5022 SD - 1/2" Impact Sprinkler

Transcription

1 Impact Sprinklers

2 5022 SD - 1/2" Impact Sprinkler Full Circle Impact- 25 trajectory 1/2" Male N.P.T. Single and Dual Bayonet s Plastic Bearing Plastic head and lever for strength, durability, and consistent performance High Impact, heavy duty plastic materials provide resistance to corrosion, chemicals, and UV radiation -coded bayonet nozzles for easy service -coded bearing sleeve: sleeve Low flow (5022-U) sleeve High flow (5022) Optional Flow Regulator (F.R.) Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet Irrigation and germination of vegetables, flowers and row crops 5022 SD Flow Specifications Number Flow Constants #12 x #9 Purple x Lt Green #14 x #9 Orange x Lt Green #15 x #9 x Lt Green #16 x #9 Green x Lt Green #18 x #9 Blue x Lt Green #20 x #9 x Lt Green # #16 Green #18 Blue # K x 2

3 Flow vs. Pressure Sleeve Sleeve #12 x #9 (3/32" x 9/128") (2.5mm x 1.8mm) Purple x Lt Green #15 (15/128", 3.0mm) #14 x #9 (7/64" x 9/128") (2.8mm x 1.8mm) Orange x Lt Green #16 (1/8", 3.2mm) Green #18 (9/64", 3.0mm) Blue #15 x #9 (15/128" x 9/128") (3.0mm x 1.8mm) x Lt Green #20 (5/32", 4.0mm) #16 x #9 (1/8" x 9/128") (3.2mm x 1.8mm) Green x Lt Green #18 x #9 (9/64" x 9/128") (3.0mm x 1.8mm) Blue x Lt Green #20 x #9 (5/32" x 9/128") (4.0mm x 1.8mm) x Lt Green as shown on Field Stand 3

4 5024 1/2" Impact Sprinkler Low Angle Impact Full Circle impact available with 9, 12, and 14 trajectory 1/2" Male N.P.T. Single Only Integrated stream-straightening vane for maximum range Optional Wedge Drive double bridge construction providing strength and protection Plastic head and lever for strength, durability, and consistent performance High Impact, heavy duty plastic materials provide resistance to corrosion, chemicals, and UV radiation -coded bayonet nozzles for easy service Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet Orchards, plantations and vineyards 4

5 Flow vs. Pressure #12 #14 #15 #16 #18 Pressure (psi) Flow Rate (gpm) Wetted Diameter (feet) Stream Height (inches)

6 5035 SD - 3/4" Impact Sprinkler Full and Part circle impact- 25 trajectory 3/4" Male N.P.T. Single and Dual bayonet constructed nozzles Integrated stream-straightening vane for maximum range Plastic head and lever for strength, durability, and consistent performance High Impact, heavy duty plastic materials provide resistance to corrosion, chemicals, and UV radiation -coded bayonet nozzles for easy service New rear nozzles for improved performances Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet General field use with solid-set irrigation systems 5035 SD Flow Specifications Flow Constants Number K x #18 x #12 Blue x Purple #20 x #12 x Purple #22 x #12 Brown x Purple #25 x #12 Purple x Purple #28 x #12 Orange x Purple #30 x #12 x Purple #18 Blue # #22 Brown #25 Purple #28 Orange #

7 5035 SD Dual Flow vs. Pressure 5035 SD Single Flow vs. Pressure Sleeve Sleeve #18 x #12 (9/64" x 3/32") (3.5mm x 2.5mm) Blue x Purple #20 x #12 (5/32" x 3/32") (4.0mm x 2.5mm) x Purple #22 x #12 (11/64" x 3/32") (4.5mm x 2.5mm) Brown x Purple #25 x #12 (25/128" x 3/32") (5.0mm x 2.5mm) Purple x Purple #28 x #12 (7/32" x 3/32") (5.5mm x 2.5mm) Orange x Purple #30 x #12 (15/64" x 3/32") (6.0mm x 2.5mm) x Purple #18 (9/64", 3.5mm) Blue #20 (5/32", 4.0mm) #22 (11/64", 4.5mm) Brown #25 (25/128", 5.0mm) Purple #28 (7/32", 5.5mm) Orange #30 (15/64", 6.0mm)

8 429 AG 1/2" Impact Sprinkler Full and Part circle impact- 26 trajectory 1/2" Male N.P.T. Single bayonet constructed nozzles Integrated stream-straightening vane for maximum range Plastic head and lever for strength, durability, and consistent performance High Impact, heavy duty plastic materials provide resistance to corrosion, chemicals, and UV radiation -coded bayonet nozzles for easy service Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet 429 Flow vs. Pressure Specifically designed for irrigation of field edges Pressure (psi) Flow Rate (gpm) Wetted Diameter (feet) Pressure (psi) Flow Rate (gpm) Wetted Diameter (feet) #14 (7/64", 2.8mm) Orange #18 (9/64", 3.6mm) Blue #15 (15/128", 3.0mm) #20 (5/32", 4.0mm) #16 (1/8", 3.2mm) Green

9 JI-1 1/2" Impact Sprinkler JI-1 Flow vs. Pressure #14 (7/64", 2.8mm) #16 (1/8", 3.2mm) #18 (9/64", 3.6mm) #20 (5/32", 4.0mm) #23 (23/128", 4.5 mm) Full circle impact 25 trajectory 1/2" Male N.P.T. Brass head with cored water passages and double-bridge construction Brass lever for added strength Stainless steel construction of fulcrum pin, lever and bearing spring provide long-wearing durability Available in Single and Dual models Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet Overhead irrigation of crops with solid-set, mechanized or handline systems #14 x #12 7/64" x 3/32" (2.8 x 2.5 mm) #16 x #12 1/16" x 3/32" (3.2 x 2.5 mm) #18 x #12 9/64" x 3/32" (3.5 x 2.5 mm) #20 x #12 5/32" x 3/32" (4.0 x 2.5 mm) #23 x #12 23/128" x 3/32" (4.5 x 2.5 mm)

10 423 AG 1/2" Impact Sprinkler Flow vs. Pressure #16 (1/8", 3.2mm) Green #18 (9/64", 3.6mm) Blue #20 (5/32", 4.0mm) Full and part circle impact 25º trajectory 1/2" male N.P.T. Brass head and lever with cored water passages and double bridge construction Brass deflector, deflector disk, diffuser screw, part mechanism disks, connector tube, connector base, nozzle s nut, diffuser screw nut for added strength Stainless steel construction of hammer s shaft, sector shaft, drive spring, thrust spring, diffuser spring, sector spring provide long-wearing durability Sand and dust protection sleeve ensures reliable operation and durability Hammer ensures all water inside pattern and prevents roads and neighbors. Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet Suitable for field crops like pulses, oil seeds, vegetables, sugarcane, cotton, cereals, tea, coffee and fodder crops 10

11 JI-2 3/4" Impact Sprinkler Full and part circle impact 27 trajectory 3/4" Male N.P.T. Brass head with cored water passages and doublebridge construction Brass lever for added strength Stainless steel construction of fulcrum pin, lever and bearing spring provide long-wearing durability Available in Single Models Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet All overhead irrigation of crops, specifically designed for irrigation of field edges Flow vs. Pressure #22 (11/64", 4.4mm) #24 (3/16", 4.7 mm) #26 (13/64" x 5.1 mm) #23 x #16 23/128" x 1/16" (4.5 x 3.1 mm) #26 x #16 13/64" x 1/16" (5.1 x 3.1 mm) #28 x #16 7/32" x 1/16" (5.5 x 3.1 mm)

12 233 AF - 3/4" Impact Sprinkler Full circle impact 30º trajectory 3/4" Male N.P.T. cap completely seals drive spring and protects from frost damage Brass head and lever with cored water passages and double-bridge construction Brass disk under thrust spring (in sprinklers with small nozzles only), hammer, split pin, connector tube, connector base for added strength Integrated stream-straightening vane for maximum range Sand and dust protection sleeve ensures reliable operation and durability Stainless steel construction of hammer s shaft, drive spring, thrust spring and sector lever provide long-wearing durability Available in Single and Dual models New rear nozzle for improved performances -coded bayonet nozzles for easy service Technical Data Flow Rates: gpm Working Pressure: psi Wetted Diameter: feet All overhead irrigation of crops with solid-set, mechanized or handline systems Irrigation under frost conditions in vineyards, orchards and vegetables 12

13 Flow vs. Pressure Sleeve Sleeve #18 (9/64", 3.6mm) Blue #20 (5/32", 4.0mm) #22 (11/64", 4.4mm) Brown #25 (25/128", 5.0mm) Purple #28 (7/32", 5.6mm) Orange #30 (15/64", 6.0mm) #18 x #12 (9/64" x 3/32") (3.6mm x 2.4mm) #20 x #12 ( 5/32" x 2.5mm) (4.0mm x 2.5mm) #22 x #12 s (11/64" x 3/32") (11/64" x 2.5mm) #25 x #12 s (25/128" x 3/32") (5.0mm x 2.5mm) #28 x #12 s (7/32" x 3/32") (5.6mm x 2.5mm) #30 x #12 s (15/64" x 3/32") (6.0mm x 2.5mm)

14 280 Impact Sprinkler High water distribution with spacing up to 165 feet Lightweight and easy to handle Adjustable diffuser screws for each nozzle allows streambreakage at low pressure conditions Non-clog straightening vane to ensure excellent coverage in windy conditions Available in 2" fpt as well as FC and PC Permanent and supplementary irrigation of sugarcane, maize, cotton, pastures and plantations Flow vs. Pressure #60 x #40 15/32" x 5/16" 12.0 X 8.0 mm #71 x #40 71/128" x 5/16" 14.0 x 8.0 mm #81 x #40 31/128" x 5/16" 16.0 x 8.0 mm #91 x #40 91/128" x 5/16" 18.0 x 8.0 mm #101 x #40 101/128" x 5/16" 20.0 x 8.0 mm

15 s and s inches mm #9 (9/128", 1.8mm) Light Green #11 (11/128", 2.2mm) Silver #12 SQ (3/32", 2.4mm) Yellow #12 (3/32", 2.5mm) Purple #14 (7/64", 2.8mm) Orange #15 (15/128", 3.0mm) #16 (1/8", 3.2mm) Green #18 (9/64", 3.6mm) Blue #20 (5/32", 4.0mm) #22 (11/64", 4.4mm) Brown #25 (25/128", 5.0mm) Purple #28 (7/32", 5.6mm) Orange #30 (15/64", 6.0mm) #32 (1/4", 6.4mm) Grey #36 (9/32", 7.1mm) Green as shown on Field Stand 15

16 SD (Super Diffuser) Feature Plastic protection cap protects the spring from sand, frost gives longer life to sprinkler Unique hammer with SD (super-diffuser) plate design for uniform distribution Easily interchangeable color-coded bayonet nozzles to match the required precipitation rate. Integrated stream straightening vanes for maximum throw 16 Part# / Rev#13 /