PRESSURE REGULATORS. 0.6, 0.8, 1.1, 1.4, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 * Outlet pressure in bar (M 3/H)
|
|
|
- Clara Beasley
- 6 years ago
- Views:
Transcription
1 REGULATORS ACCURATE REGULATORS FOR ENSURING UNIFORM OVERVIEW Ensuring continuous non-peak, consistent pressure and maximum system uptime, our highly accurate pressure regulators are available in two models. PRV : Located near the head control, this model is available at various outlet pressures. In-line PRV: Located at the dripperline, sprinkler or conduction/distribution pipe entry point, this model is suitable for low-flow rates that are most prevalent in sloped irrigation applications. 3 4 In-line 3 4 x 1 () 1½ x 2 () 2 x 4 () 2 x 6 () 3 x () Pressure regulators selection PRODUCT MODEL MIN. FLOW RATE (M 3/H) MAX. FLOW RATE (M 3/H) MAX. INLET (BAR) BODY MATERIAL In-line 0.05 Plastic, Black In-line PRV & PRV Plastic, Purple 3/4 (1 spring) Plastic, Black 1½ (2 springs) Plastic, Black 2 (4 springs) Bronze 2 (6 springs) Bronze 3 ( springs) Bronze 3/4 In-line PRV (Low Flow) 3/4 In-line PRV (Acid Resistant) UNITS FOR SERIES SELECTION 0.6, 0.8, 1.1, 1.4, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 * Outlet pressure in bar
2 PRV SERIES OUTLET VS. FLOW RATE Outlet pressure (bar) Head Outlet pressure (bar) Head loss loss (bar) Outlet pressure (bar) (bar) Outlet pressure (bar) Flow rate (l/h) REGULATORS (HEAD LOSS VS. FLOW RATE) ¾ - 1 unit 1½ - 2 units 2-4 units Flow rate (m³/h) units IN-LINE PRV OUTLET VS. FLOW RATE 3.0 bar P.R.V. 4.5 bar inlet pressure 2.5 bar P.R.V. 4.0 bar inlet pressure 1.8 bar P.R.V. 3.5 bar inlet pressure 1.4 bar P.R.V. 3.0 bar inlet pressure 1.1 bar P.R.V. 2.0 bar inlet pressure Head loss (bar) Example: flow rate output pressure Given flow rate = 14.0 m³/h Required output pressure = 1.4 bar Calculation: Selected product = PRV 2 x 6 springs. Head loss across the PRV unit at 14.0 m³/h = 0.12 bar (graph 2) Flow rate per spring = 14:6 = 2.3 m³/h. Selected spring 1.4 = output pressure at 2.3 m³/h is 1.4 bar (graph 1) Total minimum required inlet pressure = (0.2 bar is constant addition to move the piston out) = 1.72 bar Spring pressure regulator valve = > head loss + actual output pressure bar = minimum required inlet pressure X (HEAD LOSS VS. FLOW RATE) Flow Flow rate rate (m³/h) (m 3 /h) In-Line PRV Low Flow pressure regulator Plastic body, corrosion resistant Stainless steel spring Min. flow rate 50 l/h, max. flow rate 00 l/h Inlet and outlet connector 3 4 female Max. inlet pressure: bar Spring for drip irrigation: 1.1, 1.4 and 1.8 bar Spring for sprinklers: 2.5 and 3.0 bar with 1/2" female threaded at the outlet Flow Flow rate rate (l/h) (l/h)
3 IN-LINE PRV 3/4" LOGISTIC INFORMATION INLINE P.R.V. 3/4" 1.1 BAR 15 PSI / / 15 / INLINE P.R.V. 3/4" 1.4 BAR 20 PSI / / 20 / INLINE P.R.V. 3/4" 1.8 BAR 25 PSI / / 25 / INLINE P.R.V. 3/4" 2.5 BAR 35 PSI / / 35 / INLINE P.R.V. 3/4"*1/2" 3.0 BAR 43 PSI / / 35 / INLINE P.R.V. 3/4" 3.0 BAR 43 PSI / / 43 / INLINE P.R.V. 3/4"*1/2" / / 43 / INLINE P.R.V. 3/4"*1/2" 2.5 BAR 35 PSI / / 35 / IN-LINE PRV 3/4" FOR MINING INLINE P.R.V. 3/4" 1.1 BAR 15 PSI MINING / / 15 4 / INL. P.R.V. 3/4" 1.1 BAR 15PSI MIN VITON / / 15 4 / INLINE P.R.V. 3/4" 1.4 BAR 20 PSI MINING / / 20 4 / INLINE P.R.V. 3/4" 1.8 BAR 25 PSI MINING / / 25 4 / INLINE P.R.V. 3/4" 2.5 BAR 35 PSI MINING / / 35 4 / INLINE P.R.V. 3/4" 3.0 BAR 43 PSI MINING / / 43 4 / INLINE P.R.V. 3/4"*1/2" 1.1 BAR MINING / / 15 4 / INLINE P.R.V. 3/4"*1/2" 1.4 BAR MINING / / 20 4 / INLINE P.R.V. 3/4"*1/2" 1.8 BAR MINING / / 25 4 / INLINE P.R.V. 3/4"*1/2" 2.5 BAR MINING / / 35 4 / 60 1 PRV 3/4" P.R.V. 3/4" 0.6 BAR 9 PSI 0/8-4.5 / / 9 / P.R.V. 3/4" 0.8 BAR 12 PSI 0/8-4.5 / / 12 / P.R.V. 3/4" 1.1 BAR 15 PSI 0/8-4.5 / / 15 / P.R.V. 3/4" 1.4 BAR 20 PSI 0/8-4.5 / / 20 / P.R.V. 3/4" 1.8 BAR 25 PSI 0/8-4.5 / / 25 / P.R.V. 3/4" 2.0 BAR 30 PSI 0/8-4.5 / / 30 / P.R.V. 3/4" 2.5 BAR 35 PSI 0/8-4.5 / / 35 / P.R.V. 3/4" 3.0 BAR 43 PSI 0/8-4.5 / / 43 / P.R.V. 3/4" 3.5 BAR 50 PSI 0/8-4.5 / / 50 / P.R.V. 3/4" 4.0 BAR 57 PSI 0/8-4.5 / / 57 / P.R.V. 3/4" 4.5 BAR 65 PSI 0/8-4.5 / / 65 / 145 1
4 PRV 1.5" 2 UNITS P.R.V. 1.5" 0.6 BAR 9 PSI 2U / / 9 / P.R.V. 1.5" 0.8 BAR 12 PSI 2U / / 12 / P.R.V. 1.5" 1.1 BAR 15 PSI 2U / / 15 / P.R.V. 1.5" 1.4 BAR 20 PSI 2U / / 20 / P.R.V. 1.5" 1.8 BAR 25 PSI 2U / / 25 / P.R.V. 1.5" 2.0 BAR 30 PSI 2U / / 30 / P.R.V. 1.5" 2.5 BAR 35 PSI 2U / / 35 / P.R.V. 1.5" 3.0 BAR 43 PSI 2U / / 43 / P.R.V. 1.5" 3.5 BAR 50 PSI 2U / / 50 / P.R.V. 1.5" 4.0 BAR 57 PSI 2U / / 57 / P.R.V. 1.5" 4.5 BAR 65 PSI 2U / / 65 / PRV 2" 4 UNITS P.R.V. 2" BSP 0.6 BAR 9 PSI 4U / / 9 / P.R.V. 2" BSP 0.8 BAR 12 PSI 4U / / 12 / P.R.V. 2" BSP 1.1 BAR 15 PSI 4U / / 15 / P.R.V. 2" BSP 1.4 BAR 20 PSI 4U / / 20 / P.R.V. 2" BSP 1.8 BAR 25 PSI 4U / / 25 / P.R.V. 2" BSP 2.0 BAR 30 PSI 4U / / 30 / P.R.V. 2" BSP 2.5 BAR 35 PSI 4U / / 35 / P.R.V. 2" BSP 3.0 BAR 43 PSI 4U / / 43 / P.R.V. 2" BSP 3.5 BAR 50 PSI 4U / / 50 / P.R.V. 2" BSP 4.0 BAR 57 PSI 4U / / 57 / P.R.V. 2" BSP 4.5 BAR 65 PSI 4U / / 65 / P.R.V. 2" NPT 0.6 BAR 9 PSI 4U / / 9 / P.R.V. 2" NPT 0.8 BAR 12 PSI 4U / / 12 / P.R.V. 2" NPT 1.1 BAR 15 PSI 4U / / 15 / P.R.V. 2" NPT 1.4 BAR 20 PSI 4U / / 20 / P.R.V. 2" NPT 1.8 BAR 25 PSI 4U / / 25 / P.R.V. 2" NPT 2.0 BAR 30 PSI 4U / / 30 / P.R.V. 2" NPT 2.5 BAR 35 PSI 4U / / 35 / P.R.V. 2" NPT 3.0 BAR 43 PSI 4U / / 43 / P.R.V. 2" NPT 3.5 BAR 50 PSI 4U / / 50 / P.R.V. 2" NPT 4.0 BAR 57 PSI 4U / / 57 / P.R.V. 2" NPT 4.5 BAR 65 PSI 4U / / 65 / 145 4
5 PRV 2" 6 UNITS P.R.V. 2" BSP 0.6 BAR 9 PSI 6U / / 9 / P.R.V. 2" BSP 0.8 BAR 12 PSI 6U / / 12 / P.R.V. 2" BSP 1.1 BAR 15 PSI 6U / / 15 / P.R.V. 2" BSP 1.4 BAR 20 PSI 6U / / 20 / P.R.V. 2" BSP 1.8 BAR 25 PSI 6U / / 25 / P.R.V. 2" BSP 2.0 BAR 30 PSI 6U / / 30 / P.R.V. 2" BSP 2.5 BAR 35 PSI 6U / / 35 / P.R.V. 2" BSP 3.0 BAR 43 PSI 6U / / 43 / P.R.V. 2" BSP 3.5 BAR 50 PSI 6U / / 50 / P.R.V. 2" BSP 4.0 BAR 57 PSI 6U / / 57 / P.R.V. 2" BSP 4.5 BAR 65 PSI 6U / / 65 / P.R.V. 2" NPT 0.6 BAR 9 PSI 6U / / 9 / P.R.V. 2" NPT 0.8 BAR 12 PSI 6U / / 12 / P.R.V. 2" NPT 1.1 BAR 15 PSI 6U / / 15 / P.R.V. 2" NPT 1.4 BAR 20 PSI 6U / / 20 / P.R.V. 2" NPT 1.8 BAR 25 PSI 6U / / 25 / P.R.V. 2" NPT 2.0 BAR 30 PSI 6U / / 30 / P.R.V. 2" NPT 2.5 BAR 35 PSI 6U / / 35 / P.R.V. 2" NPT 3.0 BAR 43 PSI 6U / / 43 / P.R.V. 2" NPT 3.5 BAR 50 PSI 6U / / 50 / P.R.V. 2" NPT 4.0 BAR 57 PSI 6U / / 57 / P.R.V. 2" NPT 4.5 BAR 65 PSI 6U / / 65 / PRV 3" units P.R.V. 3" BSP 0.6 BAR 9 PSI U 8-45 / / 9 / P.R.V. 3" BSP 0.8 BAR 12 PSI U 8-45 / / 12 / P.R.V. 3" BSP 1.1 BAR 15 PSI U 8-45 / / 15 / P.R.V. 3" BSP 1.4 BAR 20 PSI U 8-45 / / 20 / P.R.V. 3" BSP 1.8 BAR 25 PSI U 8-45 / / 25 / P.R.V. 3" BSP 2.0 BAR 30 PSI U 8-45 / / 30 / P.R.V. 3" BSP 2.5 BAR 35 PSI U 8-45 / / 35 / P.R.V. 3" BSP 3.0 BAR 43 PSI U 8-45 / / 43 / P.R.V. 3" BSP 3.5 BAR 50 PSI U 8-45 / / 50 / P.R.V. 3" BSP 4.0 BAR 57 PSI U 8-45 / / 57 / P.R.V. 3" BSP 4.5 BAR 65 PSI U 8-45 / / 65 / P.R.V. 3" NPT 0.6 BAR 9 PSI U 8-45 / / 9 / P.R.V. 3" NPT 0.8 BAR 12 PSI U 8-45 / / 12 / P.R.V. 3" NPT 1.1 BAR 15 PSI U 8-45 / / 15 / P.R.V. 3" NPT 1.4 BAR 20 PSI U 8-45 / / 20 / P.R.V. 3" NPT 1.8 BAR 25 PSI U 8-45 / / 25 / P.R.V. 3" NPT 2.0 BAR 30 PSI U 8-45 / / 30 / P.R.V. 3" NPT 2.5 BAR 35 PSI U 8-45 / / 35 / P.R.V. 3" NPT 3.0 BAR 43 PSI U 8-45 / / 43 / P.R.V. 3" NPT 3.5 BAR 50 PSI U 8-45 / / 50 / P.R.V. 3" NPT 4.0 BAR 57 PSI U 8-45 / / 57 / P.R.V. 3" NPT 4.5 BAR 65 PSI U 8-45 / / 65 / 145
6 SPARE PARTS FOR PRV CATALOG NO. DESCRIPTION UNIT 0.6 BAR 9 PSI UNIT 0.8 BAR 12 PSI UNIT 1.1 BAR 15 PSI UNIT 1.4 BAR 20 PSI UNIT 1.8 BAR 25 PSI UNIT 2.0 BAR 30 PSI UNIT 2.5 BAR 35 PSI UNIT 3.0 BAR 43 PSI UNIT 3.5 BAR 50 PSI UNIT 4.0 BAR 57 PSI UNIT 4.5 BAR 65 PSI P.R.V. 3/4""-BODY REPLACEMENT KIT P.R.V. 1.5""-BODY REPLACEMENT KIT P.R.V. 2" 4U BSP-B.REPLACEMENT KIT P.R.V. 2" 4U NPT-B.REPLACEMENT KIT P.R.V. 2" 6U BSP-B.REPLACEMENT KIT P.R.V. 2" 6U NPT-B.REPLACEMENT KIT PRV 2" 6U NPT-B.REPLCMNT KIT 5/CASE P.R.V. 3" U BSP-B.REPLACEMENT KIT P.R.V. 3" U NPT-B.REPLACEMENT KIT CMP-PS-0068-EN
PIPES PRODUCT CATALOG 2018 V1.6
PIPES PRODUCT CATALOG 2018 V1.6 Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. US7886775, US8220838 and other U.S. patents pending or corresponding issued
DWS 41. Installation Data 44 Performance Specs DWS & DW-PRV Series
IRRIGATION Title Description Details Page Intro 3 2000 Series 4 Model 2000 Solenoid 1 3 12 Model 2000 Solenoid 4 8 15 Model 2030 Low Power Solenoid 1 3 17 Model 2030 Low Power Solenoid 4 8 19 Model 2160
2000 Series Heavy-Duty Irrigation Valves Recommended Applications Golf Courses Landscapes Parks Right-of-ways
2000 Series Heavy-Duty Irrigation Valves Recommended Applications Golf Courses Landscapes Parks Right-of-ways Absolute Control. Optimized Efficiency. Features and Installation Self-cleaning: No filters
UniWine Pressure-compensating, Continuously Self-cleaning Dripper
Applications Sub-surface and on-surface installation Drip irrigation technology comprises the following features: Solid set system: each vine has its own individual drippers always ready for operation.
IRRIGATION IMPACT SPRINKLERS CATALOGUE 2012
IRRIGATION IMPACT SPRINKLERS CATALOGUE 2012 Tel Aviv-Jaffa, Israel E-mail: argos@argosinvest.net Website: www.argosinvest.net AR044 :: PERFORMANCE DATA full circle, plastic impact sprinkler, 1/2" male
NETAFIM FLEXIBLE PIPES FLEXNET HP INNOVATIVE MAINLINE AND SUB-MAINLINE PIPING SOLUTIONS THAT ARE EASY TO INSTALL, RECOIL AND RELOCATE
NETAFIM FLEXIBLE PIPES INNOVATIVE MAINLINE AND SUB-MAINLINE PIPING SOLUTIONS THAT ARE EASY TO INSTALL, RECOIL AND RELOCATE APPLICATIONS For seasonal crop: Sub main for all drip irrigation and sprinkler
See Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. Water pressure reducing valves PR (36LF) Series Residential and commercial applications The Apollo 36LF pressure
MixRite TF 10 Fertilizer and Chemicals Injector
MixRite TF 10 MixRite TF 10 Fertilizer and Chemicals Injector Congratulations on your purchase of one of our high quality products. To get the best results from the MixRite TF-10 Proportioning Dosing Injector
See Water Pressure Reducing Valves Catalog (PHBRWPRV) for more detailed information about the products in this section.
See Catalog (PHBRWPRV) for more detailed information about the products in this section. WATER PRESSURE REDUCING VALVES PR (36LF) SERIES RESIDENTIAL AND COMMERCIAL APPLICATIONS The Apollo 36LF pressure
Streamline Applications: Specifications: Features and Benefits: Integral dripper
Streamline Integral dripper 12060-12080 - 16060-16080 16100-16125 - 22080-22100 Applications: Row crops irrigation Specifications: Recommended filtration: 130 micron / 120 mesh TurboNet labyrinth with
Pressure-compensating, Continuously Self-cleaning Dripper. Techline CV 16 mm
Sub- and On-surface dripperline with 0.14 bar Check Valve anti-drain (CV) system for efficient pulse irrigation, prevents water draining and eliminates need for refill. Check valve, anti drain mechanism
Pressure-compensating, Continuously Self-cleaning Dripper. Techline CV 17 mm
Sub- and On-surface dripperline with 0.14 bar Check Valve anti-drain (CV) system for efficient pulse irrigation, prevents water draining and eliminates need for refill. Check valve, anti drain mechanism
House Hydrant V1 FROST-FREE OUTDOOR WALL HYDRANT. aqu r FLUSH-MOUNT NON-FREEZE SELF-DRAINING.
House Hydrant V1 FROST-FREE OUTDOOR WALL HYDRANT FLUSH-MOUNT NON-FREEZE SELF-DRAINING www.aquorwatersystems.com Overview and Feature List HOUSE HYDRANT V1 - IN-WALL OUTDOOR FAUCET SYSTEM Flush-mounted
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
House Hydrant V2 FROST-FREE OUTDOOR WALL HYDRANT. aqu r FLUSH-MOUNT NON-FREEZE SELF-DRAINING ANTI-SIPHON.
House Hydrant V2 FROST-FREE OUTDOOR WALL HYDRANT FLUSH-MOUNT NON-FREEZE SELF-DRAINING ANTI-SIPHON www.aquorwatersystems.com Overview and Feature List HOUSE HYDRANT V2 - IN-WALL OUTDOOR FAUCET SYSTEM Flush-mounted
800 Series Control Valves
AGRICULTURE 800 Series Control s VALVE SELECTION GUIDE ENVIRONMENTAL GREEN INDUSTRY nelsonirrigation.com 1 Control s As a hydraulically operated sleeve-type valve, the 800 Series Control is designed for
AGRICULTURE HORTICULTURE GREENHOUSE
AGRICULTURE HORTICULTURE GREENHOUSE TM TM TM Fertilizer ( Injectors A step up from & Chemical injectors are water driven only, with no other energy required Application Fertigation Water Treatment Supplementation
Aries Technical Information. Features and Benefits. Integral dripper
Aries Integral dripper 12010-16009 - 16010-16012 - 20010-20012 Technical Information Deciduous and tree irrigation. On-surface multi seasonal row crops. Specifications Maximum system pressure: according
AGRICULTURE HORTICULTURE GREENHOUSE
AGRICULTURE HORTICULTURE GREENHOUSE TM TM TM Fertilizer ( Injectors A step up from & Chemical injectors are water driven only, with no other energy required Application Fertigation Water Treatment Supplementation
HPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
Series PRV-71H Pressure Reducing Valve Operation and Maintenance Manual
Series PRV-71H Pressure Reducing Valve Operation and Maintenance Manual All Hydro Instruments Chemical Feed systems are carefully designed and tested for years of safe, accurate field service. All Hydro
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
P.O.Box 151, Or-Akiva 30600, ISRAEL. Phone: ,3. Fax: PRODUCTS CATALOG Catalog Number.
Rain-Tal Ltd Advanced Irrigation / Filtration Technologies P.O.Box 151, Or-Akiva 30600, ISRAEL. Phone: 972 4-6101811,3. Fax: 972 4-6101814 PRODUCTS CATALOG 2018 Vibro-Spreaders, Color code by Flow Discharge
CPI offers the DropsA SMX product line as an affordable performance product featuring:
SMX Divider Blocks PRODUCT DESCRIPTION Divider blocks (also known as distribution blocks or divider valves) provided by CPI, precisely distribute correct lubrication, reducing the size of lubricator boxes
Hydraulic Concentrate Control Valve
Hydraulic Concentrate Control Valve DESCRIPTION The standard hydraulic actuated valve assembly consists of a factory assembled and tested quarter turn regular port ball valve to which a hydraulic actuator
Solenoid valve VDHT standard BSP (British Standard Pipe)
Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General
MixRite TF 5 Fertilizer and Chemicals Injector
MixRite TF-5 MixRite TF 5 Fertilizer and Chemicals Injector Congratulations on your purchase of one of our high quality products. To get the best results from the MixRite TF-5 Proportioning Dosing Injector
Schedule 40 Fittings & Accessories Turf Swivel Joints
Turf Swivel Joints Turf Swivel Joints, Compact Turf Swivel Joints and Turf Swivel Joint Kits are designed for open discharge systems and are not to be used with valve-in-head sprinklers or quick coupler
CXL2 Injectors & Manifolds
CXL2 Injectors & Manifolds Premium Single Line Grease Systems General Designed for use in single line high pressure automatic grease systems, CXL2 Injectors deliver precise volumes of lubricant at predetermined
UniTechline AS 17 mm. Sub- and On-surface dripperline for Slopes High wind Roof gardens Curved, narrow and unshaped areas
Sub- and On-surface dripperline for Slopes High wind Roof gardens Curved, narrow and unshaped areas Anti-Siphon mechanism Integral dripper 1 www.netafim.com Applications Sub-surface and on-surface installation
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel)
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel) DESCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
TechNet mm. On-surface installation or covered with a layer of mulch High wind Planting areas Roof gardens Curved, narrow and unshaped areas
On-surface installation or covered with a layer of mulch High wind Planting areas Roof gardens Curved, narrow and unshaped areas Exploded view of TechNet integral dripper 1 www.netafim.com Applications
Super Spray. com. www. Mechanized irrigation
Super Spray Mechanized irrigation Field proven technology - Introduced in 1979. The Super Spray offers a wide variety of deflector pads to customize angle and droplet size. easy clean nozzle NEW! Senninger's
Super Spray. com. www. Mechanized irrigation
Super Spray Mechanized irrigation Field proven technology - Introduced in 979. The Super Spray offers a wide variety of deflector pads to customize angle and droplet size. Super Spray UP3 Easy Clean NEW!
JRPH/JRPL Series. Pressure Reducing Valves. a division of Jordan Valve PRESSURE REDUCING VALVE JRPH & JRPL SERIES FLOW CONFIGURATIONS
a division of Jordan Valve JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVE The LowFlow JRPH Series and JRPL Series are piston operated, balanced trim pressure regulators with high Cv's
systems europe Twist II Clean Filters Product Catalogue
systems europe Twist II Clean Filters Product Catalogue Inline Water Filters A common problem with most filters is the time and mess of cleaning the filter element, during which the element can be damaged,
UniTechline AS 16 mm. Continuously Self-cleaning Dripper Anti-Siphon Mechanism
UniTechline AS 16 mm Pressure-compensating, Continuously Self-cleaning Dripper Applications Sub-surface and on-surface installation Slopes High wind areas Areas subject to vandalism Planting areas Curved,
3504 Series 5000 Series 8005 Series Falcon 6504
Introduction Spray Bodies Spray Nozzles Valves Controllers Central Controls Landscape Drip Pumps & Filtration Drainage Products Resources Major Products Water Saving Tips Rain Curtain nozzle technology
ULTRA ACV RATIO REDUCING VALVES PATENT NUMBER: 2016/04949
ULTRA ACV RATIO REDUCING VALVES PATENT NUMBER: 2016/04949 T O T A L V A L V E S O L U T I O N S ULTRA ACV RATIO PRESSURE REDUCING VALVE (RPRV) Ratio Pressure Reducing valves have been in use in the Mining
Special Kv available. Classification according pressure equipment Directive, 2014/68/UE
SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being
Accessories. Fittings 2. Products assembly 4. Tube Spike 3/5 mm 8 T.N.L. 9. Vacuum Breaker 10. Line Flush Valve 11. Pressure Indicator 12
Accessories For irrigation systems Version 1.0 Fittings 2 Products assembly 4 Tube Spike 3/5 mm 8 T.N.L. 9 Vacuum Breaker 10 Line Flush Valve 11 Pressure Indicator 12 Fittings Manifold 8 outlets To distribute
i-wob com www. MECHANIZED IRRIGATION
Established 1963 i-wob MECHANIZED IRRIGATION Senninger introduced Wobbler technology in 1978. Low application intensity, unmatched uniformity, large area of coverage at low pressure. i-wob UP3 TM Easy
POLYETHYLENE RIGID AND FLEXIBLE PIPES PRODUCT CATALOG
POLYETHYLENE RIGID AND FLEXIBLE PIPES PRODUCT CATALOG 2013 Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. 7048010, 7588201 and other U.S. patents pending
5022 SD - 1/2" Impact Sprinkler
Impact Sprinklers 5022 SD - 1/2" Impact Sprinkler Full Circle Impact- 25 trajectory 1/2" Male N.P.T. Single and Dual Bayonet s Plastic Bearing Plastic head and lever for strength, durability, and consistent
Twist & Dry. Twist & Dry Component System SPECIAL PURPOSE. Same day shipping for wear parts! Tungsten Carbide Options
Twist & Dry TO DER: specify pipe size, connection type, 108 Twist & Dry Component System The Twist & Dry series of nozzles was designed and developed for the spray drying industry, with the dryer operator
technet mm Pressure-compensating, Continuously Self-cleaning Dripper
technet 100 16 mm Pressure-compensating, Continuously Self-cleaning Dripper TechNet 100 16 mm Pressure-compensating, Continuously Self-cleaning Dripper Applications On-surface installation or covered with
Xi-Wob. com. www. SENNINGER. Established 1963
Established 1963 Xi-Wob MECHANIZED IRRIGATION Senninger introduced Wobbler technology in 1978. Low application intensity, unmatched uniformity, large area of coverage at low pressure. Xi-Wob UP3 Easy Clean
digital tap timer co1705 InstructIon Manual
digital Tap timer CO1705 Instruction Manual CO1705 Digital Tap Timer.indd 1 Table of Contents Technical Data... p1 Glossary... p Applications & Safety Instructions... p3 Connecting to the Tap & Operation
UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE -
UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE - Uni-Spray Nozzles... are injection molded from custom blended polypropylene, a cost effective material that is corrosion and heat resistant and is impervious
VALVES Raising the Standards of Reliability.
The Club at Admirals Cove Raising the Standards of Reliability. Rain Bird valves are expertly engineered and manufactured to provide a level of quality and durability that s unmatched in the industry.
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
J-Series High Pressure Regulators
J-Series High Pressure Regulators The LowFlow J-Series consists of the JR Series, which are pressure reducing valves, and the JB Series, which are back pressure regulating valves. The J-Series regulators
Diaphragm : Plastic Metal Globe : Plastic Metal Manifold Pinch Valve
Diaphragm : Plastic...................... 156 Metal...................... 158 Globe : Plastic...................... 160 Metal...................... 164 Manifold..................... 170 Pinch Valve.......................
Product Catalogue. Series 75 Valves. Valves. Catalogue. Series 75. Edition 09/2017
Series Valves Catalogue Edition 09/0 Product Catalogue Series Valves Series Valves Plastic Valves Series Dorot Series Series plastic valves are designed to control irrigation systems for crop fields, vineyards
Instruction Manual. Back Pressure Regulator (Low Shear ¾ ) Bar Pilot Control
Back Pressure Regulator (Low Shear ¾ ) 107757 15.0 Bar 107758 - Pilot Control Product Description This Product is designed for use with: BPR - 107757, 107758, 107748, 107749, 107750, 107754, 107755, PRV22,
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
VALVES. Rain Bird Valves are ruggedly reliable. and expertly engineered to provide an. elevated standard of product integrity that
Rain Bird Valves are ruggedly reliable and expertly engineered to provide an elevated standard of product integrity that is unmatched in the industry. Constructed of industrial-strength glass-filled nylon
FLO-GARD INLINE FLOW SWITCHES RCM. RCM s broad range of flow switches provide economical solutions for equipment protection and automation.
FLO-GRD INLINE FLOW SWITCHES s broad range of flow switches provide economical solutions for equipment protection and automation. ll FLO-GRD flow switches provide high reliability design with no paddles,
Super Gal. Super Gal. Model 75 - High Capacity Plastic Control Valve. Product Catalogue. Super Gal Catalogue. Model 75.
Super Gal Model 75 - High Capacity Plastic Control Valve Model 75 Super Gal Catalogue Product Catalogue Super Gal Back-Flushing Valves??? Areas Of Activity Dorot, part of Matholding Group since 2014, is
4 Series 298 Air Operated Stainless Steel Piston Valves For Steam and Aggressive Fluid Service
Series 98 Air Operated Steel Piston Valves For Steam and Aggressive Fluid Service Applications Rubber Vulcanization/Tire Presses Industrial Autoclaves Foundries Laundry Food & Beverage Chemical Processing
area
TIRAN Integral dripper 12010-16009 - 16010-16012 - 17012-20010 - 20012 Technical information Maximum system pressure: according to dripperlines wall thickness. Recommended filtration: 130 micron / 120
DatA sheet. D-2011/05/ Date: 02/2013. Type TSA2 CNG. Inline breakaway Coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA2 CNG Inline breakaway Coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. DATA sheet General Description Receptacle insert Eccentric actuator
Recommended Spare Parts and Supplies
Introduction O-1 Recommended Spare Parts and Supplies Major Assemblies Be sure to order the appropriate parts for your unit. To determine the features and options your unit has, refer to Explanation of
Mechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
QUALITY INDUSTRIAL FLOWMETERS
QUALITY INDUSTRIAL FLOWMETERS COMPANY PROFILE Trimec Industries is an Australian owned ISO9001:2008 quality certified company specializing in the design and manufacture of a proprietary range of positive
Data sheet. D-2011/05/ Date: 02/2013. Type TSA6 CNG. Inline breakaway Coupling. for bus and truck fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA6 CNG Inline breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Receptacle insert Eccentric actuator
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
3-way 1/2-2 Globe Valves
Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.
See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section.
See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section. water gauges 20-100 Series light Pattern Bronze Water Gauges LEAD FREE OPTION COMING SOON!
AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23
AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER 3+3 20 PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23 404 100 / 407 200 / 409 200 PUMPMASTER 3 & 3+3 PUMPMASTER 3, 55:1 PRESSURE RATIO
Continuous Run Vent Unloaders
Continuous Run Vent Unloaders Mark 2 Load Genie The LGM 20 - Mark II is a self-contained unloading valve, which can be used wherever a continuous run compressor is required. The compressor may need to
PRODUCT INFORMATION. PGV Valves. Rugged, Professional-Grade Valves Designed to Handle the Full Range of Landscape Needs L V E P
PRODUCT INFORMATION PGV Valves Rugged, Professional-Grade Valves Designed to Handle the Full Range of Landscape Needs G V V A L V E P S TABLE OF CONTENTS Product Overview... Features and Benefits... 4
Roller Pump Comparisons
Roller Pump Comparisons Get up to 10 times longer pump life with Hypro Silver Series XL Roller pumps! These three pump housings were photographed after being tested with a 30:1 mix of water and Roundup
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
FIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
M50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
Phone: Fax: Toll Free: PUMP ACCESSORIES
PUMP ACCESSORIES BALL CHECK VALVES Plainsman Ball Check Valves Reliable, field proven check valves. Metal to metal seats Simple design makes it easy to install and maintain, with only two moving parts
Solenoid valve VDHT standard BSP (British Standard Pipe)
Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General
PUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications Municipalities Sewage Systems
Porta-Matic 12V battery-powered portable pump AP5 Air-driven high-pressure pump SludgeMaster Air-driven high-flow pump DEWATERING PUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications
CAST IRON VALVES PRESSURE REDUCING VALVES SERIES
CAST IRON VALVES PRESSURE REDUCING VALVES SERIES NETAFIM CAST IRON VALVES PRESSURE REDUCING VALVES INLINE 0-600MM ANGLE 0-150MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged
Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
NON RETURN BRASS FLANGED AGA GAS APPROVED
NON RETURN BRASS FLANGED AGA GAS APPROVED ACTUATED MARINE STAINLESS STEEL 34 VALVES 36... BRASS BALL VALVES 37... AGA GAS APPROVED VALVES GATE VALVES 38... BRASS VALVES 39... RUBBER BELLOW, HOSECOCKS &
Kit Drain Water Tempering Kit
Kit 90092 - Drain Water Tempering Kit for Models DH2000 and MD2000 Kit Parts: Refer to the parts list below to ensure all the parts necessary for the installation are in your kit. Item Part Description
Commodity valves 24 / 26
Commodity valves Industrial valves - 24 / 26 ZA.VE.RO. INDUSTRIA VAVES 0 Art. 60 BA VAVE ONE PIECES BODY - FU AND REDUCED BORE 800-500 lbs 3000-6000 psi NPT - BSP - TREATED ENDS SOFT SEATED Za.Ve.Ro. API
General Equipment. Content - Section 9. 3/2 Valves. 5/2 Valves. 5/3 Valves. Visi Winks. Pressure Regulators. Non-Return Valves. Pilot Blocking Valves
9 General Equipment Content - Section 9 / 5/ 5/ Visi Winks Pressure Regulators Non-Return Pilot Blocking Trailer Park Valve Double Acting Cylinders Exhaust Filters Pressure Gauges Exhaust Guards Silencers
AIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
Foam Supply Kits FOAM EDUCTORS FOAM EDUCTORS FOAM EDUCTORS FOAM SUPPLY KITS
FOAM SUPPLY KITS Foam Supply Kits Elkhart offers two supply kits. Both kits include: One.75 quarter-turn, inlet valve assembly with elbow Quick-connect female coupling Quick-connect plug with chain Brushed
VYRSA SPRINKLERS (CONTINUED)
VYRSA SPRINKLERS (CONTINUED) VYRSA SPRINKLERS VYRSA 70 VYRSA 6001 (60) VYRSA 6610 (66) VYRSA 65 VYRSA 86 VYR 86 VYRSA 150 VYRSA 155 Sprinkler nozzle size conversion table Inch mm Inch mm Inch mm 1/16 1.6
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE
CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure
Features: Highly durable Increases productivity Longer service life
We are most eminent manufacturers of a wide range of Drip Irrigation Fittings, which are made up of high grade raw materials. Our technicians leverage advanced machinery in fabricating these fittings.
Foam Supply Kits FOAM EDUCTORS FOAM EDUCTORS FOAM EDUCTORS FOAM SUPPLY KITS
FOAM SUPPLY KITS Foam Supply Kits Elkhart offers two supply kits. Both kits include: One.75" quarter-turn, inlet valve assembly with elbow Quick-connect female coupling Quick-connect plug with chain Brushed
GEBCO (PTY) LTD - Netafim Product List - 1st March 2012 All Prices are stated exclusive of VAT & are subject to change without prior notice
AQUANET PLUS & ITEC CONTROLLERS Globe - Solenoid, Manual Override and Mechanical Throttle Aquanet Valve - AC 25 mm BSP Valve (Solenoid Valve) 34000-001100 Aquanet Valve - DC 25 mm BSP Valve (Solenoid Valve)
Direct-Operated Pressure & Temperature Regulating Valves
Direct-Operated & Temperature Regulating Valves Direct-Operated are used for controlling pressure or temperature in a variety of applications. Regulating Valves Page No. Cast Iron 3/8 2 Page No. O Series