N Male Connector Clamp/Solder Attachment for PE-C600, inch, LMR-600

Size: px

Start display at page:

Download "N Male Connector Clamp/Solder Attachment for PE-C600, inch, LMR-600"

Alberta McLaughlin
5 years ago
Views:

1 N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Configuration N Male Connector MIL-STD Ohms Features Silver Plated Contact Applications General Purpose Test Custom Cable Assemblies Straight Body Geometry PE-C600, 0600 inch, LMR-600 Interface Type Clamp/Solder Attachment Contact plating according to QQ-S-365 Description Pasternack s type N male connector with clamp/solder attachment for PE-C600, 0600 inch and LMR-600 is part of our full line of RF components available for same-day shipping Our type N male connector datasheet specifications and drawing with dimensions are shown below in this PDF Pasternack s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly configuration, Pasternack has the right connector for the job Pasternack can also expertly build your custom cable assemblies for you and ship same-day Mechanical Specifications Size Length 193 in [4902 mm] Width/Dia 08 in [2032 mm] Weight 0162 lbs [7348 g] Material Specifications Contact Description Material Plating Silver QQ-S-365 Insulation PTFE Body Brass Nickel QQ-N-290 Coupling Nut Brass Nickel QQ-N-290 Click the following link (or enter part number in SEARCH on website) to obtain additional part information including price, inventory and certifications: N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 REV 11 1

2 N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Environmental Specifications Temperature Operating Range -65 to +165 deg C Compliance Certifications (see product page for current document) Plotted and Other Data Notes: N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 from Pasternack Enterprises has same day shipment for domestic and International orders Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry Click the following link (or enter part number in SEARCH on website) to obtain additional part information including price, inventory and certifications: N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 URL: REV 11 2

3 CAD Drawing N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 ASSEMBLY PROCEDURES DWG TITLE NOTES: 1 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL 2 ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME 3 DIMENSIONS ARE IN INCHES [mm] 4 FITS MIL-C-17 AND EQUIVALENT CABLES FSCM NO CAD FILE SCALE N/A SIZE A XXXX REV 11 3

4 N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Configuration N Male Connector MIL-STD Ohms Features Silver Plated Contact Applications General Purpose Test Custom Cable Assemblies Straight Body Geometry PE-C600, 0600 inch, LMR-600 Interface Type Clamp/Solder Attachment Contact plating according to QQ-S-365 Description Pasternack s type N male connector with clamp/solder attachment for PE-C600, 0600 inch and LMR-600 is part of our full line of RF components available for same-day shipping Our type N male connector datasheet specifications and drawing with dimensions are shown below in this PDF Pasternack s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly configuration, Pasternack has the right connector for the job Pasternack can also expertly build your custom cable assemblies for you and ship same-day Mechanical Specifications Size Length 193 in [4902 mm] Width/Dia 08 in [2032 mm] Weight 0162 lbs [7348 g] Material Specifications Contact Description Material Plating Silver QQ-S-365 Insulation PTFE Body Brass Nickel QQ-N-290 Coupling Nut Brass Nickel QQ-N-290 Click the following link (or enter part number in SEARCH on website) to obtain additional part information including price, inventory and certifications: N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 REV 11 1

5 N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Environmental Specifications Temperature Operating Range -65 to +165 deg C Compliance Certifications (see product page for current document) Plotted and Other Data Notes: N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 from Pasternack Enterprises has same day shipment for domestic and International orders Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry Click the following link (or enter part number in SEARCH on website) to obtain additional part information including price, inventory and certifications: N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 URL: REV 11 2

6 CAD Drawing N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 ASSEMBLY PROCEDURES DWG TITLE NOTES: 1 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL 2 ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME 3 DIMENSIONS ARE IN INCHES [mm] 4 FITS MIL-C-17 AND EQUIVALENT CABLES FSCM NO CAD FILE SCALE N/A SIZE A XXXX REV 11 3

LMR-600 TIMES MICROWAVE SYSTEMS LMR -600 Flexible Low Loss Communications Coax Ideal for Jumper Assemblies in Wireless Communications Systems Short Antenna Feeder runs Any application (eg WLL, GPS,

7 LMR-600 TIMES MICROWAVE SYSTEMS LMR -600 Flexible Low Loss Communications Coax Ideal for Jumper Assemblies in Wireless Communications Systems Short Antenna Feeder runs Any application (eg WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable LMR standard is a UV Resistant Polyethylene jacketed cable designed for 20-year service outdoor use The bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables LMR - DB is identical to standard LMR plus has the advantage of being watertight The addition of waterproofing compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future LMR - FR is a non-halogen (non-toxic), low smoke, fire retardant cable designed for in-building runs that can be routed anywhere except air handling plenums LMR-FR is UL/NEC & CSA rated CMR and FT4 respectively, meets FAA FAR25 requirements and is MSHA-P for mining applications LMR - FR-PVC is a general-purpose indoor cable and has a UL/NEC & CSA rating of CMR and FT4 respectively It is less expensive than LMR-FR, however it emits toxic fumes (HCL) and greater smoke density when burned LMR - PVC is designed for low loss general-purpose applications and is somewhat more flexible than the standard polyethylene jacketed LMR LMR - PVC-W is a white-jacketed version of LMR- PVC for marine and other applications where color compatibility is desired Flexibility and bendability are hallmarks of the LMR- 600 cable design The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance Low Loss is another hallmark feature of LMR (800) TMS-COAX wwwtimesmicrowavecom Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables RF Shielding is 50 db greater than typical single shielded coax (40 db) The multi-ply bonded foil outer conductor is rated conservatively at > 90 db (ie >180 db between two adjacent cables) Weatherability: LMR-600 cables designed for outdoor exposure incorporate the best materials for UV resistance and have life expectancy in excess of 20 years Connectors: A wide variety of connectors are available for LMR-600 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins Most LMR connectors employ crimp outer attachment using standard hex crimp sizes Cable Assemblies: All LMR-600 cable types are available as pre-terminated cable assemblies Refer to the section on FlexTech for further details Part Description Stock Part Number Application Jacket Color Code LMR-600 Outdoor PE Black LMR-600-DB Outdoor/Watertight PE Black LMR-600-FR Indoor/Outdoor Riser CMR FRPE Black LMR-600-FR-PVC Indoor/Outdoor Riser CMR FRPVC Black LMR-600-PVC General Purpose PVC Black LMR-600-PVC-W General Purpose PVC White Construction Specifications Description Material In (mm) Inner Conductor Solid BCCAl 0176 (447) Dielectric Foam PE 0455 (1156) Outer Conductor Aluminum Tape 0461 (1171) Overall Braid Tinned Copper 0490 (1245) Jacket (see table above) 0590 (1499)

8 Mechanical Specifications Performance Property Units US (metric) Bend Radius: installation in (mm) 150 (381) Bend Radius: repeated in (mm) 60 (1524) Bending Moment ft-lb (N-m) 275 (373) Weight lb/ft (kg/m) 0131 (020) Tensile Strength lb (kg) 350 (1589) Flat Plate Crush lb/in (kg/mm) 60 (107) Environmental Specifications 0 Performance Property F Installation Temperature Range -40/ /+85 Storage Temperature Range -94/ /+85 Operating Temperature Range -40/ /+85 o C TIMES MICROWAVE SYSTEMS Electrical Specifications Performance Property Units US (metric) Velocity of Propagation % 87 Dielectric Constant NA 132 Time Delay ns/ft (ns/m) 117 (383) Impedance ohms 50 Capacitance pf/ft (pf/m) 234 (766) Inductance uh/ft (uh/m) 0058 (019) Shielding Effectiveness db >90 DC Resistance Inner Conductor ohms/1000ft (/km) 053 (17) Outer Conductor ohms/1000ft (/km) 12 (39) Voltage Withstand Volts DC 4000 Jacket Spark Volts RMS 8000 Peak Power kw 40 LMR-600 Attenuation vs Frequency (typical) 100 Attenuation (db per 100 feet) ,000 10,000 Frequency (MHz) Frequency (MHz) Attenuation db/100 ft Attenuation db/100 m Avg Power kw Calculate Attenuation = ( ) FMHz + ( ) FMHz (interactive calculator available at Attenuation: VSWR=10; Ambient = +25 C (77 F) Power: VSWR=10; Ambient = +40 C; Inner Conductor = 100 C (212 F); Sea Level; dry air; atmospheric pressure; no solar loading (800) TMS-COAX wwwtimesmicrowavecom 29

LMR-600 TIMES MICROWAVE SYSTEMS LMR -600 Flexible Low Loss Communications Coax TC-600-NMH-75-50 3190-1610 TC-600-NMH-X 3190-2628 TC-600-TM-X 3190-2530 EZ-600-TM-X 3190-2531 EZ-600-716MH 3190-503

EZ-600-NMH-RA-X 3190-2639 EZ-600-TF-RP 3190-796 TC-600-716MC 3190-502 TC-600-716FC 3190-375 EZ-600-UM 3190-615 TC-600-716MRA 3190-395 TC-600-UMC 3190-213 EZ-600-716F 3190-2447 Connectors Inner Outer

3190-1373 <125:1 (25) NA Spring Finger Clamp S/S 23 (58) 260 (660) 0873 (3960) 7-16 DIN Female Straight Jack TC-600-716FC 3190-375 <125:1 (25) NA Solder Clamp S/S 11 (28) 100 (254) 0249 (1129) 7-16

(330) 0347 (1574) Right Angle TC-600-716M-RA 3190-395 <135:1 (25) Hex Solder Crimp S/S 14 (36) 140 (356) 0354 (1608) 7/16 Male Right Angle EZ-600-716M-RA-X 3190-2546 <135:1 (6) Hex Spring Finger

9 LMR-600 TIMES MICROWAVE SYSTEMS LMR -600 Flexible Low Loss Communications Coax TC-600-NMH TC-600-NMH-X TC-600-TM-X EZ-600-TM-X EZ MH EZ-600-NMH-X TC-600-NMC EZ-600-NMC-2-D EZ-600-NF EZ-600-NF-BH TC-600-NF-BH TC-600-NFC-BH TC-600-NMC-RA EZ-600-TM-RP EZ-600-NMH-RA-X EZ-600-TF-RP TC MC TC FC EZ-600-UM TC MRA TC-600-UMC EZ F Connectors Inner Outer Finish* Part Stock VSWR** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) 7/8 EIA Flange EZ EIA <125:1 (25) NA Spring Finger Clamp S/S 23 (58) 260 (660) 0873 (3960) 7-16 DIN Female Straight Jack TC FC <125:1 (25) NA Solder Clamp S/S 11 (28) 100 (254) 0249 (1129) 7-16 DIN Male Straight Plug EZ MH <125:1 (25) Hex Spring Finger Crimp S/S 20 (51) 130 (330) 0254 (1152) Straight Plug TC MC <125:1 (25) Hex Solder Clamp S/S 20 (51) 130 (330) 0347 (1574) Right Angle TC M-RA <135:1 (25) Hex Solder Crimp S/S 14 (36) 140 (356) 0354 (1608) 7/16 Male Right Angle EZ M-RA-X <135:1 (6) Hex Spring Finger Crimp A/G 16 (40) 138 (350) 0462 (2100) Straight Jack EZ F <125:1 (6) Hex Spring Finger Crimp A/G 18 (45) 132 (336) 0158 (717) HN Male Straight Plug TC-600-HNM <125:1 (<1) Knurl Solder Clamp S/g 23 (592) 088 (224) 025 (113) LC Male Straight Plug TC-600-LCM <125:1 (<1) Hex Solder Clamp N/S 31 (780) 162 (411) 120 (544) N Female Straight Jack EZ-600-NF <125:1 (25) NA Spring Finger Crimp S/G 23 (59) 087 (221) 0150 (680) Bulkhead Jack EZ-600-NF-BH <125:1 (25) NA Spring Finger Crimp S/G 24 (61) 088 (224) 0195 (885) Bulkhead Jack TC-600-NF-BH <125:1 (25) NA Solder Crimp S/G 24 (61) 088 (224) 0195 (885) Bulkhead Jack TC-600-NFC-BH <125:1 (25) NA Solder Clamp S/G 22 (56) 094 (239) 0214 (971) N Male Straight Plug EZ-600-NMK <125:1 (25) Knurl Spring Finger Crimp S/G 21 (53) 092 (234) 0164 (744) Straight Plug EZ-600-NMC-2-D <125:1 (6) Hex/Knurl Spring Finger Clamp A/G 21 (53) 092 (234) 0202 (916) Straight Plug TC-600-NMC <125:1 (25) Hex Solder Clamp S/G 21 (53) 092 (234) 0208 (934) Right Angle TC-600-NMC-RA <135:1 (2) Hex Solder Clamp S?G 22 (566) 129 (328) 0270 (1226) Straight Plug EZ-600-NMH-X <125:1 (8) Hex/Knurl Spring Finger Crimp A/G 21 (53) 092 (234) 0164 (744) Straight Plug TC-600-NMH-X <125:1 (8) Hex/Knurl Spring Finger Crimp A/G 21 (53) 092 (234) 0166 (753) Right Angle EZ-600-NMH-RA-X <135:1 (6) Hex Spring Finger Crimp A/G 20 (50) 142 (360) 0224 ( 1017) Right Angle TC-600-NMH-RA-D <135:1 (6) Hex Solder Crimp A/G 18 (465) 162 (412) 0185 (843) Straight Plug TC-600-NMH <135:1 (6) Hex Solder Crimp N/G 21 (528) 091 (231) 0130 (590) QDS Male Straight Plug TC-600-QDSM <125:1 (<1) Knurl Solder Clamp A/G 22 (556) 100 (254) 025 (113) Right Angle TC-600-QDSM-RA <125:1 (<1) Knurl Solder Clamp A/G 24 (615) 188 (478) 035 (159) TNC Male Straight Plug TC-600-TM-X <125:1 (6) Hex/Knurl Solder Crimp A/G 23 (576) 075 (190) 0100 (456) Straight Plug EZ-600-TM-X <125:1 (6) Hex/Knurl Spring Finger Crimp A/G 23 ( (190) 0100 (456) Reverse Polarity EZ-600-TM-RP <125:1 (25) Knurl Spring Finger Crimp A/G 22 (56) 087 (220) 0112 (508) TNC Female Reverse Polarity EZ-600-TF-RP <125:1 (25) NA Spring Finger Crimp A/G 23 (58) 087 (220) 0100 (454) UHF Male Straight Plug EZ-600-UM <125:1 (25) Knurl Spring Finger Crimp S/G 17 (43) 088 (224) 0164 (744) Straight Plug TC-600-UMC <125:1 (25) Knurl Solder Clamp S/G 17 (43) 088 (224) 0198 (898) 30 (800) TMS-COAX wwwtimesmicrowavecom

EZ-600-78EIA 3190-1373 TC-600-HNM 3190-1429 EZ-600-NMK 3190-669 TC-600-QDSM 3190-846 TC-600-QDSM-RA 3190-847 TIMES MICROWAVE SYSTEMS TC-600-LCM 3190-1406 EZ-600-716M-RA-X 3190-2546 LMR-600 HX-4

Stock Type Number Code Description Crimp Tool HX-4 3190-200 Crimp Handle Crimp Dies Y1720 3190-203 610" Hex Dies Crimp Rings CR-600 3190-831 Crimp Rings for TC/EZ-600 connectors (pkg of 10) Strip

center conductor rough edges Midspan Strip Tool GST-600A 3190-1051 For ground strap attachment Wrench WR-600 3190-1435 15/16" Box Wrench (2 required for EZ-600-NMC-2) Cutting Tool CCT-01 3190-1544

3190-1602 Tool kit for LMR crimp/clamp connectors (includes CCT-01, CST-600, HX-4, Y1720, Tool Pouch) SH-U600T HG-600T CB-600T CS-A600T, CS-60120T, CS-60170T SC-600T Hardware Accessories Hanger

CS-A600T CS-A600T Cable to Antenna Junction (each) Cold Shrink CS-60120T CS-60120T LMR-600 to -1200 Junction (each) Cold Shrink CS-60170T CS-60170T LMR-600 to -1700 Junction (each) Hanger Blocks

10 EZ EIA TC-600-HNM EZ-600-NMK TC-600-QDSM TC-600-QDSM-RA TIMES MICROWAVE SYSTEMS TC-600-LCM EZ M-RA-X LMR-600 HX GST-600A CCT Y CST WR Install Tools CR DBT-U RB RB-CST TK-600EZ Part Stock Type Number Code Description Crimp Tool HX Crimp Handle Crimp Dies Y " Hex Dies Crimp Rings CR Crimp Rings for TC/EZ-600 connectors (pkg of 10) Strip Tool CST Combination prep tool for LMR-600 crimp and clamp style connectors Replacement Blades RB Replacement Blades for Strip Tools Deburr Tool DBT-U Removes center conductor rough edges Midspan Strip Tool GST-600A For ground strap attachment Wrench WR /16" Box Wrench (2 required for EZ-600-NMC-2) Cutting Tool CCT Cable end flush cut tool Replacement Blade RB Replacement blade for cutting tool Replacement Blade RB-CST Replacement blade kit for all CST strip tools Tool Kit TK-600EZ Tool kit for LMR crimp/clamp connectors (includes CCT-01, CST-600, HX-4, Y1720, Tool Pouch) SH-U600T HG-600T CB-600T CS-A600T, CS-60120T, CS-60170T SC-600T Hardware Accessories Hanger Support Hardware Part Stock Type Number Code Description GK-S600TT Ground Kit GK-S600TT GK-S600TT Standard Grounding Kit (each) Hoisting Grip HG-600T HG-600T Split/Laced Type (each) Cold Shrink CS-A600T CS-A600T Cable to Antenna Junction (each) Cold Shrink CS-60120T CS-60120T LMR-600 to Junction (each) Cold Shrink CS-60170T CS-60170T LMR-600 to Junction (each) Hanger Blocks CB-600T CB-600T Dual Cable Support Block (kit of 10) Standard Entry Port Cushion SC-600T-3 SC-600T-3 Three cables (each) Snap-In Hangers SH-U600T SH-U600T Snap-In Hangers (Kit of 10) Hanger Block Supporting Hardware Complete Range of Supporting Hardware & Adapters Available (800) TMS-COAX wwwtimesmicrowavecom 31

LMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS

LMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless