Parts Catalog Issued: Mar 12, Comet Rocket. Wheelchairs

Transcription

1 Parts Catalog Issued: Mar 2, 208 Comet Rocket Wheelchairs

2 Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. SYMBOL DEFINITION For Customer Service Support Call: For Faxed In Orders Call: or For Technical Service Call: Literature Can Be Found at: or Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. NOTE: NLA = Special Comments = General information pertaining to that specific page = No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers 208 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., and the Medallion Design are registered trademarks and Comet is a trademark of Invacare Corporation. KIK is a registered trademark of KIK Technology, Inc.

3 TABLE of CONTENTS Description Page Number Accessories - Miscellaneous Arms - "T" Arms Arms - AT49 Flip-Back Half Arms... 3 Arms - Cantilever Arms - Half Arms Axle Mounting Plate Hardware Axles and Axle Mounting Plates Back Canes... 7 Back Upholstery Back Upholstery - Adjustable Tension Casters - Front and Mounting Hardware Comet Frame Growth Kits... 2 Comet Mini Tilt Seat Frame and Tilt Hardware... 4 Fabric Clothing Guards Footrest - Adjustable Angle Footrest - Rigid Tubular Forks, Headtubes, and Hardware Frame Finishes and Touch-Up Paint... 4 Frame Hardware... 0 Frames and Crossmembers... 8 Handrim Hardware

4 TABLE of CONTENTS Description Page Number Handrims... 5 Packaging, Literature, and Decals... 6 Rear Upright Tube Mounting Hardware... 9 Rigid Side Guards Seat Pans... 2 Stroller Handles - Clamp On (485) Stroller Handles - Split Non-Adjustable (483) Swing Under Footboard Wheel Locks - High Mount Wheel Locks - High Mount with Hill Holder Wheel Locks - Undermount Wheels - Rear - w/ Handrims - Spoke (After 9//) Wheels - Rear - w/ Handrims - Spoke (Before 9/2/) Wheels - Rear - w/o Handrims - Spoke (After 9//) Wheels - Rear - w/o Handrims - Spoke (Before 9/2/) Wheels - Rear - without Handrims - Composite

5 Frame Finishes and Touch-Up Paint Contemporary Color Numbers Touch-Up Paint (.6 oz.) Color 22P NLA Anthracite 5P 3337-NLA Black Prism 02P 0327-NLA Denim Blue 66P NLA Electric Purple 80P NLA Evergreen with Navy 0P 0325-NLA Jeweled Green 84P NLA Lavender 05P 0326-NLA Midnight Blue 03P 0324-NLA Mocha Frost 33P NLA Red 83P NLA Royal Blue with Grape 60P 038-NLA Silver Metallic 24P NLA Wet Black 29P NLA White Too Hot Color Numbers Touch-Up Paint (.6 oz.) Color 9P NLA Bubblegum Pink 6P NLA Electric Red 8P NLA Fruit Fusion 20P NLA Grape Madness 6P NLA Sunkissed Orange 30P Sunny Yellow 7P NLA Tangerine Red Way Cool Color Numbers Touch-Up Paint (.6 oz.) Color 23P NLA Celestial Purple 22P NLA Cosmic Blue 62P NLA Electric Blue 79P 036-NLA Electric Teal 25P 3338-NLA Emerald Green 27P NLA Grasshopper Green 2P NLA Lolly Pop Blue 26P NLA Shamrock Green 24P NLA Vivid Violet 4

6 Frame Finishes and Touch-Up Paint Sparkle Frame Finishes Color Number 72P 73P 74P 75P 76P 88P Color Twilight Sparkle Gold Sparkle Green Sparkle Blue Sparkle Red Sparkle Wet Black with Twilight Sparkle 5

7 Packaging, Literature, and Decals 6

8 Packaging, Literature, and Decals Item Number Note Part Number Description 2 3 NOTE: Quantity Per Package Assembly 403X0 Carton, Front Riggings NLA NLA - Insert, Carton NLA NLA - Carton, Shipper A NLA NLA - Owner's Manual - Comet A Owner's Manual - Rocket A 0605-NLA NLA - Decal, Black - Comet A NLA NLA - Decal, White - Comet A See Chart Packaging, Literature and Decals A - Not Shown When adjusting or replacing parts please refer to your owners manual for assistance. 7

9 Frames and Crossmembers 8

10 Item Number Note Part Number Description Frames and Crossmembers Quantity Per Package Assembly A,B NL NLA - Frame, Side, Short, Color - Right (7-3" D) A A,B NL NLA - Frame, Side, Short, Color - Left (7-3" D) A A,B NL NLA - Frame, Side, Long, Color - Right (9-6" D) A A,B NL NLA - Frame, Side, Long, Color - Left (9-6" D) A 2 A,C NL NLA - Frame, Rear, Color - Right/ Left 2 A 3 A,C NL NLA - Frame, Front, Swingaway, Color - Right (9-2 A 6" D) 3 A,C NL NLA - Frame, Front, Swingaway, Color - Left (9-2 A 6" D) 3 A,C Frame, Front, Swingaway, Color - Right ( - 8" D) 2 3 A,C Frame, Front, Swingaway, Color - Left ( - 8" D) 2 4 A,C NL NLA - Frame, Front, Fixed 80 Degree " Short, 2 A Color (9-7" D) 4 A,C NL NLA - Frame, Front, Fixed 80 Degree " Short, 2 A Color ( - 9" D) 5 See Chart #5 Crossmembers NOTE: A - Specify frame color when ordering. B - Comet C - Rocket #5 Crossmembers Chair Width 0" " 2" 3" 4" 5" 6" Crossmember NLA NLA Crossmember w/ Cylinder Brackets NLA NLA NLA NLA NLA NLA NLA Crossmember w/ Footrest and Cylinder Brackets NLA NLA NLA NLA NLA NLA NLA 9

11 Frame Hardware 0

12 Item Number Note Part Number Description Frame Hardware Quantity Per Package Assembly Plug Button, Black (") Washer (/4 x /2 x /6") Screw, Hex Head (/4-28 x -3/4") Bearing, Composite (/2") X02 Bearing (/2" I.D. x -/8" O.D.) Bushing, Pivot 7 A Screw, Socket Button Head (/4-20 x -/2") 7 B Screw, Hex Head (/4-28 x -/2") NLA NLA - Locknut (/4-28) Screw, Socket Button Head (/4-28 x -/4") Screw, Hex Head w/ Patch (/4-20 x 2") C Kit, Sector Block - Right C Kit, Sector Block - Left Screw, Socket Set Cone Point (/4-20 x /2") Clamp X03 Anti-Rattle (") NLA NLA - Tube, Insert, Upper 4 NOTE: A - Before /95 B - After 0/95 C - Includes items 2 and 0

13 Comet Frame Growth Kits Comet Growth Kits contain the following parts to grow a chair: Footboard; Release Handle; Frame, Footrest, and Backrest Crossmembers; Set Screws; Seat Pan w/ Hardware; Back Upholstery w/ Hardware; and Tie Wraps. Short Frame Chairs with 90SWUNDER Chair Width 0" " 2" 3" Kit No NLA NLA NLA NLA Short Frame Chairs with 90FTBD Chair Width 0" " 2" 3" Kit No NLA NLA NLA NLA Short Frame Chairs with the Mini-Tilt Option Chair Width 0" " 2" 3" Kit No NLA NLA NLA NLA Short Frame Chairs with 90INDFTPLT Chair Width 0" " 2" 3" Kit No NLA NLA NLA NLA Long Frame Chairs with the Mini-Tilt Option Chair Width Kit No. 0" " 2" 3" 4" 5" 6" NLA NLA NLA NLA NLA NLA NLA 2

14 Comet Frame Growth Kits Comet Growth Kits contain the following parts to grow a chair: Footboard; Release Handle; Frame, Footrest, and Backrest Crossmembers; Set Screws; Seat Pan w/ Hardware; Back Upholstery w/ Hardware; and Tie Wraps. Long Frame Chairs with 90SWUNDER Chair Width Kit No. 0" " 2" 3" 4" 5" 6" NLA NLA NLA NLA NLA NLA Long Frame Chairs with 90INDFTPLT Chair Width Kit No. 0" " 2" 3" 4" 5" 6" NLA NLA NLA NLA NLA NLA NLA Long Frame Chairs with 90FTBD Chair Width Kit No. 0" " 2" 3" 4" 5" 6" NLA NLA NLA NLA NLA NLA NLA 3

15 Comet Mini Tilt Seat Frame and Tilt Hardware 4

16 Comet Mini Tilt Seat Frame and Tilt Hardware Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Lever, Release Tie Wrap (5-5/8" L) NLA NLA - Cable X020 Spacer, Coved (/4 x x 9/6") Washer (/4 x /2 x /6") Screw, Hex Head (/4-28 x -3/4") 4 7 A NL NLA - Rail, Seat Frame, Short, Color 2 A 7 A NL NLA - Rail, Long Frame Seat, Color 2 A Screw, Hex Head (/4-28 x -5/8") NLA NLA - Locknut (/4-28) NLA NLA - Package, Screw, Hex Head (/4-28 x 2") NLA NLA - Bracket, Pivot, Black Spacer, Coved (/4 x /6 x /2") NLA NLA - Cylinder, Lock 4 See Chart #4 Crossmember 5 See Chart #5 Footrest Crossmember B See Chart Mini-Tilt Retrofit Kits NOTE: A - Specify frame color when ordering. B - Not Shown #4 Crossmember 0" Wide NLA " Wide NLA 2" Wide " Wide " Wide " Wide " Wide #5 Footrest Crossmember 0" Wide NLA " Wide NLA 2" Wide NLA 3" Wide NLA 4" Wide NLA 5" Wide NLA 6" Wide NLA Mini-Tilt Retro-Fit Kits 5

17 Comet Mini Tilt Seat Frame and Tilt Hardware Mini-Tilt Retro-Fit Kits Chair Width Small Frame w/o Back Canes 0" NLA " NLA 2" NLA 3" NLA 4" 5" 6" Specify frame color when ordering. Small Frame w/ Back Canes NLA NLA NLA NLA Long Frame w/o Back Canes NLA NLA NLA NLA NLA NLA NLA Long Frame w/ Back Canes NLA NLA NLA NLA NLA NLA NLA 6

18 Back Canes 7

19 Item Number Note Part Number Description Back Canes Quantity Per Package Assembly Grip, Cane B Grip, Handle, Foam, Black (5") Plug Button, Black (3/4") 2 B Plug Button, Black (") 3 C Screw, Socket Button Head (/4-20 x -/4") 3 D NLA NLA - Package, Screw, Hex Head (/4-20 x 3/4") Locknut (/4-20) 5 A NLA NLA - Back Cane Assembly, Sportster, Black - 2 Right/Left 5 A NLA NLA - Back Cane Assembly, Straight, Black - 2 Right/Left 5 A NLA NLA - Back Cane Assembly, 0 Degree Bend, Black 2 - Right/Left Cane, Back, Fixed Height, Black - Right/Left (20" H) 2 NOTE: A - Does not include attaching hardware. Order 2 each of item number 3, part number B - 20" Back Cane Only C - Comet Chairs D - Rocket Chairs 8

20 Rear Upright Tube Mounting Hardware 9

21 Rear Upright Tube Mounting Hardware Item Number Note Part Number Description A 4 B 5 6 NOTE: A - Comet B - Rocket Quantity Per Package Assembly Tip, Plastic, Black Lever, Actuator X020 Spacer, Coved (/4 x x 9/6") 4 05 Spring, Compression (5/8 x x 3/64") Plug, Latch NLA NLA - Package, Screw, Hex Head (/4-28 x 2") Washer (/4 x /2 x /6") Screw, Hex Head (/4-28 x -3/4") Washer, Nylon (/4 x /2 x /32") Locknut (/4-28) NLA NLA - Plate, Backrest Support NLA NLA - Pin, Locking Spacer, Coved (/4 x /6 x /2") Tube, Backrest, Black Tube, Rear Upright, Black (0-4" H) Screw, Set Socket (/4-20 x /4") 2 See Chart #6 Backrest Crossmember #6 Backrest Crossmember 0" Wide NLA " Wide NLA 2" Wide " Wide " Wide " Wide " Wide

22 Seat Pans Seat Pans - Comet chairs Chair Width 7-3" Deep 0-6" Deep 0" NLA NLA " NLA NLA 2" NLA NLA 3" 0526-NLA NLA 4" NLA 5" 0625-NLA 6" NLA 2

23 Seat Pans Seat Pans - Rocket chairs Chair Width 0-4" Deep 2-6" Deep 0" NLA NLA " NLA NLA 2" NLA NLA 3" NLA NLA 4" NLA NLA 5" NLA NLA 6" NLA NLA Item Number Note Part Number Description NOTE: Seat Pan Mounting Hardware Quantity Per Package Assembly A NLA NLA - Hardware, Mounting, Seat Pan 4 Includes: 4 ea. Screws (0-32 x 3/4") A See Chart Seat Pans - Comet A See Chart Seat Pans - Rocket A - Not Shown 22

24 Back Upholstery Rocket Back Upholstery Chair Width 0" " 2" 3" 4" 5" 6" 0-4" High 2-6" High 4-8" High NLA NLA NLA 0449-NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA

25 Back Upholstery Comet Back Upholstery Chair Width 0" " 2" 3" 4" 5" 6" 0-6" Back Height NLA NLA NLA NLA NLA NLA NLA 24

26 Adjustable Tension Back Upholstery 25

27 Adjustable Tension Back Upholstery Back Height Seat Width Back Anchor Hook & Loop Adjuster Back Cover Back Assembly See Note(s) A 062-NLA 0622-NLA " 0-4" 0624-NLA 0622-NLA " 0-4" NLA NLA " 0-4" NLA " 0-4" " 0-4" " 0-4" " 0-4" " 0-4" " 0-4" " 0-4" " 0-4" NLA NLA NLA " 2-6" NLA NLA " 2-6" " 2-6" " 2-6" " 2-6" " 2-6" " 2-6" " 2-6" " 2-6" NLA NLA NLA " 4-8" NLA NLA " 4-8" " 4-8" " 4-8" " 4-8" " 4-8" " 4-8" " 4-8" " 4-8" NLA " 20" " 20" " 20" " 20" " 20" " 20" " 20" 26

28 NOTE: Adjustable Tension Back Upholstery A - Back Assembly includes: Back Anchor, Hook & Loop Adjuster, Back Cover, and Instruction Sheet. 27

29 Adjustable Tension Back Upholstery Adjustable Tension Back Hardware Item Number Note Part Number Description NOTE: Quantity Per Package Assembly A Package, Screw with Washer (#0 x 7/8") (Pair) 2 A,B NLA NLA - Instruction Sheet, Adjustable Tension Back Upholstery A See Chart Back Upholstery -Adjustable Tension A - Not Shown B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 28

30 Half Arms and Hardware 29

31 Item Number Note Part Number Description Half Arms and Hardware Quantity Per Package Assembly A Kit, Arm Pad w/ Screws, Desk Length (Pair) Grip, Foam Hand (9" L) Grip, Foam - Full Length Package, Screw Phillips Pan Head (#0-32 x -3/8") Half Arm Tube - Right Half Arm Tube - Left Socket, Arm, Rear - Right Socket, Arm, Rear - Left Sleeve, Bearing Screw, Hex Head (/4-28 x -3/4") Locknut (/4-28) Washer (/4 x /2 x /6") Washer (/4 x 23/32 x /6") NLA NLA - Package, Screw, Hex Head (/4-28 x 2") X020 Spacer, Coved (/4 x x 9/6") 2 2 B NLA NLA - Half Arm Mounting Hardware NOTE: A - Specify U67 upholstery color when ordering. B - Includes items 4-30

32 AT49 Flip-Back Half Arms 3

33 Item Number Note Part Number Description AT49 Flip-Back Half Arms Quantity Per Package Assembly A Kit, Arm Pad w/ Screws, Desk Length (Pair) Screw, Phillips Pan Head (#0-32 x -3/8") Plug Button, Black (3/4") Tube, Arm, Extension, Black NLA NLA - Tube, Insert NLA NLA - Half Arm Tube w/o Hardware - Right NLA NLA - Half Arm Tube w/o Hardware - Left NLA NLA - Package, Screw, Hex Head (/4-20 x 3/4") NLA NLA - Plug, Arm Tube, Black NLA NLA - Cap, End, Vinyl, Black Screw, Hex Head (/4-28 x -3/4") Washer (/4 x /2 x /6") NLA NLA - Snap, Armrest NLA NLA - Bearing, Flanged Composite NLA NLA - Bracket, Armrest Mounting, Black Locknut (/4-28) 25 4 B,C NLA NLA - Half Arm Assembly w/ Hardware - Right B,C NLA NLA - Half Arm Assembly w/ Hardware - Left B,D NLA NLA - Half Arm Mounting Hardware NOTE: A - Specify U67 upholstery color when ordering. B - Not Shown C - Includes Items 3-9. D - Includes Items

34 "T" Arms 33

35 Item Number Note Part Number Description A A B 5 B 6 7 B C,E "T" Arms Quantity Per Package Assembly Kit, Arm Pad w/ Screws, Desk Length (Pair) Kit, Arm Pad w/ Screws, Full Length (Pair) Package, Screw Phillips Pan Head (#0-32 x -3/8") Plug Button, Black (7/8") Nut, Hex (/4-28) Washer (/4 x /2 x /6") Bracket, T-Arm Socket, Threaded, Black Screw, Hex Head (/4-28 x -3/4") Lockwasher (/4 x 5/32 x /64") Screw, Socket Button Head (/4-28 x 3/4") NLA NLA - Bracket, Socket, Black Insert, Arm Socket, Black NLA NLA - Clamp, "T" Arm Socket - Outside Clamp, "T" Arm Socket - Inside Screw, Hex Head (/4-28 x -/2") Lever, Actuator Guard, Clothing, High Range Guard, Clothing, Low Range NLA NLA - Tube, Support, High Range, Black - Right Tube, Support, High Range, Black - Left Grip, Foam Locknut (#0-32) Lever, Locking NLA NLA - Package, Screw, Phillips Pan Head (#0-32 x 25 /6") NLA NLA - Spring, Torsion Screw, Socket Button Head (/4-20 x /2") NLA NLA - Clamp, Clothing Guard - Right NLA NLA - Clamp, Clothing Guard - Left T-Arm Assembly w/ Plug Buttons, Desk Length, Low Range, Black T-Arm Assembly w/ Plug Buttons, Full Length, Low Range, Black T-Arm Assembly w/ Plug Buttons, Desk Length, High Range, Black T-Arm Assembly w/ Plug Buttons, Full Length, High Range, Black Kit, Clothing Guard, High Range - Right Kit, Clothing Guard, High Range - Left Kit, Clothing Guard, Low Range - Right Kit, Clothing Guard, Low Range - Left Post, Arm, High Range Post, Arm, Low Range Arm Socket Assembly, Bolt On 34

36 Item Number Note Part Number Description "T" Arms Quantity Per Package Assembly 29 D,F Arm Socket Assembly, Clamp On G See Chart "T" Arm Kits NOTE: A - Specify U67 upholstery color when ordering. B - Items 7, 8 and 20 must be ordered together for chairs manufactured before 8/3/99 due to a change in hardware. C - After 7/4/97 D - Before 7/5/97 E - Includes Items 4-. F - Includes Items 5, 8, 9, 2-4. G - Includes items, 2 and "T" Arm Kits Kits Include Items,2,25-27 Part Number Specify U67 upholstery color when ordering. Arm Style Desk Length, Pediatric ( Pair) Desk Length, Adult ( Pair) Full Length, Pediatric ( Pair) Full Length, Adult ( Pair) 35

37 Cantilever Arms Desk Length 36

38 Item Number Note Part Number Description Cantilever Arms Desk Length Quantity Per Package Assembly Locknut (/4-28) Washer (/4 x /2 x /6") 2 3 A Kit, Arm Pad w/ Screws, Desk Length (9" L x 2" W) 2 (Pair) Tube, Arm, Extension, Black Plug Button, Black (") Screw, Phillips Pan Head (#0-32 x -3/8") Tube, Slide, Cantilever Arm, Black Tip, Plastic, Black Washer, Nylon (/4 x /2 x /32") Lever, Actuator Screw, Hex Head (/4-28 x 3") Tube, Arm, Black 3 05 Spring, Compression (5/8 x x 3/64") X020 Spacer, Coved (/4 x x 9/6") Screw, Hex Head (/4-28 x -3/4") Washer, Nylon (3/8 x 7/8 x /6") Plug, Latch NLA NLA - Pin, Locking Bracket, Armrest Mounting, Black Spacer, Coved (/4 x /6 x /2") Screw, Allen Head (/4-20 x ") Clamp, Half, Non-Threaded Clamp, Half, Threaded NLA NLA - Screw, Hex Head (/4-28 x 3/4") Screw, Hex Head (/4-28 x 2") Arm Support, Clamp On 27 B NLA NLA - Arm, Cantilever, Bolt On w/ Arm Pad - Right 27 B NLA NLA - Arm, Cantilever, Bolt On w/ Arm Pad - Left 28 C NLA NLA - Arm, Cantilever, Clamp On w/ Arm Pad - Right 28 C NLA NLA - Arm, Cantilever, Clamp On w/ Arm Pad - Left D Instruction Sheet, Cantilever Arm NOTE: A - Specify upholstery color U67 Black when ordering. B - Includes items -20 plus Instruction Sheet C - Includes items, 3-0, 2-4, 6-9, 2-26 and Instruction Sheet. D - Not Shown 37

39 Caster Wheels and Mounting Hardware 38

40 Caster Wheels and Mounting Hardware Caster Hardware Wheel Style Wheel Size Tire Type # Axle #2 Locknut #3 Axle Spacer Composite Composite Composite Composite 3"/5" 6" 6" 6" Urethane Urethane Semi Pneumatic Pneumatic Caster Wheels Wheel Style AT900 5ALUM AT90 AT902 Wheel Size 3" 5" 5" 6" TIRE TYPE Urethane Urethane Urethane Urethane 6PNEU 6" Pneumatic NOTE: A - Consists of (2) Casters. Bearing 407X X X X026 Bearing Spacer Wheel Single # See Note(s) A Tire Tube/ Insert NLA 0260-NLA 6" Pneumatic Wheels with Flat-Free Inserts are no longer Available (NLA). If a customer requires a pair, order a pair of 6" Composite Urethane Wheels. If a customer requires only one 6" Pneumatic wheel with a Flat-Free insert, you will need to order a pair of 6" Composite Urethane Wheels so that both front wheels will match. 39

41 Caster Forks, Headtubes and Hardware 40

42 Caster Forks, Headtubes and Hardware Item Number Note Part Number Description Quantity Per Package Assembly Headtube, Caster, Black - Right Headtube, Caster, Black - Left 407X02 Bearing (/2" I.D. x -/8" O.D.) Locknut (/4-28) Washer (/4 x /2 x /6") Cam, Headtube Adjustment Without Transport Option (/4-28 x ") Plug Button, Headtube, Black Locknut (/2-20) Washer (/2 x 7/8 x 3/64") Spacer (/2 x 3/4 x ") Spacer (/2 x 3/4 x 2") Kit, Fork w/ Hardware (3" Caster) Kit, Fork w/ Hardware, " Extension (3 and 5" Caster) Kit, Fork with Hardware and 2" Spacer (3" Caster) Kit, Fork w/ Hardware (5" Caster) Kit, Fork w/ Hardware, " Extension (5 and 6" Caster) Kit, Fork w/ Hardware (6 and 6 x " Casters) 4

43 Axles and Axle Mounting Plates 42

44 Item Number Note Part Number Description Axles and Axle Mounting Plates Quantity Per Package Assembly A Nut, Hex (3/4-6) 2 2 A Washer, Steel (3/4 x -/4 x /6") 2 3 A Bushing, Axle Axle, Quick Release (/2 x 4-/2") Axle, Quad Release Plate, Axle Mounting 7 B NLA NLA - Plate, Axle Mounting, Slotted - Right 7 B NLA NLA - Plate, Axle Mounting, Slotted - Left 7 B NLA NLA - Plate, Axle Mounting, Extended, Slotted - Right 7 B NLA NLA - Plate, Axle Mounting, Extended, Slotted - Left NOTE: A - Comet chairs built Before /9/96 had a 5/8" diameter Bushing, Nut, and Washer. Those items are NLA. When these parts are requested order item 7 Axle Mounting Plate with Hardware. B - Includes items -3 43

45 Axle Mounting Plate Hardware 44

46 Item Number Note Part Number Description Axle Mounting Plate Hardware Quantity Per Package Assembly NLA NLA - Screw, Hex Head (/4-28 x 2-/2") Washer (/4 x /2 x /6") Washer (/4 x 23/32 x /6") X020 Spacer, Coved (/4 x x 9/6") Locknut (/4-28) 3 45

47 Composite Rear Wheels (without Handrims) Wheel Style Wheel Size Tire Type Wheel Single # Tire 6COM 6 x -3/4" Pneumatic COM 6 x -3/4" Pneumatic w/ Flat Free COM 8 x -3/4" Pneumatic COM 8 x -3/4" Pneumatic w/ Flat Free COM 20 x -3/8" Pneumatic COM 20 x -3/8" Pneumatic w/ Flat Free COM 20 x -/4" Urethane COM 22 x -/4" Urethane COM 22 x -3/8" Pneumatic COM 22 x -3/8" Pneumatic w/ Flat Free COM7 24 x -/4" Urethane COM7 24 x -3/8" Pneumatic X060 24COM7 24 x -3/8" Pneumatic w/ Flat Free X060 24COM7 24 x -/4" KIK NOTE: A - Flat Free Insert is not available as a separate service part. Tube/ Insert See Note(s) A X Bearing 407X X X X X X X X X X X X X X022 Hub Spacer

48 Spoke Rear Wheels (w/o Handrims) (After 9//) Wheel Wheel Style Wheel Size Tire Type Tire Tube Insert Bearing Hub Spacer w/o Hdrm. 20ITESPK 20" Pneumatic ITESPK 20" Pneumatic w/ Flat Free ITESPK 22" Pneumatic ITESPK 22" Pneumatic w/ Flat Free SP 24 x -3/8" Pneumatic 5660 See Note(s) A 4076X X06 407X SP 24 x -3/8" Pneumatic 6707 w/ Flat Free See Note(s) A 4076X X ITESPK 24" Pneumatic SP 24 x -/4" Continental 6705-NLA NLA See Note(s) A 407X SP 24 x -/4" KIK 42 See Note(s) A X NOTE: A - As of /08/02 these wheels now have a Black finish. For chairs built Before /08/02, it is recommended when one wheel is requested that the wheels be replaced in pairs. 47

49 Spoke Rear Wheels (w/o Handrims) (Before 9/2/) Wheel Style Wheel Size Tire Type Wheel w/o Hdrm. Tire Tube Insert Bearing Hub Spacer 20SP 20 x -3/8" Pneumatic 5585-NLA See Note(s) A X SP 20 x -3/8" Pneumatic 5589-NLA w/ Flat Free See Note(s) A X SP 22 x -3/8" Pneumatic 5656-NLA See Note(s) A X SP 22 x -3/8" Pneumatic 5658-NLA w/ Flat Free See Note(s) A X SP 24 x -3/8" Pneumatic 5660 See Note(s) A 4076X X06 407X SP 24 x -3/8" Pneumatic 6707 w/ Flat Free See Note(s) A 4076X X SP 24 x -3/8" Primo 5662-NLA See Note(s) A X SP 24 x -/4" Continental 6705-NLA NLA See Note(s) A 407X SP 24 x -/4" KIK 42 See Note(s) A X NOTE: A - As of /08/02 these wheels now have a Black finish. For chairs built Before /08/02, it is recommended when one wheel is requested that the wheels be replaced in pairs. 48

50 Spoke Rear Wheels (w/ Handrims) (After 9//) Wheel Style Tire Type Anodized Aluminum Grey Plastic Coated Black Plastic Coated 8 Vertical Projection 8 Oblique Projection 20ITESPK Pneumatic SP Pneumatic NLA NLA w/ Flat Free See Note(s) A See Note(s) A 22ITESPK Pneumatic 7680 See Note(s) A See Note(s) A 22SP Pneumatic with NLA NLA Flat Free See Note(s) A See Note(s) A See Note(s) A 24SP Pneumatic NLA 5428-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A 24SP Pneumatic with NLA 5430-NLA NLA Flat Free See Note(s) A See Note(s) A See Note(s) A See Note(s) A 24SP Primo 5602-NLA NLA 5432-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A 24SP Continental 5606-NLA 5607-NLA 5433-NLA 5434-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A 24SP KIK NLA 5448-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A NOTE: A - As of /8/02 these wheels now have a Black finish. For chairs built Before /8/02, it is recommended when one wheel is requested that the wheels be replaced in pairs. When ordering a Spoke Wheel with Handrim attached, the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside mounting holes to reduce the overall width of the chair, you must order the wheel and handrim assembled inside as a special order. 49

51 Spoke Rear Wheels (w/ Handrims) (Before 9/2/) Wheel Style NOTE: 20SP 20SP 22SP 22SP 24SP 24SP 24SP 24SP 24SP Tire Type Anodized Aluminum 5584-NLA Grey Plastic Coated Black Plastic Coated 5423-NLA 8 Vertical Projection 8 Oblique Projection Pneumatic NLA See Note(s) A See Note(s) A Pneumatic NLA NLA w/ Flat Free See Note(s) A See Note(s) A Pneumatic 5588-NLA 559-NLA 5425-NLA NLA See Note(s) A See Note(s) A See Note(s) A Pneumatic with NLA NLA Flat Free See Note(s) A See Note(s) A See Note(s) A Pneumatic NLA 5428-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A Pneumatic with NLA 5430-NLA NLA Flat Free See Note(s) A See Note(s) A See Note(s) A See Note(s) A Primo 5602-NLA NLA 5432-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A Continental 5606-NLA 5607-NLA 5433-NLA 5434-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A KIK NLA 5448-NLA NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A A - As of /8/02 these wheels now have a Black finish. For chairs built Before /8/02, it is recommended when one wheel is requested that the wheels be replaced in pairs. When ordering a Spoke Wheel with Handrim attached, the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside mounting holes to reduce the overall width of the chair, you must order the wheel and handrim assembled inside as a special order. 50

52 Handrims Non Projection Handrims NOTE: Wheel Style 6COM 8COM 20COM 20SP 22COM 22SP 24COM7 Anodized Aluminum NLA Grey Plastic Coated NLA See Note(s) A NLA See Note(s) A NLA See Note(s) A NLA See Note(s) A NLA Black Plastic Coated See Note(s) B See Note(s) B See Note(s) A 24SP NLA See Note(s) A A - Grey plastic coated handrim is no longer available; if a replacement is needed, order the black plastic coated as replacement in pairs so the handrims on both sides of the chair match. B - These handrims are black wrinkle coated Projection Handrims Wheel Style 8 Vertical Projections (Grey) 8 Oblique Projections (Grey) 2 Vertical Projections (Grey) 8 Vertical Projections (Black) 8 Oblique Projections (Black) 2 Vertical Projections (Black) 6COM 8COM 20COM 20SP 22COM NLA See Note(s) A SP NLA See Note(s) A COM NLA NLA NLA See Note(s) A See Note(s) A See Note(s) A SP NLA See Note(s) A See Note(s) A NOTE: A - Grey plastic coated handrim is no longer available; if a replacement is needed, order the black plastic coated as replacement in pairs so the handrims on both sides of the chair match. 5

53 Handrim Hardware (Hardware Kits To Attach A Single Handrim Only) Wheel Style 6COM 8COM 20COM 20SP 22COM 22SP 24COM7 24SP Anodized Aluminum Grey/Black Plastic Coated Vertical Projections Oblique Projections Vertical Projections

54 Undermount Wheel Lock 53

55 Item Number Note Part Number Description Undermount Wheel Lock Quantity Per Package Assembly Clamp, Wheel Lock, Threaded (") Clamp, Wheel Lock, Non-Threaded (") Screw, Allen Head (/4-20 x ") NLA NLA - Locknut (/4-28) NLA NLA - Bracket, Mounting, Black - Right NLA NLA - Bracket, Mounting, Black - Left NLA NLA - Spring, Torsion - Right NLA NLA - Spring, Torsion - Left NLA NLA - Spacer NLA NLA - Bushing NLA NLA - Screw, Allen Button Head (/4-28 x ") NLA NLA - Link, Wheel Lock, Black NLA NLA - Handle, Wheel Lock, Black Washer, Nylon (/4 x /2 x /32") NLA NLA - Shoe, Wheel Lock Washer (/4 x /2 x /32") Screw, Socket Button Head (/4-28 x -/4") 2 6 A,B Wheel Lock, Undermount - Right 6 A,B Wheel Lock, Undermount - Left NOTE: A - On the Rocket, this wheel lock can only be used on a Fixed Front Frame model. B - Includes items

56 High Mount Wheel Locks 55

57 Item Number Note Part Number Description High Mount Wheel Locks Quantity Per Package Assembly Tip, Plastic, Black NLA NLA - Locknut (/4-28) Spacer (/4 x /2 x /2") Washer, Nylon (/4 x /2 x /32") Screw, Socket Button Head (/4-28 x -/4") Screw, Socket Button Head (/4-28 x 5/8") NLA NLA - Handle, Wheel Lock, Black - Right NLA NLA - Handle, Wheel Lock, Black - Left NLA NLA - Shoe, Wheel Lock NLA NLA - Screw, Button Head Cap (/4-28 x 7/8") NLA NLA - Spacer (/4 x /2 x 5/32") NLA NLA - Strap, Wheel Lock NLA NLA - Link, Stop, Black NLA NLA - Wheel Lock Assembly, Right NLA NLA - Wheel Lock Assembly, Left Locknut (/4-28) NLA NLA - Handle, Wheel Lock, Black Screw, Hex Head (/4-28 x 2-/4") Screw, Socket Button Head (/4-28 x 3/4") NLA NLA - Link, Remote, Short, Black (6" Wheel) NLA NLA - Link, Remote, Long, Black (20" Wheel) 9 A NLA NLA - Wheel Lock Hardware (6" Wheel) 9 A NLA NLA - Wheel Lock Hardware (20" Wheel) NOTE: A - Comet chairs only 56

58 High Mount Wheel Lock with Hill Holder 57

59 High Mount Wheel Lock with Hill Holder Item Number Note Part Number Description C C Quantity Per Package Assembly NLA NLA - Strap, Wheel Lock NLA NLA - Locknut (/4-28) Spacer (/4 x /2 x /2") Washer, Nylon (/4 x /2 x /32") NLA NLA - Spring, Torsion - Right 0665-NLA NLA - Spring, Torsion - Left NLA NLA - Screw, Button Head Cap (/4-28 x 7/8") 0284-NLA NLA - Spacer (/4 x /2 x 5/32") NLA NLA - Link, Stop, Black Tip, Plastic, Black NLA NLA - Handle, Wheel Lock, Black - Right NLA NLA - Handle, Wheel Lock, Black - Left Bracket Assembly, Black - Right NLA NLA - Bracket Assembly, Black - Left Shoe, Wheel Lock Screw, Socket Button Head (/4-28 x 5/8") Screw, Socket Button Head (/4-28 x -/4") 0397 Washer, Nylon (/4 x 7/6 x 5/64") Hill Holder Assembly w/ Hardware - Right NLA - Strap, Wheel Lock Locknut (/4-28) 5 Spacer (/4 x /2 x /2") Washer, Nylon (/4 x /2 x /32") 7 NLA - Spring, Torsion - Right NLA - Screw, Button Head Cap (/4-28 x 7/8") NLA - Spacer (/4 x /2 x 5/32") NLA - Link, Stop, Black Tip, Plastic, Black NLA - Handle, Wheel Lock, Black - Right Bracket Assembly, Black - Right Shoe, Wheel Lock Screw, Socket Button Head (/4-28 x 5/8") 2 Screw, Socket Button Head (/4-28 x -/4") Washer, Nylon (/4 x 7/6 x 5/64") Hill Holder Assembly w/ Hardware - Left NLA - Strap, Wheel Lock Locknut (/4-28) 5 Spacer (/4 x /2 x /2") Washer, Nylon (/4 x /2 x /32") 7 NLA - Spring, Torsion - Left NLA - Screw, Button Head Cap (/4-28 x 7/8") NLA - Spacer (/4 x /2 x 5/32") NLA - Link, Stop, Black 58

60 High Mount Wheel Lock with Hill Holder Item Number Note Part Number Description Quantity Per Package Assembly 9 Tip, Plastic, Black 0 NLA - Handle, Wheel Lock, Black - Left NLA - Bracket Assembly, Black - Left 2 Shoe, Wheel Lock 3 Screw, Socket Button Head (/4-28 x 5/8") 2 4 Screw, Socket Button Head (/4-28 x -/4") 5 Washer, Nylon (/4 x 7/6 x 5/64") Screw, Allen Head (/4-20 x ") 8 A,B 0384 Clamp, Wheel Lock, Non-Threaded (7/8") 8 A,B 0383 Clamp, Wheel Lock, Threaded (7/8") 8 A,B Clamp, Wheel Lock, Non-Threaded (") 8 A,B Clamp, Wheel Lock, Threaded (") NOTE: A - In order to assemble, the non-threaded clamp is above the seat rail or frame and the threaded is below the seat rail or frame. B - Wheel Locks can be mounted either on the seat rails or the frame - FACTORY SET ORIGINALLY. Frames use the 7/8" clamp and seat rails use the " clamp. C - Includes items

61 Swing Under Footboard 60

62 Item Number Note Part Number Description Swing Under Footboard Quantity Per Package Assembly Screw, Socket Button Head (/4-28 x -/4") NLA NLA - Screw, Allen Button Head (/4-28 x ") Screw, Socket Button Head (/4-28 x 3/4") Screw, Socket Button Head (/4-28 x 5/8") Washer, Nylon (/4 x /2 x /32") Locknut (/4-28) NLA NLA - Handle, Release, Black (0" W) NLA NLA - Handle, Release, Black (" W) NLA NLA - Handle, Release, Black (2" W) NLA NLA - Handle, Release, Black (3" W) NLA NLA - Handle, Release, Black (4" W) NLA NLA - Handle, Release, Black (5" W) NLA NLA - Handle, Release, Black (6" W) NLA NLA - Link, Black NLA NLA - Bushing NLA NLA - Bar, Support, Black 0284-NLA NLA - Spacer (/4 x /2 x 5/32") NLA NLA - Plug, Footplate Mounting, Black (3/4 x 2-5/8") Clamp, Footplate NLA NLA - One Piece Footboard Assembly (0-" W) NLA NLA - One Piece Footboard Assembly (2-3" W) NLA NLA - One Piece Footboard Assembly (4-5" W) NLA NLA - One Piece Footboard Assembly (6" W) NLA NLA - Screw, Socket Flat Head (/4-28 x -/2") Locknut (/4-28) Washer (/4 x /2 x /6") NLA NLA - Screw, Hex Head (/4-28 x ") NLA NLA - Bar, Footrest Support NLA NLA - Spacer 3 See Chart #2 Swing Under Footboard #2 Swing Under Footboard Kits (These kits are used for either Short Frame or Long Frame chairs) 0" Wide NLA " Wide NLA 2" Wide NLA 3" Wide NLA 4" Wide NLA 5" Wide NLA 6" Wide NLA 6

63 Rigid Tubular Footrest 62

64 Item Number Note Part Number Description Rigid Tubular Footrest Quantity Per Package Assembly 0269 Screw, Socket Set Cone Point (/4-20 x /2") Clamp Collar, Anti-Rattle 2 See Chart #4 Rigid Tubular Footrest #4 Rigid Tubular Footrest To order a built up rigid tubular footrest, order the footrest tube, and specify number of inches for the build up, and order as special. 0" Wide NLA " Wide NLA 2" Wide NLA 3" Wide NLA 4" Wide NLA 5" Wide NLA 6" Wide NLA 63

65 Adjustable Angle Footrest 90INDFTPLT and 90FTBD 64

66 Item Number Note Part Number Description Adjustable Angle Footrest 90INDFTPLT and 90FTBD Quantity Per Package Assembly A,E NLA NLA - Footplate Assembly, Adjustable Angle 2 (0-3" W) (Pair) A,F NLA NLA - Footplate Assembly, Adjustable Angle 2 (4-5" W) (Pair) A,G NLA NLA - Footplate Assembly, Adjustable Angle (6" 2 W) (Pair) 2 B,C NLA NLA - One Piece Adjustable Angle Footboard Assembly (0-" W) 2 B,D NLA NLA - One Piece Adjustable Angle Footboard Assembly (2-3" W) 2 B,F NLA NLA - One Piece Adjustable Angle Footboard Assembly (4-5" W) 2 B,G NLA NLA - One Piece Adjustable Angle Footboard Assembly (6" W) 3 E,H 357 Footplate, Adjustable Angle, Small, Black (3-/4" W 2 x 8" L) 3 F,H 3572 Footplate, Adjustable Angle, Medium, Black (4-/4" 2 W x 8" L) 3 G,H 3573 Footplate, Adjustable Angle, Large, Black (5-/4" W 2 x 8" L) 4 C NLA NLA - One Piece Footboard Assembly (0-" W) 4 D NLA NLA - One Piece Footboard Assembly (2-3" W) 4 F NLA NLA - One Piece Footboard Assembly (4-5" W) 4 G NLA NLA - One Piece Footboard Assembly (6" W) Clamp, Half, Threaded Clamp, Half, Non-Threaded Plug Button, Black (3/4") Screw, Allen Head (/4-20 x ") Washer, Nylon (/4 x 7/6 x 5/64") Locknut (/4-28) Clamp, Footplate Lockwasher, High Collar (/4") Screw, Socket Flat Head (/4-20 x 3/4") NLA NLA - Tube, Support, Footplate, Black 2 NOTE: A - Includes items 3 and 5 thru 4. B - Includes items 4 and 5 thru 4. C - 0-" wide chairs D - 2-3" wide chairs E - 0-3" wide chairs F - 4-5" wide chairs G - 6" wide chairs H - This footplate was revised 9/2/2008 with rounder corners and accessory holes changed from 8 to 4. Recommended to replace footplate in pairs to match sides. 65

67 Clamp On Stroller Handles

68 Clamp On Stroller Handles Item Number Note Part Number Description Quantity Per Package Assembly Grip, Foam (8") Handle, Stroller, Black X000 Rivet (3/6 x 7/6") Pin, Quick Release with Lanyard NLA NLA - Bracket, Mounting NLA NLA - Clamp, Half Screw, Hex Head (/4-28 x -/4") NLA NLA - Screw, Hex Head (/4-28 x 2-/2") Without Transport Option (/4-28 x ") NLA NLA - Package, Screw, Hex Head (/4-20 x 3/4") NLA NLA - Locknut (/4-28) A NLA NLA - Stroller Handle Assembly, Black (Pair) 2 NOTE: A - Includes Items -. 67

69 Split Non-Adjustable Stroller Handles

70 Split Non-Adjustable Stroller Handles -483 Item Number Note Part Number Description Quantity Per Package Assembly Grip, Foam Hand (9" L) Plug Button, Black (") 3 A NLA NLA - Handle, Stroller, Black - Right 3 A NLA NLA - Handle, Stroller, Black - Left 4 B NLA NLA - Handle, Stroller, Black - Right 4 B NLA NLA - Handle, Stroller, Black - Left X000 Rivet (3/6 x 7/6") NLA NLA - Tube, Insert Pin, Quick Release with Lanyard NLA NLA - Anti-Rattle (") 9 A,C Stroller Handle Assembly 0 B,D NLA NLA - Stroller Handle Assembly NOTE: A - Used with Fixed Height Back Canes B - Used with Adjustable Height Back Canes C - Includes items -3,5-7 D - Includes items,2,4,5,7,8 69

71 Fabric Clothing Guards 70

72 Item Number Note Part Number Description Fabric Clothing Guards Quantity Per Package Assembly A NLA NLA - Protector, Clothing, Fabric - Right A NLA NLA - Protector, Clothing, Fabric - Left B NLA NLA - Protector, Clothing, Fabric - Right B NLA NLA - Protector Clothing, Fabric - Left C NL NLA - Protector, Clothing, Fabric - Right A C NL NLA - Protector, Clothing, Fabric - Left A D Protector, Clothing, Fabric - Right D Protector, Clothing, Fabric - Left Cord, Nylon (6-/2 ft.) Lock, Cord, Black NLA NLA - Ring, "D" 2 NOTE: A - 7-" deep chairs B - 2-3" deep chairs C - 4-5" deep chairs D - 6-8" deep chairs 7

73 Rigid Side Guards 72

74 Item Number Note Part Number Description Rigid Side Guards Quantity Per Package Assembly Clamp, Half, Threaded Clamp, Half, Non-Threaded Washer, Nylon (/4 x 7/6 x 5/64") Screw, Socket Head (/4-20 x -/4") Guard, Side, Small w/o Quad Hole - Right (6-/4" H x -/4" D) Guard, Side, Small w/o Quad Hole - Left (6-/4" H x -/4" D) Guard, Side, Small w/ Quad Hole - Right (6-/4" H x -/4" D) Guard, Side, Small w/ Quad Hole - Left (6-/4" H x -/4" D) Guard, Side, Large w/o Quad Hole - Right (7-3/4" H x 2-3/8" D) Guard, Side, Large w/o Quad Hole - Left (7-3/4" H x 2-3/8" D) Guard, Side, Large w/ Quad Hole - Right (7-3/4" H x 2-3/8" D) Guard, Side, Large w/ Quad Hole - Left (7-3/4" H x 2-3/8" D) 5 A Kit, Side Guard Hardware (Pair) 2 NOTE: A - Includes Items

75 Miscellaneous Accessories Part Number Description Package Quantity Assembly Quantity NLA Anti-Tipper - Short Frame Chairs 2 w/ 0-3/4" Seat to Floor NLA Anti-Tipper - Short Frame Chairs w/ -3/4" Seat to Floor and 2 All Long Frame Chairs NLA Back Pack (Comet) Back Pack (2-5" Wide) " W x 3" H x 4" D Back Pack (6" Wide) 4" W x 2" H x 4" D Calf Strap - 2-5" Wide (26") Calf Strap -6" Wide (36") Clamp with Hardware, 3/4" to " Crutch/Cane Carrier 0360 Heel Loops ( Pair) NLA Heel Loops w/ Ankle Straps ( Pair) See Note(s) A Impact Guard, 2" Long Protector, Frame, Front, Blue Protector, Frame, Back, Blue NLA Protector, Frame, Front, Silver NLA Protector, Frame, Back, Silver Protector, Frame, Front, Red Protector, Frame, Back, Red Protector, Frame, Front, Black Protector, Frame, Back, Black Positioning Strap, Auto Syle -Rainbow Positioning Strap, Hook & Loop -Black NLA Positioning Strap, Hook & Loop -Rainbow 74

76 Miscellaneous Accessories Part Number Description Package Quantity Assembly Quantity NOTE: Seat Pouch 8-/2" W x 7" H x 4" D NLA Spoke Guard -20" Wheels NLA Spoke Guard -22" Wheels Spoke Guard -24" Composite Wheels Spoke Guard -24" Spoke Wheel 4076X00 Tire Pump Wheel Lock Extensions, 6" ( Pair) A - For Rigid Tubular Style Footrest

77 Invacare Corporation One Invacare Way Elyria, Oh USA Technical Support Customer Service Customer Service Invacare Corporation, Elyria, Ohio. All rights reserved. Trademarks are identified by the symbols and. All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted. Information is subject to change without notification. (Revised 3/2/7)