CABLE MANAGEMENT. Call Connectronics (888) / / OUR RESOURCES ARE YOUR SOLUTION. Stackable Snap-In Hanger Kits
|
|
- Amberly McBride
- 5 years ago
- Views:
Transcription
1
2 Universal Snap-In Hangers CABLE MANAGEMENT Stackable Snap-In Hanger Kits for 1/2 cable and LMR-600, 10-pack for 5/8 cable, 10-pack for 7/8 cable, 10-pack for EW52 Waveguide, 10-pack for EW63 Waveguide, 10 pack for EW77 Waveguide, 10 pack for EW90 Waveguide, 10 pack Standard/Butterfly Hanger Kit - Hardware not included for LMR-400 cable, 10-pack for 1/2 cable and LMR-600, 10-pack for 5/8 cable, 10-pack for 7/8 cable, 10-pack for EW52 Waveguide, 10-pack for EW63 Waveguide, 10-pack Angle Adapter, 3/8 tapped hole for standard or clip-on hangers, 10-pack, includes hardwarere Angle Adapter for Snap-in Hangers, 10-pack (two 3/4 holes for two snap-in hangers) Universal Angle Adapter with insert to convert 3/4 snap in hole to 3/8 tapped hole for standard or clip-on hangers, 10-pack includes hardware Spare Hardware Kit for Hangers, Stainless Steel, pack, 3/8 dia. x 3/4 long bolt, nuts and lockwashers Round Tower Standoff Adapter, 10-pack for 2 to 3 diameter, with 3/8 tapped hole for standard or clip-on hangers with round member adapter clamp without round member adapter clamp order seperately below ( x) Round Tower Snap-in Standoff Adapter, 10-pack for 2 to 3 diameter, with 3/4 Hole for snap-in hangers Round Tower Snap-in Standoff Adapter with 3/4 Hole for snap-in hangers, 10-pack, (order round member adapter x separtately below) Round Member Adapter Clamp, 10-pack for 1 to 2 diameter pole for 2 to 3 diameter pole for 3 to 4 diameter pole for 4 to 5 diameter pole for 5 to 6 diameter pole Wall Mount Coax Brackets for standard or snap-in hangers with 7x 3/8 and 3/4 hole pairs (11 length) with 14x 3/8 and 3/4 hole pairs (23 length) for 1/2 cable and LMR-600, 10-pack for 7/8 cable, 10-pack for 1-1/4 cable, 10-pack for 1-5/8 cable, 10-pack Installation Tool for Snap-in hangers Clip-On Hanger Kits for 1/2 cable and LMR-600, 10-pack, includes hardware for 7/8 cable 10-pack, includes hardware Mini Cluster Snap-in Adapter Block, 10-pack with 3x 3/4 holes and 3x 3/8 holes for snap-in or standard hangers (mounts with or x). Hardware not included Three-way Snap-in Stand-off Adapter Only, 10-pack (order round member adapter x separtately below) Round Tower Universal Standoff Adapter, 10-pack with insert to convert 3/4 snap-in hole to 3/8 tapped hole for use with standard & clip-on hangers with adapter clamp for 1 to 2 diameter pole for 2 to 3 diameter pole for 3 to 4 diameter pole for 4 to 5 diameter pole Round Tower Universal Standoff Adapter, 10-pack (order round member adapter x separtately below) Stainless Steel Banding Kit Includes 100 ft. 1/2 band, 100 buckles and tool Star Support T-Bracket with 12x 3/8 and 12x 3/4 holes for 1½ to 5-9/16 OD round members or 2½ to 5 angle members Universal Strut for Snap-In Hangers, ft Section, 3/4 holes on 3 centers (cut to length) (UPSable)
3 GROUNDING PRODUCTS Grounding Kits Universal Grounding Kit for 1/4 to 1-5/8 cable, 5 ft. ground cable, lug unattached U Standard Grounding Kits for LMR-240 cable, 5 ft. ground cable, lug unattached U for LMR-400 cable, 5 ft. ground cable, lug unattached for LMR-600 cable, 5 ft. ground cable, lug unattached for LMR-900 cable, 5 ft. ground cable, lug unattached for 1/4 and 3/8 cable, 2 ft. ground cable, lug attached A for 1/2 cable, 2 ft. ground cable, lug attached A for 5/8 & 7/8 cable, EW90 Waveguide, 2 ft. ground cable, lug attached for 1-1/4 cable, 2 ft. ground cable, lug attached A for 1-5/8 cable, EW52/EW63 Waveguide, 2 ft. ground cable, lug attached A for 2-1/4 cable, 2 ft. ground cable, lug attached A Clip-on Grounding Kits for 1/2 Heliax cable, 5 ft. ground cable, lug unattached for 5/8 Heliax cable, 5 ft. ground cable, lug unattached for 7/8 Heliax cable, 5 ft. ground cable, lug unattached U for 1-1/4 Heliax cable, 5 ft. ground cable, lug unattached U Universal Copper Ground Bars - 5/8 to 1 spacing 2 x 10 with 10 hole pairs for 3/8 bolts, no hardware x 14 with 15 hole pairs for 3/8 bolts, no hardware x 12 with 26 hole pairs for 3/8 bolts, no hardware Universal Tinned Copper Ground Bars 2 x 10 with 10 hole pairs for 3/8 bolts, no hardware T 2 x 14 with 15 hole pairs for 3/8 bolts, no hardware T 4 x 12 with 26 hole pairs for 3/8 bolts, no hardware T Universal Copper Ground Bar with shelter mounting hardware 2 x 10 with 10 hole pairs for 3/8 bolts SB 2 x 14 with 15 hole pairs for 3/8 bolts SB 4 x 12 with 26 hole pairs for 3/8 bolts SB Universal Copper Ground Bar with tower mounting hardware 2 x 10 with 10 hole pairs for 3/8 bolts TB 2 x 14 with 15 hole pairs for 3/8 bolts TB 4 x 12 with 26 hole pairs for 3/8 bolts TB 3/8 Stainless Bolt Hardware Kit, includes 3/8-16 X 3/4 bolt, lockwasher and nut, 10-Pack Corrosion Preventing Compound, 5 oz. tube ft Rack Vertical Ground Bar Kit with 1/4-20 threaded hole pairs (5/8 centers), 1/4 x 5/8 x 36, with hardware ft Rack Vertical Ground Bar Kit with 1/4-20 threaded hole pairs (5/8 centers), 1/4 x 5/8 x 72, with hardware /04/13
4 GROUNDING PRODUCTS Shelter Mounting Bracket Kits Tower Mounting Bracket Kits for mounting ground bar to shelter (pair), includes hardware Anti-theft Shelter Mounting Bracket Kit includes special hardware and bit ASB Grounding Cable 19-Strand Copper, Insulated Green Jacket, (sold by the foot) #6 AWG (1/4 OD Jacket) GN #2 AWG (3/8 OD Jacket) GN for mounting ground bar to tower (pair), includes hardware Universal Mounting Bracket Kit for mounting ground bars to shelter or tower (4pcs), includes hardware Standoff Insulator to isolate ground bars from mounting surface (3/8-16 hardware not included) Universal One-hole Screw Lug for #4 to 14 AWG with 1/4 Bolt Hole, (with screw terminal) Universal One-hole Screw Lug for #8 to 1/0 AWG, with 3/8 Bolt Hole, (requires 1/4 allen wrench) One-Hole Crimp Lug, Standard Barrel, for #6 AWG cable, with 3/8 Bolt Hole One-Hole Crimp Lug, Standard Barrel, for #2 AWG cable, with 3/8 Bolt Hole Two-Hole Crimp Lug, Long Barrel, for #6 AWG, with 1/4 Bolt Holes, 5/8 spacing Two-Hole Crimp Lug, Long Barrel, for #2 AWG, with 1/4 Bolt Holes, 5/8 spacing Two-Hole Crimp Lug, Long Barrel, for #6 AWG, with 3/8 Bolt Holes, 1 spacing Two-Hole Crimp Lug, Long Barrel, for #2 AWG, with 3/8 Bolt Holes, 1 spacing Two-Hole (Elongated) Crimp Lug for #6 AWG cable, with 3/8 Bolt Holes, 3/4 to 1 spacing Suppressor Grounding Ring Lug for attachment to N-Female Bulkhead for #6 AWG wire Suppressor Grounding Ring Lug Cable Kit with #6 AWG Grounding Wire Attached, 6ft length Professional Hand Crimp Tool ol Adhesive Heat Shrink Tubing Kits (Pre-cut Lengths) to Crimp Cable Lugs to #8-#2 Awg Grounding Cable for #6 lugs (1/4 OD x 1-1/8 long) for #2 lugs (1/2 OD x 1-3/8 long) for general use (3/4 OD x 3 long) PK PK I3-25PK Standard Copper Ground Rod, 5/8 x 8 ft Ground Rod Clamp, 5/8, to secure #10-#2 AWG ground wire to ground rod Heavy Duty Long Copper Ground Rod, 3/4 x 10 ft Ground Rod Clamp, 3/4, to secure #10-#2 AWG ground wire to ground rod Ground Rod Driver Tool for 5/8 Ground Rods /8 Replacement Insert for Ground Rod Driver Tool /4 Insert for 5/8 Ground Rod Driver Tool ( above) /04/13
5 PORT PRODUCTS / WEATHERIZING Port Entry Feed-thru (4 ) Panels Single Hole, 5.5 x Single Hole, 7 x A 2-hole, 15.5 x 9.5 (1x2) hole, 20 x 9.5 (1x3) Feed-thru Boot (4 ) & Cushions with single hole 1/2 (shown) with 2 holes 1/2 (shown) with 3 holes 1/ with 4 holes 1/ with single hole 7/ with 2 holes 7/ with 3 holes 7/8 (shown) with 4 holes 7/ with 1 hole for EW52 Waveguide with 1 hole for EW63 Waveguide with 1 hole for EW90 Waveguide hole, 25.5 x hole, 17.5 x 17.5 (2x2) A Standard Port Cushions Blank (no holes) with 6 holes for LMR-400 coax with 1 holes for LMR-600 coax with 2 holes for LMR-600 coax with 3 holes for LMR-600 coax with 4 holes for LMR-600 coax with 1 hole for 5/8 Heliax holes, 23 x 17.5 (2X3) Cushion Plug for LMR-600, Pkg of for 1/2 Foam Coax, Pkg of for 7/8 Foam Coax, Pkg of Port Entry Sealing Cap (4 ) Fusion Tape, 20 foot roll Fusion Tape, 5 foot roll Universal Weatherproofing Kit Includes: 1 roll 2 PVC tape, 6 rolls 2-1/2 butyl rubber tape, 2 rolls 3/4 PVC tape Lace-Up Hoisting Grip for terminated or unterminated: LMR-600 and 1/2 Cable LMR-900 and 5/8 Cable /8 Cable /4 Cable Boot Assembly Only (order cushion insert separately) Cold Shrink Tubing (.48 to.95 ID) Adhesive Heat Shrink Tubing (by the foot) 1/4 OD Flexible /8 OD Flexible /2 OD Flexible /4 OD Flexible OD Flexible /2 OD Flexible Pre-Laced Hoisting Grip for unterminated: LMR-400 Cable LMR-600 and 1/2 Cable LMR-900 and 5/8 Cable /8 Cable /04/13
6
THE ONE SOURCE FOR ALL OF YOUR WIRELESS NEEDS
CATALOG V3 THE ONE SOURCE FOR ALL OF YOUR WIRELESS NEEDS 505.343.5371 sales@miroc.com miroc.com WIRELESS IS ALL WE DO Alliance Corporation is a full-service value-added distributor and manufacturer of
More informationSITE ACCESSORIES CATALOG USA.
SITE ACCESSORIES CATALOG USA 2019 www.trylon.com Pictorial Table of Contents Page 2 Sector V-Frames Page 4 RRU Mounts Page 5 Rotatable Standoff Mounts Page 6 Light Standoff Mounts Page 8 Medium Standoff
More informationAccessories. Introduction. Cable Hangers LINE PRODUCTS TRANSMISSION
Accessories Introduction While a number of cable related accessories are available on the market, RFS components are of the highest quality and are designed to provide years of trouble-free service. Together
More informationTransmission Line Support Systems
Cushion Hanger are used to support vertical and horizontal runs of coax and waveguide, and are available in the sizes listed on pages 6.02 6.04. They are easily attached to any tower or horizontal transmission
More informationHeavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
More informationWE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
More informationGood for ABS applications. Temperature rating -87ºF to 150ºF (-66ºC to 66ºC) Temperature rating -87ºF to 150ºF (-66ºC to 66ºC)
ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details 16-125 Replacement 30-9620 15, with PERMAPLUGS 30-9621 15, with zinc die-cast plugs 30-9624 15, with (Quick-Connect Plugs) 30-9920 15,
More informationFLEET ESSENTIALS QUICK REFERENCE GUIDE Fax Burke Street, Santa Fe Springs, CA 90670
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE FLEET ESSENTIALS QUICK REFERENCE GUIDE For new and innovative products, visit www.phillipsind.com (B-FE-ENG) 9-26-16 12070 Burke Street, Santa Fe Springs, CA 90670
More informationGrounding Accessories
Accessories Eaton offers a variety of grounding which are sold individually or as a kit. Kits are available as one kit per rack, allowing for ease of stocking and reordering. Vertical rack ground bar kit
More informationCastle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine
Castle Model TSM-35 Heavy Duty Screw Pocket Machine For Models with Serial Number 63658 and Above Items Included with Machine Part No. Description Qty B02964 9/64" Castle Premium Brad Point Drill Bit w/
More informationINSTALL INSTRUCTIONS DC C-EV. Installation Instructions: DC C-EV.
INSTALL INSTRUCTIONS DC6-48-60-0-8C-EV Installation Instructions: DC6-48-60-0-8C-EV INSTALL INSTRUCTIONS DC6-48-60-0-8C-EV Contents Section Description Page 1 Copyright 2 1.1 Disclaimer 2 1.2 Warnings
More informationCONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
More informationGrounding Solutions for Data Center Applications
Grounding Solutions for Data Center Applications B D A A C E G F E Legend For Typical Grounding Application (layout on following page) A) B) C) D) E) F) G) Vertical Rack Ground Bar Kit (see page 4) Horizontal
More informationNUMBER DESCRIPTION COST SUG. RETAIL. Truck Stuff Speakers. Truck Stuff Radio Knobs. Truck Stuff CB Coax Cable Connectors
NUMBER DESCRIPTION COST SUG. RETAIL Truck Stuff Speakers TSE-01005 Black PA Speaker 8 OHM, 12W PA Horn With Cord And 3.5mm Plug. (Displayed Dimensions: 5.5"H x 5.5"W x 4.75"D) $8.90 EACH $19.99 EACH CASE
More informationFLEXIBLE LOW LOSS COMMUNICATIONS COAX
FLEXIBLE LOW LOSS COMMUNICATIONS COAX LMR -100A Drop In Replacement For RG-316 / RG-174 LMR-100A-PVC LMR-100A-PVC500-500' Spool LMR -195 Drop In Replacement For RG-58 / RG-142 LMR-195 LMR-195-500 - 500'
More informationTable of Contents. Kit Maximum Examples Index by Kit Number Terms and Conditions...Inside Back Cover
Table of Contents Antenna Mounts Light Standoff Mounts...2 Medium Standoff Mounts...4 Heavy Standoff Mounts...6 Fixed Crossover Assemblies...8 Universal Crossover Assemblies...8 Hybrid Crossover Assemblies...9
More informationCOYOTE LCC (Low Count Closure)
PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.
More informationElectrical. Hardware & Fastening Solutions. Battery Supplies. J-Case Fuses - Regular... Page 162
Flag Style... Page 156 Electrical Batteries... Page 153 Mounting Pads (Adhesive Backed)... Page 161 Battery Supplies J-Case Fuses - Regular... Page 162 Booster Cable Supplies... Page 153 J-Case Fuses -
More informationFor a complete listing of kit contents, see page 225.
HS 455 Shrink Tube Kit - microseries Sealing & securing can now be taken to go! Contains 55 6" pieces of single wall 2-1 polyolefin, flexible type. I.D. ranges 1 8"- 1 2" in red, black, yellow and blue.
More informationHeavy-Duty Top Post Terminals Fits 6 to 1 gauge cables. Heavy-Duty Top Post Epoxy Coated Terminals
1 6 7 5 4 3 2 1 Fits positive or negative posts 2 Bolt locks firmly from left to right side 3 Lead Alloy 4 Steel inserts avoid stripping 5 Universal Holds cable or strap 6 Removable plate for easy assembly
More informationUNSIGNED HARDCOPY NOT CONTROLLED
Subject: APPROVED BY STATUS PURPOSE AFFECTED FUNCTIONS Flat Braid Cables Manager, Hardware Engineering Maintenance Revision Establishes the requirements for the fabrication of special-purpose electrical
More informationLoadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.
3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200
More informationGeneral Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
More informationGROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
More informationBattery Products. Call or Fax:
Call 905.820.6150 or 1.800.363.1588 ax: 905.820.6142 Email: sales@techspan.ca Battery Products What s New? Epoxy Coated Battery Terminals 3-Way Top Post Battery Terminals Quick Disconnect Top Post Battery
More informationMA-LINE TOOLS AND ACCESSORIES
INDEX BRUSHES BOILER... 14-4 CLEANING... 14-4 COPPER TUBE... 14-3 NYLON TUBE... 14-3 WHISK CONDENSER FIN... 14-4 BUSHINGS ANTI-SHORT... 14-6 CAULKING GUN... 14-2 CHUCKS MAGNETIC... 14-3 COPPER TUBE EXTENSIONS
More informationINTRODUCTION. Sincerely, Dan Ianello, PE President. Toll Free: NELLO Fax:
INTRODUCTION Nello Corporation specializes in the Communications Support Infrastructure market. We have a strategy of providing innovative and cost effective products to an industry that relies on quality,
More informationConnectors and Insulators
52 Connectors and Insulators Terminal Blocks Connectors and Insulators As the nuts and bolts of a marine electrical system, connectors perform important functions on board. By keeping current flowing efficiently,
More informationCastle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
More informationBATTERY. Connectors. Quick Cable products Lift Truck Parts Professionals
Only battery connectors that are UL & CUL listed - proven in both Canada & the USA for conductivity & safety. (Listed by UL STD.486A & CUL, when applied with Cable HexCrimp tools 4255-001, 4255-001M, 4255-001$
More informationM9/D (-020 thru -022) M11/D (-020 thru -022)
M/D (-020 thru -022) Item Description / Page Includes A Main Enclosure top cover / display panel assembly, leveling feet, hinge cover panels (side / back / base) B Reservoir / Drain Tube condensing coil,
More informationLMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless
More informationBusBars, Connectors, and Insulators
BusBars,, and Insulators BusBars and PowerPosts provide a safe and convenient way to insulate circuit wires and connect them together. Feed Through and CableClams enable the boater to safely pass wires
More informationInsulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
More informationPRODUCT CATALOG
www.hillsdaleterminal.com 2017 PRODUCT CATALOG Fuse Pullers 34 Heat Shrink Terminals 24 your needs or for additional information about our Heat Shrink Tubing 25 products and services. Heavy Duty Electrical
More informationINSTALL INSTRUCTIONS
INSTALL INSTRUCTIONS Models: 6005 & 6005TK (For Non Electric Mirrors) GM CK Body Style If your stock mirrors are stock electric the wrong set has been ordered. Do not attempt to manually extend or retract
More informationFuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
More informationWire and Cable Division
Wire, Cable, and Battery Accessories PRODUCT CATALOG 2012 Wire and Cable Division A division of the world's Largest and Most Modern Single-Site Battery Manufacturing Facility East Penn s Wire and Cable
More information3000SC Fiber Optic Splice Closure
3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic
More informationUnderground Distribution
Aluminum Flood-Seal TM Mechanical Connectors Save outlet space These connectors feature the Sweetheart TM outlet configuration that nests two equal-sized service cables from #6 to 2/0 or two different-sized
More informationMulti-Band Vertical Remote Antenna Tuner Add-on Kit for 43 Foot Multi-band Vertical Antennas Meters
Multi-Band Vertical Remote Antenna Tuner Add-on Kit for 43 Foot Multi-band Vertical Antennas 80-10 Meters DXE-MBV-ATU-1 DXE-MBV-ATU-1-INS Revision 3c DX Engineering 2012 P.O. Box 1491 Akron, OH 44309-1491
More informationM-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET
Please contact the Techline for the most current instruction information (800) FORD788.!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: The use of a floor hoist is
More informationInstallation Instructions for Lifeline MC Cable Splice Using Ceramic Standoffs
Technical Information Sheet # 402 Subject: Installation Instructions for Lifeline MC Cable Splice Using Ceramic Standoffs Classified by Underwriters Laboratories to UL 2196 for one hour installations For
More informationcircuit protection & wiring accessories
circuit protection & wiring accessories J J1 circuit breakers Circuit breakers and fuses are a cost-effective solution to protecting wiring, equipment and subsystems. While fuses are a one-time, disposable
More informationcircuit protection & wiring accessories
circuit protection & wiring accessories CIRCUIT BREAKERS P1 P BLOCKS & BUSBARS TERMINAL BLOCKS P2 P3 CONNECTORS, TERMINALS & FUSES P4 CLAMPS, CLEATS, CLIPS & TIES P5 P1 circuit protection & wiring accessories
More informationBonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationSpare Parts List ( ) BRC 40/22C - 230V E 03/27/17
Spare Parts List (1.008-062.0) BRC 40/22C - 20V 86417220-E 0/27/17 How to Use this Spare Parts List The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts
More informationCatalog. Performance Automotive Electrical Wiring Components. Street Rods Racecars Trucks Trailers. Off Road Marine RV's Street Machines
Performance Automotive Electrical Wiring Components Street Rods Racecars Trucks Trailers Off Road Marine RV's Street Machines Catalog Fastronix Solutions 1 2012A Welcome to Fastronix Solutions Your complete
More informationSUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
More informationSection 8. Parts A Issued 7/00. Manual V -MA -01 (formerly 7-505/6V -MA -01) E 2000 Nordson Corporation All rights reserved
Section 8 E 000 Nordson Corporation 00 497A Manual 47-506V -MA -0 (formerly 7-505/6V -MA -0) 8-0 Manual 47-506V -MA -0 (formerly 7-505/6V -MA -0) 00 497A E 000 Nordson Corporation 8- Section 8. Introduction
More informationSpecialty Electrical Supplies and Tools
Specialty Electrical Supplies and Tools Connectors Terminals Tools Battery Accessories Circuit Protection Cable Ties & Accessories San Diego, California Office Phone 619.278.1302 * Fax: 619.542.9994 Electrical
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
More informationLCD Annunciator Installation Instructions
4603-9101 LCD Annunciator Installation Instructions Cautions and Warnings DO NOT INSTALL ANY SIMPLEX PRODUCT THAT APPEARS DAMAGED. Upon unpacking your Simplex product, inspect the contents of the carton
More informationFullsize Van & Sprinter Lowtop
IEA INSTRUCTION MANUAL H3 SERIES ALUMINUM + Endcap Fullsize Van & Sprinter Lowtop 2002-06 z Required Tools 1/2 Wrench Power Tool with Phillips head PART # DESCRIPTION 1Bar 2 BAR 3 BAR 4bar ITEMs (not drawn
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationFor reference, there is a photograph of a completed upgrade on the last page of this document, refer also to drawing that is attached.
VIGILANT F3200 PSU UPGRADE FROM 3A TO 6A Overview These instructions describe the steps necessary to upgrade a 3A, AS4428 F3200 panel to a 6A version. The upgrade involves replacing the panel s existing
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationM-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET
Please visit www.fordracingparts.com for the most current instruction information.!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationGrounding equipment COOPER POWER SERIES. Temporary Connections CA325004EN. Contents
Temporary Connections CA325004EN Supersedes November 2016 Grounding equipment COOPER POWER SERIES Contents Description Page Grounding elbow products... 2 Grounding elbow and kit product ratings... 5 200
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Newport Harbor Mate Utility Center
Newport Harbor Mate Dimensions Height: 14.50" (368.30 mm) Width: 10.50" (266.70 mm) Depth: 10.40" (264.16 mm) Newport Harbor Mate Utility Center Diagram 2.77" Approximate Weight: 11 lbs. (5.0 kg) 10.31"
More informationFCategory 5e 110 Wiring
110 Cross Connect System FCategory 5e 110 Wiring Blocks and Accessories Category 5e 110 Field Installable Patch Cord Plugs Category 5e 110 Wiring Block Kits Category 5e 110 Patch Cords 110 Rack and Wall
More informationPARTS LIST CHARGER 2020 AB CHARGER 2020 DB
PARTS LIST CHARGER 2020 AB CHARGER 2020 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450
More informationG R E E N L I T E. c a b l e a c c e s s o r y c o r p o r a t i o n
G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n GT Nylon Cable Ties 4 GT Nylon Cable Ties - Color 5 GS Screw-Mount
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS
TITAN pt. no.: 99 0000 0509 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS I n B e d F u e l T a n k Shown
More informationCold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions
Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Class I Indoor Termination Voltage Designation: 12/20(24) kv Kit Contents: 1 HeatShrinkBreakoutBootAssembly 3 HeatShrinkBindingSleeves
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Hatteras Light Pedestals
Hatteras Light Power Pedestal Dimensions Height: 31.00" (787.40 mm) Width: (190.50 mm) Depth: (190.50 mm) Hatteras Light Base Diagram Approximate Weight: 14 lbs. (6.4 kg) 1.73" UL FILE # E133781 Ø0.41
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 01 0000 0136 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationFax: PO Box 100, 2222 Moore Rd. Jonesville, MI
1-800-447-3150 Fax: 1-517-849-9516 PO Box 100, 2222 Moore Rd. Jonesville, MI 49250 www.hillsdaleterminal.com INDEX Adapters...12 Battery & Welding Cable...17 Battery Terminals...16 Bullet Connectors...10
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory HITCH Application 2012 CROSSTOUR Publications No. AII 46198 Issue Date JULY 2011 PARTS LIST Trailer Hitch Kit P/N 08L92-TP6-101 Upper spacer A (5 mm) (Some are not used.)
More informationPOLE MOUNTED CAPACITOR RACKS
POLE MOUNTED CAPACITOR RACKS -1- Index BACPMR1 BACPMR3 BACPMR6 Catalog Number Description BACPMR1 For mounting single capacitor. BACPMR3 For mounting up to 3 capacitors in line. BACPMR3/4 For mounting
More informationMEDIUM VOLTAGE
WWW.GENERGYCABLE.COM 800-308-1330 TM MEDIUM VOLTAGE MEDIUM VOLTAGE ASSEMBLIES Type SH Medium Voltage Power Cable Assemblies are designed for heavy-duty MV applications that require temporary or permanent
More informationRecoverXLT Refrigerant Recovery Machine
RecoverXLT Refrigerant Recovery Machine Liquid and Vapor Recovery Set Up Liquid recovery is the fastest method, but not all equipment can handle the process Vapor recovery is slower than liquid recovery,
More informationCable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:
QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which
More informationSeismic Sensor Accessories SA, SV & ST 6000 Series
Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28
More informationCIRCUIT PROTECTION SOLUTIONS FOR AUTOMOTIVE APPLICATIONS. Automotive Commercial Vehicle Products (CVP)
CIRCUIT PROTECTION SOLUTIONS FOR AUTOMOTIVE APPLICATIONS Automotive Commercial Vehicle Products (CVP) Power Distribution Centers Flexible Electrical Center 92 FLEC Flexible Electrical Center 92 Hard-Wired
More informationACCESSORY BROCHURE U.S. November 2015
ACCESSORY BROCHURE U.S. November 2015 www.trylon.com Pictorial Table of Contents Page 5 Light Standoff Mounts Page 6 Crossover Kits Page 10 Backing Assemblies Page 11 Tie-Back Kits Page 11 Face Mount Frames
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 03 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationHeat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
More informationProduct Name Chair Conversion Kit (to Console Delivery Unit) Installation [Kit # xx]
Elevance Product Name Chair Conversion Kit (to Console Delivery Installation Unit) Installation [Kit #002-1965-xx] Attention: Use this kit to convert an Elevance Chair to a Chair with an Elevance Console
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 02 0000 0180 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationCPCS the U.S.A.
Clampsticks "AKA" Shotgun Sticks feature a high quality foam filled fiberglass reinforced plastic tube providing maximum insulation and mechanical strength. They are lightweight and easy to handle. Feature
More informationSRX Corvette C-6 Installation Tips
SRX INSTALLED RADAR & LASER DEFENSE SYSTEM by ESCORT SRX Corvette C-6 Installation Tips We recommend bench assembling the entire system if you are a first time installer. We also recommend reading the
More informationCustom Dynamics Spyder Stingerz Installation Instructions
Custom Dynamics Spyder Stingerz Installation Instructions We thank you for purchasing the Custom Dynamics Stingerz! Our products utilize the latest technology and high quality components to ensure you
More informationRP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
More informationTransmission Line Support Systems
Coax Bridge Kit Each Coax Bridge Kit provides rooftop support for coax transmission lines on three PVC sleepers and protects the coax from damage with an long steel cover. The three series of products
More informationTG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
More informationBattery Cables. Wire & Cable
Battery Cables Why Use Larger Cable? Low-voltage power systems with inverters can have very high current through the cables that connect the inverter to the batteries. Large AC loads like microwave ovens,
More informationAEV30207AA Last Updated: 2/14/ Dualsport xt suspension INSTALLATION GUIDE
AEV30207AA Last Updated: 2/14/12 2.5 Dualsport xt suspension INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS THOROUGHLY BEFORE
More informationWirelessONE. Kit INSTALLATION GUIDE. Key Fob Activated Compressor System
Kit 25870 Key Fob Activated Compressor System MN-751 (041202) ECR 7260 INSTALLATION GUIDE For maximum effectiveness and safety, please read these instructions completely before proceeding with installation.
More informationNumatic International Spare Parts Model No: Numatic International Spare Parts Model No: NB: FOR WIRING SEE DRAWING: DRW-7279
TTB 0 BASE ASSEMBLY EXPLODED DRAWING NB: FOR WIRING SEE DRAWING: DRW- 0 0 0 0 0 0 0 0 0 0 0 DRAWING: DRW-0 ISS:A0 /0/0 0 TTB 0 BASE ASSEMBLY EXPLODED DRAWING TTB 0 CHASSIS WELDED ASSEMBLY 0 TTB 0 HANDLE
More informationHeat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
More informationForm No Parts List for: MODEL B ELECTRIC HYDRAULIC PUMP. Maximum Capacity: 10,000 PSI PE55TWP-IBT-115. Sheet No. 1 of 8
Parts List for: Form No. 1000457 PE55TWP-IBT-115 MODEL B ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI 1 2 3 7 SPX Hydraulic Technologies, Rockford, IL 61109 USA www.powerteam.com Made in USA 309219Rev7
More information5830 Skylight, Solar Smart Retrofit Installation
Introduction The Solar Smart has a mounting bracket that allows the operator to rotate slightly to reduce wear and tear on the chain drive system for greater performance and reliability. Because of this
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More information3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series
3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working
More information"STAR-M" WOOD WORKING TOOLS - Japan
Produced from specially alloyed tool steel. Sharp and precisely hardened cutting edges for easy boring, cleaner holes and longer tool life. Designed for heavy-duty work. NO. S 6-1 Item No. Size O.L Twist
More informationInstallation Instructions for Lifeline MC: Cable Splice Using Ceramic Standoffs Technical Information Sheet #402
Installation Instructions for Lifeline MC: Cable Splice Using Ceramic Standoffs Technical Information Sheet #402 Classified by Underwriters Laboratories to UL 2196 for one hour installations For use with
More informationParts and Accessories Installation Instructions
Parts and Accessories Installation Instructions Installation kit, sound module MINI (R5) Cooper S (R53) Left-hand drive (LHD) Not suitable for vehicles with option SA 69 (navigation system with on-board
More information