Modernized Systems for 24 Solar Tower Tunnel Telescope at Kodaikanal. N. SIVA RAJ Indian Institute of Astrophysics, Bangalore
|
|
- Everett McLaughlin
- 5 years ago
- Views:
Transcription
1 Modernized Systems for 24 Solar Tower Tunnel Telescope at Kodaikanal N. SIVA RAJ Indian Institute of Astrophysics, Bangalore
2 24 Solar Tower Tunnel Telescope Kodaikanal ******* INAUGURATED by Dr. P. Subbarayan, ( Minister for Transport & Communications ) Govt. Of India on 14 th September ************************ GRUBB PARSONS Telescope - Coelostat - Control Systems Designed by Sir Howard Grubb Parsons & Co. Ltd, Walker Gate, England in May 1958 **************************** SCIENTIFIC ACHEIVEMENTS 46 Years Valuable Observational Data ***********************
3 Modernized Systems for 24 Solar Tower Tunnel Telescope at Kodaikanal H I G H L I G H T S * GRUBB PARSONS Control System * R.A and Dec. Fine Speed System * * Modernized Control System of the Telescope * * Coelostat Diurnal Drive & Tracking System * Modernized AC Synchronous Servo Motor Simovert Master Drive * * 15 Objective Lens Focus Control Drive * * Upgradation of Grating Mount & Drive Automation * * Electrical Rewiring of Telescope building * *****************
4 GRUBB PARSONS Control System Vaccum Tube Version of Electronics used in the System. Diurnal Drive consisted of thermostatically controlled oven and heater in the oscillator control circuit. R.A & Dec CW and CCW Coarse and Fine speeds, 15 Objective Lens, controlled through the system. The above System was completely discarded by replacing with our Modernized Control Systems on 12 th October 2006 Earlier Control System - Grubb Parsons, England
5 R.A and Dec Fine Speed System * Setting Speed of 1deg of arc/min of time * Guide Speed of 1 min. of arc/min of time, Became essential that still finer speed will be better for Sunspots Scanning. Coarse Speed AC Motors, Fine Guide Speed HS 50 RA & Dec (cw &ccw) EMC Coupling with Interlocking Circuit preventer & Audio/Visual Limits Indication. Integrated Mechanical Modular mount attachment developed by Mr. J.P.A.Samson. Observational Results: Fine speed movements in R.A & Dec the Image positioning accuracy has improved to less than 0.5 arc.sec. for Sunspot scanning with spacial finer steps. ( A.V. Ananth, Prof. Jagdev Singh, N. Sivaraj, K.C. Thulasidharen ) AC -Coarse & Stepper -Fine Motors Coupled with EMC
6 A.V. Ananth N. Sivaraj K.C.Thulasidharen A.V. Ananth N. Published Sivaraj in Academic K.C.Thulasidharen Report: Published in Academic Report:
7 Modernized Control System of the Telescope Bin No: 1 R.A/Dec Coarse Control Drive, Limits, Interlock and Software Interface Bin No: 2 SS-2000 Superior Electric Slo-Syn Drive System Bin No: 3 Relay panel, EMC supply, +5v/+15v dc supply Bin No: 4 Variable Speed Stepper motor Grating Drive System Bin No: 5-15 Objective Lens Focus Control Drive Bin No: 6 Power Supply Dual 110v for SS-2000 drives and Dual 24v dc for the Electro-magnetic Clutch Modernized Control System for 24 Inch Solar Tower Tunnel Telescope
8 COELOSTAT DIURNAL DRIVE SYSTEM & TRACKING The Vaccum tube version of Diurnal drive was replaced with an advanced Solid State Drive System with higher accuracy in Finest Variable TWS tracking speed of the Solar image installed on 20 th December ( Prof. R. Srinivasan, K.S.Ramamoorthy ) Since then the Drive system is working exceptionally good except for the major problems developed with the AC Synchronous Motor due to ageing, a status where it can fail at any moment. The exact replacement of the motor is not available. Coelostat Diurnal Drive System Diurnal Drive Motor A.C Synch. Motor: H.P: 1/20, R.P.M: 1420, 200v, 3 Phase, Freq: 47 C/S, Make: Croydon, England
9 Modernized AC Synchronous Servo Motor & Simovert Master Drive Proposed SIEMENS System: A.C Synchronous Servo Motor with Incremental Encoder, Torque: 2.6 NM, R.P.M: 0 to 3000 rpm, Model: 1FK7042 5AF71-1AA0. SIEMENS SIMOVERT Master Drive/Converter: Power: 1.1KW, Input: V AC, Model: 6SE7013 OEP50, Output Frequency / Max. digital resolution: 0 400Hz / Hz = 0.1 rpm. The System has been procured and expected to be installed at KKL by the end of April Features planned: PC Control of Speed with GUI. PC Calculates the diurnal speed & sets the Synchronous Motor frequency accurately. Integrated GUI environment for R.A, Dec drives, focus control & Grating control. [ March 2008 ] ( Prof. R. Srinivasan, N. Sivaraj ) Modernized Version of Objective Lens Focus Control Drive Designed and fabricated Control drive for AC induction motor single phase running at constant speed of 1400 rpm incorporating AC magnetic solenoid brakes for instant stopping as soon as the forwarding and reversing of the lens is stopped. Keeps the Solar image precisely focused onto the focal plane, since the overshoot of the carriage moved in steps of 0.5mm is arrested by the shoes of an AC magnetic brake bearing, on the drum when the motor circuit is broken. The reduction gear box has a spring loaded slipping clutch torque of 0.6 lb.ins. on the end of the worm wheel, as a part of the carriage travel limiting device.
10 Upgradation of Grating Mount & Drive Automation ( Work in Progress ) Scope of Work * Fabrication of new mount for the Grating. * Replacement of existing gear system with more precision gear with zero backlash. * Mounting of Absolute Encoder on axis of rotation for position readout. * Modified Grating mount will have new Warm and wheel system. * Micro Stepping Slo-Syn drive - MD 808, Stepper Motor - KML 063 and 17 bit Absolute Encoder HEIDENHAIN ROC412 for accurate positioning. Planning, Preperations, Drawings and Preliminary works are in progress. Mr. P.U. Kamath from Mechanical Engineering Division is working on the new mount design & fabrication and myself working on the drive automation. The work is expected to be completed by end of December ( P. U. Kamath, N. Sivaraj )
11 Proposed Electrical Rewiring of Telescope Building * Ageing of Electrical wirings & frequent problems * Weak & broken Insulations * Rusted GI pipes & bad Earthings * Damaged light fittings. Requirements / Estimation and Proposal Submitted for approval. The above work is proposed to be carried out during September and October 2007.
12 With the Completion of Grating Drive Automation & Electrical Rewiring and Renovation of the building before the end of December 2007, I hope the 24 Solar Tower Tunnel Telescope becomes fully Modernized Telescope with Upgraded Scientific Observational Facilities. Thank You ************
PFIS Filter Mechanism SPECIFICATION SALT-3130AE VERSION February 2003
PFIS Filter Mechanism SPECIFICATION SALT-3130AE-00012 VERSION 1.0 16 February 2003 1. Scope 1.1 Identification This document covers the design of the Filter Mechanism for PFIS. In it are detailed the specifications,
More informationPFIS Waveplate Mechanism SPECIFICATION SALT-3130AE VERSION 1.1 February 2002
PFIS Waveplate Mechanism SPECIFICATION SALT-3130AE-0006 VERSION 1.1 February 2002 1. Scope 1.1 Identification This document covers the design of the Wave Plate Mechanism for PFIS. In it are detailed the
More informationGuaranteed Technical Particulars(GTP) Deviation/Remarks Specify if any. Computerized Motor testing system suitable to test LV 3 phase motors
Section II - Technical Specification Tender Enquiry No: BUY/EATD(BEE)-01/12-13 Name of the Equipment: MOTOR TESTING SYSTEM Note: The Offers should be submitted only in this format otherwise the offer will
More informationSIMOTICS S-1FT7 Servomotors. The Compact Servomotors for High-Performance Motion Control Applications. Motors. Edition April 2017.
Motors SIMOTICS S-1FT7 Servomotors The Compact Servomotors for High-Performance Motion Control Applications Brochure Edition April 2017 siemens.com/servomotors The Servomotors for High-Performance Applications
More informationUni-directional Continuous Operation. Induction Motors. Page C-21. Three-phase high efficiency induction motors Page C-23
Selection Guide By Operating Function By Basic Characteristics Constant Speed Operation Uni-directional Continuous Operation Page C-21 Three-phase high efficiency induction motors Page C-23 Easy Assembly
More informationLINEAR MOTOR SERIES 5-Axis Double column machine center
Focus High Speed & 5-axis LINEAR MOTOR SERIES 5-Axis Double column machine center KEN ICHI MACHINE CO., LTD LINEAR MOTOR SERIES 5-Axis Double column machine center Suitable for Automotive plastic mold
More informationR-SERIES MULTI-AXIS INDUSTRIAL ROBOTS
Automation Solutions R-SERIES MULTI-AXIS INDUSTRIAL ROBOTS COMPACT MULTI-AXIS INDUSTRIAL ROBOTS FOR COMPLEX PROCESSING TASKS Reduce Manufacturing Costs Improve Production Time Increase Throughput Engineering
More informationContinuing Research and Development of Linac and Final Doublet Girder Movers
Continuing Research and Development of Linac and Final Doublet Girder Movers Classification: Accelerator Science Institution and Personnel requesting funding: Colorado State University David W. Warner,
More informationEVT A Memo 34. ig^la MONITOR AND CONTROL SYSTEM Monitor and Control Points. George Peck
EVT A Memo 34 ig^la MONITOR AND CONTROL SYSTEM Monitor and Control Points George Peck PROGRESS REPORT - March 12, 2002 This report summarizes the information gathered so far about monitor and control points
More informationGEMINI 8-M Telescopes Project
GEMINI 8-M Telescopes Project Friction Driven Encoder Test Program Report G. Pentland Telescope Structure, Building, and Enclosure Group March 23, 1995 GEMINI PROJECT OFFICE 950 N. Cherry Ave. Tucson,
More informationCANTILEVER TABLE. Specification. Features: Dual lead worm gear drive Hydraulic clamping Option with direct measuring encoder
CANTILEVER TABLE Features: Dual lead worm gear drive Hydraulic clamping Option with direct measuring encoder Specification Model Dimensional data Turn Table size (mm) Reference slot width (mm) T - Slots
More informationCopyright AREVA Wind/Jan Oelker. in wind turbines
Copyright AREVA Wind/Jan Oelker Sensors and control systems in wind turbines 3 1 7 6 8 4 2 5 9 Sensors and control systems 15 years of experience and more than 30,000 installations worldwide Modern wind
More informationContinuing Research and Development of Linac and Final Doublet Girder Movers
Continuing Research and Development of Linac and Final Doublet Girder Movers Classification: Accelerator Science Institution and Personnel requesting funding: Colorado State University David W. Warner,
More informationLinear Induction Motor (LIMO) Modular Test Bed for Various Applications
Linear Induction Motor (LIMO) Modular Test Bed for Various Applications University of Connecticut Department of Electrical and Computer Engineering Advanced Power Electronics and Electric Drives Lab (APEDL)
More informationMINIATURE SIZE BENCHMARK STRENGTH PRECISION
Piezo LEGS motors MINIATURE SIZE BENCHMARK STRENGTH PRECISION High Performance in a Compact Space Optics, lasers and photonics An ever expanding high-tech sector is characterized by many new instrument
More informationPrecise, flexible, efficient automation solutions for the semiconductor industry
Precise, flexible, efficient automation solutions for the semiconductor industry 3 Wafer Handling High rigidity, no overshoot, no backlash: Rexroth wafer handling solutions are designed for perfect balance
More informationProduct Information. ROC 2000 ROC 7000 Angle Encoders with Integral Bearing for Separate Shaft Coupling
Product Information ROC 2000 ROC 7000 Angle Encoders with Integral Bearing for Separate Shaft Coupling November 2015 ROC 2000 series For separate shaft coupling System accuracy ±5 A = Bearing À = Position
More informationmechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162
Overview RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 DSH-S Rotary Swivelling Unit C 164 RF 1 Indexing Table C 166 D 1 Rotary
More informationDesigning Drive Systems for Low Web Speeds
Designing Drive Systems for Low Web Speeds Web Tension Control at Low Speeds Very low web speeds can provide challenges to implementing drive systems with accurate tension control. UNWIND LOAD CELL COOLING
More informationI.T TMY-B* series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION ISSUED
TMY-B series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION I.T. 6471 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 03-09 / series 11 MAIN
More informationElectro Pneumatic Workbench Scientech 2470
Scientech 2470 Electro Pneumatic Workbench is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial
More informationEncoder Installation Manual Dynapar brand SERIES M21 Modular Encoder
Headquarters: 1675 Delany Road Gurnee, IL 60031-1282 USA Visit us at www.dynapar.com Encoder Installation Manual Dynapar brand SERIES M21 Modular Encoder Document No.: 702209-0001 Revision Level: J October
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
More informationSP5 INSTALLATION AND SETUP MANUAL
SP5 INSTALLATION AND SETUP MANUAL 1 Installation 1.1 Introduction The SP5 System consists of a Data Acquisition unit (DAQ) with two complete Roller control channels, each Roller Control Channel consists
More informationNGAO OSM. Design Study. Alex Delacroix 08/05/2009 Version 9
NGAO OSM Design Study Alex Delacroix 08/05/2009 Version 9 1 1. Conceptual design and operation The Ø 5 (3.635 mm) probe covers the entire Ø 120 (87.24 mm) Field of View. The 2 degrees of freedom probe
More informationFabrication and Automation of Solvent less Packaging Machine
Fabrication and Automation of Solvent less Packaging Machine Masood Nazir*, Prof Rashmi Ranjan Das# * M.tech Student at School of Electrical Engineering, VIT University Vellore, Tamilnadu-632014 India
More informationDesign and Analysis of Active Electro Hydraulic Thruster Brake for Lifting Machine
ISSN 2395-1621 Design and Analysis of Active Electro Hydraulic Thruster Brake for Lifting Machine #1 V.S. Kshirsagar, #2 V.H.Waghmare 1 vishalkshirsagar88@gmail.com 2 veeru.w@gmail.com #12 Mechanical Engineering,
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Low-Profile Modular Crescent Cuber Models KML-61MAH KML-61MWH KML-61MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 7126 Issued: -1-2007 Revised: 9--201
More informationPrecision in Accuracy
Your addition in transmission. Precision in Accuracy MELIOR MOTION PRECISION GEARBOX PSH-D SPECIAL PRECISION GEARBOXES The Premium Group Premium Stephan Hameln, Germany Design, development and production
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KML-250MAH, MWH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71192 Issued: 9-18-2001 Revised: 2-23-2015 CONTENTS Auxiliary
More informationMaalonDrive. Space 8mm - Type 2. Technical Supply Specifications: MaalonDrive Space 8mm - Type 2. Attributes. Technical parameter.
MaalonDrive Space 8mm - Type 2 Attributes Highlights Description High repeatability Dry lubrication due to coatings Zero backlash with optimised fit between speed and resolution Worm gear integrated on
More informationThe optimum geared motor for every motion control application. Brochure April 2007
The optimum geared motor for every motion control application Brochure April 2007 Geared servo motors overview For motion control applications, Siemens offers an extensive range of rotary servomotors.
More informationAsynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection
Selection and ordering data speed Shaft height power torque voltage Speed during field weakening 1) Continuous speed, max. 2) Speed, max. 3) 1PL6 asynchronous motor Forced ventilation n rated SH P rated
More informationMAGTROL. WB/PB 115 Series Eddy-Current and Powder Dynamometers. WB/PB 115 Data Sheet. Features. Description. Applications
MAGTROL WB/PB 5 Data Sheet WB/PB 5 Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum from 50 N m to 200 N m (36 lb ft to 47 lb ft) Braking Power: 5 kw to 30 kw Stable Braking,
More informationFINETECH CONTROLS PVT. LTD. An ISO Company G-81, F/F, Sec-63, Noida, , INDIA. Automation with FINETECH
CAG ADVERTISING : 9810612122, 9871197377 FINETECH CONTROLS PVT. LTD. An ISO 9001-2015 Company G-81, F/F, Sec-63, Noida, 201307, INDIA Automation with FINETECH Mobile: 9811102509, 9811209870 E-mail: info@
More informationC-SERIES S-SERIES EMA LINEAR ACTUATORS. Metric Machine Screw Jacks.
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS 0i 02 Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence:
More informationASTRO-PHYSICS 600E GERMAN EQUATORIAL MOUNT (600HDA) WITH DUAL AXIS STEPPER MOTORS AND 8010 CONTROLLER
ASTRO-PHYSICS 600E GERMAN EQUATORIAL MOUNT (600HDA) WITH DUAL AXIS STEPPER MOTORS AND 8010 CONTROLLER MODEL 600HDA (600E) PARTS LIST 1pc. 600E HDA Equatorial Head with stepper motors on right ascension
More informationAPR Series. Direct-Drive Rotary Stage. Accuracies to 1.5 arc second. Axial load capacity up to 250 kg. Incremental or absolute encoders
APR Series Rotary Stages APR Series Direct-Drive Rotary Stage Accuracies to 1.5 arc second load capacity up to 2 kg Incremental or absolute encoders Large bearings provide high payload and moment load
More informationPERFECT COMBINATION EFFICIENTLY USED. Competent customer consulting Professional selection Integrated tools Powerful products Reliable quality
PRODUCT PORTFOLIO 2018 EN PERFECT COMBINATION EFFICIENTLY USED Competent customer consulting Professional selection Integrated tools Powerful products Reliable quality SYSTEM OVERVIEW Automation with Drive
More informationmechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216
Overview RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 D 2 Indexing Table B 218 MD 1 Midget Rotary Axis B 220 ZR 20 Indexing
More informationCHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION 1.1 MOTIVATION OF THE RESEARCH Electrical Machinery is more than 100 years old. While new types of machines have emerged recently (for example stepper motor, switched reluctance
More informationSP4 DOCUMENTATION. 1. SP4 Reference manual SP4 console.
SP4 DOCUMENTATION 1. SP4 Reference manual.... 1 1.1. SP4 console... 1 1.2 Configuration... 3 1.3 SP4 I/O module.... 6 2. Dynamometer Installation... 7 2.1. Installation parts.... 8 2.2. Connectors and
More informationAyeyarwady Integrated River basin Management Project (AIRBM)
Public Disclosure Authorized Public Disclosure Authorized I. GENERAL Ayeyarwady Integrated River basin Management Project (AIRBM) Procurement Plan 1. Project information a. Country/Borrower: Myanmar b.
More informationDKR Intelligent Digital AC Vector Drives 35 to 330 hp (26 to 245 kw)
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation DKR Intelligent Digital AC Vector Drives 35 to 330 hp (26 to 245 kw) The Drive &
More informationINDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur , Uttar Pradesh, India Centre for Lasers and Photonics
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur 208016, Uttar Pradesh, India Centre for Lasers and Photonics Enquiry no.: CELP/RV/EQP/MHR/2017/1 Enquiry date: 23/04/2018 Closing date: 17/05/2018 Sealed quotations
More informationARMS Series Rotary Motion Simulators
ARMS Series Rotary Motion Simulators Designed for highly accurate motion generation Velocity stability of 0.0001% over 360 Position resolution to 0.02 arc sec Payloads to 230 kg Integrated slip rings and
More informationMAGTROL. WB/PB 43 Series Eddy-Current and Powder Dynamometers. WB/PB 43 Data Sheet. Features. Description. Applications
Data Sheet Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum Torque from.5 N m to 0 N m (. lb ft to 7.3 lb ft) Braking Power: 0.5 kw to 3 kw Stable Braking Torque, without Shock
More informationLevel 7 Post Graduate Diploma in Engineering Mechatronics
9210-223 Level 7 Post Graduate Diploma in Engineering Mechatronics 0 You should have the following for this examination one answer book calculator (programmable calculators are not allowed) pen pencil
More informationElectro Pneumatic WorkStation Scientech 2470
Electro Pneumatic WorkStation is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial Automation
More informationLSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw
4176 en - 0.08 / a Permanent Magnet Solutions LSRPM - UNIDRIVE SP Synchronous motors with permanent magnets-drive 0.75 to 400 kw Selection guide A modular offer LS SOFT Software + cables RS485 or USB/RS22
More informationRotary unit ZD 30. Collet holder. Clamping ring housing SK 20 for tools Ø 3-13 mm, with installation ring. Part no.:
Rotary unit ZD 30 Features Low play toothed belt drive with Stepper motor Reduction 1 : 30 Shaft with Ø 15 mm boring Housing flange with inner cone SK 20 Weight: 2,9 kg For pin assignment see page B-122
More informationRainbowAstro Co., Ltd.
RainbowAstro Co., Ltd. Table of Contents 1. About the Product... 3 1.1 Features... 오류! 책갈피가정의되어있지않습니다.3 1.2 Specifications... 3 2. Configuration and Components... 6 2.1 Configuration... 8 2.2 Names of
More informationLinear & Rotary Actuators F-41
& F-41 & DRS Series Equipped Page Series Equipped F-4 F-41 F-4 Series Equipped $ $ For detailed information about regulations and standards, please see the Oriental Motor website. The Series is a line
More informationGMS 32. Double flank testing machine for gears
GMS 32 Double flank testing machine gears Specifications max. diameter of measured gear 100 mm (4'') max. diameter of master gear 80 mm center distance 0... 90mm max. weight of gear 0.5 kg max. testing
More informationLinear Induction Motor (LIMO) Modular Test Bed for Various Applications
Linear Induction Motor (LIMO) Modular Test Bed for Various Applications ECE 4901 Senior Design I Fall 2013 Fall Project Report Team 190 Members: David Hackney Jonathan Rarey Julio Yela Faculty Advisor
More informationProduct and Company Overview
Product and Company Overview Company History Founded in 1885 2015 marked 130 years of incorporation 12 Factories 2,850 Employees $500 Million in Revenue Quality is First and Foremost Quick Delivery (1-9
More informationPlanar surface gantries EXCH
Key features At a glance General Optimum dynamic response when compared with other Cartesian gantry systems The drive concept ensures low moving dead weight Flat system design Perfectly matched drive and
More informationCompact Linear Stage
Compact Linear Stage With DC or Stepper Motor L-505 Travel ranges 13 or 26 mm Stepper motor or DC servo motor with and without gearhead Velocity to 15 mm/s Load capacity to 30 N Integrated reference point
More informationSolar Powered, Constant/Continuous Move Micro Center Pivot
Solar Powered, Constant/Continuous Move Micro Center Pivot Padmakar Kelkar Bright Stars Electronics, 43/2, Erandawana, Pune 411038 INDIA Email : brightstare@dataone.in Vasant Joshi 1153, Stoneshead Court
More informationThe easy, high-performance and safe servo drive system usa.siemens.com/sinamics-s210
SINAMICS S210 The easy, high-performance and safe servo drive system usa.siemens.com/sinamics-s210 Off to a fast start. Precise and reliable in operation Today, machine builders are facing special challenges
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationElectric cylinders CASM
Electric cylinders CASM 32-4-63 Contents Product description 4 Motors and gearboxes 6 Manuals 1 3D models 1 Linear unit 3 12 Linear unit 4 14 Linear unit 63 16 linear unit 18 Actuator 32 2 Actuator 4 32
More informationAutomation Capabilities
Crane Valves North America Automation Capabilities Summary of Capabilities Automation Crane Valves North America provides a variety of valve automation products, including pneumatic and electric actuators,
More informationThe Latest Sensor Trends
Sensing & Feedback Technologies The Latest Sensor Trends Agenda Miniature sensors open up new applications Alternatives to Fiber optics Pneumatic cylinder sensing: Dual systems, analog and lifetime warranties
More information470 Frame Synchronous AC Permanent Magnet Gearless Motors
470 Frame Synchronous AC Permanent Magnet Gearless Motors AC Gearless Machines Imperial Alternating Current, Permanent Magnet, Gearless Machines are available in three frame sizes to suit a wide range
More informationPCS 100 SYSTEM INSTALLATION INSTRUCTIONS
PCS 00 SYSTEM INSTALLATION INSTRUCTIONS PCS - 00 + - POWER 4VDC CW TIME LO NL 4 5 6 ON C&K SDA06 CCW HI RL WHITE BROWN BLACK NC L NC L ON C&K SDA04 4 NO M NO M RESET START 5V 4V COM (0) BLUE SCU-00 Made
More informationTCS Axis Motor Tachometer. Replacement
UNIVERSITY OF HAWAII INSTITUTE FOR ASTRONOMY 2680 Woodlawn Dr. Honolulu, HI 96822 NASA Infrared Telescope Facility TCS Axis Motor Tachometer.......... Replacement Eric Warmbier July 9, 2008 Version - Table
More informationCompact Linear Stage
Compact Linear Stage For Loads to 10 kg L-406 Travel ranges from 26 mm to 102 mm (1" to 4") Stepper motor or DC servo motor with and without gearhead Direction-sensing reference point switch Integrated
More informationStepper Motors ver ver.5
A Stepper s Stepper s A-1 Overview... A-2 Overview and... A-15 & Stepper and RK Series A-16 RK... A-47... A-51 Stepper Series A-52 Stepper Series A-8 See Full Product Details Online www.orientalmotor.com
More informationIRT 4000 AT-S/M/L. Technical Manual. quality IN MOTION. quality IN MOTION
IRT quality IN MOTION www.irtsa.com 4000 AT-S/M/L Technical Manual IRT quality IN MOTION E2 0 8 4 1 5 September 2013-Rev. 5 UL Requirements Drives Series 2000 / 4000 AT 1. Field wiring terminal to use
More informationMotor Model Significance
SJT SEIES AC SEVO MOTO Motor Model Significance Example:80SJT-MZ032E(A4Y1X) 80 SJT - M Z 032 E(A Y X) M Foundation Number AC synchronous servo motor Feedback element photoelectric encoder no Y Z S No X
More informationAsynchronous and synchronous motors for SINAMICS S120 1PL6 asynchronous motors Forced ventilation, IP23 degree of protection
Overview 1PL6 motors, shaft heights 180 to 22 Benefits 7 Extremely high power density with small motor dimensions (0 to 60 % higher output as compared to 1PH7 in degree of protection IP) 7 Speed down to
More informationAutomation Days Radionica Motion Control
Automation Days 2016 Radionica Motion Control SINAMICS V20 FSAA NEW Up to a power rating of 0.75 kw (line voltage, 1AC, 200 V) now even 24 % smaller and more compact 1 AC 200 V, 0.12 to 0.75 kw with integrated
More informationPowerful Solutions for Welding and Cutting Automation with Precision and Versatility! Bug-O Systems. Automated Cutting and Welding Systems
MODULAR DRIVE SYSTEM Powerful Solutions for Welding and Cutting Automation with Precision and Versatility! A powerful machine that allows the operator to custom configure one machine for various applications.
More informationBeta Motor Catalogue
Beta Motor Catalogue ANCA Motion Specialises In Tailoring Motion Control solutions At ANCA Motion we design and manufacture flexible control systems, specialising in high precision CNC machines. We tailor
More informationGauging and profile control
Gauging and profile control Gauging and profile control SYNCRO measuring systems have been developed in order to meet with the most different requirements in all those processes which require a repeatable
More information1.3 LINAX Lxs (shuttle) NEW
1.3 LINA Lxs (shuttle) NEW Stroke Installation length LINA Lxu (and Lxs) Installation length = Stroke + 130mm This LINA Lxs linear motor axes can be controlled only with the new, more powerful ENA vi 75V8
More informationMotor/Drive Configuration
ZX900 Electrical Specifications Input Power Output Power Electrical specifications for the ZX900 series drive's input and output power are provided in this section. Voltage (Nominal) Voltage (Range) Frequency
More informationDYNAMOMETER CONTROLLER MODEL 5220 INSTRUCTION AND REFERENCE MANUAL
DYNAMOMETER CONTROLLER MODEL 5220 INSTRUCTION AND REFERENCE MANUAL IDENTIFICATION DIAGRAMS MODEL 5220 FRONT PANEL MODEL 5220 REAR PANEL CONTENTS 1.0 Introduction 2.0 Connecting Instructions 3.0 Operational
More informationPIglide RM Rotation Stage with Air Bearings
PIglide RM Rotation Stage with Air Bearings Friction-Free, Ideal for Indexing, Positioning, Scanning, Measuring Technology A-62x Cleanroom compatible Motion platform diameter from 50 mm to 300 mm Load
More informationPDR IR-E3 Evolution Series SMD/BGA Rework Stations
PDR IR-E3 Evolution Series SMD/BGA Rework Stations PDR Focused IR Rework Stations for Ultimate Performance in SMD/BGA/uBGA Rework NOW... Three versions of our best selling product E3S Standard E3G Gold
More informationApplication Note : Comparative Motor Technologies
Application Note : Comparative Motor Technologies Air Motor and Cylinders Air Actuators use compressed air to move a piston for linear motion or turn a turbine for rotary motion. Responsiveness, speed
More informationInvestigation of a promising method for liquid hydrocarbons spraying
Journal of Physics: Conference Series PAPER OPEN ACCESS Investigation of a promising method for liquid hydrocarbons spraying To cite this article: E P Kopyev and E Yu Shadrin 2018 J. Phys.: Conf. Ser.
More informationTYPE-CERTIFICATE DATA SHEET
TYPE-CERTIFICATE DATA SHEET For Models: IO-390-A1A6 IO-390-A3A6 IO-390-A1B6 IO-390-A3B6 AEIO-390-A1A6 AEIO-390-A3A6 AEIO-390-A1B6 AEIO-390-A3B6 IO-390-C1A6 IO-390-C3A6 IO-390-C1B6 IO-390-C3B6 No. IM.E.097
More informationKM SERIES HIGH TOR.
SLO-S O-SYN KM SERIES HIGH TOR ORQUE STEP ORS KM SERIES Superior Electric SLO-SYN long recognized as the leader in step motor technology, has achieved new levels of performance with its high energy KM
More informationThree-dimensional gantries
Key features At a glance A three-dimensional gantry (YXCR) is an assembly of several axis modules (EHM /DHMZ) to produce a movement in 3D space. Can be used universally for handling light to very heavy
More information2007 International Future Energy Challenge Team Members
2007 International Future Energy Challenge Team Members University of Colorado - Boulder Maung Myat Richard Tan Geoff Sanders Gregory Martin Richard Moutoux Ankit Tripathi Marc Hesse Dr. Frank Barnes Dr.
More informationDesign, Development and Testing of 3-phase Permanent Magnet Machines and their Converters
Design, Development and Testing of 3-phase Permanent Magnet Machines and their Converters Funding Agency Sanctioned Amount Project Duration Project Status DeitY, under NaMPET-II initiatives. Rs. 103 Lakhs
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-515MAH KM-515MWH KM-515MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71274 Issued: 1-28-2008 Revised: 2-24-2015 CONTENTS
More informationAdvance Electronic Load Controller for Micro Hydro Power Plant
Journal of Energy and Power Engineering 8 (2014) 1802-1810 D DAVID PUBLISHING Advance Electronic Load Controller for Micro Hydro Power Plant Dipesh Shrestha, Ankit Babu Rajbanshi, Kushal Shrestha and Indraman
More informationADR175/240 Series. Mechanical-Bearing Rotary Stage. Direct-drive brushless servomotor. Cog-free design for outstanding velocity stability
DR175/240 Series Mechanical-Bearing Rotary Stage Direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding error motions Direct coupled, high-accuracy rotary encoder
More informationMonthly Progress Report January 2005
Heliosiesmic & Magnetic Imager Doc# HMI00823 Contract #: PY-2223 Cage Code: 65113 Total Pages: 7 Monthly Progress Report January 2005 Lockheed Martin Space Systems Company Advanced Technology Center Lockheed
More informationHybrid Control System, Alpha Step
B Hybrid Control System, Alpha Step Hybrid Control System B-1 Overview... B-2 Overview Hybrid Control System Battery-Free, Absolute Sensor Equipped AZ Series... B-16 Electric Linear Slides EZS Series AZ
More informationPARKING LOT CONTROLLER WITH LOGIC & MAIN CONTACTOR
PARKING LOT CONTROLLER WITH LOGIC & MAIN CONTACTOR VPC-AA The VPC-AA Parking Lot Controller is an easily installed device designed for mid-sized parking lot installations. The weather proof design is ideal
More informationInnovations in SINAMICS Drives and SIMOTICS Motion Control Motors Presented by Randy Summervill Manufacturing in America March 14-15, 2018
Innovations in SINAMICS Drives and SIMOTICS Motion Control Motors Presented by Randy Summervill Manufacturing in America March 14-15, 2018 Before we start A Penny for Your Thoughts At the end of the session,
More informationMAGTROL. WB/PB 65 Series Eddy-Current and Powder Dynamometers. WB/PB 65 Data Sheet. Features. Description. Applications
MAGTROL Data Sheet Series Eddy-Current and Powder Dynamometers Features 4 Models with Maximum Torque from N m to 50 N m (7.3 lb ft to 36 lb ft) Braking Power:.5 kw to 2 kw Stable Braking Torque, without
More informationElectric Motor Test Systems Comprehensive Test Solutions for all kinds of Electric Motors
Crest Enhanced Quality Assurance Crest Test Systems Pvt. Ltd. Electric Motor Test Systems Comprehensive Test Solutions for all kinds of Electric Motors Electric Motor Test Systems Customisable for application
More informationDATUM ELECTRONICS RS425 NON-CONTACT TORQUE TRANSDUCER PRODUCT OVERVIEW
DATUM ELECTRONICS LIMITED TELEPHONE: +44 (0) 1983 28 28 34 FAX: +44 (0) 1983 28 28 35 EMAIL: support@datum-electronics.co.uk WEB: www.datum-electronics.co.uk DATUM ELECTRONICS RS425 NON-CONTACT TORQUE
More informationustepper - Robot Arm Assembly instructions Microcontroller, stepper driver and encoder in an ultra-compact design! By ON Development IVS
ustepper - Robot Arm Assembly instructions Microcontroller, stepper driver and encoder in an ultra-compact design! By ON Development IVS 2016 ON Development IVS All Rights Reserved Assembly notes The parts
More informationElectromechanical Cylinder EMC
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems
More information