MICRO SPRINKLERS MICRO EMITTERS SPRINKLERS PRODUCT CATALOG

Transcription

1 MICRO SPRINKLERS MICRO EMITTERS SPRINKLERS PRODUCT CATALOG 2016

2 Products appearing in this catalogue may be covered by one or more of the following US Patent No and other U.S. patents pending or corresponding issued or pending foreign patents All rights are reserved. You are specifically prohibited and not allowed to reproduce, copy, duplicate, manufacture, supply, sell, hire, distribute or adapt all or any part of this publication including any packaging. Netafim, are trademarks of Netafim Ltd., registered in the U.S. and other countries. We endeavor to provide accurate, quality and detailed information. However we cannot accept liability for your reliance on the provided information and you are advised to independently seek professional advice from Netafim and/or its authorized representatives. There is no undertaking by us that the provided information or any part thereof is accurate, complete or up to date. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Netafim assumes no responsibility with regard to the performance or use of these products. In no event shall Netafim be liable for any indirect, incidental, special or consequential damages.

3 CONTENTS 1) Pressure compensated Micro-sprinklers and Micro-emitters SuperNet LR & LRD 4 SuperNet SR & SRD 8 SuperNet SSR 12 SuperNet UD 14 SuperNet GS 18 SuperNet JET 20 SuperNet components 24 StripNet Pro 26 Pulsar with StripNet Head 30 Pulsar with GyroNet Head 32 Pulsar with MistNet Head 36 Pulsar with VibroNet head 38 Pulsar with CoolNet Pro head 40 2) Micro-sprinklers and Micro-emitters GyroNet LR & LRD 42 GyroNet SR & SRD 46 GyroNet UD 50 GyroNet JET 50 GyroNet components 57 VibroNet SD 58 3) Micro-sprinklers and Micro-emitters Up-right stands complementary accessories Connectors and Stand accessories 60 4) Micro-emitters for nurseries and pot irrigation PC Spray Stakes 62 Spray Stake 64 5) Micro-sprinklers and Micro-emitters for protected crops SpinNet 66 SpinNet components 69 SpinNet SD 70 SpinNet SD components 73 VibroNet 74 VibroNet components 77 CoolNet Pro 78 MistNet 82 CoolNet Pro and MistNet components 84 6) Micro-sprinklers and Micro-emitters Upside-down stands complementary accessories Connectors and Stand accessories 85 7) Sprinklers and Midi-sprinklers GyroNet Turbo 86 GyroNet Turbo components 88 MegaNet 90 MegaNet components 92 D-Net ) Sprinklers stands complementary accessories connectors and stand accessories 96 9) Netafim Flexible pipes, FlexNet and FlexNet HP 98 10) Micro-tubes and tubes, complementary accessories ) Tools 103 3

4 SUPERNET LR & LRD LONG RANGE & LONG RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations with large root volumes. SPECIFICATIONS LR means a revolving rotor irrigating a large area. LRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Flow regulated micro-sprinkler, 9 different flow rates: 20, 30, 35, 40, 50, 58, 70, 90, 110 l/h. Flow rates within pressure range. Pressure range bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 2 types of upper bearing: Standard - for normal water Everspin - for harsh condition The rotor is colored Purple for flows of 20 to 40 l/h, and Black for flows of 50 to 110 l/h. SuperNet micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 4

5 SUPERNET TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR NOZZLE SIZE (MM) WORKING PRESSURE RANGE (BAR) CONSTANT K EXPONENT* X WETTED DIAMETER (M) LR MODEL 20 CM ABOVE GROUND LRD MODEL 20 CM ABOVE GROUND SWIVEL (ROTOR) CODE COLOR Purple Purple Brown Purple Light Blue Purple Blue Purple Green Black Gray Black Black Black Orange Black Red Black *within working pressure range PACKAGING DATA SUPERNET LR & LRD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 60 cm micro tube length,w/stake x 34 x Complete stand, 60 cm micro tube length,w/o stake x 34 x Complete stand, 90 cm micro tube length,w/stake x 27 x Complete stand, 90 cm micro tube length,w/o stake x 27 x SUPERNET LONG RANGE & LONG RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SuperNet SPN Long Range swivel Long Range with deflector LR LRD Barb Press fit Self tapping 3/8" Male Threaded 1/2" Male Threaded BIC MIC STIC 3/8IC 1/2IC Everspin Standard ESUB STUB 20 l/h l/h l/h l/h l/h l/h l/h l/h 090 Head only Head + 60 cm microtube + Stake Head + 60 cm microtube Head + 90 cm microtube + Stake Head + 90 cm microtube HEAD ONLY 60CM W/STK 60CM W/OSTK 90CM W/STK 90CM W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C Stream splitter AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar SP AD15 AD20 AD30 AD l/h 110 Head + XXX cm microtube + Stake STL W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. SPN Supernet LR & LRD 5

6 SUPERNET LR head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SUPERNET LR head only with Everspin upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SuperNet LR BIC, barb inlet connector SUPERNET LR assembly stands Catalog number : (any of below 6 digits) MODEL SPN LR STIC STUB XXX 60CM W/STK BC SPN LR STIC STUB XXX 60CM W/STK PFC SPN LR MIC STUB XXX 60CM W/STK BC SPN LR MIC STUB XXX 60CM W/STK PFC SPN LR BIC STUB XXX 60CM W/STK BC SPN LR BIC STUB XXX 60CM W/STK PFC SPN LR STIC STUB XXX 90CM W/STK BC SPN LR STIC STUB XXX 90CM W/STK PFC SPN LR MIC STUB XXX 90CM W/STK BC SPN LR MIC STUB XXX 90CM W/STK PFC SPN LR BIC STUB XXX 90CM W/STK BC SPN LR BIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL SPN LR STIC STUB XXX 60CM W/OSTK BC SPN LR STIC STUB XXX 60CM W/OSTK PFC SPN LR MIC STUB XXX 60CM W/OSTK BC SPN LR MIC STUB XXX 60CM W/OSTK PFC SPN LR BIC STUB XXX 60CM W/OSTK BC SPN LR BIC STUB XXX 60CM W/OSTK PFC SPN LR STIC STUB XXX 90CM W/OSTK BC SPN LR STIC STUB XXX 90CM W/OSTK PFC SPN LR MIC STUB XXX 90CM W/OSTK BC SPN LR MIC STUB XXX 90CM W/OSTK PFC SPN LR BIC STUB XXX 90CM W/OSTK BC SPN LR BIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 6 Supernet LR & LRD

7 SUPERNET LRD head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SUPERNET LRD head only with Everspin upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SuperNet LRD BIC, barb inlet connector SUPERNET LRD assembly stands Catalog number : (any of below 6 digits) MODEL SPN LRD STIC STUB XXX 60CM W/STK BC SPN LRD STIC STUB XXX 60CM W/STK PFC SPN LRD MIC STUB XXX 60CM W/STK BC SPN LRD MIC STUB XXX 60CM W/STK PFC SPN LRD BIC STUB XXX 60CM W/STK BC SPN LRD BIC STUB XXX 60CM W/STK PFC SPN LRD STIC STUB XXX 90CM W/STK BC SPN LRD STIC STUB XXX 90CM W/STK PFC SPN LRD MIC STUB XXX 90CM W/STK BC SPN LRD MIC STUB XXX 90CM W/STK PFC SPN LRD BIC STUB XXX 90CM W/STK BC SPN LRD BIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL SPN LRD STIC STUB XXX 60CM W/OSTK BC SPN LRD STIC STUB XXX 60CM W/OSTK PFC SPN LRD MIC STUB XXX 60CM W/OSTK BC SPN LRD MIC STUB XXX 60CM W/OSTK PFC SPN LRD BIC STUB XXX 60CM W/OSTK BC SPN LRD BIC STUB XXX 60CM W/OSTK PFC SPN LRD STIC STUB XXX 90CM W/OSTK BC SPN LRD STIC STUB XXX 90CM W/OSTK PFC SPN LRD MIC STUB XXX 90CM W/OSTK BC SPN LRD MIC STUB XXX 90CM W/OSTK PFC SPN LRD BIC STUB XXX 90CM W/OSTK BC SPN LRD BIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. Supernet LR & LRD 7

8 SUPERNET SR & SRD MEDIUM RANGE & MEDIUM RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations, and orchards where ground is shaded by the foliage, leaving dry strips between the rows. SPECIFICATIONS SR means a revolving rotor irrigating a medium sized area. SRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Flow regulated micro-sprinkler, 9 different flow rates: 20, 30, 35, 40, 50, 58, 70, 90, 110 l/h. Flow rates within pressure range. Pressure range bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 4 types of upper bearing: Standard - for normal water Everspin - for harsh condition With spring - for upside down application Spring with Everspin for upside down application with harsh conditions The rotor is colored Blue. SuperNet micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 8

9 SUPERNET TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR NOZZLE SIZE (MM) WORKING PRESSURE RANGE (BAR) CONSTANT K EXPONENT* X WETTED DIAMETER (M) SR MODEL 20 CM ABOVE GROUND SRD MODEL 20 CM ABOVE GROUND SWIVEL (ROTOR) CODE COLOR Purple Blue Brown Blue Light Blue Blue Blue Blue Green Blue Gray Blue Black Blue Orange Blue Red Blue *within working pressure range PACKAGING DATA SUPERNET SR & SRD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 60 cm micro tube length,w/stake x 34 x Complete stand, 60 cm micro tube length,w/o stake x 34 x Complete stand, 90 cm micro tube length,w/stake x 27 x Complete stand, 90 cm micro tube length,w/o stake x 27 x SUPERNET SHORT RANGE & SHORT RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SuperNet SPN Short Range swivel Short Range with deflector SR SRD Barb Press fit Self tapping 3/8" Male Threaded 1/2" Male Threaded BIC MIC STIC 3/8IC 1/2IC Everspin Spring Standard Spring Everspin ESUB SPUB STUB SPES 20 l/h l/h l/h l/h l/h l/h l/h l/h l/h 110 Head only Head + 60 cm microtube + Stake Head + 60 cm microtube Head + 90 cm microtube + Stake Head + 90 cm microtube Head + XXX cm microtube + Stake HEAD ONLY 60CM W/STK 60CM W/OSTK 90CM W/STK 90CM W/OSTK STL W/STK Barb Press fit 3/8" conic press fit BC PFC 3/8C Stream splitter AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar SP AD15 AD20 AD30 AD40 Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. SPN SuperNet SR & SRD 9

10 SUPERNET SR head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SUPERNET SR head only with Everspin upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SuperNet SR BIC,barb inlet connector SUPERNET SR head only with Spring upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC SUPERNET SR assembly stands Catalog number : (any of below 6 digits) MODEL SPN SR STIC STUB XXX 60CM W/STK BC SPN SR STIC STUB XXX 60CM W/STK PFC SPN SR MIC STUB XXX 60CM W/STK BC SPN SR MIC STUB XXX 60CM W/STK PFC SPN SR BIC STUB XXX 60CM W/STK BC SPN SR BIC STUB XXX 60CM W/STK PFC SPN SR STIC STUB XXX 90CM W/STK BC SPN SR STIC STUB XXX 90CM W/STK PFC SPN SR MIC STUB XXX 90CM W/STK BC SPN SR MIC STUB XXX 90CM W/STK PFC SPN SR BIC STUB XXX 90CM W/STK BC SPN SR BIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL SPN SR STIC STUB XXX 60CM W/OSTK BC SPN SR STIC STUB XXX 60CM W/OSTK PFC SPN SR MIC STUB XXX 60CM W/OSTK BC SPN SR MIC STUB XXX 60CM W/OSTK PFC SPN SR BIC STUB XXX 60CM W/OSTK BC SPN SR BIC STUB XXX 60CM W/OSTK PFC SPN SR STIC STUB XXX 90CM W/OSTK BC SPN SR STIC STUB XXX 90CM W/OSTK PFC SPN SR MIC STUB XXX 90CM W/OSTK BC SPN SR MIC STUB XXX 90CM W/OSTK PFC SPN SR BIC STUB XXX 90CM W/OSTK BC SPN SR BIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 10 SuperNet SR & SRD

11 SUPERNET SRD head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SUPERNET SRD head only with Everspin upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SuperNet SRD BIC, barb inlet connector SUPERNET SRD assembly stands Catalog number : (any of below 6 digits) MODEL SPN SRD STIC STUB XXX 60CM W/STK BC SPN SRD STIC STUB XXX 60CM W/STK PFC SPN SRD MIC STUB XXX 60CM W/STK BC SPN SRD MIC STUB XXX 60CM W/STK PFC SPN SRD BIC STUB XXX 60CM W/STK BC SPN SRD BIC STUB XXX 60CM W/STK PFC SPN SRD STIC STUB XXX 90CM W/STK BC SPN SRD STIC STUB XXX 90CM W/STK PFC SPN SRD MIC STUB XXX 90CM W/STK BC SPN SRD MIC STUB XXX 90CM W/STK PFC SPN SRD BIC STUB XXX 90CM W/STK BC SPN SRD BIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL SPN SRD STIC STUB XXX 60CM W/OSTK BC SPN SRD STIC STUB XXX 60CM W/OSTK PFC SPN SRD MIC STUB XXX 60CM W/OSTK BC SPN SRD MIC STUB XXX 60CM W/OSTK PFC SPN SRD BIC STUB XXX 60CM W/OSTK BC SPN SRD BIC STUB XXX 60CM W/OSTK PFC SPN SRD STIC STUB XXX 90CM W/OSTK BC SPN SRD STIC STUB XXX 90CM W/OSTK PFC SPN SRD MIC STUB XXX 90CM W/OSTK BC SPN SRD MIC STUB XXX 90CM W/OSTK PFC SPN SRD BIC STUB XXX 90CM W/OSTK BC SPN SRD BIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SuperNet SR & SRD 11

12 SUPERNET SSR SUPER SHORT RANGE APPLICATIONS Designed for permanent application in close proximity to trees. SPECIFICATIONS SSR means a revolving rotor irrigating a small sized area. Flow regulated micro-sprinkler, 3 different flow rates: 30, 35, 40 l/h. Flow rates within pressure range. Pressure range bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 2 types of upper bearing: Standard - for normal water Everspin - for harsh condition The rotor is colored Light Green. SuperNet micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 12

13 SUPERNET TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR NOZZLE SIZE (MM) WORKING PRESSURE RANGE (BAR) CONSTANT K EXPONENT* X WETTED DIAMETER (M) SSR MODEL 20 CM ABOVE GROUND SSR MODEL 300 CM ABOVE GROUND SWIVEL (ROTOR) CODE COLOR Brown Light Green Light Blue Light Green Blue Light Green *within working pressure range PACKAGING DATA SUPERNET SSR QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 60 cm micro tube length,w/stake x 34 x Complete stand, 60 cm micro tube length,w/o stake x 34 x Complete stand, 90 cm micro tube length,w/stake x 27 x Complete stand, 90 cm micro tube length,w/o stake x 27 x SUPERNET SSR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SuperNet SPN Super Short SSR Range swivel Barb Press fit Self tapping 3/8" Male Threaded BIC MIC STIC 3/8IC Everspin Standard ESUB STUB 30 l/h l/h l/h 040 Head only Head + 60 cm microtube + Stake Head + 60 cm microtube HEAD ONLY 60CM W/STK 60CM W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD15 AD20 AD30 1/2" Male Threaded 1/2IC Head + 90 cm microtube + Stake 90CM W/STK AD valve 4.0/1.8 bar AD40 Head + 90 cm microtube 90CM W/OSTK Head + XXX cm microtube + Stake STL W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. SPN SSR SUPERNET SSR head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. Stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SuperNet SSR 13

14 SUPERNET UD UPSIDE DOWN APPLICATIONS For application where sprinklers are mounted inverted to keep the ground clear and prevent damage to the sprinklers by harvesters and machinery. SPECIFICATIONS Special designed upside down down rotor. Flow regulated micro-sprinkler, 7 different flow rates: 30, 35, 40, 50, 58, 70, 90 l/h. Flow rates within pressure range. Pressure range bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded Upper bearing: A specially designed spring bearing keeps the anti-ant feature even when the sprinkler is mounted in an upside down position. A spring bearing with Everspin feature to improve wear resistance also in harsh conditions. The rotor is colored Green. SuperNet micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the sprinklers nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops requiring efficient water distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 14

15 SUPERNET TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR NOZZLE SIZE (MM) WORKING PRESSURE RANGE (BAR) CONSTANT K EXPONENT* X WETTED DIAMETER (M) 50 CM ABOVE CROP UD MODEL SWIVEL (ROTOR) CODE COLOR UD MODEL WETTED DIAMETER (M) 50 CM ABOVE CROP SR MODEL IN UD POSITION SWIVEL (ROTOR) CODE COLOR SR MODEL Brown Green 3.5 Blue Light Blue Green 4.0 Blue Blue Green 4.0 Blue Green Green 4.0 Blue Gray Green 4.0 Blue Black Green 4.0 Blue Orange Green 4.0 Blue * within working pressure range PACKAGING DATA SUPERNET UD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 30 cm tube length with stabilizer x 28 x Complete stand, 60 cm tube length with stabilizer x 34 x Complete stand, 90 cm tube length with stabilizer x 27 x SUPERNET UD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SuperNet SPN Up-side down swivel Short range swivel UD SR Barb Press fit Self tapping 3/8" Male Threaded 1/2" Male Threaded BIC MIC STIC 3/8IC 1/2IC Spring Standard Spring Everspin SPUB STUB SPES 30 l/h l/h l/h l/h l/h l/h l/h 090 Head only Head + 60 cm microtube Head + 90 cm microtube Head + XXX cm microtube *When selecting an undefined tube length, add the desired length in writing. HEAD ONLY 60CM W/OSTK 90CM W/OSTK STL W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 SPN SuperNet UD 15

16 SUPERNET UD head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC SUPERNET UD head only with Spring upper bearing Catalog number : (any of below 6 digits) SuperNet UD MIC, male press-fit inlet connector MODEL BIC STIC MIC SUPERNET UD assembly stands Catalog number : (any of below 6 digits) MODEL SPN UD STIC SPUB XXX 30CM W/STB BC SPN UD STIC SPUB XXX 60CM W/STB BC SPN UD STIC SPUB XXX 90CM W/STB BC SPN UD BIC SPUB XXX 30CM W/STB BC SPN UD BIC SPUB XXX 60CM W/STB BC SPN UD BIC SPUB XXX 90CM W/STB BC SPN UD MIC SPUB XXX 30CM W/STB BC SPN UD MIC SPUB XXX 60CM W/STB BC SPN UD MIC SPUB XXX 90CM W/STB BC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 16 SuperNet UD

17 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SuperNet UD 17

18 SUPERNET GS FULL FIELD OVERLAP APPLICATIONS For crops covering the entire field where full-coverage highly uniform irrigation is required. SPECIFICATIONS GS means a revolving rotor designed to provide a wetting pattern that achieves excellent distribution uniformity and full coverage. Flow regulated micro-sprinkler, 2 different flow rates: 90,110 l/h. Flow rates within pressure range. Pressure range bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded 2 types of upper bearing: Standard - for normal water Everspin - for harsh condition The rotor is colored Gray. SuperNet micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities, uniform distribution and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-sprinkler nozzle. Regulated micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for crops where full-coverage highly uniform irrigation is required. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts, clog resistant design. 18

19 SUPERNET TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR NOZZLE SIZE (MM) WORKING PRESSURE RANGE (BAR) CONSTANT K EXPONENT* X WETTED DIAMETER (M) GS 100 CM ABOVE GROUND SWIVEL (ROTOR) CODE COLOR Orange Light Gray Red Light Gray * within working pressure range PACKAGING DATA SUPERNET GS QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 60 cm micro tube length,w/stake x 34 x Complete stand, 60 cm micro tube length,w/o stake x 34 x Complete stand, 90 cm micro tube length,w/stake x 27 x Complete stand, 90 cm micro tube length,w/o stake x 27 x SUPERNET GS Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SuperNet SPN Gray swivel GS Barb Press fit Self tapping 3/8" Male Threaded 1/2" Male Threaded BIC MIC STIC 3/8IC 1/2IC Everspin Standard ESUB STUB 90 l/h l/h 110 Head only Head + 60 cm microtube Head + 90 cm microtube Head + XXX cm microtube *When selecting an undefined tube length, add the desired length in writing. HEAD ONLY 60CM W/OSTK 90CM W/OSTK STL W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 SPN GS SUPERNET GS head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC 3/8IC 1/2IC SuperNet GS, 1/2" male threaded inlet connector SUPERNET GS assembly stands Catalog number : (any of below 6 digits) MODEL SPN GS BIC STUB XXX 120CM W/OSTK PFC SPN GS MIC STUB XXX 120CM W/OSTK PFC SPN GS STIC STUB XXX 120CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SuperNet GS 19

20 SUPERNET JET APPLICATIONS The SuperNet Jet is designed for harsh water containing large amounts of sand thus causing excessive wear of standard rotating swivel. SPECIFICATIONS A static pressure compensated emitter. Flow regulated micro-emitter, 7 different flow rates: 30, 35, 40, 50, 58, 70, 90 l/h. Flow rates within pressure range. Pressure range bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 5 types of inlet connectors: Barb Self tapping Press fit 3/8" male threaded 1/2" male threaded Upper bearing: Special type of upper bearing (square hole) holds the rotor from spinning. 6 types of static deflectors: 360 degrees (12 jets ) 300 degrees (10 Jets) 2x90 (butterfly) (8 jets) 180 degrees (6 jets) 90 degrees (4 jets) FS flat spray deflector All deflectors are colored Orange. SuperNet micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Unique regulation mechanism ensures even water and nutrients quantities per tree, and wetting diameter regardless of sprinkler's inlet pressures (within pressure range). Anti-ant mechanism prevents insect penetration into the area of the micro-emitter nozzle. Regulated emitter made of plastic materials resistant to all agrochemicals & weather conditions. Water passage area 30% larger than in any other emitter with identical flow rate. The largest water passages on the market resists clogging. Specially designed for fruit trees, orchards, deciduous and other tree crops. Long-term reliable service, simple, modular parts, clog resistant design. 20

21 SUPERNET TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR NOZZLE SIZE (MM) WORKING PRESSURE RANGE (BAR) 360 DEGREES - 12 JETS 300 DEGREES - 10 JETS WETTED RADIUS (M) 20 CM ABOVE GROUND BUTTERFLY - 2*4 JETS 180 DEGREES - 6 JETS 90 DEGREES - 4 JETS FLAT SPRAY DEFLECTOR CODE COLOR Brown Orange Light Blue Orange Blue Orange Green N/A Orange Gray N/A Orange Black N/A Orange Orange N/A Orange * within working pressure range PACKAGING DATA SUPERNET JET QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 60 cm micro tube length,w/stake x 34 x Complete stand, 60 cm micro tube length,w/o stake x 34 x Complete stand, 90 cm micro tube length,w/stake x 27 x Complete stand, 90 cm micro tube length,w/o stake x 27 x SUPERNET JET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SuperNet SPN 12 jets, 360 degrees 10 jets, 300 degrees 8 jets, 2 x 90 degrees 6 jets, 180 degrees 4 jets, 90 degrees Flat spray 12J 10J 8J 6J 4J FS Barb Press fit Self tapping 3/8" Male Threaded 1/2" Male Threaded BIC MIC STIC 3/8IC 1/2IC Standard STUB 30 l/h l/h l/h l/h l/h l/h l/h 090 Head only Head + 60 cm microtube + Stake Head + 60 cm microtube Head + 90 cm microtube + Stake Head + 90 cm microtube HEAD ONLY 60CM W/STK 60CM W/OSTK 90CM W/STK 90CM W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD15 AD20 AD30 AD40 Head + XXX cm microtube + Stake STL W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. SPN STUB SuperNet Jet 21

22 SUPERNET JET 12 Jet, head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC SuperNet BIC, barb inlet connector SUPERNET JET 10 Jet, head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC SuperNet STIC, self tapping inlet connector SUPERNET JET 8 (2*90) Jet, head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC SuperNet MIC, male press-fit inlet connector SUPERNET JET 6 Jet, head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC SUPERNET JET 4 Jet, head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC SUPERNET JET FS (FLAT SPRAY) Head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL BIC STIC MIC Missing catalog numbers available upon request 22 SuperNet Jet

23 SUPERNET JET assembly stands Catalog number : (any of below 6 digits) MODEL SPNJET 12J BIC XXX 60CM W/STK BC SPNJET 12J STIC XXX 60CM W/STK BC SPNJET 12J MIC XXX 60CM W/STK BC SPNJET 12J BIC XXX 60CM W/STK PFC SPNJET 12J STIC XXX 60CM W/STK PFC SPNJET 12J MIC XXX 60CM W/STK PFC SPNJET 10J BIC XXX 60CM W/STK BC SPNJET 10J STIC XXX 60CM W/STK BC SPNJET 10J MIC XXX 60CM W/STK BC SPNJET 10J BIC XXX 60CM W/STK PFC SPNJET 10J STIC XXX 60CM W/STK PFC SPNJET 10J MIC XXX 60CM W/STK PFC SPNJET 8J BIC XXX 60CM W/STK BC SPNJET 8J STIC XXX 60CM W/STK BC SPNJET 8J MIC XXX 60CM W/STK BC SPNJET 8J BIC XXX 60CM W/STK PFC SPNJET 8J STIC XXX 60CM W/STK PFC SPNJET 8J MIC XXX 60CM W/STK PFC SPNJET 6J BIC XXX 60CM W/STK BC SPNJET 6J STIC XXX 60CM W/STK BC SPNJET 6J MIC XXX 60CM W/STK BC SPNJET 6J BIC XXX 60CM W/STK PFC SPNJET 6J STIC XXX 60CM W/STK PFC SPNJET 6J MIC XXX 60CM W/STK PFC SPNJET 4J BIC XXX 60CM W/STK BC SPNJET 4J STIC XXX 60CM W/STK BC SPNJET 4J MIC XXX 60CM W/STK BC SPNJET 4J BIC XXX 60CM W/STK PFC SPNJET 4J STIC XXX 60CM W/STK PFC SPNJET 4J MIC XXX 60CM W/STK PFC Catalog number : (any of below 6 digits) MODEL SPNJET 12J BIC XXX 60CM W/OSTK BC SPNJET 12J STIC XXX 60CM W/OSTK BC SPNJET 12J MIC XXX 60CM W/OSTK BC SPNJET 12J BIC XXX 60CM W/OSTK PFC SPNJET 12J STIC XXX 60CM W/OSTK PFC SPNJET 12J MIC XXX 60CM W/OSTK PFC SPNJET 10J BIC XXX 60CM W/OSTK BC SPNJET 10J STIC XXX 60CM W/OSTK BC SPNJET 10J MIC XXX 60CM W/OSTK BC SPNJET 10J BIC XXX 60CM W/OSTK PFC SPNJET 10J STIC XXX 60CM W/OSTK PFC SPNJET 10J MIC XXX 60CM W/OSTK PFC SPNJET 6J BIC XXX 60CM W/OSTK BC SPNJET 6J STIC XXX 60CM W/OSTK BC SPNJET 6J MIC XXX 60CM W/OSTK BC SPNJET 6J BIC XXX 60CM W/OSTK PFC SPNJET 6J STIC XXX 60CM W/OSTK PFC SPNJET 6J MIC XXX 60CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective deflector. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SuperNet Jet 23

24 SUPERNET COMPONENTS STANDARD UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL SUPERNET MICRO- SPRINKLERS STANDARD UPPER BEARING SQUARE HOLE - TO BE USED ON ALL SUPERNET MICRO-JETS (GRAY) EVERSPIN UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL SUPERNET MICRO- SPRINKLERS IN HARSH WATER CONDITIONS SPRING UPPER BEARING CIRCULAR HOLE - TO BE USED ON UD SUPERNET MICRO- SPRINKLERS 1 unit unit unit unit units/bag units/bag units/bag units/bag FRAME 1 unit units/bag units/bag STREAM SPLITTER 1 unit units/bag 100 units/bag SPRING EVERSPIN UPPER BEARING - TO BE USED ON UD SUPERNET MICRO- SPRINKLERS IN HARSH WATER CONDITIONS 1 unit units/bag LR SWIVEL (PURPLE) TO BE USED WITH 20, 30, 35 AND 40 L/H 1 unit units/bag units/bag LR SWIVEL (BLACK) TO BE USED WITH 50, 58, 70, 90 AND 110L/H 1 unit units/bag units/bag SR SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit units/bag units/bag LRD SWIVEL (PURPLE) TO BE USED WITH 20, 30, 35 AND 40 L/H 1 unit units/bag units/bag LRD SWIVEL (BLACK) TO BE USED WITH 50, 58, 70, 90 AND 110L/H 1 unit units/bag 100 units/bag SRD SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit units/bag 100 units/bag UD SWIVEL (GREEN) W/SLEEVE TO BE USED WITH 30, 35, 40, 50, 58 AND 70 L/H 1 unit units/bag units/bag LR SWIVEL (GRAY) TO BE USED WITH GS MODEL 90 AND 110 L/H 1 unit units/bag units/bag SSR SWIVEL (LIGHT GREEN) TO BE USED WITH 30, 35 AND 40 L/H 1 unit units/bag 100 units/bag STATIC DEFLECTORS TO BE USED WITH 30, 35, 40, 50, 58, 70 AND 90 L/H 1 unit 100 units/bag 12 jets (360 degrees) jets (300 degrees) jets (2*90 degrees) jets (180 degrees) jets (90 degrees) FS, flat spray Missing catalog numbers available upon request 24 SuperNet

25 SUPERNET COMPONENTS NOZZLE TUBE DIAPHRAGM 1 unit l/h l/h l/h l/h l/h l/h l/h l/h l/h units/bag O RING 1 unit units/bag FLOW CONTROL CHAMBER WITH BARB INLET CONNECTOR FLOW CONTROL CHAMBER WITH BARB INLET CONNECTOR + ASSEMBLY "O" RING 20 l/h Purple 30 l/h Brown 35 l/h Light Blue 40 l/h Blue 50 l/h Green 58 l/h Gray 70 l/h Black 90 l/h Orange 110 l/h Red 20 l/h Purple 30 l/h Brown 35 l/h 40 l/h 50 l/h Green 58 l/h 70 l/h 90 l/h 110 l/h FLOW CONTROL CHAMBER WITH SELF TAPPING INLET CONNECTOR 20 l/h Purple 30 l/h Brown 35 l/h Light Blue 40 l/h Blue 50 l/h Green 58 l/h Gray 70 l/h Black 90 l/h Orange 110 l/h Red FLOW CONTROL CHAMBER WITH SELF TAPPING INLET CONNECTOR + ASSEMBLY "O" RING 20 l/h Purple 30 l/h Brown 35 l/h Light Blue 40 l/h Blue 50 l/h Green 58 l/h Gray 70 l/h Black 90 l/h Orange 110 l/h Red FLOW CONTROL CHAMBER WITH MALE PRESS-FIT INLET CONNECTOR 20 l/h Purple 30 l/h Brown 35 l/h Light Blue 40 l/h Blue 50 l/h Green 58 l/h Gray 70 l/h Black 90 l/h Orange 110 l/h Red FLOW CONTROL CHAMBER WITH 3/8 MALE THREADED INLET CONNECTOR FLOW CONTROL CHAMBER WITH 1/2 MALE THREADED INLET CONNECTOR 20 l/h Purple 30 l/h Brown 35 l/h Light Blue 40 l/h Blue 50 l/h Green 58 l/h Gray 70 l/h Black 90 l/h Orange 110 l/h Red 20 l/h Purple 30 l/h Brown 35 l/h Light Blue 40 l/h Blue 50 l/h Green 58 l/h Gray 70 l/h Black 90 l/h Orange 110 l/h Red Missing catalog numbers available upon request SuperNet 25

26 STRIPNET PRO PRESSURE-COMPENSATED, STRIP EMITTER APPLICATIONS Strip frost mitigation on vineyards. Cooling of trellised crops. SPECIFICATIONS Pressure compensated static emitter. Pressure regulating range: bar. Rectangular water covering pattern: 0.5 meters wide by 5.5 meters long. Inlet connectors: barb. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Maximum recommended distance between heads: 5.0 meters. One active, brown colored nozzle; one plugged, black colored nozzle. Can be mounted on wood or metal stakes or between two of the existing wires on the growing line. No moving parts. Acid resistant (AA) raw materials. FEATURES AND BENEFITS Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. The StripNet Pro Frost mitigation system operates using as little as 20 m³/hectare (depending on vine row spacing) - less than half the water required by full-coverage sprinkler systems. Alignment problems are solved with the unique, grower-friendly mounting bracket between wires system; simply install it and then forget about it. Proper alignment is inherent. Micro-emitter made of plastic materials is resistant to all agrochemicals and weather conditions. Energy and water saving. Long-term reliable service, simple, modular parts. 26

27 STRIPNET PRO TECHNICAL DATA MODEL PACKAGING DATA STRIPNET PRO FLOW RATE* (I/H) CODE COLOR QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) NOZZLE WATER PASSAGES AREA (MM²) BOX WEIGHT (KG) WORKING PRESSURE RANGE (BAR) BOXES P/PALLET WETTED AREA TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 34 x Complete stand (120 cm) w/o stake x 26 x Complete stand (200 cm) w/o stake x 26 x (M X M) ACTIVE NOZZLE CODE COLOR Brown x 5.5 Brown *Within working pressure range STRIPNET PRO HEAD ONLY MODEL BIC STRIPNET PRO COMPONENTS STRIPNET PRO, ACTIVE NOZZLE (BROWN) STRIPNET PRO, PLUGGED NOZZLE (BLACK) STRIPNET PRO "Y" NOZZLES BODY STRIPNET PRO TUBE STRIPNET PRO ASSEMBLY STANDS Catalog number : (any of below 6 digits) MODEL 030 STRIPNET PRO BIC CM W/OSTK STRIPNET PRO BIC CM W/OSTK All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered. StripNet Pro 27

28 ASSEMBLY OPTIONS STRIPNET PRO CAN BE ASSEMBLED IN ONE OF THE FOLLOWING THREE WAYS: On a wooden pole, with a Netafim clamp, Catalog number, 1 unit: units p/box, 28 x 27 x 57 cm, 5.8 kg On a metal stake (2.5 to 5.0 mm thick ), with a Netafim special design clamp, Catalog number, 1 unit: units p/box, 35 x 35 x57 cm, 14.5 kg When the distances between stakes are more than five meters, or when exact alignment is preferred, it is recommended to use the Netafim "bracket between wires", unique installation system between two of the vineyard metal wires. This product includes two injected plastic parts, a metal or fiberglass rod (according to the user's choice), and two metal wires for tightening. 2 plastic parts Catalog number: units p/box (only the 2 plastic parts), 18 x 34 x 79 cm, 6.3 kg Double loop wires ties (2 units) Catalog number: Metal rod, 6 mm diameter 60 cm length Catalog number: cm length Catalog number: *Other metal rod lengths available upon request 28 StripNet Pro

29 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 29

30 PULSAR WITH STRIPNET HEAD PRESSURE COMPENSATED EMITTER APPLICATIONS Strip frost-mitigation in vineyards. Cooling of trellised crops. SPECIFICATIONS Pressure compensated static micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and micro-emitter head. Pressure regulating range: bar. Minimum working pressure at the pressure compensated dripper inlet: 2.5 bar. Micro-emitter height above distributor pipe should be added to the required minimum recommended working pressure, when calculating the minimal pressure required for product s proper operation. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to Netafim expert team s instructions. Flow rates: 12, 15, 20 l/h. Rectangular water covering pattern. Maximum recommended distance between heads: 6.0 meters. In order to ensure the length of the water covering pattern, make sure that the poles of the vineyards on which the Pulsars are to be installed, are absolutely vertical. One active, brown colored nozzle; one plugged, black colored nozzle. Inlet connectors: barb. Can be mounted on wood or metal stakes. No moving parts. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS The Pulsar -StripNet frost-mitigation system operates using as little as 10 m³/h hectare (depending on vine row spacing) - less than 70% the water required by full-coverage sprinkler systems. Several pulses per minute, according to the selected flow rate, ensure continuous irrigation over a large area for many hours. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. Soil saturation / flooding are avoided even after many hours of irrigation. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. Distributes relatively small water amounts over a large wetted area. 30

31 PACKAGING DATA PULSAR QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only (UR tube+ad valve+stripnet) X 31 X Complete UR stand (120 cm.) w/o stake x 27 x Complete UR stand (200 cm.) w/o stake x 27 x PULSAR WITH STRIPNET HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT STAND FLOW EMITTER AD VALVE STAND ASSEMBLY Pulsar PLSR Up-rigth URB Without flow regulator l/h l/h l/h 020 StripNet STR31 AD blue pin ADBLUP Complete head (without micro tube and flow regulator) Head cm micro-tube (without adapter) Head cm micro-tube (without adapter) HEAD 120CM W/O ADP 200CM W/O ADP *When selecting an undefined tube length, add the desired length in writing. PLSR URB STR31 ADBLUP DESCRIPTION AND CATALOG NUMBER SAMPLE CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 012 STR31 ADBLUP 120CM W/O ADP PRODUCT COMPONENTS: Pulsar, Flow regulator 12 l/h, 120 cm micro-tube, tube with barb inlet connector, AD valve with blue pin, StripNet head with one active nozzle OTHERS ACTIVE CATALOG NUMBERS CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 012 STR31 ADBLUP 200CM CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 015 STR31 ADBLUP 200CM CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 020 STR31 ADBLUP 200CM *Other catalog numbers, according to desired product definition, available upon request. ASSEMBLY OPTIONS Pulsar UR can be assembled in one of the following ways: CLAMP FOR WOOD POLES CLAMP FOR METAL STAKES ADAPTER TO METAL/ FIBERGLASS RODS mm rod (Blue) mm rod (Black) For correct installation of the Pulsar UR it is recommended to use special UV protected bands for this purpose: Black band 380*4.8 UV (100/bag). Catalog number: (100 units /bag) Pulsar with StripNet Head 31

32 PULSAR WITH GYRONET HEAD PRESSURE COMPENSATED EMITTER APPLICATIONS Frost-mitigation in fruit trees. Cooling of fruit trees and other crops. SPECIFICATIONS Pressure compensated micro-sprinkler. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and micro-sprinkler head. Pressure regulating range: according to model. Minimum working pressure at the pressure compensated dripper inlet: 1.7 or 2.5 bar. Micro-sprinkler height above distributor pipe should be added to the required minimum recommended working pressure, when calculating the minimal pressure required for product s proper operation. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to Netafim expert team s instructions. Flow rates: 8, 12, 15, 20, 25 l/h. 3 different swivels : SR, SRD, SSR (distribution data attached). Recommended installation: one emitter above each tree or according to the crop needs. In order to ensure the water covering pattern, make sure that the poles / rods / stakes on which the Pulsar's are to be installed, are absolutely vertical. Inlet connectors: barb. Can be mounted on wood or metal stakes. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS The Pulsar -GyroNet frost-mitigation / cooling system operates using as little as 15 m³/h hectare (depending on trees spacing) - less than 50% the water required by full-coverage sprinkler systems. Several pulses per minute, according to the selected flow rate, ensure continuous irrigation over a large area for many hours. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. Soil saturation / flooding are avoided even after many hours of irrigation. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-sprinkler made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. Distributes relatively small water amounts over a large wetted area. 32

33 PULSAR WITH GYRONET HEAD IN UP RIGTH (UR) INSTALLATIONS MODEL PULSAR FLOW RATE (L/H) WHIT BLUE PIN AD VALVE, AT 2.5 BAR PRESSURE AT THE FLOW REGULATOR INLET WETTED DIAMETER* (M) QUANTITY P/BOX UNITS WETTED AREA (M²) BOX SIZE (CM X CM X CM) PRECIPITATION RATE AVERAGE (MM/H) BOX WEIGHT (KG) WHIT BLACK PIN AD VALVE, AT 1.7 BAR PRESSURE AT THE FLOW REGULATOR INLET WETTED DIAMETER* (M) BOXES P/PALLET WETTED AREA TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only (UR tube+ad valve+gyronet) X 31 X Head only (UD tube+ad valve+gyronet) X 28 X Complete UR stand (120 cm.) w/o stake x 27 x Complete UR stand (200 cm.) w/o stake x 27 x Complete UD stand (30 cm.) w/o stake x 27 x (M²) PRECIPITATION RATE AVERAGE (MM/H) GyroNet SR GyroNet SR GyroNet SR GyroNet SR GyroNet SR GyroNet SRD GyroNet SRD GyroNet SRD GyroNet SRD GyroNet SRD GyroNet SSR GyroNet SSR GyroNet SSR GyroNet SSR GyroNet SSR * wetted diameter at 0.5 meter above crop PULSAR WITH GYRONET HEAD IN UPSIDE DOWN (UD) INSTALLATIONS MODEL FLOW RATE (L/H) WHIT BLUE PIN AD VALVE, AT 2.5 BAR PRESSURE AT THE FLOW REGULATOR INLET WETTED DIAMETER* (M) WETTED AREA (M²) PRECIPITATION RATE AVERAGE (MM/H) GyroNet SR GyroNet SR GyroNet SR GyroNet SSR GyroNet SSR GyroNet SSR * wetted diameter at 2.5 bar pressure at the flow regulator inlet and at 0.5 meter above crop PACKAGING DATA Pulsar with GyroNet Head 33

34 PULSAR WITH GYRONET HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT STAND FLOW EMITTER AD VALVE STAND ASSEMBLY Pulsar PLSR Up-rigth Upside down URB UDB Without flow regulator l/h l/h l/h 015 GyroNet SR GyroNet SRD GyroNet SSR GYR9SR GYR9SRD GYR9SSR AD blue pin ADBLUP AD black pin ADBLCK Complete head (without micro tube and flow regulator) Head + 30 cm micro-tube Head cm micro-tube HEAD 30CM W/O ADP 120CM W/O ADP 20 l/h 020 *When selecting an undefined tube length, add the desired length in writing. PLSR DESCRIPTION AND CATALOG NUMBER SAMPLE CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 020 GYR9SR ADBLUP 120CM PRODUCT COMPONENTS: Pulsar, Flow regulator 20 l/h, 120 cm micro-tube, tube with barb inlet connector, AD valve with blue pin, GyroNet head with SR (short range) swivel OTHERS ACTIVE CATALOG NUMBERS CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 008 GYR9SR ADBLUP 60CM CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 020 GYR9SSR ADBLUP 120CM CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 020 GYR9SSR ADBLUP 200CM CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 025 GYR9SR ADBLUP 120CM CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 025 GYR9SSR ADBLUP 120CM *Other catalog numbers, according to desired product definition, available upon request. ASSEMBLY OPTIONS Pulsar UR can be assembled in one of the following ways: CLAMP FOR WOOD POLES CLAMP FOR METAL STAKES ADAPTER TO METAL/ FIBERGLASS RODS mm rod (Blue) mm rod (Black) For correct installation of the Pulsar UR it is recommended to use special UV protected bands for this purpose: Black band 380*4.8 UV (100/bag). Catalog number: (100 units /bag) 34 Pulsar with GyroNet Head

35 35

36 PULSAR WITH MISTNET HEAD PRESSURE COMPENSATED EMITTER APPLICATIONS Cooling and humidification of trees areas. SPECIFICATIONS Pressure compensated static micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and micro-emitter head. Pressure regulating range: bar. Minimum working pressure at the pressure compensated dripper inlet: 2.5 bar. Micro-sprinkler height above distributor pipe should be added to the required minimum recommended working pressure, when calculating the minimal pressure required for product s proper operation. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to Netafim expert team s instructions. Flow rates: 8 l/h. Recommended installation: one emitter above or in the middle of each tree. Static micro-emitter, no moving parts. Inlet connectors: barb. Can be mounted on wood or metal stakes. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS The Pulsar -MistNet cooling system operates using as little as 10 m³/h hectare (depending on trees spacing). Several pulses per minute ensure continuous irrigation over a large area for many hours. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for hillside applications or longer rows. Soil saturation / flooding are avoided even after many hours of irrigation. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Distributes relatively small water amounts over a large wetted area. 36

37 PACKAGING DATA PULSAR QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only (UR tube+ad valve+mistnet) X 31 X Complete UR stand (120 cm.) w/o stake x 27 x Complete UR stand (200 cm.) w/o stake x 27 x PULSAR WITH MISTNET HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT STAND FLOW EMITTER AD VALVE STAND ASSEMBLY Pulsar PLSR Up-rigth URB Without flow regulator l/h 008 MistNet MST25 AD blue pin ADBLUP Complete head (without micro tube and flow regulator) Head cm micro-tube (without adapter) HEAD 120CM W/O ADP Head cm micro-tube (without adapter) 200CM W/O ADP *When selecting an undefined tube length, add the desired length in writing. PLSR URB MST25 ADBLUP DESCRIPTION AND CATALOG NUMBER SAMPLE CATALOG NUMBER: SAP DESCRIPTION: PLSR URB 008 MST25 ADBLUP 200CM PRODUCT COMPONENTS: Pulsar, Flow regulator 8 l/h, 120 cm micro-tube, tube with barb inlet connector, AD valve with blue pin, MistNet head. ASSEMBLY OPTIONS Pulsar UR can be assembled in one of the following ways: CLAMP FOR WOOD POLES CLAMP FOR METAL STAKES ADAPTER TO METAL/ FIBERGLASS RODS mm rod (Blue) mm rod (Black) For correct installation of the Pulsar UR it is recommended to use special UV protected bands for this purpose: Black band 380*4.8 UV (100/bag). Catalog number: (100 units /bag) Pulsar with MistNet Head 37

38 PULSAR WITH VIBRONET HEAD PRESSURE COMPENSATED EMITTER DISTRIBUTES RELATIVELY SMALL WATER AMOUNTS OVER A LARGE WETTED AREA APPLICATIONS On germination tables, very low precipitation rate irrigation in upside down stands. SPECIFICATIONS Pressure compensated micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and VibroNet head. Minimum working pressure at the flow regulator inlet: 3.5 bar. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to Netafim expert team's instructions. Flow rates: 8, 12, 15, 20 l/h. Recommended installation: 1.5 meter above the crop at 1.6*1.6 to 2*2 meters rectangular shape. Inlet connectors: barb. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS Several pulses per minute ensure continuous irrigation over a large area. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for longer rows. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. 38

39 PACKAGING DATA PULSAR QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Complete UD stand (30 cm.) x 27 x PULSAR WITH VIBRONET HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT STAND FLOW EMITTER AD VALVE STAND ASSEMBLY Pulsar PLSR Upside down UDB Without flow regulator l/h l/h l/h 015 VibroNet VBN50 AD Purple pin ADPURP Complete head (without micro tube and flow regulator) Head + 30 cm micro-tube (without adapter) Head + 60 cm micro-tube (without adapter) HEAD 30CM W/O ADP 60CM W/O ADP 20 l/h 020 *When selecting an undefined tube length, add the desired length in writing. PLSR UDB VBN50 ADPURP DESCRIPTION AND CATALOG NUMBER SAMPLE Sap description: PLSR UDB 012 VBN50 ADPURP 30CM GRAY Catalog number: Product components: Pulsar, Flow regulator 12 l/h, 30 cm gray micro-tube, tube with barb inlet connector, AD valve with purple pin, VibroNet head. Pulsar with VibroNet Head 39

40 PULSAR WITH COOLNET PRO HEAD PRESSURE COMPENSATED EMITTER DISTRIBUTES RELATIVELY SMALL WATER AMOUNTS OVER A LARGE WETTED AREA APPLICATIONS Cooling or Humidification. SPECIFICATIONS Pressure compensated micro-emitter. Consists of a flow regulator (Pressure Compensated dripper), a micro tube connecting between the regulator and the tube chamber inlet, a tube with an air bag inside, AD valve and CoolNet Pro head. Minimum working pressure at the flow regulator inlet: 3.5 bar. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand in the water exceeds 2 ppm exists, Hydrocyclone is to be installed before the main filter. When sand / silt / clay exceed 100 ppm, pre-treatment will be applied according to Netafim expert team's instructions. Flow rates: 8, 12, 15 l/h. Recommended installation: 3*3 meters rectangular shape as high it is possible, all the emitters at the same level. Inlet connectors: barb. Chemical resistant to standard nutrients used in agricultural. FEATURES AND BENEFITS Several pulses per minute ensure continuous water distribution over a large area. Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range. 100 % uniformity of water distribution along the laterals. Unique regulation mechanism makes it the perfect choice for longer rows. The water supply system including pump, filtration system, pipes and fittings is relatively small and far less expensive to purchase, install and maintain. Micro-emitter made of plastic materials resistant to standard nutrients used in agricultural and weather conditions. Energy and water saving. Simple, modular parts. 40

41 PACKAGING DATA PULSAR QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Complete UD stand (30 cm.) x 27 x PULSAR WITH COOLNET PRO HEAD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. PRODUCT STAND FLOW EMITTER AD VALVE STAND ASSEMBLY Pulsar PLSR Upside down UDB Without flow regulator l/h l/h l/h 015 CoolNet COOL4X14 AD Purple pin ADPURP Complete head (without micro tube and flow regulator) Head + 30 cm micro-tube (without adapter) Head + 60 cm micro-tube (without adapter) HEAD 15CM W/O ADP 30CM W/O ADP *When selecting an undefined tube length, add the desired length in writing. PLSR UDB COOL4X14 ADPURP DESCRIPTION AND CATALOG NUMBER SAMPLE Sap description: PLSR UDB 008 COOL4X14 ADPURP 15CM Catalog number: Product components: Pulsar, Flow regulator 8.0 l/h, 15 cm gray micro-tube, tube with barb inlet connector, AD valve with purple pin, CoolNet Pro head. Pulsar with CoolNet Pro Head 41

42 GYRONET LR & LRD LONG RANGE & LONG RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations with large root volumes. SPECIFICATIONS LR means a revolving rotor irrigating a large area. LRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Micro-sprinkler, 10 different flow rates: 27, 40, 58, 70, 90, 120, 150, 200, 250, 300 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 3 types of inlet connectors: Self tapping Press fit 3/8" male threaded 2 types of upper bearing: Standard - for normal water Everspin - for harsh conditions The rotor is colored Purple for flows 27 and 40 l/h, Black for flows of 50 to 120 l/h and Gray for flows of 150 to 300 l/h. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-sprinklers nozzle. Micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts. 42

43 GYRONET TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) CONSTANT K EXPONENT X MAXIMUM WORKING PRESSURE (BAR) WETTED DIAMETER (M) LR 20 CM ABOVE GROUND LRD 20 CM ABOVE GROUND SWIVEL (ROTOR) CODE COLOR 027 Brown Purple 040 Blue Purple 058 Gray Black 070 Black Black 090 Orange Black 120 Red Black 150 Sky Blue N/A Gray 200 Yellow N/A Gray 250 Purple N/A Gray 300 Green N/A Gray PACKAGING DATA GYRONET LR & LRD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand (60 cm) w/stake x 34 x Complete stand (60 cm) w/o stake x 34 x Complete stand (90 cm) w/stake x 27 x Complete stand (90 cm) w/o stake x 27 x GYRONET LONG RANGE & LONG RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES GyroNet GYR Long Range swivel Long Range with deflector LR LRD Press fit male Self tapping 3/8" male threaded MIC STIC 3/8IC Everspin Standard ESUB STUB 27 l/h l/h l/h l/h l/h 090 Head only Head + 60 cm microtube + Stake Head + 60 cm microtube HEAD ONLY 60CM W/STK 60CM W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C Stream splitter AD valve 1.5/0.7 bar SP AD l/h l/h l/h 200 Head + 90 cm microtube + Stake Head + 90 cm microtube 90CM W/STK 90CM W/OSTK 250 l/h l/h 300 Head + XXX cm microtube + Stake STL W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. GYR GyroNet LR & LRD 43

44 GYRONET LR head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL STIC MIC 3/8IC N/A N/A N/A N/A N/A N/A GYRONET LR head only with Everspin upper bearing Catalog number : (any of below 6 digits) Model STIC MIC 3/8IC N/A N/A N/A N/A N/A N/A GyroNet LR STIC, self tapping inlet connector GyroNet LR MIC, press fit, male inlet connector GyroNet LR 3/8" male threaded inlet connector GYRONET LR assembly stands Catalog number : (any of below 6 digits) MODEL GYR LR STIC STUB XXX 60CM W/STK BC N/A N/A N/A GYR LR STIC STUB XXX 60CM W/STK PFC N/A N/A N/A GYR LR MIC STUB XXX 60CM W/STK BC GYR LR MIC STUB XXX 60CM W/STK PFC GYR LR STIC STUB XXX 90CM W/STK BC N/A N/A N/A GYR LR STIC STUB XXX 90CM W/STK PFC N/A N/A N/A GYR LR MIC STUB XXX 90CM W/STK BC GYR LR MIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL GYR LR STIC STUB XXX 60CM W/OSTK BC N/A N/A N/A GYR LR STIC STUB XXX 60CM W/OSTK PFC N/A N/A N/A GYR LR MIC STUB XXX 60CM W/OSTK BC GYR LR MIC STUB XXX 60CM W/OSTK PFC GYR LR STIC STUB XXX 90CM W/OSTK BC N/A N/A N/A GYR LR STIC STUB XXX 90CM W/OSTK PFC N/A N/A N/A GYR LR MIC STUB XXX 90CM W/OSTK BC GYR LR MIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 44 GyroNet LR & LRD

45 GYRONET LRD head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL STIC MIC 3/8IC N/A N/A N/A N/A N/A N/A GYRONET LRD head only with Everspin upper bearing Catalog number : (any of below 6 digits) Model STIC MIC 3/8IC N/A N/A N/A N/A N/A N/A 300 N/A N/A GyroNet LRD STIC, self tapping inlet connector GyroNet LRD MIC, press fit, male inlet connector GyroNet LRD 3/8" male threaded inlet connector GYRONET LRD assembly stands Catalog number : (any of below 6 digits) MODEL GYR LRD STIC STUB XXX 60CM W/STK BC N/A N/A N/A GYR LRD STIC STUB XXX 60CM W/STK PFC N/A N/A N/A GYR LRD MIC STUB XXX 60CM W/STK BC GYR LRD MIC STUB XXX 60CM W/STK PFC GYR LRD STIC STUB XXX 90CM W/STK BC N/A N/A N/A GYR LRD STIC STUB XXX 90CM W/STK PFC N/A N/A N/A GYR LRD MIC STUB XXX 90CM W/STK BC GYR LRD MIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL GYR LRD STIC STUB XXX 60CM W/OSTK BC N/A N/A N/A GYR LRD STIC STUB XXX 60CM W/OSTK PFC N/A N/A N/A GYR LRD MIC STUB XXX 60CM W/OSTK BC GYR LRD MIC STUB XXX 60CM W/OSTK PFC GYR LRD STIC STUB XXX 90CM W/OSTK BC N/A N/A N/A GYR LRD STIC STUB XXX 90CM W/OSTK PFC N/A N/A N/A GYR LRD MIC STUB XXX 90CM W/OSTK BC GYR LRD MIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. GyroNet LR & LRD 45

46 GYRONET SR & SRD MEDIUM RANGE & MEDIUM RANGE WITH DEFLECTOR APPLICATIONS Irrigation of tree plantations, and orchards where ground is shaded by the foliage, leaving dry strips between the rows. SPECIFICATIONS SR means a revolving rotor irrigating a medium sized area. SRD stream deflector concentrates all the water in the area surrounding the young tree during the initial growing period. When the tree grows, the stream deflector can be broken off, thus enabling extended irrigation diameter. Micro-sprinkler, 10 different flow rates: 27, 40, 58, 70, 90, 120, 150, 200, 250, 300 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 3 types of inlet connectors: Self tapping Press fit 3/8" male threaded 4 types of upper bearing: Standard - for normal water Everspin - for harsh condition With spring - for upside down application Spring Everspin for upside down application under harsh condition The rotor is colored Blue. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-sprinklers nozzle. Micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts. 46

47 GYRONET TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) CONSTANT K EXPONENT X MAXIMUM WORKING PRESSURE (BAR) WETTED DIAMETER (M) SR 20 CM ABOVE GROUND SRD 20 CM ABOVE GROUND SWIVEL (ROTOR) CODE COLOR 027 Brown Blue 040 Blue Blue 058 Gray Blue 070 Black Blue 090 Orange Blue 120 Red Blue 150 Sky Blue Blue 200 Yellow Blue 250 Purple Blue 300 Green Blue PACKAGING DATA GYRONET SR & SRD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand (60 cm) w/stake x 34 x Complete stand (60 cm) w/o stake x 34 x Complete stand (90 cm) w/stake x 27 x Complete stand (90 cm) w/o stake x 27 x GYRONET SHORT RANGE & SHORT RANGE WITH DEFLECTOR Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES GyroNet GYR Short Range swivel Short Range with deflector SR SRD Press fit male Self tapping 3/8" male threaded MIC STIC 3/8IC Everspin Spring Standard Spring Everspin ESUB SPUB STUB SPES 27 l/h l/h l/h l/h l/h 090 Head only Head + 60 cm microtube + Stake Head + 60 cm microtube HEAD ONLY 60CM W/STK 60CM W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C Stream splitter AD valve 1.5/0.7 bar SP AD l/h l/h l/h 200 Head + 90 cm microtube + Stake Head + 90 cm microtube 90CM W/STK 90CM W/OSTK 250 l/h l/h 300 Head + XXX cm microtube + Stake STL W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. GYR GyroNet SR & SRD 47

48 GYRONET SR head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL STIC MIC 3/8IC N/A N/A N/A N/A N/A 300 N/A GYRONET SR head only with Everspin upper bearing Catalog number : (any of below 6 digits) Model STIC MIC 3/8IC N/A N/A N/A N/A 250 N/A 300 N/A GyroNet SR STIC, self tapping inlet connector GyroNet SR MIC, press fit, male inlet connector GYRONET SR head only with Spring upper bearing Catalog number : (any of below 6 digits) MODEL STIC MIC 3/8IC N/A N/A N/A N/A 250 N/A N/A GYRONET SR assembly stands Catalog number : (any of below 6 digits) MODEL GYR SR STIC STUB XXX 60CM W/STK BC N/A N/A N/A GYR SR STIC STUB XXX 60CM W/STK PFC N/A N/A N/A GYR SR MIC STUB XXX 60CM W/STK BC GYR SR MIC STUB XXX 60CM W/STK PFC GYR SR STIC STUB XXX 90CM W/STK BC N/A N/A N/A GYR SR STIC STUB XXX 90CM W/STK PFC N/A N/A N/A GYR SR MIC STUB XXX 90CM W/STK BC GYR SR MIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL GYR SR STIC STUB XXX 60CM W/OSTK BC N/A N/A N/A GYR SR STIC STUB XXX 60CM W/OSTK PFC N/A N/A N/A GYR SR MIC STUB XXX 60CM W/OSTK BC GYR SR MIC STUB XXX 60CM W/OSTK PFC GYR SR STIC STUB XXX 90CM W/OSTK BC N/A N/A N/A GYR SR STIC STUB XXX 90CM W/OSTK PFC N/A N/A N/A GYR SR MIC STUB XXX 90CM W/OSTK BC GYR SR MIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 48 GyroNet SR & SRD

49 GYRONET SRD Head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL STIC MIC 3/8IC N/A N/A N/A N/A N/A N/A GYRONET SRD head only with Everspin upper bearing Catalog number : (any of below 6 digits) Model STIC MIC 3/8IC N/A N/A N/A N/A N/A 300 N/A GyroNet SRD STIC, self tapping inlet connector GyroNet SRD MIC, press fit, male inlet connector GyroNet SRD 3/8" male threaded inlet connector GYRONET SRD assembly stands Catalog number : (any of below 6 digits) MODEL GYR SRD STIC STUB XXX 60CM W/STK BC GYR SRD STIC STUB XXX 60CM W/STK PFC GYR SRD MIC STUB XXX 60CM W/STK BC GYR SRD MIC STUB XXX 60CM W/STK PFC GYR SRD STIC STUB XXX 90CM W/STK BC GYR SRD STIC STUB XXX 90CM W/STK PFC GYR SRD MIC STUB XXX 90CM W/STK BC GYR SRD MIC STUB XXX 90CM W/STK PFC Catalog number : (any of below 6 digits) MODEL GYR SR STIC STUB XXX 60CM W/OSTK BC GYR SR STIC STUB XXX 60CM W/OSTK PFC GYR SR MIC STUB XXX 60CM W/OSTK BC GYR SR MIC STUB XXX 60CM W/OSTK PFC GYR SR STIC STUB XXX 90CM W/OSTK BC GYR SR STIC STUB XXX 90CM W/OSTK PFC GYR SR MIC STUB XXX 90CM W/OSTK BC GYR SR MIC STUB XXX 90CM W/OSTK PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. GyroNet SR & SRD 49

50 GYRONET UD UPSIDE DOWN APPLICATIONS For application where sprinklers are mounted inverted to keep the ground clear and prevent damage to the sprinklers by harvesters and machinery. SPECIFICATIONS Special designed upside down rotor. Micro-sprinkler, 3 different flow rates: 40, 58, 70 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 2 types of inlet connectors: Self tapping Press fit Upper bearing: A specially designed spring bearing keeps the anti-ant feature even when the sprinkler is mounted in an up side down position. Spring upper bearing with Everspin feature to improve wear resistance under harsh condition. The rotor is colored Green. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-sprinklers nozzle. Micro-sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service, simple, modular parts. 50

51 GYRONET TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) CONSTANT K EXPONENT X MAXIMUM WORKING PRESSURE (BAR) WETTED DIAMETER (M) UD 50 CM ABOVE GROUND SWIVEL (ROTOR) CODE COLOR 040 Blue Green 058 Gray Green 070 Black Green PACKAGING DATA GYRONET UD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 30 cm tube length with stabilizer x 28 x Complete stand, 60 cm tube length with stabilizer x 34 x Complete stand, 90 cm tube length with stabilizer x 27 x GYRONET UD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR UPPER BEARING FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES GyroNet GYR Upside down swivel UD Press fit male Self tapping MIC STIC Spring Spring Everspin SPUB SPES 40 l/h l/h l/h 070 Head only Head + 60 cm microtube Head + 90 cm microtube HEAD ONLY 60CM W/OSTK 90CM W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C AD valve 1.5/0.7 bar AD15 Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. GYR UD GyroNet UD 51

52 GYRONET UD head only with Standard upper bearing Catalog number : (any of below 6 digits) MODEL STIC MIC GyroNet UD STIC, self tapping inlet connector GYRONET UD head only with Spring upper bearing Catalog number : (any of below 6 digits) MODEL STIC MIC GyroNet UD MIC, press fit, male inlet connector GYRONET UD assembly stands Catalog number : (any of below 6 digits) MODEL GYR UD STIC STUB XXX 30CM W/STB PFC GYR UD STIC STUB XXX 60CM W/STB PFC GYR UD MIC STUB XXX 30CM W/STB PFC GYR UD MIC STUB XXX 60CM W/STB PFC Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 52 GyroNet UD

53 Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SuperNet UD 53

54 GYRONET JET APPLICATIONS Designed for harsh water containing large amounts of sand thus causing excessive wear of standard rotating swivel. SPECIFICATIONS A static emitter. Micro-emitter, 5 different flow rates: 40, 58, 70, 90, 120 l/h. Nominal flow rates at 1.7 bar pressure. Maximum recommended working pressure: 2.5 bar. Recommended filtration: 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 2 types of inlet connectors: Self tapping Press fit Upper bearing: Special type of upper bearing (square hole) holds the rotor from spinning 5 types of static deflectors: 360 degrees (12 jets ) 300 degrees (10 Jets) 2x90 (butterfly) (8 jets) 180 degrees (6 jets) 90 degrees (4 jets) All deflectors are colored Orange. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the micro-emitters nozzle. Static-emitter made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for fruit trees, orchards, deciduous and other tree crops. Long-term reliable service, simple, modular parts. 54

55 GYRONET TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) CONSTANT K EXPONENT X MAXIMUM WORKING PRESSURE (BAR) 360 DEGREES 12 JETS WETTED RADIUS (M) 20 CM ABOVE GROUND 300 DEGREES 10 JETS BUTTERFLY 2*4 JETS 180 DEGREES 6 JETS 90 DEGREES 4 JETS DEFLECTOR CODE COLOR 040 Blue Orange 058 Gray Orange 070 Black Orange 090 Orange Orange 120 Red Orange PACKAGING DATA GYRONET JET QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand (60 cm) w/stake x 34 x Complete stand (60 cm) w/o stake x 34 x Complete stand (90 cm) w/stake x 27 x Complete stand (90 cm) w/o stake x 27 x GYRONET JET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER GyroNet JET GYR DISPERSION DEFLECTOR 12 jets, 360 degrees 10 jets, 300 degrees 8 jets, 2 x 90 degrees 6 jets, 180 degrees 4 jets, 90 degrees 12J 10J 8J 6J 4J HEAD INLET CONNECTOR Press fit male Self tapping MIC STIC UPPER BEARING Standard STUB FLOW 40 l/h l/h l/h l/h l/h 120 STAND ASSEMBLY Head only Head + 60 cm microtube + Stake Head + 60 cm microtube Head + 90 cm microtube + Stake Head + 90 cm microtube HEAD ONLY 60CM W/STK 60CM W/OSTK 90CM W/STK 90CM W/OSTK CONNECTOR TO LATERAL Barb Press fit 3/8" conic press fit BC PFC 3/8C ACCESSORIES AD valve 1.5/0.7 bar AD15 Head + XXX cm microtube + Stake STL W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. GYR STUB GyroNet Jet 55

56 GYRONET JET 12 jets, head only Catalog number : (any of below 6 digits) MODEL STIC MIC GyroNet Jet MIC, press fit, male inlet connector GYRONET JET 10 jets, head only Catalog number : (any of below 6 digits) MODEL STIC MIC GyroNet Jet STIC, self tapping inlet connector GYRONET JET 8 jets, head only Catalog number : (any of below 6 digits) MODEL STIC MIC GYRONET JET 6 jets, head only Catalog number : (any of below 6 digits) MODEL STIC MIC GYRONET JET 4 jets, head only Catalog number : (any of below 6 digits) MODEL STIC MIC GYRONET JET assembly stands Catalog number : (any of below 6 digits) MODEL GYR JET 12 JET MIC STUB XXX 60CM W/STK BC GYR JET 10 JET MIC STUB XXX 60CM W/STK BC GYR JET 8 JET (2*90) MIC STUB XXX 60CM W/STK BC GYR JET 6 JET MIC STUB XXX 60CM W/STK BC GYR JET 4 JET MIC STUB XXX 60CM W/STK BC Missing catalog numbers available upon request. Background color defines the code color of the respective deflector. All assembly stands include 4*6.5 mm black SPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 56 GyroNet Jet

57 GYRONET COMPONENTS STANDARD UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL GYRONET MICRO- SPRINKLERS STANDARD UPPER BEARING SQUARE HOLE - TO BE USED ON ALL GYRONET MICRO-JETS (GRAY) EVERSPIN UPPER BEARING CIRCULAR HOLE - TO BE USED ON ALL GYRONET MICRO- SPRINKLERS IN HARSH WATER CONDITIONS SPRING UPPER BEARING CIRCULAR HOLE - TO BE USED ON UD GYRONET MICRO- SPRINKLERS 1 unit unit unit unit units/bag units/bag units/bag units/bag FRAME 1 unit units/bag units/bag STREAM SPLITTER 1 unit units/bag 100 units/bag SPRING EVERSPIN UPPER BEARING - TO BE USED ON UD GYRONET MICRO- SPRINKLERS IN HARSH WATER CONDITIONS 1 unit units/bag LR SWIVEL (PURPLE) TO BE USED WITH 27, 40 L/H LR SWIVEL (BLACK) TO BE USED WITH 58, 70, 90, 120 L/H SR SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit unit unit units/bag units/bag units/bag units/bag units/bag units/bag LRD SWIVEL (PURPLE) TO BE USED WITH 27, 40 L/H LRD SWIVEL (BLACK) TO BE USED WITH 58, 70, 90, 120 L/H SRD SWIVEL (BLUE) TO BE USED WITH ALL FLOWS 1 unit unit unit units/bag units/bag 10 units/bag 100 units/bag units/bag units/bag UD SWIVEL (GREEN) W/SLEEVE TO BE USED WITH 40, 58, 70 L/H 1 unit units/bag units/bag GYRONET BODY NOZZLES MALE (PRESS-FIT) INLET CONNECTOR LR SWIVEL (GRAY) TO BE USED WITH 150, 200, 250, 300 L/H 1 unit units/bag units/bag SELF-TAPPING INLET CONNECTOR 3/8" THREADED MALE INLET CONNECTOR STATIC DEFLECTORS TO BE USED WITH 40, 58, 70, 90, 120 L/H 1 unit 100 units/bag 12 jets (360 degrees) jets (300 degrees) jets (2*90 degrees) jets (180 degrees) jets (90 degrees) l/h, Brown N/A 40 l/h, Blue N/A 58 l/h, Gray N/A 70 l/h, Black l/h, Orange l/h, Red l/h, Sky Blue l/h, Yellow N/A l/h, Purple N/A l/h, Green N/A GyroNet 57

58 VIBRONET SD APPLICATIONS Orchards, deciduous and tree crops irrigation. SPECIFICATIONS Bridgeless micro emitter with vibrating action. Micro-emitter, 3 different flow rates: 30, 50, 70 l/h. Nominal flow rates at 1.5 bar pressure. Recommended working pressure: bar. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Inlet connector: press fit. FEATURES AND BENEFITS Excellent uniformity distribution as a single emitter. Operation of this emitter is based on vibration. Water passage through the nozzle causes needle vibration which in turn breaks up the water jet into uniform droplets that are evenly spread. Large drops suitable for open field conditions. No mist / wind-borne small drops. Relatively small wetting diameter, suits especially densely planted fruit tree crops. Constantly self-cleaning, the vibrating system does not allow for build up of mineral deposits in the nozzle. Micro-emitter made of plastic materials resistant to all agrochemicals & weather conditions. 58

59 VIBRONET SD TECHNICAL DATA MODEL FLOW RATE NOZZLE CODE COLOR PIN CODE COLOR NOZZLE WATER PASSAGES AREA NOZZLE SMALLER WATER PASSAGES CONSTANT EXPONENT WETTED DIAMETER (M) 20 CM ABOVE GROUND* (L/H)* (MM²) (MM) K X Green + Sky Blue Light Gray Green + Light Gray Orange Black + Black Orange * at 1.5 bar working pressure PACKAGING DATA VIBRONET SD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x VIBRONET SD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES VibroNet SD VBN SD Press fit MIC 30 l/h l/h 050 Head only Head + 60 cm microtube HEAD ONLY 60CM W/OSTK Barb Press fit BC PFC AD valve 1.5/0.7 bar AD15 70 l/h 070 Head + 90 cm microtube 90CM W/OSTK 3/8" conic press fit 3/8C Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. VBN SD MIC VIBRONET SD Head only (with male inlet connector) Catalog number: (any of below 6 digits ) MODEL VibroNet SD VibroNet SD assembly stand (sample) VBN SD 70L/H 60CM W/STAKE CLIP BC VBN SD 50L/H 60CM W/STAKE CLIP BC VibroNet SD 59

60 CONNECTORS AND STAND ACCESSORIES SUPERNET STAKE CLAMP FOR WOOD POLES ADAPTER TO METAL/ FIBERGLASS RODS mm rod (Blue) mm rod (Black) Colored Blue Colored Brown Colored Black UNIVERSAL STAKE CLAMP FOR METAL STAKES CLIP STAKE METAL ROD 6.0 mm dia., 60 cm length mm dia., 100 cm length mm dia., 120 cm length mm dia., 60 cm length Colored Blue Colored Black Colored Brown Colored Blue Colored Black mm dia., 100 cm length mm dia., 120 cm length UNIVERSAL ADAPTER TO METAL/FIBERGLASS ROD ADAPTER BARB/FEMALE PRESS-FIT Adapter barb (for 6*8 mm tube) / female press-fit connector Adapter barb (for 9*12 mm tube) / female press-fit connector To 4.5 mm dia. rod, 4*6.5 mm micro-tube, colored black To 6.0 mm dia. rod, 4*6.5 mm micro-tube, colored blue To 8.0 mm dia. rod, 4*6.5 mm micro-tube, colored black To 6.0 mm dia. rod, 6*8 mm micro-tube, colored blue To 6.0 mm dia. rod, 9*11/9*12 mm micro-tube, colored blue To 8.0 mm dia. rod, 9*11/9*12 mm micro-tube, colored black ADAPTER FEMALE THREADED/ FEMALE PRESS-FIT 1/2" female threaded / female press-fit conn /4" female threaded / female pressfit conn ADAPTER BARB-3/8" FEMALE THREADED Barb (for 9*11/9*12 mm tube ) / 3/8" female threaded Accessories

61 BARB/MALE PRESS-FIT CONNECTOR (BLACK) BARBED, PRESSURE MEASURING POINT BARB/FLAT FEMALE PRESS-FIT CONNECTOR BARB/BARB CONNECTOR (BLACK) 1/4" UNF MALE THREADED, PRESSURE MEASURING POINT ON A PVC PIPE, DRILL: 5.2 MM SCREW-TAP: 1/4-28 UNF PLUG (BLUE) BARB/SELF TAPPING CONNECTOR (BLACK) /8" BSP MALE THREADED, PRESSURE MEASURING POINT ON A PVC PIPE, DRILL: 8.5 MM SCREW-TAP: 1/8-28 BSP MALE THREADED / FEMALE PRESS-FIT 3/8" Threaded male/ female conn /2" Threaded male/ female conn SELF TAPPING/SELF TAPPING CONNECTOR (BLACK) FLARE/FLARE COUPLING CONNECTOR START CONNECTOR BARB/FEMALE Fit 9*11/9*12 mm micro-tube 100 units/ bag Barb to be connected to a PE distributor pipe/ Flare connector to a 9*11/9*12 mm microtube 100 units/bag BARB/FEMALE PRESS-FIT CONNECTOR (BLACK) "U" SHAPE FOR UPRIGHT HANGING SUPERNET AND GYRONET NOZZLE CLEANING TOOL Accessories 61

62 PC SPRAY STAKES PRESSURE COMPENSATED SPRAY STAKE APPLICATIONS For all mini-spray nurseries and greenhouses applications. SPECIFICATIONS High flow rates to supply correct irrigation in large pots/growing bags. PC spray stake is ideal for any application in which a soil wetting mini spray pattern is desired. PC spray stake is manufactured with UV resistant resin to provide years of trouble-free service in both indoor and outdoor applications. Optional CNL (anti drain system). 2 spray patterns adaptable to suit every substrate surface or container. Recommended filtration: 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. FEATURES AND BENEFITS Pressure compensated flow ensuring constant flow rate at varying inlet pressures. Optional CNL: When pressure in the pipes drops (after valves shut off at the end of an irrigation cycle) and the desired pressure is achieved, the CNL mechanism closes the water passage. The pipes remain full of water and ready for the next cycle. Ensures uniform water and nutrient distribution during irrigation. Allows the installation of spray stake systems in areas with steeper slopes. Uniform wetting pattern over the entire surface. Horizontal connection. Water flow blockage mechanism to function when a pot is sold and/ or shifted from position to prevent water and fertilizer loss. Pre-assembled components for easy of use. Excellent performance. 62

63 PC SPRAY STAKE COMPONENTS NOMINAL FLOW RATE (L/H)* PACKAGING DATA SPRAY STAKE COLOR CODE SPREAD DESCRIPTION AVERAGE WETTED RADIUS (M)** FLOW REGULATOR CODE COLOR 12 Fuchsia One side Fuchsia + Black 20 Gray One side Orange + Black 20 Light Gray Two sides Orange + Black 25 Gray One side Orange + Light Gray 25 Light Gray Two sides Orange + Light Gray 30 Brown One side Orange + Brown 30 Light Brown Two sides Orange + Brown 35 Blue One side Orange + Light Blue 35 Light Blue Two sides Orange + Light Blue 40 Blue One side Orange + Blue 40 Light Blue Two sides Orange + Blue * Within pressure range bar ( bar in the 40 l/h model) **To each side, wetted radius will change at different height above ground of the spray head QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET x 28 x PC SPRAY STAKES ASSEMBLY, PCJ HF YY l/h, 3*5 mm micro-tube 100 cm length, elbow adapter Catalog number : (any of below 6 digits) PCJ MODEL PC SPRAY STAKE WATER DISTRIBUTION 1 UNIT 12 l/h Fuchsia One side l/h Gray One side l/h Light Gray Two sides l/h Gray One side l/h Light Gray Two sides l/h Brown One side l/h Light Brown Two sides l/h Blue One side l/h Light Blue Two sides l/h Blue One side l/h Light Blue Two sides *Can be ordered with different micro-tube lengths PC-CNL SPRAY STAKES ASSEMBLY, PCJ-CNL HF YY l/h, 3*5 mm micro-tube 100 cm length, elbow adapter Catalog number : (any of below 6 digits) PCJ MODEL PC SPRAY STAKE WATER DISTRIBUTION 1 UNIT 12 l/h Fuchsia One side l/h Gray One side l/h Light Gray Two sides l/h Gray One side l/h Light Gray Two sides l/h Brown One side l/h Light Brown Two sides l/h Blue One side l/h Light Blue Two sides l/h Blue One side l/h Light Blue Two sides *Can be ordered with different micro-tube lengths PC Spray Stakes 63

64 SPRAY STAKE APPLICATIONS Greenhouses, nurseries, garden pot irrigation. SPECIFICATIONS Maximal working pressure: 2.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Made of durable plastic with high levels of UV inhibitors. Available in three colors for easy identification of flow rates: 12 l/h Yellow 17 l/h Green 22 l/h Black Container size recommendations: 12 to 20 liters - Yellow Spray Stake 20 to 40 liters - Green Spray Stake 40 to 120 liters - Black Spray Stake To be inserted" into a 3*5 mm micro-tube. FEATURES AND BENEFITS Allow distribution of water over relatively large pot plant areas. Netafim Spray Stakes now have a spray direction indicator for faster, accurate installations. The directional indicator provides a hand-feel as well as visual cue to the spray direction so installers don't need to stop and study each stake to ensure proper spray direction. Netafim Spray Stakes feature close-off capabilities that are simple and quick, remove the tubing from the top of the Spray Stake and attach the tubing to the close-off nipple located on the side of the stake.. This eliminates dirt getting jammed into the tubing and provides a highly visible cue that the stake is closed, not open. Allows maximum flexibility in greenhouse and nurseries (with soft PE micro-tubes). Allows installation with Netafim On line PC drippers, to add compensated and anti-drain functionality. 64

65 SPRAY STAKE TECHNICAL DATA MAXIMUM WORKING PRESSURE (BAR) NOMINAL FLOW RATE (L/H)* WATER PASSAGES DIMENSIONS** WIDTH (MM) DEPTH (MM) LENGTH (MM) CONSTANT K EXPONENT X * At 1.0 bar pressure **The Spray Stake water passages has a triangular shape PACKAGING DATA STAKE MODEL NOMINAL FLOW (L/H) QUANTITY UNITS DIMENSIONS (CM X CM X CM) BOX WEIGHT (KG) Yellow x 28 x Green x 28 x Black x 28 x SPRAY STAKES Catalog number : (any of below 6 digits ) MODEL 1 UNIT SPRAY STAKES ACCESSORIES Butterfly stopper Extension unit 1 unit /bag unit /bag Spray Stakes 65

66 SPINNET BRIDGELESS MICRO-SPRINKLER APPLICATIONS Greenhouses, Nurseries, Net-houses. SPECIFICATIONS Bridgeless design. Micro-sprinkler, 6 different flow rates: 50, 70, 90, 120, 160, 200 l/h. Nominal flow rates at 2.3 bar pressure. Recommended working pressure: 2.0 up to 3.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Inlet connector: Press fit. 3 different rotors: LR - High trajectory, colored Green FLT - Flat distributor, colored Gray SR - Low trajectory, colored Blue SpinNet micro-sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS SpinNet micro-sprinklers are constructed without a "bridge" to retain the spinner, producing a drip-less operation. This means that plants located below the sprinklers are not damaged from water dripping off the sprinkler. SpinNet hangs below the supply pipe preventing wetting of the pipe and dripping onto the plants below. Interchangeable components. SpinNet micro-sprinklers can be disassembled by hand should they need cleaning - no tools are required. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Excellent uniformity distribution on a full coverage irrigation system. Strongly recommended to connect the SpinNet to the distribution pipe with a SSPE (super soft PE) micro-tube, a specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage. 66

67 SPINNET TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) RECOMMENDED WORKING PRESSURE (BAR) CONSTANT K EXPONENT X WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR LR WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR FTL WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR SR 050 Green to N/A N/A N/A N/A 6.0 Blue 070 Black to Green 7.5 Gray 6.5 Blue 090 Orange to Green 8.5 Gray 6.5 Blue 120 Red to Green 8.5 Gray 6.5 Blue 160 Brown to Green 9.0 Gray 6.5 Blue 200 Yellow to Green 9.0 Gray 7.0 Blue **The wetted diameter was measured at 1.5 meters height and at 2.5 bar working pressure PACKAGING DATA SPINNET QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 15 cm tube w/stabilizer and AD valve x 28 x Complete stand, 30 cm tube w/stabilizer and AD valve x 28 x Complete stand, 60 cm tube w/stabilizer and AD valve x 34 x Complete stand, 90 cm tube w/stabilizer and AD valve x 27 x SPINNET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SpinNet SPNT High trajectory Flat distribution Low trajectory LR FLT SR Press fit male MIC 50 l/h l/h l/h l/h l/h l/h 200 Head only Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer HEAD ONLY 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB Barb Press fit 3/8" conic press fit M11 press fit BC PFC 3/8C M11C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD15 AD20 *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray SPNT MIC SpinNet 67

68 SPINNET Head only Catalog number: (any of below 6 digits) MODEL LR FLT SR 1 Unit 100 Units/bag 1 Unit 100 Units/bag 1 Unit 100 Units/bag 050 N/A N/A N/A N/A SpinNet LR, green swivel SPINNET Head + AD valve 20 Catalog number : (any of below 6 digits) SpinNet FLT, gray swivel MODEL LR FLT SR 050 N/A N/A SpinNet SR, Blue swivel SPINNET ASSEMBLY STANDS SpinNet, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SPINNET ASSEMBLY STANDS SpinNet, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe and AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe and AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe and AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet

69 SpinNet, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 20,Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, SR swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, SR swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer,press-fit connector to lateral pipe and AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, SR swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, SR swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPINNET COMPONENTS SPINNET BODY NOZZLE 50 l/h, Green l/h, Black l/h, Orange l/h, Red l/h, Brown l/h, Yellow SPINNET DISTRIBUTION MECHANISM LR, long range distribution model, Green swivel FLT, flat distribution model, Gray swivel SR, short range distribution model, Blue swivel SpinNet 69

70 SPINNET SD BRIDGELESS MICRO-SPRINKLER WITH SHOULDER DISTRIBUTOR APPLICATIONS Greenhouses, Nurseries, Tunnels. SPECIFICATIONS Micro-sprinkler with a specifically designed connector SD (shoulder distributor) that achieves excellent results when rectangular irrigation is needed. Bridgeless design. Micro-sprinkler, 6 different flow rates : 090/050, 120/070, 160/070, 160/090, 200/090, 200/120 l/h. Nominal flow rates at 2.0 bar pressure. Recommended working pressure: 2.0 up to 3.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Inlet connector: Press fit. 3 different rotors: LR - High trajectory, colored Green FLT - Flat distributor, colored Gray SR - Low trajectory, colored Blue FEATURES AND BENEFITS Bridgeless design eliminates dripping. Interchangeable components. SpinNet SD micro-sprinklers can be disassembled by hand should they need cleaning - no tools are required. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Excellent uniformity distribution on a single irrigation line. Traditional sprinkler layout spaces the sprinklers "head to head" or at spacing equal to the radius of the sprinkler throw. For larger areas, the patterns are overlapped.the SpinNet SD solution avoids the problems of the traditional sprinkler layout and achieves a high level of uniformity within a closely spaced "strip of sprinklers". Specially designed to fully cover rectangular areas with excellent uniformity distribution and high percentage of the water within the required rectangular area. Strongly recommended to connect the SpinNet SD to the distribution pipe with a SSPE (super soft PE) micro-tube, a specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage. 70

71 SPINNET SD TECHNICAL DATA MODEL NOMINAL FLOW RATE * (L/H) NOZZLE CODE COLOR NOZZLE SIZE (MM) SD CONN NOZZLE SIZE (MM) CONSTANT K EXPONENT X RECOMMENDED WORKING PRESSURE (BAR) 090/ Orange + Orange to / Red + Red to / Brown + Red to / Brown + Brown to / Yellow + Brown to / Yellow + Yellow to 3.0 *Nominal flow rate at 2.0 bar MODEL NOZZLE CODE COLOR WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR LR MODEL WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR FLT MODEL WETTED DIAMETER (M)** SWIVEL (ROTOR) CODE COLOR SR MODEL 090/050 Orange + Orange N/A N/A N/A N/A 5.5 Blue 120/070 Red + Red 7.5 Green 7.5 Gray 6.0 Blue 160/070 Brown + Red 6.5 Green 6.0 Gray 5.5 Blue 160/090 Brown + Brown 7.0 Green 6.5 Gray 5.5 Blue 200/090 Yellow + Brown 6.5 Green 6.5 Gray 5.5 Blue 200/120 Yellow + Yellow 8.0 Green 7.5 Gray 6.5 Blue **The wetted diameter was measured at 1.5 meters height and at 2.5 bar working pressure PACKAGING DATA SPINNET SD QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head & SD connector x 34 x Complete stand (30 cm) w/stabilizer & AD valve x 28 x Complete stand (60 cm) w/stabilizer & AD valve x 34 x SPINNET SD Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES SpinNet SD SPNT SD High trajectory Flat distribution Low trajectory LR FLT SR Press fit male MIC 90/50 l/h /70 l/h /70 l/h /90 l/h /90 l/h /120 l/h Head only Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer HEAD ONLY 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB Barb Press fit 3/8" conic press fit M11 press fit BC PFC 3/8C M11C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD15 AD20 *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray SPNT SD MIC SpinNet SD 71

72 SPINNET SD Head only Catalog number: (any of below 6 digits) MODEL LR FLT SR 1 Unit 25 Units/bag 1 Unit 25 Units/bag 1 Unit 25 Units/bag N/A N/A N/A N/A SpinNet SD LR, green swivel SPINNET SD Head + AD valve 20 Catalog number : (any of below 6 digits) SpinNet SD FLT, gray swivel MODEL LR FLT SR 1 Unit 25 Units/bag 1 Unit 25 Units/bag 1 Unit 25 Units/bag N/A N/A SpinNet SD SR, Blue swivel SPINNET SD ASSEMBLY STANDS SpinNet SD, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SPINNET SD ASSEMBLY STANDS SpinNet SD, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet, UD stand, LR swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet SD

73 SpinNet SD, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet SD, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 20, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet SD, UD stand, SR swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20,Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet SD, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet SD, UD stand, FLT swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 15, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM SpinNet SD, UD stand, SR swivel, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 20,Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM Missing catalog numbers available upon request. Background color defines the code color of the respective swivel. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. SPINNET SD COMPONENTS SPINNET BODY NOZZLE SPINNET SD (SHOULDER DISTRIBUTOR) DEVICE 90 l/h, Orange l/h, Red l/h, Brown l/h, Yellow /050 Orange /070 Red /090 Brown /120 Yellow SPINNET DISTRIBUTION MECHANISM LR, long range distribution model, Green swivel FLT, flat distribution model, Gray swivel SR, short range distribution model, Blue swivel SpinNet SD 73

74 VIBRONET APPLICATIONS Germination tables. SPECIFICATIONS Bridgeless micro emitter with vibrating action. Micro-emitter, 2 different flow rates: 40, 50 l/h. Nominal flow rates at 3.0 bar pressure. Recommended working pressure: 3.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Inlet connector: press fit. FEATURES AND BENEFITS Excellent uniformity distribution on a full coverage irrigation system. Operation of this emitter is based on vibration, water passage through the nozzle causes needle vibration which in turn breaks up the water jet into uniform droplets that are evenly spread. Constantly self-cleaning, the vibrating system does not allow for build up of mineral deposits in the nozzle. Micro-emitter made of plastic materials resistant to all agrochemicals & weather conditions. Strongly recommended to connect the VibroNet to the distribution pipe with a SSPE (super soft PE) micro-tube, a purpose-designed weight and AD valve (anti-drain) to prevent distribution pipe drainage. 74

75 VIBRONET TECHNICAL DATA MODEL FLOW RATE (L/H)* NOZZLE CODE COLOR PIN CODE COLOR NOZZLE WATER PASSAGES AREA (MM²) RECOMMENDED WORKING PRESSURE (BAR) CONSTANT K EXPONENT X WETTED DIAMETER 150 CM ABOVE GROUND* (M) Blue Gray Green Gray * at 3.0 bar working pressure PACKAGING DATA VIBRONET QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 28 x Complete stand, 15 cm tube w/stabilizer and AD valve x 28 x Complete stand, 30 cm tube w/stabilizer and AD valve x 28 x Complete stand, 60 cm tube w/stabilizer and AD valve x 34 x Complete stand, 90 cm tube w/stabilizer and AD valve x 27 x VIBRONET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES VibroNet VBN Press fit male MIC 40 l/h l/h 050 Head only Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer HEAD ONLY 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB Barb Press fit 3/8" conic press fit M11 press fit BC PFC 3/8C M11C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD15 AD20 AD30 *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray VBN MIC VibroNet 75

76 VIBRONET Head only Catalog number : (any of below 6 digits) MODEL 1 UNIT 25 UNIT/BAG VibroNet VIBRONET Head + AD valve 20 Catalog number : (any of below 6 digits) MODEL 1 UNIT 25 UNIT/BAG VIBRONET ASSEMBLY STANDS VibroNet, UD stand, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 20 Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM VibroNet, UD stand, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 20 Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM VibroNet, UD stand, Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 15 Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM VibroNet, UD stand, Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 15 Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM Missing catalog numbers available upon request. Background color defines the code color of the respective pin. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. 76 VibroNet

77 VIBRONET COMPONENTS VIBRONET BODY VIBRONET "O" RING Catalog Number: Catalog Number: VIBRONET NOZZLE MECHANISM 040 Blue + Gray pin Green + Gray pin VibroNet 77

78 COOLNET PRO SUPER-FINE MISTER APPLICATIONS Super-fine static mister especially designed for cooling and humidifying greenhouses and livestock, and for irrigating over rooting tables. SPECIFICATIONS Bridgeless design. Static mister, 3 different flow rates: 5.5, 7.5, 14.0 l/h and a plugged nozzle. Nominal flow rates at 4.0 bar pressure. Pressure range bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Inlet connector: Press fit 3 different configurations: Cross, 4 nozzles "T", 2 nozzles Straight, 1 nozzle The nozzles are code color colored: 5.5 l/h Light Green 7.5 l/h Silver Gray 14.0 l/h Sky Blue Plugged nozzle: Orange FEATURES AND BENEFITS Bridgeless design eliminates dripping. Interchangeable components. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Micro sized droplets, at a relatively low pressure of 4.0 bar the CoolNet Pro uniformly distributes an average drop size of 65 micron. Specially designed for cooling, humidifying and rooting tables. Strongly recommended to connect the CoolNet Pro to the distribution pipe with a SSPE (super soft PE) micro-tube, a specifically designed stabilizer and AD valve (anti-drain) that will prevent distribution pipe drainage. 78

79 COOLNET PRO TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) RECOMMENDED WORKING PRESSURE (BAR) CONSTANT K EXPONENT X 055 Light Green to Silver Gray to Sky Blue to PACKAGING DATA COOLNET PRO QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head, cross unit with male conn x 34 x Complete stand (30 cm) w/stabilizer & AD valve x 28 x Complete stand (60 cm) w/stabilizer & AD valve x 34 x Head, T unit with male conn x 28 x Complete stand (30 cm) w/stabilizer & AD valve x 28 x Complete stand (60 cm) w/stabilizer & AD valve x 34 x Head, one outlet x 34 x COOLNET PRO Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER NOZZLE'S NUMBER HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES CoolNet Pro CoolPro One straight Two on a "T" Four on a cross "S" "T" "C" Press fit male MIC 5.5 l/h l/h l/h 140 Head only Head + 15 cm microtube + Stabilizer Head + 30 cm microtube + Stabilizer Head + 60 cm microtube + Stabilizer Head + 90 cm microtube + Stabilizer Head + XXX cm microtube + Stabilizer HEAD ONLY 15CM W/STB 30CM W/STB 60CM W/STB 90CM W/STB XXXCM W/STB Barb Press fit 3/8" conic press fit M11 press fit BC PFC 3/8C M11C AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD valve 4.0/1.8 bar AD20 AD30 AD40 *When selecting an undefined tube length, add the desired length in writing. ** standard supplied micro-tube : 4*6.5 SSPE colored light gray COOLPRO MIC CoolNet Pro 79

80 COOLNET PRO Head only (with male inlet connector) Catalog number: (any of below 6 digits ) SINGLE TEE CROSS MODEL "S" "T" "C" CoolNet Pro Single COOLNET PRO head + AD valve 40 Catalog number: (any of below 6 digits ) MODEL SINGLE TEE CROSS "S" "T" "C" CoolNet Pro Tee CoolNet Pro Cross COOLNET PRO ASSEMBLY STANDS CoolNet Pro, UD stand, model "S", Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 40, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM CoolNet Pro, UD stand, model "S", Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 40, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM CoolNet Pro, UD stand, model "T", Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 40, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM CoolNet Pro, UD stand, model "T", Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 40, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM CoolNet Pro

81 CoolNet Pro, UD stand, model "C", Flow YYY, micro-tube length XXX, stabilizer, barb connector to lateral pipe, AD valve 40, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM CoolNet Pro, UD stand, model "C", Flow YYY, micro-tube length XXX, stabilizer, press-fit connector to lateral pipe, AD valve 40, Catalog number : (any of below 6 digits) MODEL 15 CM 30 CM 60 CM 90 CM Missing catalog numbers available upon request. All assembly stands include 4*6.5 mm gray SSPE micro-tube. Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement. CoolNet Pro 81

82 MISTNET APPLICATIONS Fine static mister especially designed for under canopy cooling and humidifying greenhouses. SPECIFICATIONS Bridgeless design eliminates dripping. Static mister, 2 flow rates: 15, 25 l/h. Nominal flow rates at 2.7 bar pressure. Pressure range 2.5 to 5.0 bar. Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Inlet connectors: Press fit the nozzles are code color colored: 15.0 l/h Yellow 25.0 l/h Brown FEATURES AND BENEFITS Bridgeless design eliminates dripping. Interchangeable components. Acid resistant (AA) raw materials, thus allowing the application chemicals to pass through the system. The system can be cleaned by application of suitable acid treatments. Micro sized droplets, at a relatively low pressure of 3.0 bar the MistNet uniformly distributes an average drop size of 150 micron. Specially designed for under canopy cooling and humidifying systems. 82

83 MISTNET TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE DIA. (MM) CONSTANT K EXPONENT X RECOMMENDED WORKING PRESSURE (BAR) 015 Yellow Brown PACKAGING DATA MISTNET QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 34 x Complete stand, 60 cm tube w/stake x 34 x Complete stand, 60 cm tube w/o stake x 34 x Complete stand, 90 cm tube w/stake x 27 x Complete stand, 90 cm tube w/o stake x 27 x MISTNET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL ACCESSORIES MistNet MistNet Press fit male MIC 15 l/h l/h 025 Head only Head + 60 cm microtube + Stake Head + 60 cm microtube HEAD ONLY 60CM W/STK 60CM W/OSTK Barb Press fit 3/8" conic press fit BC PFC 3/8C AD valve 1.5/0.7 bar AD valve 2.0/0.9 bar AD valve 3.0/1.5 bar AD15 AD20 AD30 Head + 90 cm microtube + Stake 90CM W/STK Head + 90 cm microtube 90CM W/OSTK Head + XXX cm microtube + Stake STL W/STK Head + XXX cm microtube STL W/OSTK *When selecting an undefined tube length, add the desired length in writing. MISTNET MIC MISTNET Head only (with male inlet connector) Catalog number: (any of below 6 digits ) SINGLE SINGLE MODEL "S" "S" 100units/bag MistNet Missing catalog numbers available upon request Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement MistNet 83

84 COOLNET PRO AND MISTNET COMPONENTS COOLNET PRO CROSS BODY COOLNET PRO "T" BODY COOLNET PRO AND MISTNET "S" BODY COOLNET PRO NOZZLE COOLNET PRO PLUGGED NOZZLE MISTNET NOZZLE 5.5 Light Green: Silver Gray: Sky Blue: Plugged nozzle, Orange: Yellow: Brown: COOLNET PRO AND MISTNET "O" RING COOLNET PRO AND MISTNET DIFFUSER MALE/MALE CONNECTOR, COLORED LIGHT GRAY

85 MICRO-SPRINKLERS AND MICRO-EMITTERS UPSIDE-DOWN STANDS COMPLEMENTARY ACCESSORIES AD VALVE, MALE/FEMALE Blue pin 1.5 bar/0.7 bar Purple pin 2.0 bar/0.9 bar Green pin 3.0 bar/1.5 bar Orange pin 4.0 bar/1.8 bar AD VALVE, BARB/BARB Blue pin 1.5 bar/0.7 bar Purple pin 2.0 bar/0.9 bar Green pin 3.0 bar/1.5 bar Orange pin 4.0 bar/1.8 bar AD VALVE, 3/8" CONIC THREADED/BARB Blue pin 1.5 bar/0.7 bar Purple pin 2.0 bar/0.9 bar Green pin 3.0 bar/1.5 bar Orange pin 4.0 bar/1.8 bar AD VALVE, 3/8" CONIC THREADED/BARB + ASSEMBLY FINGER FILTER Blue pin 1.5 bar/0.7 bar Purple pin 2.0 bar/0.9 bar Green pin 3.0 bar/1.5 bar Orange pin 4.0 bar/1.8 bar STABILIZER BARB/FEMALE CONNECTOR (GRAY) BARB/MALE CONNECTOR (GRAY) BARB/BARB CONNECTOR (GRAY) MALE/MALE CONNECTOR (GRAY) /8" CONIC THREADED/ FEMALE CONNECTOR (GRAY) M11 THREADED/FEMALE CONNECTOR (GRAY) + ASSEMBLY FINGER FILTER PLUG (BLUE) BARBED PRESSURE MEASURING POINT /4" UNF MALE THREADED, PRESSURE MEASURING POINT. ON A PVC PIPE, DRILL: 5.2 MM SCREW-TAP: 1/4-28 UNF /8" BSP MALE THREADED, PRESSURE MEASURING POINT. ON A PVC PIPE, DRILL: 8.5 MM SCREW-TAP: 1/8-28 BSP SCREEN FILTER CONNECTOR "T" FEMALE/FEMALE/ FEMALE (GRAY) FINGER FILTER 3/8" CONIC THREADED/ FEMALE CONNECTOR (GRAY) + ASSEMBLY FINGER FILTER MALE/MALE ADAPTER TO "DAN" STANDS (BLUE) BARB/FLAT FEMALE CONNECTOR M11 THREADED/FEMALE CONNECTOR (GRAY) FEMALE/FEMALE ADAPTER TO "DAN" STANDS (BLUE)

86 GYRONET TURBO APPLICATIONS Closed and open-air nurseries. Intensive field crops. Overhead cooling. Roof and tunnel cooling and dust cleaning. SPECIFICATIONS Very robust micro-sprinkler. Micro-sprinkler, 5 different flow rates: 200, 250, 300, 400, 500 l/h. Nominal flow rates at 2.2 bar pressure. Maximum recommended working pressure: 3.0 bar. Recommended filtration : 200 micron / 80 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. Inlet connector: 1/2" threaded male The rotor is colored Purple. FEATURES AND BENEFITS Anti-ant mechanism prevents insect penetration into the area of the sprinklers nozzle. Sprinkler made of plastic materials resistant to all agrochemicals & weather conditions. Specially designed for full coverage irrigation where optimal uniformity distribution of water is required. Low bridge shade, to improve uniformity distribution. Can be used in Frost mitigation and/or Cooling irrigation systems. Long-term reliable service. 86

87 GYRONET TURBO TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) CONSTANT K EXPONENT X MAXIMUM WORKING PRESSURE (BAR) WETTED DIAMETER 100 CM ABOVE GROUND (M) SWIVEL (ROTOR) CODE COLOR 200 Yellow Purple 250 Purple Purple 300 Green Purple 400 Blue Purple 500 Brown Purple PACKAGING DATA GYRONET TURBO QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 34 x Complete stand (120 cm) w/o stake x 26 x GYRONET TURBO Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL GyroNet Turbo GYR TRB 1/2" Male Threaded 1/2IC 200 l/h l/h l/h l/h 400 Head only Head cm microtube Head + XXX cm microtube HEAD ONLY 120CM W/OSTK STL W/OSTK Press fit F&S conn. to PE F&S conn. to FTN PFC F&S PE F&S FTN 500 l/h 500 *When selecting an undefined tube length, add the desired length in writing. GYR TRB 1/2IC GyroNet Turbo 87

88 GYRONET TURBO Head only Catalog number: (any of below 6 digits ) MODEL 1 UNIT 25 UNITS/BAG 100 UNITS/BAG GyroNet Turbo GYRONET TURBO ASSEMBLY STANDS GyroNet Turbo, Flow YYY, micro-tube ZZ XXX cm length, adapter sprinkler housing, without stake, press-fit connector to lateral pipe, Catalog number : (any of below 6 digits) MODEL 6*8 MM CM 9*12 MM CM 9*12 MM CM Missing catalog numbers available upon request Assembly stands include 6*8 mm or 9*12 mm black SPE micro-tube Other stand combinations can be ordered based on the attached flowchart which can help determine the desired product requirement GYRONET TURBO COMPONENTS GYRONET TURBO UPPER BEARING GYRONET TURBO BRIDGE GYRONET TURBO SWIVEL + ASSEMBLY SLEEVE GYRONET TURBO nozzles Catalog number : (any of below 6 digits) GYRONET TURBO BODY NOZZLE 200, Yellow , Purple , Green , Blue , Brown GyroNet Turbo

89

90 MEGANET ROTATING IMPACT SPRINKLER APPLICATIONS High water trajectory angle - for vegetables and open field crops, open field nurseries, crops germination, frost mitigation, cooling fruit orchards and roof dust cleaning. Low water trajectory angle - for under tree irrigation and shade/net houses. SPECIFICATIONS Sprinkler, 7 different nominal flow rates: 200, 250, 350, 450, 550, 650, 750 l/h. Nominal flow rates at 2.3 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Recommended filtration: 400 micron / 40 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim expert team's instructions. 2 types of water trajectory: High, 24 degrees Low, 15 degrees Inlet connector (4 models): 1/2" male threaded, to be glued 20 MM ISO or 1/2" ASTM, with anti drain feature. Code colored locking pins and caps for easy identification. 2 balanced water jets. Individual filter in each sprinkler. MegaNet sprinklers meet ISO 8026 standards (SI 1406) with production certified by the Israel Standards Institute (SII). FEATURES AND BENEFITS Two equal water jets assure perfectly balanced performance of the sprinkler without pushing it backwards. The closed and compact structure provides robustness to the sprinkler while preventing insect penetration into the nozzle and protecting mechanism parts during sprinkler conveyance. Each sprinkler unit has an individual filter to assure nozzle cleanliness and simplify cleaning when needed. The sprinkler is color-coded to easily distinguish it. Cap color denotes sprinkler flow rate, locking pin color denotes trajectory angle. Sprinkler's distribution uniformity which is respective to its flow rate and placement spacing, is of the highest in the market. Can be installed on solid sets or in removable field stands. Made of UV-protected materials, durable to all climate conditions and nutrients injected in agricultural applications. 90

91 MEGANET TECHNICAL DATA MODEL NOZZLE CODE COLOR NOZZLE SIZE (MM) CONSTANT K EXPONENT X MAXIMUM WORKING PRESSURE (BAR) WETTED DIAMETER (M) 100 CM ABOVE GROUND TRAJECTORY ANGLE 24D PIN CODE COLOR BLACK WETTED DIAMETER (M) 50 CM ABOVE GROUND TRAJECTORY ANGLE 15D PIN CODE COLOR GRAY 200 Yellow Purple Green Blue Brown Orange Red PACKAGING DATA MEGANET QUANTITY P/BOX UNITS BOX SIZE (CM X CM X CM) BOX WEIGHT (KG) BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGHT (KG) Head only x 34 x MEGANET Flowchart to determine the desired product definition How to use: To determine the desired product definition select one of every set of options displayed on the chart. EMITTER DISPERSION DEFLECTOR HEAD INLET CONNECTOR FLOW STAND ASSEMBLY CONNECTOR TO LATERAL MegaNet MGN High trajectory Low trajectory 24D 15D 1/2" Male threaded 20MM ISO to be glued 1/2" ASTM to be glued 1/2IC C20MM ISO C1/2" ASTM 200 l/h l/h l/h l/h 450 Head only Head cm microtube Head + XXX cm microtube HEAD ONLY 120CM W/OSTK STL W/OSTK Press fit F&S conn. to PE F&S conn. to FTN PFC F&S PE F&S FTN 1/2" Male threaded with AD 1/2IC AD feature 550 l/h l/h 650 *When selecting an undefined tube length, add the desired length in writing. 750 l/h 750 MGN MegaNet 91

92 MEGANET Head only Catalog number: (any of below 6 digits ) 1/2" THREADED INLET CONNECTOR 20 MM ISO INLET CONNECTOR 1/2" ASTM INLET CONNECTOR 1/2" THREADED INLET CONNECTOR + AD MODEL 24D 15D 24D 15D 24D 15D 24D 15D Missing catalog numbers available upon request MEGANET COMPONENTS MegaNet top mechanism Catalog number : (any of below 6 digits) MegaNet complete upper body Catalog number : (any of below 6 digits) 24D 15D 24D 15D MODEL MODEL MEGANET 1/2" THREADED INLET BODY MEGANET C20MM ISO GLUED INLET BODY MEGANET C1/2" ASTM GLUED INLET BODY MEGANET FILTER MEGANET SERVICE KEY MEGANET ROAD GUARD MegaNet

93 93

94 D-NET D ARM IMPACT SPRINKLER APPLICATIONS For vegetables and open field crops, open field nurseries, crop germination, cooling fruit orchard. FEATURES AND BENEFITS Unprecedented level of distribution uniformity: maximum water use efficiency due to the unique arm that offers outstandingly high uniformities. Respective to its flow rate and placement spacing, the sprinkler s distribution uniformity is of the highest in the market. Can be installed on solid sets or in removable field stands. Made of UV-protected materials, durable to all climate conditions and nutrients injected in agricultural applications. Can be incorporated with the entire Netafim sprinkler product offering: sprinkler stands, flexible pipes and other dedicated fittings specifically developed for offering complete and professional solutions. SPECIFICATIONS 5 different nominal flow rates: 510, 580, 680, 810, 940 l/h. Nominal flow rates at 2.5 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to Netafim expert team s instructions. Water trajectory: 24 degrees Inlet connector: 1/2 male threaded. Code colored nozzles for easy identification. PERFORMANCE TABLE 94 NOZZLE SIZE (MM) CODE COLOR Gray + lime green Purple + lime green Orange + lime green Green + lime green Blue + lime green WORKING PRESSURE (BAR) FLOW RATE (L/H) WETTED DIAMETER* (M) PRECIPITATION (MM/H) SPACING (M X M) 10 x x x x * at least 0.5 mm/h **Performance table prepared under laboratory conditions, sprinkler head 1.0 meter above ground CU = or > than 92% CU = or > 88% and < 92% CU = or > 86% and < 88% CU < 86%

95 PACKAGING DATA MODEL QUANTITY P/BOX UNITS BOX SIZE CM X CM X CM BOX WEIGTH KG BOXES P/PALLET TOTAL UNITS P/PALLET PALLET WEIGTH KG D-Net x 36 x D-NET 8550 CATALOG NUMBERS NOZZLE SIZE (MM) CODE COLOR FLOW RATE (L/H) * CATALOG NUMBER SPRINKLER ILLUSTRATION Gray + lime green Purple + lime green Orange + lime green Green + lime green Blue + lime green *Nominal flow rate at 2.5 bar working pressure D-NET 8550 SPRINKLER NOZZLES NOZZLE SIZE (MM) CODE COLOR CATALOG NUMBER PRODUCT DRAW IMP SPR STAND 9*12 120CM W/OSTK F&S PE Front nozzle 2.3 Grey Front nozzle 2.5 Purple Front nozzle 2.9 Orange Front nozzle 3.2 Green IMP SPR STAND 9*12 120CM W/OSTK F&S FLX Front nozzle 3.5 Blue Rear nozzle 1.8 Lime green D-Net

96 SPRINKLERS STANDS COMPLEMENTARY ACCESSORIES CONNECTORS AND STAND ACCESSORIES COMPLETE STAND W/O STAKE SPRINKLER HOUSING METER 6*8 TUBE + BARB/MALE CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD COMPLETE STAND W/O STAKE SPRINKLER HOUSING METER 9*12 TUBE + BARB/MALE CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB CONN. + STAKE ADAPTER THAT FIT A 8 MM ROD SPR STAND 9*12 120CM W/OSTK F&S PE DP8. SPRINKLER HOUSING METER 9*12 TUBE + BARB/MALE F&S CONN. + LOCKING SLEEVE, THESE 4 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX : FLAT FEMALE/BARB F&S CONN. + STAKE ADAPTER THAT FIT A 8 MM ROD SPR STAND9*12 120CM W/OSTK F&S FTN DP8 SPRINKLER HOUSING METER 9*12 TUBE + BARB/MALE F&S CONN. + LOCKING SLEEVE, THESE 4 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/1/2" MALE THREADED F&S CONN. + STAKE ADAPTER THAT FIT A 8 MM ROD COMPLETE STAND W/O STAKE SPRINKLER HOUSING METER 16 MM (ID 13.2 MM MM WALL THICKNESS) TUBE + BARB/ TUBE + BARB/MALE CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB CONN. + STAKE ADAPTER THAT FIT A 8 MM ROD COMPLETE STAND W/O STAKE FEMALE PRESS FIT CONN METER 8*6 TUBE + BARB/MALE F&S CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB S&F CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD COMPLETE STAND W/O STAKE FEMALE PRESS FIT CONN METER 6*8 TUBE + BARB/MALE CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD COMPLETE STAND W/O STAKE FEMALE PRESS FIT CONN METER 9*12 TUBE + BARB/MALE CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD COMPLETE STAND W/O STAKE FEMALE PRESS FIT CONN METER 9*12 TUBE + BARB/MALE F&S CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/BARB S&F CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD COMPLETE STAND W/O STAKE FEMALE PRESS FIT CONN METER 9*12 TUBE + BARB/MALE F&S CONN., THESE 3 PRODUCTS ARE SUPPLIED ASSEMBLED, AND AS SEPARATED PRODUCTS IN THE SAME BOX: FLAT FEMALE/1/2" MALE THREADED S&F CONN. + STAKE ADAPTER THAT FIT A 6 MM ROD MEGA-RISER 1/2" 0.4 METER LENGTH 1/2" MALE THREADED - 1/2" FEMALE THREADED MEGA-SUPPORTING ARM MEGA-BASE

97 SPR STAND F&S CONN FEMALE/BARB BROWN SPR STAND FTN F&S CONN FEMALE/ 1/2" MTH 1/2" FEMALE THREADED SPRINKLER HOUSING / BARB SPR STAND QUICK CONN MALE/BARB 12+"O" RING SPR STAND F&S CONN LOCKING SLEEVE For tube 6* For tube 9* For tube 16 mm (ID 13.2 mm mm wall thickness) MALE / BARB CONNECTOR SPRINKLER SOCKET START CONNECTOR TO PE For tube 6* For tube 9* For tube 16/ /2" / 1/2" Sprinkler socket /4" / 1/2" Sprinkler reducer coupling Barb for tube 9* Barb for tube 16 mm FLAT FEMALE / BARB CONNECTOR MALE PLUG START CONNECTOR TO PVC HOUSING ADAPTER Housing adapter to 6 mm rod (Blue) Housing adapter to 8 mm rod (Black) /4" X 1/2" IN-LINE PRESSURE REGULATOR Barb for tube 9* Barb for tube 16 mm REDUCTION NIPPLE 3/4" MALE - 1/2" MALE METAL ROD 6 mm diameter, 100 cm length mm diameter, 120 cm length mm diameter, 100 cm length mm diameter, 120 cm length SPRINKLER SOCKET 3/4" / 3/4" Sprinkler socket " / 3/4" Sprinkler reducer coupling BUSHING CONNECTOR 3/4" MALE - 1/2" FEMALE Sprinklers stands complementary accessories connectors and stand accessories

98 NETAFIM FLEXIBLE PIPES FLEXNET AND FLEXNET HP The industry s ideal piping solutions for mainline and distribution laterals applications. High-performance and cost-efficient products, FlexNet and FlexNet HP features unique integral welded outlets that lower installation costs while ensuring a secure, leakage-free connection between distribution pipes and laterals. Available in a wide range of diameters, Netafim's flagship pipe addresses the design requirements of any on-surface or subsurface irrigation deployment. A thermostatic collapsible irrigation pipe, offers many advantages over other pipe solutions. They are highly portable, flexible and light weight, thereby reducing manpower, freight, maintenance and storage requirements. Are also versatile and durable, enabling it to withstand the most stringent climatic and environmental conditions. The comprehensive Netafim flexible pipes solutions are equipped with connector kits and an array of branching and lateral fittings, making them compatible with all Netafim systems. Requiring no specialized installation tools and designed for Netafim's industry-leading recoiling machinery, the user friendly Netafim flexible pipes are extremely easy to layout and recoil. Rounding out Netafim's industry-leading drip irrigation offering, they are a cost-effective piping solution that meets the diverse needs of professional growers worldwide. 98

99 FLEXNET HP DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 100 METER 2"/51mm "/78mm FLEXNET DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 100 METER 2"/51mm "/78mm 5.0 DIAMETER DISTANCE BETWEEN OUTLETS (M) 2"/51mm 6.0 COIL LENGTH 96 METER 3"/78mm DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 102 METER 2"/51mm "/78mm 6.0 DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 98 METER 2"/51mm "/78mm DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 98 METER 2"/51mm "/78mm 7.0 DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 96 METER 2"/51mm "/78mm DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 96 METER 2"/51mm "/78mm 8.0 DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 99 METER 2"/51mm "/78mm DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 99 METER 2"/51mm "/78mm 9.0 DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 100 METER 2"/51mm "/78mm DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 100 METER 2"/51mm "/78mm 10.0 DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 96 METER 2"/51mm "/78mm 12.0 DIAMETER DISTANCE BETWEEN OUTLETS (M) COIL LENGTH 96 METER 2"/51mm "/78mm 12.0 Missing catalog numbers available upon request Different coil lengths achieve the need to supply at the beginning and the end of the coil "half" the distance between outlets Netafim flexible pipes FlexNet and FlexNet HP 99

100 MICRO-TUBES AND TUBES, COMPLEMENTARY ACCESSORIES SPE 6*8 MM BLACK MICRO-TUBE SPE 9*11 MM BLACK MICRO-TUBE SPE 9*12 MM BLACK MICRO-TUBE 100 meter coil meter coil meter coil meter coil meter coil meter coil SPE 6*8 MM BLACK MICRO-TUBE SPE 9*11 MM BLACK MICRO-TUBE PIECES SPE 9*12 MM BLACK MICRO-TUBE PIECES 60 cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length PE 16 MM BLACK PIPE (13.2 MM ID MM WT) SPE 4*6.5 MM BLACK MICRO-TUBE COILS 200 meter coil PE 16 MM BLACK PIPE (13.2 MM ID MM WT) PIECES 120 cm length meter coil meter coil SPE 4*6.5 MM BLACK MICRO-TUBE PIECES 30 cm length cm length cm length cm length cm length cm length cm length

101 SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + BARB CONNECTOR SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + BARB CONNECTOR + FEMALE CONNECTOR SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + MALE CONNECTOR + FEMALE CONNECTOR SPE 4*6.5 MM BLACK MICRO-TUBE PIECES + MALE CONNECTOR 30 cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length SSPE 4*6.5 MM GRAY MICRO-TUBE COILS 200 meter coil meter coil SSPE 4*6.5 MM GRAY MICRO-TUBE PIECES SSPE 4*6.5 MM GRAY MICRO-TUBE PIECES + BARB CONNECTOR + FEMALE CONNECTOR + ASSEMBLY STABILIZER SSPE 4*6.5 MM GRAY MICRO-TUBE PIECES + MALE CONNECTOR + FEMALE CONNECTOR + ASSEMBLY STABILIZER 15 cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length cm length Micro-tubes And Tubes, Complementary Accessories 101

102 FROSTIE FROST MITIGATION CONTROLLER. SINGLE STATION VALVE CONTROLLER POWERED BY 2 AA ALKALINE BATTERIES. BUILT IN PRECISION TEMPERATURE AND HUMIDITY SENSORS PRODUCTS DISPLAY BOX Complementary Accessories

103 TOOLS PUNCH 3 MM PUNCH 8 MM SPIRAL PUNCH 3 MM FOR 12 TO 32 MM PIPE DIAMETER PUNCH 3 MM + INSERTER PUNCH 8 MM + INSERTER SCREW PUNCH, 8 MM PUNCH 3 MM FOR 16 AND 20 MM PIPE DIAMETER CONNECTORS AND FITTINGS INSERTER