area

Transcription

1 TIRAN Integral dripper Technical information Maximum system pressure: according to dripperlines wall thickness. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclon filter is to be installed before the main filter. When sand / silt / clay solids exceed 100ppm, pre treatment will be applied according to Netafim expert team s instructions. TurboNet labyrinth with large water passage. To be welded into thick-walled dripperlines (0.9, 1.0 and 1.2 mm). Injected dripper, very low CV. UV resistant. Resistant to standard nutrients used in agricultural. Tiran drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII). Drippers Technical data 12010, 16009, 16010, and 1.0 mm. wall thickness dripperlines Flow rate* (l/h.) Maximum working pressure** (bar) Water passages dimensions Width-depth-length Filtration area (mm²) Constant K Exponent X Recommended Filtration (micron)/(mesh) / x 0.80 x / / x 0.85 x / / x 1.08 x / / x 1.40 x / / x 1.40 x /120 *Flow rate at 1.0 bar pressure **According to dripperlines wall thickness Flow rate (l/h.) vs. Pressure (bar) 12010, 16009, 16010, and 1.0 mm. wall thickness dripperlines Pressure (bar) Flow rate* (l/h) *Nominal flow rate at 1.0 bar pressure PRODUCTS_SOLUTIONS@NETAFIM.COM

2 Drippers Technical data 16012, 17012, mm. wall thickness dripperlines Flow rate* (l/h.) Maximum working pressure (bar) Water passages dimensions Width-depth-length Filtration area (mm²) Constant K Exponent X Recommended Filtration (micron)/(mesh) x 0.80 x / x 0.85 x / x 1.08 x / x 1.40 x / x 1.40 x /120 *Flow rate at 1.0 bar pressure Flow rate (l/h.) vs. Pressure (bar) 16012, 17012, mm. wall thickness dripperlines Pressure (bar) Flow rate* (l/h) *Nominal flow rate at 1.0 bar pressure Dripperlines Technical data Model Inside diameter Wall thickness Outside diameter Max. working pressure (bar) Maximum flushing pressure (bar) KD Dripperlines Package data (on bundled coils) Model Wall thickness Coil length (m.) Distance between drippers (m.) Average* coil weight (kg.) Coils in a 40 feet container (units) Total in a 40 feet container (m.) to to to to to to to *According to drippers spacing PRODUCTS_SOLUTIONS@NETAFIM.COM 2

3 tiran ID 10.3 mm Kd 0.7 Flow rate 1.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 10.3 mm Kd 0.7 Flow rate 1.5 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 10.3 mm Kd 0.7 Flow rate 2.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 10.3 mm Kd 0.7 Flow rate 4.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 10.3 mm Kd 0.7 Flow rate 8.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% PRODUCTS_SOLUTIONS@NETAFIM.COM 3

4 tiran / ID 14.2 mm Kd 0.4 Flow rate 1.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran / ID 14.2 mm Kd 0.4 Flow rate 1.5 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran / ID 14.2 mm Kd 0.4 Flow rate 2.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran / ID 14.2 mm Kd 0.4 Flow rate 4.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran / ID 14.2 mm Kd 0.4 Flow rate 8.0 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% PRODUCTS_SOLUTIONS@NETAFIM.COM 4

5 tiran ID 14.2 mm Kd 0.4 Flow rate 1.05 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.2 mm Kd 0.4 Flow rate 1.60 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.2 mm Kd 0.4 Flow rate 2.10 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.2 mm Kd 0.4 Flow rate 4.20 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.2 mm Kd 0.4 Flow rate 8.40 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% PRODUCTS_SOLUTIONS@NETAFIM.COM 5

6 tiran ID 14.6 mm Kd 0.35 Flow rate 1.05 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.6 mm Kd 0.35 Flow rate 1.60 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.6 mm Kd 0.35 Flow rate 2.10 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.6 mm Kd 0.35 Flow rate 4.20 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 14.6 mm Kd 0.35 Flow rate 8.40 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% PRODUCTS_SOLUTIONS@NETAFIM.COM 6

7 tiran ID 17.5 mm Kd 0.1 Flow rate 1.00 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 1.50 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 2.00 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 4.00 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 8.00 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% PRODUCTS_SOLUTIONS@NETAFIM.COM 7

8 tiran ID 17.5 mm Kd 0.1 Flow rate 1.05 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 1.60 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 2.10 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 4.20 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% tiran ID 17.5 mm Kd 0.1 Flow rate 8.40 l/h Inlet pressure 1.5 Bar 2% % Flat terrain % Downhill -2% DRP-PS-0057-EN PRODUCTS_SOLUTIONS@NETAFIM.COM 8