Piezocomposite stack type actuators series PStVS with preload
|
|
|
- Willa Todd
- 5 years ago
- Views:
Transcription
1 Series PStVS with casing and preload, diameter 18 mm, 1000 V Characteristics: max. load: 5000 N max. force generation: 4000 N (@ max. voltage) preload: 700 N (= max. tensile force) Applications: shock wave generation stabilization test and acceleration sensors active vibration damping fuel injection active engine mounting as well as all kinds of positioning tasks which require high loads and/or extreme accelerations Options: Image: Stack type actuators series PStVS with different length piezo material HP (high power, high capacitance) low temperature modification UHV modification thermo stable cooling fins on request SG measurement system axial cable exit increased preload planar/convex output Standard configuration unit cable length m 1.5 connector D-Sub 5W1 ceramic HS/HT HP* temperature range C/ F to 200/to 390 to 90/to 190 * Optional on request PSt_1000_VS_18_ds_Rev00_2016_01_11.docx
2 Series PStVS 1000 V, diameter 18 mm type max. stroke* [µm] length [mm] capacitance [nf] stiffness [N/µm] resonant frequency [khz] PSt 1000/10/7 VS18 12/ PSt 1000/10/20 VS18 27/ PSt 1000/10/25 VS18 35/ PSt 1000/10/40 VS18 55/ PSt 1000/10/60 VS18 80/ PSt 1000/10/80 VS18 105/ PSt 1000/10/100 VS18 130/ PSt 1000/10/125 VS18 160/ PSt 1000/10/150 VS18 200/ PSt 1000/10/200 VS18 260/ * Motion at voltage -200 V to 1000 V/0 V to 1000 V Drawing: Rights reserved to change specifications as progress occurs without notice! PSt_1000_VS_18_ds_Rev00_2016_01_11.docx
3 Piezocomposite stack type actuator series PStVS with preload Series PStVS with casing and preload, diameter 25 mm, 1000 V Characteristics: max. load: N max. force generation: N (@ max. voltage) preload: 1500 N (= max. tensile force) Applications: shock wave generation stabilization sensor testing test and acceleration sensors active vibration damping fuel injection active engine mounting as well as all kinds of positioning tasks which require high loads and/or extreme accelerations Image: Stack type actuators series PStVS with different length Options: piezo material: HP (high power, high capacitance) low temperature modification UHV modification thermo stable cooling fins on request SG measurement system axial cable exit increased preload planar/convex output Standard configuration unit cable length m 1.5 connector D-Sub 5W1 ceramic HS/HT HP* temperature range C/ F to 200/to 390 to 90/to 190 * Optional on request PSt_1000_VS_25_ds_Rev00_2016_01_11.docx
4 Piezocomposite stack type actuator series PStVS with preload Series PStVS 1000 V, diameter 25 mm type max. stroke* [µm] length [mm] capacitance [nf] stiffness [N/µm] resonant frequency [khz] PSt 1000/16/7 VS25 12/ PSt 1000/16/20 VS25 27/ PSt 1000/16/40 VS25 55/ PSt 1000/16/60 VS25 80/ PSt 1000/16/80 VS25 105/ PSt 1000/16/100 VS25 130/ PSt 1000/16/125 VS25 160/ PSt 1000/16/150 VS25 200/ PSt 1000/16/200 VS25 260/ PSt 1000/16/>200 VS25 >200 on request * Motion at voltage -200 V to 1000 V/0 V to 1000 V Drawing: Rights reserved to change specifications as progress occurs without notice! PSt_1000_VS_25_ds_Rev00_2016_01_11.docx
5 Series PStVS with casing and preload, diameter 35 mm, 1000 V Characteristics: max. load :35000 N max. force generation N (@ max. voltage) preload: 4000 N (= max. tensile force) Applications: shock wave generation stabilizing sensor testing test and acceleration sensors active vibration damping fuel injection active engine mounting as well as all positioning tasks which require high loads and/or extreme accelerations Image: Stack type actuators, series PStVS with different length Options: piezo material: HP (high power, high capacitance) low temperature modification UHV modification thermo stable cooling fins on request SG measurement system axial cable exit increased preload planar/convex output Standard configuration unit cable length m 1.5 connector D-Sub 5W1 ceramic HS/HT HP* temperature range C/ F to 200/to 390 to 90/to 190 * Optional on request PSt_1000_VS_35_ds_Rev00_2016_01_11.docx
6 Series PStVS 1000 V, diameter 35 mm type max. stroke* [µm] length [mm] capacitance [nf] stiffness [N/µm] resonant frequency [khz] PSt 1000/25/7 VS 35 12/ PSt 1000/25/20 VS 35 27/ PSt 1000/25/40 VS 35 55/ PSt 1000/25/60 VS 35 80/ PSt 1000/25/80 VS / PSt 1000/25/100 VS / PSt 1000/25/125 VS / PSt 1000/25/150 VS / PSt 1000/25/200 VS / PSt 1000/25/>200 VS 35 >200 on request * Motion at voltage -200 V to 1000 V/0 V to 1000 V Drawing: Rights reserved to change specifications as progress occurs without notice! PSt_1000_VS_35_ds_Rev00_2016_01_11.docx
7 Series PStVS with casing and preload, diameter 45 mm, 1000 V Characteristics: max. load: N max. force generation: N (@ max. voltage) preload: 6000 N (= max. tensile force) Applications: shock wave generation stabilization sensor testing test and acceleration sensors active vibration damping fuel injection active engine mounting as well as all positioning tasks which require high loads and/or extreme accelerations Image: Stack type actuators series PStVS with different dimensions Options: piezo material: HP (high power, high capacitance) low temperature modification UHV modification thermo stable cooling fins on request SG measurement system axial cable exit increased preload planar/convex output Standard configuration unit cable length m 1.5 connector D-Sub 5W1 ceramic HS/HT HP* temperature range C/ F to 200/to 390 to 90/to 190 * Optional on request PSt_1000_VS_45_ds_Rev01_2016_01_11.docx
8 Series PStVS 1000 V, diameter 45 mm type max. stroke* [µm] length [mm] capacitance [nf] stiffness [N/µm] resonant frequency [khz] PSt 1000/35/7 VS45 12/ PSt 1000/35/20 VS45 27/ PSt 1000/35/40 VS45 55/ PSt 1000/35/60 VS45 80/ PSt 1000/35/80 VS45 105/ PSt 1000/35/100 VS45 130/ PSt 1000/35/125 VS45 160/ PSt 1000/35/150 VS45 200/ PSt 1000/35/200 VS45 260/ PSt 1000/35/>200 VS45 >200 on request * Motion at voltage -200 V to 1000/0 V to 1000 V Drawing: Rights reserved to change specifications as progress occurs without notice! PSt_1000_VS_45_ds_Rev01_2016_01_11.docx
1. Stack type piezo actuators
. Stack type piezo actuators. ow voltage actuators with preloaded casings VS PSt 50/4 / VS9 Prestress force = max. tensile force = approx. 40 N Max. load force: 00 N Max. force generation: 00 N Open loop
Integrating piezo. components in. system solutions. The number and variety of piezo applications is growing in all industries, such as semicon,
Integrating piezo components in system solutions The number and variety of piezo applications is growing in all industries, such as semicon, medical, aerospace, consumer and industrial. HEINMADE, based
PL112 PL140 PICMA Bender Actuators
Piezotechnology PL112 PL140 PICMA Bender Actuators Multilayer Piezo Bender Actuators with High Travel and Low Operating Voltage Physik Instrumente (PI) GmbH & Co. KG 2008. Subject to change without notice.
Low voltage co-fired multilayer stacks, rings and chips for actuation
TM International, Ltd. Low voltage co-fired multilayer stacks, rings and chips for actuation (without casing) Low voltage actuators with casings, high voltage actuators Check main catalogue +1 570 726
Applications. Overview. Benefits. Multilayer Piezoelectric Actuators AE Series Resin Coated
Multilayer Piezoelectric Actuators AE Series Resin Coated Overview Multilayer piezoelectric actuators are ceramic elements used to convert electrical energy into mechanical energy such as displacement
Piezo-Mechanics: An Introduction
TM International, Ltd. Piezo-Mechanics: An Introduction sales@americanpiezo.com www.americanpiezo.com 1 570 726 6961 Table of contents 1. Generation of motion by piezo-electrical devices 1.1. Piezomechanical
MaalonDrive. Space 8mm - Type 2. Technical Supply Specifications: MaalonDrive Space 8mm - Type 2. Attributes. Technical parameter.
MaalonDrive Space 8mm - Type 2 Attributes Highlights Description High repeatability Dry lubrication due to coatings Zero backlash with optimised fit between speed and resolution Worm gear integrated on
Nanomotion Technical Design Guide
Nanomotion Technical Design Guide 1 Table of Contents Quick Reference Guide 3 Introduction 4 Core Mechanical Design: Managing Normal Force 4 Linear & Rotary Designs 4-10 Mounting Tolerances 11 Motor Sizing
AMPLIFIED PIEZO ACTUATOR APA WITH VISCOELASTIC MATERIAL FOR MACHINE TOOL SEMI-ACTIVE DAMPING SYSTEM 1. INTRODUCTION
Journal of Machine Engineering, Vol. 14, No. 3, 2014 Aleksander KRAS 1 Frederic BOURGAIN 1 Frank CLAEYSSEN 1 actuator, piezoelectric viscoelastic material machine tool AMPLIFIED PIEZO ACTUATOR APA WITH
Linear Resonance Compressor for Stirling-Type Cryocoolers Activated by Piezoelectric Stack-Type Elements
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Linear Resonance Compressor for Stirling-Type Cryocoolers Activated by Piezoelectric Stack-Type Elements Related content - A computational
Miniature Aerial Vehicle. Lecture 4: MEMS. Design Build & Fly MIT Lecture 4 MEMS. IIT Bombay
Lecture 4 MEMS MEMS Micro Electrical Mechanical Systems Practice of making and combining miniaturized mechanical and electrical components Micromachines in Japan Microsystems Technology in Europe MEMS
PUSH PULL DEVICES. Section 03. Introduction to Push Pull Devices 044. Magnetically-coupled devices. MPPRL - Rotary and Linear Motion 046
Section PUSH PULL DEVICES Introduction to Push Pull Devices 044 Magnetically-coupled devices MPPRL - Rotary and Linear Motion 046 MPPL - Linear Guided Motion 048 MPP - Linear Unguided Motion 050 Edge-welded
NOVEL CARBON-GRAPHITE GAS BEARINGS FOR TURBOMACHINERY
May 2018 NOVEL CARBON-GRAPHITE GAS BEARINGS FOR TURBOMACHINERY Luis San Andrés Mast-Childs Chair Professor Porous Type Gas Bearings Porous type gas bushing pads Porous type gas bearings (PTGB) have sub-micron
Novel Piezoelectric-Based Energy-Harvesting Power Sources for Gun-Fired Munitions
Novel Piezoelectric-Based Energy-Harvesting Power Sources for Gun-Fired Munitions J. Rastegar, R. Murray, C. Pereira* and H-L., Nguyen* Tel. (631) 665-4008 U. S. Army (ARDEC) Picatinny Arsenal New Jersey
PiezoWalk Piezo Stepping Drives
PiezoWalk Piezo Stepping Drives Nanometer Precision with a High Feed Force Forces from 10 to 800 N Integration levels from an OEM motor to a multi-axis positioning system Scalable travel range due to scalable
Piezoelectric Flexure Actuators: Expanding the Capabilities of Piezo Motion Control
Piezoelectric Flexure Actuators: Expanding the Capabilities of Piezo Motion Control Recently-introduced integrated piezoelectric flexure actuators provide an enhanced level of convenience and performance
Multilayer piezoelectric actuators
Multilayer piezoelectric actuators Vol. 8 PRECAUTIONS TO BE TAKEN WHEN USING MULTILAYER PIEZOELECTRIC ACTUATORS Please read these precautions before using our products 1. Before using our products or designing
Other actuators. Kon Mechatronic Sensors and Actuators Tapio Lantela,
Other actuators Kon-41.3140 Mechatronic Sensors and Actuators Tapio Lantela, Overview of lecture Pneumatics Linear motion with electromagnetic devices - Conversion from rotary motion - Solenoid - Voice
Uncommon actuators in Robotic. Lukas Kopecny Brno University of Technology Czech Republic
Uncommon actuators in Robotic Lukas Kopecny Brno University of Technology Czech Republic Why uncomon actuators? Common actuators Rigid Bulky (gearboxes) Problematic interaction Expensive Heavy Uncommon
RC3 Ultrasonic Motor User Manual
RC3 Ultrasonic Motor User Manual D/N: RC03458000-00 REV: F August 29, 2012 Nanomotion Ltd. POB 623, Yokneam 20692, Israel Tel: 972-73-2498000 Fax: 972-73-2498099 Web Site: www.nanomotion.com E-mail: nano@nanomotion.com
Piezoelectric Direct Drive Servovalve
Piezoelectric Direct Drive Servovalve Jason E. Lindler, Eric H. Anderson CSA Engineering 2565 Leghorn Street, Mountain View, California Industrial and Commercial Applications of Smart Structures Technologies
User Manual. HR Motors. Document No. HR Rev D 11/2018
User Manual HR Motors Document No. HR00458000-00 Rev D 11/2018 Nanomotion Ltd. POB 623, Yokneam 20692, Israel Tel: 972-73-2498000 Fax: 972-73-2498099 Web Site: www.nanomotion.com E-mail: nano@nanomotion.com
Precision Motion Control
Precision Motion Control A Johnson Electric Company Based on the principles of ultrasonic standing waves in piezoelectricity, Nanomotion introduces its most advanced series of electronic motors, operating
PIglide RT Rotary Air Bearing Module
PIglide RT Rotary Air Bearing Module Frictionless, Nonmotorized A-60x Motion platform diameter from 50 mm to 300 mm Load capacity to 425 kg Eccentricity / flatness
New Way Porous Gas Bearings as Seals. Bearings Seals
New Way Porous Gas Bearings as Seals Bearings Seals New Way Overview TM Founded January 1994. Aston, Pa. 15 miles south of Philadelphia 54 employees 35,000 sq ft facility, Environmentally Controlled Precision
Encapsulated Piezo Actuators for Use at High Power Levels and / or within Harsh Environmental Conditions.
A 1.9 Encapsulated Piezo Actuators for Use at High Power Levels and / or within Harsh Environmental Conditions. S. Rowe, F. Barillot, A. Pages, F. Claeyssen Cedrat Technologies SA, Meylan, France Abstract:
Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
Eddy current sensors eddyncdt
Eddy current sensors eddyncdt Measuring principle - A magnetic field is generated while energising the coil with alternating current - If there is a magnetically conductive material within the magnetic
Control and sensor techniques for PAD servo motor drive
Downloaded from orbit.dtu.dk on: Oct 12, 218 Control and sensor techniques for PAD servo motor drive Zsurzsan, Tiberiu-Gabriel; Zhang, Zhe; Andersen, Michael A. E.; Andersen, Nils Axel Published in: Proceedings
Modeling and Optimization of a Linear Electromagnetic Piston Pump
Fluid Power Innovation & Research Conference Minneapolis, MN October 10 12, 2016 ing and Optimization of a Linear Electromagnetic Piston Pump Paul Hogan, MS Student Mechanical Engineering, University of
MINIATURE SIZE BENCHMARK STRENGTH PRECISION
Piezo LEGS motors MINIATURE SIZE BENCHMARK STRENGTH PRECISION High Performance in a Compact Space Optics, lasers and photonics An ever expanding high-tech sector is characterized by many new instrument
Experimental Study about the Hysteretic Performance of the Pall-typed Piezoelectric Friction Damper
48 The Open Civil Engineering Journal, 212, 6, 48-54 Open Access Experimental Study about the Hysteretic Performance of the Pall-typed Piezoelectric Friction Damper Jigang Zhang 1,2,*, Wenyan Deng 1 and
Model Building Process
Model Building Process SMT, CHARTWELL HOUSE, 67-69 HOUNDS GATE, NOTTINGHAM, NG1 6BB tel. +44 (0)115 941 9839 fax. +44 (0)115 958 1583 Adding a Shaft Right Click on New Design and select Shaft in Add the
RasuunDrive. HighVac 10mm - Type 3. Technical Supply Specifications: RasuunDrive HighVac 10mm - Type 3. Attributes. Highlights.
RasuunDrive HighVac 10mm - Type 3 Attributes Highlights Description Wide travel range Vacuum suitable lubrication Zero backlash at optimised fit between speed and resolution Integrated limit switches Easy
stage from resolution accuracies is 400 peak) and the from an to outpu positioning (as shown N] continuous continuous needs
![stage from resolution accuracies is 400 peak) and the from an to outpu positioning (as shown N] continuous continuous needs](/thumbs/80/81553844.jpg "stage from resolution accuracies is 400 peak) and the from an to outpu positioning (as shown N] continuous continuous needs")
Earthquake Simulation Using Single or Dual-Axis Linear Motion Stages With the goal of safer buildings and saving lives, scientists and engineers, through the simulation of many recent earthquakes, need
ME 455 Lecture Ideas, Fall 2010
ME 455 Lecture Ideas, Fall 2010 COURSE INTRODUCTION Course goal, design a vehicle (SAE Baja and Formula) Half lecture half project work Group and individual work, integrated Design - optimal solution subject
Extruded Positioning Stage
Extruded Positioning Stage Single-axis stage Turnkey operation Modular aluminum construction with integral brushless linear motor, linear encoder, limit switches, cable carrier, linear bearings and bellows
SOME FACTORS THAT INFLUENCE THE PERFORMANCE OF
SOME FACTORS THAT INFLUENCE THE PERFORMANCE OF Authored By: Robert Pulford Jr. and Engineering Team Members Haydon Kerk Motion Solutions There are various parameters to consider when selecting a Rotary
Active vibration reduction applied to the compressor of an air-conditioning unit for trams
Active vibration reduction applied to the compressor of an air-conditioning unit for trams J. Bös, E. Janssen, M. Kauba and D. Mayer Fraunhofer Institute for Structural Durability and System Reliability
A Test Rig for Evaluation of Thrust Bearings and Face Seals
TRC-B&C-02-2015 TRC Project 32513/1519F2 May 2015 Year II A Test Rig for Evaluation of Thrust Bearings and Face Seals Luis San Andrés, Michael Rohmer, Scott Wilkinson Justification Compressors, turbochargers,
PNEUMATIC HIGH SPEED SPINDLE WITH AIR BEARINGS
PNEUMATIC HIGH SPEED SPINDLE WITH AIR BEARINGS Terenziano RAPARELLI, Federico COLOMBO and Rodrigo VILLAVICENCIO Department of Mechanics, Politecnico di Torino Corso Duca degli Abruzzi 24, Torino, 10129
Design Considerations of Piezo Stepping Actuator
Design Considerations of Piezo Stepping Actuator Ashwin Frank Lobo 1, Md Abdul Raheman 2, Muralidhara 3, Rathnamala Rao 4 PG Student, Department of Electrical and Electronics Engineering, NMAMIT, Nitte,
Modeling of Engine Block and Driveline Vibration as Affected by Combustion
Modeling of Engine Block and Driveline Vibration as Affected by Combustion Gamma Technologies, Inc 2002 GT-SUITE User Conference October 2002 Introduction Engine is suspended in the vehicle frame on several
According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION From small medical pumps to large diesel engines, vibration is unavoidable and dangerous if left unchecked in rotating and oscillating machinery.
APS 400 ELECTRO-SEIS. Long Stroke Shaker Page 1 of 5. Applications. Features
Long Stroke Shaker Page 1 of 5 The APS 400 ELECTRO-SEIS is a force generator specifically designed to be used alone or in arrays for studying dynamic response characteristics of various structures. It
2017 Model Information
2017 Model Information MODEL NAME: KX85 Big Wheel MODEL CODE: KX85DHF THE HOTTEST RACE BIKES FOR FUTURE CHAMPIONS At both the amateur and professional levels, Kawasaki has long been the dominant brand
Measurements Lab (620451):
Measurements Lab (620451): To introduce the practical side of actuators and sensors, also helping to understand how that device can be used. 1. INTRODUCTION FOR MEASURMENT 2. NOISE MEASUREMENT 3. PIEZO-ELECTRIC
Acceleration Sensor AS - 030
Acceleration Sensor AS - 030 1 Application The acceleration sensor AS-030 is used for measurement of vibration acceleration. 12 38 ø21,6 SW 22 M8; 6mm deep AS030-1 (020201) 2 Measuring Principle Acceleration
APS 420 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The APS 420 ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying
Oscillating Mountings
Type HS for hanging screens H B F E HS 7 38 D A HS 45 50 HS 50- Z C G M L M L M L Art. o. Type Load capacity Gmin. G [] A unloaded A* load B unloaded B* load C D E F H L M Weight [kg] 07 311 001 HS 7 500
EFFECT OFSHIMMING ON THE ROTORDYNAMIC FORCE COEFFICIENTS OF A BUMP TYPE FOIL BEARING TRC-B&C
TRC Project 32513/1519F3 EFFECT OFSHIMMING ON THE ROTORDYNAMIC FORCE COEFFICIENTS OF A BUMP TYPE FOIL BEARING TRC-B&C-01-2014 A Shimmed Bump Foil Bearing: Measurements of Drag Torque, Lift Off Speed, and
NEW STRATEGY FOR DESIGN AND FABRICATING OF A GRAIN SORTING SYSTEM USING HIGH-SPEED PIEZOELECTRIC VALVES
NEW STRATEGY FOR DESIGN AND FABRICATING OF A GRAIN SORTING SYSTEM USING HIGH-SPEED PIEZOELECTRIC VALVES So-Nam Yun*, Hwang-Hun Jeong**, Dong-Gun Kim**, Eun-A Jeong** and Hong-Hee Kim*** * Department of
Semi-Active Suspension for an Automobile
Semi-Active Suspension for an Automobile Pavan Kumar.G 1 Mechanical Engineering PESIT Bangalore, India M. Sambasiva Rao 2 Mechanical Engineering PESIT Bangalore, India Abstract Handling characteristics
SGL Series. Single Guide Linear Motor Stage. Zero cogging and backlash ironless linear motor actuator. High speed and high acceleration
SGL Series Single Guide Linear Motor Stage Direct drive Zero cogging and backlash ironless linear motor actuator High speed and high acceleration Fast response and quick settling time Smooth motion at
VT-80 Linear Stage. Related and Compatible Products. Basic Version for Universal Use
VT-80 Linear Stage Basic Version for Universal Use Travel ranges from 25 to 300 mm (1 to 12") Low profile Max. velocity to 20 mm/s Load capacity to 5 kg Standard-class linear stage Recirculating ball bearings
Metal Mesh Foil Gas Bearings for Oil-Free Turbomachinery
12 th National Conference on Gas Lubrication, Dry Gas Seal and Micro Gravity in China May 218 Metal Mesh Foil Gas Bearings for Oil-Free Turbomachinery An introduction to Oil-Free MTM requirements and metal
Planetary. Roller Screw. We invite you to explore and challenges for the future of Kim
Planetary Roller Screw We invite you to explore and challenges for the future of Kim ontents 05 08 18 24 25 Kim o., td. Design Guidelines Product Information Service Range Application onfiguartion Worksheet
Syntron. Electromagnetic Feeders. Heavy-Duty Electromagnetic. Feeders
Syntron Electromagnetic Feeders Syntron F-450 Electromagnetic Feeders feed sand in a glass factory. Heavy-Duty Electromagnetic Feeders With thousands of units installed over the past 60 years, Syntron
Vibration Test Systems
Vibration Test Systems Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages,
Precision Miniature Ball Screw
Brief introduction of Precision Miniature Ball Screw Precision Miniature ball screw assemblies are conventionally understood to be systems with a nominal diameter of 16mm or less. Their miniaturized nut
Sensorless Brushless DC-Servomotors
Sensorless Brushless DC-Servomotors FAULHABER Brushless DC-Servomotors are built for extreme operating conditions. They are precise, have exceptionally long lifetimes and are highly reliable. Outstanding
Design and Analysis of Hydrostatic Bearing Slide Used Linear Motor Direct-drive. Guoan Hou 1, a, Tao Sun 1,b
Advanced Materials Research Vols. 211-212 (2011) pp 666-670 Online available since 2011/Feb/21 at www.scientific.net (2011) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/amr.211-212.666
7. ETCS-i (Electronic Throttle Control System-intelligent)
5 7. ETCS-i (Electronic System-intelligent) General The ETCS-i is used, providing excellent throttle control in all the operating ranges. In the new 1GR-FE engine, the accelerator cable has been discontinued,
Features of the Ball Screw
Features of the Driving Torque One Third of the Sliding Screw With the, balls roll between the screw shaft and the nut to achieve high effi ciency. Its required driving torque is only one third of the
APS 113 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying dynamic
PROGRAM-VERSIONING. Revision number: - Increase of the number at extensive program change - The program is no longer backward compatible
LINEAR MOTION DESIGNER Release Notes PROGRAM-VERSIONING LMD 3.0.1224 Revision number Supporting version number Main version number Name of program Main version number: - Increase of the number at extensive
SKF, the market leader for gas spring seals
Gas spring seals SKF, the market leader for gas spring seals Gas springs are hydropneumatic devices that lift, lower and position equipment of all types. A very important component of these devices is
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks
APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE
Colloquium DYNAMICS OF MACHINES 2012 Prague, February 7 8, 2011 CzechNC APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE Jiří Šimek Abstract: New type of aerodynamic
GRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
Construction of Magnetic Buzzer
Construction of Magnetic Buzzer Construction of Magnetic Buzzer Operation principles and construction These types of electro magnetic transducer(as Fig.1)contain coils which are would in such a manner
Vibration Test Systems. ibratio
ibratio Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages, full pallet
SPRING TESTING MACHINES OVERVIEW. Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning!
SPRING TESTING MACHINES OVERVIEW Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning! Starting with retrofitting and improving testing machines of our competitors
A superior alternative to hydraulic or pneumatic motion providing 15 times the life of a ball screw. Planetary Roller Screws
A superior alternative to hydraulic or pneumatic motion providing 15 times the life of a ball screw Planetary Roller Screws Exlar Your Linear Motion Experts Exlar Corporation is committed to providing
Straight Side Crank Servo. Straight Side Eccentric Gear Servo Press
SDG2 series SDG2-400~200 SDE2 series SDE2-400~200 Straight Side Crank Servo Press Straight Side Eccentric Gear Servo Press Powerful direct drive transmission with flexible and easy-to-use operating system
T-MAX SERIES Direct Drive Rotary Servo
T-MAX SERIES Direct Drive Rotary Servo T-MAX SERIES Direct Drive Rotary Servo Low Profile Direct-drive Rotary Stage Smooth Brushless Servo-drive Positioning Motion Integrated High Resolution Rotary Encoder
Studying the Positioning Accuracy
Ball Screw Studying the Positioning Accuracy Causes of Error in the Positioning Accuracy Point of Selection Studying the Positioning Accuracy The causes of error in the positioning accuracy include the
AMP DTS series. Powerful Bunch
AMP DTS series DTS-500.2 Class AB 2-Channel High Speed Power Amplifier Dynamic Power: 400W RMS Power (4Ω): 50W x 2 RMS Power (2Ω): 80W x 2 Bridged Power (4Ω, RMS): 160W x 1 Signal to Noise Ratio: 110 db
Andrew J Bell. Institute for Materials Research University of Leeds
Andrew J Bell Institute for Materials Research University of Leeds Yannis Goulermas University of Liverpool Neil Sims University of Sheffield Andrew Bell University of Leeds Meiling Zhu Cranfield University
Mini-MAG (MMG) Positioning Products Ultra Compact Linear Motor Stages
Mini-MAG (MMG) Positioning Products Ultra Compact Linear Motor Stages The Mini-MAG (MMG) line of positioning stages blends the ultimate in performance, reliability, and value, delivering nearly twice the
ACTIVE WASHER FOR SMART MECHANICAL LINKAGE
VIII ECCOMAS Thematic Conference on Smart Structures and Materials SMART 2017 A. Güemes, A. Benjeddou, J. Rodellar and Jinsong Leng (Eds) ACTIVE WASHER FOR SMART MECHANICAL LINKAGE CHRISTIAN BELLY*, ADRIEN
Extruded Positioning Stage
Sold by Servo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ 07866 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com Extruded Positioning Stage The Extruded
Structural Dynamic Behaviour of Tyres
XIX CNIM 15-16/11 Castellón Structural Dynamic Behaviour of Tyres Paul Sas Noise & Vibration Engineering Research Group KU.Leuven, Dept. Mechanical Engineering, Div. PMA Road traffic noise Vehicle noise:
Metallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
Phone: Fax:
www. hi wi n. c om HI WI NCor por at i on 1400Madel i nelane El gi n,i L60124 Phone:8478272270 Fax:8478272291 i nf o@hi wi n. c om www. hi wi n. c om Welcome to HIWIN Welcome to HIWIN Directly driven HIWIN
AGR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Enhanced speed and load capacity
AGR Series Mechanical-Bearing, Worm-Driven Rotary Stage Enhanced speed and load capacity Innovative precision worm-gear assembly (patent pending) provides outstanding accuracy and repeatability over a
ADJUSTING THE REBOUND DAMPING
GP10 OWNERS MANUAL ADJUSTING THE REBOUND DAMPING The rebound damping in your shock absorber controls the extension or return of the back of the bike. - The more rebound damping you have in a damper, the
A double-wishbone type suspension is used in the front. A multi-link type suspension is used in the rear. Tread* mm (in.) 1560 (61.
CHASSIS SUSPENSION AND AXLE CH-69 SUSPENSION AND AXLE SUSPENSION 1. General A double-wishbone type suspension is used in the front. A multi-link type suspension is used in the rear. 08D0CH111Z Specifications
Technical Presentation model
Technical Presentation 2013 model Presentation contents Introduction Engines Chassis Electrical Maintenance Summary Introduction Introduction 2013 RM-Z450/250 ENGINEERING TARGET 1.Meeting new FIM sound
mm. Film dielectric trimmers QUICK REFERENCE DATA
5 mm FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round or hexagonal head Vertical version. APPLICATIONS For consumer and industrial equipment. DESCRIPTION The vanes of the trimmer are
PIglide RM Rotation Stage with Air Bearings
PIglide RM Rotation Stage with Air Bearings Friction-Free, Ideal for Indexing, Positioning, Scanning, Measuring Technology A-62x Cleanroom compatible Motion platform diameter from 50 mm to 300 mm Load
RESULTS OF ACCELERATED LIFE TESTING OF LCLS-II CAVITY TUNER MOTOR
doi:10.18429/jacow-srf2017- RESULTS OF ACCELERATED LIFE TESTING OF LCLS-II CAVITY TUNER MOTOR N. Huque, E. F. Daly, Jefferson Lab, Newport News, VA 23606, USA Y. Pischalnikov, Fermi National Accelerator
LOW SHOCK RELEASE UNIT EASY RESETTABLE AND 100 % REUSABLE. Jens Müller 1, Christoph Zauner 2
LOW SHOCK RELEASE UNIT EAS RESETTABLE AND 100 % REUSABLE Jens Müller 1, Christoph Zauner 2 1 Astrium GmbH, 2 Chair of Lightweight Structures - Technical University of Munich Astrium GmbH, 81663 München
LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm
LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
HIGH LOAD LOW SHOCK RELEASE UNIT (30 kn)
HIGH LOAD LOW SHOCK RELEASE UNIT (30 kn) Jens Müller (1), Christian Anderau (2) (1) Astrium GmbH, 81663 München (Germany), Email: Jens.mueller@astrium.eads.net (2) RUAG Aerospace AG, Widenholzstr. 1, 8304