DynaFlex series cable assemblies employ innovative designs and material technology to deliver optimized electrical and
|
|
|
- Carmel Rice
- 6 years ago
- Views:
Transcription
1 REVISED DynaFlex_021516_final_no logos.qxp_layout 1 5/10/17 1:56 PM Page 1 See back cover to learn about R single path to optimal performance DynaFlex RF and microwave cable assemblies Broadband performance up to 40 GHz Low density, DynaCore dielectric technology Design options to optimize mechanical or electrical characteristics Low loss, phase stable Excellent mechanical compression strength Stainless steel connectors Rugged strain relief design DynaFlex series cable assemblies employ innovative designs and material technology to deliver optimized electrical and mechanical performance across a wide range of RF & microwave applications. DynaFlex assemblies utilize our DynaCore dielectric technology to provide enhanced mechanical resistance to crush and kinking while delivering low loss and phase stable electrical performance. DynaCore is the industry s most compression-resistant ETFE dielectric that protects against damage related to difficult routing, cable clamping and field installation. DynaFlex assemblies are designed with robust, double-walled strain relief shrink DynaCore Technology Our industry-leading dielectric core technology provides unique advantages for your component or system design. tubing at the connector-cable junction and high temperature jacketing to ensure reliable, long service life. DynaFlex assemblies are available with standard connector options for rapid availability and ease of ordering. Custom connector and jacketing options are available for specific application requirements.
2 100 Series Best All-Around Performance DynaFlex 100 Series assemblies are designed for applications requiring a combination of excellent low loss electrical performance and robust physical characteristics. DynaFlex 100 Series features our advanced, low density DynaCore ETFE dielectric with a reliable tri-shield construction. The use of two woven braids with a wrapped interlayer foil provides resistance to damage from axial torque and challenging mechanical applications. Standard Product Configurations Part Number Connector Configuration Cable Type Frequency SMSM-A5PH-XXX SMA straight plug to SMA straight plug DF GHz SRSR-A5PH-XXX SMA right angle plug to SMA right angle plug DF GHz SMSR-A5PH-XXX SMA straight plug to SMA right angle plug DF GHz NMNM-A5PH-XXX N straight plug to N straight plug DF GHz NRNR-A5PH-XXX N right angle plug to N right angle plug DF GHz NMNR-A5PH-XXX N straight plug to N right angle plug DF GHz TMTM-A5PH-XXX TNC straight plug to TNC straight plug DF GHz NMNM-A6PH-XXX N straight plug to N straight plug DF GHz SMSM-A6RH-XXX SMA straight plug to SMA straight plug DF GHz SMSM-A7RH-XXX SMA straight plug to SMA straight plug DF GHz KMKM-A7KH-XXX 2.92 mm straight plug to 2.92 mm straight plug DF GHz EMEM-A7KH-XXX 2.4 mm straight plug to 2.4 mm straight plug DF GHz NMNM-A5PH-XXX SMSM-A6RH-XXX KMKM-A7KH-XXX RoHS All assemblies listed are RoHS Compliant Part Numbering System XXXX-XX XX-XXX length: inches Example: 36 inches = 036 max operating frequency: PH = 18 GHz RH = 26 GHz KH = 40 GHz Cable codes: A5 = DF118 A6 = DF126 A7 = DF140 Connector type: SM = SMA straight plug SR = SMA right angle plug SB = SMA bulkhead jack NM = N straight plug NR = N right angle plug TM = TNC straight plug TR = TNC right angle plug KM = 2.92 mm straight plug EM = 2.4 mm straight plug General Specifications DF118 DF126 DF140 Frequency (maximum) 18 GHz 26 GHz 40 GHz Impedance 50 Ohms 50 Ohms 50 Ohms Velocity of Propagation 78% 78% 78% Operating Temperature - 45 C to +125 C -45 C to +125 C -45 C to +125 C Outer Cable Diameter (nom.) inch (7.62 mm) inch (5.28 mm) inch (3.94 mm) Minimum Bend Radius 1.50 inch (38.10 mm) 1.04 inch (26.42 mm) 0.80 inch (20.32 mm) Flexure Life (5x min. bend radius) > 10,000 > 10,000 > 10,000 Cable Weight (lbs/ft, kg/m) 0.10 lbs/ft (0.15 kg/m) 0.05 lbs/ft (0.07 kg/m) 0.03 lbs/ft (0.05 kg/m) Material and Finish Cable Jacket Fluoroplastic, type IX (per ASTM D2116) or type X (per ASTM D3159) Cable Dielectric DynaCore expanded PTFE, Type F (per ASTM D4894 & D4895) First Shield Silver plated copper (per ASTM B298) Secondary Shield High temperature, aluminum polyimide foil Third Shield Silver plated copper (per ASTM B298) Cable Center Conductor Solid, silver plated copper (per ASTM B298) Strain Relief Shrink Boots Polyolefin (per M23053) Connector Housing Passivated stainless steel (per ASTM-A-582, type 303) Connector Dielectric PTFE (per ASTM-D or polystyrene/polyethylene thermoplastic) Connector Center Contacts BeCu, gold plated (per ASTM-B-488, type 1) Contact sales for additional connector interface and configuration options.
3 DF118 Cable Assembly VSWR Phase Stability v. Flexure (+/- deg.) Connector 1 Connector 2 18 GHz 26 GHz 40 GHz Frequency DF118 DF126 DF140 Straight Straight 1.30:1 1.35:1 1.40:1 Straight Right Angle 1.35:1 Right Angle Right Angle GHz GHz Measured with 360 loop at 5x minimum bend radius Cable Assembly Insertion Loss Calculation: (Cable Loss x Length) + (Connector 1 Loss) + (Connector 2 Loss) + (Mismatch Loss) Freq Cable Loss (maximum) Connector Loss (db) (GHz) DF118 DF126 DF140 Straight Right Angle db/ft db/m db/ft db/m db/ft db/m Mismatch Loss VSWR Loss (db) 1.30: : : Maximum loss specification represents performance approximately 10% higher than typical. See Dynawave website for Insertion Loss calculator to quickly determine assembly loss at any frequency.
4 200 Series Best Electrical Performance DynaFlex 200 Series assemblies are optimized for applications where low loss or phase stability is the primary application characteristic. DynaFlex 200 Series features our advanced DynaCore ETFE dielectric with a wrapped inner foil shield that minimizes attenuation and improves phase stability with flexure. The 200 Series assemblies are recommended for use with applications that have radial torque requirements less than 15 in-lbs (1.69 Nm). NMNM-A9PH-XXX Standard Product Configurations Part Number Connector Configuration Cable Type Frequency SMSM-A9PH-XXX SMA straight plug to SMA straight plug DF GHz SRSR-A9PH-XXX SMA right angle plug to SMA right angle plug DF GHz SMSR-A9PH-XXX SMA straight plug to SMA right angle plug DF GHz NMNM-A9PH-XXX N straight plug to N straight plug DF GHz NRNR-A9PH-XXX N right angle plug to N right angle plug DF GHz NMNR-A9PH-XXX N straight plug to N right angle plug DF GHz TMTM-A9PH-XXX TNC straight plug to TNC straight plug DF GHz NMNM-B1PH-XXX N straight plug to N straight plug DF Ghz SMSM-B1RH-XXX SMA straight plug to SMA straight plug DF GHz KMKM-E9WH-XXX 2.92 mm straight plug to 2.92 mm straight plug DF GHz EMEM-E9WH-XXX 2.4 mm straight plug to 2.4 mm straight plug DF GHz SMSM-B1RH-XXX KMKM-E9WH-XXX RoHS All assemblies listed are RoHS Compliant Part Numbering System General Specifications DF218 DF226 DF232 XXXX-XX XX-XXX length: inches Example: 36 inches = 036 max operating frequency: PH = 18 GHz RH = 26 GHz WH = 32 GHz Cable codes: A9 = DF218 B1 = DF226 E9 = DF232 Connector type: SM = SMA straight plug SR = SMA right angle plug SB = SMA bulkhead jack NM = N straight plug NR = N right angle plug TM = TNC straight plug TR = TNC right angle plug KM = 2.92 mm straight plug EM = 2.4 mm straight plug Frequency (maximum) 18 GHz 26 GHz 32 GHz Impedance 50 Ohms 50 Ohms 50 Ohms Velocity of Propagation 84% 84% 84% Operating Temperature - 45 C to +125 C -45 C to +125 C -45 C to +125 C Outer Cable Diameter (nom.) inch (7.49 mm) inch (5.46 mm) inch (4.70 mm) Minimum Bend Radius 1.50 inch (38.10 mm) 1.10 inch (27.94 mm) 0.92 inch (23.37 mm) Flexure Life (5x min. bend radius) > 1,000 > 1,000 > 1,000 Cable Weight (lbs/ft, kg/m) 0.09 lbs/ft (0.13 kg/m) 0.05 lbs/ft (0.07 kg/m) 0.04 lbs/ft (0.06 kg/m) Material and Finish Cable Jacket Fluoroplastic, type IX (per ASTM D2116) or type X (per ASTM D3159) Cable Dielectric DynaCore expanded PTFE, Type F (per ASTM D4894 & D4895) First Shield Silver plated copper (per ASTM B298) Secondary Shield Silver plated copper (per ASTM B298) Cable Center Conductor Solid, silver plated copper (per ASTM B298) Strain Relief Shrink Boots Polyolefin (per M23053) Connector Housing Passivated stainless steel (per ASTM-A-582, type 303) Connector Dielectric PTFE (per ASTM-D ) Connector Center Contacts BeCu, gold plated (per ASTM-B-488, type 1) Contact sales for additional connector interface and configuration options.
5 DF118 Cable Assembly VSWR Phase Stability v. Flexure (+/- deg.) Connector 1 Connector 2 18 GHz 26 GHz 32 GHz Frequency DF218 DF226 DF232 Straight Straight 1.30:1 1.35:1 1.40:1 Straight Right Angle 1.35:1 Right Angle Right Angle GHz GHz Measured with 360 loop at 5x minimum bend radius Cable Assembly Insertion Loss Calculation: (Cable Loss x Length) + (Connector 1 Loss) + (Connector 2 Loss) + (Mismatch Loss) Freq Cable Loss (maximum) Connector Loss (db) (GHz) DF218 DF226 DF232 Straight Right db/ft db/m db/ft db/m db/ft db/m Angle Mismatch Loss VSWR Loss (db) 1.30: : : Maximum loss specification represents performance approximately 10% higher than typical. See Dynawave website for Insertion Loss calculator to quickly determine assembly loss at any frequency.
6 400 Series Best Flexure Performance DynaFlex 400 Series assemblies are designed for dynamic flexure applications requiring a balance of low loss electrical performance and highly-engineered mechanical elements that allow flexure up to 500,000 cycles. The 400 Series features our advanced DynaCore ETFE dielectric with a stranded center conductor and polyurethane jacketing to maximize flexibilty and performance. NMNM-B7PW-XXX Standard Product Configurations Part Number Connector Configuration Cable Type Frequency SMSM-B7PW-XXX SMA straight plug to SMA straight plug DF418W 18 GHz SRSR-B7PW-XXX SMA right angle plug to SMA right angle plug DF418W 18 GHz SMSR-B7PW-XXX SMA straight plug to SMA right angle plug DF418W 18 GHz NMNM-B7PW-XXX N straight plug to N straight plug DF418W 18 GHz NRNR-B7PW-XXX N right angle plug to N right angle plug DF418W 18 GHz NMNR-B7PW-XXX N straight plug to N right angle plug DF418W 18 GHz TMTM-B7PW-XXX TNC straight plug to TNC straight plug DF418W 18 GHz NMNM-B8PW-XXX N straight plug to N straight plug DF426W 18 Ghz SMSM-B8RW-XXX SMA straight plug to SMA straight plug DF426W 26 GHz SMSM-B9RW-XXX SMA straight plug to SMA straight plug DF440W 26 GHz KMKM-B9KW-XXX 2.92 mm straight plug to 2.92 mm straight plug DF440W 40 GHz EMEM-B9KW-XXX 2.4 mm straight plug to 2.4 mm straight plug DF440W 40 GHz SMSM-B8RW-XXX KMKM-B9KW-XXX RoHS All assemblies listed are RoHS Compliant Part Numbering System General Specifications DF418W DF426W DF440W XXXX-XX XX-XXX length: inches Example: 36 inches = 036 max operating frequency: PW = 18 GHz RW = 26 GHz KW = 40 GHz Cable codes: B7 = DF418W B8 = DF426W B9 = DF440W Connector type: SM = SMA straight plug SR = SMA right angle plug SB = SMA bulkhead jack NM = N straight plug NR = N right angle plug TM = TNC straight plug TR = TNC right angle plug KM = 2.92 mm straight plug EM = 2.4 mm straight plug Frequency (maximum) 18 GHz 26 GHz 40 GHz Impedance 50 Ohms 50 Ohms 50 Ohms Velocity of Propagation 78% 78% 78% Operating Temperature - 45 C to +85 C -45 C to +85 C -45 C to +85 C Outer Cable Diameter (nom) inch (8.76 mm) inch (5.97 mm) inch (4.57 mm) Minimum Bend Radius 1.72 inch (43.69 mm) 1.18 inch (29.97 mm) 0.90 inch (22.86 mm) Flexure Life (5x min. bend radius) > 500,000 > 500,000 > 500,000 Cable Weight (lbs/ft, kg/m) 0.10 lbs/ft (0.15 kg/m) 0.05 lbs/ft (0.07 kg/m) 0.03 lbs/ft (0.05 kg/m) Material and Finish Cable Jacket Polyurethane, type XII (per MIL-DTL-17) Cable Dielectric DynaCore expanded PTFE, Type F (per ASTM D4894 & D4895) First Shield Silver plated copper (per ASTM B298) Secondary Shield Conductive tape (proprietary) Third Shield Silver plated copper (per ASTM B298) Cable Center Conductor Stranded, silver plated copper (per ASTM B298) Strain Relief Shrink Boots Polyolefin (per M23053) Connector Housing Passivated stainless steel (per ASTM-A-582, type 303) Connector Dielectric PTFE (per ASTM-D or polystyrene/polyethylene thermoplastic) Connector Center Contacts BeCu, gold plated (per ASTM-B-488, type 1) Contact sales for additional connector interface and configuration options.
7 Cable Assembly VSWR Connector 1 Connector 2 18 GHz 26 GHz 40 GHz Straight Straight 1.30:1 1.35:1 1.40:1 Straight Right Angle 1.35:1 Right Angle Right Angle 1.40:1 Phase Stability v. Flexure (+/- deg.) Frequency DF418W DF426W GHz GHz Measured with 360 loop at 5x minimum bend radius Cable Assembly Insertion Loss Calculation: (Cable Loss x Length) + (Connector 1 Loss) + (Connector 2 Loss) + (Mismatch Loss) Freq Cable Loss (maximum) Connector Loss (db) (GHz) DF418W DF426W DF440W Straight Right db/ft db/m db/ft db/m db/ft db/m Angle Mismatch Loss VSWR Loss (db) 1.30: : : Maximum loss specification represents performance approximately 10% higher than typical. See Dynawave website for Insertion Loss calculator to quickly determine assembly loss at any frequency.
8 DynaFlex standard cable assemblies in custom lengths YOU REQUEST A QUOTE 24 Contact us Monday-Thursday and receive a quote within 24 hours. Contact us Friday or on a Holiday and receive your quote the next business day. WE SHIP CUSTOM within 2 WEEKS 2 Place your order by or phone, and we will ship your custom length product within 2 weeks. Quantity: up to 25 units DynaCore Technology HOMOGENEOUS, EXPANDED PTFE STRUCTURES Round geometry becomes oval in tight bends, causing low impedance sections in coaxial cables. Low impedance results in low phase shift and high VSWR. DynaCore technology produces smooth, homogeneous, low density PTFE structures with enhanced mechanical and electrical characteristics. Competitive products apply multiple layers of PTFE tapes wrapped over each other, resulting in air gaps which cause variations in density and signal reflections. Bend PTFE Tape DynaCore Radius Ovality Ovality 2x outer 2.4% 0% diameter COMPRESSION- RESISTANT ETFE CORES DynaCore has 5x more compression resistance than PTFE tape. 40 lbs/in equals the weight of the average adult stepping on an unprotected section of DynaCore with no measurable change in diameter. 80 lbs/in equals the force of an over-tightened cable clamp, producing only a 1% change in the core diameter. Compression PTFE Tape DynaCore Force Diameter Diameter Change Change (78% VP core) (78% VP core) 40 lbs/in 3% 0% 80 lbs/in 8% 1% Advantages for Your Design Dynawave 135 Ward Hill Avenue Haverhill, MA Telephone: (978) Fax: (978) DF
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
PHASE MASTER NOW IN 4 SIZES
NOW IN 4 SIZES PHASE MASTER Phase Stable ASSEMBLIES Are you a design or test engineer looking for cable assemblies that offer an unmatched combination of phase stability, low loss, and value? Then take
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
FEATURES. ~ Compression resistant low loss, low density dielectric. ~ Quadraform shielding. ~ Highly reliable soldered connections
TRUE BLUE Low Loss cable assemblies The Answer: An unmatched combination of low loss, durability, and value. The Question: What does Storm s True Blue line of cable assemblies provide? For more than 30
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
LMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
Tender No. : Ref. No. : LSGS-13-CX User / Customer : Page No. : 1 of 9. Specification. For
Tender No. : Ref. No. : LSGS-13-CX0022-05 User / Customer : Page No. : 1 of 9 Tender Title : Bidder : LS Cable & System Ltd. Document Title : Specification For RG Cable
PRODUCT NAME ORDER # PAGE # ANTENNAS
PRODUCT NAME ORDER # PAGE # ANTENNAS 890-960 Yagi Antenna UBR-Y9000 w/ lead 0580 450 Mhz Yagi Antenna UBR-Y4000 w/ lead 05803 806-960 & 70-990 MHz Dual Band Omni Antenna 09835 3 806-960 & 70-500 Yagi Multiband
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
75 OHM COAXIAL CABLE (RG6)
RG6 CABLE (RG6) Drop Cable RG6 UL listed as type CMG for indoor cables. RG-6. 18 AWG copper covered steel with nominal diameter of 0.040 inch (1.02mm). Gas injected foam polyolefin insulation. Nominal
SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
N Male Connector Clamp/Solder Attachment for PE-C600, inch, LMR-600
N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
Detailed Specifications & Technical Data
Description: 20 AWG stranded (7x28).038" tinned copper conductors, polyethylene insulation, Beldfoil (100% coverage) plus a tinned copper braid shield (55% coverage), sunlight-resistant PVC jacket. Physical
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
MaxFlite high-performance 100 Base-T Ethernet cables
MaxFlite high-performance 100 Base-T Ethernet cables MaxFlite data cables are high-performance, highspeed 100 Base-T Ethernet cables designed for use in aircraft IFE (In-Flight Entertainment) systems.
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
4. SHIELDS. 4.1 Power Cable. 4.2 Electronic Cable Conductor Shield (Strand Shield) Outer Shield (Insulation Shield) 60
4. SHIELDS 4.1 Power Cable 4.1.1 Conductor Shield (Strand Shield) 60 4.1.2 Outer Shield (Insulation Shield) 60 4.2 Electronic Cable 4.2.1 Foil Shield 62 4.2.2 Copper Braid Shield 63 4.2.3 Spiral (Serve)
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
Cheminax RF Coaxial Cables and RF Connectors
Cheminax RF Coaxial Cables and RF Connectors QUICK REFERENCE GUIDE Convenient Lightweight, small diameter Extended temperature range High Performance High flexibility Low capacitance Low attenuation HIGHER
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
Outlets terminate all shielded and shielded cable constructions AWG ( mm) size conductors.
MAX 5e Shielded Modules The shielded MAX module is the cornerstone of our category 5e screened cabling systems. This product not only meets all TIA/EIA component specifications, but also exceeds ISO/IEC
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
SHIELD-FLEX EMI / RFI Shielded Conduit
Type SLA SHIELD-FLEX EMI / RFI Shielded Conduit Type EMS EMCS Type z Wire without interference. Shielded conduit provides exceptional shielding effectiveness from electromagnetic and radio frequency interference
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816 APPLICATION The cables are designed for use as connection between central fices. The cables are suitable for installation
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
CABLED SINGLE CONDUCTORS
CABLED SINGLE CONDUCTORS NQ SERIES Single uctors Mil Spec, U.L. AWM Recognized Style 2464 and CSA Certified AWM II A/B GRAY PVC JACKET National Wire & Cable Corporation manufactures a complete line of
Section 3. Rotary Joints. Introduction
Section Rotary Joints Introduction For more than forty years, MDL has produced waveguide rotary joints and is one of the major suppliers in both domestic and overseas markets. Many of the larger military
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Industrial, Heavy Insulated Mono-Tape. and Duo-Tape
Industrial, Heavy Insulated Mono-Tape and Duo-Tape Description: HTS/Amptek AWD and AWM Heating Tapes are Single and Double Duo-Tapes designed for use in high temperature applications. AWD and AWM Heating
K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Technical data sheet LÜTZE SUPERFLEX PLUS M (C) PUR SERVO 0.6/1 kv Supply line for Bosch Rexroth and other systems For highest requirements
PVC servo cables C-track compatible shielded Subject to technical modification 111270 Identification Type SU+M(C)P SE(4G1,0+2 (2 0,75))UL 1KV OR INK Description* INK 0653 Use/Application/Properties Application
The SPIRA Advantage in Honeycomb Filters
The SPIRA Advantage in Honeycomb Filters s family of exceptional honeycomb filters includes our NEW Shielded Fan Filter, as well as our popular -Cell and Brass-Cell Shielded Air Vent Filters. All honeycomb
SINGLE-POLE SWITCHES SWITCHES
SINGLE-POLE SWITCHES SWITCHES MITEQ offers a broad line of switches covering multioctave bands from 0.2 to 18 GHz. Single-pole, single-throw through single-pole, seven-throw switches are available as standard
ET-PWR-END-KIT Installation Instructions (part #JSR00)
(part #JSR00) Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety
Coaxial SMA MaleTerminations
Coaxial SMA MaleTerminations _ MECHANICAL SPECIFICATIONS Stainless Steel, Passivated.. high power Coaxial SMA Male terminations product selection chart P/N Power Avg. Peak Power Length Width CSM-1 1 W
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
U/FTP vs F/UTP CAT6A LAN Cables June 2016
U/FTP vs F/UTP CAT6A LAN Cables June 2016 Preface Shielded cabling systems are strongly recommended for category 6A (Class EA) installations, but the user still has to choose between two optional shielding
V (For 120, 208, 277, 600 V, please call.) Output: 37 W/ft 2 and 50W/ft 2 Cold lead:
Snow Melting Mats Data Sheet GENERAL PRODUCT INFORMATION ProLine snow melting mats feature pre-spaced heat cable (3 and 4-inch spacing) in mats that can be rolled out for quick, easy installation. To make
High Power Directional Coupler
DATA SHEET High power coupler at 500 W across a wideband from 698 to 2700 MHz Low RF Insertion Loss and excellent return loss performance Outdoor unit with a wide range of coupling values from 6 to 20
Coaxial Attenuators Low, medium and high power
Coaxial Attenuators Low, medium and high power Product description 4 Low power attenuators, up to 2 Watts BNC, 50 and 75 Ω 5 N 50 and 75 Ω 6 PC2.4 7 PC7 7 QMA 7 SK 8 SMA 8 SMPX-U 10 TNC 10 Medium power
UNSHIELDED MULTI CONDUCTOR
PLTC 300 VOLT PVC Insulation 105 C, 300 Volts UNSHIELDED MULTI CONDUCTOR For use as instrumentation cable inside or outside in control applications. Suitable for installation in trays, troughs, channels,
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
6000 Series Ethernet Buccaneer
Thermo-plastic version Patch Cord Flex Connector - Pur Jacket Cable PXP6037 Mates with PXP6033TP type panel mounting Overmoulded patchcords with IP rated connector Supplied with shielded RJ45 plug Single
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
SHIELD-FLEX EMI / RFI Shielded Conduit
Type SLA SHIELD-FLEX EMI / RFI Shielded Conduit Type EMS Type EMCS z Wire without interference. Shielded conduit provides exceptional shielding effectiveness from electromagnetic and radio frequency interference
Product Descriptions
Product Descriptions Catalog Number Foil Standard Construction - 60% Braid (90% Braid also available) lbs/kft kg/km lbs/kft kg/km F1160BV tape, 60% braid, PVC 59 88 69 103 F1160BVV tape, 60% braid, PVC,
Standard hook-up wires and cables for Electronics Filotex
Standard hook-up wires and cables for Electronics Filotex . Content Guideline of wires and cables... 4 Part 1 - Standard coaxial cables... 7 KX & RG standard coaxial cables... 9 Data bus cable M17/176-00002...
TubeTrace Tubing Bundles
for Custom CEMS and Analytical Umbilicals English Units Receiving, Storing and Handling... 1. Inspect materials for damage incurred during shipping. Report damages to carrier for settlement. 2. Identify
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
Identification Type SU+M(C)P SE(4G1,5+(2 0,75)+(2 AWG22))UL 1KV OR. Part-No
PUR servo cables C-track compatible shielded Subject to technical modification 111600 Identification Type SU+M(C)P SE(4G1,5+(2 0,75)+(2 AWG22))UL 1KV OR Use/Application/Properties Application Combined
Monolithic Amplifiers 50Ω, Broadband, DC to 8 GHz
Surface Mount Monolithic Amplifiers 50Ω, Broadband, DC to 8 GHz Features InGaP HBT microwave amplifiers miniature SOT-89 package frequency range, DC to 8 GHz, usable to 10 GHz up to 18.2 dbm typ. output
800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
Data sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification multi-port Cat.5 plug to be assembled in the field 100 MBit suitable according to IEEE
3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
(MDR) Assembly Supports LVDS Channel Link signaling 20 shielded pairs (100 ohm) +4 drains for high bandwidth applications High density 50 position MDR with rugged ribbon type contact 3 Unshielded Twisted
CABLED TWISTED PAIRS CONDUCTORS
CABLED TWISTED PAIRS CONDUCTORS NQP SERIES Twisted Pair uctors Mil Spec, U.L. AWM Recognized Style 2464 and CSA Certified AWM II A/B GRAY PVC JACKET National Wire & Cable Corporation manufactures a complete
Technical data sheet LÜTZE SUPERFLEX PLUS (C) PUR FEEDBACK Encoder cables for Siemens and other systems For highest requirements in drive technology
PUR feedback cables C-track compatible Subject to technical modification 111456 Identification Type SU+(C)P SE(4 0,5+4 2 0,38)UL 30V GN SIEMENS designation* 1BD21 Use/Application/Characteristics Application
Esoteric. MEXCEL Cable
Esoteric MEXCEL Cable MEXCEL What is MEXCEL? MEXCEL is the fine conductor technology incorporating "MEDIS" electro-coating insulation. (MEDIS: Mitsubishi Electro-Deposition Insulating System). MEDIS is
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
OFFSHORE WIND FEASIBILITY STUDY APPENDICES Appendix C.2 Subsea Cable Data Sheets
OFFSHORE WIND FEASIBILITY STUDY APPENDICES 10-7 10.3.2 Appendix C.2 Subsea Cable Data Sheets Design data for TFVA 36 kv 3x1x240 mm 2 KQ Metallic Laying up Inner sheath Bedding Armor Diameter of conductor
3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits
3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits With High-K Stress Relief For 3-Conductor Type G (Ground Wire), Copper Tape Shield, Armored Cables 7600-S-3G Series Instructions IEEE Std.
High Voltage Joints and Terminations up to 72,5 kv 145 kv
High Voltage Joints and Terminations up to 72,5 kv 145 kv 3M Cold Shrink Termination Kits QT-III and Joint Kits are designed to provide high reliability and save you time and money. They install quickly
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
Connection 1 Connection 2 ft m in mm psi bar in mm
RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability, and safe performance at an economical price.. Constructed with four spiral layers of high tensile
Quick Splice II 5451R. 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet. 1. Product Description. 2. Applications
Quick Splice II 5451R (CN) Cable (JCN) Cable Accessory Splice Jacket 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet 1. Product Description The 3M 5451R Quick Splice II is a 25/28 kv class
Cannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
FTG10OM1-0,6/1KV. 50 N/mm 2 of copper section max for fixed layings
HEPR insulated flexible with braided shield of red copper wires and plastic sheath of halogen-free flame retardant and without emission of corrosive gases. The keeps the electrical characteristics for
This chapter gives details of the design, development, and characterization of the
CHAPTER 5 Electromagnet and its Power Supply This chapter gives details of the design, development, and characterization of the electromagnets used to produce desired magnetic field to confine the plasma,
Data sheet CFBUS.PVC PVC - e-chain - Bus cable for medium load requirements (class 4.3.2): shielded, oil-resistant as well as flame-retardant.
Overview Bus system Profibus CAN-Bus / Feldbus CC-Link Part. No..001.021 &.022.035 Example drawing Bus system Part. No. Ethernet (CAT5 / CAT5e / GigE / PoE).040,.045 &.049 Ethernet (CAT6 A / PoE).050 FireWire
Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
Flame Resistance, LOI 95 >
Fluoropolymers 100 When Your Application Requires 100% Reliability. NWI fluoropolymer cables offer these outstanding performance characteristics: Resistance to flame, acids, solvents, chemicals and more
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC
mcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
Accessories. Introduction. Cable Hangers LINE PRODUCTS TRANSMISSION
Accessories Introduction While a number of cable related accessories are available on the market, RFS components are of the highest quality and are designed to provide years of trouble-free service. Together
Power & Control Cable IEC
(2-, 3-, 4,- and 5-cores) U 0 Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14). Recoended
Data sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
SOFT-SHIELD 5000 Series Conductive Jacket over Foam EMI Gaskets
Seals Conductive elastomers Knitted wire mesh Conductive coatings, sealants, adhesives Cable shielding products EMI/ESD shielding laminates Shielded vents and windows Commercial and military EMI testing