Items Symbols Conditions Maximum ratings Units Collector-Emitter voltage VCES 1700 V Gate-Emitter voltage VGES ±20 V Continuous

Transcription

1 IGBT MODULE (V series) 17V / 55A / 2 in one package Features High speed switching Voltage drive Low Inductance module structure Applications Inverter for Motor Drive AC and DC Servo Drive Amplifier Uninterruptible Power Supply Industrial machines, such as Welding machines Maximum Ratings and Characteristics Absolute Maximum Ratings (at TC=25 C unless otherwise specified) Inverter Inverter Thermistor Items Symbols Conditions Maximum ratings Units Collector-Emitter voltage VCES 17 V Gate-Emitter voltage VGES ±2 V IC Continuous TC=25 C 75 TC=1 C 55 Collector current IC pulse 1ms 11 A -IC 55 -IC pulse 1ms 11 Collector power dissipation PC 1 device 75 W Junction temperature Tj 175 Operating junction temperature (under switching conditions) Tjop 15 C Storage temperature Tstg -4 ~ 125 Isolation voltage between terminal and copper base (*1) Viso between thermistor and others (*2) AC : 1min. VAC Mounting (*) -.5 Screw torque Terminals (*4) N m PC-Board (*5) -.6 Note *1: All terminals should be connected together during the test. Note *2: Two thermistor terminals should be connected together, other terminals should be connected together and shorted to base plate during the test. Note *: Recommendable Value : Nm (M5) Note *4: Recommendable Value : Nm (M6) Note *5: Recommendable Value :.4-.6 Nm (M2.5) Electrical characteristics (at Tj= 25 C unless otherwise specified) Items Symbols Conditions Characteristics min. typ. max. Units Zero gate voltage collector current ICES VGE = V, VCE = 17V - -. ma Gate-Emitter leakage current IGES VCE = V, VGE = ±2V - - na Gate-Emitter threshold voltage VGE (th) VCE = 2V, IC = 55mA V Collector-Emitter saturation voltage Tj=25 C VCE (sat) Tj=125 C (terminal) VGE = 15V Tj=15 C IC = 55A Tj=25 C VCE (sat) Tj=125 C (chip) Tj=15 C V Internal gate resistance Rg(int) Ω Input capacitance Cies VCE = 1V, VGE = V, f = 1MHz nf ton VCC = 9V - - Turn-on time tr IC = 55A tr (i) VGE = ±15V nsec Turn-off time toff RG =.Ω tf LS = 8nH Forward on voltage Tj=25 C VF Tj=125 C (terminal) VGE = V Tj=15 C IF = 55A Tj=25 C VF Tj=125 C (chip) Tj=15 C V Reverse recovery time trr IF = 55A nsec Resistance R T = 25 C T = 1 C Ω B value B T = 25/5 C K a MARCH 214

2 Thermal resistance characteristics Items Symbols Conditions Characteristics min. typ. max. Thermal resistance(1device) Rth(j-c) Inverter IGBT Inverter FWD Contact thermal resistance (1device) (*6) Rth(c-f) with Thermal Compound Note *6: This is the value which is defined mounting on the additional cooling fin with thermal compound. Units C/W 2

3 Characteristics (Representative) Collector current vs. Collector-Emitter voltage (typ.) Tj= 25 C / chip Collector current vs. Collector-Emitter voltage (typ.) Tj= 15 C / chip VGE=2V 15V 12V VGE= 2V 15V 1V 8V 12V 1V 8V Collector Current: IC [A] Collector current vs. Collector-Emitter voltage (typ.) VGE= 15V / chip Tj=25 C 125 C 15 C Collector-Emitter Voltage: VCE [V] Collector-Emitter voltage vs. Gate-Emitter voltage (typ.) Tj= 25 C / chip IC=11A IC=55A IC=275A Gate Capacitance: Cies, Coes, Cres [nf] 1 1 Collector-Emitter Voltage: VCE [V] Gate Capacitance vs. Collector-Emitter Voltage (typ.) VGE= V, ƒ= 1MHz, Tj= 25 C Coes Cies Cres Gate-Emitter voltage: VGE [V] VCE VGE Gate-Emitter Voltage: VGE [V] Dynamic Gate Charge (typ.) Vcc=9V, Ic=55A, Tj= 25 C Gate charge: Qg [nc]

4 Switching time: ton, tr, toff, tf [nsec] 1 1 Switching time vs. Collector current (typ.) VCC=9V, VGE=±15V, RG=.Ω, Tj=25 C tf toff ton tr Switching time: ton, tr, toff, tf [nsec] Switching time vs. Collector current (typ.) VCC=9V, VGE=±15V, RG=.Ω, Tj=125 C, 15 C 1 1 ton tf toff Tj=15 o C tr Switching time vs. Gate resistance (typ.) VCC=9V, IC=55A, VGE=±15V, Tj=125 C, 15 C Switching loss vs. Collector current (typ.) VCC=9V, VGE=±15V, RG=.Ω, Tj=125 C, 15 C Switching time: ton, tr, toff, tf [nsec] toff tr ton tf Tj=15 o C Switching loss: Eon, Eoff, Err [mj/pulse] 5 1 Tj=15 o C Eon Eoff Err Gate resistance: RG [Ω] Switching loss vs. Gate resistance (typ.) VCC=9V, IC=55A, VGE=±15V, Tj=125, 15 C Reverse bias safe operating area (max.) +VGE=15V, -VGE=15V, RG=.Ω, Tj=15 C Switching loss: Eon, Eoff, Err [mj/pulse] Tj=15 o C Eon Eoff Err Notice) Switching characteristics of VCE is defined between Sense CX1 and Sense EX1 for Upper arm and Sense EX1 and Sense EX2 for Lower arm Gate resistance: RG [Ω] 4

5 Forward Current vs. Forward Voltage (typ.) chip Reverse Recovery Characteristics (typ.) VCC=9V, VGE=±15V, RG=.Ω, Tj=25 C Tj=25 C 15 C Forward current: IF [A] 125 C Reverse recovery current: Irr [A] Reverse recovery time: trr [nsec] 1 Irr trr Forward on voltage: Vf [V] Forward on voltage: VF [V] 1 Forward current: IF [A] Reverse Recovery Characteristics (typ.) VCC=9V, VGE=±15V, RG=.Ω, Tj=125 C, 15 C Irr 1 Transient Thermal Resistance (max.) Reverse recovery current: Irr [A] Reverse recovery time: trr [nsec] 1 1 Tj=15 o C trr Thermal resistanse: Rth(j-c) [ C/W]*** FWD IGBT _ [sec] Rth IGBT [ C/W] FWD Forward current: IF [A] Pulse Width : Pw [sec] [THERMISTOR] Temperature characteristic (typ.) FWD safe operating area (max.) Tj=15 C 1 Resistance : R [kω] 1 1 Reverse recovery current: Irr [A] Pmax=687kW Notice)Switching characteristics of Vce is defined between Sense CX1 and Sense EX1 for Upper arm and Sense EX1and Sense EX2 for Lower arm Temperature [ C]

6 Outline Drawings(Unit:mm) Weight: 6g (typ.) Equivalent Circuit [ Inverter ] [ Thermistor ] + CX1 T1 T2 G1.1 G1.2 G1. EX1.1 EX1.2 EX1. GND Cu-Base G2.1 G2.2 G2. EX2.1 EX2.2 EX2. - 6

7 WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 214. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sur to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Co., Ltd. is (or shall be deemed) granted. Fuji Electric Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein.. Although Fuji Electric Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design failsafe, flame retardant, and free of malfunction. 4. The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. Computers OA equipment Communications equipment (terminal devices) Measurement equipment Machine tools Audiovisual equipment Electrical home appliances Personal equipment Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. Transportation equipment (mounted on cars and ships) Trunk communications equipment Traffic-signal control equipment Gas leakage detectors with an auto-shut-off feature Emergency equipment for responding to disasters and anti-burglary devices Safety devices Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). Space equipment Aeronautic equipment Nuclear control equipment Submarine repeater equipment 7. Copyright by Fuji Electric Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 7

8 Technical Information Please refer to URLs below for futher information about products, application manuals and technical documents. 关于本规格书中没有记载的产品信息, 应用手册, 技术资料等, 请参考以下链接 本データシートに記載されていない製品情報, アプリケーションマニュアル, 技術資料は以下の URL をご参照下さい FUJI ELECTRIC Power Semiconductor WEB site 日本 Global 中国 Europe North America Information 日本 1 半導体総合カタログ 2 製品情報 アプリケーションマニュアル 4 技術資料 5 マウンティングインストラクション 6 IGBT 損失シミュレーションソフト 7 AT-NPC -Level 損失シュミレーションソフト 8 富士電機技報 9 製品のお問い合わせ 1 改廃のお知らせ Global 1 Semiconductors General Catalog 2 Product Information Application Manuals 4 Technical Documents 5 Mounting Instructions 6 IGBT Loss Simulation Software 7 AT-NPC -Level Loss Simulation Software 8 Fuji Electric Journal 9 Contact 1 Revised and discontinued product information 中国 1 半导体综合目录 2 产品信息 应用手册 4 技术资料 5 安装说明书 6 IGBT 损耗模拟软件 7 AT-NPC -Level 损耗模拟软件 8 富士电机技报 9 产品咨询 1 产品更改和停产信息