Typical Performance Data

Transcription

1 Surface Mount Attenuator/Switch 75Ω Bi-Phase to Maximum Ratings Operating Temperature -4 C to 85 C Storage Temperature -55 C to C Control Current 3mA Permanent damage may occur if any of these limits are exceeded. Pin Connections INPUT 4 OUTPUT 1 CONTROL 5 GROUND 2,3,6 Outline Drawing Features wideband, to excellent phase and amplitude unbalance Applications bi-phase modulator FREQUENCY () INSERTION LOSS ±2 ma MA. INPUT PWR (dbm) ±2 ma IN-OUT ISOLATION ma CASE STYLE: QQQ13 Attenuator/Switch Electrical Specifications BI-PHASE (±2 ma) Typ. AMP Phase (deg.) deviation from 18 IN CON Mid-Band Total m Range 1 db no L M U Total Total f L -f U Typ. Max. Typ. Max. compr. damage Typ. Min. Typ. Min. Typ. Min. m Range m Range - DC L = low range [f L to f L ] M = mid range [ f L to f U /2] U = upper range [f U /2 to f U ] m = [ 2 f L to f U /2] Performance specifications apply for input power up to db below stated 1 db compression. PCB Land Pattern Freq. () I. Loss at 2mA ±Control AMP 2mA Phase (deg.) Typical Performance Data Isolation (in-out) (in-con) Input R. Loss Control Current (ma) Attenuation Phase ref at 15mA Ctrl Input VSWR σ deg. deg. deg Suggested Layout, Tolerance to be within ±.2 Outline Dimensions ( inch mm ) A B C D E F G H J K L M wt grams suggested control port biasing configuration Demo Board MCL P/N: TB-34 Suggested PCB Layout (PL-43) INSERTION LOSS INSERTION LOSS FREQUENCY () ISOLATION ISOLATION IN-OUT IN-CON FREQUENCY () ATTENUATION ATTENUATION 5 electrical schematic CONTROL CURRENT (ma) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box 35166, Brooklyn, NY (718) sales@minicircuits.com REV. A M1517 WP/TD/CP 15819

2 Attenuator/Switch Typical Performance Data FREQ. INSERTION LOSS () (deg.) at 2mA Control Current AMP. UNBAL. at ± 2mA Control Current PHASE UNBAL. at ± 2mA Control Current ISOLATION at ma Control Current In-Out In-Con RETURN LOSS Input CONTROL CURRENT (ma) ATTENUATION PHASE UNBALANCE REF AT 15 ma CONTROL (deg.) 5 5 INPUT VSWR (:1) REV Page 1 of 1

3 Attenuator/Switch Typical Performance Curves Insertion Loss Insertion 2 ma Frequency () Amplitude Unbalance Amplitude ± 2mA Frequency () Phase Unbalance (deg) Return Loss Phase Unbalance (deg) Phase ± 2mA Frequency () Return Loss Input Frequency () Phase Unbalance 15 ma Control Current (ma) Phase Phase 5 Phase Isolation Attenuation VSWR ma Frequency () Attenuation Isolation In-Out Isolation In-Con Control Current (ma) Input VSWR Control Current (ma) Input Input 5 Input REV Page 1 of 1

4 Case Style Outline Dimensions QQQ QQQ13 (non-waterproof) QQQ828 (washable) PCB Land Pattern Suggested Layout, Tolerance to be within ±.2 CASE# A B C D E F G H J K L M WT, GRAM QQQ13 QQQ828.4 (.16).31 (7.87).2 (5.8).5 (1.27). (2.54). (.25). (2.54).5 (1.27).42 (.67).12 (3.5).6 (1.52). (2.54).2 (.51).55.2 Dimensions are in inches (mm). Tolerances: 2 Pl. ±.1; 3 Pl. ±.5 Notes: 1. Case material: Ceramic. 2. Termination finish: For RoHS Case Styles: For RoHS-5 Case Styles: Tin plate over Nickel plate. Tin-Lead plate. 98-QQQ Rev.: L (11/24/9) M File: 98-QQQ.doc Sheet 1 of 3 This document and its contents are the property of Mini-Circuits

5 Tape & Reel Packaging TR-F Tape Width, mm Device Cavity Pitch, mm Reel Size, Devices per Reel inches 7,2,5,, Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: Note: Please consult individual model data sheet to determine device per reel availability. 98-TR-F Rev.: B (3/15/17) M16788 File: 98-TR-F.doc Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.

6

7

8 Mini-Circuits Environmental Specifications ENV2T1 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -4 to 85 C Ambient Environment Individual Model Data Sheet Storage Temperature -55 to C Ambient Environment Individual Model Data Sheet Humidity 9 to 95% RH, 24 hours, 5 C MIL-STD-22, Method 3, Condition A, Except 5 C and end-point electrical test done within 12 hours Thermal Shock -55 to C, cycles MIL-STD-22, Method 7, Condition A-3, except + C Solder Reflow Heat Sn-Pb Eutetic Process: 225 C peak Pb-Free Process C peak J-STD-2, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability Magnification J-STD-2, 95% Coverage Vibration (High Frequency) 2g peak, -2 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-22, Method 24, Condition D Mechanical Shock 5g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-22, Method 213, Condition A Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25 C; terpene defluxer at 25 C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63 C to 7 C MIL-STD-22, Method 215 ENV2T1 Rev: B 2/25/11 M1324 File: ENV2T1.pdf This document and its contents are the property of Mini-Circuits. Page: 1