZ AG AN OTTOM OUTLT
More informationMONOGRAM 42" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION STNR INSTLLTION 25 1/2" (64.8) 42" (106.7) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3)
More informationhat channel purlins B SCREW PATTERNS: DOUBLE SCREW PATTERN ON UPPER AND LOWER ROOF PURLINS (FOR ROOF PANELS).
6.2.524.524.524.524.524.524.524.524.524.524.524.524.524.524.524 3.2 +3.920 +3.094 note: dimensions including sheet metal transparent polymer panels, glass fiber enforced roof metal panel +3.920 +3.094
More informationMONOGRAM 36" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 36" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION MONOGRM 36" UILT-IN SI-Y-SI RRIGRTOR OVRLL IMNSIONS STNR INSTLLTION 25 1/2" (64.8)
More informationCabinet Locks & Latches
SECTION INEX TIMERLINE LOCK SYSTEMS OVERVIEW...-2 CM LOCKS Horizontal Mount...-3 Vertical Mount...-4 Cam Lock Kit with 4 Cams...-5 Thick Panel Cam Locks...-5 EOLT LOCKS Horizontal Mount...-6 Vertical Mount...-7
More information441 SERIES POWER ADJUSTABLE DOOR CLOSERS
441 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 1 to 6 Universal retrofit hole spacing actory preset to size 3 Power adjustable arm bracket Tri-pack for regular, parallel arm and top jamb
More informationContents - Sliding Track
ontents - Sliding Track SLIING TRK Track Series 120 2 Track Series 200 2 Track Series 450 2 Track Series 650 2 HNGRS 2 Wheel Hangers 2 4 Wheel Hangers 2 SLIING OOR HRWR Top Plate ssembly 3 SI FIX RKTS
More information4 POL 4 POL 8 POL 8 POL. CONNECTOR SPECIFICATION / Steckverbindungs-Eigenschaften L =[mm] see table TABLE 1
POL 0.0 L =[mm] see table. POL 0/0/0 00 URGR 0/0/0 RUNS NO: RWN: HK': PPR: RV M x.. M x. POL POL ONNTOR SPIFITION / Steckverbindungs-igenschaften 0V / VOLTG RTING/etriebsspannung 0V / FORMT: tb-prod- RVISION:
More informationCONNECTIONS MADE SIMPLE
ONNTIONS M SIMPL omplies with all federal & state low lead laws No more solder, glue, clamps, costly tools or clean-up! Push-on connection to copper, PV or PX asily recover from installation & deburring
More informationSECTION CABINET LOCKS PART 1 GENERAL
SECTION 06414 CABINET LOCKS PART 1 GENERAL 1.1 SECTION INCLUDES A. Locks for drawers, swinging doors, and sliding doors of, including: 1. Drawer and Door Cam Locks. 2. Drawer Gang Locks. 3. Door and Drawer
More informationVertical Multi-stage Pumps - 60 Hz.
P erk.qxd 1/5/6 3:24 PM Page 1 Vertical Multi-stage Pumps - 6 Hz. PVM - ast Iron PVMI - 34 Stainless Steel PVMX - 316 Stainless Steel Models low Series HP Range GPM PVM/PVMI/PVMX 2 1/2 5 1 2 PVM/PVMI/PVMX
More informationMonogram 36" Built-In Side-by-Side Refrigerator
Monogram 36" uilt-in Side-by-Side Refrigerator STION 1 LUSH INST INSTLLTION STION 2 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS OVRLL IMNSIONS TR PNL INSTLL LUSH INST INSTLLTION 38" (96.5) 26" (66.0)
More informationSupply and exhaust ventilation of various premises. Formation of flat air ductworks.
Flt ut Applition Supply n xhust vntiltion o vrious prmiss. Formtion o lt ir utworks. M o whit PVC. Siz: 55x110, 60x122, 60x204 mm. ut lngth rom 350 to 2500 mm. Connt with mthing onntors. 1 1 50035 55 110
More informationISOMETRIC VIEW SCALE: 1/2
NOTS:.. THIS RWING SRIS TH UL xx SRIS LTRONI UL PUMP. UNLSS OTHRWIS SPII, LL VIWS R MOLS -c, -c OR -c. TURS INLU: - THR PHS RUSHLSS MOTOR WITH NOYMIUM MGNTS - INTGRT LTRONIS WITH SP ONTROL - WT MOTOR SIGN,
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationMONOGRAM 42" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STION 1 STNR INSTLLTION 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST INSTLLTION MONOGRM 42" UILT-IN SI-Y-SI RRIGRTOR STNR INSTLLTION 25 1/2" (64.8) 42" (106.7) 23
More informationMONOGRAM 36" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
STION 1 STNR 1/4" RM PNLS 3/4" OVRLY PNLS STION 2 LUSH INST OVRLL IMNSIONS STNR 25 1/2" (64.8) 36" (91.5) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3) *84" (213.4) *83 1/2" (212.1) 68 1/2" (174.0) *72 1/4"
More informationFERRITE CORE SIZE / SHAPE CATALOG
RRIT INTRNTIONL TS INTRNTIONL OMPNY RRIT OR SIZ / SP TLO ORRIN N PRT NUMRS MTRIL SURVY < 20 20 30 30 40 40 50 > 50 PLNR R R PLNR T P U UR PQ RM M POT ores SL ores UP ores Toroid < 15 Toroid 15 25 Toroid
More informationMATERIAL SPECIFICATIONS STYLE PG THREE-HOLE RECTANGULAR STYLE PG STYLE PG THREE-HOLE RECTANGULAR
ROMC HRNSS S HRNSS : STM 36 Steel, profile shape cut with plasma arc or oxy-fuel. Holes plasma arc cut or drilled. Stainless steel optional. TI-S: ll Thread Rod. lloy steel per STM 193 Grade 7. Stainless
More informationCabinet Hardware LIST PRICES. effective January 1, 2008
2008 2007 2 0 0 8 Cabinet Hardware LIST PRICES effective January 1, 2008 TERMS Unless otherwise mutually agreed upon in writing, Seller s terms for all products sold are Net 10th End of Month. All invoices
More informationLATHE TOOLHOLDER BUSHINGS
HUK JWS LTH WORKHOLING MHIN VISS VIS JWS RTNTION KNOS R,, TG OLLTS TOOLHOLRS TP HOLRS INXL RILLS TURNING & ORING NMILLS, RILLS TPS & RMRS RSIVS MSURING TOOLS MRO & STY LT STOK/RILL RO LTH TOOLHOLR USHINGS
More informationES100 plus. 550mm WIDTH. 813mm BASE LENGTH. 933mm SLIDE TRAVEL LOWERS. 290mm. 738mm TRAY LENGTH. 390mm TRAY WIDTH
LOWRS 290mm 1 2 550mm WITH 9mm SLI TRVL 81mm S LNGTH 90mm TRY WITH 78mm TRY LNGTH UNLSS OTHRWIS SPII: IMNSIONS R IN MILLIMTRS SUR TOLRNS LINR: NGULR: SIGN IL LOT: :\Users\learview\ocuments\SY SLI\V-S79
More informationRODLESS GANTRY RAIL PNEUMATIC SLIDE
ROLSS GNTRY RIL PNUMTI SLI Major enefits Space-saving design Smooth, precise movement High load capacity with very low deflection Improved moment capacity Two bore sizes offered ( and mm) Long travel lengths
More informationPower Operated Benders Hand Operated Benders CONTENTS
Power Operated Benders Hand Operated Benders CONTENTS Power Operated Benders... 2 No.6 Power Bender Set-up... 3 No.8 Power Bender Set-up... 4 Hand Operated Benders... 5 Bender Specs, Accessories & Tooling...
More informationTable of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
More informationGE Monogram 48" Built-In Side-by-Side Refrigerator
OVRLL IMNSIONS 25 1/2" (64.8) 48" (121.9) 23 7/8" (60.7) 1 3/4" (4.4) 13 1/2" (34.3) *84" (213.4) *83 1/2" (212.1) 68 1/2" (174.0) *72 1/4" (183.5) *40" (101.6) SPIITIONS Overall Width Overall Height Overall
More informationMilitary Series. Electronic Hardware Corporation 320 Broad Hollow Road, Farmingdale, NY Round. Skirted Round. Dial. Pointer.
0 Round ; NUT LRN MS958 White Plain Top ot iam. eight iam. epth 0N 0.500.50.5.06 N.700.60.85.06 N.900.790.60. N.50.700.750. N.750.850.750. 5N 5.50.875.750. TO OMPLT PRT NUMR N - Skirted Round ; ; NUT LRN
More informationhow cabinet locks are used
Through your CompX Chicago distributor... a program to meet your lock requirements. CompX Chicago manufactures a wide variety of locks for residential, commercial and industrial use. We ve been solving
More informationDO NOT SCALE DRAWINGS firstfence.co.uk
0283 52 0283 480 522 sales@firstfence.co.uk firstfence.co.uk 656 Mesh encing 656 ouble Wire encing Panels Overview 800MM HIGH 656 TWIN MSH NING 0MM HIGH 656 TWIN MSH NING 2400MM HIGH 656 TWIN MSH NING
More informationBROCHURE IP BI-TORQ Valve Automation PO Box 309 1N050 Linlar Dr. La Fox, IL tel: fax:
ROHUR IP-209-0 I-TORQ Valve utomation PO ox 309 N050 Linlar r. La ox, IL 6047 tel: 630-208-9343 fax: 630-232-6235 www.bitorq.com 2-WY RSS VLVS /4 TO 4 LMP N SNITRY VLVS /2 TO 4 PGS 4-5 ITORQ.OM/IP.HTML
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationCLAMP INSTALLATION GUIDE
PL SRIS LMP INSTLLTION GUI "HOL OWN" LMP INSTLLTION 1. rill and tap two M5X0.8 threaded holes in the base plate in each location you wish to install a clamp (reference the PL catalog for information on
More informationINSTALLATION INSTRUCTIONS FOR M.O.R.E. SHACKLE REVERSAL SYSTEM (S.R.S. ) PART # THIS SYSTEM FITS Jeep CJ-5, CJ-7, CJ-8 VEHICLES.
MOUNTAIN OFF ROAD ENTERPRISES LLC. P O BOX 690, DELTA, COLORADO 81416 970-625-0500 www.mountainoffroad.com INSTALLATION INSTRUCTIONS FOR M.O.R.E. SHACKLE REVERSAL SYSTEM (S.R.S. ) PART # 7686-5 THIS SYSTEM
More informationQuality Aftermarket Parts for Lift Equipment Now Order Parts Online pcaerialparts.com
Quality Aftermarket Parts for Lift Equipment Now Order Parts Online TERMS & CONDITIONS Prices and Payment Terms: Please note prices and terms are subject to change without notice. TABLE OF CONTENTS JLG...
More informationFull Range of Brackets
ull Range of rackets Matching ittings Stocked Sizes e supply matching nd ittings also. e stock all the brackets listed ready for If you require customised brackets we can manufacture them - please get
More informationSport Sway Bar Kit (22425) Scion tc
Sport Sway Bar Kit (22425) Scion tc Thank you for your purchase from our new line of Scion tc parts. Please call us at (877) 4NO - ROLL if you have any questions regarding the service or installation of
More informationMicro-D Metal Shell -.050" Contact Spacing
Micro Metal Shell.050" ontact Spacing Specifications connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than
More informationMEX (55) QRO (442) Web Controls
Web Controls SINGLE AND DUAL ROTOR TENSION CONTROL BRAKES MODELS:,,,, AND INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS Read this manual carefully, making full use of its explanations and instructions.
More informationG1L SERIES. Lockset has non-removable steel thru bolt mounting posts Stainless steel 1/2 (13mm) deadlatch bolt throw Standard 1 1/8 (29mm) x 2 1/4
Non-handed Standard backset 2 3/4 (70mm) Standard solid brass 6-pin tumbler cylinder Schlage keyway oncealed mounting plate and screws For doors 1 9/16 (40mm) to 2 (51mm) door thickness G1L SRIS HVY-UTY
More informationBROADBAND EMI FERRITE SPLIT / SNAP-ON CORES IN PLASTIC CASES
RODND EMI FERRITE SPLIT / SNP-ON ORES IN PLSTI SES FOR ROUND LES & WIRING HRNESSES For retrofit and post-assembly operations, Laird Technologies offers a selection of split cores. Similar in performance
More informationHigh Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
More informationA FORMAT: Met-lega-master-tb-prod-A3 REVISION: C DATE: 2017/02/06
RL WITH OMPON UL SHT(S) (QTY. VRIL) LL PRT NO. QTY. O TP PRTS ORINTTION RFR TO SHT RO LL NO. OF RLS WITH M G (QTY. VRIL) RL WITH OMPON NTR UL SHT(S) (QTY. VRIL) 0.0 MOSS TP RO LL NO. OF RLS WITH M G (QTY.
More informationGLYCOL SYSTEM MONITOR (GSM)
GLYCOL SYSTEM MONITOR (GSM) The Future of Beer System Diagnostics Glycol cooling systems are typically overlooked by most resturaunts. However, when the unit(s) are performing poorly or there is a component
More informationAnti-roll bar set Chrysler Magnum, Charger, 300C, SRT Dodge Challenger
Anti-roll bar set 22101 Chrysler Magnum, Charger, 300C, SRT-8 22107 Dodge Challenger Thank you for your purchase from our new line of Chrysler parts. Please call us at (877) 4NO-ROLL if you have any questions
More informationSECTION C-C SCALE 1 / 2 SECTION E-E SECTION AT-AT SCALE 1 / 2 SCALE 1 / 2 SECTION F-F SCALE 1 / 2 SECTION M-M SCALE 1 / 2 DETAIL D SCALE 2 : 1
RVIS PRT SRIPTION IN OM, TO MK - //0 Y.LI IT LRR 6 dded fillet at bottom of PM pocket in item. //0 TIO 4. R. dded a new part # //0 Y.LI T 4 (.7) Revised welding note at etail View /6/0 Y.LI WTR TIGHT Ø6.7
More informationAPPLICATIONS FEATURES TEST INSTRUMENTS L.Q : HP HP 42851A SRF : HP 4287A SRF RDC : CHEN HWA502BC IDC : CHEN HWA CH A COLOR
HOK OILS L TYP L TYP Series PPLITIONS For VRs, olor TVs, RTs, Stereo ar Radios and Radio Transceivers, Telephone nswering, isk rivers, Personal omputers and Industrial lectronics Products, etc. FTURS PROUT
More information9. EXPLODED VIEWS AND PARTS LIST
1 2 3 4 9. XPLO VIWS N PRTS LIST NOTS: - Parts marked by NSP are generally unavailable because they are not in our Master Spare Parts List. - The > mark found on some component parts indicates the importance
More informationPFF SERIES FLANGED NETWORK PLASTIC BOX
PFF SERIES FLANGED NETWORK PLASTIC BOX Thnil Dt Prottion lss: IP40 Oprting tmprtur: -10 C ~ +60 C 1 Nw PF plsti s with wll mounting flng ottom dsign. Md of flm-rsistnt ABS UL94V-0 nd vill in off-whit olor.
More informationAir Handlers Series. Direct-Fired Heating Pressurization. Dimension and Selection Guide
2000-Series ir andlers irect-ired eating Pressurization imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% OUTSI IR ONLY 2000-Series Selection uide IMPORTNT NOTS: ll information
More informationBMW E46 M3 SPORT SWAY BAR SET # 22826
BMW E46 M3 SPORT SWAY BAR SET # 22826 Thank you for your purchase from our new line of BMW E46 parts. Please call us at (877) 4NO - ROLL if you have any questions regarding the service or installation
More informationBELT CONVEYOR SECTION CONTENT. Bolt-Together Straight Bolt-Together Incline/Decline Welded Straight Belt Curve Optional Equipment and Devices
LT ONVYOR STION ONTNT olt-together Straight olt-together Incline/ecline Welded Straight elt urve Optional quipment and evices 15 LT ONVYOR WHY? Provides the most versatile means of handling a wide variety
More informationV Mesh Fencing DO NOT SCALE DRAWINGS firstfence.co.uk
0283 52 0283 480 522 sales@firstfence.co.uk firstfence.co.uk V Mesh encing MM X M PROIL NING PNLS OVRVIW 800MM HIGH V MSH NING 0MM HIGH V MSH NING 20MM HIGH V MSH NING MM HIGH V MSH NING O NOT SL RWINGS
More informationDOCUMENT STATUS: CORE HEALTH & FITNESS, LLC IP-S1313-XXXXS REVISION HISTORY NOTES: 1864 G MATERIAL SEE BOM
RVSON STORY RV T SRPTON O Y 0-4-0 RLS OR PROUTON 5 MM. SSMLY N NSPTON PR SOP 0-.. NSTLL Kg. STKR N X Lb. STKR TO NS O SROU WT TP. -04-0 NS TRU PLOT PROUTON -- S O O OR TLS 30 MM 03-3-0 3-044 N 3-, TS S
More information16385 Steering Tie Rods Chrysler A-Body
16385 Steering Tie Rods 1967-76 Chrysler A-Body Before You Start: Thank you for your purchase from our new line of B & E-Body parts. Please call us at (877) 4NO - ROLL if you have any questions regarding
More informationLinear Actuator. Installation Manual. warranty installation parts list. Linear Actuator Installation Manual Page 1
Linear Actuator Installation Manual warranty installation parts list January 2004 Linear Actuator Installation Manual Page 1 MA1221B12 Warranty Information Chore-Time Equipment ( Chore-Time ) warrants
More informationLocks, Latches & Vents. Leaflet No. A10.2
I N U S T R I L M N U T U R I N S I N 1 9 2 3 Leaflet No. 10.2 Locks, Latches & Vents I N U S T R I L M N U T U R I N S I N 1 9 2 3 Who we are Rencol s flexible manufacturing capabilities, engineering
More informationTABLE OF CONTENTS PRODUCT PART # PAGE PRODUCT PART # PAGE
TABLE OF CONTENTS PRODUCT PART # PAGE CABINET LOCKS Pin Tumblers 0737 3 0738 3 0370B 4 Disc Tumblers 02067 4 Combination D900, D901 39 CAM LOCKS Pin Tumblers 15748, 15749, 15750 10 15783 & 15890 11 C-510-XS
More informationGP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
More informationCRUSHER TRUE DUAL HEADPIPES 513
CRUSHER TRUE DUAL HEADPIPES 513 THANK YOU FOR CHOOSING CRUSHER! PROTECT YOURSELF AND OTHERS FROM POTENTIAL INJURY AND PROPERTY DAMAGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS,
More informationSonoran Roller Shade. Retail Price List
Sonoran Roller Shade Retail Price List Effective September 15, 2014 Terms and Conditions Order Processing Telephone Orders Verbal orders are accepted as the dealer's responsibility. Each order will be
More informationHepcoMotion. HTS telescopic ball bearing slides
HepcoMotion HTS telescopic ball bearing slides ontents Introducing the HepcoMotion HTS eature and enefits 1 ONSTRUTION 2 XPLNTION O TRMS Load Rating 2 Load Rating and uty ycle 2 Safety 2 Travel (xtension)
More informationCRUSHER MAVERICK 2 INTO 2, BLACK 566
CRUSHER MAVERICK 2 INTO 2, BLACK 566 THANK YOU FOR CHOOSING CRUSHER! PROTECT YOURSELF AND OTHERS FROM POTENTIAL INJURY AND PROPERTY DAMAGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS,
More informationq u i e t price list march 2018
q u i e t price list march 201 quiet terms and conditions Sales and Service Policy uidelines detailing the operating policies and procedures of Bernhardt Design are provided in the Sales and Service Policy
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS
INSTLLTION INSTRUTIONS FOR PRT 99-7506 KIT FETURES IN Head Unit Provision with pocket ISO IN Head Unit Provision with pocket ouble IN Head Unit Provision Stacked ISO IN Head Unit Provision Painted Matte
More informationInstrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
More informationINSTALLATION MANUAL STEP SLIDER BD-SS-200-JK4. Made in the USA. Front Bracket Middle Bracket Rear Bracket. Tools Required
Made in the USA INSTALLATION MANUAL STEP SLIDER BD-SS-200-JK4 Description Quantity Electric Step Slider (Pair) 2 Front Bracket Middle Bracket Rear Bracket Bump stop plate with VHB backing 2 Wiring harness
More informationGIGABIT MAGNETIC JACK 1x1 LED
GIGIT MGNTI JK x L MOLX -XXXX WW YY Z FRONT VIW NON L VRSION P/N -00 NOTS: - SHIL MTRIL: STINLSS STL (GROUN PINS R SOLR IPP) - PLSTI MTRIL: PT, LK, UL V-0 - RJ TRMINLS MTRIL: OPPR LLOY ONTT PLTING: 0.
More informationSonoran PVC. Evolution Fabric
Sonoran PVC & Evolution Fabric Vertical Blind Collection Retail Price List Effective June 1, 2017 Pattern Listing PVC Vanes Pattern Free Hang Content Price Group FR Aztec Yes PVC E Yes Beacon Yes PVC D
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
More informationMODEL E/R B-VENT CHIMNEY
MNUTURING XLLN HV Steel uct Pipe & ittings MOL /R -VNT HIMNY Type Gas Vent 3" 8" O is proud to be a member of: SMN Sheet Metal and ir onditioning ontractors National ssociation www.smacna.org HRI Heating,
More information24 MULTI-POINT LOCKING SYSTEM CASEMENT
SEMENT 4 MULTI-POINT LOKING SYSTEM STYLISH & EFFIIENT With its sleek, low-profile design, homeowners will love the fact that in either the locked or unlocked position it doesn t interfere with curtains
More informationInstallation Instructions and Warranty Information
Installation Instructions and Warranty Information For JBA Headers 1997-2004 Chevrolet Corvette and z06 LS-1 / LS-6 V-8 Part# Application 1817 97-99 with 1-5/8 tube 1817-1 01-04 with 1-5/8 tube 1817-2
More information2025F / 2072F / 2073F
Operation & Installation Guide F / F / F Manual # M-- Digital nti-theft Safe Manual # M-- Index / Overview of Your Safe Index Overview of Your Safe Package contents Overview of Your Safe... Initial Set
More informationHand Crank & Brake Assembly. 12V 1 /3 hp Motor. See Page 128 for Reel Dimensions & Sizes. (lengths over 100' are spliced)
ooster The kron rass ooster Reel is designed to be light weight and extremely durable. There are more options than ever as these reels are available in multiple sizes, and in both electric and manual rewind.
More informationVG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A.
Series onnectors V95351 and V96934 Qualified onnectors V95351 and V96934 Qualified Products bout The V Specifications The erman ederal Office of efense Technology and Procurement (W) establishes procurement
More informationCOVER & SHEET INDEX. Pico-Union Mixed-Use Project 1659 W 11th St, Los Angeles, CA ARCH 405aL FALL 2015 NICK HALSEY SHEET INDEX
NO. TITL INX RH 405aL LL 205 Pico-Union Mixed-Use Project 659 W th St, Los ngeles, 9005 60 OVR & INX 602 PROGRM UL IGRM 603 STRUTURL LULTIONS (GRVITY) 604 STRUTURL LULTIONS (WIN) 605 LVL 2 STRUTURL RMING
More informationType PRIME MOVER CONTROLS INC. DIGITAL TACHOMETER SYSTEM APPLICATIONS
PROUT ULLTIN S 811000 Type 811000 IGITL THOMTR SYSTM PPLITIONS Monitoring Speed and irection of Rotation of: iesel ngines Gas Turbines Propeller Shafts lectric Motors Speed rives ow Thrusters Pumps TURS:
More informationTEPHEN TEPHEN LUBRICATION LUBRICATION SYSTEMS
LURITION SYSTMS LURITION LURITORS N OILRS LURITION QUIPMNT PROUT RNG rip Feed Lubricators range of gravity and forced feed oilers for lubricating single or multiple points and for use in conjunction with
More informationAnti-Roll Bar Set # 2279, Cadillac CTS V6 & CTS-V
Anti-Roll Bar Set # 2279, 2280 2003+ Cadillac CTS V6 & CTS-V Thank you for your purchase from our new line of CTS parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service
More informationwith one normally open and one normally closed circuit. Can be furnished with wide and long mountings.
Single Pole Standard nvironment Limit Switches utt ontacts 080 Single pole, double throw, heavy duty limit switch having mechanical travel of 10 to trip and with one normally open and one normally closed
More informationVG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES
V95351 and V96934 Qualified onnectors Series onnectors V96934 TN PIN ONNTORS N SSORIS V96934 STYL ONIURTION SRIPTION P STYL able plug with two piece shielded backshell Page 30 STYL lange mount receptacle
More informationModel AS-FM64 Wall Mount. Full Motion Television Wall Mount
Model AS-FM64 Wall Mount Full Motion Television Wall Mount Getting Started Introduction Congratulations on the purchase of your new Audio Solutions AS-FM64 Television Wall Mount. For maximum benefit, please
More informationToyota/Lexus A340E, A340F 00-LATER, V6 & V8 ZIP KIT
Toyota/Lexus 40E, 40F 00-LTER, V6 & V8 ZIP KIT PRT NUMER 40-LTE-ZIP QUIK GUIDE NOTE: Type 4 EP-style valve body is shown. Parts will fit in the same locations in a throttle cable-style and Type EP-style
More informationStorage. All prices exclude VAT
Storage Universal storage offers a wide range of storage solutions to match all the desking ranges. hoose from a wide range of economy and deluxe pedestals, bookcases, cupboards, combination cupboards
More informationP/N# Performance Lowering Springs Installation Instructions
P/N# 19391 Performance Lowering Springs Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your Lowering Spring set was designed with the performance and durability
More informationHighly Styled, Low Cost Serpentine Drive Chevy Small Block Alternator & Power Steering Kit #21085 and 21090
Revised 4-2-08 Highly Styled, Low Cost Serpentine Drive Installation Instructions Chevy Small Block Alternator & Power Steering Kit #21085 and 21090 Included Parts List Hardware Qty P/N... Description
More informationModel AS-RC3260 TV Cart. Rolling Cart for Audio Mount System & Flat Panel TVs
Model AS-RC3260 TV Cart Rolling Cart for Audio Mount System & Flat Panel TVs GETTING STARTED Introduction Congratulations on the purchase of your new Helios AS-RC3260 Rolling Cart. For maximum benefit,
More informationATD-7391A 10-Ton Long Chassis Service Jack Owner s Manual
ATD-7391A 10-Ton Long Chassis Service Jack Owner s Manual Specifications Features: Made in China to ATD Tools, Inc. Specifications Visit us at www.atdtools.com ATD7391A_rev_0318 NOTE: 1. SAFETY maintenance.
More informationRear Upper Camber Link (12425) Scion tc
Rear Upper Camber Link (12425) Scion tc Thank you for your purchase from our new line of Scion tc parts. Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation
More information4412HS Wway 4X4X12 N1 HC Lay-In. Features. Material, Color, and Finish. Dimensions and Weight. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 ax: 936-560-4685 4412S Wway 4X4X12 N1 Lay-In ooper -Line/able Tray atalog Number Manufacturer Description Weight per unit Product ategory
More information16366 Steering Tie Rods Chrysler B-Body, Charger, Super Bee, Road Runner, GTX Chrysler E-Body, Cuda, Challenger
P 16366 66-70 B-Body, 70-74 E-Body 16366 Steering Tie Rods 1966-1970 Chrysler B-Body, Charger, Super Bee, Road Runner, GTX 1970-1974 Chrysler E-Body, Cuda, Challenger Thank you for your purchase from our
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationSize of Mattress and Foundation. The length and width of the upper and lower bunk mattress and foundation are as follows : Width 37 ½ - 38 ½ 52-53
Size of Mattress and oundation The length and width of the upper and lower bunk mattress and foundation are as follows : Size Twin ull Length 74-75 74-75 Width 37 ½ - 38 ½ 52-53 Thickness 9 ½ max 9 ½ max
More information