UNIRAM HCNL TECHNICAL INFORMATION

Transcription

1 UNIRAM HCNL INTEGRAL PRESSURE-COMPENSATING, CONTINUOUSLY SELF-CLEANING, ANTI-SIPHON AND HIGH ANTI-DRAIN MECHANISM DRIPPER TECHNICAL INFORMATION Pressure-compensating range: bar. Anti-Siphon and higher pressure range of the Anti-drain mechanism. Largest filter in each dripper. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team s instructions. Double TurboNet labyrinth with large water passage. To be welded into thick-walled dripperlines (0.90, 1.00, 1.20 mm). Injected dripper, very low CV. Injected silicon diaphragm. High UV resistant. Resistant to standard nutrients used in agricultural. UniRam dripperlines meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

2 DRIPPERS TECHNICAL DATA FLOW RATE* (L/H) WORKING PRESSURE RANGE WATER PASSAGES DIMENSIONS WIDTH-DEPTH-LENGTH (MM) FILTRATION AREA (MM²) CONSTANT K EXPONENT * X RECOMMENDED FILTRATION (MICRON)/(MESH) SHUT OFF PRESSURE x 0.65 x / x 0.74 x / x 0.79 x / x 0.95 x / x 1.10 x / * Within working pressure range DRIPPERLINES TECHNICAL DATA MODEL INSIDE DIAMETER (MM) WALL THICKNESS (MM) OUTSIDE DIAMETER (MM) MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS) MODEL WALL THICKNESS (MM) COIL LENGTH (M) DISTANCE BETWEEN DRIPPERS (M) AVERAGE* COIL WEIGHT (KG) COILS IN A 40 FEET CONTAINER (UNITS) TOTAL IN A 40 FEET CONTAINER (M) to to to to to to ** 1.0 *According to drippers spacing **Package only on carton/plastic coils to to PRODUCTS_SOLUTIONS@NETAFIM.COM 2

3 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 16009/16010/16012 ID 14.2 MM KD 1.3 FLOW RATE 0.85 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 16009/16010/16012 ID 14.2 MM KD 1.3 FLOW RATE 1.25 L/H

4 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 16009/16010/16012 ID 14.2 MM KD 1.3 FLOW RATE 2.0 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 16009/16010/16012 ID 14.2 MM KD 1.3 FLOW RATE 2.90 L/H

5 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 16009/16010/16012 ID 14.2 MM KD 1.3 FLOW RATE 4.40 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 14.6 MM KD 1.1 FLOW RATE 0.85 L/H

6 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 14.6 MM KD 1.1 FLOW RATE 1.25 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 14.6 MM KD 1.1 FLOW RATE 2.00 L/H

7 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 14.6 MM KD 1.1 FLOW RATE 2.90 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 14.6 MM KD 1.1 FLOW RATE 4.40 L/H

8 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 20010/20012 ID 17.5 MM KD 0.4 FLOW RATE 0.85 L/H Max. working pressure acoording the dripperline wall thickness definition Due to lateral filling time and flushing effectiveness it is not recommended to exceed 800 meters lateral length MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 20010/20012 ID 17.5 MM KD 0.4 FLOW RATE 1.25 L/H

9 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 20010/20012 ID 17.5 MM KD 0.4 FLOW RATE 2.00 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 20010/20012 ID 17.5 MM KD 0.4 FLOW RATE 2.90 L/H

10 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL 20010/20012 ID 17.5 MM KD 0.4 FLOW RATE 4.40 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 20.8 MM KD 0.3 FLOW RATE 0.85 L/H Due to lateral filling time and flushing effectiveness it is not recommended to exceed 800 meters lateral length 10

11 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 20.8 MM KD 0.3 FLOW RATE 1.25 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 20.8 MM KD 0.3 FLOW RATE 2.00 L/H

12 MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 20.8 MM KD 0.3 FLOW RATE 2.90 L/H MAX. LATERAL LENGTH (METER) AT DIFFERENT AND DIFFERENT SLOPES UNIRAM HCNL ID 20.8 MM KD 0.3 FLOW RATE 4.40 L/H DRP-PS-0104-EN 12