SINGLE-POLE SWITCHES SWITCHES
|
|
|
- Abel Wood
- 5 years ago
- Views:
Transcription
1 SINGLE-POLE SWITCHES SWITCHES MITEQ offers a broad line of switches covering multioctave bands from 0.2 to 18 GHz. Single-pole, single-throw through single-pole, seven-throw switches are available as standard products. We can, on special request, provide switches up to single-pole, twelve-throw and can array switches to form switch matrices to handle signal routing in complex systems. Custom switches up to 40 GHz are also available. Our switches can be screened to the salient characteristics of MIL-STD-883 and we offer a variety of connector options including GPO and SMA. Custom highpower switches capable of switching up to 10 watts are also available. Our standard products achieve switching times as low as two nanoseconds for those applications requiring the ultimate in switching speed. We are able to accommodate special video leakage needs by incorporating video filters and pulse-shaping networks as needed. GENERAL SPECIFICATIONS Power handling (full performance) dbm Power handling (no damage) dbm Video leakage for F model (RMS power)... < -50 dbm (> 2 GHz) typical Third order input intercept point dbm typical ENVIRONMENTAL CONDITIONS Operating temperature... 0 to 70 C Storage temperature to +85 C Humidity... 95% noncondensing Vibration Gs RMS, Hz per MIL-STD-810B, Method 514, Procedure 5 2
2 2 ns models SINGLE-POLE SINGLE-THROW SWITCHES S103A :1 Ref SPST 1-5 S103B :1 Ref SPST 1-5 N103A :1 Abs SPST 1-5 N103B :1 Abs SPST 1-5 S113A :1 Ref SPST 1-6 S113B :1 Ref SPST 1-6 N113A :1 Abs SPST 1-5 N113B :1 Abs SPST 1-5 S136A :1 Ref SPST S136B :1 Ref SPST 1-6 N136A :1 Abs SPST 1-5 N136B :1 Abs SPST 1-5 S147A :1 Ref SPST 1-6 S147B :1 Ref SPST 1-6 N147A :1 Abs SPST 1-5 N147B :1 Abs SPST 1-5 S138A :1 Ref SPST 1-6 S138B :1 Ref SPST 1-6 N138A :1 Abs SPST 1-5 N138B :1 Abs SPST 1-5 S128A :1 Ref SPST 1-5 S128B :1 Ref SPST 1-5 N128A :1 Abs SPST 1-5 N128B :1 Abs SPST :1 Abs SPST 5V,-12V :1 Abs Contact factory 5V,-15V. 40ns switch speed :1 Abs SPST 5V,-5V. 6ns rise/fall time :1 Abs SPST 5V,-5V. 6ns rise/fall time :1 Ref SPST 5V,-15V. 30ns switch speed :1 Abs SPST 5V,-15V. 5ns rise/fall time :1 Ref SPST 5, -15V. 2ns rise/fall time :1 Ref Contact factory ±15V. 4ns rise/fall time :1 Ref Contact factory 5V,-12V. 3ns rise/fall time :1 Ref Contact factory 5V,-15V. 4ns rise/fall time 3
3 SINGLE-POLE DOUBLE-THROW SWITCHES S203A :1 Ref SP2T 1-5 S203B :1 Ref SP2T 1-5 N203A :1 Abs SP2T 1-5 N203B :1 Abs SP2T 1-5 S213A :1 Ref SP2T 1-5 S213B :1 Ref SP2T 1-5 N213A :1 Abs SP2T 1-5 N213B :1 Abs SP2T 1-5 S236A :1 Ref SP2T S236B :1 Ref SP2T 1-5 N236A :1 Abs SP2T 1-5 N236B :1 Abs SP2T 1-5 S247A :1 Ref SP2T 1-5 S247B :1 Ref SP2T 1-5 N247A :1 Abs SP2T 1-5 N247B :1 Abs SP2T 1-5 S238A :1 Ref SP2T 1-5 S238B :1 Ref SP2T 1-5 N238A :1 Abs SP2T 1-5 N238B :1 Abs SP2T 1-5 S228A :1 Ref SP2T 1-5 S228B :1 Ref SP2T 1-5 N228A :1 Abs SP2T 1-5 N228B :1 Abs SP2T :1 Ref SP2T 50ns switch speed :1 Abs Contact factory 5V,-12V. 50ns switch speed :1 Ref Contact factory 5V,-12V. Single TTL line :1 Abs SP2T 5V,-15V. 50ns switch speed :1 Ref SP2T 5V,-12V :1 Ref SP2T 5V,-12V. 50ns switch speed :1 Ref 25 Contact factory Single 5V supply :1 Ref SP2T 5V,-12V. 50ns switch speed :1 Ref SP2T 5V,-12V. 50ns switch speed :1 Abs SP2T 5V,-12V. Single TTL line :1 Abs SP2T 5V,-15V :1 Ref SP2T 5V,-12V. 7ns rise/fall time 4
4 Binary decoded logic SINGLE-POLE THREE-THROW SWITCHES S303A :1 Ref SP3T 1-5 S303B :1 Ref SP3T 1-5 N303A :1 Abs SP3T 1-5 N303B :1 Abs SP3T 1-5 S313A :1 Ref SP3T 1-5 S313B :1 Ref SP3T 1-5 N313A :1 Abs SP3T 1-5 N313B :1 Abs SP3T 1-5 S336A :1 Ref SP3T S336B :1 Ref SP3T 1-5 N336A :1 Abs SP3T 1-5 N336B :1 Abs SP3T 1-5 S347A :1 Ref SP3T 1-5 S347B :1 Ref SP3T 1-5 N347A :1 Abs SP3T 1-5 N347B :1 Abs SP3T 1-5 S338A :1 Ref SP3T 1-5 S338B :1 Ref SP3T 1-5 N338A :1 Abs SP3T 1-5 N338B :1 Abs SP3T 1-5 S328A :1 Ref SP3T 1-5 S328B :1 Ref SP3T 1-5 N328A :1 Abs SP3T 1-5 N328B :1 Abs SP3T :1 Ref SP3T Single 5V supply :1 Ref Contact factory Single 5V supply :1 Ref SP3T 5V,-12V :1 Ref SP3T 5V,-12V. 50ns switch speed 5
5 Binary decoded logic SINGLE-POLE FOUR-THROW SWITCHES 2 8 S403A :1 Ref SP4T 1-5 S403B :1 Ref SP4T 1-5 N403A :1 Abs SP4T 1-5 N403B :1 Abs SP4T 1-5 S413A :1 Ref SP4T 1-5 S413B :1 Ref SP4T 1-5 N413A :1 Abs SP4T 1-5 N413B :1 Abs SP4T 1-5 S436A :1 Ref SP4T 1-5 S436B :1 Ref SP4T 1-5 N436A :1 Abs SP4T 1-5 N436B :1 Abs SP4T 1-5 S447A :1 Ref SP4T 1-5 S447B :1 Ref SP4T 1-5 N447A :1 Abs SP4T 1-5 N447B :1 Abs SP4T 1-5 S438A :1 Ref SP4T 1-5 S438B :1 Ref SP4T 1-5 N438A :1 Abs SP4T 1-5 N438B :1 Abs SP4T 1-5 S428A :1 Ref SP4T 1-5 S428B :1 Ref SP4T 1-5 N428A :1 Abs SP4T 1-5 N428B :1 Abs SP4T :1 Ref SP4T 5V, -15V :1 Abs 35 Contact factory Single 5V supply :1 Abs SP4T 5V,-15V :1 Abs 35 Contact factory Single 5V supply :1 Ref Contact factory Single 5V supply 6
6 Binary decoded logic SINGLE-POLE FIVE-THROW SWITCHES S503A :1 Ref SP5T 1-5 S503B :1 Ref SP5T 1-5 N503A :1 Abs SP5T 1-5 N503B :1 Abs SP5T 1-5 S513A :1 Ref SP5T 1-5 S513B :1 Ref SP5T 1-5 N513A :1 Abs SP5T 1-5 N513B :1 Abs SP5T 1-5 S536A :1 Ref SP5T S536B :1 Ref SP5T 1-5 N536A :1 Abs SP5T 1-5 N536B :1 Abs SP5T 1-5 S547A :1 Ref SP5T 1-5 S547B :1 Ref SP5T 1-5 N547A :1 Abs SP5T 1-5 N547B :1 Abs SP5T 1-5 S538A :1 Ref SP5T 1-5 S538B :1 Ref SP5T 1-5 N538A :1 Abs SP5T 1-5 N538B :1 Abs SP5T 1-5 S528A :1 Ref SP5T 1-5 S528B :1 Ref SP5T 1-5 N528A :1 Abs SP5T 1-5 N528B :1 Abs SP5T 1-5 supply operation, fast switching time, single TTL control line. Consult factory for options. 7
7 Binary decoded logic SINGLE-POLE SIX-THROW SWITCHES S603A :1 Ref SP6T 1-5 S603B :1 Ref SP6T 1-5 N603A :1 Abs SP6T 1-5 N603B :1 Abs SP6T 1-5 S613A :1 Ref SP6T 1-5 S613B :1 Ref SP6T 1-5 N613A :1 Abs SP6T 1-5 N613B :1 Abs SP6T 1-5 S636A :1 Ref SP6T S636B :1 Ref SP6T 1-5 N636A :1 Abs SP6T 1-5 N636B :1 Abs SP6T 1-5 S647A :1 Ref SP6T 1-5 S647B :1 Ref SP6T 1-5 N647A :1 Abs SP6T 1-5 N647B :1 Abs SP6T 1-5 S638A :1 Ref SP6T 1-5 S638B :1 Ref SP6T 1-5 N638A :1 Abs SP6T 1-5 N638B :1 Abs SP6T 1-5 S628A :1 Ref SP6T 1-5 S628B :1 Ref SP6T 1-5 N628A :1 Abs SP6T 1-5 N628B :1 Abs SP6T :1 Abs SP6T 5V,-5V :1 Ref 25 Contact factory Single 5V supply 8
8 Binary decoded logic SINGLE-POLE SEVEN-THROW SWITCHES S703A :1 Ref SP7T 1-5 S703B :1 Ref SP7T 1-5 N703A :1 Abs SP7T 1-5 N703B :1 Abs SP7T 1-5 S713A :1 Ref SP7T 1-5 S713B :1 Ref SP7T 1-5 N713A :1 Abs SP7T 1-5 N713B :1 Abs SP7T 1-5 S736A :1 Ref SP7T S736B :1 Ref SP7T 1-5 N736A :1 Abs SP7T 1-5 N736B :1 Abs SP7T 1-5 S747A :1 Ref SP7T 1-5 S747B :1 Ref SP7T 1-5 N747A :1 Abs SP7T 1-5 N747B :1 Abs SP7T 1-5 S738A :1 Ref SP7T 1-5 S738B :1 Ref SP7T 1-5 N738A :1 Abs SP7T 1-5 N738B :1 Abs SP7T 1-5 S728A :1 Ref SP7T 1-5 S728B :1 Ref SP7T 1-5 N728A :1 Abs SP7T 1-5 N728B :1 Abs SP7T :1 Abs SP7T V, -15V 1ns switch speed 9
9 SWITCH OUTLINE DRAWINGS SPST SP2T 0.36 [9.14] MAX [20.32] [15.25] 0.10 [2.54] 4 HOLES (2) PLACES SP3T +5 V -12 V [20.32] 1.00 [25.40] 0.38 [9.65] 0.40 [10.16] 0.80 [20.32] 0.36 [9.14] MAX [2.54] [15.24] 4 HOLES (3) PLACES SP4T E2 +5V -12V [20.32] 1.00 [25.40] [6.86] [6.86] [7.87] [20.32] 0.10 [2.54] 4 HOLES (4) PLACES +5V -12V E [6.86] (3) PLACES J3 E [20.32] 1.00 [25.40] SQUARE 0.50 [12.70] [13.97] 0.35 [8.89] 0.35 [8.89] 0.10 [2.54] (5) PLACES [33.02] 4 HOLES +12V +5V E4 J4 E2 E3 J [33.02] 1.50 [38.10] SQUARE 0.75 [19.05] SP5T SP6T [13.97] 0.35 [8.89] 0.35 [8.89] 0.10 [2.54] (6) PLACES [33.02] 4 HOLES -12V +5V E5 J5 E2 E3 J3 E4 J [33.02] 1.50 [38.10] SQUARE 0.75 [19.05] [13.97] 0.35 [8.89] 0.35 [8.89] 0.10 [2.54] (8) PLACES [33.02] 4 HOLES -12V +5V E6 J6 E2 E3 J [33.02] 1.50 [38.10] SQUARE J4 E4 E5 J [19.05] GENERAL NOTES: 1. Dimensions shown in brackets [ ] are in millimeters. 2. Unless specified, all connectors are type SMA female field replaceable. SMA male also available, see ordering options. 3. Tolerance as follows:.xx = ±0.01 [.xx = ±0.25].xxx = ±0.005 [.xxx = ±0.13] 10
10 SWITCH OUTLINE DRAWINGS (CONT.) SP7T (8) PLACES [33.02] +15 V -15V J7 E7 E6 J6 E2 E3 J3 J4 E4 E5 J [19.05] GENERAL NOTES: 1. Dimensions shown in brackets [ ] are in millimeters. 2. Unless specified, all connectors are type SMA female field replaceable. SMA male also available, see ordering options. 3. Tolerance as follows:.xx = ±0.01 [.xx = ±0.25].xxx = ±0.005 [.xxx = ±0.13] 0.10 [2.54] 4 HOLES [33.02] 1.50 [38.10] SQUARE ORDERING INFORMATION To order a standard switch with specific parameters please include the following: Model Number Specify from tables on previous pages. Impedance Control Option Current control, each throw: 15 ma typ. (insertion loss) 20 ma typ. (isolation) Blank TTL driver, inverting logic O = Isolation, I = Insertion loss D TTL driver, noninverting logic I = Isolation, O = Insertion loss N Rise/Fall Time, ns Medium: 300ns maximum M Fast: 20 ns, SP2T SP7T F Ultrafast: 3 ns maximum Available in models S113, S136, S147 and S138 only U Power Supply 5V, -12V V, -5V V, -15V S236B D F O The above illustrated switch Part Number S236B-D-F-O is based on the following parameters: 2 8 GHz Single-Pole Double-Throw Switch Isolation db OFF state Reflective Impedance control TTL, inverting logic Rise/fall time ns maximum Power supply V, -12V ORDERING INFORMATION FOR RF CONNECTORS Unless otherwise specified on the purchase order, units will be shipped with field replaceable SMA female connectors on the input and outputs. If male connectors are desired on any ports, specify on the purchase order. 11
11 PIN SWITCHES TEL: (631) FAX: (631) DATE COMPANY ADDRESS CONTACT TEL. FAX For additional technical, price and delivery information, please copy, complete and mail or fax this form to (631) , or call John Pierro at (631) SPECIFICATION PARAMETER REQUIREMENT 1 REQUIREMENT 2 REQUIREMENT 3 Frequency range (GHz) Type (i.e., SP6T) Insertion loss (db, maximum) Isolation (db, minimum) VSWR (maximum) Type (reflective/absorptive) DC power (±V) Current consumption (±V, ma) Video leakage (dbm) Switching speed (ns) Connectors Operating temperature Quantity Special requirements, such as special testing/screening, or specific operating environment may be listed below: PLEASE SEND ADDITIONAL INFORMATION ON THE FOLLOWING MITEQ PRODUCTS: Amplifiers Mixers Multipliers Frequency Sources Passive Power Components IF Signal Processing Components Integrated Assemblies SATCOM Products Davids Drive, Hauppauge, NY TEL.: (631) FAX: (631) /
DIRECTIONAL COUPLERS FEATURES APPLICATIONS DIRECTIONAL COUPLERS
DIRECTIONAL COUPLERS DIRECTIONAL COUPLERS FEATURES igh power to 1000 watts CW Frequency ranges from 20 Mz to 18 Gz Low insertion loss and VSWR igh directivity Rugged packaging Directional and bidirectional
LOW NOISE MEDIUM POWER WIDE BAND MRI BANDS CELLULAR/PCN BANDS INMARSAT BANDS
Back to Amplifier Home Page BIPOLAR AMPLIFIERS AMPLIFIERS TO 2 GHz AU SERIES AM SERIES AUP SERIES AMP SERIES LOW NOISE MEDIUM POWER WIDE BAND MRI BANDS CELLULAR/PCN BANDS INMARSAT BANDS Table Of Contents
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
Wide band isolators (Peripheral Mode) 1-3 // // 2-6 // // 2-18 // //4-12// 4-20// 6-21// 8-18
SMA/N/ K Connector options (X) Isolator Port 1 Port 2 Female Male -1 Male Female -2 Female Female -3 Male Male -4 Tolerance Table Metric (inch) (unless otherwise stated): Hole diameter +/- 0.1mm, (+/-
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
Power Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
Model C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
MITEQ AM-1185 SERIES AMPLIFIER
MITEQ AM-1185 SERIES AMPLIFIER GAIN VAR. IMPED. NOISE P1 db NOM. FREQUENCY MODEL (±db) IN/OUT FIGURE (dbm) POWER OUTLINE NUMBER (Min.) (Max.) (Max.) (Ohms) (db, Typ.) (Typ.) VOLTS (ma) NO. 1 1000 AM-1185-1000
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
Unit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
Typical Performance Data
Surface Mount Attenuator/Switch 75Ω Bi-Phase to Maximum Ratings Operating Temperature -4 C to 85 C Storage Temperature -55 C to C Control Current 3mA Permanent damage may occur if any of these limits are
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
Section 16. Short Slot Hybrids. Theory
Section Short Slot Hybrids Theory FIGURE 1 COUPLER TERMINOLOGY Coupling = Ratio A to C Balance = Ratio B to C Directivity = Ratio C to D Isolation = Ratio A to D Isolation = Coupling + Directivity PHASE
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
SPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON
INCH-POUND 4 February 2004 SUPERSEDING MIL-M-38510/116 16 April 1980 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON This specification is approved for
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In
Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In 059 PLL-SI 159 miniaturized 85 C PUL-SI Fig. 1 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 22 x 25
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
PG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
PMI MODEL No: RFE BB With Option JT Serial Numbers: PM604086
TEST REPORT ON 2.0 TO 18.0 GHz TSS OF -63dBm DYNAMIC RANGE OF -60 TO +5dB PMI MODEL No: RFE-218-70-BB With Option JT Serial Numbers: PM604086 Designed By Brent Baker Tested By Brent Baker Reported By Peter
DynaFlex series cable assemblies employ innovative designs and material technology to deliver optimized electrical and
REVISED DynaFlex_021516_final_no logos.qxp_layout 1 5/10/17 1:56 PM Page 1 See back cover to learn about R single path to optimal performance www.dynawave.com DynaFlex RF and microwave cable assemblies
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
AMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator
1A Adjustable / Fixed Low Dropout Linear Regulator Description The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in six fixed voltage, 1.2,
MMA Q5 Q / / / - /Chip Gain Flatness RL Current -1 d B T yp/m a x
New MMIC Products High Performance/Quality MMIC Based on InGaP HBT, phemt, and Linear MESFET Technologies High Linearity, Fully Matched WiMax Power Amplifiers High Power/Efficiency, Wide and Narrow Band
With KEPCO RCW. Kepco POWER SUPPLIES RCW. Power. Supplies, you re. always. in great. shape. Put them through a. real workout.
146-1871 KEPCO RCW POWER SUPPLIES With Kepco RCW Power Supplies, you re always in great Put them through a shape. real workout. These Heavy Duty RCW Power Supplies can take anything. The RCW are the latest
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
Aluminum Capacitors Power Ultra Long Life Snap-In
059 PLL-SI QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Fig.1 Component outlines 159 miniaturized 85 C PUL-SI VALUE 22 x 25 to 35 x 60 157 PUM-SI Rated capacitance range (E6/E12 series),
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
Digital Automatic. Accurate Measurement of On/Off Time for b/g WLAN/WiMAX LNAs LNA ON/OFF TIME. This article compares two
From November 2009 High Frequency Electronics Copyright 2009 Summit Technical Media, LLC Accurate Measurement of On/Off Time for 802.11 b/g WLAN/WiMAX LNAs By Ahmad H. Abdelmajid RFMD, Inc. Digital Automatic
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
Application Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
Model Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
High Power Directional Coupler
DATA SHEET High power coupler at 500 W across a wideband from 698 to 2700 MHz Low RF Insertion Loss and excellent return loss performance Outdoor unit with a wide range of coupling values from 6 to 20
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 057 PSM-SI smaller dimensions 159 PUL-SI 105 C 157 PUM-SI Fig. 1 longer life higher ripple 198 PHR-SI QUICK REFERENCE DATA DESCRIPTION VALUE
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
Features. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
PCB Relay. Contact form Terminals Coil terminals Rated voltage Model SPST-NO #250 tab terminals PCB terminals 5, 12, 24 VDC G4A-1A
PCB Relay Miniature Single-pole Relay with 80-A Surge Current and 20-A Switching Current Ideal for motor switching. Miniature, relay with high switching capacity built-in applications. Creepage distance
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
SRM1850 SRM W 18" Powered Subwoofers
1850 are Built-like-a-Tank, delivering of intense power in an ultra-high output design that can shake the room. The professional-grade, internally-braced all-wood enclosure provides tour level road-worthiness
Frequency range MHz (fixed diplexer) Diplexer 30/47 or 42/54 MHz optional. slope 6 db
AMPLIFIERS LA-1 A/B HIGH POWER GaAs-FET AMPLIFIER Features High power GaAs-FET amplifier Low distortion and low noise High gain, switchable 30 / db Electronic step attenuators for slope and loss on board
ZV/ZVY Series Low Voltage SMD Varistors
Description: The ZV Series of low voltage varistors is designed to protect sensitive electronics devices against high voltage surges in the low voltage region. They offer excellent transient energy absorption
Bi-Directional Coupler
Bi-Directional Coupler DC Pass, High Power 50Ω 30dB Coupling 200W 225 to 450 MHz The Big Deal High power handling, up to 200W High directivity, 28 db Low insertion loss, 0.15 db Product Overview Mini-Circuits
Features. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
CROSS FIELD ARRAY-2 (CFA-2) Long Throw/High Intelligibility All-Weather Loudspeaker System V100/2015
CROSS FIELD ARRAY-2 (CFA-2) Long Throw/High Intelligibility All-Weather Loudspeaker System V100/2015 The One Systems Cross Field Array-2 (CFA-2) was designed to provide very high intelligibility and acoustic
E8P. OEM Optical Kit Encoder Page 1 of 9. Description. Mechanical Drawing. Features
Description Page 1 of 9 The E8P optical incremental kit encoder is designed for high volume, low cost, mid-resolution OEM motion control applications. The E8P is small enough for a NEMA Size 11 stepper
mcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
MPP10-48 S 05 W A - P T Series Name Input Output Output Input Pin Connection Remote On/Off Trim Voltage Quantity Voltage Range Option Options Option
Medical PV Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Railway PART NUMBER STRUCTURE MPP10-48 S 05 W A - P T Name Input Output Output Input Pin Connection Remote On/Off
4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
SiCan Simple CAN Extension Charger to PacMon
SiCan Simple CAN Extension Charger to PacMon Provides and extension charger to PacMon. Drives CAN TC (Elcon) type chargers. Interfaces with the CMon, SiMon, and UMon. Programmable high and low (balance)
3-Phase Military AC-DC Power Supply 3-Phase, VrmsL-L
-4-1U 3-Phase Military AC-DC Power Supply 3-Phase, 8-265 VrmsL-L 47-8 Hz Semi-Regulated 28 V-48 V 4 W 525 W Transient Input Power Input Frequency Output Voltages Output Power Sealed Construction, Ultra
AR circuit breaker - Hydraulic magnetic,
AR circuit breaker - Hydraulic magnetic, Datasheet railway, small Features Description Small hydraulic magnetic circuit breaker for railway applications to protect electronic equipment and components against
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
DEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
PDR circuit breaker - Ground fault Datasheet
- Ground fault Datasheet protection device Features Blue housing 1-3 poles plus neutral 7-100mA Preciese, temperature independent operation Choise of time delays, terminals and actuator colours Application
Backed and fully. supported by Fills. more power. 3 Year Warranty REV120815
Solid-State Amplifiers HV TECHNOLOGIES, Inc. providing Sales and Service in North America for: HIGH POWER SOLID-STATE AMPLIFIERS Covering North America Including: United States, Canada, and Mexico Long
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
NB 50 S M / 5 - A - D
NBS single and triple-output DC/DC converters 4 Vin, 8Vout, watts FEATURES.38 Inch Profile Synchronization N + Redundancy Remote Turn On (TTL) Parallelable Operation Trim Pin How to Order: Over Temperature
or 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
FR circuit breaker - hydraulic magnetic, railway, very high current. Datasheet
FR circuit breaker - hydraulic magnetic, railway, Datasheet very high current Features Ideal for very high current applications Precise, temperature independent operation Panel mount Integrated auxiliary
FEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard
FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATIBLE COMPONENT MARKING A,
Series 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape