Pediatric and Positioning Frames

Transcription

1 Pediatric and Positioning Frames Base Frame (Quickie T45) Back Frame (Fixed Back Tilt) (Quickie T45) Back Frame (Reclining Back) (Quickie T45) Frame (Quickie TS) Standard Rigid Seat Frame (Quickie TS) Contracture Rigid Seat Frame (Quickie TS) Standard Growing Seat Frame (Quickie TS) IN THIS SECTION Growing Contracture Seat Frame (Quickie TS) Rigid Base Frame (Regular and Flared) (Quickie TS) Growing Frame (Regular and Flared) (Quickie TS) Frame (Zippie) Frame (Quickie Kidz)

2 BASE FRAME (QUICKIE T45) TSR00X /16 AN WASHER FLAT /16-18 x 1 1/2 BH C/S /16-18 NYLOCK NUT THICK QU 1/4 AN WASHER FLAT QU 1/4-28 NYLOCK NUT THIN /4-28 x 1 1/2 SOC C/S BLK T45 STRUT CLAMP RECESSED /4 WASHER HI COLLAR LOCK ZN T45 STRUT CLAMP THREADED LATERAL STRUT T /4 x 1 1/2 RECT TUBING CAP RECT TUBING CAP SPRING P BASE S/F PNTD T LINK MNTG BLOCK T /4-28 x 2 BH C/S /16-18 NYLOCK NUT THIN T45 TILT PIVOT ROD BLOCK-O-LIFT W/SPRING 200N x BLOCK-O-LIFT W/SPRING 300N x HD T45 GAS SPRING BLOCK /4-28 NUT THIN STUD GAS SPRING MNT (04) LINK T /16-18 x 2 BH C/S SHT THREAD ZP RUBBER STOP /4-20 NUT THIN RECLINE LIMIT BAR AXLE PLATE T /4-28 x 2 BH C/S GAS SPRING PIVOT BRKT /16-18 x 1 BH C/S /16 WASHER TYPE B R SERIES GAS SPRING LEVER T BLOCK-O-LIFT W/O SPRING 200N x BLOCK-O-LIFT W/O SPRING 300N x HD PAGE 2.1 DECEMBER 2005 MANUAL PRODUCTS PARTS MANUAL

3 BACK FRAME (FIXED BACK TILT) (QUICKIE T45) TSR00X03A /4-28 x 1 1/4 BH C/S SHLDR T45 BACK STRUT TUBE QU 1/4-28 NYLOCK NUT THIN /4 x 1 1/2 RECT TUBING CAP RECT TUBING CAP SPRING P T45 FRAME PLUG PLASTIC /16-18 NYLOCK NUT THIN /16 AN WASHER FLAT T45 GAS SPRING MNTG BRKT TOP /16-18 x 1 3/4 BH C/S SHLDR /16-18 NYLOCK NUT THIN STRUT TUBE T /16-18 x 1 1/4 BH C/S STRUT SADDLE T STRUT SADDLE ZP/P5/KZ QUICKIE GRIP INSERT PLUG /4-28 x 1 1/2 BH C/S CYL LOCK LEVER ASSEMBLY T BACK TUBE PNTD T WASHER 5/16 HOLE FRAME BUSHING T45/P3N FIXED BACK PIVOT PLATE /16-18 x 1.82 BH C/S /32 x RIVNUT ZN QU 1/4 AN WASHER FLAT /4-28 x 1 3/4 BH C/S S/A LATCH STUD NEW LATCH STUD SUPPORT BLK QU 1/4-28 NYLOCK NUT THIN CYL LOCK CABLE ASSEMBLY T45 2 7,8, CONVERSION KIT FIXED BACK T45 10, S/A LATCH ASSEMBLY W/BOLT BLK MANUAL PRODUCTS PARTS MANUAL DECEMBER 2005 PAGE 2.2

4 BACK FRAME (RECLINING BACK) (QUICKIE T45) TSR00X02A T45 BACK STRUT TUBE CYL LOCK LEVER ASSEMBLY RECLINER /32 x 5/8 PAN HD PHIL CYL LOCK CABLE ASSEMBLY /4 x 1 1/2 RECT TUBING CAP RECT TUBING CAP SPRING P T45 RELEASE LEVER MNTG BLOCK QU 1/4-28 NYLOCK NUT THIN 2, SPACER 1.00 x.33 x T45 BACK RECLINER BRACKET /16 AN WASHER FLAT /16-18 NYLOCK NUT THIN T45 RECLINER PIVOT ROD T45 GAS SPRING BLOCK GAS SPRING LEVER T T45 GAS SPRING MNTG BRAKET TOP 1, /16-18 x 1 3/4 BH C/S SHLDR /16-24 x 1 1/2 BH C/S STRUT TUBE T CYLINDER BRACKET T STRUT SADDLE T BLOC-O-LIFT 200 N x /16-18 x 1 1/2 BH C/S /4-28 x 1 1/4 BH C/S SHLDR STRUT SADDLE ZP/P5/KZ /4-28 x 1 1/2 BH C/S 2, QUICKIE GRIP INSERT PLUG BACK TUBE PNTD T /16-18 x 1 BH C/S /16 WASHER TYPE BR SERIES FRAME BUSHING T45/P3N BACK PIVOT PLATE T /16-18 x 1.82 BH C/S x RIVNUT GOLD 3, /4-28 x 1 3/4 BH C/S QU 1/4 AN WASHER FLAT S/A LATCH STUD NEW LATCH STUD SUPPORT BLK QU 1/4-28 NYLOCK NUT THIN RECT TUBING CAP SPRING P /4 x 1 1/2 RECT TUBING CAP T45 FRAME PLUG PLASTIC /16-18 x 2 3/4 HEX C/S 4 8,16,17,27, , SEAT S/F PNTD T45 36,38, ,9-15, ,21,23,24, CONV KIT RECLINER BACK T ,45 18, S/A LATCH ASSM BLK W/BOLT CLR PAGE 2.3 DECEMBER 2005 MANUAL PRODUCTS PARTS MANUAL

5 FRAME (QUICKIE TS) (Effective 8/19/96, beginning QT-14956) (Replacement frame for Quickie TS beginning QT /15/95 and prior to QT /19/96) 96 FRAME NO LONGER AVAILABLE- NO PARTS QTS0X96 FRAME TYPE FRAME DEPTH/ BACK POST LOCATION SHORT REGULAR LONG INSERT PLUG.065 RIBS SADDLE 1/4 HOLE SEAT FRAME PNTD QTS (SPECIFY COLOR) S/A LATCH STUD NEW LATCH STUD SUPPORT 2 5A LATCH STUD SUPPORT BLK QU 1/4-28 NYLOCK NUT THIN /16-18 x 1 3/4 BH C/S SHLDR /4-28 NYLOCK NUT 6 QTS00X6B x RIVNUT GOLD TILT BRKT ZP TS QU 1/4 AN WASHER FLAT /4-28 x 2 BH C/S /4-28 x 1 1/2 BH C/S FRAME PNTD QTS (SPECIFY COLOR) INSERT PLUG S/A LATCH ASSEMBLY W/BOLT 4,5A,6, S/A LATCH ASSEMBLY W/BOLT BLK NOTE: FOR LOCKING MECHANISM AND STRUT ASSEMBLY, SEE SECTION 16, MECHANICAL LOCK AND STRUT ASSMEBLIES. MANUAL PRODUCTS PARTS MANUAL DECEMBER 2005 PAGE 2.4

6 STANDARD RIGID SEAT FRAME (QUICKIE TS) (Effective 3/25/99, beginning serial number QT-25025) FRAME TYPE FRAME DEPTH/ BACK POST LOCATION SHORT REGULAR LONG QTS30X SEAT FRAME RIGID SHORT 14" W QTS SEAT FRAME RIGID SHORT 15" W QTS SEAT FRAME RIGID SHORT 16" W QTS 1,9, SEAT FRAME RIGID SHORT 17" W QTS SEAT FRAME RIGID SHORT 18" W QTS SEAT FRAME RIGID SHORT 19" W QTS SEAT FRAME RIGID SHORT 20" W QTS SEAT FRAME RIGID REG 14" W QTS SEAT FRAME RIGID REG 15" W QTS SEAT FRAME RIGID REG 16" W QTS 1A,9, SEAT FRAME RIGID REG 17" W QTS SEAT FRAME RIGID REG 18" W QTS SEAT FRAME RIGID REG 19" W QTS SEAT FRAME RIGID REG 20" W QTS SEAT FRAME RIGID LONG 14" W QTS SEAT FRAME RIGID LONG 15" W QTS SEAT FRAME RIGID LONG 16" W QTS 1B,9, SEAT FRAME RIGID LONG 17" W QTS SEAT FRAME RIGID LONG 18" W QTS SEAT FRAME RIGID LONG 19" W QTS SEAT FRAME RIGID LONG 20" W QTS S/A LATCH STUD NEW LATCH STUD SUPPORT QU 1/4-28 NYLOCK NUT THIN /16-18 x 1 3/4 BH C/S SHOULDER /4-28 x 2 1/4 G8 HEX C/S TILT BRACKET QTS /8" HALF SADDLE 2 HOLE QTS INSERT PLUG.065 RIBS SADDLE 1/4 HOLE x RIVNUT GOLD " WASHER 3/8" HOLE PIVOT STOP SPACER QU 1/4 AN WASHER FLAT QU 1/4-28 NYLOCK NUT FRAME INSERT PLUG QTS S/A LATCH ASSEMBLY W/BOLT 6-8,10, TILT BRACKET W/HDWR QTS PAGE 2.5 DECEMBER 2005 MANUAL PRODUCTS PARTS MANUAL

7 CONTRACTURE RIGID SEAT FRAME (QUICKIE TS) (Contracture Seat Frame is for Contracture Footrest system only) FRAME TYPE FRAME DEPTH/ BACK POST LOCATION SHORT REGULAR LONG QTS30X ST FRM RIGID CNTRCTR SHT 14 W QTS ST FRM RIGID CNTRCTR SHT 15 W QTS ST FRM RIGID CNTRCTR SHT 16 W QTS 1,2, ST FRM RIGID CNTRCTR SHT 17 W QTS ST FRM RIGID CNTRCTR SHT 18 W QTS ST FRM RIGID CNTRCTR SHT 19 W QTS ST FRM RIGID CNTRCTR SHT 20 W QTS ST FRM RIGID CNTRCTR REG 14 W QTS ST FRM RIGID CNTRCTR REG 15 W QTS ST FRM RIGID CNTRCTR REG 16 W QTS 1A,2, ST FRM RIGID CNTRCTR REG 17 W QTS ST FRM RIGID CNTRCTR REG 18 W QTS ST FRM RIGID CNTRCTR REG 19 W QTS ST FRM RIGID CNTRCTR REG 20 W QTS ST FRM RIGID CNTRCTR LNG 14 W QTS ST FRM RIGID CNTRCTR LNG 15 W QTS ST FRM RIGID CNTRCTR LNG 16 W QTS 1B,2, ST FRM RIGID CNTRCTR LNG 17 W QTS ST FRM RIGID CNTRCTR LNG 18 W QTS ST FRM RIGID CNTRCTR LNG 19 W QTS ST FRM RIGID CNTRCTR LNG 20 W QTS " INSERT PLUG.065 RIBS /4-28 x 2 1/4 G8 HEX TILT BRACKET QTS /8" HALF SADDLE " SADDLE 1/4" HOLE x RIVNUT GOLD " WASHER 3/8" HOLE PIVOT STOP SPACER QU 1/4 AN WASHER FLAT QU 1/4-28 NYLOCK NUT FRAME INSERT PLUG QTS 1 3-6, TILT BRACKET W/HDWR QTS 8-12 MANUAL PRODUCTS PARTS MANUAL DECEMBER 2005 PAGE 2.6

8 STANDARD GROWING SEAT FRAME (QUICKIE TS) (Effective 3/25/99, beginning serial number QT-25025) FRAME TYPE FRAME DEPTH/ BACK POST LOCATION SHORT REGULAR LONG QTS30X12A x RIVNUT GOLD INSERT PLUG.065 RIBS S/A LATCH STUD NEW LATCH STUD SUPPORT BLK QU 1/4-28 NYLOCK NUT THIN /16-18 x 1 3/4 BH C/S SHOULDER " SADDLE 1/4" HOLE " WASHER 3/8" HOLE FRAME INSERT PLUG QTS /4-28 x 2 1/4 G8 HEX C/S QU 1/4 AN WASHER FLAT TILT BRACKET QTS /8" HALF SADDLE 2 HOLE QTS PIVOT STOP SPACER QU 1/4-28 NYLOCK NUT BUSHING S/A TS S/A LATCH ASSEMBLY W/BOLT BLK TILT BRACKET W/HDWR QTS SEAT FRAME GROWING SHORT QTS 1,2,6-11, SEAT FRAME GROWING REG QTS SEAT FRAME GROWING LONG QTS PAGE 2.7 DECEMBER 2005 MANUAL PRODUCTS PARTS MANUAL

9 GROWING CONTRACTURE SEAT FRAME (QUICKIE TS) (Contracture Seat Frame is for Contracture Footrest system only) FRAME TYPE FRAME DEPTH/ BACK POST LOCATION SHORT REGULAR LONG QTS30X14A , SEAT FRM GRWNG CNTRC SHT R QTS SEAT FRM GRWNG CNTRC SHT L QTS 1A , SEAT FRM GRWNG CNTRC REG R QTS SEAT FRM GRWNG CNTRC REG L QTS 1B , SEAT FRM GRWNG CNTRC LNG R QTS SEAT FRM GRWNG CNTRC LNG L QTS " INSERT PLUG.065 RIBS x RIVNUT GOLD " WASHER 3/8" HOLE " SADDLE 1/4" HOLE FRAME INSERT PLUG QTS /4-28xX 2 1/4 G8 HEX C/S QU 1/4 AN WASHER FLAT TILT BRACKET QTS /8" HALF SADDLE 2 HOLE QTS PIVOT STOP SPACER QU 1/4-28 NYLOCK NUT TILT BRACKET W/HDWR QTS CNTRC GRW SHRT SEAT FRM PNT QTS 1A CNTRC GRW REG SEAT FRM PNT QTS 1B CNTRC GRW LNG SEAT FRM PNT QTS MANUAL PRODUCTS PARTS MANUAL DECEMBER 2005 PAGE 2.8

10 RIGID BASE FRAME (REGULAR AND FLARED) (QUICKIE TS) (Effective 3/25/99, beginning serial number QT-25025) QTS30X INSERT PLUG BASE FRM RIG STRT SHT 14" W QTS BASE FRM RIG STRT SHT 15" W QTS BASE FRM RIG STRT SHT 16" W QTS 1, BASE FRM RIG STRT SHT 17" W QTS BASE FRM RIG STRT SHT 18" W QTS BASE FRM RIG STRT SHT 19" W QTS BASE FRM RIG STRT SHT 20" W QTS BASE FRM RIG STRT REG 14" W QTS BASE FRM RIG STRT REG 15" W QTS BASE FRM RIG STRT REG 16" W QTS 1,2A BASE FRM RIG STRT REG 17" W QTS BASE FRM RIG STRT REG 18" W QTS BASE FRM RIG STRT REG 19" W QTS BASE FRM RIG STRT REG 20" W QTS BASE FRM RIG STRT LNG 14" W QTS BASE FRM RIG STRT LNG 15" W QTS BASE FRM RIG STRT LNG 16" W QTS 1,2B BASE FRM RIG STRT LNG 17" W QTS BASE FRM RIG STRT LNG 18" W QTS BASE FRM RIG STRT LNG 19" W QTS BASE FRM RIG STRT LNG 20" W QTS BASE FRM RIG FLRD SHT 15" W QTS BASE FRM RIG FLRD SHT 16" W QTS 1,2C BASE FRM RIG FLRD SHT 17" W QTS BASE FRM RIG FLRD SHT 18" W QTS BASE FRM RIG FLRD SHT 19" W QTS BASE FRM RIG FLRD SHT 20" W QTS BASE FRM RIG FLRD REG 14" W QTS BASE FRM RIG FLRD REG 15" W QTS BASE FRM RIG FLRD REG 16" W QTS 1,2D BASE FRM RIG FLRD REG 17" W QTS BASE FRM RIG FLRD REG 18" W QTS BASE FRM RIG FLRD REG 19" W QTS BASE FRM RIG FLRD REG 20" W QTS BASE FRM RIG FLRD LNG 14" W QTS BASE FRM RIG FLRD LNG 15" W QTS BASE FRM RIG FLRD LNG 16" W QTS 1,2E BASE FRM RIG FLRD LNG 17" W QTS BASE FRM RIG FLRD LNG 18" W QTS BASE FRM RIG FLRD LNG 19" W QTS BASE FRM RIG FLRD LNG 20" W QTS PAGE 2.9 DECEMBER 2005 MANUAL PRODUCTS PARTS MANUAL

11 GROWING FRAME (REGULAR AND FLARED) (QUICKIE TS) (Effective 3/25/99, beginning serial number QT-25025) FRAME TYPE FRAME DEPTH/ BACK POST LOCATION SHORT REGULAR LONG QTS30X INSERT PLUG FRAME CLAMP TUBE QTS /16-18 x 2 BH C/S SHT THREAD FRAME CLAMP LOWER WLDMNT QTS /16-18 NYLOCK NUT THIN /4-28 NUT THIN /4-28 x 3/4 HEX C/S BASE FRAME GRWNG STRT SHT QTS BASE FRAME GRWNG STRT REG QTS BASE FRAME GRWNG STRT LNG QTS BASE FRAME GRWNG FLRD SHT QTS BASE FRAME GRWNG FLRD REG QTS BASE FRAME GRWNG FLRD LNG QTS MANUAL PRODUCTS PARTS MANUAL DECEMBER 2005 PAGE 2.10

12 FRAME (ZIPPIE) (Effective 11/13/96) Z00X11A STRUT SADDLE 1 1/8 ZP 2 1A STRUT SADDLE S /4-28 x 1 1/4 BH C/S QU 1/4-28 NYLOCK NUT THIN INSERT PLUG MED CAP /4-28 X 1 5/8 BH C/S W/PATCH S/A LATCH STUD NEW LATCH STUD SUPPORT BLK RIVET POP SSD64SSBS SEAT STOP 2 *NOTE: HDWR ONLY, MUST ORDER CORRECT SIZE STRUT TUBE SEPARATELY. **NOTE: REAR FRAME EXTENSION USED FOR SEAT DEPTHS STRUT TUBE ZP/KZ (TUBE ONLY) 6, ZP/KIDZ GROWTH TUBE KIT (DOES NOT INCLUDE SADDLES) /16-18 x 1 3/4 BH C/S SHLDR 2 14** REAR FRAME EXT ZP 2 1,1A,2-6 * STRUT TUBE HDWR KIT ZP/ 1 1/8 (11-12 ) 1A,2-6 * STRUT TUBE HDWR KIT ZP/KIDZ (13-16 ) 2,3, ZP REAR FRAME EXT 2 W/HDWR 4,5,9, SIDE FRAME ASSEMBLY ZP 1 1/8 10,13 (SPECIFY COLOR) 3,7, S/A LATCH BLOCK ASSM BLK 3,7,8, S/A LATCH ASSEMBLY W/BOLT BLK PAGE 2.11 DECEMBER 2005 MANUAL PRODUCTS PARTS MANUAL

13 FRAME (QUICKIE KIDZ) KDZ00X x RIVNUT GOLD TUBE END BUSHING THIN STRUT SADDLE S /4-28 x 1 1/4 BH C/S QU 1/4-28 NYLOCK NUT THIN STRUT TUBE ZP/KZ A ZP/KIDZ GROWTH TUBE KIT *NOTE: ORDER ITEM 10 FOR CHAIRS WITH 16 WHEELS. PLEASE SEE PAGES 5.8 & 5.9 FOR STANDARD AND REVERS FRAME CONVERSION KITS INSERT PLUG /4-28 X 1 5/8 BH C/S W/PATCH 6 10* FRAME EXT WHEEL LOCKS KIDZ 2 1,2, S/F PNTD KIDZ REG 8-10 DEPTH 7,9 (SPECIFY COLOR) 1,2, S/F PNTD KIDZ LONG DEPTH 7,9A (SPECIFY COLOR) 3-5, STRUT TUBE HDWR KIT ZP/KIDZ MANUAL PRODUCTS PARTS MANUAL DECEMBER 2005 PAGE 2.12

14 PAGE 2.13 DECEMBER 2005 MANUAL PRODUCTS PARTS MANUAL