PROFLEX FLEXIBLE SPRINKLER HOSES (PAGE 1/5)
|
|
|
- Avis Woods
- 5 years ago
- Views:
Transcription
1 FLEXIBLE SPRINKLER HOSES (PAGE 1/5) DESCRIPTION A flexible sprinkler hose assembly consists of a braided or unbraided hose with on one side an inlet connection for the branch line, and on the other side an outlet NPT connection to the sprinkler head. Thanks to the quick and easy installation procedure, labor cost and labor time are decreased to a minimum. The Proflex is 100% pressure tested in the factory. ASSEMBLY TECHNICAL INFORMATION /UH Proflex 1000 Braided hose / Unbraided hose PF 1200 BH/UH Proflex 1200 Braided hose / Unbraided hose PF 1500 BH/UH Proflex 1500 Braided hose / Unbraided hose Flexible hoses do not exceed 1800mm, since FM/UL/VdS do not approve these lengths. Bar fixing clamp Center bracket Bar Bar fixing clamp Reference Outlet DN25 Schedule 40 pipe (ft - m) Number of bends 1/2 4.6 (1,2) / (14,7) 2 PF 1200 BH 1/ (17,0) / (26,4) COMPONENTS PF 1500 BH 1/ (20,6) / (,8) 4 1 Flexible sprinkler hose 2 Nipple 1 Reference Outlet DN25 Schedule 40 pipe (ft - m) Number of bends Sprinkler reducer NPT outlet 4 Center bracket PF 1000 UH 1/2 6 (11,0) /4 42 (12,8) 1 5 Bar fixing clamps (x2) 6 Bar PF 1200 UH 1/2 67 (20,4) /4 7 (22,) PF 1500 UH 1/2 84 (25,6) /4 77 (2,5) CERTIFICATES Braided set Unbraided set Certificates FM, UL and VdS UL approval info@profittings.cn
2 UNBRAIDED HOSES (PAGE 2/5) TECHNICAL INFORMATION UNBRAIDED HOSES PF 1000 UH PF 1200 UH PF 1500 UH Proflex 1000 Unbraided hose Proflex 1200 Unbraided hose Proflex 1500 Unbraided hose UNBRAIDED HOSES DIMENSIONS UNBRAIDED HOSES PF 1000 UH PF 1200 UH PF 1500 UH Length without fittings (ft / mm) 2.7 / / / 140 Length with fittings (ft / mm). / / / 1500 Diameter (inch / mm) 0.98 / / / 25 Minimum bending radius (inch / mm) 5 / / / 125 Weight (kg) 0,41 0,410 0,460 DN25 Schedule 40-1/2 (ft / m) DN25 Schedule 40 - /4 (ft / m) 6 / 11,0 67 / 20,4 84 / 25,6 42 / 12,8 7 / 22, 77 / 2,5 Pressure (PSI / kpa) 200 / / / 180 Nut thread M4 x 1,5 M4 x 1,5 M4 x 1,5 MATERIAL UNBRAIDED HOSES Material Nut Carbon steel (M4) Hose Stainless steel AISI 04 info@profittings.cn
3 BRAIDED HOSES (PAGE /5) TECHNICAL INFORMATION BRAIDED HOSES PF 1200 BH PF 1500 BH Proflex 1000 Braided hose Proflex 1200 Braided hose Proflex 1500 Braided hose BRAIDED HOSES DIMENSIONS BRAIDED HOSES PF 1200 BH PF 1500 BH Length without fittings (ft / mm) 2.7 / / / 140 Length with fittings (ft / mm). / / / 1500 Diameter (inch / mm) 1.04 / 26, / 26, / 26,5 Minimum bending radius (inch / mm) 11.8 / / / 00 Weight (kg) 0,542 0,642 0,742 DN25 Schedule 40-1/2 (ft / m) DN25 Schedule 40 - /4 (ft / m) 4.6 / 1, / 17, / 20, / 14, / 26, /,8 Pressure (PSI / kpa) 200 / / / 180 Nut thread M4 x 1,5 M4 x 1,5 M4 x 1,5 MATERIAL BRAIDED HOSES Material Nut Carbon steel (M4) Hose Stainless steel AISI 04 info@profittings.cn
4 NIPPLE AND REDUCER (PAGE 4/5) TECHNICAL INFORMATION NIPPLE PF - NIPPLE - ST Nipple 1 Carbon steel DIMENSIONS NIPPLE Length A (inch / mm) 2.5 / 65 Weight (kg) 0,1 Pressure (Psi / kpa) 200 / 180 Nut thread braided hose NPT 1 - M4 x 1,5 Nut thread unbraided hose NPT 1 - M4 x 1,5 TECHNICAL INFORMATION REDUCER PF - STR - NPT - 1/2 (/4) Sprinkler reducer Carbon steel DIMENSIONS REDUCER PF - STR - NPT - 1/2 PF - STR - NPT - /4 Length A (inch / mm) 4.4 / / 110 Length C (inch / mm) 0.98 / / 0 Diameter 1-1/2 1 - /4 Weight (kg) 0,28 0,28 Pressure (Psi / kpa) 200 / / 180 Reducer thread braided hose NPT 1/2 - M4 x 1,5 NPT /4 - M4 x 1,5 Reducer thread unbraided hose NPT 1/2 - M4 x 1,5 NPT /4 - M4 x 1,5 info@profittings.cn
5 BAR, CLAMPS AND CENTER BRACKET (PAGE 5/5) TECHNICAL INFORMATION BAR PF 700 B Standard bar 700 mm Carbon steel DIMENSIONS BAR PF 700 B Length A (inch / mm) 27.6 / 700 Height B (inch / mm) 0.59 / 15 Weight (kg) 0,245 TECHNICAL INFORMATION CLAMPS PF - STC Bar fixing clamp Carbon steel DIMENSIONS CLAMPS PF - STC Length A (inch / mm) 2.4 / 59,5 Length B (inch / mm) 1.19 / 0,2 Weight (kg) 0,040 TECHNICAL INFORMATION CENTER BRACKET Material PF - STB Center bracket Carbon steel DIMENSIONS CENTER BRACKET S - BR Length A (inch / mm) 2.54 / 64,5 Length B (inch / mm) 1.97 / 50 Weight (kg) 0,067 info@profittings.cn
Data Sheet 3.01 Issue C
Description Rapidrop Flexible Sprinkler Hose connects the sprinkler to the branch pipe. The flexible stainless steel hose and fittings are particularly suited for use in suspended ceiling applications.
Model VKFD28 Flexible Sprinkler Drops (LPCB Approved) Installation Manual. January 2016 Form No. F_ Rev 16.1
Model VKFD28 Flexible Sprinkler Drops (LPCB Approved) Installation Manual January 2016 Page 2 of 10 TABLE OF CONTENTS Section Description Page 1 Benefits 3 2 Installation Instructions 3 3 Technical Data
KOFULSO /Easyflex flexibles sprinklers drop distributed by
KOFULSO /Easyflex flexibles sprinklers drop distributed by Simplicity Flexibility Affordability No pipe cuting 100% corrosion-resistant 33 flexibles sprinklers drop distributed by ROLLAND Assembly KOFULSO
Data Sheet 3.03 Issue D
Description Rapidrop Flexible Sprinkler Hose connects the sprinkler to the branch pipe. The flexible stainless steel hose and fittings are particularly suited for use in suspended ceiling applications.
Data Sheet 3.11 Issue F
General Description Rapidrop flexible sprinkler hoses are typically used as an alternative to traditional hard pipe arm overs and are particularly suited for use in suspended ceiling applications. The
Flexible Sprinkler Connector Braided & Unbraided
Model: FX / FXU Technical Features Hose Types: raided or Unbraided Hose Lengths:, 6, 8, 60, 7 Maximum Working Pressure: 75 PSI Maximum Working Temp: 5 F K factor: ½ Outlet 5.6, ¾ Outlet 8.0 onnections:
FIRE PROTECTION PRODUCTS
FIRE PROTECTION PRODUCTS Rev.0119 6 info@ayvaz.com www.ayvaz.com 1 FIRE PROTECTION PRODUCTS ANGULAR EXPANSION JOINTS GIMBAL TYPE SEISMIC EXPANSION JOINTS Bellow Material Stainless Steel AISI 321 (Opt.
Grinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
Grooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
In-Line Balanced Pressure Proportioner (ILBP) Proportioning Devices Model KBP
1 General description The KCA In-Line balanced pressure proportioner (ILPB) is a foam proportioning device which is used to balance the higher foam concentrate pressure to the lower system water pressure
127 (5) Approx (1.85) Overmold. Male Coupling Nut. Straight Micro Female 63.5 (2.5) 127 (5) Approx. Overmold Coupling Nut Straight Mini Female
KwikLink Lite Flat Drop General Quick Selection Introduction KwikLink Lite Drop Cordset with 4-wire unshielded cable. Device connection options include 5 pin mini and micro as well as flying leads. Physical
I-VICFLEX.AB7 VicFlex Sprinkler Fittings for Ceiling Suspension Systems STYLE AB7
INTRODUCTION WARNING Read and understand all instructions before attempting to install any Victaulic VicFlex products. Wear safety glasses, hardhat, and foot protection. These installation instructions
Listings and Approvals. G5 QR Gasket culus QR G5 SR Gasket culus, FM SR G5
Model Series Sprinklers Available with Solid, Perforated, or Gasket Standard Coverage, Concealed Pendent K2.8, 4.2, 5.6, & 8.0 (40, 60, 80, & 115 metric) Features Flat concealed cover plate available solid
TECHNICAL DATA. Table Standard Materials
Page 1 of 9 1. GENERAL DESCRIPTION The In-Line Balanced Pressure (ILBP) Proportioner is a foam proportioning device which is used to balance the higher foam concentrate pressure to the lower system water
Carbon or stainless Steel
For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 6 FLEXIBLE HOSES TYPE FSH SERIES METALLIC
Grooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
I-VICFLEX.AB11. Victaulic VicFlex Style AB11 Low-Profile Sprinkler Fitting for Suspended Ceiling Systems WARNING INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS I-VICFLEX.AB11 Victaulic VicFlex Style AB11 Low-Profile Sprinkler Fitting for Suspended Ceiling Systems Read and understand all instructions before attempting to install any Victaulic
Model RM-1 Riser Manifold Commercial and Residential General Description
Worldwide Contacts www.tyco-fire.com Model RM- Riser Manifold Commercial and Residential General Description The TYCO commercial and residential Model RM- Riser Manifold provide the necessary waterflow
Technical Data. Sizes 2 12 Inch (DN50 DN300)
Worldwide Contacts www.tyco-fire.com Model BFV-/BFV-C Butterfly Valve Grooved End General Description The TYCO Models BFV- and BFV- C Grooved End Butterfly Valves are indicating type valves designed for
Worldwide Contacts. Technical Data
Worldwide Contacts www.tyco-fire.com Model BFV-/BFV-C Butterfly Valve Grooved End General Description The TYCO Models BFV- and BFV- C Grooved End Butterfly Valves are indicating type valves designed for
I-VICFLEX.AB5. Victaulic VicFlex Style AB5 Sprinkler Fitting for Wood or Metal Joists/Studs and CD Profile (60 mm) Channel Ceiling Systems WARNING
INSTALLATION INSTRUCTIONS I-VICFLEX.AB5 Victaulic VicFlex Style AB5 Sprinkler Fitting for Wood or Metal Joists/Studs and CD Profile ( mm) Channel Ceiling Systems WARNING Read and understand all instructions
Maximum Motor Power 0.25 hp 0.19 kw Torque Range ft. lbs Nm. Torque Range ft. lbs Nm Non-Reversible
21MF-900/910 Series 21MR-910 Series 0.3 hp 0.22 kw 0.25 hp 0.19 kw 0.24 11.3 ft. lbs. 0.3 15.3 Nm 1.2 10.0 ft. lbs. 1.6 13.6 Nm Threaded or Keyed Spindle 21MF-900 21MR-911 Code 0, 1, 2 & 3 5.69 Code 4
TECHNICAL DATA OBSOLETE
April 4, 2008 32a 1. DESCRIPTION Viking EasyPac Floor Control Riser Manifold Assemblies are available in sizes 1-1/4, 1-1/2, 2, and 2-1/2 for commercial use, in high rise buidlings requiring floor control
Installation Instructions
Installation Instructions ROMAN TUB 3 VALVE LONG STEM AND TRIM Valve Body No. 1-548 Trim Kit for Model No s: 3-1687 Congratulations on the purchase of this Newport Brass product, an excellent choice, that
Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data
Worldwide Contacts www.tyco-fire.com Model CV-FR Grooved-End Riser Check Valves Inch to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Grooved- End Riser Check Valve is a compact and rugged
IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Installation Instructions
Installation Instructions ROMAN TUB 3 VALVE LONG STEM AND TRIM Valve Body No. 1-666 and 1-76 Trim Kit for Model No s: 3-577 3-067 3-997 3-917 3-57 3-047 3-567 3-907 3-4 3-537 3-4 Hand Shower Congratulations
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
Fire Protection Price List
Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully
Industrial Hose & Couplings METALLIC HOSE ASSEMBLIES
Industrial Hose & Couplings METALLIC HOSE ASSEMBLIES PRODUCT INDE The improved Stainless Steel Annular Hose from Tubest is now manufactured to the newly introduced European ISO3 Standard. This has been
Flexible Sprinkler Connections
SuperFlex is the ultimate solution in flexible fire sprinkler drops. No need to measure or count the number of bends, no leaks, no worries! SuperFlex provides all the flexibility needed for an error free
INSTALLATION & MAINTENANCE GUIDE
BUTTERFLY VALVES INSTALLATION & MAINTENANCE GUIDE L-1 GLOBE BUTTERFLY VALVE INSTALLATION AND MAINTENANCE GUIDE Table of Contents Page Design Requirements and Installation Care and Maintenance GL175T GL175G
4077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE FAX
Butterfly Valves 4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 FAX 989-846-9231 www.globesprinkler.com FEBRUARY 2010 L-1 BULLETIN BUTTERFLY REV# 4 GLOBE BUTTERFLY VALVE INSTALLATION AND
TECHNICAL DATA. Q= C v P Cv = Flow Factor (GPM/1 PSI P)
1 of 9 1. DESCRIPTION The Viking 2 (DN50) is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction sprinkler
Installation Instructions
Installation Instructions ROMAN TUB 3 VALVE LONG STEM AND TRIM Valve Body No. 1-678 & 1-698 Trim Kit for Model No s: 3-3127 3-2497 3-3107 3-2487 Congratulations on the purchase of this Newport Brass product,
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
TECHNICAL DATA. Inlet Type Outlet Type OBSOLETE 6 (DN150)
January 13, 2006 Deluge Valves 211 a 1. PRODUCT NAME Viking Model E-1 Deluge Valve 3 (DN80) Available since 1985 4 (DN100) Available since 1985 6 (DN150) Available since 1984 2. MANUFACTURER THE VIKING
I-VICFLEX.AB1/AB2/AB10
INSTALLATION INSTRUCTIONS I-VICFLEX.AB1/AB/AB10 Victaulic VicFlex Flexible Hose with Fittings for Fire Protection Service Styles AB1, AB, and AB10 Brackets Flexible Hose Listing and Approval Information
GROUP E EXPLODED VIEW: EV FUEL SYSTEM 2.4L G2 DRAWING #: 0G1151 ITEM PART# QTY. DESCRIPTION
EXPLODED VIEW: EV FUEL SYSTEM 2.4L G2 DRAWING #: 0G1151 GROUP E ITEM PART# QTY. DESCRIPTION 1 026915 2 NIPPLE CLOSE 3/4 X 1.375 2 075580 1 FLANGE FUEL INLET 3 0F6390C 1 REGULATOR ASSY 2.4L (25KW) 0F6390B
High pressure centrifugal pumps
Series description H[ft] 5 5 4 8 Wilo-Multivert-MVIS 6 Hz - North America Q[m³/h] H[m] 5 4 MVIS 5 MVIS MVIS 5 5 4 6Q[US g.p.m.] 8 6 Pump series Wilo-Multivert MVIS 5..,.., 5.. Design Non-self priming multistage
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
11.02 Mechanical-T Bolted Branch Outlets
STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive
PRESS-FIT SYSTEM FOR SPRINKLER CONNECT WITH CONFIDENCE
PRESS-FIT SYSTEM FOR SPRINKLER CONNECT WITH CONFIDENCE CONNECT WITH CONFIDENCE With a wealth of expertise and the broadest range of solutions and systems on the market, Pegler Yorkshire s Connect products
Horizontal Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Horizontal Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
Transmission Pressures - Test and Adjust
Testing and Adjusting 938G Wheel Loader and IT38G Integrated Toolcarrier Power Train Transmission Pressures - Test and Adjust NOTICE Care must be taken to ensure that fluids are contained during performance
Medical Gas Outlet Adaptor, Fitting and Hose Catalog
2018 Medical Gas Outlet Adaptor, Fitting and Hose Catalog For Clinical Engineering, Biomedical, and Respiratory, Departments 11300 Sanders Drive, Suite 1 Rancho Cordova, CA 95742 (916) 853-1222 Fax (916)
TECHNICAL DATA. Trimpac 249a. September 16, 2013
September 16, 2013 Trimpac 249a 1. DESCrIpTION DESCRIPTION TRIMPAC Model B-4, B-4B & B-4S is a factory assembled trim package for a single interlocked with a pneumatic release module in a metal enclosure.
Vertical Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Vertical Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
Foam Ratio Controller Proportioning Devices Model KFP
1 General description The KCA ratio controller accurately proportions foam concentrate into a water stream over a wide range of water flow rates. The controller proportions foam at concentrations of 1%
Q= C. v P S Refer to Table 1 for part numbers and shipping weights. Accessories: Table 1: Valve Part Numbers and Specifications
1 of 9 1. DESCRIPTION The Viking Flow Control Valve is a quick opening, differential diaphragm flood valve with a spring loaded floating clapper. The Flow Control Valve can be used to facilitate manual
Modified polyolefin (-CR) or fluoropolymer (-CT) outer jacket
SELF-REGULATING HEATING CABLE For pipe freeze protection and flow maintenance Heating cable construction Tinned-copper braid Modified polyolefin (-CR) or fluoropolymer (-CT) outer jacket Modified polyolefin
TECHNICAL DATA. Trimpac 244a. April 15, 2011
April 15, 2011 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally required
model E Spray nozzles vk810 - vk817
Page 1 of 10 1. DESCRIPTION Viking Model E, 3D Spray Nozzles are open type spray nozzles designed for directional spray applications in fixed fire protection systems. They have an open design only (nonautomatic)
SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
THERMOSETTER Recirculation thermal balancing valve
THERMOSETTER Recirculation thermal balancing valve 116 series 01325/17 NA ACCREDITED Function ISO 9001 FM 21654 The THERMOSETTER adjustable thermal balancing valve is used for automatic balancing of recirculation
TECHNICAL DATA. Viking Technical Data may be found on Style: 90 Degree Pattern (inlet to outlet)
Flow Control 500a DESCRIPTION The Viking 1-1/2 is a quick opening, differential type flood valve with a spring loaded rolling diaphragm clapper. The can be used to facilitate manual or automatic on/off
TECHNICAL DATA TRIMPAC MODEL B-4, B-4B & B-4S SINGLE INTERLOCK PREACTION SYSTEM WITH PNEUMATIC RELEASE
Page 1 of 20 1. DESCRIPTION TRIMPAC Model B-4, B-4B & B-4S is a factory assembled trim package for a single interlocked preaction system with a pneumatic release module in a metal enclosure. The standard
Easy Riser swing check valve Models E-1 & F-1
Page 1 of 7 1. DESCRIPTION The Viking Easy Riser Swing Check Valve is a general purpose rubber-faced approved for use in fire service systems. The valve is for use in wet system risers, preaction system
Fire Protection Price List. Piping. Systems. Solutions A FP.
Piping. Systems. Solutions. Fire Protection Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully
VINCI-LED Wall/Area/Flood Lighting
Job Information Type: VINCI-LED Catalog #: Project: Comments: Prepared by: YEAR WARRANTY WARRANTY TEN INCLUDES LABOR ALLOWANCE Vinci Vinci Large 7⅞ ¼ ⅝ 9¾ ½ ⅛ Applications Wall/Surface Post/Bollard Low
ANGLE VALVES 300LB. RATED OPTIONAL FINISHES: PB- Polished Brass RC- Rough Chrome Plated PC- Polished Chrome Plated U/L LISTED NY BSA/MEA APPROVED
HOSE VALVES 5000 SERIES ANGLE VALVES 300LB. RATED NPT inlet and male hose thread outlet cast brass valve with wheel with wheel handle 5010-5015 PB- Polished Brass RC- Rough Chrome Plated PC- Polished Chrome
PRESSURE REGULATORS. 0.6, 0.8, 1.1, 1.4, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 * Outlet pressure in bar (M 3/H)
REGULATORS ACCURATE REGULATORS FOR ENSURING UNIFORM OVERVIEW Ensuring continuous non-peak, consistent pressure and maximum system uptime, our highly accurate pressure regulators are available in two models.
TECHNICAL DATA 1-1/2 (dn40)
July 1, 2011 Deluge Valves 209a DESCRIPTION The Viking Model E-3 1-1/2 Deluge Valve is a quick-opening, differential type flood valve with a rolling diaphragm clapper. The deluge valve is used to control
Wet pipe low flow foam/water manifold system
December 6, 2010 Foam 15a 1. Description With the Wet Pipe Low Flow Foam/Water Manifold System, multiple risers can be supplied from a single proportioning device. A riser manifold is installed with various
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME.
FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME. DATA SHEET INDEX 36m x 19mm FIRE HOSE REEL RISER INSTALLATION DETAIL
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
TECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Model F Dry Valve with Trim Valve Size Part Number 3 13764PTR 4 13765PTR 6 13766PTR Standard Trim Sets include galvanized nipples and fittings. 4 Dry Valve Shown General Notes: Notes: For use
TECHNICAL DATA OBSOLETE
August 31, 2006 Check Valve 815a 1. PRODUCT NAME Viking Easy Riser Swing Check Valve Model E-1: Available since 1992 Model F-1: Available since 1994 2. MANUFACTURER The Viking Corporation 210 N. Industrial
G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve
Product Bulletin Issue Date March 13, 2013 G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve The G196 Series valves use the reliable valve body and magnetic operators from
SEF Eyesaver Service Sink Faucet with Eyewash/Drench Hose EYEWASH FEATURES: FAUCET FEATURES: COMPLIANCE: OPTIONS: Add suffix to model #
SEF-9000 Eyesaver Service Sink Faucet with Eyewash/Drench Hose EYEWASH FEATURES: Eyewash is connected to Speakman SC-5811-RCP service sink faucet s cold water integral stop port supply 6 ft. stainless
Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available
Mark 33 Series Electric Motor Control Valves The Mark 33 is a motor operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20mA
TECHNICAL DATA CONCENTRATE CONTROL VALVE APPLICATIONS, PRIMING CONNECTIONS, AND TRIMS 1. GENERAL DESCRIPTION 2. LISTINGS AND APPROVALS.
Page 1 of Telephone: 29-95-9501 Technical Services: 877-38-5 Fax: 29-818-180 Email: techsvcs@vikingcorp.com 1. GENERAL DESCRIPTION The Halar Coated Concentrate Control (CCV) is utilized in Viking foam
Self-Regulating Parallel Heating Cables. innovations in heat tracing
Self-Regulating Parallel Heating Cables innovations in heat tracing ELSR Application Options The application options for the ELSR heating cables range from freeze protection to maintenance of pipes and
IGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
30.85 FireLock NXT Actuated Valve with LPCB Approved Preaction Trim
Actuated Valve with LPCB Approved Preaction Trim 104g/01 with: - Electric Activation with Redundant Solenoid Valve - Electric Activation with Redundant Solenoid Valve and AutoConvert Dry Trim - Double
2380N High pressure hose. Design Factor >2:1. CONSTRUCTION Core tube : Polyamide. Hoses with design factor >2:1 2380N
C 2380N 2380N High pressure hose CONSTRUCTION Core tube : Polyamide Pressure reinforcement : Two spiral layers and two open spiral layers of high tensile steel wire Cover : Polyurethane Standard colour
Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation
Deluge Valve DV-5 Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation GeneralDescription The Model DV-5 Deluge Valve (described in Technical
TECHNICAL DATA. Q= C v P S
1 of 9 1. DESCRIPTION The Viking Model E-1 Deluge Valve is a quick-opening, differential diaphragm, flood valve with one moving part. The deluge valve is used to control water flow in deluge and preaction
TECHNICAL DATA VK810 (65 ) VK811 (80 ) VK812 (95 ) VK813 (110 )
February 11, 2005 Spray Nozzle 32 a 1. PRODUCT NAME Viking Model E Spray Nozzles VK810 - VK817 65, 80, 95, 110, 125, 140, 160, and 180 Pattern 1.2, 1.8, 2.3, 3.2, 4.1, 5.6, 7.2 nominal U.S. K-Factors Available
Technical Information Cleanfit CPA451
TI00343C/07/EN/13.14 71266614 Products Solutions Services Technical Information Manually operated retractable assembly for water, wastewater and process media Application Industrial and communal waste
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple
Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler
60Hz HORIZONTAL MULTISTAGE PUMPS
6Hz HORIZONTAL MULTISTAGE PUMPS INDEX EH Stainless Steel Horizontal Multistage Pump................................................................ 2 General Product Curves..................................................................................
Installation Manual. Automated Fuel. Maintenance. System FUEL TECHNOLOGIES INTERNATIONAL LLC
Installation Manual Automated Fuel Maintenance System FTI-10A & FTI-20A FUEL TECHNOLOGIES INTERNATIONAL LLC Replacement Manuals Available on Website: www.fueltechnologiesinternational.com 03/01/2011 -
HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
FRAME STYLE SPRAY NOZZLES TECHNICAL DATA
Page 1 of 5 1. DESCRIPTION Viking Frame Style Spray Nozzles are small, directional spray nozzles for use on water spray systems. They are thermosensitive glass bulb style nozzles, however they may be ordered
Welded Outlet Fittings For Fire Protection & Other Low Pressure Piping Systems
Welded Fittings For Fire Protection & Other Low Pressure Piping Systems SPF Welded Fittings offer the user a high strength, low cost forged threaded and grooved line of fittings specifically designed and
B U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
TABLE OF CONTENTS. Ball Valves
bal lval ves TABLE OF CONTENTS Ball Valves High Pressure, 2 Way 3 High Pressure,3 Way 4 High Pressure, Handles 5 Locking Kit 5 Low Pressure, Brass & Stainless Steel 6 Mini 5 HIGH PRESSURE BALL VALVES -
TECHNICAL DATA OBSOLETE
April 13, 2007 Spray Nozzle 31a 1. DESCRIPTION Viking Frame Style Spray Nozzles are small, directional spray nozzles for use on water spray systems. They are thermosensitive glass bulb style nozzles, however
Chibro Press Fit Stainless Steel Pipe and Fittings. Data Sheet
Chibro Press Fit Stainless Steel Pipe and Fittings General Information Data Sheet The Chibro Press Fit Pipe system permits the installation of a metal piping system in a reliable and economic way. The
mirage standard and Qr concealed pendent sprinkler vk462 and hp sprinkler vk463 (K5.6)
Page 1 of 7 1. DESCRIPTION Viking Mirage Standard and Quick Response Concealed Pendent VK462 and HP VK463 are thermosensitive glass-bulb spray sprinklers designed for installation on concealed pipe systems
I-799/79V Coil Components
WARNING Read and understand all instructions before attempting to install any Victaulic products. Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic
Model DDX Deluge Valves 4" (100 mm), 6" (150 mm) and 165 mm Sizes
Features 1. Differential-type, lightweight, dependable construction. 2. Easily trimmed for releasing by: Manual pull stations Wet pilot sprinklers Dry pilot actuators Solenoid valves 3. Drop in seat &
Shut-off valves Types SVA-S and SVA-L
Data sheet Shut-off valves Types SVA-S and SVA-L SVA shut-off valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) The shut-off valves are designed
Model DDX Deluge Valve 8 (200mm) Features
Model DDX Deluge Valve 8 (200mm) Bulletin 514 Bulletin 514 Features 1. Differential Latch-type, lightweight, dependable construction. 2. Easily trimmed for releasing by: Manual pull stations Wet pilot
Hydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series