Bi-Directional Coupler
|
|
- Eric Cross
- 5 years ago
- Views:
Transcription
1 Bi-Directional Coupler DC Pass, High Power 50Ω 30dB Coupling 200W 225 to 450 MHz The Big Deal High power handling, up to 200W High directivity, 28 db Low insertion loss, 0.15 db Product Overview Mini-Circuits high-power bi-directional coupler provides high power handling up to 200W and mainline loss of 0.15 db. Covering frequencies from 225 to 450 MHz, it supports a wide variety of applications from power amplifiers and antenna feeds to military applications and more. High directivity of 28 db provides accurate sampling from the coupled port, and 30 db typical input/output return loss provides excellent matching over full frequency range. The coupler is fabricated using laminated PCB process (1.0 x 1.0 x ) and includes wrap-around terminations for good solderability and easy visual inspection. Key Features Feature Low mainline loss, 0.15 db High power handling, 200W Excellent return loss, 30 db typ. (input and output) High directivity, 28 db DC current passing up to 200W total power. Advantages Provides excellent through-path signal transmission. Usable in systems with a wide range of power requirements. The power handling capability is verified into a 50Ω load and into open and short with full reflected power, making it suitable for a wide range of transmission monitoring applications. Provides excellent matching for 50Ω systems. High directivity allows accurate signal sampling through the coupled port with minimal measurement error. Suitable for use in systems requiring DC current at later stages. Mini-Circuits P.O. Box 0166, Brooklyn, NY (718) sales@minicircuits.com Page 1 of 3
2 DC Pass, High Power Bi-Directional Coupler 50Ω 30dB Coupling 200W 225 to 450 MHz Maximum Ratings Operating Temperature, case* -55 C to 105 C Storage Temperature -55 C to 105 C DC+RF power 200W *Case temperature is defined as temperature on base plate. Permanent damage may occur if any of these limits are exceeded. Pad Connections** INPUT 1 OUTPUT 3 COUPLED FORWARD 7 COUPLED REVERSE 5 GROUND 2,4,6,8 **Model is Bi-directional and all ports are interchangeable, see port function table. TOP SIDE B BOTTOM SIDE 1 2 E F TYP MCL INDEX A D TYP Outline Drawing G TYP C D TYP J TYP. H SUGGESTED PCB LAND PATTERN H M J TYP L TYP METALLIZATION Outline Dimensions ( inch mm ) A B C D E F G K M K SOLDER RESIST H J K L M wt grams Features high directivity, 28 db typ. excellent return loss, 30 db typ high power, up to 200W DC current pass through input to output Applications Power Amplifiers Antenna Feeds VHF/UHF radios Defense and military Electrical +25 C Electrical Schematic CASE STYLE: PQ2074 Parameter Condition (MHz) Min. Typ. Max. Units Frequency Range MHz Insertion Loss db Coupling ±1.5 db Coupling Flatness (±) db Directivity db Return Loss (Input) db Return Loss (Output) db Return Loss (Coupling) db Input Power (DC+RF) 1, W 1. Under all system matching conditions, with base plate maintained at 105 C 2. Verified with 50Ω load, open and short at RF out. Demo Board MCL P/N: TB-861 Suggested PCB Layout (PL-468)*** *** Wraparound solder on ground pins may not be shown PACKAGE OUTLINE.040 REF. TYP..080±.002 LINE WIDTH 4 PL. (SEE BELOW) REF. Input Port function interchange Output Coupled Forward Coupled Reverse REF. Ă.020 PTH. TYP. FOR GROUND NOTES: 1. TRACE WIDTH IS SHOWN FOR ROGERS RO40B WITH DIELECTRIC THICKNESS..020"±.0015". COPPER: 1/2 OZ. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH MAY NEED TO BE MODIFIED. 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE. DENOTES PCB COPPER LAYOUT WITH SMOBC (SOLDER MASK OVER BARE COPPER) DENOTES COPPER LAND PATTERN FREE OF SOLDERMASK Mini-Circuits P.O. Box 0166, Brooklyn, NY (718) sales@minicircuits.com REV. A M EDR RAV Page 2 of 3
3 Typical Performance Data * FREQUENCY Mainline Loss Coupling Directivity Return Loss (MHz) In - Out In-Cpl Fwd Out-Cpl Rev In-Cpl Fwd Out-Cpl Rev In Out Cpl Fwd Cpl Rev -55 C +25 C +105 C -55 C +25 C +105 C -55 C +25 C +105 C * Data at +25 C unless specified otherwise Mainline Loss -55 C +25 C +105 C Coupling In-Cpl Fwd Out-Cpl Rev Mainline Loss Coupling In-Cpl Fwd -55 C In-Cpl Fwd +25 C In-Cpl Fwd +105 C Directivity Out-Cpl Rev-55 C Out-Cpl Rev+25 C Out-Cpl Rev+105 C Return Loss Directivity Return Loss In Out Cpl Fwd Cpl Rev Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box 0166, Brooklyn, NY (718) sales@minicircuits.com Page 3 of 3
4 Bi-Directional Coupler Typical Performance Data TEST CONDITIONS: INPUT POWER =+10 = -55 C FREQ. INSERTION LOSS COUPLING DIRECTIVITY RETURN LOSS (MHz) In - Out Rev - Fwd In Fwd Rev - Out In - Rev Out - Fwd Out Rev In Fwd REV. OR Page 1 of 3
5 Bi-Directional Coupler Typical Performance Data TEST CONDITIONS: INPUT POWER =+10 = +25 C FREQ. INSERTION LOSS COUPLING DIRECTIVITY RETURN LOSS (MHz) In - Out Rev - Fwd In Fwd Rev - Out In - Rev Out - Fwd In Out Rev Fwd REV. OR Page 2 of 3
6 Bi-Directional Coupler Typical Performance Data TEST CONDITIONS: INPUT POWER =+10 = +105 C FREQ. INSERTION LOSS COUPLING DIRECTIVITY RETURN LOSS (MHz) In - Out Rev - Fwd In Fwd Rev - Out In - Rev Out - Fwd In Out Rev Fwd REV. OR Page 3 of 3
7 Bi-Directional Coupler Typical Performance Curves Insertion Loss Insertion Loss vs. TEMPERATURE Insertion Loss Insertion Loss Insertion Loss In-Out -55 C 0.06 Insertion Loss Rev-Fwd +25 C C Coupling Loss Coupling Loss vs. TEMPERATURE Coupling Loss Coupling Loss In-Fwd Coupling Loss Rev-Oud Coupling Loss C Directivity Directivity vs. TEMPERATURE Directivity Directivity Directivity In-Rev -55 C 19 Directivity Out-Fwd +25 C C REV. OR Page 1 of 2
8 Bi-Directional Coupler Typical Performance Curves Return Loss Return Loss In vs. TEMPERATURE C C Return Loss Return Loss C Return Loss In Return Loss Out Return Loss Rev Return Loss Fwd Return Loss Out vs. TEMPERATURE 10 Return Loss Reverse vs. TEMPERATURE Return Loss C Return Loss C Return Loss Forward vs. TEMPERATURE Return Loss C 10 REV. OR Page 2 of 2
9 Case Style Outline Dimensions PQ PQ2074 MCL CASE# A B C D E F G H J K L M WT. GRAMS PQ (25.40) (25.40).051 (1.30).075 (1.90).700 (17.78).013 (0.33).050 (1.27) (26.65).080 (2.03).750 (19.05).050 (1.27).015 (0.38) 4.0 Dimensions are in inches (mm). Tolerances: 2PL. +/-.03; 3PL. +/-.010 Notes: 1. Base material: Printed wiring laminate. 2. Termination finish: For RoHS Cases, all models (+) suffix: 2-5 µinch ( microns) Immersion Gold. For RoHS-5 Cases, all models no (+) suffix: Tin-Lead plate. 98-PQ Rev. H Feb. 15, 2018 M (R91795) File: 98-PQ (H).doc Sheet 1 of 18 This document and its contents are the property of Mini-Circuits
10 Tape & Reel Packaging TR-F117 MCL MCL Tape Width, Device Cavity Reel Size, Devices per Reel mm Pitch, mm inches Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: 98-TR-F117 Rev.: A (09 Feb 2016) M File: 98-TR-F117(A).doc Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.
11
12
13
14 Mini-Circuits Environmental Specifications ENV02T8 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55 to 105 C Case Environment Individual Model Data Sheet Storage Temperature -55 to 105 C Ambient Environment Individual Model Data Sheet Humidity 90 to 95% RH, 240 hours, 50 C MIL-STD-202, Method 103, Condition A, Except 50 C and end-point electrical test done within 12 hours Thermal Shock -55 to 100 C, 100 cycles MIL-STD-202, Method 107, Condition A-3, except +100 C Solder Reflow Heat Sn-Pb Eutectic Process 225 C peak Pb-Free Process C peak J-STD-020C, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage Vibration (high Frequency) 20g peak, Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-883, Method , Condition A Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-202, Method 213, Condition A Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25 C; terpene defluxer at 25 C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63 C to 70 C MIL-STD-202, Method 215 ENV02T8 Rev: OR 06/14/16 M File: ENV02T8.pdf This document and its contents are the property of Mini-Circuits. Page: 1
COUPLING MAINLINE LOSS * (db) (db) Max. L M U U 1 L M U U 1 L. Max.
Surface Mount top hat Directional Coupler 75Ω, 20dB coupling, 5 to 1250 MHz Maximum Ratings Operating Temperature -40 C to 85 C Features very flat coupling Storage Temperature -55 C to 100 C very broadband,
More informationTypical Performance Data
Surface Mount Attenuator/Switch 75Ω Bi-Phase to Maximum Ratings Operating Temperature -4 C to 85 C Storage Temperature -55 C to C Control Current 3mA Permanent damage may occur if any of these limits are
More informationPower Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationPTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
More informationPTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
More informationTemperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationMonolithic Amplifiers 50Ω, Broadband, DC to 8 GHz
Surface Mount Monolithic Amplifiers 50Ω, Broadband, DC to 8 GHz Features InGaP HBT microwave amplifiers miniature SOT-89 package frequency range, DC to 8 GHz, usable to 10 GHz up to 18.2 dbm typ. output
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 AUTOMOTIVE APPLICATION (AEC-Q200 COMPLIANT)... 5
CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 AUTOMOTIVE APPLICATION (AEC-Q200 COMPLIANT)... 5 NP0 Series... 6 X7R Series... 10 TEST SPEC.... 16 MLCC PACKAGE... 20 OTHERS... 24
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationMACP TB. 23 db Coupler MHz Rev. V1. Features. Functional Schematic. Description. Pin Configuration 4. Ordering Information 1,2
23 Coupler Features 23 Coupling Ratio Surface Mount Package Available on Tape and Reel Excellent Temperature Stability RoHS Compliant and Pb Free 260 C Reflow Compatible Description The MACP-0145 is a
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationWW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationModel C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationTemperature Coefficient of Resistance, Tracking Maximum Operating Voltage
627, 628 Series.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor etworks RoHS Compliant ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature
More informationPOLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More information74x Series Chip Resistor Arrays
Features Low Cost Thick Film Technology Leadless Surface Mount Construction Concave Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuit Configurations Improved TCR Tracking
More informationThin-Film Directional Couplers
6 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF LGA Coupler is based on thin-film multilayer technology. The technology provides a miniature part with
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More informationSPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF ROHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF-14871365 ROHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationNov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
More informationSinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationQTCT230 SERIES 2.5 x 3.2mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 45.
Description Q-Tech s surface-mount QTCT230 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
More informationFrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF-10300024 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 6/04/04 ** 5/13/2010 SRJ 5/13/2010
More informationSF-0603SP150M SF-0603SP200M SF-0603SP250M
E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer
More informationHigh Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 50 A Suitable for insert assembly systems Material categorization: For definitions of
More informationGeneral Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationSPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationSPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503 Revision Made: ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationWirewound Chip Inductors
EATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) and J (0603) RoHS Compliant includes all homogeneous materials HIGH CURRENT AND LOW *See Part Number System for Details RELOW SOLDERING APPLICABLE
More informationMetal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features Side view white LED White SMT package Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationRadial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
More informationDATA SHEET NTC thermistors, accuracy line. BCcomponents
DATA SHEET 2322 640 6... N thermistors, accuracy line Supersedes data of April 1995 File under BCcomponents, BC02 1998 Sep 04 FEATURES Accuracy over a wide temperature range High stability over a long
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationReference Only. Spec.No. JENF243H-0008M-01 P 1/ 14. Rated Current. Withstanding Voltage 20A 125V (DC) (DC) 250V (DC) 20A (DC) 20A 40V (DC) (DC) (DC)
Spec.No. JENF243H-0008M-01 P 1/ 14 SMD Block Type EMIFIL BNX02-01 Reference Specification 1.Scope This reference specification applies to SMD Block Type EMIFIL. 2.Part Numbering BN X 022-01 L Product ID
More informationAfter 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More information3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
More informationPRODUCT SPECIFICATION
of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationSummary of Packing Options Packing Options
9 Mechanical Data 9 Mechanical Data The following section describes the mechanical specifications of products in this Telecom Design Guide. Gas Plasma Arresters Package Dimensions / Specifications........................
More information1025HC Fast-acting, high current, surface mount ceramic tube fuses
Supersedes February 2017 Fast-acting, high current, surface mount ceramic tube fuses HALOGEN HF FREE Applications Primary and secondary circuit protection: Server and desktop power supplies Gaming console
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
More informationProduct Datasheet P MHz RF Powerharvester Receiver
DESCRIPTION The Powercast P1110 Powerharvester receiver is an RF energy harvesting device that converts RF to DC. Housed in a compact SMD package, the P1110 receiver provides RF energy harvesting and power
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More information3M Three-Wall and Four-Wall Headers. Series 3XXX
1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationLow TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL
Low TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL The Rejustor is a precision, electrically-adjustable resistor from Microbridge. The Rejustor can be adjusted to a precision of 0.1%, or better. The
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationPolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationApplications. Car audio. Robo
Rotary Position Sensor High Rotational Life Type Features High Durability: 1M cycles Pb Free Soldering: 260 C Operating Temperature: -40 C to +85 C Terminal Shape: SMD Type and Lead Type Rotational Rotor:
More informationS505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses
Technical Data 10401 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED lighting LED/LCD televisions Appliances
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationATN3580 Series: Fixed Attenuator Pads
DATA SHEET ATN3580 Series: Fixed Attenuator Pads Applications Attenuators Features Specified flat response to 40 GHz Return loss > 15 db Available at 1-10, 12, 15, 20, 30, and 40 db Power handling to 1
More informationFeatures 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
More information