Cemented Carbide. Saw Tips for Forestry & Woodworking
|
|
- Kerry Hunter
- 6 years ago
- Views:
Transcription
1 Cemented Carbide Saw Tips for Forestry & Woodworking T& D Materials supplies whole cemented tungsten carbide saw blades, cemented tungsten carbide tipped saw blades, strobe blanks for circular saws and rectangular strip blanks. T&D manufactures different grades of cemented carbide tips for different working materials like frozen wood, soft wood, hard wood, laminated wood, MDF, and HDF. In addition to tungsten carbide tips, we also supply cermet saw tips. We supply the following materials for saw tips. All other properties requirements are available. Customer fabrication is available upon customer request. ISO HARDNESS HRA DENSITY g/cc BINDER % TRS VALUE psi K ,000 K ,000 K ,000 K ,000
2
3 GRADES, PROPERTIES, AND RECOMMENDED APPLICATIONS Physical & mechanical properties Grade Density g/cm 3 Hardness HRA Typical values TRSN/mm 2 (Sample B) YG YG YG6X YG6A YG8C YG11C YL YD YM YS2T YS Recommended applications Universal grades widely used in machining tools for castiron,nonferrous metals and their alloys and nonmetal materials, wear parts,and tools for machining other alloys Suitable for the semi-finishing of hard castiron,nonferrous metals and their alloys, and also suitable for the semifinishing and finishing of common castiron and high manganese steel work-pieces and for other tools. Mainly used for rock drilling, auger tips and well drilling tools and at the same time for drilling stone walls,cement in construction and installation work,and for machining stone materials. Mainly used for manufacturing strips and disc cutters and also for other tools. Mainly for manufacturing strips and also for other tools. Mainly used for disc cutters and also for other tools Suitable for the rough and finishing of stainless steel,finishing of high strength steel,finishing and semi-finishing of hardened steel,and the machining of iron based heat resistant alloys and glass articles.
4 ORDER PRODUCTS Type L L L L H h r R
5 ORDER PRODUCTS Type A B L H R
6 ORDER PRODUCTS Type L H B h r R B
7 ORDER PRODUCTS Type A H h h h r R
8 ORDER PRODUCTS Type L L L L H h h r R
9 ORDER PRODUCTS Type L L L L H h h h h h h r r r r R R R
10 ORDER PRODUCTS Type A A B B L L L L R R R
11 ORDER PRODUCTS Type A B C R
12 ORDER PRODUCTS Type A B C ,6, ,9, ,11, ,15, ,17, ,20,8
13 RECOMMENDED GRADES FOR CEMENTED CARBIDE CUTTERS Physical & mechanical properties Grade Density g/cm 3 Hardness HRA Typical values TRSN/mm 2 (Sample B) YS2T YL Recommended applications An ultra fine cemented carbide with tungsten powder and binder cobalt. Good toughness and wear resistance, suitable for low speed cutting allowing a big rake angle, ensuring the sharpness of the edges, bearing a heavy cutting force and achieving good surface finish. With good transversal rupture strength and wear resistance, it is suitable for low-speed rough turning and milling of heat resistanct alloys, titanium alloys and of plastics glass well.
14 Designation of the Types : ΦD Φd H TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS Type Dimensions O.D(D) I D(d) Thickness(H) Φ11 Φ Φ14 Φ Φ14 Φ Φ14 Φ Φ15.5 Φ Φ15.5 Φ Φ15 Φ Φ16.5 Φ Φ17 Φ Φ17 Φ
15 TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ17 Φ Φ17 Φ Φ17 Φ Φ18.5 Φ Φ18.5 Φ Φ18 Φ Φ19 Φ Φ19 Φ Φ20 Φ Φ20 Φ Φ20 Φ Φ20.5 Φ Φ20.5 Φ Φ21 Φ Φ22 Φ Φ25 Φ Φ26 Φ
16 TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ26 Φ Φ26 Φ Φ26 Φ Φ26 Φ Φ26 Φ Φ26 Φ Φ26 Φ Φ26 Φ Φ30 Φ Φ33 Φ Φ33 Φ Φ41.7 Φ Φ41.7 Φ Φ47 Φ Φ47 Φ Φ52 Φ Φ52 Φ
17 TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ52 Φ Φ57 Φ Φ61.5 Φ Φ61.5 Φ Φ64 Φ Φ64 Φ Φ64 Φ Φ64 Φ Φ64.5 Φ Φ65 Φ Φ65 Φ Φ72 Φ Φ72 Φ Φ72 Φ Φ72 Φ Φ72 Φ Φ73 Φ
18 TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ73 Φ Φ73 Φ Φ73 Φ Φ73 Φ Φ76 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ76.5 Φ Φ78 Φ
19 TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ83 Φ Φ102 Φ Φ102 Φ
20 TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ102 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ103 Φ Φ108 Φ Φ108 Φ Φ108 Φ Φ108 Φ Φ108 Φ Φ112 Φ
21 TYPES AND DIMENSIOINS OF CEMENTED CARBIDE CIRCULAR CUTTERS (CONT D) Type Dimensions O.D(D) I D(d) Thickness(H) Φ113 Φ Φ113 Φ Φ113 Φ Φ113 Φ Φ113 Φ Φ115 Φ Φ115 Φ Φ115 Φ Φ115 Φ Φ118 Φ Φ118 Φ Φ118 Φ Φ118 Φ Φ118 Φ Φ128 Φ Φ128 Φ Φ128 Φ Φ203 Φ Φ250 Φ
ENGINEERED COMPONENTS. Carbide Rods Asia
ENGINEERED COMPONENTS Carbide Rods Asia Your supplier for tungsten carbide blanks Kennametal, The Wear Parts Experts At Kennametal, we strive to offer our customers outstanding performance in everything
More informationMeticulous attention to detail combined with a wealth of experience from our people. Perfection. Innovation. Competence. Partnership.
PRODUCT CATALOGUE Meticulous attention to detail combined with a wealth of experience from our people. Perfection. Innovation. Competence. Partnership. 2 3 OUR CARBIDE GRADES AF K10 UF AF K20 CF AF K34
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationHard metals for precision tools
Hard metals for precision tools EN Production sites Tianjin China Taiwan Shanghai Changtai Xiamen 1+2 Tamshui Wugu ispatching centre Logistics centre Kempten, Germany 2 product line Carbide products from
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationmax. 1, Ø Plate Kerf Bore Z Hook Ground
11 Multi-rip Saw Blade With Raker 0 0 Ø Plate Kerf Bore Z Z Hook Ground Excellent blade with special rakers for ripping cuts in solid wood, dry or wet. The carbide rakers protect the saw body to guarantee
More informationCONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
More informationCarbide Burrs and Steel Brushes
Carbide Burrs Tungsten Carbide Burrs 288 Steel 305 287 Carbide Burrs Tungsten Carbide Burrs Flexovit tungsten carbide burrs are manufactured on state of the art CNC machines to give high consistency and
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationSTRONG. DURABLE. VERSATILE.
www.greenlee.com Reciprocating Saw Blades PROFESSIONAL GRADE BLADES FOR DEMANDING APPLICATIONS STRONG. DURABLE. VERSATILE. Bi-Metal BETTER for metal, general purpose, wood with nails, drywall and plaster
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationCustomer Service Plastics & Composites. Nailembedded Nonferrous. Stainless. Drywall / Plaster. Cement Abrasives. Tile & Wood BEST BETTER
Hole Saws Hole Saw SELECTION GUIDE GOOD BETTER BEST Wood 2 Nailembedded wood Nonferrous METAL Plastics & Composites CARBIDE GRIT CARBIDE TIPPED BI-METAL CARBIDE GRIT Metal Stainless Steel Drywall / Plaster
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More information2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
More informationHolemaking ADVANCES 2017 Inch
Holemaking ADVANCES 2017 Inch Holemaking Introduction... Q1 Q8 Solid Carbide Drills... R1 R139 Modular Drills...S1 S51 Indexable Drills... T1 T60 Hole Finishing... U1 U95 Q1 Holemaking Made Easy and Economical
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationINDEX. Wolferal Saw & Tool Selection Manual The Jones Tool Co Ltd Introduction. Our 58th YEAR
Wolferal Saw & Tool Selection Manual 2007 INDEX Our 58th YEAR Characteristics of Cutting Steels and Saw Tooth Forms 2-3 Wolferal Premium Quality Cutting-Off Saw Blades 4-14 Wolferal Cutting Performance
More informationSpecial drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More informationYour guide to the right drill bit
Drilling 44 Drilling Overview Bosch Accessories 11/12 Your guide to the right drill bit These information pages are designed to help the user. They describe the correct use of the appropriate power tool
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More information"STAR-M" WOOD WORKING TOOLS - Japan
Produced from specially alloyed tool steel. Sharp and precisely hardened cutting edges for easy boring, cleaner holes and longer tool life. Designed for heavy-duty work. NO. S 6-1 Item No. Size O.L Twist
More informationMilling Tools Milling Tools
HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationIncreased productivity with higher amp hours Our batteries have a higher amp hour rating than most of our competitors. 2.8 amp hours v. 2.
The Right Tool The Right Batter When it comes to making holes on the jobsite, electrical contractors reach for Greenlee s power tool accessories to get the job done whether it be our Nail Eater Auger Bits,
More informationCOMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More informationProduct Catalog. GREENTOOL Co.,Ltd. Carbide End Mill GT Series. Flute shape corresponding to work Materials!! Coating excellent in durability!!
GREENTOOL Co.,Ltd. Product Catalog Carbide End Mill GT Series Point 1 Point 2 Point 3 Flute shape corresponding to work Materials!! Coating excellent in durability!! Possible change order of specification!!
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationGRINDING. Grinding Wheels
Grinding Wheels GRINDING Industry leading grinding wheels, burrs and points from Walter are manufactured with productivity in mind and under the most stringent quality control standards. Grain, bond and
More informationCERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationTYPE CCH HYDRAULIC CASING CUTTER
Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, U.K. DD11 3RD Tel: +44 (0) 1241 877776. Fax: +44 (0) 1241 871037 E-mail: sales@pioneeroiltools.com Website: www.pioneeroiltools.com
More informationDIAMOND HSS PRO GLASS & TILE HAMMER DRILL BITS ROTARY DRILL BITS METAL DRILL BITS WOOD DRILL BITS
110 MASONRY DRILLING A DRILL BIT FOR EVERY MATERIAL SPEEDHAMMER PLUS SPEEDHAMMER POWER SPEEDHAMMER MAX MASONRY GRANITE CORDLESS MULTI GLASS & TILE DIAMOND HSS PRO HSS COBALT HSS TIN TCT TURBOMAX STEP DRILL
More informationRight rotation. Left rotation
HAND AUGER 35 to 150 mm CONTINUOUS FLIGHT AUGERS HAND AUGER Thread - auger 22 conical 20/27 Square rod 23 Square rod 32 35 F5 01003501 - - - 46 F5 01004602 - - - 63 F5 01006302 F5 01006303 F5 01006301-80
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationGrooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationWorkpiece support can be readjusted without tools.
ESSENTIAL FOR EVERY WORKSHOP. Good tools are worth their weight in gold and should always be in perfect working order. Rust needs to be removed for example, or the screw driver needs to be ground. Whether
More informationBosch: Focusing on progress.
Bosch: Focusing on progress. The concrete and masonry range. Hammer and stone drilling, chiselling 2 Overview Bosch Accessories Accessory range Overview Innovative and efficient products ensure successful
More informationFor the Professional/Contractor Flap Discs for Angle Grinders
Flap Discs for Angle Grinders Vortec Abrasive Pro Coated Abrasive Flap Discs save both time and money! No need to switch from a Type 27 grinding wheel to a resin fiber disc because flap discs grind and
More informationTHE FUTURE NEEDS STEEL
THE FUTURE NEEDS STEEL Schmiedewerke Gröditz GmbH produces open-die forgings and seamless rolled ring products which can be supplied either rough or finish-machined on request. And in this way it pursues
More informationCONTINUOUS FLIGHT AUGERS AND BITS
Mobile Standard Construction and HEX-COR augers have been tested in the field and independently tested in the laboratory and are proven to be equal to or stronger than any other auger in the industry.
More informationWheels Stocklist 2017
Wheels Stocklist 17 Cafro S.p.A. Via Raimondi, 55-273 Fino Mornasco - Como, Italy Tel +39 031 880150 Fax +39 031 880260 E-mail cafro@cafro.com www.cafro.com About Us CAFRO is the name of a South African
More informationP r i c e s E f f e c t i v e June 1, Price List. C o v e
1 P r i c e s E f f e c t i v e June 1, 2017 STYLEX Price List C o v e Product Information Applications: Lounge General Information Dimensions / Overview Fixed-Height Swivel Fixed-Height Swivel Return
More informationwipes ready technology
MUFFIN MONSTER 1K series Muffin Monster The 1K Series Muffin Monster is a compact grinder, tough on solids in sludge and sewage applications. It fits into areas with limited space requirements while still
More informationGEAR GENERATION GEAR FORMING. Vipin K. Sharma
GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.
More informationFOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationVELCRO & ADHESIVE BACKED DISCS. Page FLAP DISCS & FLAP WHEELS CUTTING & GRINDING DISCS QUICK CHANGE DISCS. Pages ,173 POLISHING & LAPPING
200 ABRASIVE SHEETS & COILS Pages... 160,161 201 ABRASIVE SPONGES 202 FIBRE BACKED DISCS 203 VELCRO & ADHESIVE BACKED DISCS 204 SANDING BELTS 205 SANDING BANDS & CARTRIDGE ROLLS Page................. 161
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationRAISE PRODUCTIVITY WITH TUNGSTEN CARBIDE INSERTS
MINING & ROAD RAISE PRODUCTIVITY WIT TUNGSTEN CARIDE INSERTS ------- Element Six offers a wide range of standard and customised Tungsten Carbide inserts that increase productivity and significantly outperform
More informationEnd Mills with Coolant Through using 15 Positive Inserts for Profiling & Contouring. Remember to use COPASLIP anti-seize compound on all insert screws
End Mills with Coolant Through using 15 Positive Inserts for Profiling & Contouring Designation d³ d¹ d² l¹ l² tmax -0500-36.500.185.625 3.65 1.74 1.64 10 1-0500-44.500.185.625 4.40 2.49 2.39 10 1-0500-51.500.185.625
More informationCemented Carbide. Blades for Motor Grader, Snow Removal, and Road Maintenance. Cemented Carbide Strips
Cemented Carbide Blades for Motor Grader, Snow Removal, and Road Maintenance T&D Materials is committed to meeting the needs and exceeding the expectations of our customers through production and supply
More informationAline tables. 230 range. Digital-brochure-230-Aline-tables-02-SR
Digital-brochure-230-Aline-tables-02-SR-171207-1032 (1/3) Aline tables. s for multipurpose areas. In addition to bar stools, multipurpose and task chairs, the Aline range also offers round and square low,
More informationCircuit Breaker Lockout, Standard And Double Toggles Breaker, Rohs Compliant LOCKOUT,STD AND DOUBLE BREAKER. RoHS Compliant
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 44957 Lockout, STD and Double Breaker Ideal Catalog Number 44957 Manufacturer Ideal Circuit Breaker Lockout, Standard
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationBULK HANDLING CONSTRUCTION OF CONVEYOR BELT ROLLERS
BULK HANDLING CONSTRUCTION OF CONVEYOR BELT ROLLERS INDEX 4 PHYSICAL PROPERTIES OF THE MATERIALS 6 DETERMINATION OF THE LOAD 8 DESCRIPTIONS 30 Self-centering troughing triple set 31 Flat troughing sets
More information"ISHII" TILE CUTTING TOOLS - Japan
NO. S 70-1 "ISHII" PORTABLE PRO ACE CLINKER CUTTER NO. AWE-630XA The machine comes with JW aluminum curved handle, thick base sponges, long aluminum sliding extension side arm, 200mm protractor gauge and
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More information2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES!
2012 CATALOG FEATURING NEW PRUCTS AND ADDITIONAL SIZES! BEST VALUE IN THE WORLD OF CUTTING TOOLS YG-1 CO., LTD. FOR INFORMATION TOLL FREE : 1-800-765-8665 1 CONTENTS INSERTED DRILLS 3 9 i - DREAM DRILLS
More informationExpanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationHOLE SAWS THE LENOX ADVANTAGE P O W E R T O O L A C C E S S O R I E S
P O W E R T O O L A C C E S S O R I E S HOLE SAWS 14 CUSTOMER SERVICE 877-438-5615 A complete line of premium hole making solutions For metal, wood and abrasives. Unique designs for performance and productivity
More informationANNEX. ANNEX II: Customs duties of SACU on products originating in the EU Part 4
NNEX NNEX II: Customs duties of SCU on products originating in the EU Part 4 Code Description Sector Staging category Other comments and/or 72.16 ngles, shapes and sections of iron or non-alloy steel:
More informationTable Of Contents. API B Series Pumping Units 03. API C Series Pumping Units 05. API F Series Pumping Units 08. API R Series Pumping Units 09
Table Of Contents API B Series Pumping Units 03 API C Series Pumping Units 05 API F Series Pumping Units 08 API R Series Pumping Units 09 Bimetal Anti-Corrosion Tubing 10 Casing 12 1 www.sapwellsglobal.com
More informationSPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...
Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................
More informationTHE FUTURE NEEDS STEEL
THE FUTURE NEEDS STEEL Schmiedewerke Gröditz GmbH produces open-die forgings and seamless rolled ring products which can be supplied either rough or finish-machined on request. And in this way it pursues
More informationThe MARTOR Blade Range
The MARTOR Range MARTOR KG 42648 Solingen, Germany Phone +49 212 25805-0 Fax +49 212 25805-55 info@martor.de www.martor.com Listing of Contents Page This is how MARTOR-s are made... 4 -Index 5 s in numerical
More information"ALPEN" TUNGSTEN CARBIDE-TIPPED DRILLS - Austria
"ALPEN" TUNGSTEN CARBIDE-TIPPED DRILLS - Austria Brick Composits Concrete Natural Masonry drill type Long Life, milled flutes, for percussion and rotary drilling of concrete, brick, natural stone etc.
More informationScreening Crushing Mixing Aerating Loading Stabilizing. ALLU D - Series. Screener Crusher
Screening Crushing Mixing Aerating Loading Stabilizing ALLU D - Series Screener Crusher ALLU Attachments - at your service! The quality tools for your job site If your job requires fi ne fragment size,
More informationall around precision
all around precision PG Mini Small, universal, but above all absolutely precise: PG Mini, a new line of tools and accessories designed to meet every working need. Cutting, sanding, smoothing, drilling,
More informationSaint-Gobain Abrasives South-East Asia ABRASIVE SOLUTIONS
Saint-Gobain Abrasives South-East Asia ABRASIVE SOLUTIONS SAINT-GOBAIN ABRASIVES The world s leading abrasives manufacturer Saint-Gobain Abrasives, the world s leading manufacturer of abrasives, offers
More informationAUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers
AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers The McMillen Auger Drives by Paladin, feature a wide variety
More informationCut-to-size saw fh6 430 / 160 Auto load
Cut-to-size saw fh6 430 / 160 Auto load Automatic infeed Drawing number: fh6 430/160 Machine number: Delivery date: TBD TBD Project based requirements, machine type fh6 Name: Information Working pressure:
More informationTOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
More informationDrilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
More informationHI-CUT - Steel. CUMISTAR - Stainless Steel ZIRCONIA. Depressed Centre Grinding Wheels - Type 27
MADRAS INDIA. Depressed Centre Grinding Wheels - Type 2 HI-CUT - Steel Universal grinding wheel for all metal working; High performance wheels suited for weld and edge grinding 5 5 5 2 5 2 Type 2 5 CUMISTAR
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationcircular saw blades side milling cutters
edition 04 / 2018 circular saw lades side milling cutters cutting-off, sawing, milling Overview Information aout the catalogue 2 Tools 4 Circular knives 34 Special tools 36 Technical information 38 1 Grüezi
More informationSTEEL BELTS PLUS TOTAL SERVICE FOR THE WBP INDUSTRY
We are world leaders in the supply of premium quality steel belts for the high productivity manufacture of WBP products including particle board, MDF and OSB. Our global service network provides responsive
More informationBONDED BONDED SANDING FLAP DISCS FLAP DISCS BONDED DIAMOND ABRASIVES
DIAMOND BONDED FLAP DISCS FLAP DISCS SANDING BONDED BONDED ABRASIVES www..co.uk PERFORMANCE SO GOOD IT RAISES YOURS DEMAND DeWALT ABRASIVES All of our EXTREME rated bonded abrasives comprise of: A high
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationGSP - High Tech Saws. GSP - High Tech Saws, s.r.o. Hlavní 51, Zborovice CZECH REPUBLIC. saw blades knives cutters
GSP - High Tech Saws GSP - High Tech Saws, s.r.o. Hlavní 51, 768 32 Zborovice CZECH REPUBLIC saw blades knives cutters GSP - High Tech Saws, s.r.o., resident in Zborovice, is a traditional cutting tools
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationNEW from Osborn...ATB Ceramic Filament
NEW from Osborn...ATB Ceramic Filament About Osborn Since Osborn s inception in 1887, success has always been about ensuring that you finish first. Whether it was last century, last week or in the last
More informationINDEX BUCKETS - Available Components - Typical Bucket - Bucket Construction
INDEX BUCKETS - Available Components - Typical Bucket - Bucket Construction QUALITY UNDERCARRIAGE - Trackpads - Chain Track Assemblies LARGE HYDRAULIC EXCAVATOR COMPONENTS - Slew Bearings - Idlers - Rollers
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationQuick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More information3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions
3M Industrial Products Abrasives and Power Tools for Welders Welding Solutions What s New for2011 3 4 1 2 5 6 1 2 3 3M Cubitron II Fibre Discs 987C The coolest way to increase productivity. If you work
More informationSuper Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
More informationTRIP Equipment Requirements
TRIP Requirements Recovery Wrecker Specifications All eligible COMPANIES must have either one 50-Ton Recovery Truck OR one 40-Ton Rotator AND One 30-Ton Heavy Duty Wrecker. The qualifications listed below
More information