Table Of Contents. API B Series Pumping Units 03. API C Series Pumping Units 05. API F Series Pumping Units 08. API R Series Pumping Units 09

Transcription

1

2 Table Of Contents API B Series Pumping Units 03 API C Series Pumping Units 05 API F Series Pumping Units 08 API R Series Pumping Units 09 Bimetal Anti-Corrosion Tubing 10 Casing

3 Tubing 14 Subsurface Sucker Rod Pump 16 Sucker Rod 18 Contact Us

4 API B Series Pumping Units API B series Pumping Units is a kind of conventional walking beam pumping units. It s the ground power equipment used in sucker rod oil extraction. The products conform to API Spec. 11E Specification for Pumping Units and other re1ative API Standards. It acquired the authorization to use the Official API Monogram. 1. High reliability, simple operation, easy maintenance, long service life. 2. Gear reducer is involu1e herring-bone gearing, work smoothly and reliably. 3. The complete machine with light weight, it's convenient for installation and transportation 3

5 N Type Polished rod Capacity (Lbs) Stroke Length (IN) Rate Torque (IN. Lbs) 1 B-80D ,900 64, 54 80,000 2 B-80D ,600 64, 54 80,000 3 B-80D ,300 54, 41 80,000 4 B-80D ,900 54, 41 80,000 5 B-80D ,600 54, 41 80,000 6 B-80D ,900 48, 35 80,000 7 B-57D ,900 54, 41 57,000 8 B-57D ,900 54, 41 57,000 9 B-57D ,600 54, 41 57, B-57D ,900 48, 35 57, B-57D ,900 48, 35 57, B-40D ,900 48, 35 40, B-40D ,600 42, 29 40, B-25D ,700 36, 27 25, B-16D ,300 30, 23 16,

6 API C Series Pumping Units API C series Pumping Units is a kind of conventional walking beam pumping units. It s the ground power equipment used in sucker rod oil extraction. The products conform to API Spec. 11E Specification for Pumping Units and other re1ative API standards. It acquired the authorization to use Official API Monogram. 1. Strength of critical parts is calculated with the finite element analysis, high reliability, simple operation, easy maintenance, long servicing life 2. Gear reducer is involu1e herring-bone gearing, work smoothly and reliably. 3. Modularized design. It has high degree of standardization, commonality and seriation with the spare parts 5

7 N Type Polished rod Capacity (Lbs) Stroke Length (IN) Rate Torque (IN. Lbs) 1 C-912D , , 211, ,000 2 C-912D , , 185, ,000 3 C-912D , , 165, ,000 4 C-912D , , 165, ,000 5 C-912D , , 144, ,000 6 C-912D , , 144, ,000 7 C-912D , , 123, ,000 8 C-640D , , 165, ,000 9 C-640D , , 144, , C-640D , , 123, , C-640D , , 123, , C-640D , , 123, , C-640D , , 102, , C-456D , , 144, , C-456D , , 123, , C-456D , , 123, , C-456D , , 102, , C-456D , , 102, , C-456D , , 102, , C-320D , ,123, , C-320D , , 102, , C-320D , , 102, , C-320D , , 85, , C-320D , , 85, , C-320D ,300 86, 71, , C-238D , , 102, , C-238D , , 86, , C-238D ,600 86, 71, , C-238D ,300 86, 71, , C-238D ,000 74, 64, , C-238D ,300 74, 64, , C-160D ,300 86, 74, , C-160D ,000 74, 64, , C-160D ,300 74, 64, , C-160D ,300 74, 64, , C-160D ,300 64, 54, , C-114D ,900 86, 72, , C-114D ,300 74, 62, , C-114D ,300 64, 54, , C-114D ,300 64, 52, , C-114D ,300 54, 45, ,

8 42 C-80D ,900 64, 53, 42 80, C-80D ,900 54, 45, 36 80, C-80D ,900 54, 45, 36 80, C-80D ,300 48, 40, 32 80, C-80D ,900 48, 37, 25 80, C-57D ,600 54, 41, 28 57, C-57D ,900 48, 37, 35 57, C-57D ,500 48, 37, 35 57, C-57D ,900 42, 33, 23 57, C-57D ,600 42, 33, 23 57, C-40D ,600 48, 37, 27 40, C-40D ,900 42, 33, 23 40, C-40D ,600 42, 33, 23 40, C-40D ,900 36, 38, 20 40, C-25D ,700 36, 38, 20 25, C-25D ,600 36, 38, 20 25, C-25D ,300 30, 20 25,

9 API F Series Pumping Units API C series Pumping Units is a kind of conventional walking beam pumping units. It's the ground power equipment used in sucker rod oil extraction. The products conform to API Spec. 11E Specification for Pumping Units and other re1ative API standards. It acquired the authorization to use Official API Monogram. 1. High reliability, simple operation, easy maintenance, long service life. 2. Gear reducer is involu1e herring-bone gearing, work smoothly and reliably. 3. The complete machine with light weight, it's convenient for installation and transportation N Type Polished rod Capacity (Lbs) Stroke Length (IN) Rate Torque (IN. Lbs) 1 F-320D , , 102, ,000 2 F-320D , , 85, ,000 3 F ,600 86, 71, ,000 4 F-228D ,600 86, 71, ,000 5 F-228D ,300 86, 71, ,000 6 F-228D ,600 86,71, ,000 7 F-228D ,600 74, 64, ,000 8 F-160D ,600 86, 74, ,000 9 F-160D ,000 74, 64, , F-160D ,300 74, 64, , F-114D ,300 64, 54, , F-114D ,300 54, 44, , F-114D ,900 54, 43, ,

10 API R Series Pumping Units API R series Pumping Units is a new type energysaving walking beam pumping units. It s the ground power equipment used in sucker rod oil extraction. The products conform to API Spec. 11E Specification for Pumping Units and other re1ative API standards. It acquired the authorization to use Official API Monogram. 1. High reliability, simple operation, easy maintenance, long service life. 2. Use phase angle in crank arm in order to reduce the peak value of max. torque in gear reducer. 3. To improve power performance by increase the extreme location angle. 4. It can reduce motive power, saved energy obviously. 5. Gear reducer is involute herring-bone gearing, work smoothly and reliably. N Type Polished rod Capacity (Lbs) Stroke Length (IN) Rate Torque (IN. Lbs) 1 R-912D , , 159, ,000 2 R-912D , , 159, ,000 3 R-912D , , 139, ,000 4 R-912D , , 139, ,000 5 R-640D , 159, ,000 6 R-640D , , 139, ,000 7 R-640D , , 139, ,000 8 R-456D , , 139, ,000 9 R-456D , , 119, , R-456D , , 99, , R-320D , , 119, , R-320D , , 99, , R-320D , , 83, , R-228D , , 83, , R-228D ,600 86, 72, ,

11 Bimetal Anti-Corrosion Tubing Bimetal anti-corrosion tubing is the special-purpose pipe used in oil, gas and water to extract the oil, gas and water to the surface. The bimetal anticorrosion tubing has the outside layer formed by ordinary J55, N80, T95, P11O new or used tubing, use the corrosion-resistant alloy material as the inside lining. The lining are push to the outside layer by the conflagration inside the pipe. The tubing conforms to API Specification 5CT, 5B and other related standards, authorized to use the APl monogram. 1. The tubing inside lining is lubricity, no fouling which could enhance the liquid flow quantity effectively. 2. Tubing is thermo stable with good ability to stand high pressure; the service life is 6 times longer than normal drill tubing. 3. Superior quality, reasonable price, and it is a kind of new anticorrosive tubing. 10

12 Grade Base Tube J, N, L, C, T, P Liner Tube Ordinary Stainless steel, double-phase stainless steel, titanium alloy and so on other anti-corrosive alloy material Wall Conform to API specification 0.4mm 1.5mm or based on customer s requirement OD The outer diameter allowable deviation is not higger than the base tube outer diameter allowable deviation Temperature -40 C C Compound level surface cutting separation intensity Longitudinal Strength Line Tube Pressure Ability External pressure ability > 0.5Mpa > Base tube longitudinal strength >Base tube anti-intrinsic ability Is equal to the base tube anti-external pressure ability 11

13 Casing Specialized large-diameter pipe lowered into an open hole and cemented in place. Casing conform to latest version of API Specification 5CT, API Specification 5B and other related standards. Casings are available in standard API configurations with all sizes from 5"" to 13 3 / 8 " in grade H40, J55, N80, L80, C90, P11O and Q High thread bonding strength with good anti-thread gluing ability. 2. The steel yield strength is bigger than API standard. 3. Big OD size, high steel grade with full size available. 12

14 CASING Size OD in (mm) Wall inches in (mm) Length ft (mm) 5 5(127.00) ( ) 5 ½ 5.5 (139.70) ( ) 6 ⅝ (168.28) ( ) 7 7 (177.80) ( ) 7 ⅝ (193.68) ( ) ⅝ (219.08) ( ) ( ) 9 ⅝ (244.48) ( ) 10 ¾ (273.05) ( ) 11 ¾ (298.45) ( ) 13 ⅜ (339.72) ( ) Full Automatic Weighing, Length Measuring Hydrostatic Pressure Testing and Ink Jet 13

15 Tubing Tubing is the special-purpose pipe that used in the oil, gas and water well to extract the oil, gas and water to the surface. The tubing conforms to API Specification 5CT, 5B and other related standards, authorized to use the API monogram. Standard, EUE and bimetal anticorrosion tubing are available at all sizes in grade J, N, C, L, T, P which all of them conform to API latest specification. Adopting the advanced production line crack detecting, quenching, the continuous overall tempering and sand blasting processes to achieve higher mechanical strength ability with overall good performance. 1. The thread is cut by the special-purpose numerical control lathe which keeps the rod body still when cutting the threads. The special process could ensure the high precision of the thread with better reliability and life-span. 2. Coupling phosphor or copper coated to achieve good wearing-resistance ability and anti-thread gluing ability. 14

16 Tubing Coupling Size OD In (mm) Wall in Standard EUE in (mm) Grade 2 ⅜ 2.375(60.33) 2.594(65.90) 0.190(4.83) J55 N80 2 ⅞ 2.875(73.03) 3.094(78.60) 0.217(5.51) L80 C90 3 ½ 3.500(88.90) 3.750(95.20) 0.254(6.45) T95 P110 OD In (mm) Min length In (mm) Size Grade In Standard EUE Standard EUE 2 ⅜ 4 ¼ 4 ⅞ 2.875(73.03) 3.063(77.90) (107.95) (123.83) J55 N80 2 ⅞ 5 ⅛ 5 ¼ L80 C (88.90) 3.668(93.20) (130.18) (146.05) T95 P110 3 ½ 5 ⅛ 5 ¾ 4.250(108.00) 4.500(14.30) (142.88) (146.05) End width In (mm) Standard 3/16 (4.76) Length ft (mm) 28 32( ) Weight Lbs (Kg) EUE Standard 3/16 (4.76) 2.82(128) 7/32 (5.56) 5.15(2.34) ¼ (6.35) 8.17(3.71) EUE 3.43 (1.55) 5.29 (4.10) 9.03 (4.10) 600t Oil Processing Tube End Upset High Grade Of Steel Quenching And Tempering 15

17 Subsurface Sucker Rod Pump The subsurface sucker rod pump is an important equipment of rod extracting system that extracts the fluid in the oil well by using the power supplied by pumping units and sucker rod. The products conform to APl Specification 11AX and other related standards, authorized to use the API monogram. Special sucker rod pump such as tubing pump, rod pump, sand control pump, anti-salt pump and etc are available. 1. The pump barrel machined by using the high quality special-purpose blank, the internal surface has the chrome-plating or the nickel phosphorus compound plating superficial strengthening processing to achieve the good intensity, the rigidity, wear-resistance and anticorrosion. 2. The plunger surface uses the nickel base alloy powder to spurt welding to achieve good wear-resistance and anticorrosion ability. 3. The valve ball and the valve seat made by using high-carbon chromium stainless steel or ceramics or tungsten carbide material to achieve longer life span. 4. The pump efficiency is high, pump inspection cycle is longer. 5. Simple structure with easy installation and usage. 16

18 17

19 Sucker Rod Tire sucker rod is a steel rod tl1at used to make up tile mechanical assembly between the surface and downhole components of a rod pumping system. The products conforms to API Specification 11B (Oil extraction rod Standard) and other related standards, authorized to use the API monogram. All sizes of sucker rod (standard, heavy, polish rod) which conform to API specification latest version 11B are available in grade K, C, D and HL. 1. Adopting the advanced production line crack detecting, quenching, the continuous overall tempering and sand blasting processes to achieve higher mechanical strength ability with overall good performance. 2. The thread is cut by the special-purpose numerical control lathe which keeps the rod body still when cutting the threads. The special process could ensure the high precision of the thread with better reliability and life-span. 18

20 Sucker Rod OD In (mm) ⅝ (15.88) ¾ (19.05) ⅞ (22.23) 1 (25.40) 1 ⅛ (25.58) Thread OD In (mm) 15/16 (23.81) 1 1/16 (26.99) 1 3/16(30.16) 1 ⅜ (34.93) 1 9/16 (39.69) Coupling OD In (mm) 1 ½ (38.10) 1 ⅝ (41.28) 1 13/16 (46.04) 2 3/16 (55.56) 2 ⅜ (60.33) Standard Length ft (mm) 30(9140) : 26(8000) : 25(7620) Grade Min Y.S psi (Mpa) Min T.S psi (Mpa) Max T.S psi (Mpa) K (414) (620) (793) C D (568) (793) (965) HL (793) (966) (1136) Rod Head Forging Full Automatic Temperature-Control Continuous Heat Treatment 19

21 Contact Us United States: Sapwells Global Corp Westheimer Suite 1100 Houston, Texas USA P: F: website: Colombia: Sapwells Global Corp Calle 94A No. 11A-66 Primer Piso Bogota D.C Colombia Tlf: website: